From 154a670a945c54300749d5ba008f30bbd6089017 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 27 Jan 2014 16:41:18 +0200 Subject: [PATCH] ata: ahci_platform: Manage SATA PHY Some platforms have a PHY hooked up to the SATA controller. The PHY needs to be initialized and powered up for SATA to work. We do that using the PHY framework. CC: Balaji T K Signed-off-by: Roger Quadros Signed-off-by: Hans de Goede --- drivers/ata/ahci.h | 2 ++ drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 47 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index bf8100c..3ab7ac9 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -37,6 +37,7 @@ #include #include +#include #include /* Enclosure Management Control */ @@ -325,6 +326,7 @@ struct ahci_host_priv { u32 em_msg_type; /* EM message type */ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ struct regulator *target_pwr; /* Optional */ + struct phy *phy; /* If platform uses phy */ void *plat_data; /* Other platform data */ /* * Optional ahci_start_engine override, if not set this gets set to the diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index d7e55ba..99d38c1 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "ahci.h" static void ahci_host_stop(struct ata_host *host); @@ -147,6 +148,7 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) * the following order: * 1) Regulator * 2) Clocks (through ahci_platform_enable_clks) + * 3) Phy * * If resource enabling fails at any point the previous enabled * resources are disabled in reverse order. @@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) if (rc) goto disable_regulator; + if (hpriv->phy) { + rc = phy_init(hpriv->phy); + if (rc) + goto disable_clks; + + rc = phy_power_on(hpriv->phy); + if (rc) { + phy_exit(hpriv->phy); + goto disable_clks; + } + } + return 0; +disable_clks: + ahci_platform_disable_clks(hpriv); + disable_regulator: if (hpriv->target_pwr) regulator_disable(hpriv->target_pwr); @@ -186,14 +203,20 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) * * This function disables all ahci_platform managed resources in * the following order: - * 1) Clocks (through ahci_platform_disable_clks) - * 2) Regulator + * 1) Phy + * 2) Clocks (through ahci_platform_disable_clks) + * 3) Regulator * * LOCKING: * None. */ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { + if (hpriv->phy) { + phy_power_off(hpriv->phy); + phy_exit(hpriv->phy); + } + ahci_platform_disable_clks(hpriv); if (hpriv->target_pwr) @@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res) * 2) regulator for controlling the targets power (optional) * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, * or for non devicetree enabled platforms a single clock + * 4) phy (optional) * * LOCKING: * None. @@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources( hpriv->clks[i] = clk; } + hpriv->phy = devm_phy_get(dev, "sata-phy"); + if (IS_ERR(hpriv->phy)) { + rc = PTR_ERR(hpriv->phy); + switch (rc) { + case -ENODEV: + case -ENOSYS: + /* continue normally */ + hpriv->phy = NULL; + break; + + case -EPROBE_DEFER: + goto err_out; + + default: + dev_err(dev, "couldn't get sata-phy\n"); + goto err_out; + } + } + devres_remove_group(dev, NULL); return hpriv; -- 1.8.5.5