From d587c866f34aa8e59ddc3628969113e725e36eab Mon Sep 17 00:00:00 2001
From: Lior Amsalem <alior@marvell.com>
Date: Mon, 23 Dec 2013 13:07:35 +0100
Subject: [PATCH 196/203] ata: sata_mv: setting PHY speed according to SControl
 speed

This patch fixes a SATA hotplug issue on the Armada 370 and Armada XP
SoCs. Without it, if a disk is unplugged from a SATA port, then further
hotplug notification are now longer received on this port.

This should be applied to every -stable kernel supporting Armada SoCs.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: stable@vger.kernel.org
---
 drivers/ata/sata_mv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -304,6 +304,7 @@ enum {
 	MV5_LTMODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
 	SATA_IFCFG		= 0x050,
+	LP_PHY_CTL		= 0x058,
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
@@ -1353,6 +1354,7 @@ static int mv_scr_write(struct ata_link
 
 	if (ofs != 0xffffffffU) {
 		void __iomem *addr = mv_ap_base(link->ap) + ofs;
+		void __iomem *lp_phy_addr = mv_ap_base(link->ap) + LP_PHY_CTL;
 		if (sc_reg_in == SCR_CONTROL) {
 			/*
 			 * Workaround for 88SX60x1 FEr SATA#26:
@@ -1369,6 +1371,14 @@ static int mv_scr_write(struct ata_link
 			 */
 			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
 				val |= 0xf000;
+
+			/*
+			 * Setting PHY speed according to SControl speed
+			 */
+			if ((val & 0xf0) == 0x10)
+				writelfl(0x7, lp_phy_addr);
+			else
+				writelfl(0x227, lp_phy_addr);
 		}
 		writelfl(val, addr);
 		return 0;