From 33b0123664b627005728cfe7b1967b790392ceec Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 14 Dec 2013 17:20:13 +0100 Subject: [PATCH] ARM: sunxi: fix sun5i-a13 port F multiplexing The correct value for selecting the mmc0 function on port F pins is 2 not 4, as per the data-sheet: http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf Signed-off-by: Hans de Goede Acked-by: Maxime Ripard --- drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h index 2c7446a..7c1b05e 100644 --- a/drivers/pinctrl/pinctrl-sunxi-pins.h +++ b/drivers/pinctrl/pinctrl-sunxi-pins.h @@ -1932,27 +1932,27 @@ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */ + SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */ + SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */ + SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */ + SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */ + SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5, SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */ + SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */ /* Hole */ SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0, SUNXI_FUNCTION(0x0, "gpio_in"), -- 1.8.5.1