From b05c7193fd289ff697324caccf77adf9ffa76373 Mon Sep 17 00:00:00 2001 From: Henryk Heisig Date: Fri, 16 Jun 2017 15:26:30 +0200 Subject: ar71xx: add support for TP-Link Archer C58 v1 TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 6x LED, 3x button - UART header on PCB, RX, TX at TP4+5 (backside) QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to patch macaddress. Flash instruction: Use "factory" image directly in vendor GUI. Recovery method: 1. Set PC to fixed ip address 192.168.0.66/24. 2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and rename it to "tp_recovery.bin". 3. Start a tftp server with the file "tp_recovery.bin" in its root directory. 4. Turn off the router. 5. Press and hold Reset button. 6. Turn on router with the reset button pressed and wait ~15 seconds. 7. Release the reset button and after a short time the firmware should be transferred from the tftp server. 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f020000 +$filesize cp.b $fileaddr 0x9f020000 $filesize reset This commit is based on GitHub PR#1112 Signed-off-by: Henryk Heisig --- tools/firmware-utils/src/tplink-safeloader.c | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'tools/firmware-utils') diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 83bbd23..cc5b583 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -341,6 +341,41 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system", }, + /** Firmware layout for the C58v1 */ + { + .id = "ARCHER-C58-V1", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n" + "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + + .partitions = { + {"fs-uboot", 0x00000, 0x10000}, + {"default-mac", 0x10000, 0x00200}, + {"pin", 0x10200, 0x00200}, + {"product-info", 0x10400, 0x00100}, + {"partition-table", 0x10500, 0x00800}, + {"soft-version", 0x11300, 0x00200}, + {"support-list", 0x11500, 0x00100}, + {"device-id", 0x11600, 0x00100}, + {"profile", 0x11700, 0x03900}, + {"default-config", 0x15000, 0x04000}, + {"user-config", 0x19000, 0x04000}, + {"os-image", 0x20000, 0x150000}, + {"file-system", 0x170000, 0x678000}, + {"certyficate", 0x7e8000, 0x08000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the C59v1 */ { .id = "ARCHER-C59-V1", -- cgit v1.1