From 2648818dcb79c89305cf68b5f53a521b9065c341 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Sun, 24 Apr 2016 17:28:15 +0100 Subject: [PATCH] drm/vc4: Add DT parameters to control CMA usage Example: dtoverlay=vc4-kms-v3d,cma-128 See: https://github.com/raspberrypi/linux/pull/1431 Signed-off-by: Phil Elwell --- arch/arm/boot/dts/overlays/README | 8 +++-- arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 36 ++++++++++++++++++++++ 2 files changed, 42 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -1023,8 +1023,12 @@ Name: vc4-kms-v3d Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or booting to GUI while this overlay is in use will cause interesting lockups. -Load: dtoverlay=vc4-kms-v3d -Params: +Load: dtoverlay=vc4-kms-v3d, +Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) + cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) + cma-128 CMA is 128MB, 128MB-aligned + cma-96 CMA is 96MB, 128MB-aligned + cma-64 CMA is 64MB, 64MB-aligned Name: vga666 --- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts @@ -94,4 +94,40 @@ bootargs = "cma=256M@256M"; }; }; + + fragment@5 { + target-path = "/chosen"; + __dormant__ { + bootargs = "cma=192M@256M"; + }; + }; + + fragment@6 { + target-path = "/chosen"; + __dormant__ { + bootargs = "cma=128M@128M"; + }; + }; + + fragment@7 { + target-path = "/chosen"; + __dormant__ { + bootargs = "cma=96M@128M"; + }; + }; + + fragment@8 { + target-path = "/chosen"; + __dormant__ { + bootargs = "cma=64M@64M"; + }; + }; + + __overrides__ { + cma-256 = <0>,"+4-5-6-7-8"; + cma-192 = <0>,"-4+5-6-7-8"; + cma-128 = <0>,"-4-5+6-7-8"; + cma-96 = <0>,"-4-5-6+7-8"; + cma-64 = <0>,"-4-5-6-7+8"; + }; };