/target/linux/ipq806x/patches-3.18/
../
001-spi-qup-Add-DMA-capabilities.patch
002-v3-spi-qup-Fix-incorrect-block-transfers.patch
003-spi-qup-Ensure-done-detection.patch
011-watchdog-qcom-use-timer-devicetree-binding.patch
012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch
013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
020-add-ap148-bootargs.patch
021-add-ap148-partitions.patch
022-add-db149-dts.patch
023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
024-ap148-add-memory-node.patch
100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch
103-ARM-DT-ipq8064-Add-TCSR-support.patch
110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
114-pcie-add-ctlr-init.patch
115-add-pcie-aux-clk-dts.patch
120-mfd-qcom-rpm-Driver-for-the-Qualcomm-RPM.patch
121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch
122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch
123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch
124-regulator-rpm-add-support-for-RPM-controller-SMB208.patch
125-regulator-qcom-rpm-Add-missing-state-flag-in-call-to.patch
126-add-rpm-to-ipq8064-dts.patch
130-clk_mux-Fix-set_parent-doing-the-wrong-thing-when-IN.patch
131-clk-Add-__clk_mux_determine_rate_closest.patch
132-clk-Add-clk_unregister_-divider-gate-mux-to-close-me.patch
133-ARM-Add-Krait-L2-register-accessor-functions.patch
134-clk-mux-Split-out-register-accessors-for-reuse.patch
135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
136-clk-Add-safe-switch-hook.patch
137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
138-clk-qcom-Add-HFPLL-driver.patch
139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
140-clk-qcom-Add-support-for-Krait-clocks.patch
141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
142-clk-qcom-Add-Krait-clock-controller-driver.patch
143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch
150-dmaengine-Rework-dma_chan_get.patch
151-dmaengine-Remove-the-need-to-declare-device_control.patch
152-dmaengine-Make-channel-allocation-callbacks-optional.patch
153-dmaengine-Introduce-a-device_config-callback.patch
154-dmaengine-Add-device_terminate_all-callback.patch
155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
156-dmaengine-Add-ADM-driver.patch
157-ARM-DT-ipq8064-Add-ADM-device-node.patch
160-clk-qcom-Add-EBI2-clocks-for-IPQ806x.patch
161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
162-mtd-nand-Qualcomm-NAND-controller-driver.patch
163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch
701-stmmac-add-phy-handle-support-to-the-platform-layer.patch
702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch
703-stmmac-add-fixed-link-device-tree-support.patch
704-stmmac-add-ipq806x-glue-layer.patch
705-net-stmmac-ipq806x-document-device-tree-bindings.patch
706-net-stmmac-create-one-debugfs-dir-per-net-device.patch
707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch