From 05be818061b9f2a0fa5ad0cde6881917ff14a2f2 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 6 Jan 2016 21:55:10 +0100 Subject: [PATCH 024/102] dt-bindings: add MediaTek PCIe binding documentation Signed-off-by: John Crispin --- .../devicetree/bindings/pci/mediatek-pcie.txt | 140 ++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt new file mode 100644 index 0000000..8fea3ed --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -0,0 +1,140 @@ +Mediatek PCIe controller + +Required properties: +- compatible: Should be one of: + - "mediatek,mt2701-pcie" + - "mediatek,mt7623-pcie" +- device_type: Must be "pci" +- reg: A list of physical base address and length for each set of controller + registers. A list of register ranges to use. Must contain an + entry for each entry in the reg-names property. +- reg-names: Must include the following entries: + "pcie": PCIe registers + "pcie phy0": PCIe PHY0 registers + "pcie phy1": PCIe PHY0 registers + "pcie phy2": PCIe PHY0 registers +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "pcie0": The interrupt that is asserted for port0 + "pcie1": The interrupt that is asserted for port1 + "pcie2": The interrupt that is asserted for port2 +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 6 cells each. + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- #interrupt-cells: Size representation for interrupts (must be 1) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - pcie0 + - pcie1 + - pcie2 +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pcie0 + - pcie1 + - pcie2 +- mediatek,hifsys: Must contain a phandle to the HIFSYS syscon range. +Root ports are defined as subnodes of the PCIe controller node. + +Required properties: +- device_type: Must be "pci" +- assigned-addresses: Address and size of the port configuration registers +- reg: PCI bus address of the root port +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. + +Example: + +SoC DTSI: + + hifsys: clock-controller@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x8000>, /* PCI-Express registers */ + <0 0x1a149000 0 0x1000>, /* PCI-Express PHY0 */ + <0 0x1a14a000 0 0x1000>, /* PCI-Express PHY1 */ + <0 0x1a244000 0 0x1000>; /* PCI-Express PHY2 */ + reg-names = "pcie", "pcie phy0", "pcie phy1", "pcie phy2"; + interrupts = , + , + ; + interrupt-names = "pcie0", "pcie1", "pcie2"; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "pcie"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie0", "pice1", "pcie2"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + mediatek,hifsys = <&hifsys>; + + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* io space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* pci memory */ + + status = "disabled"; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + pcie@2,0{ + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + pcie@3,0{ + device_type = "pci"; + reg = <0x1800 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + }; + +Board DTS: + + pcie-controller { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + }; -- 1.7.10.4