From 9faae5a37b266afca6914163316856c5ed4ec366 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 1 Nov 2015 10:04:41 +0100 Subject: [PATCH] USB: bcma: switch to GPIO descriptor for power control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far we were using simple (legacy) GPIO functions & some poor logic to control power. It got many drawbacks: we were ignoring OF flags (GPIO_ACTIVE_LOW), we were not setting direction to output and we were assuming gpio_request success all the time. Fix it by switching to gpiod functions and adding appropriate checks. Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/bcma-hcd.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -21,6 +21,7 @@ */ #include #include +#include #include #include #include @@ -36,6 +37,7 @@ MODULE_LICENSE("GPL"); struct bcma_hcd_device { struct platform_device *ehci_dev; struct platform_device *ohci_dev; + struct gpio_desc *gpio_desc; }; /* Wait for bitmask in a register to get set or cleared. @@ -228,19 +230,12 @@ static void bcma_hcd_init_chip_arm(struct bcma_device *dev) static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val) { - int gpio; + struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); - gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0); - if (!gpio_is_valid(gpio)) + if (IS_ERR_OR_NULL(usb_dev->gpio_desc)) return; - if (val) { - gpio_request(gpio, "bcma-hcd-gpio"); - gpio_set_value(gpio, 1); - } else { - gpio_set_value(gpio, 0); - gpio_free(gpio); - } + gpiod_set_value(usb_dev->gpio_desc, val); } static const struct usb_ehci_pdata ehci_pdata = { @@ -314,7 +309,11 @@ static int bcma_hcd_probe(struct bcma_device *dev) if (!usb_dev) return -ENOMEM; - bcma_hci_platform_power_gpio(dev, true); + if (dev->dev.of_node) + usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc", + &dev->dev.of_node->fwnode); + if (!IS_ERR_OR_NULL(usb_dev->gpio_desc)) + gpiod_direction_output(usb_dev->gpio_desc, 1); switch (dev->id.id) { case BCMA_CORE_NS_USB20: