From 44ad702902e9e274f57edce8944e46540b978f9a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 19 Dec 2013 09:30:57 -0300 Subject: [PATCH 186/203] of/irq: Refactor interrupt-map parsing All the users of of_irq_parse_raw pass in a raw interrupt specifier from the device tree and expect it to be returned (possibly modified) in an of_phandle_args structure. However, the primary function of of_irq_parse_raw() is to check for translations due to the presence of one or more interrupt-map properties. The actual placing of the data into an of_phandle_args structure is trivial. If it is refactored to accept an of_phandle_args structure directly, then it becomes possible to consume of_phandle_args from other sources. This is important for an upcoming patch that allows a device to be connected to more than one interrupt parent. It also simplifies the code a bit. The biggest complication with this patch is that the old version works on the interrupt specifiers in __be32 form, but the of_phandle_args structure is intended to carry it in the cpu-native version. A bit of churn was required to make this work. In the end it results in tighter code, so the churn is worth it. Signed-off-by: Grant Likely Acked-by: Tony Lindgren Cc: Benjamin Herrenschmidt --- arch/powerpc/platforms/fsl_uli1575.c | 6 +- drivers/of/irq.c | 108 ++++++++++++++++++----------------- drivers/of/of_pci_irq.c | 7 ++- include/linux/of_irq.h | 5 +- 4 files changed, 67 insertions(+), 59 deletions(-) --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -322,7 +322,6 @@ static void hpcd_final_uli5288(struct pc struct pci_controller *hose = pci_bus_to_host(dev->bus); struct device_node *hosenode = hose ? hose->dn : NULL; struct of_phandle_args oirq; - int pin = 2; u32 laddr[3]; if (!machine_is(mpc86xx_hpcd)) @@ -331,9 +330,12 @@ static void hpcd_final_uli5288(struct pc if (!hosenode) return; + oirq.np = hosenode; + oirq.args[0] = 2; + oirq.args_count = 1; laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); laddr[1] = laddr[2] = 0; - of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq); + of_irq_parse_raw(laddr, &oirq); dev->irq = irq_create_of_mapping(&oirq); } --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -80,31 +80,32 @@ struct device_node *of_irq_find_parent(s /** * of_irq_parse_raw - Low level interrupt tree parsing * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function + * @addr: address specifier (start of "reg" property of the device) in be32 format + * @out_irq: structure of_irq updated by this function * * Returns 0 on success and a negative number on error * * This function is a low-level interrupt tree walking function. It * can be used to do a partial walk with synthetized reg and interrupts * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. + * node exist for the parent. It takes an interrupt specifier structure as + * input, walks the tree looking for any interrupt-map properties, translates + * the specifier for each map, and then returns the translated map. */ -int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, - u32 ointsize, const __be32 *addr, struct of_phandle_args *out_irq) +int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) { struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; - const __be32 *tmp, *imap, *imask; + __be32 initial_match_array[8]; + const __be32 *match_array = initial_match_array; + const __be32 *tmp, *imap, *imask, dummy_imask[] = { ~0, ~0, ~0, ~0, ~0 }; u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; int imaplen, match, i; pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", - of_node_full_name(parent), be32_to_cpup(intspec), - be32_to_cpup(intspec + 1), ointsize); + of_node_full_name(out_irq->np), out_irq->args[0], out_irq->args[1], + out_irq->args_count); - ipar = of_node_get(parent); + ipar = of_node_get(out_irq->np); /* First get the #interrupt-cells property of the current cursor * that tells us how to interpret the passed-in intspec. If there @@ -127,7 +128,7 @@ int of_irq_parse_raw(struct device_node pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); - if (ointsize != intsize) + if (out_irq->args_count != intsize) return -EINVAL; /* Look for this #address-cells. We have to implement the old linux @@ -146,6 +147,21 @@ int of_irq_parse_raw(struct device_node pr_debug(" -> addrsize=%d\n", addrsize); + /* If we were passed no "reg" property and we attempt to parse + * an interrupt-map, then #address-cells must be 0. + * Fail if it's not. + */ + if (addr == NULL && addrsize != 0) { + pr_debug(" -> no reg passed in when needed !\n"); + return -EINVAL; + } + + /* Precalculate the match array - this simplifies match loop */ + for (i = 0; i < addrsize; i++) + initial_match_array[i] = addr[i]; + for (i = 0; i < intsize; i++) + initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]); + /* Now start the actual "proper" walk of the interrupt tree */ while (ipar != NULL) { /* Now check if cursor is an interrupt-controller and if it is @@ -154,11 +170,6 @@ int of_irq_parse_raw(struct device_node if (of_get_property(ipar, "interrupt-controller", NULL) != NULL) { pr_debug(" -> got it !\n"); - for (i = 0; i < intsize; i++) - out_irq->args[i] = - of_read_number(intspec +i, 1); - out_irq->args_count = intsize; - out_irq->np = ipar; of_node_put(old); return 0; } @@ -175,34 +186,16 @@ int of_irq_parse_raw(struct device_node /* Look for a mask */ imask = of_get_property(ipar, "interrupt-map-mask", NULL); - - /* If we were passed no "reg" property and we attempt to parse - * an interrupt-map, then #address-cells must be 0. - * Fail if it's not. - */ - if (addr == NULL && addrsize != 0) { - pr_debug(" -> no reg passed in when needed !\n"); - goto fail; - } + if (!imask) + imask = dummy_imask; /* Parse interrupt-map */ match = 0; while (imaplen > (addrsize + intsize + 1) && !match) { /* Compare specifiers */ match = 1; - for (i = 0; i < addrsize && match; ++i) { - __be32 mask = imask ? imask[i] - : cpu_to_be32(0xffffffffu); - match = ((addr[i] ^ imap[i]) & mask) == 0; - } - for (; i < (addrsize + intsize) && match; ++i) { - __be32 mask = imask ? imask[i] - : cpu_to_be32(0xffffffffu); - match = - ((intspec[i-addrsize] ^ imap[i]) & mask) == 0; - } - imap += addrsize + intsize; - imaplen -= addrsize + intsize; + for (i = 0; i < (addrsize + intsize); i++, imaplen--) + match = !((match_array[i] ^ *imap++) & imask[i]); pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); @@ -247,12 +240,18 @@ int of_irq_parse_raw(struct device_node if (!match) goto fail; - of_node_put(old); - old = of_node_get(newpar); + /* + * Successfully parsed an interrrupt-map translation; copy new + * interrupt specifier into the out_irq structure + */ + of_node_put(out_irq->np); + out_irq->np = of_node_get(newpar); + + match_array = imap - newaddrsize - newintsize; + for (i = 0; i < newintsize; i++) + out_irq->args[i] = be32_to_cpup(imap - newintsize + i); + out_irq->args_count = intsize = newintsize; addrsize = newaddrsize; - intsize = newintsize; - intspec = imap - intsize; - addr = intspec - addrsize; skiplevel: /* Iterate again with new parent */ @@ -263,7 +262,7 @@ int of_irq_parse_raw(struct device_node } fail: of_node_put(ipar); - of_node_put(old); + of_node_put(out_irq->np); of_node_put(newpar); return -EINVAL; @@ -276,15 +275,16 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw); * @index: index of the interrupt to resolve * @out_irq: structure of_irq filled by this function * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_parse_raw(). + * This function resolves an interrupt for a node by walking the interrupt tree, + * finding which interrupt controller node it is attached to, and returning the + * interrupt specifier that can be used to retrieve a Linux IRQ number. */ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq) { struct device_node *p; const __be32 *intspec, *tmp, *addr; u32 intsize, intlen; - int res = -EINVAL; + int i, res = -EINVAL; pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index); @@ -326,9 +326,15 @@ int of_irq_parse_one(struct device_node if ((index + 1) * intsize > intlen) goto out; - /* Get new specifier and map it */ - res = of_irq_parse_raw(p, intspec + index * intsize, intsize, - addr, out_irq); + /* Copy intspec into irq structure */ + intspec += index * intsize; + out_irq->np = p; + out_irq->args_count = intsize; + for (i = 0; i < intsize; i++) + out_irq->args[i] = be32_to_cpup(intspec++); + + /* Check if there are any interrupt-map translations to process */ + res = of_irq_parse_raw(addr, out_irq); out: of_node_put(p); return res; --- a/drivers/of/of_pci_irq.c +++ b/drivers/of/of_pci_irq.c @@ -85,9 +85,12 @@ int of_irq_parse_pci(const struct pci_de pdev = ppdev; } + out_irq->np = ppnode; + out_irq->args_count = 1; + out_irq->args[0] = lspec; lspec_be = cpu_to_be32(lspec); laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); - laddr[1] = laddr[2] = cpu_to_be32(0); - return of_irq_parse_raw(ppnode, &lspec_be, 1, laddr, out_irq); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_parse_raw(laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_parse_pci); --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -31,10 +31,7 @@ static inline int of_irq_parse_oldworld( } #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ - -extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, - u32 ointsize, const __be32 *addr, - struct of_phandle_args *out_irq); +extern int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq); extern int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq); extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data);