From 9be336132025e7670790cdc9c24a81c23e893484 Mon Sep 17 00:00:00 2001
From: Alison Wang <b18965@freescale.com>
Date: Thu, 4 Aug 2011 09:59:40 +0800
Subject: [PATCH 06/52] Add FEC driver support for MCF5445x/MCF5441x/MCF547x/MCF548x

Add FEC driver support for MCF5445x/MCF5441x/MCF547x/MCF548x.

Signed-off-by: Alison Wang <b18965@freescale.com>
---
 arch/m68k/coldfire/m5441x/fec.c |  172 +++++
 arch/m68k/coldfire/m5445x/fec.c |  143 ++++
 drivers/net/Kconfig             |   33 +-
 drivers/net/Makefile            |    1 +
 drivers/net/fec.c               |   27 +-
 drivers/net/fec.h               |    7 +-
 drivers/net/fec_m547x.c         | 1551 +++++++++++++++++++++++++++++++++++++++
 drivers/net/fec_m547x.h         |  241 ++++++
 drivers/net/phy/Kconfig         |   15 +
 drivers/net/phy/Makefile        |    3 +
 drivers/net/phy/broadcom522x.c  |  170 +++++
 drivers/net/phy/national836x.c  |  104 +++
 drivers/net/phy/national8384x.c |  110 +++
 13 files changed, 2566 insertions(+), 11 deletions(-)
 create mode 100644 arch/m68k/coldfire/m5441x/fec.c
 create mode 100644 arch/m68k/coldfire/m5445x/fec.c
 create mode 100644 drivers/net/fec_m547x.c
 create mode 100644 drivers/net/fec_m547x.h
 create mode 100644 drivers/net/phy/broadcom522x.c
 create mode 100644 drivers/net/phy/national836x.c
 create mode 100644 drivers/net/phy/national8384x.c

--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/fec.c
@@ -0,0 +1,172 @@
+/*
+ * fec.c on m5441x platform
+ *
+ * Sub-architcture dependant initialization code for the Freescale
+ * 5441X FEC module.
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * ShrekWu B16972@freescale.com
+ * Alison Wang b18965@freescale.com
+ *
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/fec.h>
+#include <linux/io.h>
+
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcf5441x_dtim.h>
+
+static struct resource fec0_resources[] = {
+	[0] = {
+		.start  = MCF_MBAR + 0xfc0d4000,
+		.end    = MCF_MBAR + 0xfc0d42ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = (64 + 36),
+		.end    = (64 + 36),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = (64 + 40),
+		.end    = (64 + 40),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start  = (64 + 42),
+		.end    = (64 + 42),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+#if defined(CONFIG_FEC2)
+static struct resource fec1_resources[] = {
+	[0] = {
+		.start  = MCF_MBAR + 0xfc0d8000,
+		.end    = MCF_MBAR + 0xfc0d82ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = (64 + 13 + 36),
+		.end    = (64 + 13 + 36),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = (64 + 13 + 40),
+		.end    = (64 + 13 + 40),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start  = (64 + 13 + 42),
+		.end    = (64 + 13 + 42),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+static struct fec_platform_data m54418_fec_pdata = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct platform_device fec0_coldfire_device = {
+	.name = "m54418-fec",
+	.id = 0,
+	.resource = fec0_resources,
+	.num_resources = ARRAY_SIZE(fec0_resources),
+	.dev = {
+		.platform_data = &m54418_fec_pdata,
+	}
+};
+
+#if defined(CONFIG_FEC2)
+static struct platform_device fec1_coldfire_device = {
+	.name = "m54418-fec",
+	.id = 1,
+	.resource = fec1_resources,
+	.num_resources = ARRAY_SIZE(fec1_resources),
+	.dev = {
+		.platform_data = &m54418_fec_pdata,
+	}
+};
+#endif
+
+static struct platform_device *fec_device[] = {
+	&fec0_coldfire_device,
+#if defined(CONFIG_FEC2)
+	&fec1_coldfire_device,
+#endif
+};
+
+static int __init mcf5441x_fec_dev_init(void)
+{
+	int retval = 0;
+
+	MCF_GPIO_PAR_FEC =
+		(MCF_GPIO_PAR_FEC &
+		MCF_GPIO_PAR_FEC_FEC_MASK) |
+		MCF_GPIO_PAR_FEC_FEC_RMII0FUL_ULPI;
+
+	MCF_GPIO_SRCR_FEC = 0x0C;
+
+#if defined(CONFIG_FEC2)
+	MCF_GPIO_PAR_FEC =
+		(MCF_GPIO_PAR_FEC &
+		MCF_GPIO_PAR_FEC_FEC_MASK) |
+		MCF_GPIO_PAR_FEC_FEC_RMII0FUL_1FUL;
+
+	MCF_GPIO_SRCR_FEC |= 0x03;
+
+	MCF_GPIO_PAR_SIMP0H =
+		(MCF_GPIO_PAR_SIMP0H &
+		MCF_GPIO_PAR_SIMP0H_DAT_MASK) |
+		MCF_GPIO_PAR_SIMP0H_DAT_GPIO;
+
+	MCF_GPIO_PDDR_G =
+		(MCF_GPIO_PDDR_G &
+		MCF_GPIO_PDDR_G4_MASK) |
+		MCF_GPIO_PDDR_G4_OUTPUT;
+
+	MCF_GPIO_PODR_G =
+		(MCF_GPIO_PODR_G &
+		MCF_GPIO_PODR_G4_MASK);
+#endif
+
+	retval = platform_add_devices(fec_device, ARRAY_SIZE(fec_device));
+	if (retval < 0) {
+		printk(KERN_ERR "MCF5441x FEC: platform_device_register failed"
+				"with code=%d\n", retval);
+	}
+
+	return retval;
+}
+
+arch_initcall(mcf5441x_fec_dev_init);
--- /dev/null
+++ b/arch/m68k/coldfire/m5445x/fec.c
@@ -0,0 +1,143 @@
+/*
+ * fec-mcf5445x.c
+ *
+ * Sub-architcture dependant initialization code for the Freescale
+ * 5445X FEC module.
+ *
+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Shrek Wu B16972@freescale.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <asm/pgtable.h>
+
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static struct resource fec0_resources[] = {
+	[0] = {
+		.start  = MCF_MBAR + 0xfc030000,
+		.end    = MCF_MBAR + 0xfc0302ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = (64 + 36),
+		.end    = (64 + 36),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = (64 + 40),
+		.end    = (64 + 40),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start  = (64 + 42),
+		.end    = (64 + 42),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+#if defined(CONFIG_FEC2)
+static struct resource fec1_resources[] = {
+	[0] = {
+		.start  = MCF_MBAR + 0xfc034000,
+		.end    = MCF_MBAR + 0xfc0342ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = (64 + 13 + 36),
+		.end    = (64 + 13 + 36),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = (64 + 13 + 40),
+		.end    = (64 + 13 + 40),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start  = (64 + 13 + 42),
+		.end    = (64 + 13 + 42),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+static struct platform_device fec0_coldfire_device = {
+	.name = "fec",
+	.id = 0,
+	.resource = fec0_resources,
+	.num_resources = ARRAY_SIZE(fec0_resources),
+};
+
+#if defined(CONFIG_FEC2)
+static struct platform_device fec1_coldfire_device = {
+	.name = "fec",
+	.id = 1,
+	.resource = fec1_resources,
+	.num_resources = ARRAY_SIZE(fec1_resources),
+};
+#endif
+
+static struct platform_device *fec_device[] = {
+	&fec0_coldfire_device,
+#if defined(CONFIG_FEC2)
+	&fec1_coldfire_device,
+#endif
+};
+
+static int __init mcf5445x_fec_dev_init(void)
+{
+	int retval = 0;
+
+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
+			MCF_GPIO_PAR_FEC_FEC0_MASK) |
+			MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO;
+
+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
+		MCF_GPIO_PAR_FEC_FEC1_MASK) |
+		MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO;
+
+	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 |
+			MCF_GPIO_PAR_FECI2C_MDC0_MDC0);
+
+	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1 |
+			MCF_GPIO_PAR_FECI2C_MDC1_MDC1);
+
+	retval = platform_add_devices(fec_device, ARRAY_SIZE(fec_device));
+	if (retval < 0) {
+		printk(KERN_ERR "MCF5445x FEC: platform_device_register failed"
+				"with code=%d\n",
+			retval);
+	}
+
+	return retval;
+}
+
+arch_initcall(mcf5445x_fec_dev_init);
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1943,13 +1943,44 @@ config 68360_ENET
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || M5445X || M5441X || \
 		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
 	select PHYLIB
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
+
+config FEC2
+	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
+	depends on FEC && (M54455 || M5441X)
+	help
+	  Say Y here if you want to use the second built-in 10/100 Fast
+	  ethernet controller on some Motorola ColdFire processors.
+
+config FEC_548x
+	tristate "MCF547x/MCF548x Fast Ethernet Controller support"
+	depends on M547X_8X
+	help
+	  The MCF547x and MCF548x have a built-in Fast Ethernet Controller.
+	  Saying Y here will include support for this device in the kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called fecm.
+
+config FEC_548x_ENABLE_FEC2
+	bool "Enable the second FEC"
+	depends on FEC_548x
+	help
+	  This enables the second FEC on the 547x/548x. If you want to use
+	  it, say Y.
+
+config FEC_548x_SHARED_PHY
+	bool "Shared PHY interface(on some ColdFire designs)"
+	depends on FEC_548x_ENABLE_FEC2
+	help
+	  Say Y here if both PHYs are controlled via a single channel.
+
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_HP100) += hp100.o
 obj-$(CONFIG_SMC9194) += smc9194.o
 obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_FEC_548x) += fec_m547x.o
 obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
 ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
 	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -18,7 +18,7 @@
  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
  * Copyright (c) 2004-2006 Macq Electronique SA.
  *
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 #include <linux/module.h>
@@ -74,6 +74,9 @@ static struct platform_device_id fec_dev
 	}, {
 		.name = "imx28-fec",
 		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
+	}, {
+		.name = "m54418-fec",
+		.driver_data = FEC_QUIRK_ENET_MAC,
 	},
 	{ }
 };
@@ -148,8 +151,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet
  * account when setting it.
  */
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+	defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+	defined(CONFIG_M5445X) || defined(CONFIG_M5441X) || \
+	defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
 #else
 #define	OPT_FRAME_SIZE	0
@@ -400,7 +404,8 @@ fec_enet_tx(struct net_device *dev)
 		if (bdp == fep->cur_tx && fep->tx_full == 0)
 			break;
 
-		dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+/*		dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, \
+			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);*/
 		bdp->cbd_bufaddr = 0;
 
 		skb = fep->tx_skbuff[fep->skb_dirty];
@@ -527,8 +532,8 @@ fec_enet_rx(struct net_device *dev)
 		dev->stats.rx_bytes += pkt_len;
 		data = (__u8*)__va(bdp->cbd_bufaddr);
 
-	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
-        			DMA_FROM_DEVICE);
+/*	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
+			DMA_FROM_DEVICE);*/
 
 		if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
 			swap_buffer(data, pkt_len);
@@ -552,8 +557,8 @@ fec_enet_rx(struct net_device *dev)
 			netif_rx(skb);
 		}
 
-        	bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
-			DMA_FROM_DEVICE);
+/*		bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
+		DMA_FROM_DEVICE);*/
 rx_processing_done:
 		/* Clear the status flags for this buffer */
 		status &= ~BD_ENET_RX_STATS;
@@ -632,6 +637,8 @@ static void __inline__ fec_get_mac(struc
 static void fec_enet_adjust_link(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	struct phy_device *phy_dev = fep->phy_dev;
 	unsigned long flags;
 
@@ -660,6 +667,10 @@ static void fec_enet_adjust_link(struct
 			fec_restart(dev, phy_dev->duplex);
 		else
 			fec_stop(dev);
+
+		if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
+			writel(2, fep->hwp + FEC_ECNTRL);
+
 		status_change = 1;
 	}
 
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -4,6 +4,7 @@
  *	fec.h  --  Fast Ethernet Controller for Motorola ColdFire SoC
  *		   processors.
  *
+ *      Copyright (C) 2011 Freescale Semiconductor,Inc. All Rights Reserved.
  *	(C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
  *	(C) Copyright 2000-2001, Lineo (www.lineo.com)
  */
@@ -14,8 +15,10 @@
 /****************************************************************************/
 
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+	defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+	defined(CONFIG_M537x) || defined(CONFIG_M5301x) || \
+	defined(CONFIG_M5445X) || defined(CONFIG_M5441X) || \
+	defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 /*
  *	Just figures, Motorola would have to change the offsets for
  *	registers in the same peripheral device on different models
--- /dev/null
+++ b/drivers/net/fec_m547x.c
@@ -0,0 +1,1551 @@
+/*
+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Kurt Mahan, kmahan@freescale.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/bitops.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+#include <asm/dma.h>
+#include <asm/MCD_dma.h>
+#include <asm/m5485sram.h>
+#include <asm/virtconvert.h>
+#include <asm/irq.h>
+
+#include "fec_m547x.h"
+
+#ifdef	CONFIG_FEC_548x_ENABLE_FEC2
+#define	FEC_MAX_PORTS	2
+#define	FEC_2
+#else
+#define	FEC_MAX_PORTS	1
+#undef	FEC_2
+#endif
+
+#define VERSION "0.20"
+MODULE_DESCRIPTION("DMA Fast Ethernet Controller driver ver " VERSION);
+
+/* fec private */
+struct fec_priv {
+	struct net_device *netdev;		/* owning net device */
+	void *fecpriv_txbuf[FEC_TX_BUF_NUMBER];	/* tx buffer ptrs */
+	MCD_bufDescFec *fecpriv_txdesc;		/* tx descriptor ptrs */
+	volatile unsigned int fecpriv_current_tx; /* current tx desc index */
+	volatile unsigned int fecpriv_next_tx;	/* next tx desc index */
+	unsigned int fecpriv_current_rx;	/* current rx desc index */
+	MCD_bufDescFec *fecpriv_rxdesc;		/* rx descriptor ptrs */
+	struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */
+	unsigned int fecpriv_initiator_rx;	/* rx dma initiator */
+	unsigned int fecpriv_initiator_tx;	/* tx dma initiator */
+	int fecpriv_fec_rx_channel;		/* rx dma channel */
+	int fecpriv_fec_tx_channel;		/* tx dma channel */
+	int fecpriv_rx_requestor;		/* rx dma requestor */
+	int fecpriv_tx_requestor;		/* tx dma requestor */
+	void *fecpriv_interrupt_fec_rx_handler;	/* dma rx handler */
+	void *fecpriv_interrupt_fec_tx_handler;	/* dma tx handler */
+	unsigned char *fecpriv_mac_addr;	/* private fec mac addr */
+	struct net_device_stats fecpriv_stat;	/* stats ptr */
+	spinlock_t fecpriv_lock;
+	int fecpriv_rxflag;
+	struct tasklet_struct fecpriv_tasklet_reinit;
+	int index;				/* fec hw number */
+	struct phy_device *phydev;
+	struct mii_bus *mdio_bus;
+	int  duplex;
+	int  link;
+	int  speed;
+};
+
+struct net_device *fec_dev[FEC_MAX_PORTS];
+
+/* FEC functions */
+static int __init fec_init(void);
+/*
+static struct net_device_stats *fec_get_stat(struct net_device *dev);
+static int fec_open(struct net_device *dev);
+static int fec_close(struct net_device *nd);
+static int fec_tx(struct sk_buff *skb, struct net_device *dev);
+static void fec_set_multicast_list(struct net_device *nd);
+static int fec_set_mac_address(struct net_device *dev, void *p);
+static void fec_tx_timeout(struct net_device *dev);
+*/
+static void fec_interrupt_fec_tx_handler(struct net_device *dev);
+static void fec_interrupt_fec_rx_handler(struct net_device *dev);
+static irqreturn_t fec_interrupt_handler(int irq, void *dev_id);
+static void fec_interrupt_fec_tx_handler_fec0(void);
+static void fec_interrupt_fec_rx_handler_fec0(void);
+static void fec_interrupt_fec_reinit(unsigned long data);
+
+/* default fec0 address */
+unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };
+
+#ifdef FEC_2
+/* default fec1 address */
+unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };
+#endif
+
+extern unsigned char uboot_enet0[];
+extern unsigned char uboot_enet1[];
+
+#ifndef MODULE
+int fec_str_to_mac(char *str_mac, unsigned char* addr);
+int __init fec_mac_setup0(char *s);
+#endif
+
+
+#ifdef FEC_2
+void fec_interrupt_fec_tx_handler_fec1(void);
+void fec_interrupt_fec_rx_handler_fec1(void);
+#endif
+
+#ifndef MODULE
+int __init fec_mac_setup1(char *s);
+#endif
+
+module_init(fec_init);
+/* module_exit(fec_cleanup); */
+
+__setup("mac0=", fec_mac_setup0);
+
+#ifdef FEC_2
+__setup("mac1=", fec_mac_setup1);
+#endif
+
+#define mk_mii_read(REG)        (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL)  (0x50020000 | ((REG & 0x1f) << 18) | \
+		(VAL & 0xffff))
+/* ----------------------------------------------------------- */
+static int coldfire_fec_mdio_read(struct mii_bus *bus,
+	int phy_id, int reg)
+{
+	int ret;
+#ifdef CONFIG_FEC_548x_SHARED_PHY
+	unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
+#else
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+#endif
+	int tries = 100;
+
+	/* Clear the MII interrupt bit */
+	FEC_EIR(base_addr) = FEC_EIR_MII;
+
+	/* Write to the MII management frame register */
+	FEC_MMFR(base_addr) = mk_mii_read(reg) | (phy_id << 23);
+
+	/* Wait for the reading */
+	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
+		udelay(10);
+
+		if (!tries) {
+			printk(KERN_ERR "%s timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+		tries--;
+	}
+
+	/* Clear the MII interrupt bit */
+	FEC_EIR(base_addr) = FEC_EIR_MII;
+	ret = FEC_MMFR(base_addr) & 0x0000FFFF;
+	return ret;
+}
+
+static int coldfire_fec_mdio_write(struct mii_bus *bus,
+	int phy_id, int reg, u16 data)
+{
+	int ret;
+#ifdef CONFIG_FEC_548x_SHARED_PHY
+	unsigned long base_addr = (unsigned long)FEC_BASE_ADDR_FEC0;
+#else
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+#endif
+	int tries = 100;
+
+	printk(KERN_ERR "%s base_addr %lx, phy_id %x, reg %x, data %x\n",
+		__func__, base_addr, phy_id, reg, data);
+	/* Clear the MII interrupt bit */
+	FEC_EIR(base_addr) = FEC_EIR_MII;
+
+	/*  Write to the MII management frame register */
+	FEC_MMFR(base_addr) = mk_mii_write(reg, data) | (phy_id << 23);
+
+	/* Wait for the writing */
+	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
+		udelay(10);
+		if (!tries) {
+			printk(KERN_ERR "%s timeout\n", __func__);
+			return -ETIMEDOUT;
+		}
+		tries--;
+	}
+	/* Clear the MII interrupt bit */
+	FEC_EIR(base_addr) = FEC_EIR_MII;
+	ret = FEC_MMFR(base_addr) & 0x0000FFFF;
+
+	return ret;
+}
+
+static void fec_adjust_link(struct net_device *dev)
+{
+	struct fec_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = priv->phydev;
+	int new_state = 0;
+
+	if (phydev->link != PHY_DOWN) {
+		if (phydev->duplex != priv->duplex) {
+			new_state = 1;
+			priv->duplex = phydev->duplex;
+		}
+
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			priv->speed = phydev->speed;
+		}
+
+		if (priv->link == PHY_DOWN) {
+			new_state = 1;
+			priv->link = phydev->link;
+		}
+	} else if (priv->link) {
+		new_state = 1;
+		priv->link = PHY_DOWN;
+		priv->speed = 0;
+		priv->duplex = -1;
+	}
+
+	if (new_state)
+		phy_print_status(phydev);
+}
+
+static int coldfire_fec_init_phy(struct net_device *dev)
+{
+	struct fec_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int i;
+	int startnode;
+
+#ifdef CONFIG_FEC_548x_SHARED_PHY
+	if (priv->index == 0)
+		startnode = 0;
+	else if (priv->index == 1) {
+		struct fec_priv *priv0 = netdev_priv(fec_dev[0]);
+		startnode = priv0->phydev->addr + 1;
+	} else
+		startnode = 0;
+#else
+	startnode = 0;
+#endif
+#ifdef FEC_DEBUG
+	printk(KERN_ERR "%s priv->index %x, startnode %x\n",
+		__func__, priv->index, startnode);
+#endif
+	/* search for connect PHY device */
+	for (i = startnode; i < PHY_MAX_ADDR; i++) {
+		struct phy_device *const tmp_phydev =
+			priv->mdio_bus->phy_map[i];
+
+		if (!tmp_phydev) {
+#ifdef FEC_DEBUG
+			printk(KERN_INFO "%s no PHY here at"
+				"mii_bus->phy_map[%d]\n",
+				__func__, i);
+#endif
+			continue; /* no PHY here... */
+		}
+		phydev = tmp_phydev;
+#ifdef FEC_DEBUG
+		printk(KERN_INFO "%s find PHY here at"
+				"mii_bus->phy_map[%d]\n",
+				__func__, i);
+#endif
+		break; /* found it */
+	}
+
+	/* now we are supposed to have a proper phydev, to attach to... */
+	if (!phydev) {
+		printk(KERN_INFO "%s: Don't found any phy device at all\n",
+			dev->name);
+		return -ENODEV;
+	}
+
+	priv->link = 0;
+	priv->speed = 0;
+	priv->duplex = 0;
+#ifdef FEC_DEBUG
+	printk(KERN_INFO "%s phydev_busid %s\n", __func__, phydev->dev.bus_id);
+#endif
+	phydev = phy_connect(dev, dev_name(&phydev->dev),
+			&fec_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phydev)) {
+		printk(KERN_ERR " %s phy_connect failed\n", __func__);
+		return PTR_ERR(phydev);
+	}
+
+	printk(KERN_INFO "attached phy %i to driver %s\n",
+	phydev->addr, phydev->drv->name);
+	priv->phydev = phydev;
+	return 0;
+}
+
+static int fec_mdio_register(struct net_device *dev,
+	int slot)
+{
+	int err = 0;
+	struct fec_priv *fp = netdev_priv(dev);
+
+	fp->mdio_bus = mdiobus_alloc();
+	if (!fp->mdio_bus) {
+		printk(KERN_ERR "ethernet mdiobus_alloc fail\n");
+		return -ENOMEM;
+	}
+
+	if (slot == 0) {
+		fp->mdio_bus->name = "Coldfire FEC MII 0 Bus";
+		strcpy(fp->mdio_bus->id, "0");
+	} else if (slot == 1) {
+		fp->mdio_bus->name = "Coldfire FEC MII 1 Bus";
+		strcpy(fp->mdio_bus->id, "1");
+	} else {
+		printk(KERN_ERR "Now coldfire can not"
+			"support more than 2 mii bus\n");
+	}
+
+	fp->mdio_bus->read = &coldfire_fec_mdio_read;
+	fp->mdio_bus->write = &coldfire_fec_mdio_write;
+	fp->mdio_bus->priv = dev;
+	err = mdiobus_register(fp->mdio_bus);
+	if (err) {
+		mdiobus_free(fp->mdio_bus);
+		printk(KERN_ERR "%s: ethernet mdiobus_register fail %d\n",
+			dev->name, err);
+		return -EIO;
+	}
+
+	printk(KERN_INFO "mdiobus_register %s ok\n",
+		fp->mdio_bus->name);
+	return err;
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_open
+*
+* DESCRIPTION: This function performs the initialization of
+*				of FEC and corresponding KS8721 transiver
+*
+* RETURNS: If no error occurs, this function returns zero.
+*************************************************************************/
+static int mcf547x_fec_open(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+	int fduplex;
+	int i;
+	int channel;
+	int error_code = -EBUSY;
+
+	fp->link = 0;
+	fp->duplex = 0;
+	fp->speed = 0;
+	coldfire_fec_init_phy(dev);
+	phy_start(fp->phydev);
+
+	/* Receive the DMA channels */
+	channel = dma_set_channel_fec(fp->fecpriv_rx_requestor);
+
+	if (channel == -1) {
+		printk(KERN_ERR "Dma channel cannot be reserved\n");
+		goto ERRORS;
+	}
+
+	fp->fecpriv_fec_rx_channel = channel;
+
+	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler);
+
+	channel = dma_set_channel_fec(fp->fecpriv_tx_requestor);
+
+	if (channel == -1) {
+		printk(KERN_ERR "Dma channel cannot be reserved\n");
+		goto ERRORS;
+	}
+
+	fp->fecpriv_fec_tx_channel = channel;
+
+	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
+
+	/* init tasklet for controller reinitialization */
+	tasklet_init(&fp->fecpriv_tasklet_reinit,
+		fec_interrupt_fec_reinit, (unsigned long) dev);
+
+	/* Reset FIFOs */
+	FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
+	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+
+	/* Reset and disable FEC */
+	FEC_ECR(base_addr) = FEC_ECR_RESET;
+
+	udelay(10);
+
+	/* Clear all events */
+	FEC_EIR(base_addr) = FEC_EIR_CLEAR;
+
+	/* Reset FIFO status */
+	FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK;
+	FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK;
+
+	/* Set the default address */
+	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
+			      (fp->fecpriv_mac_addr[1] << 16) |
+			      (fp->fecpriv_mac_addr[2] << 8) |
+			      fp->fecpriv_mac_addr[3];
+	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
+			      (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
+
+	/* Reset the group address descriptor */
+	FEC_GALR(base_addr) = 0x00000000;
+	FEC_GAUR(base_addr) = 0x00000000;
+
+	/* Reset the individual address descriptor */
+	FEC_IALR(base_addr) = 0x00000000;
+	FEC_IAUR(base_addr) = 0x00000000;
+
+	/* Set the receive control register */
+	FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII;
+
+	/* Set the receive FIFO control register */
+	/*FEC_FECRFCR(base_addr) =
+	* FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK;*/
+	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR
+			| (FEC_FECRFCR_MSK
+			/* disable all but ...*/
+			& ~FEC_FECRFCR_FAE
+			/* enable frame accept error*/
+			& ~FEC_FECRFCR_RXW
+			/* enable receive wait condition*/
+			/*& ~FEC_FECRFCR_UF*/
+			/* enable FIFO underflow*/
+				);
+
+	/* Set the receive FIFO alarm register */
+	FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM;
+
+	/* Set the transmit FIFO control register */
+	/*FEC_FECTFCR(base_addr) =
+	FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK;*/
+	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR
+			| (FEC_FECTFCR_MSK
+			/* disable all but ... */
+			& ~FEC_FECTFCR_FAE
+			/* enable frame accept error */
+			/* & ~FEC_FECTFCR_TXW */
+			/*enable transmit wait condition*/
+			/*& ~FEC_FECTFCR_UF*/
+			/*enable FIFO underflow*/
+			& ~FEC_FECTFCR_OF);
+			/* enable FIFO overflow */
+
+	/* Set the transmit FIFO alarm register */
+	FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM;
+
+	/* Set the Tx FIFO watermark */
+	FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK;
+
+	/* Enable the transmitter to append the CRC */
+	FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC;
+
+	/* Enable the ethernet interrupts */
+	/*FEC_EIMR(base_addr) = FEC_EIMR_MASK;*/
+	FEC_EIMR(base_addr) = FEC_EIMR_DISABLE
+			| FEC_EIR_LC
+			| FEC_EIR_RL
+			| FEC_EIR_HBERR
+			| FEC_EIR_XFUN
+			| FEC_EIR_XFERR
+			| FEC_EIR_RFERR;
+
+#if 0
+	error_code = init_transceiver(base_addr, &fduplex);
+	if (error_code != 0) {
+		printk(KERN_ERR "Initialization of the "
+			"transceiver is failed\n");
+		goto ERRORS;
+	}
+#else
+	fduplex = 1;
+#endif
+	if (fduplex)
+		/* Enable the full duplex mode */
+		FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC;
+	else
+		/* Disable reception of frames while transmitting */
+		FEC_RCR(base_addr) |= FEC_RCR_DRT;
+
+	/* Enable MIB */
+	FEC_MIBC(base_addr) = FEC_MIBC_ENABLE;
+
+	/* Enable FEC */
+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+	FEC_MSCR(dev->base_addr) = FEC_MII_SPEED;
+	/* Initialize tx descriptors and start DMA for the transmission */
+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+
+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+
+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
+
+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+
+	/* Initialize rx descriptors and start DMA for the reception */
+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
+		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA);
+		if (!fp->askb_rx[i]) {
+			fp->fecpriv_rxdesc[i].dataPointer = 0;
+			fp->fecpriv_rxdesc[i].statCtrl = 0;
+			fp->fecpriv_rxdesc[i].length = 0;
+		} else {
+			skb_reserve(fp->askb_rx[i], 16);
+			fp->askb_rx[i]->dev = dev;
+			fp->fecpriv_rxdesc[i].dataPointer =
+			(unsigned int)virt_to_phys(fp->askb_rx[i]->tail);
+			fp->fecpriv_rxdesc[i].statCtrl =
+				MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
+			fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
+		}
+	}
+
+	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+	fp->fecpriv_current_rx = 0;
+
+	MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0,
+		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
+		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+
+	netif_start_queue(dev);
+	return 0;
+
+ERRORS:
+
+	/* Remove the channels and return with the error code */
+	if (fp->fecpriv_fec_rx_channel != -1) {
+		dma_disconnect(fp->fecpriv_fec_rx_channel);
+		dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
+		fp->fecpriv_fec_rx_channel = -1;
+	}
+
+	if (fp->fecpriv_fec_tx_channel != -1) {
+		dma_disconnect(fp->fecpriv_fec_tx_channel);
+		dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
+		fp->fecpriv_fec_tx_channel = -1;
+	}
+
+	return error_code;
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_close
+*
+* DESCRIPTION: This function performs the graceful stop of the
+*				transmission and disables FEC
+*
+* RETURNS: This function always returns zero.
+*************************************************************************/
+static int mcf547x_fec_close(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+	unsigned long time;
+	int i;
+
+	netif_stop_queue(dev);
+	phy_disconnect(fp->phydev);
+	phy_stop(fp->phydev);
+	/* Perform the graceful stop */
+	FEC_TCR(base_addr) |= FEC_TCR_GTS;
+
+	time = jiffies;
+
+	/* Wait for the graceful stop */
+	while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time <
+			(FEC_GR_TIMEOUT * HZ))
+		schedule();
+
+	/* Disable FEC */
+	FEC_ECR(base_addr) = FEC_ECR_DISABLE;
+
+	/* Reset the DMA channels */
+	spin_lock_irq(&fp->fecpriv_lock);
+	MCD_killDma(fp->fecpriv_fec_tx_channel);
+	spin_unlock_irq(&fp->fecpriv_lock);
+	dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
+	dma_disconnect(fp->fecpriv_fec_tx_channel);
+	fp->fecpriv_fec_tx_channel = -1;
+
+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
+		kfree(fp->fecpriv_txbuf[i]);
+		fp->fecpriv_txbuf[i] = NULL;
+	}
+
+	spin_lock_irq(&fp->fecpriv_lock);
+	MCD_killDma(fp->fecpriv_fec_rx_channel);
+	spin_unlock_irq(&fp->fecpriv_lock);
+
+	dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
+	dma_disconnect(fp->fecpriv_fec_rx_channel);
+	fp->fecpriv_fec_rx_channel = -1;
+
+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
+		if (fp->askb_rx[i]) {
+			kfree_skb(fp->askb_rx[i]);
+			fp->askb_rx[i] = NULL;
+		}
+	}
+
+	return 0;
+}
+
+/************************************************************************
+* +NAME: mcf547x_fec_get_stat
+*
+* RETURNS: This function returns the statistical information.
+*************************************************************************/
+static struct net_device_stats *mcf547x_fec_get_stats(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = dev->base_addr;
+
+	/* Receive the statistical information */
+	fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr);
+	fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr);
+	fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr);
+	fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr);
+
+	fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr);
+	fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr);
+
+	fp->fecpriv_stat.rx_length_errors =
+		FECSTAT_RMON_R_UNDERSIZE(base_addr) +
+		FECSTAT_RMON_R_OVERSIZE(base_addr) +
+		FECSTAT_RMON_R_FRAG(base_addr) +
+		FECSTAT_RMON_R_JAB(base_addr);
+	fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr);
+	fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr);
+	fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr);
+
+	fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr);
+	fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr);
+	fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr);
+
+	/* I hope that one frame doesn't have more than one error */
+	fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors +
+		fp->fecpriv_stat.rx_crc_errors +
+		fp->fecpriv_stat.rx_frame_errors +
+		fp->fecpriv_stat.rx_over_errors +
+		fp->fecpriv_stat.rx_dropped;
+	fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors +
+		fp->fecpriv_stat.tx_fifo_errors +
+		fp->fecpriv_stat.tx_window_errors +
+		fp->fecpriv_stat.tx_aborted_errors +
+		fp->fecpriv_stat.tx_heartbeat_errors +
+		fp->fecpriv_stat.tx_dropped;
+
+	return &fp->fecpriv_stat;
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_set_multicast_list
+*
+* DESCRIPTION: This function sets the frame filtering parameters
+*************************************************************************/
+static void mcf547x_fec_set_multicast_list(struct net_device *dev)
+{
+	unsigned int crc, data;
+	int j, k;
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+	struct netdev_hw_addr *ha;
+
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) {
+		/* Allow all incoming frames */
+		FEC_GALR(base_addr) = 0xFFFFFFFF;
+		FEC_GAUR(base_addr) = 0xFFFFFFFF;
+		return;
+	}
+
+	/* Reset the group address register */
+	FEC_GALR(base_addr) = 0x00000000;
+	FEC_GAUR(base_addr) = 0x00000000;
+
+	/* Process all addresses */
+	netdev_for_each_mc_addr(ha, dev) {
+		/* Processing must be only for the group addresses */
+		if (!(ha->addr[0] & 1))
+			continue;
+
+		/* Calculate crc value for the current address */
+		crc = 0xFFFFFFFF;
+		for (j = 0; j < dev->addr_len; j++) {
+			data = ha->addr[j];
+			for (k = 0; k < 8; k++, data >>= 1) {
+				if ((crc ^ data) & 1)
+					crc = (crc >> 1) ^ FEC_CRCPOL;
+				else
+					crc >>= 1;
+			}
+		}
+
+		/* Add this value */
+		crc >>= 26;
+		crc &= 0x3F;
+		if (crc > 31)
+			FEC_GAUR(base_addr) |= 0x1 << (crc - 32);
+		else
+			FEC_GALR(base_addr) |= 0x1 << crc;
+	}
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_set_mac_address
+*
+* DESCRIPTION: This function sets the MAC address
+*************************************************************************/
+static int mcf547x_fec_set_mac_address(struct net_device *dev, void *p)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+	struct sockaddr *addr = p;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	/* Copy a new address to the device structure */
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	/* Copy a new address to the private structure */
+	memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6);
+
+	/* Set the address to the registers */
+	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
+		(fp->fecpriv_mac_addr[1] << 16) |
+		(fp->fecpriv_mac_addr[2] << 8) |
+		fp->fecpriv_mac_addr[3];
+	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
+		(fp->fecpriv_mac_addr[5] << 16) |
+		0x8808;
+
+	return 0;
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_start_xmit
+*
+* DESCRIPTION: This function starts transmission of the frame using DMA
+*
+* RETURNS: This function always returns zero.
+*************************************************************************/
+static int mcf547x_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	void *data, *data_aligned;
+	int offset;
+
+	data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
+
+	if (!data) {
+		fp->fecpriv_stat.tx_dropped++;
+		dev_kfree_skb(skb);
+		return 0;
+	}
+
+	offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) -
+		(unsigned long)virt_to_phys(data);
+	data_aligned = (void *)((unsigned long)data + offset);
+	memcpy(data_aligned, skb->data, skb->len);
+
+	/* flush data cache before initializing
+	 * the descriptor and starting DMA */
+
+	spin_lock_irq(&fp->fecpriv_lock);
+
+	/* Initialize the descriptor */
+	fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data;
+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer
+		= (unsigned int) virt_to_phys(data_aligned);
+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len;
+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl
+		|= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY);
+	fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK;
+
+	if (fp->fecpriv_txbuf[fp->fecpriv_current_tx]
+		&& fp->fecpriv_current_tx == fp->fecpriv_next_tx)
+		netif_stop_queue(dev);
+
+	spin_unlock_irq(&fp->fecpriv_lock);
+
+	/* Tell the DMA to continue the transmission */
+	MCD_continDma(fp->fecpriv_fec_tx_channel);
+
+	dev_kfree_skb(skb);
+
+	dev->trans_start = jiffies;
+
+	return 0;
+}
+
+/************************************************************************
+* NAME: mcf547x_fec_tx_timeout
+*
+* DESCRIPTION: If the interrupt processing of received frames was lost
+*              and DMA stopped the reception, this function clears
+*              the transmission descriptors and starts DMA
+*
+*************************************************************************/
+static void mcf547x_fec_tx_timeout(struct net_device *dev)
+{
+	int i;
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+
+	spin_lock_irq(&fp->fecpriv_lock);
+	MCD_killDma(fp->fecpriv_fec_tx_channel);
+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
+		kfree(fp->fecpriv_txbuf[i]);
+		fp->fecpriv_txbuf[i] = NULL;
+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+	}
+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+
+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
+
+	/* Reset FIFOs */
+	FEC_FECFRST(base_addr) |= FEC_SW_RST;
+	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+
+	/* Reset and disable FEC */
+	/* FEC_ECR(base_addr) = FEC_ECR_RESET; */
+
+	/* Enable FEC */
+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+
+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+
+	spin_unlock_irq(&fp->fecpriv_lock);
+
+	netif_wake_queue(dev);
+
+}
+
+static const struct net_device_ops mcf547x_fec_netdev_ops = {
+	.ndo_open = mcf547x_fec_open,
+	.ndo_stop = mcf547x_fec_close,
+	.ndo_start_xmit = mcf547x_fec_start_xmit,
+	.ndo_set_multicast_list = mcf547x_fec_set_multicast_list,
+	.ndo_set_mac_address = mcf547x_fec_set_mac_address,
+	.ndo_tx_timeout = mcf547x_fec_tx_timeout,
+	.ndo_get_stats = mcf547x_fec_get_stats,
+};
+
+/*
+ * Initialize a FEC device
+ */
+int fec_enet_init(struct net_device *dev, int slot)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	int i;
+
+	fp->index = slot;
+	fp->netdev = dev;
+	fec_dev[slot] = dev;
+
+	if (slot == 0) {
+		/* disable fec0 */
+		FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE;
+
+		/* setup the interrupt handler */
+		dev->irq = 64 + ISC_FEC0;
+
+		if (request_irq(dev->irq, fec_interrupt_handler,
+			IRQF_DISABLED, "ColdFire FEC 0", dev)) {
+			dev->irq = 0;
+			printk(KERN_ERR "Cannot allocate FEC0 IRQ\n");
+		} else {
+			/* interrupt priority and level */
+			MCF_ICR(ISC_FEC0) = ILP_FEC0;
+		}
+
+		/* fec base address */
+		dev->base_addr = FEC_BASE_ADDR_FEC0;
+
+		/* requestor numbers */
+		fp->fecpriv_rx_requestor = DMA_FEC0_RX;
+		fp->fecpriv_tx_requestor = DMA_FEC0_TX;
+
+		/* fec0 handlers */
+		fp->fecpriv_interrupt_fec_rx_handler =
+			fec_interrupt_fec_rx_handler_fec0;
+		fp->fecpriv_interrupt_fec_tx_handler =
+			fec_interrupt_fec_tx_handler_fec0;
+
+		/* tx descriptors */
+		fp->fecpriv_txdesc = (void *)FEC_TX_DESC_FEC0;
+
+		/* rx descriptors */
+		fp->fecpriv_rxdesc = (void *)FEC_RX_DESC_FEC0;
+
+		/* mac addr
+		if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] ||
+		    uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) {
+			 use uboot enet 0 addr
+			memcpy(fec_mac_addr_fec0, uboot_enet0, 6);
+		}*/
+		fec_mac_addr_fec0[0] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC0) >> 24) & 0xFF;
+		fec_mac_addr_fec0[1] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC0) >> 16) & 0xFF;
+		fec_mac_addr_fec0[2] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC0) >> 8) & 0xFF;
+		fec_mac_addr_fec0[3] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC0)) & 0xFF;
+		fec_mac_addr_fec0[4] =
+			(FEC_PAUR(FEC_BASE_ADDR_FEC0) >> 24) & 0xFF;
+		fec_mac_addr_fec0[5] =
+			(FEC_PAUR(FEC_BASE_ADDR_FEC0) >> 16) & 0xFF;
+
+		fp->fecpriv_mac_addr = fec_mac_addr_fec0;
+	} else {
+		/* disable fec1 */
+		FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE;
+#ifdef FEC_2
+		/* setup the interrupt handler */
+		dev->irq = 64 + ISC_FEC1;
+
+		if (request_irq(dev->irq, fec_interrupt_handler,
+			IRQF_DISABLED, "ColdFire FEC 1", dev)) {
+			dev->irq = 0;
+			printk(KERN_ERR "Cannot allocate FEC1 IRQ\n");
+		} else {
+			/* interrupt priority and level */
+			MCF_ICR(ISC_FEC1) = ILP_FEC1;
+		}
+
+		/* fec base address */
+		dev->base_addr = FEC_BASE_ADDR_FEC1;
+
+		/* requestor numbers */
+		fp->fecpriv_rx_requestor = DMA_FEC1_RX;
+		fp->fecpriv_tx_requestor = DMA_FEC1_TX;
+
+		/* fec1 handlers */
+		fp->fecpriv_interrupt_fec_rx_handler =
+			fec_interrupt_fec_rx_handler_fec1;
+		fp->fecpriv_interrupt_fec_tx_handler =
+			fec_interrupt_fec_tx_handler_fec1;
+
+		/* tx descriptors */
+		fp->fecpriv_txdesc = (void *)FEC_TX_DESC_FEC1;
+
+		/* rx descriptors */
+		fp->fecpriv_rxdesc = (void *)FEC_RX_DESC_FEC1;
+
+		/* mac addr
+		if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] ||
+		    uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) {
+			use uboot enet 1 addr
+			memcpy(fec_mac_addr_fec1, uboot_enet1, 6);
+		}*/
+		fec_mac_addr_fec1[0] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC1) >> 24) & 0xFF;
+		fec_mac_addr_fec1[1] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC1) >> 16) & 0xFF;
+		fec_mac_addr_fec1[2] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC1) >> 8) & 0xFF;
+		fec_mac_addr_fec1[3] =
+			(FEC_PALR(FEC_BASE_ADDR_FEC1)) & 0xFF;
+		fec_mac_addr_fec1[4] =
+			(FEC_PAUR(FEC_BASE_ADDR_FEC1) >> 24) & 0xFF;
+		fec_mac_addr_fec1[5] =
+			(FEC_PAUR(FEC_BASE_ADDR_FEC1) >> 16) & 0xFF;
+
+		fp->fecpriv_mac_addr = fec_mac_addr_fec1;
+#endif
+	}
+
+	/* clear MIB */
+	memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN);
+
+	/* clear the statistics structure */
+	memset((void *) &(fp->fecpriv_stat), 0,
+	       sizeof(struct net_device_stats));
+
+	/* grab the FEC initiators */
+	dma_set_initiator(fp->fecpriv_tx_requestor);
+	fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor);
+	dma_set_initiator(fp->fecpriv_rx_requestor);
+	fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor);
+
+	/* reset the DMA channels */
+	fp->fecpriv_fec_rx_channel = -1;
+	fp->fecpriv_fec_tx_channel = -1;
+
+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
+		fp->askb_rx[i] = NULL;
+
+	/* initialize the pointers to the socket buffers */
+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+		fp->fecpriv_txbuf[i] = NULL;
+
+	ether_setup(dev);
+
+	dev->netdev_ops = &mcf547x_fec_netdev_ops;
+	dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ;
+
+	memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
+
+	spin_lock_init(&fp->fecpriv_lock);
+
+	/* Initialize FEC/I2C/IRQ Pin Assignment Register*/
+	FEC_GPIO_PAR_FECI2CIRQ &= 0xF;
+	FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ;
+
+	return 0;
+}
+
+/*
+ * Module Initialization
+ */
+int __init fec_init(void)
+{
+	struct net_device *dev;
+	int i;
+	int err;
+	struct fec_priv *fep;
+
+	printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION);
+
+	for (i = 0; i < FEC_MAX_PORTS; i++) {
+		dev = alloc_etherdev(sizeof(struct fec_priv));
+		if (!dev)
+			return -ENOMEM;
+		err = fec_enet_init(dev, i);
+		if (err) {
+			free_netdev(dev);
+			continue;
+		}
+
+		fep = netdev_priv(dev);
+		FEC_MSCR(dev->base_addr) = FEC_MII_SPEED;
+#ifdef CONFIG_FEC_548x_SHARED_PHY
+		if (i == 0)
+			err = fec_mdio_register(dev, i);
+		else {
+			struct fec_priv *priv0 = netdev_priv(fec_dev[0]);
+			fep->mdio_bus = priv0->mdio_bus;
+			printk(KERN_INFO "FEC%d SHARED the %s ok\n",
+				i, fep->mdio_bus->name);
+		}
+#else
+		err = fec_mdio_register(dev, i);
+#endif
+		if (err) {
+			printk(KERN_ERR "%s: ethernet fec_mdio_register\n",
+				dev->name);
+			free_netdev(dev);
+			return -ENOMEM;
+		}
+
+		if (register_netdev(dev) != 0) {
+			free_netdev(dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO "%s: ethernet %s\n",
+				dev->name, dev->dev_addr);
+	}
+	return 0;
+}
+
+/*
+ * Stop a device
+ */
+void fec_stop(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+
+	dma_remove_initiator(fp->fecpriv_initiator_tx);
+	dma_remove_initiator(fp->fecpriv_initiator_rx);
+
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+}
+
+/************************************************************************
+* NAME: fec_interrupt_tx_handler
+*
+* DESCRIPTION: This function is called when the data
+*              transmission from the buffer to the FEC is completed.
+*
+*************************************************************************/
+void fec_interrupt_fec_tx_handler(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+
+	/* Release the socket buffer */
+	kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
+	fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
+
+	fp->fecpriv_current_tx =
+		(fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK;
+
+	if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) {
+		for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx;
+			fp->fecpriv_current_tx =
+			(fp->fecpriv_current_tx + 1)
+			& FEC_TX_INDEX_MASK) {
+			if (fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
+				kfree(fp->fecpriv_txbuf[
+					fp->fecpriv_current_tx]);
+				fp->fecpriv_txbuf[fp->fecpriv_current_tx]
+					= NULL;
+			}
+		}
+	}
+
+	if (netif_queue_stopped(dev))
+		netif_wake_queue(dev);
+}
+
+/************************************************************************
+* NAME: fec_interrupt_rx_handler
+*
+* DESCRIPTION: This function is called when the data
+*              reception from the FEC to the reception buffer is completed.
+*
+*************************************************************************/
+void fec_interrupt_fec_rx_handler(struct net_device *dev)
+{
+	struct fec_priv *fp = netdev_priv(dev);
+	struct sk_buff *skb;
+	int i;
+
+	fp->fecpriv_rxflag = 1;
+	/* Some buffers can be missed */
+	if (!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl
+			& MCD_FEC_END_FRAME)) {
+		/* Find a valid index */
+		for (i = 0; ((i < FEC_RX_BUF_NUMBER) &&
+			!(fp->fecpriv_rxdesc[
+			fp->fecpriv_current_rx].statCtrl
+			& MCD_FEC_END_FRAME)); i++,
+			(fp->fecpriv_current_rx =
+			(fp->fecpriv_current_rx + 1)
+			& FEC_RX_INDEX_MASK))
+			;
+
+		if (i == FEC_RX_BUF_NUMBER) {
+			/* There are no data to process */
+			/* Tell the DMA to continue the reception */
+			MCD_continDma(fp->fecpriv_fec_rx_channel);
+
+			fp->fecpriv_rxflag = 0;
+
+			return;
+		}
+	}
+
+	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl
+			& MCD_FEC_END_FRAME;
+		fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1)
+						& FEC_RX_INDEX_MASK) {
+		if ((fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length
+			<= FEC_MAXBUF_SIZE) &&
+			(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length
+				> 4)) {
+			/* --tym-- */
+			skb = fp->askb_rx[fp->fecpriv_current_rx];
+			if (!skb)
+				fp->fecpriv_stat.rx_dropped++;
+			else {
+			/*
+			* flush data cache before initializing
+			* the descriptor and starting DMA
+			*/
+				skb_put(skb,
+					(fp->fecpriv_rxdesc[
+					 fp->fecpriv_current_rx].length - 4));
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+			}
+			fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &=
+				~MCD_FEC_END_FRAME;
+			/* allocate new skbuff */
+			fp->askb_rx[fp->fecpriv_current_rx] =
+				alloc_skb(FEC_MAXBUF_SIZE + 16,
+					/*GFP_ATOMIC |*/ GFP_DMA);
+			if (!fp->askb_rx[fp->fecpriv_current_rx]) {
+				fp->fecpriv_rxdesc[
+				fp->fecpriv_current_rx].dataPointer
+					= 0;
+				fp->fecpriv_rxdesc[
+					fp->fecpriv_current_rx].length = 0;
+				fp->fecpriv_stat.rx_dropped++;
+			} else {
+				skb_reserve(
+				fp->askb_rx[fp->fecpriv_current_rx], 16);
+				fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
+
+				/*
+				 * flush data cache before initializing
+				 * the descriptor and starting DMA
+				 */
+
+				fp->fecpriv_rxdesc[
+					fp->fecpriv_current_rx].dataPointer =
+					(unsigned int) virt_to_phys(
+					fp->askb_rx[
+						fp->fecpriv_current_rx]->tail);
+				fp->fecpriv_rxdesc[
+					fp->fecpriv_current_rx].length =
+					FEC_MAXBUF_SIZE;
+				fp->fecpriv_rxdesc[
+					fp->fecpriv_current_rx].statCtrl |=
+					MCD_FEC_BUF_READY;
+
+				/*
+				 * flush data cache before initializing
+				 * the descriptor and starting DMA
+				 */
+			}
+		}
+
+	}
+
+	/* Tell the DMA to continue the reception */
+	MCD_continDma(fp->fecpriv_fec_rx_channel);
+
+	fp->fecpriv_rxflag = 0;
+}
+
+/************************************************************************
+* NAME: fec_interrupt_handler
+*
+* DESCRIPTION: This function is called when some special errors occur
+*
+*************************************************************************/
+irqreturn_t fec_interrupt_handler(int irq, void *dev_id)
+{
+
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+	unsigned long events;
+
+	/* Read and clear the events */
+	events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
+
+	if (events & FEC_EIR_HBERR) {
+		fp->fecpriv_stat.tx_heartbeat_errors++;
+		FEC_EIR(base_addr) = FEC_EIR_HBERR;
+	}
+
+	/* receive/transmit FIFO error */
+	if (((events & FEC_EIR_RFERR) != 0)
+		|| ((events & FEC_EIR_XFERR) != 0)) {
+		/* kill DMA receive channel */
+		MCD_killDma(fp->fecpriv_fec_rx_channel);
+
+		/* kill running transmission by DMA */
+		MCD_killDma(fp->fecpriv_fec_tx_channel);
+
+		/* Reset FIFOs */
+		FEC_FECFRST(base_addr) |= FEC_SW_RST;
+		FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+
+		/* reset receive FIFO status register */
+		FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE |
+					 FEC_FECRFSR_RXW |
+					 FEC_FECRFSR_UF;
+
+		/* reset transmit FIFO status register */
+		FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE |
+					 FEC_FECTFSR_TXW |
+					 FEC_FECTFSR_UF |
+					 FEC_FECTFSR_OF;
+
+		/* reset RFERR and XFERR event */
+		FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
+
+		/* stop queue */
+		netif_stop_queue(dev);
+
+		/* execute reinitialization as tasklet */
+		tasklet_schedule(&fp->fecpriv_tasklet_reinit);
+
+		fp->fecpriv_stat.rx_dropped++;
+	}
+
+	/* transmit FIFO underrun */
+	if ((events & FEC_EIR_XFUN) != 0) {
+		/* reset XFUN event */
+		FEC_EIR(base_addr) = FEC_EIR_XFUN;
+		fp->fecpriv_stat.tx_aborted_errors++;
+	}
+
+	/* late collision */
+	if ((events & FEC_EIR_LC) != 0) {
+		/* reset LC event */
+		FEC_EIR(base_addr) = FEC_EIR_LC;
+		fp->fecpriv_stat.tx_aborted_errors++;
+	}
+
+	/* collision retry limit */
+	if ((events & FEC_EIR_RL) != 0) {
+		/* reset RL event */
+		FEC_EIR(base_addr) = FEC_EIR_RL;
+		fp->fecpriv_stat.tx_aborted_errors++;
+	}
+	return 0;
+}
+
+/************************************************************************
+* NAME: fec_interrupt_reinit
+*
+* DESCRIPTION: This function is called from interrupt handler
+*              when controller must be reinitialized.
+*
+*************************************************************************/
+void fec_interrupt_fec_reinit(unsigned long data)
+{
+	int i;
+	struct net_device *dev = (struct net_device *)data;
+	struct fec_priv *fp = netdev_priv(dev);
+	unsigned long base_addr = (unsigned long) dev->base_addr;
+
+	/* Initialize reception descriptors and start DMA for the reception */
+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
+		if (!fp->askb_rx[i]) {
+			fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16,
+					GFP_ATOMIC | GFP_DMA);
+			if (!fp->askb_rx[i]) {
+				fp->fecpriv_rxdesc[i].dataPointer = 0;
+				fp->fecpriv_rxdesc[i].statCtrl = 0;
+				fp->fecpriv_rxdesc[i].length = 0;
+				continue;
+			}
+			fp->askb_rx[i]->dev = dev;
+			skb_reserve(fp->askb_rx[i], 16);
+		}
+		fp->fecpriv_rxdesc[i].dataPointer =
+			(unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
+		fp->fecpriv_rxdesc[i].statCtrl =
+			MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
+		fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
+	}
+
+	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+	fp->fecpriv_current_rx = 0;
+
+	/* restart frame transmission */
+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
+		kfree(fp->fecpriv_txbuf[i]);
+		fp->fecpriv_txbuf[i] = NULL;
+		fp->fecpriv_stat.tx_dropped++;
+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+	}
+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
+
+	/* flush entire data cache before restarting the DMA */
+
+	/* restart DMA from beginning */
+	MCD_startDma(fp->fecpriv_fec_rx_channel,
+		     (char *) fp->fecpriv_rxdesc, 0,
+		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
+		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+
+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+
+	/* Enable FEC */
+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+
+	netif_wake_queue(dev);
+}
+
+/************************************************************************
+* NAME: fec_interrupt_tx_handler_fec0
+*
+* DESCRIPTION: This is the DMA interrupt handler using  for FEC0
+*              transmission.
+*
+*************************************************************************/
+void fec_interrupt_fec_tx_handler_fec0(void)
+{
+	fec_interrupt_fec_tx_handler(fec_dev[0]);
+}
+
+#ifdef FEC_2
+/************************************************************************
+* NAME: fec_interrupt_tx_handler_fec1
+*
+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
+*              transmission.
+*
+*************************************************************************/
+void fec_interrupt_fec_tx_handler_fec1(void)
+{
+	fec_interrupt_fec_tx_handler(fec_dev[1]);
+}
+#endif
+
+/************************************************************************
+* NAME: fec_interrupt_rx_handler_fec0
+*
+* DESCRIPTION: This is the DMA interrupt handler using for the FEC0
+*              reception.
+*
+*************************************************************************/
+void fec_interrupt_fec_rx_handler_fec0(void)
+{
+	fec_interrupt_fec_rx_handler(fec_dev[0]);
+}
+
+#ifdef FEC_2
+/************************************************************************
+* NAME: fec_interrupt_rx_handler_fec1
+*
+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
+*              reception.
+*
+*************************************************************************/
+void fec_interrupt_fec_rx_handler_fec1(void)
+{
+	fec_interrupt_fec_rx_handler(fec_dev[1]);
+}
+
+#endif
+
+#ifndef MODULE
+/************************************************************************
+* NAME: fec_mac_setup0
+*
+* DESCRIPTION: This function sets the MAC address of FEC0 from command line
+*
+*************************************************************************/
+int __init fec_mac_setup0(char *s)
+{
+	if (!s || !*s)
+		return 1;
+
+	if (fec_str_to_mac(s, fec_mac_addr_fec0))
+		printk(KERN_ERR "The MAC address of FEC0 "
+			"cannot be set from command line");
+	return 1;
+}
+
+#ifdef FEC_2
+
+/************************************************************************
+* NAME: fec_mac_setup1
+*
+* DESCRIPTION: This function sets the MAC address of FEC1 from command line
+*
+*************************************************************************/
+int __init fec_mac_setup1(char *s)
+{
+	if (!s || !*s)
+		return 1;
+
+	if (fec_str_to_mac(s, fec_mac_addr_fec1))
+		printk(KERN_ERR "The MAC address of FEC1 "
+			"cannot be set from command line\n");
+	return 1;
+}
+#endif
+
+/************************************************************************
+* NAME: fec_str_to_mac
+*
+* DESCRIPTION: This function interprets the character string into MAC addr
+*
+*************************************************************************/
+int fec_str_to_mac(char *str_mac, unsigned char* addr)
+{
+	unsigned long val;
+	char c;
+	unsigned long octet[6], *octetptr = octet;
+	int i;
+
+again:
+	val = 0;
+	while ((c = *str_mac) != '\0') {
+		if ((c >= '0') && (c <= '9')) {
+			val = (val * 16) + (c - '0');
+			str_mac++;
+			continue;
+		} else if (((c >= 'a') && (c <= 'f'))
+			|| ((c >= 'A') && (c <= 'F'))) {
+			val = (val << 4) +
+				(c + 10 -
+				(((c >= 'a') && (c <= 'f')) ? 'a' : 'A'));
+			str_mac++;
+			continue;
+		}
+		break;
+	}
+	if (*str_mac == ':') {
+		*octetptr++ = val, str_mac++;
+		if (octetptr >= octet + 6)
+			return 1;
+		goto again;
+	}
+
+	/* Check for trailing characters */
+	if (*str_mac && !(*str_mac == ' '))
+		return 1;
+
+	*octetptr++ = val;
+
+	if ((octetptr - octet) == 6) {
+		for (i = 0; i <= 6; i++)
+			addr[i] = octet[i];
+	} else
+		return 1;
+
+	return 0;
+}
+#endif
--- /dev/null
+++ b/drivers/net/fec_m547x.h
@@ -0,0 +1,241 @@
+#ifndef FEC_M547X_H
+#define	FEC_M547X_H
+/*
+ * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define   FEC_BASE_ADDR_FEC0                ((unsigned int)MCF_MBAR + 0x9000)
+#define   FEC_BASE_ADDR_FEC1                ((unsigned int)MCF_MBAR + 0x9800)
+
+#define   FEC_FECI2CIRQ                     (0xFFC0)
+#define   FEC_GPIO_PAR_FECI2CIRQ            \
+	(*(volatile unsigned short *)((unsigned int)MCF_MBAR + 0xA44))
+
+#define   FEC_ECR_DISABLE                   (0x00000000)
+
+#define   FEC_ECR(x)                        \
+	(*(volatile unsigned int *)(x + 0x024))
+#define   FEC_EIR(x)                        \
+	(*(volatile unsigned int *)(x + 0x004))
+#define   FEC_PALR(x)                       \
+	(*(volatile unsigned int *)(x + 0x0E4))
+#define   FEC_PAUR(x)                       \
+	(*(volatile unsigned int *)(x + 0x0E8))
+#define   FEC_IALR(x)                       \
+	(*(volatile unsigned int *)(x + 0x11C))
+#define   FEC_IAUR(x)                       \
+	(*(volatile unsigned int *)(x + 0x118))
+#define   FEC_GALR(x)                       \
+	(*(volatile unsigned int *)(x + 0x124))
+#define   FEC_GAUR(x)                       \
+	(*(volatile unsigned int *)(x + 0x120))
+#define   FEC_RCR(x)                        \
+	(*(volatile unsigned int *)(x + 0x084))
+#define   FEC_FECRFCR(x)                    \
+	(*(volatile unsigned int *)(x + 0x18C))
+#define   FEC_FECRFAR(x)                    \
+	(*(volatile unsigned int *)(x + 0x198))
+#define   FEC_FECTFCR(x)                    \
+	(*(volatile unsigned int *)(x + 0x1AC))
+#define   FEC_FECTFAR(x)                    \
+	(*(volatile unsigned int *)(x + 0x1B8))
+#define   FEC_FECTFWR(x)                    \
+	(*(volatile unsigned int *)(x + 0x144))
+#define   FEC_CTCWR(x)                      \
+	(*(volatile unsigned int *)(x + 0x1C8))
+#define   FEC_EIMR(x)                       \
+	(*(volatile unsigned int *)(x + 0x008))
+#define   FEC_TCR(x)                        \
+	(*(volatile unsigned int *)(x + 0x0C4))
+#define   FEC_MIBC(x)                       \
+	(*(volatile unsigned int *)(x + 0x064))
+#define   FEC_MSCR(x)                       \
+	(*(volatile unsigned int *)(x + 0x044))
+#define   FEC_FECTFDR(x)                    \
+	(*(volatile unsigned int *)(x + 0x1A4))
+#define   FEC_FECRFDR(x)                    \
+	(*(volatile unsigned int *)(x + 0x184))
+#define   FEC_FECTFSR(x)                    \
+	(*(volatile unsigned int *)(x + 0x1A8))
+#define   FEC_FECRFSR(x)		    \
+	(*(volatile unsigned int *)(x + 0x188))
+#define   FECSTAT_RMON_R_PACKETS(x)         \
+	(*(volatile unsigned int *)(x + 0x284))
+#define   FECSTAT_RMON_T_PACKETS(x)         \
+	(*(volatile unsigned int *)(x + 0x204))
+#define   FECSTAT_RMON_R_OCTETS(x)          \
+	(*(volatile unsigned int *)(x + 0x2C4))
+#define   FECSTAT_RMON_T_OCTETS(x)          \
+	(*(volatile unsigned int *)(x + 0x244))
+#define   FECSTAT_RMON_R_UNDERSIZE(x)       \
+	(*(volatile unsigned int *)(x + 0x294))
+#define   FECSTAT_RMON_R_OVERSIZE(x)        \
+	(*(volatile unsigned int *)(x + 0x298))
+#define   FECSTAT_RMON_R_FRAG(x)            \
+	(*(volatile unsigned int *)(x + 0x29C))
+#define   FECSTAT_RMON_R_JAB(x)             \
+	(*(volatile unsigned int *)(x + 0x2A0))
+#define   FECSTAT_RMON_R_MC_PKT(x)          \
+	(*(volatile unsigned int *)(x + 0x28C))
+#define   FECSTAT_RMON_T_COL(x)             \
+	(*(volatile unsigned int *)(x + 0x224))
+#define   FECSTAT_IEEE_R_ALIGN(x)           \
+	(*(volatile unsigned int *)(x + 0x2D4))
+#define   FECSTAT_IEEE_R_CRC(x)             \
+	(*(volatile unsigned int *)(x + 0x2D0))
+#define   FECSTAT_IEEE_R_MACERR(x)          \
+	(*(volatile unsigned int *)(x + 0x2D8))
+#define   FECSTAT_IEEE_T_CSERR(x)           \
+	(*(volatile unsigned int *)(x + 0x268))
+#define   FECSTAT_IEEE_T_MACERR(x)          \
+	(*(volatile unsigned int *)(x + 0x264))
+#define   FECSTAT_IEEE_T_LCOL(x)            \
+	(*(volatile unsigned int *)(x + 0x25C))
+#define   FECSTAT_IEEE_R_OCTETS_OK(x)       \
+	(*(volatile unsigned int *)(x + 0x2E0))
+#define   FECSTAT_IEEE_T_OCTETS_OK(x)       \
+	(*(volatile unsigned int *)(x + 0x274))
+#define   FECSTAT_IEEE_R_DROP(x)            \
+	(*(volatile unsigned int *)(x + 0x2C8))
+#define   FECSTAT_IEEE_T_DROP(x)            \
+	(*(volatile unsigned int *)(x + 0x248))
+#define   FECSTAT_IEEE_R_FRAME_OK(x)        \
+	(*(volatile unsigned int *)(x + 0x2CC))
+#define   FECSTAT_IEEE_T_FRAME_OK(x)        \
+	(*(volatile unsigned int *)(x + 0x24C))
+#define   FEC_MMFR(x)                       \
+	(*(volatile unsigned int *)(x + 0x040))
+#define   FEC_FECFRST(x)                    \
+	(*(volatile unsigned int *)(x + 0x1C4))
+
+#define   FEC_MAX_FRM_SIZE                  (1518)
+#define   FEC_MAXBUF_SIZE                   (1520)
+
+/* Register values */
+#define   FEC_ECR_RESET                     (0x00000001)
+#define   FEC_EIR_CLEAR                     (0xFFFFFFFF)
+#define   FEC_EIR_RL                        (0x00100000)
+#define   FEC_EIR_HBERR                     (0x80000000)
+#define   FEC_EIR_BABR			    (0x40000000)
+/* babbling receive error */
+#define   FEC_EIR_BABT			    (0x20000000)
+/* babbling transmit error */
+#define   FEC_EIR_TXF		            (0x08000000)
+/* transmit frame interrupt */
+#define   FEC_EIR_MII			    (0x00800000)
+/* MII interrupt */
+#define   FEC_EIR_LC			    (0x00200000)
+/* late collision */
+#define   FEC_EIR_XFUN			    (0x00080000)
+/* transmit FIFO underrun */
+#define   FEC_EIR_XFERR			    (0x00040000)
+/* transmit FIFO error */
+#define   FEC_EIR_RFERR			    (0x00020000)
+/* receive FIFO error */
+#define   FEC_RCR_MAX_FRM_SIZE              (FEC_MAX_FRM_SIZE << 16)
+#define   FEC_RCR_MII                       (0x00000004)
+#define   FEC_FECRFCR_FAE		    (0x00400000)
+/* frame accept error */
+#define   FEC_FECRFCR_RXW		    (0x00200000)
+/* receive wait condition */
+#define   FEC_FECRFCR_UF		    (0x00100000)
+/* receive FIFO underflow */
+#define   FEC_FECRFCR_FRM                   (0x08000000)
+#define   FEC_FECRFCR_GR                    (0x7 << 24)
+
+#define   FEC_EIMR_DISABLE		    (0x00000000)
+
+#define   FEC_FECRFAR_ALARM                 (0x300)
+#define   FEC_FECTFCR_FRM                   (0x08000000)
+#define   FEC_FECTFCR_GR                    (0x7 << 24)
+#define   FEC_FECTFCR_FAE		    (0x00400000)
+/* frame accept error */
+#define   FEC_FECTFCR_TXW		    (0x00040000)
+/* transmit wait condition */
+#define   FEC_FECTFCR_UF		    (0x00100000)
+/* transmit FIFO underflow */
+#define   FEC_FECTFCR_OF		    (0x00080000)
+/* transmit FIFO overflow */
+
+#define   FEC_FECTFAR_ALARM                 (0x100)
+#define   FEC_FECTFWR_XWMRK                 (0x00000000)
+
+#define   FEC_FECTFSR_MSK                   (0xC0B00000)
+#define   FEC_FECTFSR_TXW                   (0x40000000)
+/* transmit wait condition */
+#define   FEC_FECTFSR_FAE                   (0x00800000)
+/* frame accept error */
+#define   FEC_FECTFSR_UF                    (0x00200000)
+/* transmit FIFO underflow */
+#define   FEC_FECTFSR_OF                    (0x00100000)
+/* transmit FIFO overflow */
+
+#define   FEC_FECRFSR_MSK                   (0x80F00000)
+#define   FEC_FECRFSR_FAE                   (0x00800000)
+/* frame accept error */
+#define   FEC_FECRFSR_RXW                   (0x00400000)
+/* receive wait condition */
+#define   FEC_FECRFSR_UF                    (0x00200000)
+/* receive FIFO underflow */
+
+#define   FEC_CTCWR_TFCW_CRC                (0x03000000)
+#define   FEC_TCR_FDEN                      (0x00000004)
+#define   FEC_TCR_HBC                       (0x00000002)
+#define   FEC_RCR_DRT                       (0x00000002)
+#define   FEC_EIMR_MASK                     (FEC_EIR_RL | FEC_EIR_HBERR)
+#define   FEC_ECR_ETHEREN                   (0x00000002)
+#define   FEC_FECTFCR_MSK                   (0x00FC0000)
+#define   FEC_FECRFCR_MSK                   (0x00F80000)
+#define   FEC_EIR_GRA                       (0x10000000)
+#define   FEC_TCR_GTS                       (0x00000001)
+#define   FEC_MIBC_ENABLE                   (0x00000000)
+#define   FEC_MIB_LEN                       (228)
+#define   FEC_PHY_ADDR                      (0x01)
+
+#define FEC_RX_DMA_PRI                      (6)
+#define FEC_TX_DMA_PRI                      (6)
+
+#define   FEC_TX_BUF_NUMBER                 (8)
+#define   FEC_RX_BUF_NUMBER                 (64)
+
+#define   FEC_TX_INDEX_MASK                 (0x7)
+#define   FEC_RX_INDEX_MASK                 (0x3f)
+
+#define   FEC_RX_DESC_FEC0                  SYS_SRAM_FEC_START
+#define   FEC_TX_DESC_FEC0                  \
+	(FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec))
+
+#define   FEC_RX_DESC_FEC1                  \
+	(SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2)
+#define   FEC_TX_DESC_FEC1                  \
+	(FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec))
+
+#define   FEC_EIR_MII                       (0x00800000)
+#define   FEC_MMFR_READ                     (0x60020000)
+#define   FEC_MMFR_WRITE                    (0x50020000)
+
+#define   FEC_FLAGS_RX                      (0x00000001)
+
+#define   FEC_CRCPOL                        (0xEDB88320)
+
+#define   FEC_MII_TIMEOUT                   (2)
+#define   FEC_GR_TIMEOUT                    (1)
+#define   FEC_TX_TIMEOUT                    (1)
+#define   FEC_RX_TIMEOUT                    (1)
+
+#define   FEC_SW_RST                        0x2000000
+#define   FEC_RST_CTL                       0x1000000
+
+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
+		 unsigned int *data);
+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
+		  unsigned int data);
+
+#define FEC_MII_SPEED                   \
+	((MCF_CLK / 2) / ((2500000 / 2) * 2))
+#endif
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -62,6 +62,11 @@ config BROADCOM_PHY
 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
 	  and BCM5482 PHYs.
 
+config BROADCOM5222_PHY
+	tristate "Drivers for Broadcom5222 PHY"
+	---help---
+	  Currently supports the BCM5222 PHYs.
+
 config BCM63XX_PHY
 	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
 	---help---
@@ -82,6 +87,16 @@ config NATIONAL_PHY
 	---help---
 	  Currently supports the DP83865 PHY.
 
+config NATIONAL8364x_PHY
+	tristate "Drivers for National Semiconductor dp83640 PHYs"
+	---help---
+	  Currently supports the DP83640 PHY.
+
+config NATIONAL8384x_PHY
+	tristate "Drivers for National Semiconductor dp83848 dp83849 PHYs"
+	---help---
+	  Currently supports the DP83848 PHY.
+
 config STE10XP
 	depends on PHYLIB
 	tristate "Driver for STMicroelectronics STe10Xp PHYs"
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+obj-$(CONFIG_BROADCOM5222_PHY)  += broadcom522x.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
@@ -28,6 +29,8 @@ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
 obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+obj-$(CONFIG_NATIONAL8364x_PHY) +=national836x.o
+obj-$(CONFIG_NATIONAL8384x_PHY) +=national8384x.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
--- /dev/null
+++ b/drivers/net/phy/broadcom522x.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *	Chenghu Wu <b16972@freescale.com>
+ *
+ * Driver for broadcom PHYs 522x
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+/* DP83865 phy identifier values */
+#define BCM5222_PHY_ID	0x00406320
+
+/* PHY Register */
+#define BCM5222_TIMEOUT                 0x100
+
+/* MII Registers */
+#define BCM5222_CTRL                    0x00
+#define BCM5222_STATUS                  0x01
+#define BCM5222_ID_HIGH                 0x02
+#define BCM5222_ID_LOW                  0x03
+#define BCM5222_AN_ADV                  0x04
+#define BCM5222_AN_LP                   0x05
+#define BCM5222_AN_EXP                  0x06
+#define BCM5222_AN_NEXTPG               0x07
+#define BCM5222_AN_LP_NPTX              0x08
+#define BCM5222_AUX_CS                  0x18
+#define BCM5222_AUX_STATUS              0x19
+
+/* CONTROL Bits */
+#define BCM5222_CTRL_RESET              0x8000
+#define BCM5222_CTRL_LOOPBACK           0x4000
+#define BCM5222_CTRL_FORCE              0x2000
+#define BCM5222_CTRL_AUTOEN             0x1000
+#define BCM5222_CTRL_PWRDN              0x0800
+#define BCM5222_CTRL_ISOLATE            0x0400
+#define BCM5222_CTRL_RESTART            0x0200
+#define BCM5222_CTRL_DUPLEX             0x0100
+#define BCM5222_CTRL_COLLEN             0x0080
+
+/* STATUS Bits */
+#define BCM5222_STATUS_100T4            0x8000
+#define BCM5222_STATUS_100TXFDX         0x4000
+#define BCM5222_STATUS_100TX            0x2000
+#define BCM5222_STATUS_10FDX            0x1000
+#define BCM5222_STATUS_10               0x0800
+#define BCM5222_STATUS_MF_PREAMBLE      0x0040
+#define BCM5222_STATUS_AN_COMPLETE      0x0020
+#define BCM5222_STATUS_REMOTE_FAULT     0x0010
+#define BCM5222_STATUS_AN_CAPABLE       0x0008
+#define BCM5222_STATUS_LINK             0x0004
+#define BCM5222_STATUS_JABBER           0x0002
+#define BCM5222_STATUS_EXT_CAP          0x0001
+
+/* ID Values */
+#define BCM5222_ID_HIGH_VAL             0x0040
+#define BCM5222_ID_LOW_VAL              0x6320
+
+/* Advertise Bits */
+#define BCM5222_AN_ADV_NEXTPG           0x8000
+#define BCM5222_AN_ADV_REMOTE_FAULT     0x2000
+#define BCM5222_AN_ADV_PAUSE            0x0400
+#define BCM5222_AN_ADV_100T4            0x0200
+#define BCM5222_AN_ADV_100TXFDX         0x0100
+#define BCM5222_AN_ADV_100TX            0x0080
+#define BCM5222_AN_ADV_10FDX            0x0040
+#define BCM5222_AN_ADV_10               0x0020
+#define BCM5222_AN_ADV_8023             0x0001
+#define BCM5222_AN_ADV_ALL              \
+	(BCM5222_AN_ADV_100TXFDX | \
+	BCM5222_AN_ADV_100TXFDX | \
+	BCM5222_AN_ADV_100TX | \
+	BCM5222_AN_ADV_10FDX | \
+	BCM5222_AN_ADV_10 |    \
+	BCM5222_AN_ADV_8023)
+
+/* AUX CTRL/STATUS Bits */
+#define BCM5222_AUX_CS_JABBER_DIS       0x8000
+#define BCM5222_AUX_CS_FORCE_LINK       0x4000
+#define BCM5222_AUX_CS_10M_TX_PWR       0x0100
+#define BCM5222_AUX_CS_HSQ_LSQ_MASK     0x00c0
+#define BCM5222_AUX_CS_EDGE_RATE_MASK   0x0030
+#define BCM5222_AUX_CS_AN_IND           0x0008
+#define BCM5222_AUX_CS_SPEED_FORCE      0x0004
+#define BCM5222_AUX_CS_SPEED            0x0002
+#define BCM5222_AUX_CS_DUPLEX           0x0001
+
+/* AUX STATUS Bits */
+#define BCM5222_AUX_STATUS_AN_COMP      0x8000
+#define BCM5222_AUX_STATUS_AN_COMPACK   0x4000
+#define BCM5222_AUX_STATUS_AN_ACKDET    0x2000
+#define BCM5222_AUX_STATUS_AN_ABDET     0x1000
+#define BCM5222_AUX_STATUS_AN_PAUSE     0x0800
+#define BCM5222_AUX_STATUS_AN_HCDMASK   0x0700
+#define BCM5222_AUX_STATUS_AN_PDFAULT   0x0080
+#define BCM5222_AUX_STATUS_LP_RMTFAULT  0x0040
+#define BCM5222_AUX_STATUS_LP_PGRX      0x0020
+#define BCM5222_AUX_STATUS_LP_NEGABLE   0x0010
+#define BCM5222_AUX_STATUS_SPEED        0x0008
+#define BCM5222_AUX_STATUS_LINK         0x0004
+#define BCM5222_AUX_STATUS_AN_EN        0x0002
+#define BCM5222_AUX_STATUS_JABBER       0x0001
+
+static int bcm5222_config_intr(struct phy_device *phydev)
+{
+	int err = 0;
+	printk(KERN_INFO "%s PHY_INTERRUPT %x\n",
+			__func__, phydev->interrupts);
+
+	return err;
+}
+
+static int bcm5222_ack_interrupt(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int bcm5222_config_init(struct phy_device *phydev)
+{
+	return  bcm5222_ack_interrupt(phydev);
+}
+
+static struct phy_driver bcm5222_driver = {
+	.phy_id = BCM5222_PHY_ID,
+	.phy_id_mask = 0xfffffff0,
+	.name = "Broadcom BCM5222",
+	.features = PHY_BASIC_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_init = bcm5222_config_init,
+	.config_aneg = genphy_config_aneg,
+	.read_status = genphy_read_status,
+	.ack_interrupt = bcm5222_ack_interrupt,
+	.config_intr = bcm5222_config_intr,
+	.driver = {.owner = THIS_MODULE,}
+};
+
+static int __init bcm5222_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&bcm5222_driver);
+	if (ret)
+		goto err1;
+
+	return 0;
+err1:
+	printk(KERN_INFO "register bcm5222 PHY driver fail\n");
+	return ret;
+}
+
+static void __exit bcm5222_exit(void)
+{
+	phy_driver_unregister(&bcm5222_driver);
+}
+
+MODULE_DESCRIPTION("Broadcom PHY driver");
+MODULE_LICENSE("GPL v2");
+
+module_init(bcm5222_init);
+module_exit(bcm5222_exit);
--- /dev/null
+++ b/drivers/net/phy/national836x.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *	Chenghu Wu <b16972@freescale.com>
+ *
+ * Driver for National Semiconductor PHYs 83640
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+/* DP83640 phy identifier values */
+#define DP83640_PHY_ID	0x20005ce0
+
+/* PHY Status Register */
+#define MII_DP83640_PHYSTST            16
+/* Interrupt Control Register */
+#define MII_DP83640_ICR                17
+/* Interrupt Status and Interrupt EVEN Enable Register */
+#define MII_DP83640_ISR                18
+
+#define MII_DP83640_ICR_IRQEVEN_EN      0x0001
+#define MII_DP83640_ICR_IRQOUTPUT_EN    0x0002
+#define MII_DP83640_ISR_ENERGY_EVEN     0x0040
+#define MII_DP83640_ISR_LINKSTATUS_EVEN 0x0020
+
+static int ns_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = phy_write(phydev, MII_DP83640_ICR,
+				MII_DP83640_ICR_IRQEVEN_EN |
+				MII_DP83640_ICR_IRQOUTPUT_EN);
+		err = phy_write(phydev, MII_DP83640_ICR,
+				MII_DP83640_ISR_ENERGY_EVEN |
+				MII_DP83640_ISR_LINKSTATUS_EVEN);
+	} else {
+		err = phy_write(phydev, MII_DP83640_ICR, 0);
+	}
+	return err;
+}
+
+static int ns83640_ack_interrupt(struct phy_device *phydev)
+{
+	int ret = phy_read(phydev, MII_DP83640_ISR);
+	if (ret < 0) {
+		printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
+			__func__, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int ns83640_config_init(struct phy_device *phydev)
+{
+	int ret = phy_read(phydev, MII_DP83640_PHYSTST);
+	if (ret < 0) {
+		printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
+			__func__, ret);
+	}
+
+	return ns83640_ack_interrupt(phydev);
+}
+
+static struct phy_driver dp83640_driver = {
+	.phy_id = DP83640_PHY_ID,
+	.phy_id_mask = 0xfffffff0,
+	.name = "NatSemi DP83640",
+	.features = PHY_BASIC_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_init = ns83640_config_init,
+	.config_aneg = genphy_config_aneg,
+	.read_status = genphy_read_status,
+	.ack_interrupt = ns83640_ack_interrupt,
+	.config_intr = ns_config_intr,
+	.driver = {.owner = THIS_MODULE,}
+};
+
+static int __init ns83640_init(void)
+{
+	return phy_driver_register(&dp83640_driver);
+}
+
+static void __exit ns83640_exit(void)
+{
+	phy_driver_unregister(&dp83640_driver);
+}
+
+MODULE_DESCRIPTION("NatSemi PHY driver");
+MODULE_AUTHOR("Chenghu Wu <b16972@freescale.com>");
+MODULE_LICENSE("GPL v2");
+
+module_init(ns83640_init);
+module_exit(ns83640_exit);
--- /dev/null
+++ b/drivers/net/phy/national8384x.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *	Chenghu Wu <b16972@freescale.com>
+ *
+ * Driver for National Semiconductor PHYs 8384x
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+/* DP8384x phy identifier values */
+#define DP83848_PHY_ID	0x20005c90
+#define DP83849_PHY_ID  0x20005ca0
+/* PHY Status Register */
+#define MII_DP8384X_PHYSTST            16
+
+static int ns8384x_config_intr(struct phy_device *phydev)
+{
+	int err = 0;
+
+	return err;
+}
+
+static int ns8384x_ack_interrupt(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int ns8384x_config_init(struct phy_device *phydev)
+{
+	int ret = phy_read(phydev, MII_DP8384X_PHYSTST);
+	if (ret < 0) {
+		printk(KERN_INFO "%s MII_DP83640_ISR %x\n",
+			__func__, ret);
+	}
+
+	return ns8384x_ack_interrupt(phydev);
+}
+
+static struct phy_driver dp83848_driver = {
+	.phy_id = DP83848_PHY_ID,
+	.phy_id_mask = 0xfffffff0,
+	.name = "NatSemi DP83848",
+	.features = PHY_BASIC_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_init = ns8384x_config_init,
+	.config_aneg = genphy_config_aneg,
+	.read_status = genphy_read_status,
+	.ack_interrupt = ns8384x_ack_interrupt,
+	.config_intr = ns8384x_config_intr,
+	.driver = {.owner = THIS_MODULE,}
+};
+
+static struct phy_driver dp83849_driver = {
+	.phy_id = DP83849_PHY_ID,
+	.phy_id_mask = 0xfffffff0,
+	.name = "NatSemi DP83849",
+	.features = PHY_BASIC_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_init = ns8384x_config_init,
+	.config_aneg = genphy_config_aneg,
+	.read_status = genphy_read_status,
+	.ack_interrupt = ns8384x_ack_interrupt,
+	.config_intr = ns8384x_config_intr,
+	.driver = {.owner = THIS_MODULE,}
+};
+
+static int __init ns8384x_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&dp83848_driver);
+	if (ret)
+		goto err1;
+
+	ret = phy_driver_register(&dp83849_driver);
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	printk(KERN_INFO "register dp83849 PHY driver fail\n");
+	phy_driver_unregister(&dp83848_driver);
+err1:
+	printk(KERN_INFO "register dp83848 PHY driver fail\n");
+	return ret;
+}
+
+static void __exit ns8384x_exit(void)
+{
+	phy_driver_unregister(&dp83848_driver);
+	phy_driver_unregister(&dp83849_driver);
+}
+
+MODULE_DESCRIPTION("NatSemi PHY driver");
+MODULE_AUTHOR("Chenghu Wu <b16972@freescale.com>");
+MODULE_LICENSE("GPL v2");
+
+module_init(ns8384x_init);
+module_exit(ns8384x_exit);