/*****************************************************************************
** FILE NAME : ifxusb_plat.h
** PROJECT : IFX USB sub-system V3
** MODULES : IFX USB sub-system Host and Device driver
** SRC VERSION : 3.2
** DATE : 1/Jan/2011
** AUTHOR : Chen, Howard
** DESCRIPTION : This file contains the Platform Specific constants, interfaces
** (functions and macros).
** FUNCTIONS :
** COMPILER : gcc
** REFERENCE : Synopsys DWC-OTG Driver 2.7
** COPYRIGHT : Copyright (c) 2010
** LANTIQ DEUTSCHLAND GMBH,
** Am Campeon 3, 85579 Neubiberg, Germany
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
** Version Control Section **
** $Author$
** $Date$
** $Revisions$
** $Log$ Revision history
*****************************************************************************/
/*
* This file contains code fragments from Synopsys HS OTG Linux Software Driver.
* For this code the following notice is applicable:
*
* ==========================================================================
*
* Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
* "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
* otherwise expressly agreed to in writing between Synopsys and you.
*
* The Software IS NOT an item of Licensed Software or Licensed Product under
* any End User Software License Agreement or Agreement for Licensed Product
* with Synopsys or any supplement thereto. You are permitted to use and
* redistribute this Software in source and binary forms, with or without
* modification, provided that redistributions of source code must retain this
* notice. You may not view, use, disclose, copy or distribute this file or
* any information contained herein except pursuant to this license grant from
* Synopsys. If you do not agree with this notice, including the disclaimer
* below, then you are not authorized to use the Software.
*
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
* ========================================================================== */
/*!
\defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros).
\ingroup IFXUSB_DRIVER_V3
\brief Maintain plateform specific definitions and macros in this file.
Each plateform has its own definition zone.
*/
/*!
\defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters
\ingroup IFXUSB_PLATEFORM_DEFINITION
*/
/*!
\defgroup IFXUSB_DBG_ROUTINE Routines for debug message
\ingroup IFXUSB_PLATEFORM_DEFINITION
*/
/*! \file ifxusb_plat.h
\ingroup IFXUSB_DRIVER_V3
\brief This file contains the Platform Specific constants, interfaces (functions and macros).
*/
#if !defined(__IFXUSB_PLAT_H__)
#define __IFXUSB_PLAT_H__
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <asm/io.h>
#define IFXUSB_IOMEM_SIZE 0x00001000
#define IFXUSB_FIFOMEM_SIZE 0x00010000
#define IFXUSB_FIFODBG_SIZE 0x00020000
/*!
\addtogroup IFXUSB_PLATEFORM_MEM_ADDR
*/
/*@{*/
#if defined(__UEIP__)
#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
#define IFXUSB_IRQ 62
#define IFXUSB_IOMEM_BASE 0x1e101000
#define IFXUSB_FIFOMEM_BASE 0x1e120000
#define IFXUSB_FIFODBG_BASE 0x1e140000
#define IFXUSB_OC_IRQ 159
#ifndef DANUBE_RCU_BASE_ADDR
#define DANUBE_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef DANUBE_CGU
#define DANUBE_CGU (0xBF103000)
#endif
#ifndef DANUBE_CGU_IFCCR
#define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
#endif
#ifndef DANUBE_PMU
#define DANUBE_PMU (KSEG1+0x1F102000)
#endif
#ifndef DANUBE_PMU_PWDCR
#define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
#endif
#ifndef DANUBE_GPIO_P0_OUT
#define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
#define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
#define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
#define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
#define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
#define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
#define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
#define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
#define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4
#define default_param_turn_around_time_fs 4
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 640
#define default_param_nperio_tx_fifo_size 640
#define default_param_perio_tx_fifo_size 768
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
// #define default_param_rx_fifo_size 1024
// #define default_param_nperio_tx_fifo_size 1016
// #define default_param_perio_tx_fifo_size_01 8
#define default_param_rx_fifo_size 1008
#define default_param_nperio_tx_fifo_size 1008
#define default_param_perio_tx_fifo_size_01 32
#else
#define default_param_rx_fifo_size 1024
#define default_param_nperio_tx_fifo_size 1024
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_AMAZON_SE__)
//#include <asm/amazon_se/amazon_se.h>
//#include <asm/amazon_se/irq.h>
#define IFXUSB_IRQ 39
#define IFXUSB_IOMEM_BASE 0x1e101000
#define IFXUSB_FIFOMEM_BASE 0x1e120000
#define IFXUSB_FIFODBG_BASE 0x1e140000
#define IFXUSB_OC_IRQ 20
#ifndef AMAZON_SE_RCU_BASE_ADDR
#define AMAZON_SE_RCU_BASE_ADDR (0xBF203000)
#endif
#define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
#define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
#define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
#ifndef AMAZON_SE_GPIO_P0_OUT
#define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
#define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
#define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
#define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
#define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
#define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
#define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#ifndef AMAZON_SE_CGU
#define AMAZON_SE_CGU (0xBF103000)
#endif
#ifndef AMAZON_SE_CGU_IFCCR
#define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
#endif
#ifndef AMAZON_SE_PMU
#define AMAZON_SE_PMU (KSEG1+0x1F102000)
#endif
#ifndef AMAZON_SE_PMU_PWDCR
#define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
#endif
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4 //(NoChange)
#define default_param_turn_around_time_fs 4 //(NoChange)
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
// #define default_param_rx_fifo_size 256
// #define default_param_nperio_tx_fifo_size 248
// #define default_param_perio_tx_fifo_size_01 8
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size_01 32
#else
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 256
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_AR9__)
#define IFXUSB1_IRQ 62
#define IFXUSB1_IOMEM_BASE 0x1E101000
#define IFXUSB1_FIFOMEM_BASE 0x1E120000
#define IFXUSB1_FIFODBG_BASE 0x1E140000
#define IFXUSB2_IRQ 91
#define IFXUSB2_IOMEM_BASE 0x1E106000
#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
#define IFXUSB_OC_IRQ 68
#ifndef AR9_RCU_BASE_ADDR
#define AR9_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef AR9_CGU
#define AR9_CGU (0xBF103000)
#endif
#ifndef AR9_CGU_IFCCR
#define AR9_CGU_IFCCR ((volatile unsigned long *)(AR9_CGU+ 0x0018))
#endif
#ifndef AR9_PMU
#define AR9_PMU (KSEG1+0x1F102000)
#endif
#ifndef AR9_PMU_PWDCR
#define AR9_PMU_PWDCR ((volatile unsigned long *)(AR9_PMU+0x001C))
#endif
#ifndef AR9_GPIO_P0_OUT
#define AR9_GPIO_P0_OUT (0xBF103000+0x10)
#define AR9_GPIO_P0_DIR (0xBF103000+0x18)
#define AR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AR9_GPIO_P0_OD (0xBF103000+0x24)
#define AR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AR9_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AR9_GPIO_P1_OUT (0xBF103000+0x40)
#define AR9_GPIO_P1_DIR (0xBF103000+0x48)
#define AR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AR9_GPIO_P1_OD (0xBF103000+0x54)
#define AR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AR9_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define AR9_RCU_USB1CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18))
#define AR9_RCU_USB2CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34))
#define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10))
#define AR9_USBCFG_ARB 7 //
#define AR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AR9_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4 //(NoChange)
#define default_param_turn_around_time_fs 4 //(NoChange)
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
// #define default_param_rx_fifo_size 256
// #define default_param_nperio_tx_fifo_size 248
// #define default_param_perio_tx_fifo_size_01 8
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size_01 32
#else
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 256
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_VR9__)
#define IFXUSB1_IRQ 62
#define IFXUSB1_IOMEM_BASE 0x1E101000
#define IFXUSB1_FIFOMEM_BASE 0x1E120000
#define IFXUSB1_FIFODBG_BASE 0x1E140000
#define IFXUSB2_IRQ 91
#define IFXUSB2_IOMEM_BASE 0x1E106000
#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
#define IFXUSB_OC_IRQ 60
#ifndef IFX_MPS
#define IFX_MPS (KSEG1+0x1F107000)
#endif
#ifndef IFX_MPS_CHIPID
#define IFX_MPS_CHIPID ((volatile unsigned long *)(IFX_MPS + 0x0344))
#endif
#ifndef VR9_RCU_BASE_ADDR
#define VR9_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef VR9_CGU
#define VR9_CGU (0xBF103000)
#endif
#ifndef VR9_CGU_IFCCR
#define VR9_CGU_IFCCR ((volatile unsigned long *)(VR9_CGU+ 0x0018))
#endif
#ifndef VR9_PMU
#define VR9_PMU (KSEG1+0x1F102000)
#endif
#ifndef VR9_PMU_PWDCR
#define VR9_PMU_PWDCR ((volatile unsigned long *)(VR9_PMU+0x001C))
#endif
#ifndef VR9_GPIO_P0_OUT
#define VR9_GPIO_P0_OUT (0xBF103000+0x10)
#define VR9_GPIO_P0_DIR (0xBF103000+0x18)
#define VR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define VR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define VR9_GPIO_P0_OD (0xBF103000+0x24)
#define VR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define VR9_GPIO_P0_PUDEN (0xBF103000+0x30)
#define VR9_GPIO_P1_OUT (0xBF103000+0x40)
#define VR9_GPIO_P1_DIR (0xBF103000+0x48)
#define VR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define VR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define VR9_GPIO_P1_OD (0xBF103000+0x54)
#define VR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define VR9_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define VR9_RCU_USB1CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18))
#define VR9_RCU_USB2CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34))
#define VR9_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x38))
#define VR9_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x3C))
#define VR9_RCU_USBRESET ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10))
#define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48))
#define VR9_USBCFG_ARB 7 //
#define VR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define VR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define VR9_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
// #define default_param_dma_burst_size 4 //(ALL)
//WA for AHB
#define default_param_dma_burst_size 0 //(ALL)
#define default_param_dma_burst_size_n 4 //(ALL)
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#if 0
#define default_param_rx_fifo_size 256
#define default_param_tx_fifo_size_00 -1
#define default_param_tx_fifo_size_01 -1
#define default_param_tx_fifo_size_02 -1
#else
#define default_param_rx_fifo_size 256
#define default_param_tx_fifo_size_00 32
#define default_param_tx_fifo_size_01 200
#define default_param_tx_fifo_size_02 8
#endif
#define default_param_tx_fifo_size_03 -1
#define default_param_tx_fifo_size_04 -1
#define default_param_tx_fifo_size_05 -1
#define default_param_tx_fifo_size_06 -1
#define default_param_tx_fifo_size_07 -1
#define default_param_tx_fifo_size_08 -1
#define default_param_tx_fifo_size_09 -1
#define default_param_tx_fifo_size_10 -1
#define default_param_tx_fifo_size_11 -1
#define default_param_tx_fifo_size_12 -1
#define default_param_tx_fifo_size_13 -1
#define default_param_tx_fifo_size_14 -1
#define default_param_tx_fifo_size_15 -1
#define default_param_dma_unalgned_tx -1
#define default_param_dma_unalgned_rx -1
#define default_param_thr_ctl -1
#define default_param_tx_thr_length -1
#define default_param_rx_thr_length -1
#endif //__IS_DEVICE__
#elif defined(__IS_AR10__)
#define IFXUSB1_IRQ 54
#define IFXUSB1_IOMEM_BASE 0x1E101000
#define IFXUSB1_FIFOMEM_BASE 0x1E120000
#define IFXUSB1_FIFODBG_BASE 0x1E140000
#define IFXUSB1_OC_IRQ 60
#define IFXUSB2_IRQ 83
#define IFXUSB2_IOMEM_BASE 0x1E106000
#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
#define IFXUSB2_OC_IRQ 56
#ifndef AR10_RCU_BASE_ADDR
#define AR10_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef AR10_CGU
#define AR10_CGU (0xBF103000)
#endif
#ifndef AR10_CGU_IFCCR
#define AR10_CGU_IFCCR ((volatile unsigned long *)(AR10_CGU+ 0x0018))
#endif
#ifndef AR10_PMU
#define AR10_PMU (KSEG1+0x1F102000)
#endif
#ifndef AR10_PMU_PWDCR
#define AR10_PMU_PWDCR ((volatile unsigned long *)(AR10_PMU+0x0044))
#endif
#ifndef AR10_GPIO_P0_OUT
#define AR10_GPIO_P0_OUT (0xBF103000+0x10)
#define AR10_GPIO_P0_DIR (0xBF103000+0x18)
#define AR10_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AR10_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AR10_GPIO_P0_OD (0xBF103000+0x24)
#define AR10_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AR10_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AR10_GPIO_P1_OUT (0xBF103000+0x40)
#define AR10_GPIO_P1_DIR (0xBF103000+0x48)
#define AR10_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AR10_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AR10_GPIO_P1_OD (0xBF103000+0x54)
#define AR10_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AR10_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define AR10_RCU_USB1CFG ((volatile unsigned long *)(AR10_RCU_BASE_ADDR + 0x18))
#define AR10_RCU_USB2CFG ((volatile unsigned long *)(AR10_RCU_BASE_ADDR + 0x34))
#define AR10_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(AR10_RCU_BASE_ADDR + 0x38))
#define AR10_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(AR10_RCU_BASE_ADDR + 0x3C))
#define AR10_RCU_USBRESET ((volatile unsigned long *)(AR10_RCU_BASE_ADDR + 0x10))
#define AR10_USBCFG_ARB 7 //
#define AR10_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AR10_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AR10_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
// #define default_param_dma_burst_size 4 //(ALL)
//WA for AHB
#define default_param_dma_burst_size 0 //(ALL)
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#if 0
#define default_param_rx_fifo_size 256
#define default_param_tx_fifo_size_00 -1
#define default_param_tx_fifo_size_01 -1
#define default_param_tx_fifo_size_02 -1
#else
#define default_param_rx_fifo_size 256
#define default_param_tx_fifo_size_00 32
#define default_param_tx_fifo_size_01 200
#define default_param_tx_fifo_size_02 8
#endif
#define default_param_tx_fifo_size_03 -1
#define default_param_tx_fifo_size_04 -1
#define default_param_tx_fifo_size_05 -1
#define default_param_tx_fifo_size_06 -1
#define default_param_tx_fifo_size_07 -1
#define default_param_tx_fifo_size_08 -1
#define default_param_tx_fifo_size_09 -1
#define default_param_tx_fifo_size_10 -1
#define default_param_tx_fifo_size_11 -1
#define default_param_tx_fifo_size_12 -1
#define default_param_tx_fifo_size_13 -1
#define default_param_tx_fifo_size_14 -1
#define default_param_tx_fifo_size_15 -1
#define default_param_dma_unalgned_tx -1
#define default_param_dma_unalgned_rx -1
#define default_param_thr_ctl -1
#define default_param_tx_thr_length -1
#define default_param_rx_thr_length -1
#endif //__IS_DEVICE__
#else // __IS_AR10__
#error "Please choose one platform!!"
#endif // __IS_VR9__
#else //UEIP
#if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
#define IFXUSB_IRQ 54
#define IFXUSB_IOMEM_BASE 0x1e101000
#define IFXUSB_FIFOMEM_BASE 0x1e120000
#define IFXUSB_FIFODBG_BASE 0x1e140000
#define IFXUSB_OC_IRQ 151
#ifndef DANUBE_RCU_BASE_ADDR
#define DANUBE_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef DANUBE_CGU
#define DANUBE_CGU (0xBF103000)
#endif
#ifndef DANUBE_CGU_IFCCR
#define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
#endif
#ifndef DANUBE_PMU
#define DANUBE_PMU (KSEG1+0x1F102000)
#endif
#ifndef DANUBE_PMU_PWDCR
#define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
#endif
#ifndef DANUBE_GPIO_P0_OUT
#define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
#define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
#define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
#define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
#define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
#define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
#define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
#define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
#define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4 //(NoChange)
#define default_param_turn_around_time_fs 4 //(NoChange)
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 640
#define default_param_nperio_tx_fifo_size 640
#define default_param_perio_tx_fifo_size 768
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
#define default_param_rx_fifo_size 1024
#define default_param_nperio_tx_fifo_size 1016
#define default_param_perio_tx_fifo_size_01 8
#else
#define default_param_rx_fifo_size 1024
#define default_param_nperio_tx_fifo_size 1024
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_AMAZON_SE__)
#include <asm/amazon_se/amazon_se.h>
//#include <asm/amazon_se/irq.h>
#define IFXUSB_IRQ 31
#define IFXUSB_IOMEM_BASE 0x1e101000
#define IFXUSB_FIFOMEM_BASE 0x1e120000
#define IFXUSB_FIFODBG_BASE 0x1e140000
#define IFXUSB_OC_IRQ 20
#define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
#define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
#define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
#ifndef AMAZON_SE_GPIO_P0_OUT
#define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
#define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
#define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
#define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
#define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
#define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
#define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#ifndef AMAZON_SE_CGU
#define AMAZON_SE_CGU (0xBF103000)
#endif
#ifndef AMAZON_SE_CGU_IFCCR
#define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
#endif
#ifndef AMAZON_SE_PMU
#define AMAZON_SE_PMU (KSEG1+0x1F102000)
#endif
#ifndef AMAZON_SE_PMU_PWDCR
#define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
#endif
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4 //(NoChange)
#define default_param_turn_around_time_fs 4 //(NoChange)
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 248
#define default_param_perio_tx_fifo_size_01 8
#else
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 256
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_AR9__)
#define IFXUSB1_IRQ 54
#define IFXUSB1_IOMEM_BASE 0x1E101000
#define IFXUSB1_FIFOMEM_BASE 0x1E120000
#define IFXUSB1_FIFODBG_BASE 0x1E140000
#define IFXUSB2_IRQ 83
#define IFXUSB2_IOMEM_BASE 0x1E106000
#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
#define IFXUSB_OC_IRQ 60
#ifndef AMAZON_S_RCU_BASE_ADDR
#define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef AMAZON_S_CGU
#define AMAZON_S_CGU (0xBF103000)
#endif
#ifndef AMAZON_S_CGU_IFCCR
#define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
#endif
#ifndef AMAZON_S_PMU
#define AMAZON_S_PMU (KSEG1+0x1F102000)
#endif
#ifndef AMAZON_S_PMU_PWDCR
#define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
#endif
#ifndef AMAZON_S_GPIO_P0_OUT
#define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
#define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
#define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
#define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
#define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
#define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
#define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
#define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
#define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
#define AMAZON_S_USBCFG_ARB 7 //
#define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
#define default_param_dma_burst_size 4
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 4 //(NoChange)
#define default_param_turn_around_time_fs 4 //(NoChange)
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#ifdef __DED_INTR__
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 248
#define default_param_perio_tx_fifo_size_01 8
#else
#define default_param_rx_fifo_size 256
#define default_param_nperio_tx_fifo_size 256
#define default_param_perio_tx_fifo_size_01 0
#endif
#define default_param_perio_tx_fifo_size_02 0
#define default_param_perio_tx_fifo_size_03 0
#define default_param_perio_tx_fifo_size_04 0
#define default_param_perio_tx_fifo_size_05 0
#define default_param_perio_tx_fifo_size_06 0
#define default_param_perio_tx_fifo_size_07 0
#define default_param_perio_tx_fifo_size_08 0
#define default_param_perio_tx_fifo_size_09 0
#define default_param_perio_tx_fifo_size_10 0
#define default_param_perio_tx_fifo_size_11 0
#define default_param_perio_tx_fifo_size_12 0
#define default_param_perio_tx_fifo_size_13 0
#define default_param_perio_tx_fifo_size_14 0
#define default_param_perio_tx_fifo_size_15 0
#endif //__IS_DEVICE__
#elif defined(__IS_VR9__)
#define IFXUSB1_IRQ 54
#define IFXUSB1_IOMEM_BASE 0x1E101000
#define IFXUSB1_FIFOMEM_BASE 0x1E120000
#define IFXUSB1_FIFODBG_BASE 0x1E140000
#define IFXUSB2_IRQ 83
#define IFXUSB2_IOMEM_BASE 0x1E106000
#define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
#define IFXUSB2_FIFODBG_BASE 0x1E1C0000
#define IFXUSB_OC_IRQ 68
#ifndef AMAZON_S_RCU_BASE_ADDR
#define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
#endif
#ifndef AMAZON_S_CGU
#define AMAZON_S_CGU (0xBF103000)
#endif
#ifndef AMAZON_S_CGU_IFCCR
#define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
#endif
#ifndef AMAZON_S_PMU
#define AMAZON_S_PMU (KSEG1+0x1F102000)
#endif
#ifndef AMAZON_S_PMU_PWDCR
#define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
#endif
#ifndef AMAZON_S_GPIO_P0_OUT
#define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
#define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
#define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
#define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
#define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
#define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
#define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
#define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
#define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
#define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
#define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
#define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
#define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
#define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
#endif
#define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
#define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
#define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
#define AMAZON_S_USBCFG_ARB 7 //
#define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
#define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
#define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
#define default_param_dma_burst_size 4 //(ALL)
#define default_param_speed IFXUSB_PARAM_SPEED_HIGH
#define default_param_max_transfer_size -1 //(Max, hwcfg)
#define default_param_max_packet_count -1 //(Max, hwcfg)
#define default_param_phy_utmi_width 16
#define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
#define default_param_timeout_cal_hs -1 //(NoChange)
#define default_param_timeout_cal_fs -1 //(NoChange)
#define default_param_data_fifo_size -1 //(Max, hwcfg)
#ifdef __IS_HOST__
#define default_param_host_channels -1 //(Max, hwcfg)
#define default_param_rx_fifo_size 240
#define default_param_nperio_tx_fifo_size 240
#define default_param_perio_tx_fifo_size 32
#endif //__IS_HOST__
#ifdef __IS_DEVICE__
#define default_param_rx_fifo_size 256
#define default_param_tx_fifo_size_00 -1
#define default_param_tx_fifo_size_01 -1
#define default_param_tx_fifo_size_02 -1
#define default_param_tx_fifo_size_03 -1
#define default_param_tx_fifo_size_04 -1
#define default_param_tx_fifo_size_05 -1
#define default_param_tx_fifo_size_06 -1
#define default_param_tx_fifo_size_07 -1
#define default_param_tx_fifo_size_08 -1
#define default_param_tx_fifo_size_09 -1
#define default_param_tx_fifo_size_10 -1
#define default_param_tx_fifo_size_11 -1
#define default_param_tx_fifo_size_12 -1
#define default_param_tx_fifo_size_13 -1
#define default_param_tx_fifo_size_14 -1
#define default_param_tx_fifo_size_15 -1
#define default_param_dma_unalgned_tx -1
#define default_param_dma_unalgned_rx -1
#define default_param_thr_ctl -1
#define default_param_tx_thr_length -1
#define default_param_rx_thr_length -1
#endif //__IS_DEVICE__
#else // __IS_VR9__
#error "Please choose one platform!!"
#endif // __IS_VR9__
#endif //UEIP
/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/
/////////////////////////////////////////////////////////////////////////
#ifdef __IS_HOST__
#if defined(CONFIG_USB_HOST_IFX_FORCE_USB11) || defined(__FORCE_USB11__)
#undef default_param_speed
#define default_param_speed IFXUSB_PARAM_SPEED_FULL
#endif
#endif
#ifdef __IS_DEVICE__
#if !defined(CONFIG_USB_GADGET_DUALSPEED) || defined(__FORCE_USB11__)
#undef default_param_speed
#define default_param_speed IFXUSB_PARAM_SPEED_FULL
#endif
#endif
/////////////////////////////////////////////////////////////////////////
static __inline__ void UDELAY( const uint32_t _usecs )
{
udelay( _usecs );
}
static __inline__ void MDELAY( const uint32_t _msecs )
{
mdelay( _msecs );
}
static __inline__ void SPIN_LOCK( spinlock_t *_lock )
{
spin_lock(_lock);
}
static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
{
spin_unlock(_lock);
}
#define SPIN_LOCK_IRQSAVE( _l, _f ) \
{ \
spin_lock_irqsave(_l,_f); \
}
#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \
{ \
spin_unlock_irqrestore(_l,_f); \
}
/////////////////////////////////////////////////////////////////////////
/*!
\addtogroup IFXUSB_DBG_ROUTINE
*/
/*@{*/
#ifdef __IS_HOST__
extern uint32_t h_dbg_lvl;
#endif
#ifdef __IS_DEVICE__
extern uint32_t d_dbg_lvl;
#endif
/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */
#define DBG_CIL (0x2)
/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */
#define DBG_CILV (0x20)
/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */
#define DBG_PCD (0x4)
/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */
#define DBG_PCDV (0x40)
/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */
#define DBG_HCD (0x8)
/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */
#define DBG_HCDV (0x80)
/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */
#define DBG_HCD_URB (0x800)
/*! \brief When debug level has any bit set, display debug messages */
#define DBG_ANY (0xFF)
/*! \brief All debug messages off */
#define DBG_OFF 0
#define DBG_ENTRY (0x8000)
#define IFXUSB "IFXUSB: "
/*!
\fn inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
\brief Set the Debug Level variable.
\param _new 32-bit mask of debug level.
\return previous debug level
*/
static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
{
#ifdef __IS_HOST__
uint32_t old = h_dbg_lvl;
h_dbg_lvl = _new;
#endif
#ifdef __IS_DEVICE__
uint32_t old = d_dbg_lvl;
d_dbg_lvl = _new;
#endif
return old;
}
#ifdef __DEBUG__
#ifdef __IS_HOST__
# define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
# define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl)
#endif
#ifdef __IS_DEVICE__
# define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
# define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl)
#endif
# define IFX_DEBUGP(x...) IFX_DEBUGPL(DBG_ANY, x )
#else
# define IFX_DEBUGPL(lvl, x...) do{}while(0)
# define IFX_DEBUGP(x...)
# define CHK_DEBUG_LEVEL(level) (0)
#endif //__DEBUG__
/* Print an Error message. */
#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x )
/* Print a Warning message. */
#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x )
/* Print a notice (normal but significant message). */
#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x )
/* Basic message printing. */
#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x )
/*@}*//*IFXUSB_DBG_ROUTINE*/
#endif //__IFXUSB_PLAT_H__