From 023b465fbab6f672219706bbe19a9fbfa38c6192 Mon Sep 17 00:00:00 2001
From: Jan Grulich <jan@grulich.eu>
Date: Mon, 24 Aug 2015 16:03:47 +0100
Subject: [PATCH 170/171] RaspiDAC3 support
Signed-off-by: Jan Grulich <jan@grulich.eu>
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 6 +
arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 45 ++++++
arch/arm/configs/bcm2709_defconfig | 1 +
arch/arm/configs/bcmrpi_defconfig | 1 +
sound/soc/bcm/Kconfig | 8 +
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/raspidac3.c | 191 +++++++++++++++++++++++
8 files changed, 255 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts
create mode 100644 sound/soc/bcm/raspidac3.c
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -37,6 +37,7 @@ dtb-$(RPI_DT_OVERLAYS) += pitft28-resist
dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pwm-2chan-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += raspidac3-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-display-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-ft5406-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -455,6 +455,12 @@ Params: pin Output
clock PWM clock frequency (informational)
+Name: raspidac3
+Info: Configures the RaspiDAV Rev.3x audio card
+Load: dtoverlay=raspidac3
+Params: <None>
+
+
Name: rpi-dac
Info: Configures the RPi DAC audio card
Load: dtoverlay=rpi-dac
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts
@@ -0,0 +1,45 @@
+// Definitions for RaspiDACv3
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2708";
+
+ fragment@0 {
+ target = <&sound>;
+ __overlay__ {
+ compatible = "jg,raspidacv3";
+ i2s-controller = <&i2s>;
+ status = "okay";
+ };
+ };
+
+ fragment@1 {
+ target = <&i2s>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&i2c1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ pcm5122@4c {
+ #sound-dai-cells = <0>;
+ compatible = "ti,pcm5122";
+ reg = <0x4c>;
+ status = "okay";
+ };
+
+ tpa6130a2: tpa6130a2@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+ status = "okay";
+ };
+ };
+ };
+};
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -830,6 +830,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
CONFIG_SND_BCM2708_SOC_RPI_DAC=m
CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
+CONFIG_SND_BCM2708_SOC_RASPIDAC3=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SOUND_PRIME=m
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -823,6 +823,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
CONFIG_SND_BCM2708_SOC_RPI_DAC=m
CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
+CONFIG_SND_BCM2708_SOC_RASPIDAC3=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SOUND_PRIME=m
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -67,3 +67,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC
select SND_SOC_PCM512x_I2C
help
Say Y or M if you want to add support for IQaudIO-DAC.
+
+config SND_BCM2708_SOC_RASPIDAC3
+ tristate "Support for RaspiDAC Rev.3x"
+ depends on SND_BCM2708_SOC_I2S
+ select SND_SOC_PCM512x_I2C
+ select SND_SOC_TPA6130A2
+ help
+ Say Y or M if you want to add support for RaspiDAC Rev.3x.
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -16,6 +16,7 @@ snd-soc-hifiberry-amp-objs := hifiberry_
snd-soc-rpi-dac-objs := rpi-dac.o
snd-soc-rpi-proto-objs := rpi-proto.o
snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+snd-soc-raspidac3-objs := raspidac3.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_A
obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
--- /dev/null
+++ b/sound/soc/bcm/raspidac3.c
@@ -0,0 +1,191 @@
+/*
+ * ASoC Driver for RaspiDAC v3
+ *
+ * Author: Jan Grulich <jan@grulich.eu>
+ * Copyright 2015
+ * based on code by Daniel Matuschek <daniel@hifiberry.com>
+ * based on code by Florian Meier <florian.meier@koalo.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/pcm512x.h"
+#include "../codecs/tpa6130a2.h"
+
+/* sound card init */
+static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd)
+{
+ int ret;
+ struct snd_soc_card *card = rtd->card;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08);
+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
+
+ ret = snd_soc_limit_volume(codec, "Digital Playback Volume", 207);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
+ else {
+ struct snd_kcontrol *kctl;
+
+ ret = tpa6130a2_add_controls(codec);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to add TPA6130A2 controls: %d\n",
+ ret);
+ ret = snd_soc_limit_volume(codec,
+ "TPA6130A2 Headphone Playback Volume",
+ 54);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n",
+ ret);
+ kctl = snd_soc_card_get_kcontrol(card,
+ "TPA6130A2 Headphone Playback Volume");
+ if (kctl) {
+ strcpy(kctl->id.name, "Headphones Playback Volume");
+ /* disable the volume dB scale so alsamixer works */
+ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
+ }
+
+ kctl = snd_soc_card_get_kcontrol(card,
+ "TPA6130A2 Headphone Playback Switch");
+ if (kctl)
+ strcpy(kctl->id.name, "Headphones Playback Switch");
+ }
+
+ return 0;
+}
+
+/* set hw parameters */
+static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* startup */
+static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) {
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08);
+ tpa6130a2_stereo_enable(codec, 1);
+ return 0;
+}
+
+/* shutdown */
+static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) {
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
+ tpa6130a2_stereo_enable(codec, 0);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_raspidac3_ops = {
+ .hw_params = snd_rpi_raspidac3_hw_params,
+ .startup = snd_rpi_raspidac3_startup,
+ .shutdown = snd_rpi_raspidac3_shutdown,
+};
+
+/* interface setup */
+static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = {
+{
+ .name = "RaspiDAC Rev.3x",
+ .stream_name = "RaspiDAC HiFi",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm512x-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm512x.1-004c",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_rpi_raspidac3_ops,
+ .init = snd_rpi_raspidac3_init,
+},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_raspidac3 = {
+ .name = "RaspiDAC Rev.3x HiFi Audio Card",
+ .dai_link = snd_rpi_raspidac3_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai),
+};
+
+/* sound card test */
+static int snd_rpi_raspidac3_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_rpi_raspidac3.dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0];
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+ }
+
+ ret = snd_soc_register_card(&snd_rpi_raspidac3);
+ if (ret)
+ dev_err(&pdev->dev,
+ "snd_soc_register_card() failed: %d\n", ret);
+
+ return ret;
+}
+
+/* sound card disconnect */
+static int snd_rpi_raspidac3_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_rpi_raspidac3);
+}
+
+static const struct of_device_id raspidac3_of_match[] = {
+ { .compatible = "jg,raspidacv3", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, raspidac3_of_match);
+
+/* sound card platform driver */
+static struct platform_driver snd_rpi_raspidac3_driver = {
+ .driver = {
+ .name = "snd-rpi-raspidac3",
+ .owner = THIS_MODULE,
+ .of_match_table = raspidac3_of_match,
+ },
+ .probe = snd_rpi_raspidac3_probe,
+ .remove = snd_rpi_raspidac3_remove,
+};
+
+module_platform_driver(snd_rpi_raspidac3_driver);
+
+MODULE_AUTHOR("Jan Grulich <jan@grulich.eu>");
+MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x");
+MODULE_LICENSE("GPL v2");