From 4f6a7b0ff6afd26d069c4f6b8d3c4fb4b0cc186b Mon Sep 17 00:00:00 2001 From: popcornmix Date: Sun, 12 May 2013 12:24:19 +0100 Subject: [PATCH 027/381] Main bcm2708/bcm2709 linux port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: popcornmix Signed-off-by: Noralf Trønnes --- arch/arm/Kconfig | 49 +++ arch/arm/Kconfig.debug | 8 + arch/arm/Makefile | 2 + arch/arm/kernel/head.S | 8 + arch/arm/kernel/process.c | 10 + arch/arm/mach-bcm2708/Kconfig | 23 ++ arch/arm/mach-bcm2708/Makefile | 5 + arch/arm/mach-bcm2708/Makefile.boot | 3 + arch/arm/mach-bcm2708/bcm2708.c | 231 ++++++++++++ arch/arm/mach-bcm2708/include/mach/debug-macro.S | 22 ++ arch/arm/mach-bcm2708/include/mach/io.h | 27 ++ arch/arm/mach-bcm2708/include/mach/memory.h | 57 +++ arch/arm/mach-bcm2708/include/mach/platform.h | 112 ++++++ arch/arm/mach-bcm2708/include/mach/system.h | 37 ++ arch/arm/mach-bcm2708/include/mach/uncompress.h | 84 +++++ arch/arm/mach-bcm2708/include/mach/vmalloc.h | 20 ++ arch/arm/mach-bcm2709/Kconfig | 16 + arch/arm/mach-bcm2709/Makefile | 5 + arch/arm/mach-bcm2709/Makefile.boot | 3 + arch/arm/mach-bcm2709/bcm2709.c | 380 ++++++++++++++++++++ arch/arm/mach-bcm2709/include/mach/debug-macro.S | 22 ++ arch/arm/mach-bcm2709/include/mach/entry-macro.S | 123 +++++++ arch/arm/mach-bcm2709/include/mach/io.h | 27 ++ arch/arm/mach-bcm2709/include/mach/memory.h | 57 +++ arch/arm/mach-bcm2709/include/mach/platform.h | 188 ++++++++++ arch/arm/mach-bcm2709/include/mach/system.h | 37 ++ arch/arm/mach-bcm2709/include/mach/uncompress.h | 84 +++++ arch/arm/mach-bcm2709/include/mach/vc_mem.h | 35 ++ arch/arm/mach-bcm2709/include/mach/vmalloc.h | 20 ++ arch/arm/mach-bcm2709/vc_mem.c | 431 +++++++++++++++++++++++ arch/arm/mm/Kconfig | 2 +- arch/arm/mm/proc-v6.S | 15 +- arch/arm/mm/proc-v7.S | 1 + arch/arm/tools/mach-types | 2 + drivers/clocksource/Makefile | 2 +- drivers/irqchip/Makefile | 3 + include/linux/mmc/host.h | 1 + 37 files changed, 2147 insertions(+), 5 deletions(-) create mode 100644 arch/arm/mach-bcm2708/Kconfig create mode 100644 arch/arm/mach-bcm2708/Makefile create mode 100644 arch/arm/mach-bcm2708/Makefile.boot create mode 100644 arch/arm/mach-bcm2708/bcm2708.c create mode 100644 arch/arm/mach-bcm2708/include/mach/debug-macro.S create mode 100644 arch/arm/mach-bcm2708/include/mach/io.h create mode 100644 arch/arm/mach-bcm2708/include/mach/memory.h create mode 100644 arch/arm/mach-bcm2708/include/mach/platform.h create mode 100644 arch/arm/mach-bcm2708/include/mach/system.h create mode 100644 arch/arm/mach-bcm2708/include/mach/uncompress.h create mode 100644 arch/arm/mach-bcm2708/include/mach/vmalloc.h create mode 100644 arch/arm/mach-bcm2709/Kconfig create mode 100644 arch/arm/mach-bcm2709/Makefile create mode 100644 arch/arm/mach-bcm2709/Makefile.boot create mode 100644 arch/arm/mach-bcm2709/bcm2709.c create mode 100644 arch/arm/mach-bcm2709/include/mach/debug-macro.S create mode 100644 arch/arm/mach-bcm2709/include/mach/entry-macro.S create mode 100644 arch/arm/mach-bcm2709/include/mach/io.h create mode 100644 arch/arm/mach-bcm2709/include/mach/memory.h create mode 100644 arch/arm/mach-bcm2709/include/mach/platform.h create mode 100644 arch/arm/mach-bcm2709/include/mach/system.h create mode 100644 arch/arm/mach-bcm2709/include/mach/uncompress.h create mode 100644 arch/arm/mach-bcm2709/include/mach/vc_mem.h create mode 100644 arch/arm/mach-bcm2709/include/mach/vmalloc.h create mode 100644 arch/arm/mach-bcm2709/vc_mem.c --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -317,6 +317,52 @@ choice default ARCH_VERSATILE if !MMU default ARCH_MULTIPLATFORM if MMU +config ARCH_BCM2708 + bool "Broadcom BCM2708 family" + select CPU_V6 + select ARM_AMBA + select CLKSRC_MMIO + select CLKSRC_OF if OF + select HAVE_SCHED_CLOCK + select NEED_MACH_GPIO_H + select NEED_MACH_MEMORY_H + select COMMON_CLK + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select ARM_ERRATA_411920 + select MACH_BCM2708 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select VC4 + select FIQ + help + This enables support for Broadcom BCM2708 boards. + +config ARCH_BCM2709 + bool "Broadcom BCM2709 family" + select CPU_V7 + select HAVE_SMP + select ARM_AMBA + select MIGHT_HAVE_CACHE_L2X0 + select HAVE_SCHED_CLOCK + select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H + select COMMON_CLK + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select MACH_BCM2709 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select MFD_SYSCON + select VC4 + select FIQ + select USE_OF + select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for Broadcom BCM2709 boards. + config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU @@ -808,6 +854,9 @@ config ARCH_VIRT # Kconfigs may be included either alphabetically (according to the # plat- suffix) or along side the corresponding mach-* source. # +source "arch/arm/mach-bcm2708/Kconfig" +source "arch/arm/mach-bcm2709/Kconfig" + source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-alpine/Kconfig" --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1240,6 +1240,14 @@ choice options; the platform specific options are deprecated and will be soon removed. + config DEBUG_BCM2708_UART0 + bool "Broadcom BCM270X UART0 (PL011)" + depends on ARCH_BCM2708 || ARCH_BCM2709 + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + endchoice config DEBUG_EXYNOS_UART --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -159,6 +159,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +machine-$(CONFIG_ARCH_BCM2708) += bcm2708 +machine-$(CONFIG_ARCH_BCM2709) += bcm2709 machine-$(CONFIG_ARCH_ALPINE) += alpine machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -700,6 +700,14 @@ ARM_BE8(rev16 ip, ip) ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b ret lr + nop + nop + nop + nop + nop + nop + nop + nop #endif ENDPROC(__fixup_a_pv_table) --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -91,6 +91,16 @@ void arch_cpu_idle_exit(void) ledtrig_cpu(CPU_LED_IDLE_END); } +char bcm2708_reboot_mode = 'h'; + +int __init reboot_setup(char *str) +{ + bcm2708_reboot_mode = str[0]; + return 1; +} + +__setup("reboot=", reboot_setup); + void __show_regs(struct pt_regs *regs) { unsigned long flags; --- /dev/null +++ b/arch/arm/mach-bcm2708/Kconfig @@ -0,0 +1,23 @@ +menu "Broadcom BCM2708 Implementations" + depends on ARCH_BCM2708 + +config MACH_BCM2708 + bool "Broadcom BCM2708 Development Platform" + select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H + select CPU_V6 + select USE_OF + select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_BCM2835 + help + Include support for the Broadcom(R) BCM2708 platform. + +config BCM2708_NOL2CACHE + bool "Videocore L2 cache disable" + depends on MACH_BCM2708 + default n + help + Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. + +endmenu --- /dev/null +++ b/arch/arm/mach-bcm2708/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-$(CONFIG_MACH_BCM2708) += bcm2708.o --- /dev/null +++ b/arch/arm/mach-bcm2708/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 --- /dev/null +++ b/arch/arm/mach-bcm2708/bcm2708.c @@ -0,0 +1,231 @@ +/* + * linux/arch/arm/mach-bcm2708/bcm2708.c + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to + * give us IO access only to 64Mbytes of physical memory (26 bits). We could + * represent this window by setting our dmamasks to 26 bits but, in fact + * we're not going to use addresses outside this range (they're not in real + * memory) so we don't bother. + * + * In the future we might include code to use this IOMMU to remap other + * physical addresses onto VideoCore memory then the use of 32-bits would be + * more legitimate. + */ + +/* command line parameters */ +static unsigned boardrev, serial; +static unsigned reboot_part = 0; + +static struct map_desc bcm2708_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(ARMCTRL_BASE), + .pfn = __phys_to_pfn(ARMCTRL_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(UART0_BASE), + .pfn = __phys_to_pfn(UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(UART1_BASE), + .pfn = __phys_to_pfn(UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(DMA_BASE), + .pfn = __phys_to_pfn(DMA_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(MCORE_BASE), + .pfn = __phys_to_pfn(MCORE_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(ST_BASE), + .pfn = __phys_to_pfn(ST_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(USB_BASE), + .pfn = __phys_to_pfn(USB_BASE), + .length = SZ_128K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(PM_BASE), + .pfn = __phys_to_pfn(PM_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(GPIO_BASE), + .pfn = __phys_to_pfn(GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE} +}; + +void __init bcm2708_map_io(void) +{ + iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc)); +} + +int calc_rsts(int partition) +{ + return PM_PASSWORD | + ((partition & (1 << 0)) << 0) | + ((partition & (1 << 1)) << 1) | + ((partition & (1 << 2)) << 2) | + ((partition & (1 << 3)) << 3) | + ((partition & (1 << 4)) << 4) | + ((partition & (1 << 5)) << 5); +} + +static void bcm2708_restart(enum reboot_mode mode, const char *cmd) +{ + extern char bcm2708_reboot_mode; + uint32_t pm_rstc, pm_wdog; + uint32_t timeout = 10; + uint32_t pm_rsts = 0; + + if(bcm2708_reboot_mode == 'q') + { + // NOOBS < 1.3 booting with reboot=q + pm_rsts = readl(__io_address(PM_RSTS)); + pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET; + } + else if(bcm2708_reboot_mode == 'p') + { + // NOOBS < 1.3 halting + pm_rsts = readl(__io_address(PM_RSTS)); + pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET; + } + else + { + pm_rsts = calc_rsts(reboot_part); + } + + writel(pm_rsts, __io_address(PM_RSTS)); + + /* Setup watchdog for reset */ + pm_rstc = readl(__io_address(PM_RSTC)); + + pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) + pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; + + writel(pm_wdog, __io_address(PM_WDOG)); + writel(pm_rstc, __io_address(PM_RSTC)); +} + +/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */ +static void bcm2708_power_off(void) +{ + extern char bcm2708_reboot_mode; + if(bcm2708_reboot_mode == 'q') + { + // NOOBS < v1.3 + bcm2708_restart('p', ""); + } + else + { + /* partition 63 is special code for HALT the bootloader knows not to boot*/ + reboot_part = 63; + /* continue with normal reset mechanism */ + bcm2708_restart(0, ""); + } +} + +static void __init bcm2708_init_uart1(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart"); + if (of_device_is_available(np)) { + pr_info("bcm2708: Mini UART enabled\n"); + writel(1, __io_address(UART1_BASE + 0x4)); + } +} + +void __init bcm2708_init(void) +{ + int ret; + + vc_cma_early_init(); + + pm_power_off = bcm2708_power_off; + + ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, + NULL); + if (ret) { + pr_err("of_platform_populate failed: %d\n", ret); + BUG(); + } + + bcm2708_init_uart1(); + + system_rev = boardrev; + system_serial_low = serial; +} + +void __init bcm2708_init_early(void) +{ + /* + * Some devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_4M); +} + +static void __init board_reserve(void) +{ + vc_cma_reserve(); +} + +static const char * const bcm2708_compat[] = { + "brcm,bcm2708", + NULL +}; + +MACHINE_START(BCM2708, "BCM2708") + /* Maintainer: Broadcom Europe Ltd. */ + .map_io = bcm2708_map_io, + .init_machine = bcm2708_init, + .init_early = bcm2708_init_early, + .reserve = board_reserve, + .restart = bcm2708_restart, + .dt_compat = bcm2708_compat, +MACHINE_END + +module_param(boardrev, uint, 0644); +module_param(serial, uint, 0644); +module_param(reboot_part, uint, 0644); --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* arch/arm/mach-bcm2708/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include + + .macro addruart, rp, rv, tmp + ldr \rp, =UART0_BASE + ldr \rv, =IO_ADDRESS(UART0_BASE) + .endm + +#include --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-bcm2708/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/memory.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-bcm2708/include/mach/memory.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* Memory overview: + + [ARMcore] <--virtual addr--> + [ARMmmu] <--physical addr--> + [GERTmap] <--bus add--> + [VCperiph] + +*/ + +/* + * Physical DRAM offset. + */ +#define BCM_PLAT_PHYS_OFFSET UL(0x00000000) +#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ + +#ifdef CONFIG_BCM2708_NOL2CACHE + #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ +#else + #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ +#endif + +/* We're using the memory at 64M in the VideoCore for Linux - this adjustment + * will provide the offset into this area as well as setting the bits that + * stop the L1 and L2 cache from being used + * + * WARNING: this only works because the ARM is given memory at a fixed location + * (ARMMEM_OFFSET) + */ +#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) +#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) +#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) +#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) +#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/platform.h @@ -0,0 +1,112 @@ +/* + * arch/arm/mach-bcm2708/include/mach/platform.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _BCM2708_PLATFORM_H +#define _BCM2708_PLATFORM_H + + +/* macros to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) + +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + + +/* + * SDRAM + */ +#define BCM2708_SDRAM_BASE 0x00000000 + +/* + * Logic expansion modules + * + */ + + +/* ------------------------------------------------------------------------ + * BCM2708 ARMCTRL Registers + * ------------------------------------------------------------------------ + */ + +#define HW_REGISTER_RW(addr) (addr) +#define HW_REGISTER_RO(addr) (addr) + +/* + * Definitions and addresses for the ARM CONTROL logic + * This file is manually generated. + */ + +#define BCM2708_PERI_BASE 0x20000000 +#define IC0_BASE (BCM2708_PERI_BASE + 0x2000) +#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ +#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */ +#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ +#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ +#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ +#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */ +#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */ +#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ +#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ +#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ +#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */ +#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ +#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ +#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ +#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ +#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ +#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ +#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ +#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ + +#define ARMCTRL_BASE (ARM_BASE + 0x000) +#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ +#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ +#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ + +/* + * Watchdog + */ +#define PM_RSTC (PM_BASE+0x1c) +#define PM_RSTS (PM_BASE+0x20) +#define PM_WDOG (PM_BASE+0x24) + +#define PM_WDOG_RESET 0000000000 +#define PM_PASSWORD 0x5a000000 +#define PM_WDOG_TIME_SET 0x000fffff +#define PM_RSTC_WRCFG_CLR 0xffffffcf +#define PM_RSTC_WRCFG_SET 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 +#define PM_RSTC_RESET 0x00000102 + +#define PM_RSTS_HADPOR_SET 0x00001000 +#define PM_RSTS_HADSRH_SET 0x00000400 +#define PM_RSTS_HADSRF_SET 0x00000200 +#define PM_RSTS_HADSRQ_SET 0x00000100 +#define PM_RSTS_HADWRH_SET 0x00000040 +#define PM_RSTS_HADWRF_SET 0x00000020 +#define PM_RSTS_HADWRQ_SET 0x00000010 +#define PM_RSTS_HADDRH_SET 0x00000004 +#define PM_RSTS_HADDRF_SET 0x00000002 +#define PM_RSTS_HADDRQ_SET 0x00000001 + +#define UART0_CLOCK 3000000 + +#endif + +/* END */ --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-bcm2708/include/mach/system.h + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/uncompress.h @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-bcn2708/include/mach/uncompress.h + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#define UART_BAUD 115200 + +#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR) +#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR) +#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD) +#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD) +#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH) +#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) + barrier(); + + __raw_writel(c, BCM2708_UART_DR); +} + +static inline void flush(void) +{ + int fr; + + do { + fr = __raw_readl(BCM2708_UART_FR); + barrier(); + } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); +} + +static inline void arch_decomp_setup(void) +{ + int temp, div, rem, frac; + + temp = 16 * UART_BAUD; + div = UART0_CLOCK / temp; + rem = UART0_CLOCK % temp; + temp = (8 * rem) / UART_BAUD; + frac = (temp >> 1) + (temp & 1); + + /* Make sure the UART is disabled before we start */ + __raw_writel(0, BCM2708_UART_CR); + + /* Set the baud rate */ + __raw_writel(div, BCM2708_UART_IBRD); + __raw_writel(frac, BCM2708_UART_FBRD); + + /* Set the UART to 8n1, FIFO enabled */ + __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); + + /* Enable the UART */ + __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, + BCM2708_UART_CR); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() --- /dev/null +++ b/arch/arm/mach-bcm2708/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-bcm2708/include/mach/vmalloc.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (0xe8000000) --- /dev/null +++ b/arch/arm/mach-bcm2709/Kconfig @@ -0,0 +1,16 @@ +menu "Broadcom BCM2709 Implementations" + depends on ARCH_BCM2709 + +config MACH_BCM2709 + bool "Broadcom BCM2709 Development Platform" + help + Include support for the Broadcom(R) BCM2709 platform. + +config BCM2708_NOL2CACHE + bool "Videocore L2 cache disable" + depends on MACH_BCM2709 + default y + help + Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. + +endmenu --- /dev/null +++ b/arch/arm/mach-bcm2709/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-$(CONFIG_MACH_BCM2709) += bcm2709.o --- /dev/null +++ b/arch/arm/mach-bcm2709/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 --- /dev/null +++ b/arch/arm/mach-bcm2709/bcm2709.c @@ -0,0 +1,380 @@ +/* + * linux/arch/arm/mach-bcm2709/bcm2709.c + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include + +/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to + * give us IO access only to 64Mbytes of physical memory (26 bits). We could + * represent this window by setting our dmamasks to 26 bits but, in fact + * we're not going to use addresses outside this range (they're not in real + * memory) so we don't bother. + * + * In the future we might include code to use this IOMMU to remap other + * physical addresses onto VideoCore memory then the use of 32-bits would be + * more legitimate. + */ + +/* command line parameters */ +static unsigned boardrev, serial; +static unsigned reboot_part = 0; + +static struct map_desc bcm2709_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(ARMCTRL_BASE), + .pfn = __phys_to_pfn(ARMCTRL_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(UART0_BASE), + .pfn = __phys_to_pfn(UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(UART1_BASE), + .pfn = __phys_to_pfn(UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(DMA_BASE), + .pfn = __phys_to_pfn(DMA_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(MCORE_BASE), + .pfn = __phys_to_pfn(MCORE_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(ST_BASE), + .pfn = __phys_to_pfn(ST_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(USB_BASE), + .pfn = __phys_to_pfn(USB_BASE), + .length = SZ_128K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(PM_BASE), + .pfn = __phys_to_pfn(PM_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(GPIO_BASE), + .pfn = __phys_to_pfn(GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, + { + .virtual = IO_ADDRESS(ARM_LOCAL_BASE), + .pfn = __phys_to_pfn(ARM_LOCAL_BASE), + .length = SZ_4K, + .type = MT_DEVICE}, +}; + +void __init bcm2709_map_io(void) +{ + iotable_init(bcm2709_io_desc, ARRAY_SIZE(bcm2709_io_desc)); +} + +int calc_rsts(int partition) +{ + return PM_PASSWORD | + ((partition & (1 << 0)) << 0) | + ((partition & (1 << 1)) << 1) | + ((partition & (1 << 2)) << 2) | + ((partition & (1 << 3)) << 3) | + ((partition & (1 << 4)) << 4) | + ((partition & (1 << 5)) << 5); +} + +static void bcm2709_restart(enum reboot_mode mode, const char *cmd) +{ + extern char bcm2708_reboot_mode; + uint32_t pm_rstc, pm_wdog; + uint32_t timeout = 10; + uint32_t pm_rsts = 0; + + if(bcm2708_reboot_mode == 'q') + { + // NOOBS < 1.3 booting with reboot=q + pm_rsts = readl(__io_address(PM_RSTS)); + pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET; + } + else if(bcm2708_reboot_mode == 'p') + { + // NOOBS < 1.3 halting + pm_rsts = readl(__io_address(PM_RSTS)); + pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET; + } + else + { + pm_rsts = calc_rsts(reboot_part); + } + + writel(pm_rsts, __io_address(PM_RSTS)); + + /* Setup watchdog for reset */ + pm_rstc = readl(__io_address(PM_RSTC)); + + pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) + pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; + + writel(pm_wdog, __io_address(PM_WDOG)); + writel(pm_rstc, __io_address(PM_RSTC)); +} + +/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */ +static void bcm2709_power_off(void) +{ + extern char bcm2708_reboot_mode; + if(bcm2708_reboot_mode == 'q') + { + // NOOBS < v1.3 + bcm2709_restart('p', ""); + } + else + { + /* partition 63 is special code for HALT the bootloader knows not to boot*/ + reboot_part = 63; + /* continue with normal reset mechanism */ + bcm2709_restart(0, ""); + } +} + +static void __init bcm2709_init_uart1(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart"); + if (of_device_is_available(np)) { + pr_info("bcm2709: Mini UART enabled\n"); + writel(1, __io_address(UART1_BASE + 0x4)); + } +} + +void __init bcm2709_init(void) +{ + int ret; + + vc_cma_early_init(); + + pm_power_off = bcm2709_power_off; + + ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, + NULL); + if (ret) { + pr_err("of_platform_populate failed: %d\n", ret); + BUG(); + } + + bcm2709_init_uart1(); + + system_rev = boardrev; + system_serial_low = serial; +} + +static void __init bcm2709_timer_init(void) +{ + // timer control + writel(0, __io_address(ARM_LOCAL_CONTROL)); + // timer pre_scaler + writel(0x80000000, __io_address(ARM_LOCAL_PRESCALER)); // 19.2MHz + //writel(0x06AAAAAB, __io_address(ARM_LOCAL_PRESCALER)); // 1MHz + + of_clk_init(NULL); + clocksource_probe(); +} + + +void __init bcm2709_init_early(void) +{ + /* + * Some devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_4M); +} + +static void __init board_reserve(void) +{ + vc_cma_reserve(); +} + + +#ifdef CONFIG_SMP +#include + +#include +#include +int dc4=0; +//void dc4_log(unsigned x) { if (dc4) writel((x), __io_address(ST_BASE+10 + raw_smp_processor_id()*4)); } +void dc4_log_dead(unsigned x) { if (dc4) writel((readl(__io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)) & 0xffff) | ((x)<<16), __io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)); } + +static void bcm2835_send_doorbell(const struct cpumask *mask, unsigned int irq) +{ + int cpu; + /* + * Ensure that stores to Normal memory are visible to the + * other CPUs before issuing the IPI. + */ + dsb(); + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + { + /* submit softirq */ + writel(1<%x)\n", __FUNCTION__, (unsigned)virt_to_phys((void *)secondary_startup), (unsigned)__io_address(ST_BASE + 0x10)); + printk("[%s] ncores=%d\n", __FUNCTION__, ncores); + + for (i = 0; i < ncores; i++) { + set_cpu_possible(i, true); + /* enable IRQ (not FIQ) */ + writel(0x1, __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 0x4 * i)); + //writel(0xf, __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 0x4 * i)); + } + set_smp_cross_call(bcm2835_send_doorbell); +} + +/* + * for arch/arm/kernel/smp.c:smp_prepare_cpus(unsigned int max_cpus) + */ +void __init bcm2709_smp_prepare_cpus(unsigned int max_cpus) +{ + //void __iomem *scu_base; + + printk("[%s] enter\n", __FUNCTION__); + //scu_base = scu_base_addr(); + //scu_enable(scu_base); +} + +/* + * for linux/arch/arm/kernel/smp.c:secondary_start_kernel(void) + */ +void __init bcm2709_secondary_init(unsigned int cpu) +{ + printk("[%s] enter cpu:%d\n", __FUNCTION__, cpu); + //gic_secondary_init(0); +} + +/* + * for linux/arch/arm/kernel/smp.c:__cpu_up(..) + */ +int __init bcm2709_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void secondary_startup(void); + void *mbox_set = __io_address(ARM_LOCAL_MAILBOX3_SET0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0)); + void *mbox_clr = __io_address(ARM_LOCAL_MAILBOX3_CLR0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0)); + unsigned secondary_boot = (unsigned)virt_to_phys((void *)secondary_startup); + int timeout=20; + unsigned t = -1; + //printk("[%s] enter cpu:%d (%x->%p) %x\n", __FUNCTION__, cpu, secondary_boot, wake, readl(wake)); + + dsb(); + BUG_ON(readl(mbox_clr) != 0); + writel(secondary_boot, mbox_set); + + while (--timeout > 0) { + t = readl(mbox_clr); + if (t == 0) break; + cpu_relax(); + } + if (timeout==0) + printk("[%s] cpu:%d failed to start (%x)\n", __FUNCTION__, cpu, t); + else + printk("[%s] cpu:%d started (%x) %d\n", __FUNCTION__, cpu, t, timeout); + + return 0; +} + + +struct smp_operations bcm2709_smp_ops __initdata = { + .smp_init_cpus = bcm2709_smp_init_cpus, + .smp_prepare_cpus = bcm2709_smp_prepare_cpus, + .smp_secondary_init = bcm2709_secondary_init, + .smp_boot_secondary = bcm2709_boot_secondary, +}; +#endif + +static const char * const bcm2709_compat[] = { + "brcm,bcm2709", + "brcm,bcm2708", /* Could use bcm2708 in a pinch */ + NULL +}; + +MACHINE_START(BCM2709, "BCM2709") + /* Maintainer: Broadcom Europe Ltd. */ +#ifdef CONFIG_SMP + .smp = smp_ops(bcm2709_smp_ops), +#endif + .map_io = bcm2709_map_io, + .init_time = bcm2709_timer_init, + .init_machine = bcm2709_init, + .init_early = bcm2709_init_early, + .reserve = board_reserve, + .restart = bcm2709_restart, + .dt_compat = bcm2709_compat, +MACHINE_END + +MACHINE_START(BCM2708, "BCM2709") + /* Maintainer: Broadcom Europe Ltd. */ +#ifdef CONFIG_SMP + .smp = smp_ops(bcm2709_smp_ops), +#endif + .map_io = bcm2709_map_io, + .init_time = bcm2709_timer_init, + .init_machine = bcm2709_init, + .init_early = bcm2709_init_early, + .reserve = board_reserve, + .restart = bcm2709_restart, + .dt_compat = bcm2709_compat, +MACHINE_END + +module_param(boardrev, uint, 0644); +module_param(serial, uint, 0644); +module_param(reboot_part, uint, 0644); --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* arch/arm/mach-bcm2708/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include + + .macro addruart, rp, rv, tmp + ldr \rp, =UART0_BASE + ldr \rv, =IO_ADDRESS(UART0_BASE) + .endm + +#include --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/entry-macro.S @@ -0,0 +1,123 @@ +/* + * arch/arm/mach-bcm2708/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for BCM2708 platforms + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + /* get core number */ + mrc p15, 0, \tmp, c0, c0, 5 + ubfx \tmp, \tmp, #0, #2 + + /* get core's local interrupt controller */ + ldr \irqstat, = __io_address(ARM_LOCAL_IRQ_PENDING0) @ local interrupt source + add \irqstat, \irqstat, \tmp, lsl #2 + ldr \tmp, [\irqstat] + /* ignore gpu interrupt */ + bic \tmp, #0x100 + /* ignore mailbox interrupts */ + bics \tmp, #0xf0 + beq 1005f + + @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) + @ N.B. CLZ is an ARM5 instruction. + mov \irqnr, #(ARM_IRQ_LOCAL_BASE + 31) + sub \irqstat, \tmp, #1 + eor \irqstat, \irqstat, \tmp + clz \tmp, \irqstat + sub \irqnr, \tmp + b 1020f +1005: + /* get core number */ + mrc p15, 0, \tmp, c0, c0, 5 + ubfx \tmp, \tmp, #0, #2 + + cmp \tmp, #1 + beq 1020f + cmp \tmp, #2 + beq 1020f + cmp \tmp, #3 + beq 1020f + + /* get masked status */ + ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)] + mov \irqnr, #(ARM_IRQ0_BASE + 31) + and \tmp, \irqstat, #0x300 @ save bits 8 and 9 + /* clear bits 8 and 9, and test */ + bics \irqstat, \irqstat, #0x300 + bne 1010f + + tst \tmp, #0x100 + ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)] + movne \irqnr, #(ARM_IRQ1_BASE + 31) + @ Mask out the interrupts also present in PEND0 - see SW-5809 + bicne \irqstat, #((1<<7) | (1<<9) | (1<<10)) + bicne \irqstat, #((1<<18) | (1<<19)) + bne 1010f + + tst \tmp, #0x200 + ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)] + movne \irqnr, #(ARM_IRQ2_BASE + 31) + @ Mask out the interrupts also present in PEND0 - see SW-5809 + bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25)) + bicne \irqstat, #((1<<30)) + beq 1020f + +1010: + @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) + @ N.B. CLZ is an ARM5 instruction. + sub \tmp, \irqstat, #1 + eor \irqstat, \irqstat, \tmp + clz \tmp, \irqstat + sub \irqnr, \tmp + +1020: @ EQ will be set if no irqs pending + + .endm + + .macro test_for_ipi, irqnr, irqstat, base, tmp + /* get core number */ + mrc p15, 0, \tmp, c0, c0, 5 + ubfx \tmp, \tmp, #0, #2 + /* get core's mailbox interrupt control */ + ldr \irqstat, = __io_address(ARM_LOCAL_MAILBOX0_CLR0) @ mbox_clr + add \irqstat, \irqstat, \tmp, lsl #4 + ldr \tmp, [\irqstat] + cmp \tmp, #0 + beq 1030f + clz \tmp, \tmp + rsb \irqnr, \tmp, #31 + mov \tmp, #1 + lsl \tmp, \irqnr + str \tmp, [\irqstat] @ clear interrupt source + dsb +1030: @ EQ will be set if no irqs pending + .endm --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-bcm2708/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/memory.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-bcm2708/include/mach/memory.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* Memory overview: + + [ARMcore] <--virtual addr--> + [ARMmmu] <--physical addr--> + [GERTmap] <--bus add--> + [VCperiph] + +*/ + +/* + * Physical DRAM offset. + */ +#define BCM_PLAT_PHYS_OFFSET UL(0x00000000) +#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ + +#ifdef CONFIG_BCM2708_NOL2CACHE + #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ +#else + #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ +#endif + +/* We're using the memory at 64M in the VideoCore for Linux - this adjustment + * will provide the offset into this area as well as setting the bits that + * stop the L1 and L2 cache from being used + * + * WARNING: this only works because the ARM is given memory at a fixed location + * (ARMMEM_OFFSET) + */ +#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) +#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) +#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) +#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) +#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/platform.h @@ -0,0 +1,188 @@ +/* + * arch/arm/mach-bcm2708/include/mach/platform.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _BCM2708_PLATFORM_H +#define _BCM2708_PLATFORM_H + + +/* macros to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x00ffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) + +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + + +/* + * SDRAM + */ +#define BCM2708_SDRAM_BASE 0x00000000 + +/* + * Logic expansion modules + * + */ + + +/* ------------------------------------------------------------------------ + * BCM2708 ARMCTRL Registers + * ------------------------------------------------------------------------ + */ + +#define HW_REGISTER_RW(addr) (addr) +#define HW_REGISTER_RO(addr) (addr) + +/* + * Definitions and addresses for the ARM CONTROL logic + * This file is manually generated. + */ + +#define BCM2708_PERI_BASE 0x3F000000 +#define IC0_BASE (BCM2708_PERI_BASE + 0x2000) +#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ +#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */ +#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ +#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ +#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ +#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */ +#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */ +#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ +#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ +#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ +#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */ +#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ +#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ +#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ +#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ +#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ +#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ +#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ +#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ + +#define ARMCTRL_BASE (ARM_BASE + 0x000) +#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ +#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ +#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ + +/* + * Watchdog + */ +#define PM_RSTC (PM_BASE+0x1c) +#define PM_RSTS (PM_BASE+0x20) +#define PM_WDOG (PM_BASE+0x24) + +#define PM_WDOG_RESET 0000000000 +#define PM_PASSWORD 0x5a000000 +#define PM_WDOG_TIME_SET 0x000fffff +#define PM_RSTC_WRCFG_CLR 0xffffffcf +#define PM_RSTC_WRCFG_SET 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 +#define PM_RSTC_RESET 0x00000102 + +#define PM_RSTS_HADPOR_SET 0x00001000 +#define PM_RSTS_HADSRH_SET 0x00000400 +#define PM_RSTS_HADSRF_SET 0x00000200 +#define PM_RSTS_HADSRQ_SET 0x00000100 +#define PM_RSTS_HADWRH_SET 0x00000040 +#define PM_RSTS_HADWRF_SET 0x00000020 +#define PM_RSTS_HADWRQ_SET 0x00000010 +#define PM_RSTS_HADDRH_SET 0x00000004 +#define PM_RSTS_HADDRF_SET 0x00000002 +#define PM_RSTS_HADDRQ_SET 0x00000001 + +#define UART0_CLOCK 3000000 + +#define ARM_LOCAL_BASE 0x40000000 +#define ARM_LOCAL_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x000) + +#define ARM_LOCAL_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x000) +#define ARM_LOCAL_PRESCALER HW_REGISTER_RW(ARM_LOCAL_BASE+0x008) +#define ARM_LOCAL_GPU_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x00C) +#define ARM_LOCAL_PM_ROUTING_SET HW_REGISTER_RW(ARM_LOCAL_BASE+0x010) +#define ARM_LOCAL_PM_ROUTING_CLR HW_REGISTER_RW(ARM_LOCAL_BASE+0x014) +#define ARM_LOCAL_TIMER_LS HW_REGISTER_RW(ARM_LOCAL_BASE+0x01C) +#define ARM_LOCAL_TIMER_MS HW_REGISTER_RW(ARM_LOCAL_BASE+0x020) +#define ARM_LOCAL_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x024) +#define ARM_LOCAL_AXI_COUNT HW_REGISTER_RW(ARM_LOCAL_BASE+0x02C) +#define ARM_LOCAL_AXI_IRQ HW_REGISTER_RW(ARM_LOCAL_BASE+0x030) +#define ARM_LOCAL_TIMER_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x034) +#define ARM_LOCAL_TIMER_WRITE HW_REGISTER_RW(ARM_LOCAL_BASE+0x038) + +#define ARM_LOCAL_TIMER_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x040) +#define ARM_LOCAL_TIMER_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x044) +#define ARM_LOCAL_TIMER_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x048) +#define ARM_LOCAL_TIMER_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x04C) + +#define ARM_LOCAL_MAILBOX_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x050) +#define ARM_LOCAL_MAILBOX_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x054) +#define ARM_LOCAL_MAILBOX_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x058) +#define ARM_LOCAL_MAILBOX_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x05C) + +#define ARM_LOCAL_IRQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x060) +#define ARM_LOCAL_IRQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x064) +#define ARM_LOCAL_IRQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x068) +#define ARM_LOCAL_IRQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x06C) + +#define ARM_LOCAL_FIQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x070) +#define ARM_LOCAL_FIQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x074) +#define ARM_LOCAL_FIQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x078) +#define ARM_LOCAL_FIQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x07C) + +#define ARM_LOCAL_MAILBOX0_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x080) +#define ARM_LOCAL_MAILBOX1_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x084) +#define ARM_LOCAL_MAILBOX2_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x088) +#define ARM_LOCAL_MAILBOX3_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x08C) + +#define ARM_LOCAL_MAILBOX0_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x090) +#define ARM_LOCAL_MAILBOX1_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x094) +#define ARM_LOCAL_MAILBOX2_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x098) +#define ARM_LOCAL_MAILBOX3_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x09C) + +#define ARM_LOCAL_MAILBOX0_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A0) +#define ARM_LOCAL_MAILBOX1_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A4) +#define ARM_LOCAL_MAILBOX2_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A8) +#define ARM_LOCAL_MAILBOX3_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0AC) + +#define ARM_LOCAL_MAILBOX0_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B0) +#define ARM_LOCAL_MAILBOX1_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B4) +#define ARM_LOCAL_MAILBOX2_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B8) +#define ARM_LOCAL_MAILBOX3_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0BC) + +#define ARM_LOCAL_MAILBOX0_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C0) +#define ARM_LOCAL_MAILBOX1_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C4) +#define ARM_LOCAL_MAILBOX2_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C8) +#define ARM_LOCAL_MAILBOX3_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0CC) + +#define ARM_LOCAL_MAILBOX0_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D0) +#define ARM_LOCAL_MAILBOX1_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D4) +#define ARM_LOCAL_MAILBOX2_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D8) +#define ARM_LOCAL_MAILBOX3_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0DC) + +#define ARM_LOCAL_MAILBOX0_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E0) +#define ARM_LOCAL_MAILBOX1_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E4) +#define ARM_LOCAL_MAILBOX2_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E8) +#define ARM_LOCAL_MAILBOX3_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0EC) + +#define ARM_LOCAL_MAILBOX0_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F0) +#define ARM_LOCAL_MAILBOX1_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F4) +#define ARM_LOCAL_MAILBOX2_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F8) +#define ARM_LOCAL_MAILBOX3_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0FC) + +#endif + +/* END */ --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-bcm2708/include/mach/system.h + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/uncompress.h @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-bcn2708/include/mach/uncompress.h + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#define UART_BAUD 115200 + +#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR) +#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR) +#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD) +#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD) +#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH) +#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) + barrier(); + + __raw_writel(c, BCM2708_UART_DR); +} + +static inline void flush(void) +{ + int fr; + + do { + fr = __raw_readl(BCM2708_UART_FR); + barrier(); + } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); +} + +static inline void arch_decomp_setup(void) +{ + int temp, div, rem, frac; + + temp = 16 * UART_BAUD; + div = UART0_CLOCK / temp; + rem = UART0_CLOCK % temp; + temp = (8 * rem) / UART_BAUD; + frac = (temp >> 1) + (temp & 1); + + /* Make sure the UART is disabled before we start */ + __raw_writel(0, BCM2708_UART_CR); + + /* Set the baud rate */ + __raw_writel(div, BCM2708_UART_IBRD); + __raw_writel(frac, BCM2708_UART_FBRD); + + /* Set the UART to 8n1, FIFO enabled */ + __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); + + /* Enable the UART */ + __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, + BCM2708_UART_CR); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/vc_mem.h @@ -0,0 +1,35 @@ +/***************************************************************************** +* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#if !defined( VC_MEM_H ) +#define VC_MEM_H + +#include + +#define VC_MEM_IOC_MAGIC 'v' + +#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) +#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) +#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) +#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) + +#if defined( __KERNEL__ ) +#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF + +extern unsigned long mm_vc_mem_phys_addr; +extern unsigned int mm_vc_mem_size; +extern int vc_mem_get_current_size( void ); +#endif + +#endif /* VC_MEM_H */ --- /dev/null +++ b/arch/arm/mach-bcm2709/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-bcm2708/include/mach/vmalloc.h + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (0xff000000) --- /dev/null +++ b/arch/arm/mach-bcm2709/vc_mem.c @@ -0,0 +1,431 @@ +/***************************************************************************** +* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_ARCH_KONA +#include +#elif defined(CONFIG_ARCH_BCM2708) || defined(CONFIG_ARCH_BCM2709) +#else +#include +#endif + +#include "mach/vc_mem.h" + +#define DRIVER_NAME "vc-mem" + +// Device (/dev) related variables +static dev_t vc_mem_devnum = 0; +static struct class *vc_mem_class = NULL; +static struct cdev vc_mem_cdev; +static int vc_mem_inited = 0; + +#ifdef CONFIG_DEBUG_FS +static struct dentry *vc_mem_debugfs_entry; +#endif + +/* + * Videocore memory addresses and size + * + * Drivers that wish to know the videocore memory addresses and sizes should + * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in + * headers. This allows the other drivers to not be tied down to a a certain + * address/size at compile time. + * + * In the future, the goal is to have the videocore memory virtual address and + * size be calculated at boot time rather than at compile time. The decision of + * where the videocore memory resides and its size would be in the hands of the + * bootloader (and/or kernel). When that happens, the values of these variables + * would be calculated and assigned in the init function. + */ +// in the 2835 VC in mapped above ARM, but ARM has full access to VC space +unsigned long mm_vc_mem_phys_addr = 0x00000000; +unsigned int mm_vc_mem_size = 0; +unsigned int mm_vc_mem_base = 0; + +EXPORT_SYMBOL(mm_vc_mem_phys_addr); +EXPORT_SYMBOL(mm_vc_mem_size); +EXPORT_SYMBOL(mm_vc_mem_base); + +static uint phys_addr = 0; +static uint mem_size = 0; +static uint mem_base = 0; + + +/**************************************************************************** +* +* vc_mem_open +* +***************************************************************************/ + +static int +vc_mem_open(struct inode *inode, struct file *file) +{ + (void) inode; + (void) file; + + pr_debug("%s: called file = 0x%p\n", __func__, file); + + return 0; +} + +/**************************************************************************** +* +* vc_mem_release +* +***************************************************************************/ + +static int +vc_mem_release(struct inode *inode, struct file *file) +{ + (void) inode; + (void) file; + + pr_debug("%s: called file = 0x%p\n", __func__, file); + + return 0; +} + +/**************************************************************************** +* +* vc_mem_get_size +* +***************************************************************************/ + +static void +vc_mem_get_size(void) +{ +} + +/**************************************************************************** +* +* vc_mem_get_base +* +***************************************************************************/ + +static void +vc_mem_get_base(void) +{ +} + +/**************************************************************************** +* +* vc_mem_get_current_size +* +***************************************************************************/ + +int +vc_mem_get_current_size(void) +{ + return mm_vc_mem_size; +} + +EXPORT_SYMBOL_GPL(vc_mem_get_current_size); + +/**************************************************************************** +* +* vc_mem_ioctl +* +***************************************************************************/ + +static long +vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int rc = 0; + + (void) cmd; + (void) arg; + + pr_debug("%s: called file = 0x%p\n", __func__, file); + + switch (cmd) { + case VC_MEM_IOC_MEM_PHYS_ADDR: + { + pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", + __func__, (void *) mm_vc_mem_phys_addr); + + if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, + sizeof (mm_vc_mem_phys_addr)) != 0) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_SIZE: + { + // Get the videocore memory size first + vc_mem_get_size(); + + pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, + mm_vc_mem_size); + + if (copy_to_user((void *) arg, &mm_vc_mem_size, + sizeof (mm_vc_mem_size)) != 0) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_BASE: + { + // Get the videocore memory base + vc_mem_get_base(); + + pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, + mm_vc_mem_base); + + if (copy_to_user((void *) arg, &mm_vc_mem_base, + sizeof (mm_vc_mem_base)) != 0) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_LOAD: + { + // Get the videocore memory base + vc_mem_get_base(); + + pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, + mm_vc_mem_base); + + if (copy_to_user((void *) arg, &mm_vc_mem_base, + sizeof (mm_vc_mem_base)) != 0) { + rc = -EFAULT; + } + break; + } + default: + { + return -ENOTTY; + } + } + pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc); + + return rc; +} + +/**************************************************************************** +* +* vc_mem_mmap +* +***************************************************************************/ + +static int +vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) +{ + int rc = 0; + unsigned long length = vma->vm_end - vma->vm_start; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + + pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", + __func__, (long) vma->vm_start, (long) vma->vm_end, + (long) vma->vm_pgoff); + + if (offset + length > mm_vc_mem_size) { + pr_err("%s: length %ld is too big\n", __func__, length); + return -EINVAL; + } + // Do not cache the memory map + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + rc = remap_pfn_range(vma, vma->vm_start, + (mm_vc_mem_phys_addr >> PAGE_SHIFT) + + vma->vm_pgoff, length, vma->vm_page_prot); + if (rc != 0) { + pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); + } + + return rc; +} + +/**************************************************************************** +* +* File Operations for the driver. +* +***************************************************************************/ + +static const struct file_operations vc_mem_fops = { + .owner = THIS_MODULE, + .open = vc_mem_open, + .release = vc_mem_release, + .unlocked_ioctl = vc_mem_ioctl, + .mmap = vc_mem_mmap, +}; + +#ifdef CONFIG_DEBUG_FS +static void vc_mem_debugfs_deinit(void) +{ + debugfs_remove_recursive(vc_mem_debugfs_entry); + vc_mem_debugfs_entry = NULL; +} + + +static int vc_mem_debugfs_init( + struct device *dev) +{ + vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL); + if (!vc_mem_debugfs_entry) { + dev_warn(dev, "could not create debugfs entry\n"); + return -EFAULT; + } + + if (!debugfs_create_x32("vc_mem_phys_addr", + 0444, + vc_mem_debugfs_entry, + (u32 *)&mm_vc_mem_phys_addr)) { + dev_warn(dev, "%s:could not create vc_mem_phys entry\n", + __func__); + goto fail; + } + + if (!debugfs_create_x32("vc_mem_size", + 0444, + vc_mem_debugfs_entry, + (u32 *)&mm_vc_mem_size)) { + dev_warn(dev, "%s:could not create vc_mem_size entry\n", + __func__); + goto fail; + } + + if (!debugfs_create_x32("vc_mem_base", + 0444, + vc_mem_debugfs_entry, + (u32 *)&mm_vc_mem_base)) { + dev_warn(dev, "%s:could not create vc_mem_base entry\n", + __func__); + goto fail; + } + + return 0; + +fail: + vc_mem_debugfs_deinit(); + return -EFAULT; +} + +#endif /* CONFIG_DEBUG_FS */ + + +/**************************************************************************** +* +* vc_mem_init +* +***************************************************************************/ + +static int __init +vc_mem_init(void) +{ + int rc = -EFAULT; + struct device *dev; + + pr_debug("%s: called\n", __func__); + + mm_vc_mem_phys_addr = phys_addr; + mm_vc_mem_size = mem_size; + mm_vc_mem_base = mem_base; + + vc_mem_get_size(); + + pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", + mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); + + if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { + pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", + __func__, rc); + goto out_err; + } + + cdev_init(&vc_mem_cdev, &vc_mem_fops); + if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { + pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); + goto out_unregister; + } + + vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); + if (IS_ERR(vc_mem_class)) { + rc = PTR_ERR(vc_mem_class); + pr_err("%s: class_create failed (rc=%d)\n", __func__, rc); + goto out_cdev_del; + } + + dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, + DRIVER_NAME); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + pr_err("%s: device_create failed (rc=%d)\n", __func__, rc); + goto out_class_destroy; + } + +#ifdef CONFIG_DEBUG_FS + /* don't fail if the debug entries cannot be created */ + vc_mem_debugfs_init(dev); +#endif + + vc_mem_inited = 1; + return 0; + + device_destroy(vc_mem_class, vc_mem_devnum); + + out_class_destroy: + class_destroy(vc_mem_class); + vc_mem_class = NULL; + + out_cdev_del: + cdev_del(&vc_mem_cdev); + + out_unregister: + unregister_chrdev_region(vc_mem_devnum, 1); + + out_err: + return -1; +} + +/**************************************************************************** +* +* vc_mem_exit +* +***************************************************************************/ + +static void __exit +vc_mem_exit(void) +{ + pr_debug("%s: called\n", __func__); + + if (vc_mem_inited) { +#if CONFIG_DEBUG_FS + vc_mem_debugfs_deinit(); +#endif + device_destroy(vc_mem_class, vc_mem_devnum); + class_destroy(vc_mem_class); + cdev_del(&vc_mem_cdev); + unregister_chrdev_region(vc_mem_devnum, 1); + } +} + +module_init(vc_mem_init); +module_exit(vc_mem_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Broadcom Corporation"); + +module_param(phys_addr, uint, 0644); +module_param(mem_size, uint, 0644); +module_param(mem_base, uint, 0644); --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -358,7 +358,7 @@ config CPU_PJ4B # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708) select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) * * IRQs are already disabled. */ + +/* See jira SW-5991 for details of this workaround */ ENTRY(cpu_v6_do_idle) - mov r1, #0 - mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode - mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt + .align 5 + mov r1, #2 +1: subs r1, #1 + nop + mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode + mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt + nop + nop + nop + bne 1b ret lr ENTRY(cpu_v6_dcache_clean_area) --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -480,6 +480,7 @@ __errata_finish: orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions ret lr @ return to head.S:__ret + .space 256 ENDPROC(__v7_setup) .align 2 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -522,6 +522,8 @@ torbreck MACH_TORBRECK TORBRECK 3090 prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 +bcm2708 MACH_BCM2708 BCM2708 3138 +bcm2709 MACH_BCM2709 BCM2709 3139 ag5evm MACH_AG5EVM AG5EVM 3189 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += noma obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ORION_TIMER) += time-orion.o -obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708) += bcm2835_timer.o obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o obj-$(CONFIG_ARCH_ATLAS7) += timer-atlas7.o obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,9 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o +obj-$(CONFIG_ARCH_BCM2708) += irq-bcm2835.o +obj-$(CONFIG_ARCH_BCM2709) += irq-bcm2835.o +obj-$(CONFIG_ARCH_BCM2709) += irq-bcm2836.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o obj-$(CONFIG_ARCH_HIP04) += irq-hip04.o obj-$(CONFIG_ARCH_MMP) += irq-mmp.o --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -289,6 +289,7 @@ struct mmc_host { #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ +#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */ mmc_pm_flag_t pm_caps; /* supported pm features */