/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include "qcom-ipq4019.dtsi"
#include "qcom-ipq4019-bus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	model = "OpenMesh A62";
	compatible = "openmesh,a62", "qcom,ipq4019";

	soc {
		mdio@90000 {
			status = "okay";
		};

		ess-psgmii@98000 {
			status = "okay";
		};

		tcsr@194b000 {
			/* select hostmode */
			compatible = "qcom,tcsr";
			reg = <0x194b000 0x100>;
			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
			status = "okay";
		};

		tcsr@1949000 {
			compatible = "qcom,tcsr";
			reg = <0x1949000 0x100>;
			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
		};

		ess_tcsr@1953000 {
			compatible = "qcom,tcsr";
			reg = <0x1953000 0x1000>;
			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
		};

		tcsr@1957000 {
			compatible = "qcom,tcsr";
			reg = <0x1957000 0x100>;
			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
		};

		usb2: usb2@60f8800 {
			status = "okay";
		};

		serial@78af000 {
			pinctrl-0 = <&serial_pins>;
			pinctrl-names = "default";
			status = "okay";
		};

		crypto@8e3a000 {
			status = "okay";
		};

		watchdog@b017000 {
			status = "okay";
		};

		ess-switch@c000000 {
			switch_lan_bmp = <0x10>;
			switch_wan_bmp = <0x20>;

			status = "okay";
		};

		edma@c080000 {
			status = "okay";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART >;
		};
	};

	aliases {
		led-boot = &power;
		led-failsafe = &power;
		led-running = &power;
		led-upgrade = &power;
	};

	gpio-leds {
		compatible = "gpio-leds";

		red {
			label = "a62:red:status";
			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "default-off";
		};

		power: green {
			label = "a62:green:status";
			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
		};

		blue {
			label = "a62:blue:status";
			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "default-off";
		};
	};

	watchdog {
		compatible = "linux,wdt-gpio";
		gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
		hw_algo = "toggle";
		/* hw_margin_ms is actually 300s but driver limits it to 60s */
		hw_margin_ms = <60000>;
		always-running;
	};
};

&tlmm {
	serial_pins: serial_pinmux {
		mux {
			pins = "gpio16", "gpio17";
			function = "blsp_uart0";
			bias-disable;
		};
	};

	spi_0_pins: spi_0_pinmux {
		pin {
			function = "blsp_spi0";
			pins = "gpio13", "gpio14", "gpio15";
			drive-strength = <12>;
			bias-disable;
		};
		pin_cs {
			function = "gpio";
			pins = "gpio12";
			drive-strength = <2>;
			bias-disable;
			output-high;
		};
	};

	enable-usb-power {
		gpio-hog;
		gpios = <58 GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "enable USB2 power";
	};
};

&blsp_dma {
	status = "okay";
};

&spi_0 {
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	status = "okay";
	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <24000000>;
		/* partitions are passed via bootloader */
	};
};

&cryptobam {
	status = "okay";
};

&gmac0 {
	qcom,phy_mdio_addr = <3>;
	qcom,poll_required = <1>;
	qcom,forced_speed = <1000>;
	qcom,forced_duplex = <1>;
	vlan_tag = <1 0x10>;
};

&usb2_hs_phy {
	status = "okay";
};

&pcie0 {
	status = "okay";
	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;

	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";

		ath10k@0,0 {
			compatible = "qcom,ath10k";
			status = "okay";
			reg = <0 0 0 0 0>;
			device_type = "pci";
			qcom,ath10k-calibration-variant = "OM-A62";
		};
	};
};

&wifi0 {
	status = "okay";
	qcom,ath10k-calibration-variant = "OM-A62";
};

&wifi1 {
	status = "okay";
	qcom,ath10k-calibration-variant = "OM-A62";
};