path: root/openwrt/target/linux/linux-2.4/patches/brcm/001-bcm47xx.patch

diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
--- linux.old/arch/mips/Makefile	2005-11-07 23:12:50.582887000 +0100
+++ linux.dev/arch/mips/Makefile	2005-11-07 21:57:08.537629000 +0100
@@ -727,6 +727,19 @@
 endif
 
 #
+# Broadcom BCM947XX variants
+#
+ifdef CONFIG_BCM947XX
+LIBS		+= arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o 
+SUBDIRS		+= arch/mips/bcm947xx/generic arch/mips/bcm947xx 
+LOADADDR	:= 0x80001000
+
+zImage: vmlinux
+	$(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
+export LOADADDR
+endif
+
+#
 # Choosing incompatible machines durings configuration will result in
 # error messages during linking.  Select a default linkscript if
 # none has been choosen above.
@@ -779,6 +793,7 @@
 	$(MAKE) -C arch/$(ARCH)/tools clean
 	$(MAKE) -C arch/mips/baget clean
 	$(MAKE) -C arch/mips/lasat clean
+	$(MAKE) -C arch/mips/bcm947xx/compressed clean
 
 archmrproper:
 	@$(MAKEBOOT) mrproper
diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
--- linux.old/arch/mips/bcm947xx/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/Makefile	2005-11-08 00:55:04.392074500 +0100
@@ -0,0 +1,15 @@
+#
+# Makefile for the BCM947xx specific kernel interface routines
+# under Linux.
+#
+
+EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
+
+O_TARGET        := bcm947xx.o
+
+export-objs     := nvram_linux.o setup.o
+obj-y		:= prom.o setup.o time.o sbmips.o gpio.o
+obj-y		+= nvram.o nvram_linux.o sflash.o
+obj-$(CONFIG_PCI) += sbpci.o pcibios.o
+
+include $(TOPDIR)/Rules.make
diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile
--- linux.old/arch/mips/bcm947xx/compressed/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/compressed/Makefile	2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,33 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $
+#
+
+OBJCOPY_ARGS	= -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+SYSTEM		?= $(TOPDIR)/vmlinux
+
+all: vmlinuz
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+# Create a gzipped version named vmlinuz for compatibility
+vmlinuz: piggy
+	gzip -c9 $< > $@
+
+piggy: $(SYSTEM)
+	$(OBJCOPY) $(OBJCOPY_ARGS) $< $@
+
+mrproper: clean
+
+clean:
+	rm -f vmlinuz piggy
diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile
--- linux.old/arch/mips/bcm947xx/generic/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/generic/Makefile	2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,15 @@
+#
+# Makefile for the BCM947xx specific kernel interface routines
+# under Linux.
+#
+
+.S.s:
+	$(CPP) $(AFLAGS) $< -o $*.s
+.S.o:
+	$(CC) $(AFLAGS) -c $< -o $*.o
+
+O_TARGET        := brcm.o
+
+obj-y	:= int-handler.o irq.o
+
+include $(TOPDIR)/Rules.make
diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S
--- linux.old/arch/mips/bcm947xx/generic/int-handler.S	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S	2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,51 @@
+/*
+ * Generic interrupt handler for Broadcom MIPS boards
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware
+ *             4        Hardware
+ *             5        Hardware
+ *             6        Hardware
+ *             7        R4k timer
+ */
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+	NESTED(brcmIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+    .set    noreorder
+
+	jal	    brcm_irq_dispatch
+	 move	a0, sp
+
+	j	    ret_from_irq
+	 nop
+		
+	END(brcmIRQ)
diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c
--- linux.old/arch/mips/bcm947xx/generic/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/generic/irq.c	2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,130 @@
+/*
+ * Generic interrupt control functions for Broadcom MIPS boards
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
+
+extern asmlinkage void brcmIRQ(void);
+extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
+
+void
+brcm_irq_dispatch(struct pt_regs *regs)
+{
+	u32 cause;
+
+	cause = read_c0_cause() &
+		read_c0_status() &
+		CAUSEF_IP;
+
+#ifdef CONFIG_KERNPROF
+	change_c0_status(cause | 1, 1);
+#else
+	clear_c0_status(cause);
+#endif
+
+	if (cause & CAUSEF_IP7)
+		do_IRQ(7, regs);
+	if (cause & CAUSEF_IP2)
+		do_IRQ(2, regs);
+	if (cause & CAUSEF_IP3)
+		do_IRQ(3, regs);
+	if (cause & CAUSEF_IP4)
+		do_IRQ(4, regs);
+	if (cause & CAUSEF_IP5)
+		do_IRQ(5, regs);
+	if (cause & CAUSEF_IP6)
+		do_IRQ(6, regs);
+}
+
+static void
+enable_brcm_irq(unsigned int irq)
+{
+	if (irq < 8)
+		set_c0_status(1 << (irq + 8));
+	else
+		set_c0_status(IE_IRQ0);
+}
+
+static void
+disable_brcm_irq(unsigned int irq)
+{
+	if (irq < 8)
+		clear_c0_status(1 << (irq + 8));
+	else
+		clear_c0_status(IE_IRQ0);
+}
+
+static void
+ack_brcm_irq(unsigned int irq)
+{
+	/* Already done in brcm_irq_dispatch */
+}
+
+static unsigned int
+startup_brcm_irq(unsigned int irq)
+{ 
+	enable_brcm_irq(irq);
+
+	return 0; /* never anything pending */
+}
+
+static void
+end_brcm_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_brcm_irq(irq);
+}
+
+static struct hw_interrupt_type brcm_irq_type = {
+	typename: "MIPS",
+	startup: startup_brcm_irq,
+	shutdown: disable_brcm_irq,
+	enable: enable_brcm_irq,
+	disable: disable_brcm_irq,
+	ack: ack_brcm_irq,
+	end: end_brcm_irq,
+	NULL
+};
+
+void __init
+init_IRQ(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].handler = &brcm_irq_type;
+	}
+
+    	set_except_vector(0, brcmIRQ);
+	change_c0_status(ST0_IM, ALLINTS);
+
+#ifdef CONFIG_REMOTE_DEBUG
+	printk("Breaking into debugger...\n");
+	set_debug_traps();
+	breakpoint(); 
+#endif
+}
diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c
--- linux.old/arch/mips/bcm947xx/gpio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/gpio.c	2005-11-07 23:58:34.968754500 +0100
@@ -0,0 +1,158 @@
+/*
+ * GPIO char driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <asm/uaccess.h>
+
+#include <typedefs.h>
+#include <bcmutils.h>
+#include <sbutils.h>
+#include <bcmdevs.h>
+
+static sb_t *gpio_sbh;
+static int gpio_major;
+static devfs_handle_t gpio_dir;
+static struct {
+	char *name;
+	devfs_handle_t handle;
+} gpio_file[] = {
+	{ "in", NULL },
+	{ "out", NULL },
+	{ "outen", NULL },
+	{ "control", NULL }
+};
+
+static int
+gpio_open(struct inode *inode, struct file * file)
+{
+	if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file))
+		return -ENODEV;
+
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file * file)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+static ssize_t
+gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+	u32 val;
+
+	switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
+	case 0:
+		val = sb_gpioin(gpio_sbh);
+		break;
+	case 1:
+		val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+		break;
+	case 2:
+		val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+		break;
+	case 3:
+		val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	if (put_user(val, (u32 *) buf))
+		return -EFAULT;
+
+	return sizeof(val);
+}
+
+static ssize_t
+gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+	u32 val;
+
+	if (get_user(val, (u32 *) buf))
+		return -EFAULT;
+
+	switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
+	case 0:
+		return -EACCES;
+	case 1:
+		sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+		break;
+	case 2:
+		sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+		break;
+	case 3:
+		sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return sizeof(val);
+}
+
+static struct file_operations gpio_fops = {
+	owner:		THIS_MODULE,
+	open:		gpio_open,
+	release:	gpio_release,
+	read:		gpio_read,
+	write:		gpio_write,
+};
+
+static int __init
+gpio_init(void)
+{
+	int i;
+
+	if (!(gpio_sbh = sb_kattach()))
+		return -ENODEV;
+
+	sb_gpiosetcore(gpio_sbh);
+
+	if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0)
+		return gpio_major;
+
+	gpio_dir = devfs_mk_dir(NULL, "gpio", NULL);
+
+	for (i = 0; i < ARRAYSIZE(gpio_file); i++) {
+		gpio_file[i].handle = devfs_register(gpio_dir,
+						     gpio_file[i].name,
+						     DEVFS_FL_DEFAULT, gpio_major, i,
+						     S_IFCHR | S_IRUGO | S_IWUGO,
+						     &gpio_fops, NULL);
+	}
+
+	return 0;
+}
+
+static void __exit
+gpio_exit(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAYSIZE(gpio_file); i++)
+		devfs_unregister(gpio_file[i].handle);
+	devfs_unregister(gpio_dir);
+	devfs_unregister_chrdev(gpio_major, "gpio");
+	sb_detach(gpio_sbh);
+}
+
+module_init(gpio_init);
+module_exit(gpio_exit);
diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h	2005-11-07 22:51:38.772725750 +0100
@@ -0,0 +1,391 @@
+/*
+ * Broadcom device-specific manifest constants.
+ *
+ * Copyright 2005, Broadcom Corporation   
+ * All Rights Reserved.   
+ *    
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
+ * $Id$
+ */
+
+#ifndef	_BCMDEVS_H
+#define	_BCMDEVS_H
+
+
+/* Known PCI vendor Id's */
+#define	VENDOR_EPIGRAM		0xfeda
+#define	VENDOR_BROADCOM		0x14e4
+#define	VENDOR_3COM		0x10b7
+#define	VENDOR_NETGEAR		0x1385
+#define	VENDOR_DIAMOND		0x1092
+#define	VENDOR_DELL		0x1028
+#define	VENDOR_HP		0x0e11
+#define	VENDOR_APPLE		0x106b
+
+/* PCI Device Id's */
+#define	BCM4210_DEVICE_ID	0x1072		/* never used */
+#define	BCM4211_DEVICE_ID	0x4211
+#define	BCM4230_DEVICE_ID	0x1086		/* never used */
+#define	BCM4231_DEVICE_ID	0x4231
+
+#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
+#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
+#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
+#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
+
+#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
+#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
+
+#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
+#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
+
+#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
+#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
+#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
+#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
+#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
+#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
+#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
+#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
+#define	BCM47XX_ROBO_ID		0x4719		/* 47xx/53xx roboswitch core */
+#define	BCM47XX_USB20H_ID	0x471a		/* 47xx usb 2.0 host */
+#define	BCM47XX_USB20D_ID	0x471b		/* 47xx usb 2.0 device */
+
+#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
+
+#define	BCM4610_DEVICE_ID	0x4610		/* 4610 primary function 0 */
+#define	BCM4610_ILINE_ID	0x4611		/* 4610 iline100 */
+#define	BCM4610_V90_ID		0x4612		/* 4610 v90 codec */
+#define	BCM4610_ENET_ID		0x4613		/* 4610 enet */
+#define	BCM4610_EXT_ID		0x4614		/* 4610 external i/f */
+#define	BCM4610_USB_ID		0x4615		/* 4610 usb */
+
+#define	BCM4402_DEVICE_ID	0x4402		/* 4402 primary function 0 */
+#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
+#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
+#define	BCM4401_ENET_ID		0x170c		/* 4401b0 production enet cards */
+
+#define	BCM4301_DEVICE_ID	0x4301		/* 4301 primary function 0 */
+#define	BCM4301_D11B_ID		0x4301		/* 4301 802.11b */
+
+#define	BCM4307_DEVICE_ID	0x4307		/* 4307 primary function 0 */
+#define	BCM4307_V90_ID		0x4305		/* 4307 v90 codec */
+#define	BCM4307_ENET_ID		0x4306		/* 4307 enet */
+#define	BCM4307_D11B_ID		0x4307		/* 4307 802.11b */
+
+#define	BCM4306_DEVICE_ID	0x4306		/* 4306 chipcommon chipid */
+#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
+#define	BCM4306_D11G_ID2	0x4325		
+#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
+#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
+#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
+#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
+
+#define	BCM4309_PKG_ID		1		/* 4309 package id */
+
+#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
+#define	BCM4303_PKG_ID		2		/* 4303 package id */
+
+#define	BCM4310_DEVICE_ID	0x4310		/* 4310 chipcommon chipid */
+#define	BCM4310_D11B_ID		0x4311		/* 4310 802.11b */
+#define	BCM4310_UART_ID		0x4312		/* 4310 uart */
+#define	BCM4310_ENET_ID		0x4313		/* 4310 enet */
+#define	BCM4310_USB_ID		0x4315		/* 4310 usb */
+
+#define	BCMGPRS_UART_ID		0x4333		/* Uart id used by 4306/gprs card */
+#define	BCMGPRS2_UART_ID	0x4344		/* Uart id used by 4306/gprs card */
+
+
+#define	BCM4704_DEVICE_ID	0x4704		/* 4704 chipcommon chipid */
+#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
+
+#define	BCM4317_DEVICE_ID	0x4317		/* 4317 chip common chipid */
+
+#define	BCM4318_DEVICE_ID	0x4318		/* 4318 chip common chipid */
+#define	BCM4318_D11G_ID		0x4318		/* 4318 801.11b/g id */
+#define	BCM4318_D11DUAL_ID	0x4319		/* 4318 801.11a/b/g id */
+#define BCM4318_JTAGM_ID	0x4331		/* 4318 jtagm device id */
+
+#define FPGA_JTAGM_ID		0x4330		/* ??? */
+
+/* Address map */
+#define BCM4710_SDRAM           0x00000000      /* Physical SDRAM */
+#define BCM4710_PCI_MEM         0x08000000      /* Host Mode PCI memory access space (64 MB) */
+#define BCM4710_PCI_CFG         0x0c000000      /* Host Mode PCI configuration space (64 MB) */
+#define BCM4710_PCI_DMA         0x40000000      /* Client Mode PCI memory access space (1 GB) */
+#define BCM4710_SDRAM_SWAPPED   0x10000000      /* Byteswapped Physical SDRAM */
+#define BCM4710_ENUM            0x18000000      /* Beginning of core enumeration space */
+
+/* Core register space */
+#define BCM4710_REG_SDRAM       0x18000000      /* SDRAM core registers */
+#define BCM4710_REG_ILINE20     0x18001000      /* InsideLine20 core registers */
+#define BCM4710_REG_EMAC0       0x18002000      /* Ethernet MAC 0 core registers */
+#define BCM4710_REG_CODEC       0x18003000      /* Codec core registers */
+#define BCM4710_REG_USB         0x18004000      /* USB core registers */
+#define BCM4710_REG_PCI         0x18005000      /* PCI core registers */
+#define BCM4710_REG_MIPS        0x18006000      /* MIPS core registers */
+#define BCM4710_REG_EXTIF       0x18007000      /* External Interface core registers */
+#define BCM4710_REG_EMAC1       0x18008000      /* Ethernet MAC 1 core registers */
+
+#define BCM4710_EXTIF           0x1f000000      /* External Interface base address */
+#define BCM4710_PCMCIA_MEM      0x1f000000      /* External Interface PCMCIA memory access */
+#define BCM4710_PCMCIA_IO       0x1f100000      /* PCMCIA I/O access */
+#define BCM4710_PCMCIA_CONF     0x1f200000      /* PCMCIA configuration */
+#define BCM4710_PROG            0x1f800000      /* Programable interface */
+#define BCM4710_FLASH           0x1fc00000      /* Flash */
+
+#define BCM4710_EJTAG           0xff200000      /* MIPS EJTAG space (2M) */
+
+#define BCM4710_UART            (BCM4710_REG_EXTIF + 0x00000300)
+
+#define BCM4710_EUART           (BCM4710_EXTIF + 0x00800000)
+#define BCM4710_LED             (BCM4710_EXTIF + 0x00900000)
+
+#define	BCM4712_DEVICE_ID	0x4712		/* 4712 chipcommon chipid */
+#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
+#define	BCM4712LARGE_PKG_ID	0		/* 340pin 4712 package id */
+#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
+#define	BCM4712MID_PKG_ID	2		/* 225pin 4712 package id */
+
+#define	SDIOH_FPGA_ID		0x4380		/* sdio host fpga */
+
+#define BCM5365_DEVICE_ID       0x5365          /* 5365 chipcommon chipid */
+#define	BCM5350_DEVICE_ID	0x5350		/* bcm5350 chipcommon chipid */
+#define	BCM5352_DEVICE_ID	0x5352		/* bcm5352 chipcommon chipid */
+
+#define	BCM4320_DEVICE_ID	0x4320		/* bcm4320 chipcommon chipid */
+
+/* PCMCIA vendor Id's */
+
+#define	VENDOR_BROADCOM_PCMCIA	0x02d0
+
+/* SDIO vendor Id's */
+#define	VENDOR_BROADCOM_SDIO	0x00BF
+
+
+/* boardflags */
+#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
+#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
+#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
+#define	BFL_ENETROBO		0x0010	/* This board has robo switch or core */
+#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
+#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
+#define	BFL_ENETVLAN		0x0100	/* This board has vlan capability */
+#define	BFL_AFTERBURNER		0x0200	/* This board supports Afterburner mode */
+#define BFL_NOPCI		0x0400	/* This board leaves PCI floating */
+#define BFL_FEM			0x0800  /* This board supports the Front End Module */
+#define BFL_EXTLNA		0x1000	/* This board has an external LNA */
+#define BFL_HGPA		0x2000	/* This board has a high gain PA */
+#define	BFL_BTCMOD		0x4000	/* This board' BTCOEXIST is in the alternate gpios */
+#define	BFL_ALTIQ		0x8000	/* Alternate I/Q settings */
+
+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
+#define BOARD_GPIO_HWRAD_B	0x010	/* bit 4 is HWRAD input on 4301 */
+#define	BOARD_GPIO_BTCMOD_IN	0x010	/* bit 4 is the alternate BT Coexistance Input */
+#define	BOARD_GPIO_BTCMOD_OUT	0x020	/* bit 5 is the alternate BT Coexistance Out */
+#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
+#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
+#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
+#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+/* Bus types */
+#define	SB_BUS			0	/* Silicon Backplane */
+#define	PCI_BUS			1	/* PCI target */
+#define	PCMCIA_BUS		2	/* PCMCIA target */
+#define SDIO_BUS		3	/* SDIO target */
+#define JTAG_BUS		4	/* JTAG */
+
+/* Allows optimization for single-bus support */
+#ifdef BCMBUSTYPE
+#define BUSTYPE(bus) (BCMBUSTYPE)
+#else
+#define BUSTYPE(bus) (bus)
+#endif
+
+/* power control defines */
+#define PLL_DELAY		150		/* us pll on delay */
+#define FREF_DELAY		200		/* us fref change delay */
+#define MIN_SLOW_CLK		32		/* us Slow clock period */
+#define	XTAL_ON_DELAY		1000		/* us crystal power-on delay */
+
+/* Reference Board Types */
+
+#define	BU4710_BOARD		0x0400
+#define	VSIM4710_BOARD		0x0401
+#define	QT4710_BOARD		0x0402
+
+#define	BU4610_BOARD		0x0403
+#define	VSIM4610_BOARD		0x0404
+
+#define	BU4307_BOARD		0x0405
+#define	BCM94301CB_BOARD	0x0406
+#define	BCM94301PC_BOARD	0x0406		/* Pcmcia 5v card */
+#define	BCM94301MP_BOARD	0x0407
+#define	BCM94307MP_BOARD	0x0408
+#define	BCMAP4307_BOARD		0x0409
+
+#define	BU4309_BOARD		0x040a
+#define	BCM94309CB_BOARD	0x040b
+#define	BCM94309MP_BOARD	0x040c
+#define	BCM4309AP_BOARD		0x040d
+
+#define	BCM94302MP_BOARD	0x040e
+
+#define	VSIM4310_BOARD		0x040f
+#define	BU4711_BOARD		0x0410
+#define	BCM94310U_BOARD		0x0411
+#define	BCM94310AP_BOARD	0x0412
+#define	BCM94310MP_BOARD	0x0414
+
+#define	BU4306_BOARD		0x0416
+#define	BCM94306CB_BOARD	0x0417
+#define	BCM94306MP_BOARD	0x0418
+
+#define	BCM94710D_BOARD		0x041a
+#define	BCM94710R1_BOARD	0x041b
+#define	BCM94710R4_BOARD	0x041c
+#define	BCM94710AP_BOARD	0x041d
+
+
+#define	BU2050_BOARD		0x041f
+
+
+#define	BCM94309G_BOARD		0x0421
+
+#define	BCM94301PC3_BOARD	0x0422		/* Pcmcia 3.3v card */
+
+#define	BU4704_BOARD		0x0423
+#define	BU4702_BOARD		0x0424
+
+#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
+
+#define	BU4317_BOARD		0x0426
+
+
+#define	BCM94702MN_BOARD	0x0428
+
+/* BCM4702 1U CompactPCI Board */
+#define	BCM94702CPCI_BOARD	0x0429
+
+/* BCM4702 with BCM95380 VLAN Router */
+#define	BCM95380RR_BOARD	0x042a
+
+/* cb4306 with SiGe PA */
+#define	BCM94306CBSG_BOARD	0x042b
+
+/* mp4301 with 2050 radio */
+#define	BCM94301MPL_BOARD	0x042c
+
+/* cb4306 with SiGe PA */
+#define	PCSG94306_BOARD		0x042d
+
+/* bu4704 with sdram */
+#define	BU4704SD_BOARD		0x042e
+
+/* Dual 11a/11g Router */
+#define	BCM94704AGR_BOARD	0x042f
+
+/* 11a-only minipci */
+#define	BCM94308MP_BOARD	0x0430
+
+
+
+/* BCM94317 boards */
+#define BCM94317CB_BOARD	0x0440
+#define BCM94317MP_BOARD	0x0441
+#define BCM94317PCMCIA_BOARD	0x0442
+#define BCM94317SDIO_BOARD	0x0443
+
+#define BU4712_BOARD		0x0444
+#define	BU4712SD_BOARD		0x045d
+#define	BU4712L_BOARD		0x045f
+
+/* BCM4712 boards */
+#define BCM94712AP_BOARD	0x0445
+#define BCM94712P_BOARD		0x0446
+
+/* BCM4318 boards */
+#define BU4318_BOARD		0x0447
+#define CB4318_BOARD		0x0448
+#define MPG4318_BOARD		0x0449
+#define MP4318_BOARD		0x044a
+#define SD4318_BOARD		0x044b
+
+/* BCM63XX boards */
+#define BCM96338_BOARD		0x6338
+#define BCM96345_BOARD		0x6345
+#define BCM96348_BOARD		0x6348
+
+/* Another mp4306 with SiGe */
+#define	BCM94306P_BOARD		0x044c
+
+/* CF-like 4317 modules */
+#define	BCM94317CF_BOARD	0x044d
+
+/* mp4303 */
+#define	BCM94303MP_BOARD	0x044e
+
+/* mpsgh4306 */
+#define	BCM94306MPSGH_BOARD	0x044f
+
+/* BRCM 4306 w/ Front End Modules */
+#define BCM94306MPM  		0x0450
+#define BCM94306MPL  		0x0453
+
+/* 4712agr */
+#define	BCM94712AGR_BOARD	0x0451
+
+/* The real CF 4317 board */
+#define	CFI4317_BOARD		0x0452
+
+/* pcmcia 4303 */
+#define	PC4303_BOARD		0x0454
+
+/* 5350K */
+#define	BCM95350K_BOARD		0x0455
+
+/* 5350R */
+#define	BCM95350R_BOARD		0x0456
+
+/* 4306mplna */
+#define	BCM94306MPLNA_BOARD	0x0457
+
+/* 4320 boards */
+#define	BU4320_BOARD		0x0458
+#define	BU4320S_BOARD		0x0459
+#define	BCM94320PH_BOARD	0x045a
+
+/* 4306mph */
+#define	BCM94306MPH_BOARD	0x045b
+
+/* 4306pciv */
+#define	BCM94306PCIV_BOARD	0x045c
+
+#define	BU4712SD_BOARD		0x045d
+
+#define	BCM94320PFLSH_BOARD	0x045e
+
+#define	BU4712L_BOARD		0x045f
+#define	BCM94712LGR_BOARD	0x0460
+#define	BCM94320R_BOARD		0x0461
+
+#define	BU5352_BOARD		0x0462
+
+#define	BCM94318MPGH_BOARD	0x0463
+
+
+#define	BCM95352GR_BOARD	0x0467
+
+/* bcm95351agr */
+#define	BCM95351AGR_BOARD	0x0470
+
+/* # of GPIO pins */
+#define GPIO_NUMPINS		16
+
+#endif /* _BCMDEVS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
--- linux.old/arch/mips/bcm947xx/include/bcmendian.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h	2005-11-07 22:51:38.772725750 +0100
@@ -0,0 +1,152 @@
+/*
+ * local version of endian.h - byte order defines
+ *
+ * Copyright 2005, Broadcom Corporation   
+ * All Rights Reserved.   
+ *    
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
+ *
+ *  $Id$
+*/
+
+#ifndef _BCMENDIAN_H_
+#define _BCMENDIAN_H_
+
+#include <typedefs.h>
+
+/* Byte swap a 16 bit value */
+#define BCMSWAP16(val) \
+	((uint16)( \
+		(((uint16)(val) & (uint16)0x00ffU) << 8) | \
+		(((uint16)(val) & (uint16)0xff00U) >> 8) ))
+	
+/* Byte swap a 32 bit value */
+#define BCMSWAP32(val) \
+	((uint32)( \
+		(((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
+		(((uint32)(val) & (uint32)0x0000ff00UL) <<  8) | \
+		(((uint32)(val) & (uint32)0x00ff0000UL) >>  8) | \
+		(((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
+		
+/* 2 Byte swap a 32 bit value */
+#define BCMSWAP32BY16(val) \
+	((uint32)( \
+		(((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
+		(((uint32)(val) & (uint32)0xffff0000UL) >> 16) ))
+		
+
+static INLINE uint16
+bcmswap16(uint16 val)
+{
+	return BCMSWAP16(val);
+}
+
+static INLINE uint32
+bcmswap32(uint32 val)
+{
+	return BCMSWAP32(val);
+}
+
+static INLINE uint32
+bcmswap32by16(uint32 val)
+{
+	return BCMSWAP32BY16(val);
+}
+
+/* buf	- start of buffer of shorts to swap */
+/* len  - byte length of buffer */
+static INLINE void
+bcmswap16_buf(uint16 *buf, uint len)
+{
+	len = len/2;
+
+	while(len--){
+		*buf = bcmswap16(*buf);
+		buf++;
+	}
+}
+
+#ifndef hton16
+#ifndef IL_BIGENDIAN
+#define HTON16(i) BCMSWAP16(i)
+#define	hton16(i) bcmswap16(i)
+#define	hton32(i) bcmswap32(i)
+#define	ntoh16(i) bcmswap16(i)
+#define	ntoh32(i) bcmswap32(i)
+#define ltoh16(i) (i)
+#define ltoh32(i) (i)
+#define htol16(i) (i)
+#define htol32(i) (i)
+#else
+#define HTON16(i) (i)
+#define	hton16(i) (i)
+#define	hton32(i) (i)
+#define	ntoh16(i) (i)
+#define	ntoh32(i) (i)
+#define	ltoh16(i) bcmswap16(i)
+#define	ltoh32(i) bcmswap32(i)
+#define htol16(i) bcmswap16(i)
+#define htol32(i) bcmswap32(i)
+#endif
+#endif
+
+#ifndef IL_BIGENDIAN
+#define ltoh16_buf(buf, i)
+#define htol16_buf(buf, i)
+#else
+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
+#endif
+
+/*
+* load 16-bit value from unaligned little endian byte array.
+*/
+static INLINE uint16
+ltoh16_ua(uint8 *bytes)
+{
+	return (bytes[1]<<8)+bytes[0];
+}
+
+/*
+* load 32-bit value from unaligned little endian byte array.
+*/
+static INLINE uint32
+ltoh32_ua(uint8 *bytes)
+{
+	return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
+}
+
+/*
+* load 16-bit value from unaligned big(network) endian byte array.
+*/
+static INLINE uint16
+ntoh16_ua(uint8 *bytes)
+{
+	return (bytes[0]<<8)+bytes[1];
+}
+
+/*
+* load 32-bit value from unaligned big(network) endian byte array.
+*/
+static INLINE uint32
+ntoh32_ua(uint8 *bytes)
+{
+	return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
+}
+
+#define ltoh_ua(ptr) ( \
+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
+	(((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
+)
+
+#define ntoh_ua(ptr) ( \
+	sizeof(*(ptr)) == sizeof(uint8) ?  *(uint8 *)ptr : \
+	sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
+	(((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
+)
+
+#endif /* _BCMENDIAN_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmenet47xx.h linux.dev/arch/mips/bcm947xx/include/bcmenet47xx.h
--- linux.old/arch/mips/bcm947xx/include/bcmenet47xx.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmenet47xx.h	2005-11-07 22:51:38.772725750 +0100
@@ -0,0 +1,229 @@
+/*
+ * Hardware-specific definitions for
+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ * $Id$
+ */
+
+#ifndef	_bcmenet_47xx_h_
+#define	_bcmenet_47xx_h_
+
+#include <bcmenetmib.h>
+#include <bcmenetrxh.h>
+#include <bcmenetphy.h>
+
+#define	BCMENET_NFILTERS	64		/* # ethernet address filter entries */
+#define	BCMENET_MCHASHBASE	0x200		/* multicast hash filter base address */
+#define	BCMENET_MCHASHSIZE	256		/* multicast hash filter size in bytes */
+#define	BCMENET_MAX_DMA		4096		/* chip has 12 bits of DMA addressing */
+
+/* power management event wakeup pattern constants */
+#define	BCMENET_NPMP		4		/* chip supports 4 wakeup patterns */
+#define	BCMENET_PMPBASE		0x400		/* wakeup pattern base address */
+#define	BCMENET_PMPSIZE		0x80		/* 128bytes each pattern */
+#define	BCMENET_PMMBASE		0x600		/* wakeup mask base address */
+#define	BCMENET_PMMSIZE		0x10		/* 128bits each mask */
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+/*
+ * Host Interface Registers
+ */
+typedef volatile struct _bcmenettregs {
+	/* Device and Power Control */
+	uint32	devcontrol;
+	uint32	PAD[2];
+	uint32	biststatus;
+	uint32	wakeuplength;
+	uint32	PAD[3];
+
+	/* Interrupt Control */
+	uint32	intstatus;
+	uint32	intmask;
+	uint32	gptimer;
+	uint32	PAD[23];
+
+	/* Ethernet MAC Address Filtering Control */
+	uint32	PAD[2];
+	uint32	enetftaddr;
+	uint32	enetftdata;
+	uint32	PAD[2];
+
+	/* Ethernet MAC Control */
+	uint32	emactxmaxburstlen;
+	uint32	emacrxmaxburstlen;
+	uint32	emaccontrol;
+	uint32	emacflowcontrol;
+
+	uint32	PAD[20];
+
+	/* DMA Lazy Interrupt Control */
+	uint32	intrecvlazy;
+	uint32	PAD[63];
+
+	/* DMA engine */
+	dma32regp_t	dmaregs;
+	dma32diag_t	dmafifo;
+	uint32	PAD[116];
+
+	/* EMAC Registers */
+	uint32 rxconfig;
+	uint32 rxmaxlength;
+	uint32 txmaxlength;
+	uint32 PAD;
+	uint32 mdiocontrol;
+	uint32 mdiodata;
+	uint32 emacintmask;
+	uint32 emacintstatus;
+	uint32 camdatalo;
+	uint32 camdatahi;
+	uint32 camcontrol;
+	uint32 enetcontrol;
+	uint32 txcontrol;
+	uint32 txwatermark;
+	uint32 mibcontrol;
+	uint32 PAD[49];
+
+	/* EMAC MIB counters */
+	bcmenetmib_t	mib;
+
+	uint32	PAD[585];
+
+	/* Sonics SiliconBackplane config registers */
+	sbconfig_t	sbconfig;
+} bcmenetregs_t;
+
+/* device control */
+#define	DC_PM		((uint32)1 << 7)	/* pattern filtering enable */
+#define	DC_IP		((uint32)1 << 10)	/* internal ephy present (rev >= 1) */
+#define	DC_ER		((uint32)1 << 15)	/* ephy reset */
+#define	DC_MP		((uint32)1 << 16)	/* mii phy mode enable */
+#define	DC_CO		((uint32)1 << 17)	/* mii phy mode: enable clocks */
+#define	DC_PA_MASK	0x7c0000		/* mii phy mode: mdc/mdio phy address */
+#define	DC_PA_SHIFT	18
+#define	DC_FS_MASK	0x03800000		/* fifo size (rev >= 8) */
+#define	DC_FS_SHIFT	23
+#define	DC_FS_4K	0			/* 4Kbytes */
+#define	DC_FS_512	1			/* 512bytes */
+
+/* wakeup length */
+#define	WL_P0_MASK	0x7f			/* pattern 0 */
+#define	WL_D0		((uint32)1 << 7)
+#define	WL_P1_MASK	0x7f00			/* pattern 1 */
+#define	WL_P1_SHIFT	8
+#define	WL_D1		((uint32)1 << 15)
+#define	WL_P2_MASK	0x7f0000		/* pattern 2 */
+#define	WL_P2_SHIFT	16
+#define	WL_D2		((uint32)1 << 23)
+#define	WL_P3_MASK	0x7f000000		/* pattern 3 */
+#define	WL_P3_SHIFT	24
+#define	WL_D3		((uint32)1 << 31)
+
+/* intstatus and intmask */
+#define	I_PME		((uint32)1 << 6)	/* power management event */
+#define	I_TO		((uint32)1 << 7)	/* general purpose timeout */
+#define	I_PC		((uint32)1 << 10)	/* descriptor error */
+#define	I_PD		((uint32)1 << 11)	/* data error */
+#define	I_DE		((uint32)1 << 12)	/* descriptor protocol error */
+#define	I_RU		((uint32)1 << 13)	/* receive descriptor underflow */
+#define	I_RO		((uint32)1 << 14)	/* receive fifo overflow */
+#define	I_XU		((uint32)1 << 15)	/* transmit fifo underflow */
+#define	I_RI		((uint32)1 << 16)	/* receive interrupt */
+#define	I_XI		((uint32)1 << 24)	/* transmit interrupt */
+#define	I_EM		((uint32)1 << 26)	/* emac interrupt */
+#define	I_MW		((uint32)1 << 27)	/* mii write */
+#define	I_MR		((uint32)1 << 28)	/* mii read */
+
+/* emaccontrol */
+#define	EMC_CG		((uint32)1 << 0)	/* crc32 generation enable */
+#define	EMC_EP		((uint32)1 << 2)	/* onchip ephy: powerdown (rev >= 1) */
+#define	EMC_ED		((uint32)1 << 3)	/* onchip ephy: energy detected (rev >= 1) */
+#define	EMC_LC_MASK	0xe0			/* onchip ephy: led control (rev >= 1) */
+#define	EMC_LC_SHIFT	5
+
+/* emacflowcontrol */
+#define	EMF_RFH_MASK	0xff			/* rx fifo hi water mark */
+#define	EMF_PG		((uint32)1 << 15)	/* enable pause frame generation */
+
+/* interrupt receive lazy */
+#define	IRL_TO_MASK	0x00ffffff		/* timeout */
+#define	IRL_FC_MASK	0xff000000		/* frame count */
+#define	IRL_FC_SHIFT	24			/* frame count */
+
+/* emac receive config */
+#define	ERC_DB		((uint32)1 << 0)	/* disable broadcast */
+#define	ERC_AM		((uint32)1 << 1)	/* accept all multicast */
+#define	ERC_RDT		((uint32)1 << 2)	/* receive disable while transmitting */
+#define	ERC_PE		((uint32)1 << 3)	/* promiscuous enable */
+#define	ERC_LE		((uint32)1 << 4)	/* loopback enable */
+#define	ERC_FE		((uint32)1 << 5)	/* enable flow control */
+#define	ERC_UF		((uint32)1 << 6)	/* accept unicast flow control frame */
+#define	ERC_RF		((uint32)1 << 7)	/* reject filter */
+#define	ERC_CA		((uint32)1 << 8)	/* cam absent */
+
+/* emac mdio control */
+#define	MC_MF_MASK	0x7f			/* mdc frequency */
+#define	MC_PE		((uint32)1 << 7)	/* mii preamble enable */
+
+/* emac mdio data */
+#define	MD_DATA_MASK	0xffff			/* r/w data */
+#define	MD_TA_MASK	0x30000			/* turnaround value */
+#define	MD_TA_SHIFT	16
+#define	MD_TA_VALID	(2 << MD_TA_SHIFT)	/* valid ta */
+#define	MD_RA_MASK	0x7c0000		/* register address */
+#define	MD_RA_SHIFT	18
+#define	MD_PMD_MASK	0xf800000		/* physical media device */
+#define	MD_PMD_SHIFT	23
+#define	MD_OP_MASK	0x30000000		/* opcode */
+#define	MD_OP_SHIFT	28
+#define	MD_OP_WRITE	(1 << MD_OP_SHIFT)	/* write op */
+#define	MD_OP_READ	(2 << MD_OP_SHIFT)	/* read op */
+#define	MD_SB_MASK	0xc0000000		/* start bits */
+#define	MD_SB_SHIFT	30
+#define	MD_SB_START	(0x1 << MD_SB_SHIFT)	/* start of frame */
+
+/* emac intstatus and intmask */
+#define	EI_MII		((uint32)1 << 0)	/* mii mdio interrupt */
+#define	EI_MIB		((uint32)1 << 1)	/* mib interrupt */
+#define	EI_FLOW		((uint32)1 << 2)	/* flow control interrupt */
+
+/* emac cam data high */
+#define	CD_V		((uint32)1 << 16)	/* valid bit */
+
+/* emac cam control */
+#define	CC_CE		((uint32)1 << 0)	/* cam enable */
+#define	CC_MS		((uint32)1 << 1)	/* mask select */
+#define	CC_RD		((uint32)1 << 2)	/* read */
+#define	CC_WR		((uint32)1 << 3)	/* write */
+#define	CC_INDEX_MASK	0x3f0000		/* index */
+#define	CC_INDEX_SHIFT	16
+#define	CC_CB		((uint32)1 << 31)	/* cam busy */
+
+/* emac ethernet control */
+#define	EC_EE		((uint32)1 << 0)	/* emac enable */
+#define	EC_ED		((uint32)1 << 1)	/* emac disable */
+#define	EC_ES		((uint32)1 << 2)	/* emac soft reset */
+#define	EC_EP		((uint32)1 << 3)	/* external phy select */
+
+/* emac transmit control */
+#define	EXC_FD		((uint32)1 << 0)	/* full duplex */
+#define	EXC_FM		((uint32)1 << 1)	/* flowmode */
+#define	EXC_SB		((uint32)1 << 2)	/* single backoff enable */
+#define	EXC_SS		((uint32)1 << 3)	/* small slottime */
+
+/* emac mib control */
+#define	EMC_RZ		((uint32)1 << 0)	/* autoclear on read */
+
+#endif	/* _bcmenet_47xx_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetmib.h linux.dev/arch/mips/bcm947xx/include/bcmenetmib.h
--- linux.old/arch/mips/bcm947xx/include/bcmenetmib.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmenetmib.h	2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,81 @@
+/*
+ * Hardware-specific MIB definition for
+ * Broadcom Home Networking Division
+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
+ * 
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ * $Id$
+ */
+
+#ifndef _bcmenetmib_h_
+#define _bcmenetmib_h_
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+/*
+ * EMAC MIB Registers
+ */
+typedef volatile struct {
+	uint32 tx_good_octets;
+	uint32 tx_good_pkts;
+	uint32 tx_octets;
+	uint32 tx_pkts;
+	uint32 tx_broadcast_pkts;
+	uint32 tx_multicast_pkts;
+	uint32 tx_len_64;
+	uint32 tx_len_65_to_127;
+	uint32 tx_len_128_to_255;
+	uint32 tx_len_256_to_511;
+	uint32 tx_len_512_to_1023;
+	uint32 tx_len_1024_to_max;
+	uint32 tx_jabber_pkts;
+	uint32 tx_oversize_pkts;
+	uint32 tx_fragment_pkts;
+	uint32 tx_underruns;
+	uint32 tx_total_cols;
+	uint32 tx_single_cols;
+	uint32 tx_multiple_cols;
+	uint32 tx_excessive_cols;
+	uint32 tx_late_cols;
+	uint32 tx_defered;
+	uint32 tx_carrier_lost;
+	uint32 tx_pause_pkts;
+	uint32 PAD[8];
+
+	uint32 rx_good_octets;
+	uint32 rx_good_pkts;
+	uint32 rx_octets;
+	uint32 rx_pkts;
+	uint32 rx_broadcast_pkts;
+	uint32 rx_multicast_pkts;
+	uint32 rx_len_64;
+	uint32 rx_len_65_to_127;
+	uint32 rx_len_128_to_255;
+	uint32 rx_len_256_to_511;
+	uint32 rx_len_512_to_1023;
+	uint32 rx_len_1024_to_max;
+	uint32 rx_jabber_pkts;
+	uint32 rx_oversize_pkts;
+	uint32 rx_fragment_pkts;
+	uint32 rx_missed_pkts;
+	uint32 rx_crc_align_errs;
+	uint32 rx_undersize;
+	uint32 rx_crc_errs;
+	uint32 rx_align_errs;
+	uint32 rx_symbol_errs;
+	uint32 rx_pause_pkts;
+	uint32 rx_nonpause_pkts;
+} bcmenetmib_t;
+
+#endif	/* _bcmenetmib_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetphy.h linux.dev/arch/mips/bcm947xx/include/bcmenetphy.h
--- linux.old/arch/mips/bcm947xx/include/bcmenetphy.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmenetphy.h	2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,58 @@
+/*
+ * Misc Broadcom BCM47XX MDC/MDIO enet phy definitions.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ * $Id$
+ */
+
+#ifndef	_bcmenetphy_h_
+#define	_bcmenetphy_h_
+
+/* phy address */
+#define	MAXEPHY		32			/* mdio phy addresses are 5bit quantities */
+#define	EPHY_MASK	0x1f
+#define	EPHY_NONE	31			/* nvram: no phy present at all */
+#define	EPHY_NOREG	30			/* nvram: no local phy regs */
+
+/* just a few phy registers */
+#define	CTL_RESET	(1 << 15)		/* reset */
+#define	CTL_LOOP	(1 << 14)		/* loopback */
+#define	CTL_SPEED	(1 << 13)		/* speed selection 0=10, 1=100 */
+#define	CTL_ANENAB	(1 << 12)		/* autonegotiation enable */
+#define	CTL_RESTART	(1 << 9)		/* restart autonegotiation */
+#define	CTL_DUPLEX	(1 << 8)		/* duplex mode 0=half, 1=full */
+
+#define	ADV_10FULL	(1 << 6)		/* autonegotiate advertise 10full */
+#define	ADV_10HALF	(1 << 5)		/* autonegotiate advertise 10half */
+#define	ADV_100FULL	(1 << 8)		/* autonegotiate advertise 100full */
+#define	ADV_100HALF	(1 << 7)		/* autonegotiate advertise 100half */
+
+/* link partner ability register */
+#define LPA_SLCT	0x001f			/* same as advertise selector */
+#define LPA_10HALF	0x0020			/* can do 10mbps half-duplex */
+#define LPA_10FULL	0x0040			/* can do 10mbps full-duplex */
+#define LPA_100HALF	0x0080			/* can do 100mbps half-duplex */
+#define LPA_100FULL	0x0100			/* can do 100mbps full-duplex */
+#define LPA_100BASE4	0x0200			/* can do 100mbps 4k packets */
+#define LPA_RESV	0x1c00			/* unused */
+#define LPA_RFAULT	0x2000			/* link partner faulted */
+#define LPA_LPACK	0x4000			/* link partner acked us */
+#define LPA_NPAGE	0x8000			/* next page bit */
+
+#define LPA_DUPLEX	(LPA_10FULL | LPA_100FULL)
+#define LPA_100		(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+#define	STAT_REMFAULT	(1 << 4)		/* remote fault */
+#define	STAT_LINK	(1 << 2)		/* link status */
+#define	STAT_JAB	(1 << 1)		/* jabber detected */
+#define	AUX_FORCED	(1 << 2)		/* forced 10/100 */
+#define	AUX_SPEED	(1 << 1)		/* speed 0=10mbps 1=100mbps */
+#define	AUX_DUPLEX	(1 << 0)		/* duplex 0=half 1=full */
+
+#endif	/* _bcmenetphy_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetrxh.h linux.dev/arch/mips/bcm947xx/include/bcmenetrxh.h
--- linux.old/arch/mips/bcm947xx/include/bcmenetrxh.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmenetrxh.h	2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,43 @@
+/*
+ * Hardware-specific Receive Data Header for the
+ * Broadcom Home Networking Division
+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ * $Id$
+ */
+
+#ifndef _bcmenetrxh_h_
+#define	_bcmenetrxh_h_
+
+/*
+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
+ * with every frame consisting of
+ * 16bits of frame length, followed by
+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
+ */
+typedef volatile struct {
+	uint16	len;
+	uint16	flags;
+	uint16	pad[12];
+} bcmenetrxh_t;
+
+#define	RXHDR_LEN	28
+
+#define	RXF_L		((uint16)1 << 11)	/* last buffer in a frame */
+#define	RXF_MISS	((uint16)1 << 7)	/* received due to promisc mode */
+#define	RXF_BRDCAST	((uint16)1 << 6)	/* dest is broadcast address */
+#define	RXF_MULT	((uint16)1 << 5)	/* dest is multicast address */
+#define	RXF_LG		((uint16)1 << 4)	/* frame length > rxmaxlength */
+#define	RXF_NO		((uint16)1 << 3)	/* odd number of nibbles */
+#define	RXF_RXER	((uint16)1 << 2)	/* receive symbol error */
+#define	RXF_CRC		((uint16)1 << 1)	/* crc error */
+#define	RXF_OV		((uint16)1 << 0)	/* fifo overflow */
+
+#endif	/* _bcmenetrxh_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h	2005-11-07 22:51:38.772725750 +0100
@@ -0,0 +1,141 @@
+/*
+ * NVRAM variable manipulation
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _bcmnvram_h_
+#define _bcmnvram_h_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <typedefs.h>
+
+struct nvram_header {
+	uint32 magic;
+	uint32 len;
+	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	uint32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	uint32 config_ncdl;	/* ncdl values for memc */
+};
+
+struct nvram_tuple {
+	char *name;
+	char *value;
+	struct nvram_tuple *next;
+};
+
+/*
+ * Initialize NVRAM access. May be unnecessary or undefined on certain
+ * platforms.
+ */
+extern int BCMINIT(nvram_init)(void *sbh);
+
+/*
+ * Disable NVRAM access. May be unnecessary or undefined on certain
+ * platforms.
+ */
+extern void BCMINIT(nvram_exit)(void *sbh);
+
+/*
+ * Get the value of an NVRAM variable. The pointer returned may be
+ * invalid after a set.
+ * @param	name	name of variable to get
+ * @return	value of variable or NULL if undefined
+ */
+extern char * BCMINIT(nvram_get)(const char *name);
+
+/* 
+ * Read the reset GPIO value from the nvram and set the GPIO
+ * as input
+ */
+extern int BCMINITFN(nvram_resetgpio_init)(void *sbh);
+
+/* 
+ * Get the value of an NVRAM variable.
+ * @param	name	name of variable to get
+ * @return	value of variable or NUL if undefined
+ */
+#define nvram_safe_get(name) (BCMINIT(nvram_get)(name) ? : "")
+
+/*
+ * Match an NVRAM variable.
+ * @param	name	name of variable to match
+ * @param	match	value to compare against value of variable
+ * @return	TRUE if variable is defined and its value is string equal
+ *		to match or FALSE otherwise
+ */
+static INLINE int
+nvram_match(char *name, char *match) {
+	const char *value = BCMINIT(nvram_get)(name);
+	return (value && !strcmp(value, match));
+}
+
+/*
+ * Inversely match an NVRAM variable.
+ * @param	name	name of variable to match
+ * @param	match	value to compare against value of variable
+ * @return	TRUE if variable is defined and its value is not string
+ *		equal to invmatch or FALSE otherwise
+ */
+static INLINE int
+nvram_invmatch(char *name, char *invmatch) {
+	const char *value = BCMINIT(nvram_get)(name);
+	return (value && strcmp(value, invmatch));
+}
+
+/*
+ * Set the value of an NVRAM variable. The name and value strings are
+ * copied into private storage. Pointers to previously set values
+ * may become invalid. The new value may be immediately
+ * retrieved but will not be permanently stored until a commit.
+ * @param	name	name of variable to set
+ * @param	value	value of variable
+ * @return	0 on success and errno on failure
+ */
+extern int BCMINIT(nvram_set)(const char *name, const char *value);
+
+/*
+ * Unset an NVRAM variable. Pointers to previously set values
+ * remain valid until a set.
+ * @param	name	name of variable to unset
+ * @return	0 on success and errno on failure
+ * NOTE: use nvram_commit to commit this change to flash.
+ */
+extern int BCMINIT(nvram_unset)(const char *name);
+
+/*
+ * Commit NVRAM variables to permanent storage. All pointers to values
+ * may be invalid after a commit.
+ * NVRAM values are undefined after a commit.
+ * @return	0 on success and errno on failure
+ */
+extern int BCMINIT(nvram_commit)(void);
+
+/*
+ * Get all NVRAM variables (format name=value\0 ... \0\0).
+ * @param	buf	buffer to store variables
+ * @param	count	size of buffer in bytes
+ * @return	0 on success and errno on failure
+ */
+extern int BCMINIT(nvram_getall)(char *buf, int count);
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
+#define NVRAM_VERSION		1
+#define NVRAM_HEADER_SIZE	20
+#define NVRAM_SPACE		0x8000
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+#endif /* _bcmnvram_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmparams.h linux.dev/arch/mips/bcm947xx/include/bcmparams.h
--- linux.old/arch/mips/bcm947xx/include/bcmparams.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmparams.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,25 @@
+/*
+ * Misc system wide parameters.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef	_bcmparams_h_
+#define	_bcmparams_h_
+
+#define VLAN_MAXVID	15	/* Max. VLAN ID supported/allowed */
+
+#define VLAN_NUMPRIS	8	/* # of prio, start from 0 */
+
+#define DEV_NUMIFS	16	/* Max. # of devices/interfaces supported */
+
+#define WL_MAXBSSCFG	16	/* maximum number of BSS Configs we can configure */
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,23 @@
+/*
+ * Misc useful routines to access NIC local SROM/OTP .
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef	_bcmsrom_h_
+#define	_bcmsrom_h_
+
+extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count);
+
+extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
+extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
+
+#endif	/* _bcmsrom_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
--- linux.old/arch/mips/bcm947xx/include/bcmutils.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,313 @@
+/*
+ * Misc useful os-independent macros and functions.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef	_bcmutils_h_
+#define	_bcmutils_h_
+
+/*** driver-only section ***/
+#ifdef BCMDRIVER
+#include <osl.h>
+
+#define _BCM_U	0x01	/* upper */
+#define _BCM_L	0x02	/* lower */
+#define _BCM_D	0x04	/* digit */
+#define _BCM_C	0x08	/* cntrl */
+#define _BCM_P	0x10	/* punct */
+#define _BCM_S	0x20	/* white space (space/lf/tab) */
+#define _BCM_X	0x40	/* hex digit */
+#define _BCM_SP	0x80	/* hard space (0x20) */
+
+#define GPIO_PIN_NOTDEFINED 	0x20 
+
+extern unsigned char bcm_ctype[];
+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
+
+#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
+#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
+#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
+#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
+#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
+#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
+#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
+#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
+#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
+
+/*
+ * Spin at most 'us' microseconds while 'exp' is true.
+ * Caller should explicitly test 'exp' when this completes
+ * and take appropriate error action if 'exp' is still true.
+ */
+#define SPINWAIT(exp, us) { \
+	uint countdown = (us) + 9; \
+	while ((exp) && (countdown >= 10)) {\
+		OSL_DELAY(10); \
+		countdown -= 10; \
+	} \
+}
+
+/* generic osl packet queue */
+struct pktq {
+	void *head;	/* first packet to dequeue */
+	void *tail;	/* last packet to dequeue */
+	uint len;	/* number of queued packets */
+	uint maxlen;	/* maximum number of queued packets */
+	bool priority;	/* enqueue by packet priority */
+	uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */
+};
+#define DEFAULT_QLEN	128
+
+#define	pktq_len(q)	((q)->len)
+#define	pktq_avail(q)	((q)->maxlen - (q)->len)
+#define	pktq_head(q)	((q)->head)
+#define	pktq_full(q)	((q)->len >= (q)->maxlen)
+#define	_pktq_pri(q, pri)	((q)->prio_map[pri])
+#define	pktq_tailpri(q)	((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0))
+
+/* externs */
+/* packet */
+extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
+extern uint pkttotlen(osl_t *osh, void *);
+extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]);
+extern void pktenq(struct pktq *q, void *p, bool lifo);
+extern void *pktdeq(struct pktq *q);
+extern void *pktdeqtail(struct pktq *q);
+/* string */
+extern uint bcm_atoi(char *s);
+extern uchar bcm_toupper(uchar c);
+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
+extern char *bcmstrstr(char *haystack, char *needle);
+extern char *bcmstrcat(char *dest, const char *src);
+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
+/* ethernet address */
+extern char *bcm_ether_ntoa(char *ea, char *buf);
+extern int bcm_ether_atoe(char *p, char *ea);
+/* delay */
+extern void bcm_mdelay(uint ms);
+/* variable access */
+extern char *getvar(char *vars, char *name);
+extern int getintvar(char *vars, char *name);
+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
+#define	bcmlog(fmt, a1, a2)
+#define	bcmdumplog(buf, size)	*buf = '\0'
+#define	bcmdumplogent(buf, idx)	-1
+
+#endif	/* #ifdef BCMDRIVER */
+
+/*** driver/apps-shared section ***/
+
+#define BCME_STRLEN 		64
+#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
+
+
+/* 
+ * error codes could be added but the defined ones shouldn't be changed/deleted 
+ * these error codes are exposed to the user code 
+ * when ever a new error code is added to this list 
+ * please update errorstring table with the related error string and 
+ * update osl files with os specific errorcode map   
+*/
+
+#define BCME_ERROR			-1	/* Error generic */
+#define BCME_BADARG			-2	/* Bad Argument */
+#define BCME_BADOPTION			-3	/* Bad option */
+#define BCME_NOTUP			-4	/* Not up */
+#define BCME_NOTDOWN			-5	/* Not down */
+#define BCME_NOTAP			-6	/* Not AP */
+#define BCME_NOTSTA			-7	/* Not STA  */
+#define BCME_BADKEYIDX			-8	/* BAD Key Index */
+#define BCME_RADIOOFF 			-9	/* Radio Off */
+#define BCME_NOTBANDLOCKED		-10	/* Not  bandlocked */
+#define BCME_NOCLK			-11	/* No Clock*/
+#define BCME_BADRATESET			-12	/* BAD RateSet*/
+#define BCME_BADBAND			-13	/* BAD Band */
+#define BCME_BUFTOOSHORT		-14	/* Buffer too short */	
+#define BCME_BUFTOOLONG			-15	/* Buffer too Long */	
+#define BCME_BUSY			-16	/* Busy*/	
+#define BCME_NOTASSOCIATED		-17	/* Not associated*/
+#define BCME_BADSSIDLEN			-18	/* BAD SSID Len */
+#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel*/
+#define BCME_BADCHAN			-20	/* BAD Channel */
+#define BCME_BADADDR			-21	/* BAD Address*/
+#define BCME_NORESOURCE			-22	/* No resources*/
+#define BCME_UNSUPPORTED		-23	/* Unsupported*/
+#define BCME_BADLEN			-24	/* Bad Length*/
+#define BCME_NOTREADY			-25	/* Not ready Yet*/
+#define BCME_EPERM			-26	/* Not Permitted */
+#define BCME_NOMEM			-27	/* No Memory */
+#define BCME_ASSOCIATED			-28	/* Associated */
+#define BCME_RANGE			-29	/* Range Error*/
+#define BCME_NOTFOUND			-30	/* Not found */
+#define BCME_LAST			BCME_NOTFOUND	
+
+#ifndef ABS
+#define	ABS(a)			(((a)<0)?-(a):(a))
+#endif
+
+#ifndef MIN
+#define	MIN(a, b)		(((a)<(b))?(a):(b))
+#endif
+
+#ifndef MAX
+#define	MAX(a, b)		(((a)>(b))?(a):(b))
+#endif
+
+#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
+#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
+#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
+#define	ISPOWEROF2(x)		((((x)-1)&(x))==0)
+#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
+#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
+#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
+
+/* bit map related macros */
+#ifndef setbit
+#define	NBBY	8	/* 8 bits per byte */
+#define	setbit(a,i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define	clrbit(a,i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define	isset(a,i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define	isclr(a,i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif
+
+#define	NBITS(type)	(sizeof(type) * 8)
+#define NBITVAL(bits)	(1 << (bits))
+#define MAXBITVAL(bits)	((1 << (bits)) - 1)
+
+/* crc defines */
+#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
+#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
+#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
+
+/* bcm_format_flags() bit description structure */
+typedef struct bcm_bit_desc {
+	uint32	bit;
+	char*	name;
+} bcm_bit_desc_t;
+
+/* tag_ID/length/value_buffer tuple */
+typedef struct bcm_tlv {
+	uint8	id;
+	uint8	len;
+	uint8	data[1];
+} bcm_tlv_t;
+
+/* Check that bcm_tlv_t fits into the given buflen */
+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
+
+/* buffer length for ethernet address from bcm_ether_ntoa() */
+#define ETHER_ADDR_STR_LEN	18
+
+/* unaligned load and store macros */
+#ifdef IL_BIGENDIAN
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+	a[0] = (v >> 24) & 0xff;
+	a[1] = (v >> 16) & 0xff;
+	a[2] = (v >> 8) & 0xff;
+	a[3] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+	return ((a[0] << 8) | a[1]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+	a[0] = (v >> 8) & 0xff;
+	a[1] = v & 0xff;
+}
+
+#else
+
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+	a[3] = (v >> 24) & 0xff;
+	a[2] = (v >> 16) & 0xff;
+	a[1] = (v >> 8) & 0xff;
+	a[0] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+	return ((a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+	a[1] = (v >> 8) & 0xff;
+	a[0] = v & 0xff;
+}
+
+#endif
+
+/* externs */
+/* crc */
+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
+extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
+extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);
+/* format/print */
+/* IE parsing */
+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
+
+/* bcmerror*/
+extern const char *bcmerrorstr(int bcmerror);
+
+/* multi-bool data type: set of bools, mbool is true if any is set */
+typedef uint32 mbool;
+#define mboolset(mb, bit)		(mb |= bit)		/* set one bool */
+#define mboolclr(mb, bit)		(mb &= ~bit)		/* clear one bool */
+#define mboolisset(mb, bit)		((mb & bit) != 0)	/* TRUE if one bool is set */
+#define	mboolmaskset(mb, mask, val)	((mb) = (((mb) & ~(mask)) | (val)))
+
+/* power conversion */
+extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
+extern uint8 bcm_mw_to_qdbm(uint16 mw);
+
+/* generic datastruct to help dump routines */
+struct fielddesc {
+	char 	*nameandfmt;
+	uint32 	offset;
+	uint32 	len;
+};
+
+typedef  uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
+extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize);
+
+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
+
+#endif	/* _bcmutils_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h
--- linux.old/arch/mips/bcm947xx/include/bitfuncs.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h	2005-11-07 21:57:07.849586000 +0100
@@ -0,0 +1,85 @@
+/*
+ * bit manipulation utility functions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef _BITFUNCS_H
+#define _BITFUNCS_H
+
+#include <typedefs.h>
+
+/* local prototypes */
+static INLINE uint32 find_msbit(uint32 x);
+
+
+/*
+ * find_msbit: returns index of most significant set bit in x, with index
+ *   range defined as 0-31.  NOTE: returns zero if input is zero.
+ */
+
+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
+
+/*
+ * Implementation for Pentium processors and gcc.  Note that this
+ * instruction is actually very slow on some processors (e.g., family 5,
+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
+ * implementation instead.
+ */
+static INLINE uint32 find_msbit(uint32 x)
+{
+	uint msbit;
+        __asm__("bsrl %1,%0"
+                :"=r" (msbit)
+                :"r" (x));
+        return msbit;
+}
+
+#else
+
+/*
+ * Generic Implementation
+ */
+
+#define DB_POW_MASK16	0xffff0000
+#define DB_POW_MASK8	0x0000ff00
+#define DB_POW_MASK4	0x000000f0
+#define DB_POW_MASK2	0x0000000c
+#define DB_POW_MASK1	0x00000002
+
+static INLINE uint32 find_msbit(uint32 x)
+{
+	uint32 temp_x = x;
+	uint msbit = 0;
+	if (temp_x & DB_POW_MASK16) {
+		temp_x >>= 16;
+		msbit = 16;
+	}
+	if (temp_x & DB_POW_MASK8) {
+		temp_x >>= 8;
+		msbit += 8;
+	}
+	if (temp_x & DB_POW_MASK4) {
+		temp_x >>= 4;
+		msbit += 4;
+	}
+	if (temp_x & DB_POW_MASK2) {
+		temp_x >>= 2;
+		msbit += 2;
+	}
+	if (temp_x & DB_POW_MASK1) {
+		msbit += 1;
+	}
+	return(msbit);
+}
+
+#endif
+
+#endif /* _BITFUNCS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/cfe_osl.h linux.dev/arch/mips/bcm947xx/include/cfe_osl.h
--- linux.old/arch/mips/bcm947xx/include/cfe_osl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/cfe_osl.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,191 @@
+/*
+ * CFE boot loader OS Abstraction Layer.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * $Id$
+ */
+
+#ifndef _cfe_osl_h_
+#define _cfe_osl_h_
+
+#include <lib_types.h>
+#include <lib_string.h>
+#include <lib_printf.h>
+#include <lib_malloc.h>
+#include <cpu_config.h>
+#include <cfe_timer.h>
+#include <cfe_iocb.h>
+#include <cfe_devfuncs.h>
+#include <addrspace.h>
+
+#include <typedefs.h>
+
+/* dump string */
+extern int (*xprinthook)(const char *str);
+#define puts(str) do { if (xprinthook) xprinthook(str); } while (0)
+
+/* assert and panic */
+#define	ASSERT(exp)		do {} while (0)
+
+/* PCMCIA attribute space access macros */
+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
+	bzero(buf, size)
+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
+	do {} while (0)
+
+/* PCI configuration space access macros */
+#define	OSL_PCI_READ_CONFIG(loc, offset, size) \
+	(offset == 8 ? 0 : 0xffffffff)
+#define	OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
+	do {} while (0)
+
+/* PCI device bus # and slot # */
+#define OSL_PCI_BUS(osh)	(0)
+#define OSL_PCI_SLOT(osh)	(0)
+
+/* register access macros */
+#define wreg32(r, v)		(*(volatile uint32*)(r) = (uint32)(v))
+#define rreg32(r)		(*(volatile uint32*)(r))
+#ifdef IL_BIGENDIAN
+#define wreg16(r, v)		(*(volatile uint16*)((ulong)(r)^2) = (uint16)(v))
+#define rreg16(r)		(*(volatile uint16*)((ulong)(r)^2))
+#define wreg8(r, v)		(*(volatile uint8*)((ulong)(r)^3) = (uint8)(v))
+#define rreg8(r)		(*(volatile uint8*)((ulong)(r)^3))
+#else
+#define wreg16(r, v)		(*(volatile uint16*)(r) = (uint16)(v))
+#define rreg16(r)		(*(volatile uint16*)(r))
+#define wreg8(r, v)		(*(volatile uint8*)(r) = (uint8)(v))
+#define rreg8(r)		(*(volatile uint8*)(r))
+#endif
+#define R_REG(r) ({ \
+	__typeof(*(r)) __osl_v; \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	__osl_v = rreg8((r)); break; \
+	case sizeof(uint16):	__osl_v = rreg16((r)); break; \
+	case sizeof(uint32):	__osl_v = rreg32((r)); break; \
+	} \
+	__osl_v; \
+})
+#define W_REG(r, v) do { \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	wreg8((r), (v)); break; \
+	case sizeof(uint16):	wreg16((r), (v)); break; \
+	case sizeof(uint32):	wreg32((r), (v)); break; \
+	} \
+} while (0)
+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
+
+/* bcopy, bcmp, and bzero */
+#define bcmp(b1, b2, len)	lib_memcmp((b1), (b2), (len))
+
+#define osl_attach(pdev)	((osl_t*)pdev)
+#define osl_detach(osh)		
+
+/* general purpose memory allocation */
+#define	MALLOC(osh, size)	KMALLOC((size),0)
+#define	MFREE(osh, addr, size)	KFREE((addr))
+#define	MALLOCED(osh)		(0)
+#define	MALLOC_DUMP(osh, buf, sz)
+#define	MALLOC_FAILED(osh)	(0)
+
+/* uncached virtual address */
+#define	OSL_UNCACHED(va)	((void*)UNCADDR((ulong)(va)))
+
+/* host/bus architecture-specific address byte swap */
+#define BUS_SWAP32(v)		(v)
+
+/* get processor cycle count */
+#define OSL_GETCYCLES(x)	((x) = 0)
+
+/* microsecond delay */
+#define	OSL_DELAY(usec)		cfe_usleep((cfe_cpu_speed/CPUCFG_CYCLESPERCPUTICK/1000000*(usec)))
+
+#define OSL_ERROR(bcmerror)	osl_error(bcmerror)
+
+/* map/unmap physical to virtual I/O */
+#define	REG_MAP(pa, size)	((void*)UNCADDR((ulong)(pa)))
+#define	REG_UNMAP(va)		do {} while (0)
+
+/* dereference an address that may cause a bus exception */
+#define	BUSPROBE(val, addr)	osl_busprobe(&(val), (uint32)(addr))
+extern int osl_busprobe(uint32 *val, uint32 addr);
+
+/* allocate/free shared (dma-able) consistent (uncached) memory */
+#define	DMA_CONSISTENT_ALIGN	4096
+#define	DMA_ALLOC_CONSISTENT(osh, size, pap) \
+	osl_dma_alloc_consistent((size), (pap))
+#define	DMA_FREE_CONSISTENT(osh, va, size, pa) \
+	osl_dma_free_consistent((void*)(va))
+extern void *osl_dma_alloc_consistent(uint size, ulong *pap);
+extern void osl_dma_free_consistent(void *va);
+
+/* map/unmap direction */
+#define	DMA_TX			1
+#define	DMA_RX			2
+
+/* map/unmap shared (dma-able) memory */
+#define	DMA_MAP(osh, va, size, direction, lb) ({ \
+	cfe_flushcache(CFE_CACHE_FLUSH_D); \
+	PHYSADDR((ulong)(va)); \
+})
+#define	DMA_UNMAP(osh, pa, size, direction, p) \
+	do {} while (0)
+
+/* shared (dma-able) memory access macros */
+#define	R_SM(r)			*(r)
+#define	W_SM(r, v)		(*(r) = (v))
+#define	BZERO_SM(r, len)	lib_memset((r), '\0', (len))
+
+/* generic packet structure */
+#define LBUFSZ		4096
+#define LBDATASZ	(LBUFSZ - sizeof(struct lbuf))
+struct lbuf {	
+	struct lbuf	*next;		/* pointer to next lbuf if in a chain */
+	struct lbuf	*link;		/* pointer to next lbuf if in a list */
+	uchar		*head;		/* start of buffer */
+	uchar		*end;		/* end of buffer */
+	uchar		*data;		/* start of data */
+	uchar		*tail;		/* end of data */
+	uint		len;		/* nbytes of data */
+	void		*cookie;	/* generic cookie */
+};
+
+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
+#define	PKTBUFSZ	2048
+
+/* packet primitives */
+#define	PKTGET(osh, len, send)		((void*)osl_pktget((len)))
+#define	PKTFREE(osh, lb, send)		osl_pktfree((struct lbuf*)(lb))
+#define	PKTDATA(osh, lb)		(((struct lbuf*)(lb))->data)
+#define	PKTLEN(osh, lb)			(((struct lbuf*)(lb))->len)
+#define PKTHEADROOM(osh, lb)		(PKTDATA(osh,lb)-(((struct lbuf*)(lb))->head))
+#define PKTTAILROOM(osh, lb)		((((struct lbuf*)(lb))->end)-(((struct lbuf*)(lb))->tail))
+#define	PKTNEXT(osh, lb)		(((struct lbuf*)(lb))->next)
+#define	PKTSETNEXT(lb, x)		(((struct lbuf*)(lb))->next = (struct lbuf*)(x))
+#define	PKTSETLEN(osh, lb, len)		osl_pktsetlen((struct lbuf*)(lb), (len))
+#define	PKTPUSH(osh, lb, bytes)		osl_pktpush((struct lbuf*)(lb), (bytes))
+#define	PKTPULL(osh, lb, bytes)		osl_pktpull((struct lbuf*)(lb), (bytes))
+#define	PKTDUP(osh, lb)			osl_pktdup((struct lbuf*)(lb))
+#define	PKTCOOKIE(lb)			(((struct lbuf*)(lb))->cookie)
+#define	PKTSETCOOKIE(lb, x)		(((struct lbuf*)(lb))->cookie = (void*)(x))
+#define	PKTLINK(lb)			(((struct lbuf*)(lb))->link)
+#define	PKTSETLINK(lb, x)		(((struct lbuf*)(lb))->link = (struct lbuf*)(x))
+#define	PKTPRIO(lb)			(0)
+#define	PKTSETPRIO(lb, x)		do {} while (0)
+extern struct lbuf *osl_pktget(uint len);
+extern void osl_pktfree(struct lbuf *lb);
+extern void osl_pktsetlen(struct lbuf *lb, uint len);
+extern uchar *osl_pktpush(struct lbuf *lb, uint bytes);
+extern uchar *osl_pktpull(struct lbuf *lb, uint bytes);
+extern struct lbuf *osl_pktdup(struct lbuf *lb);
+extern int osl_error(int bcmerror);
+
+#endif	/* _cfe_osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/epivers.h linux.dev/arch/mips/bcm947xx/include/epivers.h
--- linux.old/arch/mips/bcm947xx/include/epivers.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/epivers.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ *
+*/
+
+#ifndef _epivers_h_
+#define _epivers_h_
+
+#ifdef	linux
+#include <linux/config.h>
+#endif
+
+/* Vendor Name, ASCII, 32 chars max */
+#ifdef COMPANYNAME
+#define	HPNA_VENDOR 		COMPANYNAME
+#else
+#define	HPNA_VENDOR 		"Broadcom Corporation"
+#endif
+
+/* Driver Date, ASCII, 32 chars max */
+#define HPNA_DRV_BUILD_DATE	__DATE__
+
+/* Hardware Manufacture Date, ASCII, 32 chars max */
+#define HPNA_HW_MFG_DATE	"Not Specified"
+
+/* See documentation for Device Type values, 32 values max */
+#ifndef	HPNA_DEV_TYPE
+
+#if	defined(CONFIG_BRCM_VJ)
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
+
+#elif	defined(CONFIG_BCRM_93725)
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
+
+#else
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
+
+#endif
+
+#endif	/* !HPNA_DEV_TYPE */
+
+
+#define	EPI_MAJOR_VERSION	3
+
+#define	EPI_MINOR_VERSION	130
+
+#define	EPI_RC_NUMBER		20
+
+#define	EPI_INCREMENTAL_NUMBER	0
+
+#define	EPI_BUILD_NUMBER	0
+
+#define	EPI_VERSION		3,130,20,0
+
+#define	EPI_VERSION_NUM		0x03821400
+
+/* Driver Version String, ASCII, 32 chars max */
+#define	EPI_VERSION_STR		"3.130.20.0"
+#define	EPI_ROUTER_VERSION_STR	"3.131.20.0"
+
+#endif /* _epivers_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/epivers.h.in linux.dev/arch/mips/bcm947xx/include/epivers.h.in
--- linux.old/arch/mips/bcm947xx/include/epivers.h.in	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/epivers.h.in	2005-11-07 21:57:07.849586000 +0100
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ *
+*/
+
+#ifndef _epivers_h_
+#define _epivers_h_
+
+#ifdef	linux
+#include <linux/config.h>
+#endif
+
+/* Vendor Name, ASCII, 32 chars max */
+#ifdef COMPANYNAME
+#define	HPNA_VENDOR 		COMPANYNAME
+#else
+#define	HPNA_VENDOR 		"Broadcom Corporation"
+#endif
+
+/* Driver Date, ASCII, 32 chars max */
+#define HPNA_DRV_BUILD_DATE	__DATE__
+
+/* Hardware Manufacture Date, ASCII, 32 chars max */
+#define HPNA_HW_MFG_DATE	"Not Specified"
+
+/* See documentation for Device Type values, 32 values max */
+#ifndef	HPNA_DEV_TYPE
+
+#if	defined(CONFIG_BRCM_VJ)
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
+
+#elif	defined(CONFIG_BCRM_93725)
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
+
+#else
+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
+
+#endif
+
+#endif	/* !HPNA_DEV_TYPE */
+
+
+#define	EPI_MAJOR_VERSION	@EPI_MAJOR_VERSION@
+
+#define	EPI_MINOR_VERSION	@EPI_MINOR_VERSION@
+
+#define	EPI_RC_NUMBER		@EPI_RC_NUMBER@
+
+#define	EPI_INCREMENTAL_NUMBER	@EPI_INCREMENTAL_NUMBER@
+
+#define	EPI_BUILD_NUMBER	@EPI_BUILD_NUMBER@
+
+#define	EPI_VERSION		@EPI_VERSION@
+
+#define	EPI_VERSION_NUM		@EPI_VERSION_NUM@
+
+/* Driver Version String, ASCII, 32 chars max */
+#define	EPI_VERSION_STR		"@EPI_VERSION_STR@"
+#define	EPI_ROUTER_VERSION_STR	"@EPI_ROUTER_VERSION_STR@"
+
+#endif /* _epivers_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/etsockio.h linux.dev/arch/mips/bcm947xx/include/etsockio.h
--- linux.old/arch/mips/bcm947xx/include/etsockio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/etsockio.h	2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,59 @@
+/*
+ * Driver-specific socket ioctls
+ * used by BSD, Linux, and PSOS
+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _etsockio_h_
+#define _etsockio_h_
+
+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
+
+
+#if defined(linux)
+#define SIOCSETCUP		(SIOCDEVPRIVATE + 0)
+#define SIOCSETCDOWN		(SIOCDEVPRIVATE + 1)
+#define SIOCSETCLOOP		(SIOCDEVPRIVATE + 2)
+#define SIOCGETCDUMP		(SIOCDEVPRIVATE + 3)
+#define SIOCSETCSETMSGLEVEL	(SIOCDEVPRIVATE + 4)
+#define SIOCSETCPROMISC		(SIOCDEVPRIVATE + 5)
+#define SIOCSETCTXDOWN		(SIOCDEVPRIVATE + 6)	/* obsolete */
+#define SIOCSETCSPEED		(SIOCDEVPRIVATE + 7)
+#define SIOCTXGEN		(SIOCDEVPRIVATE + 8)
+#define SIOCGETCPHYRD		(SIOCDEVPRIVATE + 9)
+#define SIOCSETCPHYWR		(SIOCDEVPRIVATE + 10)
+#define SIOCSETCQOS		(SIOCDEVPRIVATE + 11)
+
+#else	/* !linux */
+
+#define SIOCSETCUP		_IOWR('e', 130 + 0, struct ifreq)
+#define SIOCSETCDOWN		_IOWR('e', 130 + 1, struct ifreq)
+#define SIOCSETCLOOP		_IOWR('e', 130 + 2, struct ifreq)
+#define SIOCGETCDUMP		_IOWR('e', 130 + 3, struct ifreq)
+#define SIOCSETCSETMSGLEVEL	_IOWR('e', 130 + 4, struct ifreq)
+#define SIOCSETCPROMISC		_IOWR('e', 130 + 5, struct ifreq)
+#define SIOCSETCTXDOWN		_IOWR('e', 130 + 6, struct ifreq)	/* obsolete */
+#define SIOCSETCSPEED		_IOWR('e', 130 + 7, struct ifreq)
+#define SIOCTXGEN		_IOWR('e', 130 + 8, struct ifreq)
+
+#endif
+
+/* arg to SIOCTXGEN */
+struct txg {
+	uint32 num;		/* number of frames to send */
+	uint32 delay;		/* delay in microseconds between sending each */
+	uint32 size;		/* size of ether frame to send */
+	uchar buf[1514];	/* starting ether frame data */
+};
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h
--- linux.old/arch/mips/bcm947xx/include/flash.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/flash.h	2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,188 @@
+/*
+ * flash.h: Common definitions for flash access.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+/* Types of flashes we know about */
+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t;
+
+/* Commands to write/erase the flases */
+typedef struct _flash_cmds{
+	flash_type_t	type;
+	bool		need_unlock;
+	uint16		pre_erase;
+	uint16		erase_block;
+	uint16		erase_chip;
+	uint16		write_word;
+	uint16		write_buf;
+	uint16		clear_csr;
+	uint16		read_csr;
+	uint16		read_id;
+	uint16		confirm;
+	uint16		read_array;
+} flash_cmds_t;
+
+#define	UNLOCK_CMD_WORDS	2
+
+typedef struct _unlock_cmd {
+  uint		addr[UNLOCK_CMD_WORDS];
+  uint16	cmd[UNLOCK_CMD_WORDS];
+} unlock_cmd_t;
+
+/* Flash descriptors */
+typedef struct _flash_desc {
+	uint16		mfgid;		/* Manufacturer Id */
+	uint16		devid;		/* Device Id */
+	uint		size;		/* Total size in bytes */
+	uint		width;		/* Device width in bytes */
+	flash_type_t	type;		/* Device type old, S, J */
+	uint		bsize;		/* Block size */
+	uint		nb;		/* Number of blocks */
+	uint		ff;		/* First full block */
+	uint		lf;		/* Last full block */
+	uint		nsub;		/* Number of subblocks */
+	uint		*subblocks;	/* Offsets for subblocks */
+	char		*desc;		/* Description */
+} flash_desc_t;
+
+
+#ifdef	DECLARE_FLASHES
+flash_cmds_t sflash_cmd_t = 
+	{ SFLASH,	0,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00 };
+
+flash_cmds_t flash_cmds[] = {
+/*	  type		needu	preera	eraseb	erasech	write	wbuf	clcsr	rdcsr	rdid	confrm	read */
+	{ BSC,		0,	0x00,	0x20,	0x00,	0x40,	0x00,	0x50,	0x70,	0x90,	0xd0,	0xff },
+	{ SCS,		0,	0x00,	0x20,	0x00,	0x40,	0xe8,	0x50,	0x70,	0x90,	0xd0,	0xff },
+	{ AMD,		1,	0x80,	0x30,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
+	{ SST,		1,	0x80,	0x50,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
+	{ 0 }
+};
+
+unlock_cmd_t unlock_cmd_amd = {
+#ifdef MIPSEB
+/* addr: */	{ 0x0aa8,	0x0556},
+#else
+/* addr: */	{ 0x0aaa,	0x0554},
+#endif
+/* data: */	{ 0xaa,		0x55}
+};
+
+unlock_cmd_t unlock_cmd_sst = {
+#ifdef MIPSEB
+/* addr: */	{ 0xaaa8,	0x5556},
+#else
+/* addr: */	{ 0xaaaa,	0x5554},
+#endif
+/* data: */	{ 0xaa,		0x55}
+};
+
+#define AMD_CMD 0xaaa
+#define SST_CMD 0xaaaa
+
+/* intel unlock block cmds */
+#define INTEL_UNLOCK1	0x60
+#define INTEL_UNLOCK2	0xD0
+
+/* Just eight blocks of 8KB byte each */
+
+uint blk8x8k[] = { 0x00000000,
+		   0x00002000,
+		   0x00004000,
+		   0x00006000,
+		   0x00008000,
+		   0x0000a000,
+		   0x0000c000,
+		   0x0000e000,
+		   0x00010000
+};
+
+/* Funky AMD arrangement for 29xx800's */
+uint amd800[] = { 0x00000000,		/* 16KB */
+		  0x00004000,		/* 32KB */
+		  0x0000c000,		/* 8KB */
+		  0x0000e000,		/* 8KB */
+		  0x00010000,		/* 8KB */
+		  0x00012000,		/* 8KB */
+		  0x00014000,		/* 32KB */
+		  0x0001c000,		/* 16KB */
+		  0x00020000
+};
+
+/* AMD arrangement for 29xx160's */
+uint amd4112[] = { 0x00000000,		/* 32KB */
+		   0x00008000,		/* 8KB */
+		   0x0000a000,		/* 8KB */
+		   0x0000c000,		/* 16KB */
+		   0x00010000
+};
+uint amd2114[] = { 0x00000000,		/* 16KB */
+		   0x00004000,		/* 8KB */
+		   0x00006000,		/* 8KB */
+		   0x00008000,		/* 32KB */
+		   0x00010000
+};
+
+
+flash_desc_t sflash_desc =  
+	{ 0, 0, 0, 0,	SFLASH, 0, 0,  0, 0,  0, NULL,    "SFLASH" };
+
+flash_desc_t flashes[] = {
+	{ 0x00b0, 0x00d0, 0x0200000, 2,	SCS, 0x10000, 32,  0, 31,  0, NULL,    "Intel 28F160S3/5 1Mx16" },
+	{ 0x00b0, 0x00d4, 0x0400000, 2,	SCS, 0x10000, 64,  0, 63,  0, NULL,    "Intel 28F320S3/5 2Mx16" },
+	{ 0x0089, 0x8890, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
+	{ 0x0089, 0x8891, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
+	{ 0x0089, 0x8896, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
+	{ 0x0089, 0x8897, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
+	{ 0x0089, 0x8898, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
+	{ 0x0089, 0x8899, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
+	{ 0x0089, 0x88C2, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
+	{ 0x0089, 0x88C3, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
+	{ 0x0089, 0x88C4, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
+	{ 0x0089, 0x88C5, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
+	{ 0x0089, 0x88CC, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
+	{ 0x0089, 0x88CD, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
+	{ 0x0089, 0x0014, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J5 2Mx16" },
+	{ 0x0089, 0x0015, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J5 4Mx16" },
+	{ 0x0089, 0x0016, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J3 2Mx16" },
+	{ 0x0089, 0x0017, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J3 4Mx16" },
+	{ 0x0089, 0x0018, 0x1000000, 2,	SCS, 0x20000, 128, 0, 127, 0, NULL,    "Intel 28F128J3 8Mx16" },
+	{ 0x00b0, 0x00e3, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
+	{ 0x0001, 0x224a, 0x0100000, 2,	AMD, 0x10000, 16,  0, 13,  8, amd800,  "AMD 29DL800BT 512Kx16 TopB" },
+	{ 0x0001, 0x22cb, 0x0100000, 2,	AMD, 0x10000, 16,  2, 15,  8, amd800,  "AMD 29DL800BB 512Kx16 BotB" },
+	{ 0x0001, 0x22c4, 0x0200000, 2,	AMD, 0x10000, 32,  0, 30,  4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
+	{ 0x0001, 0x2249, 0x0200000, 2,	AMD, 0x10000, 32,  1, 31,  4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
+	{ 0x0001, 0x22f6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
+	{ 0x0001, 0x22f9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
+	{ 0x0001, 0x227e, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
+	{ 0x0001, 0x2200, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
+	{ 0x0020, 0x22CA, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "ST 29w320DT 2Mx16 TopB" },
+	{ 0x0020, 0x22CB, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "ST 29w320DB 2Mx16 BotB" },
+	{ 0x00C2, 0x00A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
+	{ 0x00C2, 0x00A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
+	{ 0x0004, 0x22F6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
+	{ 0x0004, 0x22F9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
+	{ 0x0098, 0x009A, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "TC58FVT321 2Mx16 TopB" },
+	{ 0x0098, 0x009C, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "TC58FVB321 2Mx16 BotB" }, 
+	{ 0x00C2, 0x22A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
+	{ 0x00C2, 0x22A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
+	{ 0x00BF, 0x2783, 0x0400000, 2,	SST, 0x10000, 64,  0, 63,  0, NULL,    "SST39VF320 2Mx16" },
+	{ 0,      0,      0,         0,	OLD, 0,       0,   0, 0,   0, NULL,    NULL },
+};
+
+#else
+
+extern flash_cmds_t flash_cmds[];
+extern unlock_cmd_t unlock_cmd;
+extern flash_desc_t flashes[];
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h
--- linux.old/arch/mips/bcm947xx/include/flashutl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/flashutl.h	2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,27 @@
+/*
+ * BCM47XX FLASH driver interface
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef _flashutl_h_
+#define _flashutl_h_
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+int	sysFlashInit(char *flash_str);
+int sysFlashRead(uint off, uchar *dst, uint bytes);
+int sysFlashWrite(uint off, uchar *src, uint bytes);
+void nvWrite(unsigned short *data, unsigned int len);
+
+#endif	/* _LANGUAGE_ASSEMBLY */
+
+#endif /* _flashutl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/hnddma.h linux.dev/arch/mips/bcm947xx/include/hnddma.h
--- linux.old/arch/mips/bcm947xx/include/hnddma.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/hnddma.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,71 @@
+/*
+ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_hnddma_h_
+#define	_hnddma_h_
+
+/* export structure */
+typedef volatile struct {
+	/* rx error counters */
+	uint		rxgiants;	/* rx giant frames */
+	uint		rxnobuf;	/* rx out of dma descriptors */
+	/* tx error counters */
+	uint		txnobuf;	/* tx out of dma descriptors */
+} hnddma_t;
+
+#ifndef di_t
+#define	di_t	void
+#endif
+
+#ifndef osl_t 
+#define osl_t void
+#endif
+
+/* externs */
+extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx, 
+			 uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level);
+extern void dma_detach(di_t *di);
+extern void dma_txreset(di_t *di);
+extern void dma_rxreset(di_t *di);
+extern void dma_txinit(di_t *di);
+extern bool dma_txenabled(di_t *di);
+extern void dma_rxinit(di_t *di);
+extern void dma_rxenable(di_t *di);
+extern bool dma_rxenabled(di_t *di);
+extern void dma_txsuspend(di_t *di);
+extern void dma_txresume(di_t *di);
+extern bool dma_txsuspended(di_t *di);
+extern bool dma_txsuspendedidle(di_t *di);
+extern bool dma_txstopped(di_t *di);
+extern bool dma_rxstopped(di_t *di);
+extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
+extern void dma_fifoloopbackenable(di_t *di);
+extern void *dma_rx(di_t *di);
+extern void dma_rxfill(di_t *di);
+extern void dma_txreclaim(di_t *di, bool forceall);
+extern void dma_rxreclaim(di_t *di);
+extern uintptr dma_getvar(di_t *di, char *name);
+extern void *dma_getnexttxp(di_t *di, bool forceall);
+extern void *dma_peeknexttxp(di_t *di);
+extern void *dma_getnextrxp(di_t *di, bool forceall);
+extern void dma_txblock(di_t *di);
+extern void dma_txunblock(di_t *di);
+extern uint dma_txactive(di_t *di);
+extern void dma_txrotate(di_t *di);
+
+extern void dma_rxpiomode(dma32regs_t *);
+extern void dma_txpioloopback(dma32regs_t *);
+
+
+#endif	/* _hnddma_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
--- linux.old/arch/mips/bcm947xx/include/hndmips.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/hndmips.h	2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,16 @@
+/*
+ * Alternate include file for HND sbmips.h since CFE also ships with
+ * a sbmips.h.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include "sbmips.h"
diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h
--- linux.old/arch/mips/bcm947xx/include/linux_osl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h	2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,371 @@
+/*
+ * Linux OS Independent Layer
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _linux_osl_h_
+#define _linux_osl_h_
+
+#include <typedefs.h>
+
+/* use current 2.4.x calling conventions */
+#include <linuxver.h>
+
+/* assert and panic */
+#ifdef __GNUC__
+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#if GCC_VERSION > 30100
+#define	ASSERT(exp)		do {} while (0)
+#else
+/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/
+#define	ASSERT(exp)		
+#endif
+#endif
+
+/* microsecond delay */
+#define	OSL_DELAY(usec)		osl_delay(usec)
+extern void osl_delay(uint usec);
+
+/* PCMCIA attribute space access macros */
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+struct pcmcia_dev {
+	dev_link_t link;	/* PCMCIA device pointer */
+	dev_node_t node;	/* PCMCIA node structure */
+	void *base;		/* Mapped attribute memory window */
+	size_t size;		/* Size of window */
+	void *drv;		/* Driver data */
+};
+#endif
+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
+	osl_pcmcia_read_attr((osh), (offset), (buf), (size))
+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
+	osl_pcmcia_write_attr((osh), (offset), (buf), (size))
+extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size);
+extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size);
+
+/* PCI configuration space access macros */
+#define	OSL_PCI_READ_CONFIG(osh, offset, size) \
+	osl_pci_read_config((osh), (offset), (size))
+#define	OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
+	osl_pci_write_config((osh), (offset), (size), (val))
+extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset);
+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
+
+/* PCI device bus # and slot # */
+#define OSL_PCI_BUS(osh)	osl_pci_bus(osh)
+#define OSL_PCI_SLOT(osh)	osl_pci_slot(osh)
+extern uint osl_pci_bus(osl_t *osh);
+extern uint osl_pci_slot(osl_t *osh);
+
+/* OSL initialization */
+extern osl_t *osl_attach(void *pdev);
+extern void osl_detach(osl_t *osh);
+
+/* host/bus architecture-specific byte swap */
+#define BUS_SWAP32(v)		(v)
+
+/* general purpose memory allocation */
+
+#if defined(BCMDBG_MEM)
+
+#define	MALLOC(osh, size)	osl_debug_malloc((osh), (size), __LINE__, __FILE__)
+#define	MFREE(osh, addr, size)	osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__)
+#define MALLOCED(osh)		osl_malloced((osh))
+#define	MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz))
+extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file);
+extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file);
+extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz);
+
+#else
+
+#define	MALLOC(osh, size)	osl_malloc((osh), (size))
+#define	MFREE(osh, addr, size)	osl_mfree((osh), (addr), (size))
+#define MALLOCED(osh)		osl_malloced((osh))
+
+#endif	/* BCMDBG_MEM */
+
+#define	MALLOC_FAILED(osh)	osl_malloc_failed((osh))
+
+extern void *osl_malloc(osl_t *osh, uint size);
+extern void osl_mfree(osl_t *osh, void *addr, uint size);
+extern uint osl_malloced(osl_t *osh);
+extern uint osl_malloc_failed(osl_t *osh);
+
+/* allocate/free shared (dma-able) consistent memory */
+#define	DMA_CONSISTENT_ALIGN	PAGE_SIZE
+#define	DMA_ALLOC_CONSISTENT(osh, size, pap) \
+	osl_dma_alloc_consistent((osh), (size), (pap))
+#define	DMA_FREE_CONSISTENT(osh, va, size, pa) \
+	osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
+
+/* map/unmap direction */
+#define	DMA_TX	1
+#define	DMA_RX	2
+
+/* map/unmap shared (dma-able) memory */
+#define	DMA_MAP(osh, va, size, direction, p) \
+	osl_dma_map((osh), (va), (size), (direction))
+#define	DMA_UNMAP(osh, pa, size, direction, p) \
+	osl_dma_unmap((osh), (pa), (size), (direction))
+extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction);
+extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction);
+
+/* register access macros */
+#if defined(BCMJTAG)
+#include <bcmjtag.h>
+#define	R_REG(r)	bcmjtag_read(NULL, (uint32)(r), sizeof (*(r)))
+#define	W_REG(r, v)	bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r)))
+#endif
+
+/*
+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
+ * Macros expand to calls to functions defined in linux_osl.c .
+ */
+#ifndef BINOSL
+
+/* string library, kernel mode */
+#define	printf(fmt, args...)	printk(fmt, ## args)
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+/* register access macros */
+#if !defined(BCMJTAG)
+#ifndef IL_BIGENDIAN   
+#define R_REG(r) ( \
+	sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
+	sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
+	readl((volatile uint32*)(r)) \
+)
+#define W_REG(r, v) do { \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)(r)); break; \
+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)(r)); break; \
+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
+	} \
+} while (0)
+#else	/* IL_BIGENDIAN */
+#define R_REG(r) ({ \
+	__typeof(*(r)) __osl_v; \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	__osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
+	case sizeof(uint16):	__osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
+	case sizeof(uint32):	__osl_v = readl((volatile uint32*)(r)); break; \
+	} \
+	__osl_v; \
+})
+#define W_REG(r, v) do { \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
+	} \
+} while (0)
+#endif
+#endif
+
+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
+
+/* bcopy, bcmp, and bzero */
+#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
+#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
+#define	bzero(b, len)		memset((b), '\0', (len))
+
+/* uncached virtual address */
+#ifdef mips
+#define OSL_UNCACHED(va)	KSEG1ADDR((va))
+#include <asm/addrspace.h>
+#else
+#define OSL_UNCACHED(va)	(va)
+#endif
+
+/* get processor cycle count */
+#if defined(mips)
+#define	OSL_GETCYCLES(x)	((x) = read_c0_count() * 2)
+#elif defined(__i386__)
+#define	OSL_GETCYCLES(x)	rdtscl((x))
+#else
+#define OSL_GETCYCLES(x)	((x) = 0)
+#endif
+
+/* dereference an address that may cause a bus exception */
+#ifdef mips
+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
+#define BUSPROBE(val, addr)	panic("get_dbe() will not fixup a bus exception when compiled into a module")
+#else
+#define	BUSPROBE(val, addr)	get_dbe((val), (addr))
+#include <asm/paccess.h>
+#endif
+#else
+#define	BUSPROBE(val, addr)	({ (val) = R_REG((addr)); 0; })
+#endif
+
+/* map/unmap physical to virtual I/O */
+#define	REG_MAP(pa, size)	ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
+#define	REG_UNMAP(va)		iounmap((void *)(va))
+
+/* shared (dma-able) memory access macros */
+#define	R_SM(r)			*(r)
+#define	W_SM(r, v)		(*(r) = (v))
+#define	BZERO_SM(r, len)	memset((r), '\0', (len))
+
+/* packet primitives */
+#define	PKTGET(osh, len, send)		osl_pktget((osh), (len), (send))
+#define	PKTFREE(osh, skb, send)		osl_pktfree((skb))
+#define	PKTDATA(osh, skb)		(((struct sk_buff*)(skb))->data)
+#define	PKTLEN(osh, skb)		(((struct sk_buff*)(skb))->len)
+#define PKTHEADROOM(osh, skb)		(PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head))
+#define PKTTAILROOM(osh, skb)		((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
+#define	PKTNEXT(osh, skb)		(((struct sk_buff*)(skb))->next)
+#define	PKTSETNEXT(skb, x)		(((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
+#define	PKTSETLEN(osh, skb, len)	__skb_trim((struct sk_buff*)(skb), (len))
+#define	PKTPUSH(osh, skb, bytes)	skb_push((struct sk_buff*)(skb), (bytes))
+#define	PKTPULL(osh, skb, bytes)	skb_pull((struct sk_buff*)(skb), (bytes))
+#define	PKTDUP(osh, skb)		skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
+#define	PKTCOOKIE(skb)			((void*)((struct sk_buff*)(skb))->csum)
+#define	PKTSETCOOKIE(skb, x)		(((struct sk_buff*)(skb))->csum = (uint)(x))
+#define	PKTLINK(skb)			(((struct sk_buff*)(skb))->prev)
+#define	PKTSETLINK(skb, x)		(((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
+#define	PKTPRIO(skb)			(((struct sk_buff*)(skb))->priority)
+#define	PKTSETPRIO(skb, x)		(((struct sk_buff*)(skb))->priority = (x))
+extern void *osl_pktget(osl_t *osh, uint len, bool send);
+extern void osl_pktfree(void *skb);
+
+#else	/* BINOSL */                                    
+
+/* string library */
+#ifndef LINUX_OSL
+#undef printf
+#define	printf(fmt, args...)		osl_printf((fmt), ## args)
+#undef sprintf
+#define sprintf(buf, fmt, args...)	osl_sprintf((buf), (fmt), ## args)
+#undef strcmp
+#define	strcmp(s1, s2)			osl_strcmp((s1), (s2))
+#undef strncmp
+#define	strncmp(s1, s2, n)		osl_strncmp((s1), (s2), (n))
+#undef strlen
+#define strlen(s)			osl_strlen((s))
+#undef strcpy
+#define	strcpy(d, s)			osl_strcpy((d), (s))
+#undef strncpy
+#define	strncpy(d, s, n)		osl_strncpy((d), (s), (n))
+#endif
+extern int osl_printf(const char *format, ...);
+extern int osl_sprintf(char *buf, const char *format, ...);
+extern int osl_strcmp(const char *s1, const char *s2);
+extern int osl_strncmp(const char *s1, const char *s2, uint n);
+extern int osl_strlen(const char *s);
+extern char* osl_strcpy(char *d, const char *s);
+extern char* osl_strncpy(char *d, const char *s, uint n);
+
+/* register access macros */
+#if !defined(BCMJTAG)
+#define R_REG(r) ( \
+	sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \
+	sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \
+	osl_readl((volatile uint32*)(r)) \
+)
+#define W_REG(r, v) do { \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
+	case sizeof(uint16):	osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
+	case sizeof(uint32):	osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
+	} \
+} while (0)
+#endif
+
+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
+extern uint8 osl_readb(volatile uint8 *r);
+extern uint16 osl_readw(volatile uint16 *r);
+extern uint32 osl_readl(volatile uint32 *r);
+extern void osl_writeb(uint8 v, volatile uint8 *r);
+extern void osl_writew(uint16 v, volatile uint16 *r);
+extern void osl_writel(uint32 v, volatile uint32 *r);
+
+/* bcopy, bcmp, and bzero */
+extern void bcopy(const void *src, void *dst, int len);
+extern int bcmp(const void *b1, const void *b2, int len);
+extern void bzero(void *b, int len);
+
+/* uncached virtual address */
+#define OSL_UNCACHED(va)	osl_uncached((va))
+extern void *osl_uncached(void *va);
+
+/* get processor cycle count */
+#define OSL_GETCYCLES(x)	((x) = osl_getcycles())
+extern uint osl_getcycles(void);
+
+/* dereference an address that may target abort */
+#define	BUSPROBE(val, addr)	osl_busprobe(&(val), (addr))
+extern int osl_busprobe(uint32 *val, uint32 addr);
+
+/* map/unmap physical to virtual */
+#define	REG_MAP(pa, size)	osl_reg_map((pa), (size))
+#define	REG_UNMAP(va)		osl_reg_unmap((va))
+extern void *osl_reg_map(uint32 pa, uint size);
+extern void osl_reg_unmap(void *va);
+
+/* shared (dma-able) memory access macros */
+#define	R_SM(r)			*(r)
+#define	W_SM(r, v)		(*(r) = (v))
+#define	BZERO_SM(r, len)	bzero((r), (len))
+
+/* packet primitives */
+#define	PKTGET(osh, len, send)		osl_pktget((osh), (len), (send))
+#define	PKTFREE(osh, skb, send)		osl_pktfree((skb))
+#define	PKTDATA(osh, skb)		osl_pktdata((osh), (skb))
+#define	PKTLEN(osh, skb)		osl_pktlen((osh), (skb))
+#define PKTHEADROOM(osh, skb)		osl_pktheadroom((osh), (skb))
+#define PKTTAILROOM(osh, skb)		osl_pkttailroom((osh), (skb))
+#define	PKTNEXT(osh, skb)		osl_pktnext((osh), (skb))
+#define	PKTSETNEXT(skb, x)		osl_pktsetnext((skb), (x))
+#define	PKTSETLEN(osh, skb, len)	osl_pktsetlen((osh), (skb), (len))
+#define	PKTPUSH(osh, skb, bytes)	osl_pktpush((osh), (skb), (bytes))
+#define	PKTPULL(osh, skb, bytes)	osl_pktpull((osh), (skb), (bytes))
+#define	PKTDUP(osh, skb)		osl_pktdup((osh), (skb))
+#define	PKTCOOKIE(skb)			osl_pktcookie((skb))
+#define	PKTSETCOOKIE(skb, x)		osl_pktsetcookie((skb), (x))
+#define	PKTLINK(skb)			osl_pktlink((skb))
+#define	PKTSETLINK(skb, x)		osl_pktsetlink((skb), (x))
+#define	PKTPRIO(skb)			osl_pktprio((skb))
+#define	PKTSETPRIO(skb, x)		osl_pktsetprio((skb), (x))
+extern void *osl_pktget(osl_t *osh, uint len, bool send);
+extern void osl_pktfree(void *skb);
+extern uchar *osl_pktdata(osl_t *osh, void *skb);
+extern uint osl_pktlen(osl_t *osh, void *skb);
+extern uint osl_pktheadroom(osl_t *osh, void *skb);
+extern uint osl_pkttailroom(osl_t *osh, void *skb);
+extern void *osl_pktnext(osl_t *osh, void *skb);
+extern void osl_pktsetnext(void *skb, void *x);
+extern void osl_pktsetlen(osl_t *osh, void *skb, uint len);
+extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes);
+extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes);
+extern void *osl_pktdup(osl_t *osh, void *skb);
+extern void *osl_pktcookie(void *skb);
+extern void osl_pktsetcookie(void *skb, void *x);
+extern void *osl_pktlink(void *skb);
+extern void osl_pktsetlink(void *skb, void *x);
+extern uint osl_pktprio(void *skb);
+extern void osl_pktsetprio(void *skb, uint x);
+
+#endif	/* BINOSL */
+
+#define OSL_ERROR(bcmerror)	osl_error(bcmerror)
+extern int osl_error(int bcmerror);
+
+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
+#define	PKTBUFSZ	2048
+
+#endif	/* _linux_osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
--- linux.old/arch/mips/bcm947xx/include/linuxver.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/linuxver.h	2005-11-07 22:51:38.780726250 +0100
@@ -0,0 +1,411 @@
+/*
+ * Linux-specific abstractions to gain some independence from linux kernel versions.
+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *   
+ * $Id$
+ */
+
+#ifndef _linuxver_h_
+#define _linuxver_h_
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
+#ifdef __UNDEF_NO_VERSION__
+#undef __NO_VERSION__
+#else
+#define __NO_VERSION__
+#endif
+#endif
+
+#if defined(MODULE) && defined(MODVERSIONS)
+#include <linux/modversions.h>
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <linux/moduleparam.h>
+#endif
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) 
+#define module_param(_name_, _type_, _perm_)	MODULE_PARM(_name_, "i")	
+#define module_param_string(_name_, _string_, _size_, _perm_)	MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
+#endif
+
+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
+#include <linux/malloc.h>
+#else
+#include <linux/slab.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41))
+#include <linux/workqueue.h>
+#else
+#include <linux/tqueue.h>
+#ifndef work_struct
+#define work_struct tq_struct
+#endif
+#ifndef INIT_WORK
+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
+#endif
+#ifndef schedule_work
+#define schedule_work(_work) schedule_task((_work))
+#endif
+#ifndef flush_scheduled_work
+#define flush_scheduled_work() flush_scheduled_tasks()
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+/* Some distributions have their own 2.6.x compatibility layers */
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+#else
+typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
+#endif
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69))
+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
+ * does this, but it's not in 2.4 so we do our own for now. */
+static inline void
+cs_error(client_handle_t handle, int func, int ret)
+{
+	error_info_t err = { func, ret };
+	CardServices(ReportError, handle, &err);
+}
+#endif
+
+#endif /* CONFIG_PCMCIA */
+
+#ifndef __exit
+#define __exit
+#endif
+#ifndef __devexit
+#define __devexit
+#endif
+#ifndef __devinit
+#define __devinit	__init
+#endif
+#ifndef __devinitdata
+#define __devinitdata
+#endif
+#ifndef __devexit_p
+#define __devexit_p(x)	x
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+
+#define pci_get_drvdata(dev)		(dev)->sysdata
+#define pci_set_drvdata(dev, value)	(dev)->sysdata=(value)
+
+/*
+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
+ */
+
+struct pci_device_id {
+	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
+	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
+	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
+	unsigned long driver_data;		/* Data private to the driver */
+};
+
+struct pci_driver {
+	struct list_head node;
+	char *name;
+	const struct pci_device_id *id_table;	/* NULL if wants all devices */
+	int (*probe)(struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
+	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
+	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
+	void (*resume)(struct pci_dev *dev);	/* Device woken up */
+};
+
+#define MODULE_DEVICE_TABLE(type, name)
+#define PCI_ANY_ID (~0)
+
+/* compatpci.c */
+#define pci_module_init pci_register_driver
+extern int pci_register_driver(struct pci_driver *drv);
+extern void pci_unregister_driver(struct pci_driver *drv);
+
+#endif /* PCI registration */
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
+#ifdef MODULE
+#define module_init(x) int init_module(void) { return x(); }
+#define module_exit(x) void cleanup_module(void) { x(); }
+#else
+#define module_init(x)	__initcall(x);
+#define module_exit(x)	__exitcall(x);
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
+#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
+#define pci_enable_device(dev) do { } while (0)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
+#define net_device device
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
+
+/*
+ * DMA mapping
+ *
+ * See linux/Documentation/DMA-mapping.txt
+ */
+
+#ifndef PCI_DMA_TODEVICE
+#define	PCI_DMA_TODEVICE	1
+#define	PCI_DMA_FROMDEVICE	2
+#endif
+
+typedef u32 dma_addr_t;
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+					 dma_addr_t *dma_handle)
+{
+	void *ret;
+	int gfp = GFP_ATOMIC | GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+	return ret;
+}
+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+				       void *vaddr, dma_addr_t dma_handle)
+{
+	free_pages((unsigned long)vaddr, get_order(size));
+}
+#ifdef ILSIM
+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
+#else
+#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
+#define pci_unmap_single(cookie, address, size, dir)
+#endif
+
+#endif /* DMA mapping */
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
+
+#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
+#define netif_down(dev)			do { (dev)->start = 0; } while(0)
+
+/* pcmcia-cs provides its own netdevice compatibility layer */
+#ifndef _COMPAT_NETDEVICE_H
+
+/*
+ * SoftNet
+ *
+ * For pre-softnet kernels we need to tell the upper layer not to
+ * re-enter start_xmit() while we are in there. However softnet
+ * guarantees not to enter while we are in there so there is no need
+ * to do the netif_stop_queue() dance unless the transmit queue really
+ * gets stuck. This should also improve performance according to tests
+ * done by Aman Singla.
+ */
+
+#define dev_kfree_skb_irq(a)		dev_kfree_skb(a)
+#define netif_wake_queue(dev)		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
+#define netif_stop_queue(dev)		set_bit(0, &(dev)->tbusy)
+
+static inline void netif_start_queue(struct net_device *dev)
+{
+	dev->tbusy = 0;
+	dev->interrupt = 0;
+	dev->start = 1;
+}
+
+#define netif_queue_stopped(dev)	(dev)->tbusy
+#define netif_running(dev)		(dev)->start
+
+#endif /* _COMPAT_NETDEVICE_H */
+
+#define netif_device_attach(dev)	netif_start_queue(dev)
+#define netif_device_detach(dev)	netif_stop_queue(dev)
+
+/* 2.4.x renamed bottom halves to tasklets */
+#define tasklet_struct				tq_struct
+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
+{
+	queue_task(tasklet, &tq_immediate);
+	mark_bh(IMMEDIATE_BH);
+}
+
+static inline void tasklet_init(struct tasklet_struct *tasklet,
+				void (*func)(unsigned long),
+				unsigned long data)
+{
+	tasklet->next = NULL;
+	tasklet->sync = 0;
+	tasklet->routine = (void (*)(void *))func;
+	tasklet->data = (void *)data;
+}
+#define tasklet_kill(tasklet)			{do{} while(0);}
+
+/* 2.4.x introduced del_timer_sync() */
+#define del_timer_sync(timer) del_timer(timer)
+
+#else
+
+#define netif_down(dev)
+
+#endif /* SoftNet */
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
+
+/*
+ * Emit code to initialise a tq_struct's routine and data pointers
+ */
+#define PREPARE_TQUEUE(_tq, _routine, _data)			\
+	do {							\
+		(_tq)->routine = _routine;			\
+		(_tq)->data = _data;				\
+	} while (0)
+
+/*
+ * Emit code to initialise all of a tq_struct
+ */
+#define INIT_TQUEUE(_tq, _routine, _data)			\
+	do {							\
+		INIT_LIST_HEAD(&(_tq)->list);			\
+		(_tq)->sync = 0;				\
+		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
+	} while (0)
+
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
+
+/* Power management related routines */
+
+static inline int
+pci_save_state(struct pci_dev *dev, u32 *buffer)
+{
+	int i;
+	if (buffer) {
+		for (i = 0; i < 16; i++)
+			pci_read_config_dword(dev, i * 4,&buffer[i]);
+	}
+	return 0;
+}
+
+static inline int 
+pci_restore_state(struct pci_dev *dev, u32 *buffer)
+{
+	int i;
+
+	if (buffer) {
+		for (i = 0; i < 16; i++)
+			pci_write_config_dword(dev,i * 4, buffer[i]);
+	}
+	/*
+	 * otherwise, write the context information we know from bootup.
+	 * This works around a problem where warm-booting from Windows
+	 * combined with a D3(hot)->D0 transition causes PCI config
+	 * header data to be forgotten.
+	 */	
+	else {
+		for (i = 0; i < 6; i ++)
+			pci_write_config_dword(dev,
+					       PCI_BASE_ADDRESS_0 + (i * 4),
+					       pci_resource_start(dev, i));
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	}
+	return 0;
+}
+
+#endif /* PCI power management */
+
+/* Old cp0 access macros deprecated in 2.4.19 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
+#endif
+
+/* Module refcount handled internally in 2.6.x */
+#ifndef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev)		do {} while (0)
+#define OLD_MOD_INC_USE_COUNT		MOD_INC_USE_COUNT
+#define OLD_MOD_DEC_USE_COUNT		MOD_DEC_USE_COUNT
+#else
+#define OLD_MOD_INC_USE_COUNT		do {} while (0)
+#define OLD_MOD_DEC_USE_COUNT		do {} while (0)
+#endif
+
+#ifndef SET_NETDEV_DEV
+#define SET_NETDEV_DEV(net, pdev)	do {} while (0)
+#endif
+
+#ifndef HAVE_FREE_NETDEV
+#define free_netdev(dev)		kfree(dev)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+/* struct packet_type redefined in 2.6.x */
+#define af_packet_priv			data
+#endif
+
+#endif /* _linuxver_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/min_osl.h linux.dev/arch/mips/bcm947xx/include/min_osl.h
--- linux.old/arch/mips/bcm947xx/include/min_osl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/min_osl.h	2005-11-07 22:51:38.780726250 +0100
@@ -0,0 +1,126 @@
+/*
+ * HND Minimal OS Abstraction Layer.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _min_osl_h_
+#define _min_osl_h_
+
+#include <typedefs.h>
+#include <sbconfig.h>
+#include <mipsinc.h>
+
+/* Cache support */
+extern void caches_on(void);
+extern void blast_dcache(void);
+extern void blast_icache(void);
+
+/* uart output */
+extern void putc(int c);
+
+/* lib functions */
+extern int printf(const char *fmt, ...);
+extern int sprintf(char *buf, const char *fmt, ...);
+extern int strcmp(const char *s1, const char *s2);
+extern int strncmp(const char *s1, const char *s2, uint n);
+extern char *strcpy(char *dest, const char *src);
+extern char *strncpy(char *dest, const char *src, uint n);
+extern uint strlen(const char *s);
+extern char *strchr(const char *str,int c);
+extern char *strrchr(const char *str, int c);
+extern char *strcat(char *d, const char *s);
+extern void *memset(void *dest, int c, uint n);
+extern void *memcpy(void *dest, const void *src, uint n);
+extern int memcmp(const void *s1, const void *s2, uint n);
+#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
+#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
+#define	bzero(b, len)		memset((b), '\0', (len))
+
+/* assert & debugging */
+#define	ASSERT(exp)		do {} while (0)
+
+/* PCMCIA attribute space access macros */
+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
+	ASSERT(0)
+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
+	ASSERT(0)
+
+/* PCI configuration space access macros */
+#define	OSL_PCI_READ_CONFIG(loc, offset, size) \
+	(offset == 8 ? 0 : 0xffffffff)
+#define	OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
+	do {} while (0)
+
+/* PCI device bus # and slot # */
+#define OSL_PCI_BUS(osh)	(0)
+#define OSL_PCI_SLOT(osh)	(0)
+
+/* register access macros */
+#define wreg32(r, v)		(*(volatile uint32*)(r) = (uint32)(v))
+#define rreg32(r)		(*(volatile uint32*)(r))
+#define wreg16(r, v)		(*(volatile uint16*)(r) = (uint16)(v))
+#define rreg16(r)		(*(volatile uint16*)(r))
+#define wreg8(r, v)		(*(volatile uint8*)(r) = (uint8)(v))
+#define rreg8(r)		(*(volatile uint8*)(r))
+#define R_REG(r) ({ \
+	__typeof(*(r)) __osl_v; \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	__osl_v = rreg8((r)); break; \
+	case sizeof(uint16):	__osl_v = rreg16((r)); break; \
+	case sizeof(uint32):	__osl_v = rreg32((r)); break; \
+	} \
+	__osl_v; \
+})
+#define W_REG(r, v) do { \
+	switch (sizeof(*(r))) { \
+	case sizeof(uint8):	wreg8((r), (v)); break; \
+	case sizeof(uint16):	wreg16((r), (v)); break; \
+	case sizeof(uint32):	wreg32((r), (v)); break; \
+	} \
+} while (0)
+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
+
+/* general purpose memory allocation */
+#define	MALLOC(osh, size)	malloc(size)
+#define	MFREE(osh, addr, size)	free(addr)
+#define	MALLOCED(osh)		0
+#define	MALLOC_FAILED(osh)	0
+#define	MALLOC_DUMP(osh, buf, sz)
+extern int free(void *ptr);
+extern void *malloc(uint size);
+
+/* uncached virtual address */
+#define	OSL_UNCACHED(va)	((void*)KSEG1ADDR((ulong)(va)))
+
+/* host/bus architecture-specific address byte swap */
+#define BUS_SWAP32(v)		(v)
+
+/* microsecond delay */
+#define	OSL_DELAY(usec)		udelay(usec)
+extern void udelay(uint32 usec);
+
+/* map/unmap physical to virtual I/O */
+#define	REG_MAP(pa, size)	((void*)KSEG1ADDR((ulong)(pa)))
+#define	REG_UNMAP(va)		do {} while (0)
+
+/* dereference an address that may cause a bus exception */
+#define	BUSPROBE(val, addr)	(uint32 *)(addr) = (val)
+
+/* Misc stubs */
+#define osl_attach(pdev)	((osl_t*)pdev)
+#define osl_detach(osh)
+extern void *osl_init(void);
+#define OSL_ERROR(bcmerror)	osl_error(bcmerror)
+extern int osl_error(int);
+
+#endif	/* _min_osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
--- linux.old/arch/mips/bcm947xx/include/mipsinc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h	2005-11-07 22:51:38.780726250 +0100
@@ -0,0 +1,552 @@
+/*
+ * HND Run Time Environment for standalone MIPS programs.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef	_MISPINC_H
+#define _MISPINC_H
+
+
+/* MIPS defines */
+
+#ifdef	_LANGUAGE_ASSEMBLY
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero	$0	/* wired zero */
+#define AT	$1	/* assembler temp - uppercase because of ".set at" */
+#define v0	$2	/* return value */
+#define v1	$3
+#define a0	$4	/* argument registers */
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define t0	$8	/* caller saved */
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+#define s0	$16	/* callee saved */
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24	/* caller saved */
+#define t9	$25
+#define jp	$25	/* PIC jump register */
+#define k0	$26	/* kernel scratch */
+#define k1	$27
+#define gp	$28	/* global pointer */
+#define sp	$29	/* stack pointer */
+#define fp	$30	/* frame pointer */
+#define s8	$30	/* same like fp! */
+#define ra	$31	/* return address */
+
+
+/*
+ * CP0 Registers 
+ */
+
+#define C0_INX		$0
+#define C0_RAND		$1
+#define C0_TLBLO0	$2
+#define C0_TLBLO	C0_TLBLO0
+#define C0_TLBLO1	$3
+#define C0_CTEXT	$4
+#define C0_PGMASK	$5
+#define C0_WIRED	$6
+#define C0_BADVADDR	$8
+#define C0_COUNT 	$9
+#define C0_TLBHI	$10
+#define C0_COMPARE	$11
+#define C0_SR		$12
+#define C0_STATUS	C0_SR
+#define C0_CAUSE	$13
+#define C0_EPC		$14
+#define C0_PRID		$15
+#define C0_CONFIG	$16
+#define C0_LLADDR	$17
+#define C0_WATCHLO	$18
+#define C0_WATCHHI	$19
+#define C0_XCTEXT	$20
+#define C0_DIAGNOSTIC	$22
+#define C0_BROADCOM	C0_DIAGNOSTIC
+#define	C0_PERFORMANCE	$25
+#define C0_ECC		$26
+#define C0_CACHEERR	$27
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+#define C0_ERREPC	$30
+#define C0_DESAVE	$31
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol)				\
+		.globl	symbol;			\
+		.align	2;			\
+		.type	symbol,@function;	\
+		.ent	symbol,0;		\
+symbol:		.frame	sp,0,ra
+
+/*
+ * END - mark end of function
+ */
+#define END(function)				\
+		.end	function;		\
+		.size	function,.-function
+
+#define _ULCAST_
+
+#else
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+#define _ULCAST_ (unsigned long)
+
+
+/*
+ * CP0 Registers 
+ */
+
+#define C0_INX		0		/* CP0: TLB Index */
+#define C0_RAND		1		/* CP0: TLB Random */
+#define C0_TLBLO0	2		/* CP0: TLB EntryLo0 */
+#define C0_TLBLO	C0_TLBLO0	/* CP0: TLB EntryLo0 */
+#define C0_TLBLO1	3		/* CP0: TLB EntryLo1 */
+#define C0_CTEXT	4		/* CP0: Context */
+#define C0_PGMASK	5		/* CP0: TLB PageMask */
+#define C0_WIRED	6		/* CP0: TLB Wired */
+#define C0_BADVADDR	8		/* CP0: Bad Virtual Address */
+#define C0_COUNT 	9		/* CP0: Count */
+#define C0_TLBHI	10		/* CP0: TLB EntryHi */
+#define C0_COMPARE	11		/* CP0: Compare */
+#define C0_SR		12		/* CP0: Processor Status */
+#define C0_STATUS	C0_SR		/* CP0: Processor Status */
+#define C0_CAUSE	13		/* CP0: Exception Cause */
+#define C0_EPC		14		/* CP0: Exception PC */
+#define C0_PRID		15		/* CP0: Processor Revision Indentifier */
+#define C0_CONFIG	16		/* CP0: Config */
+#define C0_LLADDR	17		/* CP0: LLAddr */
+#define C0_WATCHLO	18		/* CP0: WatchpointLo */
+#define C0_WATCHHI	19		/* CP0: WatchpointHi */
+#define C0_XCTEXT	20		/* CP0: XContext */
+#define C0_DIAGNOSTIC	22		/* CP0: Diagnostic */
+#define C0_BROADCOM	C0_DIAGNOSTIC	/* CP0: Broadcom Register */
+#define	C0_PERFORMANCE	25		/* CP0: Performance Counter/Control Registers */
+#define C0_ECC		26		/* CP0: ECC */
+#define C0_CACHEERR	27		/* CP0: CacheErr */
+#define C0_TAGLO	28		/* CP0: TagLo */
+#define C0_TAGHI	29		/* CP0: TagHi */
+#define C0_ERREPC	30		/* CP0: ErrorEPC */
+#define C0_DESAVE	31		/* CP0: DebugSave */
+
+#endif	/* _LANGUAGE_ASSEMBLY */
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ */
+#undef KUSEG
+#undef KSEG0
+#undef KSEG1
+#undef KSEG2
+#undef KSEG3
+#define KUSEG		0x00000000
+#define KSEG0		0x80000000
+#define KSEG1		0xa0000000
+#define KSEG2		0xc0000000
+#define KSEG3		0xe0000000
+#define PHYSADDR_MASK	0x1fffffff
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#undef PHYSADDR
+#undef KSEG0ADDR
+#undef KSEG1ADDR
+#undef KSEG2ADDR
+#undef KSEG3ADDR
+
+#define PHYSADDR(a)	(_ULCAST_(a) & PHYSADDR_MASK)
+#define KSEG0ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
+#define KSEG1ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
+#define KSEG2ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
+#define KSEG3ADDR(a)	((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
+
+
+#ifndef	Index_Invalidate_I
+/*
+ * Cache Operations
+ */
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D	0x01
+#define Index_Invalidate_SI	0x02
+#define Index_Writeback_Inv_SD	0x03
+#define Index_Load_Tag_I	0x04
+#define Index_Load_Tag_D	0x05
+#define Index_Load_Tag_SI	0x06
+#define Index_Load_Tag_SD	0x07
+#define Index_Store_Tag_I	0x08
+#define Index_Store_Tag_D	0x09
+#define Index_Store_Tag_SI	0x0A
+#define Index_Store_Tag_SD	0x0B
+#define Create_Dirty_Excl_D	0x0d
+#define Create_Dirty_Excl_SD	0x0f
+#define Hit_Invalidate_I	0x10
+#define Hit_Invalidate_D	0x11
+#define Hit_Invalidate_SI	0x12
+#define Hit_Invalidate_SD	0x13
+#define Fill_I			0x14
+#define Hit_Writeback_Inv_D	0x15
+					/* 0x16 is unused */
+#define Hit_Writeback_Inv_SD	0x17
+#define R5K_Page_Invalidate_S	0x17
+#define Hit_Writeback_I		0x18
+#define Hit_Writeback_D		0x19
+					/* 0x1a is unused */
+#define Hit_Writeback_SD	0x1b
+					/* 0x1c is unused */
+					/* 0x1e is unused */
+#define Hit_Set_Virtual_SI	0x1e
+#define Hit_Set_Virtual_SD	0x1f
+#endif
+
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0			(_ULCAST_(1) <<  8)
+#define IE_SW1			(_ULCAST_(1) <<  9)
+#define IE_IRQ0			(_ULCAST_(1) << 10)
+#define IE_IRQ1			(_ULCAST_(1) << 11)
+#define IE_IRQ2			(_ULCAST_(1) << 12)
+#define IE_IRQ3			(_ULCAST_(1) << 13)
+#define IE_IRQ4			(_ULCAST_(1) << 14)
+#define IE_IRQ5			(_ULCAST_(1) << 15)
+
+#ifndef	ST0_UM
+/*
+ * Bitfields in the mips32 cp0 status register
+ */
+#define ST0_IE			0x00000001
+#define ST0_EXL			0x00000002
+#define ST0_ERL			0x00000004
+#define ST0_UM			0x00000010
+#define ST0_SWINT0		0x00000100
+#define ST0_SWINT1		0x00000200
+#define ST0_HWINT0		0x00000400
+#define ST0_HWINT1		0x00000800
+#define ST0_HWINT2		0x00001000
+#define ST0_HWINT3		0x00002000
+#define ST0_HWINT4		0x00004000
+#define ST0_HWINT5		0x00008000
+#define ST0_IM			0x0000ff00
+#define ST0_NMI			0x00080000
+#define ST0_SR			0x00100000
+#define ST0_TS			0x00200000
+#define ST0_BEV			0x00400000
+#define ST0_RE			0x02000000
+#define ST0_RP			0x08000000
+#define ST0_CU			0xf0000000
+#define ST0_CU0			0x10000000
+#define ST0_CU1			0x20000000
+#define ST0_CU2			0x40000000
+#define ST0_CU3			0x80000000
+#endif
+
+
+/*
+ * Bitfields in the mips32 cp0 cause register
+ */
+#define C_EXC			0x0000007c
+#define C_EXC_SHIFT		2
+#define C_INT			0x0000ff00
+#define C_INT_SHIFT		8
+#define C_SW0			(_ULCAST_(1) <<  8)
+#define C_SW1			(_ULCAST_(1) <<  9)
+#define C_IRQ0			(_ULCAST_(1) << 10)
+#define C_IRQ1			(_ULCAST_(1) << 11)
+#define C_IRQ2			(_ULCAST_(1) << 12)
+#define C_IRQ3			(_ULCAST_(1) << 13)
+#define C_IRQ4			(_ULCAST_(1) << 14)
+#define C_IRQ5			(_ULCAST_(1) << 15)
+#define C_WP			0x00400000
+#define C_IV			0x00800000
+#define C_CE			0x30000000
+#define C_CE_SHIFT		28
+#define C_BD			0x80000000
+
+/* Values in C_EXC */
+#define EXC_INT			0
+#define EXC_TLBM		1
+#define EXC_TLBL		2
+#define EXC_TLBS		3
+#define EXC_AEL			4
+#define EXC_AES			5
+#define EXC_IBE			6
+#define EXC_DBE			7
+#define EXC_SYS			8
+#define EXC_BPT			9
+#define EXC_RI			10
+#define EXC_CU			11
+#define EXC_OV			12
+#define EXC_TR			13
+#define EXC_WATCH		23
+#define EXC_MCHK		24
+
+
+/*
+ * Bits in the cp0 config register.
+ */
+#define CONF_CM_CACHABLE_NO_WA		0
+#define CONF_CM_CACHABLE_WA		1
+#define CONF_CM_UNCACHED		2
+#define CONF_CM_CACHABLE_NONCOHERENT	3
+#define CONF_CM_CACHABLE_CE		4
+#define CONF_CM_CACHABLE_COW		5
+#define CONF_CM_CACHABLE_CUW		6
+#define CONF_CM_CACHABLE_ACCELERATED	7
+#define CONF_CM_CMASK			7
+#define CONF_CU				(_ULCAST_(1) <<  3)
+#define CONF_DB				(_ULCAST_(1) <<  4)
+#define CONF_IB				(_ULCAST_(1) <<  5)
+#define CONF_SE				(_ULCAST_(1) << 12)
+#define CONF_SC				(_ULCAST_(1) << 17)
+#define CONF_AC				(_ULCAST_(1) << 23)
+#define CONF_HALT			(_ULCAST_(1) << 25)
+
+
+/*
+ * Bits in the cp0 config register select 1.
+ */
+#define CONF1_FP		0x00000001	/* FPU present */
+#define CONF1_EP		0x00000002	/* EJTAG present */
+#define CONF1_CA		0x00000004	/* mips16 implemented */
+#define CONF1_WR		0x00000008	/* Watch registers present */
+#define CONF1_PC		0x00000010	/* Performance counters present */
+#define CONF1_DA_SHIFT		7		/* D$ associativity */
+#define CONF1_DA_MASK		0x00000380
+#define CONF1_DA_BASE		1
+#define CONF1_DL_SHIFT		10		/* D$ line size */
+#define CONF1_DL_MASK		0x00001c00
+#define CONF1_DL_BASE		2
+#define CONF1_DS_SHIFT		13		/* D$ sets/way */
+#define CONF1_DS_MASK		0x0000e000
+#define CONF1_DS_BASE		64
+#define CONF1_IA_SHIFT		16		/* I$ associativity */
+#define CONF1_IA_MASK		0x00070000
+#define CONF1_IA_BASE		1
+#define CONF1_IL_SHIFT		19		/* I$ line size */
+#define CONF1_IL_MASK		0x00380000
+#define CONF1_IL_BASE		2
+#define CONF1_IS_SHIFT		22		/* Instruction cache sets/way */
+#define CONF1_IS_MASK		0x01c00000
+#define CONF1_IS_BASE		64
+#define CONF1_MS_MASK		0x7e000000	/* Number of tlb entries */
+#define CONF1_MS_SHIFT		25
+
+/* PRID register */
+#define PRID_COPT_MASK		0xff000000
+#define PRID_COMP_MASK		0x00ff0000
+#define PRID_IMP_MASK		0x0000ff00
+#define PRID_REV_MASK		0x000000ff
+
+#define PRID_COMP_LEGACY	0x000000
+#define PRID_COMP_MIPS		0x010000
+#define PRID_COMP_BROADCOM	0x020000
+#define PRID_COMP_ALCHEMY	0x030000
+#define PRID_COMP_SIBYTE	0x040000
+#define PRID_IMP_BCM4710	0x4000
+#define PRID_IMP_BCM3302	0x9000
+#define PRID_IMP_BCM3303	0x9100
+
+#define PRID_IMP_UNKNOWN	0xff00
+
+#define BCM330X(id) \
+	(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
+	|| ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
+
+/* Bits in C0_BROADCOM */
+#define BRCM_PFC_AVAIL		0x20000000	/* PFC is available */
+#define BRCM_DC_ENABLE		0x40000000	/* Enable Data $ */
+#define BRCM_IC_ENABLE		0x80000000	/* Enable Instruction $ */
+#define BRCM_PFC_ENABLE		0x00400000	/* Obsolete? Enable PFC (at least on 4310) */
+
+/* PreFetch Cache aka Read Ahead Cache */
+
+#define PFC_CR0			0xff400000	/* control reg 0 */
+#define PFC_CR1			0xff400004	/* control reg 1 */
+
+/* PFC operations */
+#define PFC_I			0x00000001	/* Enable PFC use for instructions */
+#define PFC_D			0x00000002	/* Enable PFC use for data */
+#define PFC_PFI			0x00000004	/* Enable seq. prefetch for instructions */
+#define PFC_PFD			0x00000008	/* Enable seq. prefetch for data */
+#define PFC_CINV		0x00000010	/* Enable selective (i/d) cacheop flushing */
+#define PFC_NCH			0x00000020	/* Disable flushing based on cacheops */
+#define PFC_DPF			0x00000040	/* Enable directional prefetching */
+#define PFC_FLUSH		0x00000100	/* Flush the PFC */
+#define PFC_BRR			0x40000000	/* Bus error indication */
+#define PFC_PWR			0x80000000	/* Disable power saving (clock gating) */
+
+/* Handy defaults */
+#define PFC_DISABLED		0
+#define PFC_AUTO			0xffffffff	/* auto select the default mode */
+#define PFC_INST		(PFC_I | PFC_PFI | PFC_CINV)
+#define PFC_INST_NOPF		(PFC_I | PFC_CINV)
+#define PFC_DATA		(PFC_D | PFC_PFD | PFC_CINV)
+#define PFC_DATA_NOPF		(PFC_D | PFC_CINV)
+#define PFC_I_AND_D		(PFC_INST | PFC_DATA)
+#define PFC_I_AND_D_NOPF	(PFC_INST_NOPF | PFC_DATA_NOPF)
+
+
+/* 
+ * These are the UART port assignments, expressed as offsets from the base
+ * register.  These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
+#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
+#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
+#define UART_LCR	3	/* Out: Line Control Register */
+#define UART_MCR	4	/* Out: Modem Control Register */
+#define UART_LSR	5	/* In:  Line Status Register */
+#define UART_MSR	6	/* In:  Modem Status Register */
+#define UART_SCR	7	/* I/O: Scratch Register */
+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
+#define UART_LCR_WLEN8	0x03	/* Wordlength: 8 bits */
+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
+#define UART_LSR_RXRDY	0x01	/* Receiver ready */
+
+
+#ifndef	_LANGUAGE_ASSEMBLY
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define MFC0(source, sel)					\
+({								\
+	int __res;						\
+	__asm__ __volatile__(					\
+	".set\tnoreorder\n\t"					\
+	".set\tnoat\n\t"					\
+	".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t"	\
+	"move\t%0,$1\n\t"					\
+	".set\tat\n\t"						\
+	".set\treorder"						\
+	:"=r" (__res)						\
+	:							\
+	:"$1");							\
+	__res;							\
+})
+
+#define MTC0(source, sel, value)				\
+do {								\
+	__asm__ __volatile__(					\
+	".set\tnoreorder\n\t"					\
+	".set\tnoat\n\t"					\
+	"move\t$1,%z0\n\t"					\
+	".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t"	\
+	".set\tat\n\t"						\
+	".set\treorder"						\
+	:							\
+	:"jr" (value)						\
+	:"$1");							\
+} while (0)
+
+#define get_c0_count()						\
+({								\
+	int __res;						\
+	__asm__ __volatile__(					\
+	".set\tnoreorder\n\t"					\
+	".set\tnoat\n\t"					\
+	"mfc0\t%0,$9\n\t"					\
+	".set\tat\n\t"						\
+	".set\treorder"						\
+	:"=r" (__res));						\
+	__res;							\
+})
+
+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
+{
+	uint lsz, sets, ways;
+
+	/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
+	if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
+		lsz = CONF1_IL_BASE << lsz;
+	sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
+	ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
+	*size = lsz * sets * ways;
+	*lsize = lsz;
+}
+
+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
+{
+	uint lsz, sets, ways;
+
+	/* Data Cache Size = Associativity * Line Size * Sets Per Way */
+	if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
+		lsz = CONF1_DL_BASE << lsz;
+	sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
+	ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
+	*size = lsz * sets * ways;
+	*lsize = lsz;
+}
+
+#define cache_op(base, op)			\
+	__asm__ __volatile__("			\
+		.set noreorder;			\
+		.set mips3;			\
+		cache %1, (%0);			\
+		.set mips0;			\
+		.set reorder"			\
+		:				\
+		: "r" (base),			\
+		  "i" (op));
+
+#define cache_unroll4(base, delta, op)		\
+	__asm__ __volatile__("			\
+		.set noreorder;			\
+		.set mips3;			\
+		cache %1,0(%0);			\
+		cache %1,delta(%0);		\
+		cache %1,(2 * delta)(%0);	\
+		cache %1,(3 * delta)(%0);	\
+		.set mips0;			\
+		.set reorder"			\
+		:				\
+		: "r" (base),			\
+		  "i" (op));
+
+#endif /* !_LANGUAGE_ASSEMBLY */
+
+#endif	/* _MISPINC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/nvports.h linux.dev/arch/mips/bcm947xx/include/nvports.h
--- linux.old/arch/mips/bcm947xx/include/nvports.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/nvports.h	2005-11-07 21:57:07.865587000 +0100
@@ -0,0 +1,55 @@
+/*
+ * BCM53xx RoboSwitch utility functions
+ *
+ * Copyright (C) 2002 Broadcom Corporation
+ * $Id$
+ */
+
+#ifndef _nvports_h_
+#define _nvports_h_
+
+#define uint32 unsigned long
+#define uint16 unsigned short
+#define uint unsigned int
+#define uint8 unsigned char
+#define uint64 unsigned long long
+
+enum FORCE_PORT {
+	FORCE_OFF,
+	FORCE_10H,
+	FORCE_10F,
+	FORCE_100H,
+	FORCE_100F,
+	FORCE_DOWN,
+	POWER_OFF
+};
+
+typedef struct _PORT_ATTRIBS
+{
+	uint 	autoneg;
+	uint	force;
+	uint	native;	
+} PORT_ATTRIBS;
+
+extern uint
+nvExistsPortAttrib(char *attrib, uint portno);
+
+extern int
+nvExistsAnyForcePortAttrib(uint portno);
+
+extern void
+nvSetPortAttrib(char *attrib, uint portno);
+
+extern void
+nvUnsetPortAttrib(char *attrib, uint portno);
+
+extern void
+nvUnsetAllForcePortAttrib(uint portno);
+
+extern PORT_ATTRIBS
+nvGetSwitchPortAttribs(uint portno);
+
+#endif /* _nvports_h_ */
+
+
+
diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
--- linux.old/arch/mips/bcm947xx/include/osl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/osl.h	2005-11-07 22:51:38.780726250 +0100
@@ -0,0 +1,42 @@
+/*
+ * OS Abstraction Layer
+ * 
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef _osl_h_
+#define _osl_h_
+
+/* osl handle type forward declaration */
+typedef struct os_handle osl_t;
+
+#if defined(linux)
+#include <linux_osl.h>
+#elif defined(NDIS)
+#include <ndis_osl.h>
+#elif defined(_CFE_)
+#include <cfe_osl.h>
+#elif defined(_HNDRTE_)
+#include <hndrte_osl.h>
+#elif defined(_MINOSL_)
+#include <min_osl.h>
+#elif PMON
+#include <pmon_osl.h>
+#elif defined(MACOSX)
+#include <macosx_osl.h>
+#else
+#error "Unsupported OSL requested"
+#endif
+
+/* handy */
+#define	SET_REG(r, mask, val)	W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+#define	MAXPRIO		7	/* 0-7 */
+
+#endif	/* _osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
--- linux.old/arch/mips/bcm947xx/include/pcicfg.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h	2005-11-07 22:51:38.780726250 +0100
@@ -0,0 +1,451 @@
+/*
+ * pcicfg.h: PCI configuration  constants and structures.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef	_h_pci_
+#define	_h_pci_
+
+/* The following inside ifndef's so we don't collide with NTDDK.H */
+#ifndef PCI_MAX_BUS
+#define PCI_MAX_BUS		0x100
+#endif
+#ifndef PCI_MAX_DEVICES
+#define PCI_MAX_DEVICES		0x20
+#endif
+#ifndef PCI_MAX_FUNCTION
+#define PCI_MAX_FUNCTION	0x8
+#endif
+
+#ifndef PCI_INVALID_VENDORID
+#define PCI_INVALID_VENDORID	0xffff
+#endif
+#ifndef PCI_INVALID_DEVICEID
+#define PCI_INVALID_DEVICEID	0xffff
+#endif
+
+
+/* Convert between bus-slot-function-register and config addresses */
+
+#define	PCICFG_BUS_SHIFT	16	/* Bus shift */
+#define	PCICFG_SLOT_SHIFT	11	/* Slot shift */
+#define	PCICFG_FUN_SHIFT	8	/* Function shift */
+#define	PCICFG_OFF_SHIFT	0	/* Register shift */
+
+#define	PCICFG_BUS_MASK		0xff	/* Bus mask */
+#define	PCICFG_SLOT_MASK	0x1f	/* Slot mask */
+#define	PCICFG_FUN_MASK		7	/* Function mask */
+#define	PCICFG_OFF_MASK		0xff	/* Bus mask */
+
+#define	PCI_CONFIG_ADDR(b, s, f, o)					\
+		((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT)		\
+		 | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT)	\
+		 | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT)	\
+		 | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
+
+#define	PCI_CONFIG_BUS(a)	(((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
+#define	PCI_CONFIG_SLOT(a)	(((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
+#define	PCI_CONFIG_FUN(a)	(((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
+#define	PCI_CONFIG_OFF(a)	(((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
+
+/* PCIE Config space accessing MACROS*/
+
+#define	PCIECFG_BUS_SHIFT	24	/* Bus shift */
+#define	PCIECFG_SLOT_SHIFT	19	/* Slot/Device shift */
+#define	PCIECFG_FUN_SHIFT	16	/* Function shift */
+#define	PCIECFG_OFF_SHIFT	0	/* Register shift */
+
+#define	PCIECFG_BUS_MASK	0xff	/* Bus mask */
+#define	PCIECFG_SLOT_MASK	0x1f	/* Slot/Device mask */
+#define	PCIECFG_FUN_MASK	7	/* Function mask */
+#define	PCIECFG_OFF_MASK	0x3ff	/* Register mask */
+
+#define	PCIE_CONFIG_ADDR(b, s, f, o)					\
+		((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT)		\
+		 | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT)	\
+		 | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT)	\
+		 | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
+
+#define	PCIE_CONFIG_BUS(a)	(((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
+#define	PCIE_CONFIG_SLOT(a)	(((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
+#define	PCIE_CONFIG_FUN(a)	(((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
+#define	PCIE_CONFIG_OFF(a)	(((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
+
+	
+/* The actual config space */
+
+#define	PCI_BAR_MAX		6
+
+#define	PCI_ROM_BAR		8
+
+#define	PCR_RSVDA_MAX		2
+
+/* pci config status reg has a bit to indicate that capability ptr is present*/
+
+#define PCI_CAPPTR_PRESENT	0x0010
+
+typedef struct _pci_config_regs {
+    unsigned short	vendor;
+    unsigned short	device;
+    unsigned short	command;
+    unsigned short	status;
+    unsigned char	rev_id;
+    unsigned char	prog_if;
+    unsigned char	sub_class;
+    unsigned char	base_class;
+    unsigned char	cache_line_size;
+    unsigned char	latency_timer;
+    unsigned char	header_type;
+    unsigned char	bist;
+    unsigned long	base[PCI_BAR_MAX];
+    unsigned long	cardbus_cis;
+    unsigned short	subsys_vendor;
+    unsigned short	subsys_id;
+    unsigned long	baserom;
+    unsigned long	rsvd_a[PCR_RSVDA_MAX];
+    unsigned char	int_line;
+    unsigned char	int_pin;
+    unsigned char	min_gnt;
+    unsigned char	max_lat;
+    unsigned char	dev_dep[192];
+} pci_config_regs;
+
+#define	SZPCR		(sizeof (pci_config_regs))
+#define	MINSZPCR	64		/* offsetof (dev_dep[0] */
+
+/* A structure for the config registers is nice, but in most
+ * systems the config space is not memory mapped, so we need
+ * filed offsetts. :-(
+ */
+#define	PCI_CFG_VID		0
+#define	PCI_CFG_DID		2
+#define	PCI_CFG_CMD		4
+#define	PCI_CFG_STAT		6
+#define	PCI_CFG_REV		8
+#define	PCI_CFG_PROGIF		9
+#define	PCI_CFG_SUBCL		0xa
+#define	PCI_CFG_BASECL		0xb
+#define	PCI_CFG_CLSZ		0xc
+#define	PCI_CFG_LATTIM		0xd
+#define	PCI_CFG_HDR		0xe
+#define	PCI_CFG_BIST		0xf
+#define	PCI_CFG_BAR0		0x10
+#define	PCI_CFG_BAR1		0x14
+#define	PCI_CFG_BAR2		0x18
+#define	PCI_CFG_BAR3		0x1c
+#define	PCI_CFG_BAR4		0x20
+#define	PCI_CFG_BAR5		0x24
+#define	PCI_CFG_CIS		0x28
+#define	PCI_CFG_SVID		0x2c
+#define	PCI_CFG_SSID		0x2e
+#define	PCI_CFG_ROMBAR		0x30
+#define PCI_CFG_CAPPTR		0x34
+#define	PCI_CFG_INT		0x3c
+#define	PCI_CFG_PIN		0x3d
+#define	PCI_CFG_MINGNT		0x3e
+#define	PCI_CFG_MAXLAT		0x3f
+
+/* Classes and subclasses */
+
+typedef enum {
+    PCI_CLASS_OLD = 0,
+    PCI_CLASS_DASDI,
+    PCI_CLASS_NET,
+    PCI_CLASS_DISPLAY,
+    PCI_CLASS_MMEDIA,
+    PCI_CLASS_MEMORY,
+    PCI_CLASS_BRIDGE,
+    PCI_CLASS_COMM,
+    PCI_CLASS_BASE,
+    PCI_CLASS_INPUT,
+    PCI_CLASS_DOCK,
+    PCI_CLASS_CPU,
+    PCI_CLASS_SERIAL,
+    PCI_CLASS_INTELLIGENT = 0xe,
+    PCI_CLASS_SATELLITE,
+    PCI_CLASS_CRYPT,
+    PCI_CLASS_DSP,
+    PCI_CLASS_MAX
+} pci_classes;
+
+typedef enum {
+    PCI_DASDI_SCSI,
+    PCI_DASDI_IDE,
+    PCI_DASDI_FLOPPY,
+    PCI_DASDI_IPI,
+    PCI_DASDI_RAID,
+    PCI_DASDI_OTHER = 0x80
+} pci_dasdi_subclasses;
+
+typedef enum {
+    PCI_NET_ETHER,
+    PCI_NET_TOKEN,
+    PCI_NET_FDDI,
+    PCI_NET_ATM,
+    PCI_NET_OTHER = 0x80
+} pci_net_subclasses;
+
+typedef enum {
+    PCI_DISPLAY_VGA,
+    PCI_DISPLAY_XGA,
+    PCI_DISPLAY_3D,
+    PCI_DISPLAY_OTHER = 0x80
+} pci_display_subclasses;
+
+typedef enum {
+    PCI_MMEDIA_VIDEO,
+    PCI_MMEDIA_AUDIO,
+    PCI_MMEDIA_PHONE,
+    PCI_MEDIA_OTHER = 0x80
+} pci_mmedia_subclasses;
+
+typedef enum {
+    PCI_MEMORY_RAM,
+    PCI_MEMORY_FLASH,
+    PCI_MEMORY_OTHER = 0x80
+} pci_memory_subclasses;
+
+typedef enum {
+    PCI_BRIDGE_HOST,
+    PCI_BRIDGE_ISA,
+    PCI_BRIDGE_EISA,
+    PCI_BRIDGE_MC,
+    PCI_BRIDGE_PCI,
+    PCI_BRIDGE_PCMCIA,
+    PCI_BRIDGE_NUBUS,
+    PCI_BRIDGE_CARDBUS,
+    PCI_BRIDGE_RACEWAY,
+    PCI_BRIDGE_OTHER = 0x80
+} pci_bridge_subclasses;
+
+typedef enum {
+    PCI_COMM_UART,
+    PCI_COMM_PARALLEL,
+    PCI_COMM_MULTIUART,
+    PCI_COMM_MODEM,
+    PCI_COMM_OTHER = 0x80
+} pci_comm_subclasses;
+
+typedef enum {
+    PCI_BASE_PIC,
+    PCI_BASE_DMA,
+    PCI_BASE_TIMER,
+    PCI_BASE_RTC,
+    PCI_BASE_PCI_HOTPLUG,
+    PCI_BASE_OTHER = 0x80
+} pci_base_subclasses;
+
+typedef enum {
+    PCI_INPUT_KBD,
+    PCI_INPUT_PEN,
+    PCI_INPUT_MOUSE,
+    PCI_INPUT_SCANNER,
+    PCI_INPUT_GAMEPORT,
+    PCI_INPUT_OTHER = 0x80
+} pci_input_subclasses;
+
+typedef enum {
+    PCI_DOCK_GENERIC,
+    PCI_DOCK_OTHER = 0x80
+} pci_dock_subclasses;
+
+typedef enum {
+    PCI_CPU_386,
+    PCI_CPU_486,
+    PCI_CPU_PENTIUM,
+    PCI_CPU_ALPHA = 0x10,
+    PCI_CPU_POWERPC = 0x20,
+    PCI_CPU_MIPS = 0x30,
+    PCI_CPU_COPROC = 0x40,
+    PCI_CPU_OTHER = 0x80
+} pci_cpu_subclasses;
+
+typedef enum {
+    PCI_SERIAL_IEEE1394,
+    PCI_SERIAL_ACCESS,
+    PCI_SERIAL_SSA,
+    PCI_SERIAL_USB,
+    PCI_SERIAL_FIBER,
+    PCI_SERIAL_SMBUS,
+    PCI_SERIAL_OTHER = 0x80
+} pci_serial_subclasses;
+
+typedef enum {
+    PCI_INTELLIGENT_I2O,
+} pci_intelligent_subclasses;
+
+typedef enum {
+    PCI_SATELLITE_TV,
+    PCI_SATELLITE_AUDIO,
+    PCI_SATELLITE_VOICE,
+    PCI_SATELLITE_DATA,
+    PCI_SATELLITE_OTHER = 0x80
+} pci_satellite_subclasses;
+
+typedef enum {
+    PCI_CRYPT_NETWORK,
+    PCI_CRYPT_ENTERTAINMENT,
+    PCI_CRYPT_OTHER = 0x80
+} pci_crypt_subclasses;
+
+typedef enum {
+    PCI_DSP_DPIO,
+    PCI_DSP_OTHER = 0x80
+} pci_dsp_subclasses;
+
+/* Header types */
+typedef enum {
+	PCI_HEADER_NORMAL,
+	PCI_HEADER_BRIDGE,
+	PCI_HEADER_CARDBUS
+} pci_header_types;
+
+
+/* Overlay for a PCI-to-PCI bridge */
+
+#define	PPB_RSVDA_MAX		2
+#define	PPB_RSVDD_MAX		8
+
+typedef struct _ppb_config_regs {
+    unsigned short	vendor;
+    unsigned short	device;
+    unsigned short	command;
+    unsigned short	status;
+    unsigned char	rev_id;
+    unsigned char	prog_if;
+    unsigned char	sub_class;
+    unsigned char	base_class;
+    unsigned char	cache_line_size;
+    unsigned char	latency_timer;
+    unsigned char	header_type;
+    unsigned char	bist;
+    unsigned long	rsvd_a[PPB_RSVDA_MAX];
+    unsigned char	prim_bus;
+    unsigned char	sec_bus;
+    unsigned char	sub_bus;
+    unsigned char	sec_lat;
+    unsigned char	io_base;
+    unsigned char	io_lim;
+    unsigned short	sec_status;
+    unsigned short	mem_base;
+    unsigned short	mem_lim;
+    unsigned short	pf_mem_base;
+    unsigned short	pf_mem_lim;
+    unsigned long	pf_mem_base_hi;
+    unsigned long	pf_mem_lim_hi;
+    unsigned short	io_base_hi;
+    unsigned short	io_lim_hi;
+    unsigned short	subsys_vendor;
+    unsigned short	subsys_id;
+    unsigned long	rsvd_b;
+    unsigned char	rsvd_c;
+    unsigned char	int_pin;
+    unsigned short	bridge_ctrl;
+    unsigned char	chip_ctrl;
+    unsigned char	diag_ctrl;
+    unsigned short	arb_ctrl;
+    unsigned long	rsvd_d[PPB_RSVDD_MAX];
+    unsigned char	dev_dep[192];
+} ppb_config_regs;
+
+
+/* PCI CAPABILITY DEFINES */
+#define PCI_CAP_POWERMGMTCAP_ID		0x01
+#define PCI_CAP_MSICAP_ID		0x05
+#define PCI_CAP_PCIECAP_ID		0x10
+
+/* Data structure to define the Message Signalled Interrupt facility 
+ * Valid for PCI and PCIE configurations */
+typedef struct _pciconfig_cap_msi {
+	unsigned char capID;
+	unsigned char nextptr;
+	unsigned short msgctrl;
+	unsigned int msgaddr;
+} pciconfig_cap_msi;
+
+/* Data structure to define the Power managment facility
+ * Valid for PCI and PCIE configurations */
+typedef struct _pciconfig_cap_pwrmgmt {
+	unsigned char capID;
+	unsigned char nextptr;
+	unsigned short pme_cap;
+	unsigned short  pme_sts_ctrl; 
+	unsigned char  pme_bridge_ext;
+	unsigned char  data;
+} pciconfig_cap_pwrmgmt;
+
+/* Data structure to define the PCIE capability */
+typedef struct _pciconfig_cap_pcie {
+	unsigned char capID;
+	unsigned char nextptr;
+	unsigned short pcie_cap;
+	unsigned int  dev_cap;
+	unsigned short dev_ctrl;
+	unsigned short dev_status;
+	unsigned int  link_cap;
+	unsigned short link_ctrl;
+	unsigned short link_status;
+} pciconfig_cap_pcie;
+
+/* PCIE Enhanced CAPABILITY DEFINES */
+#define PCIE_EXTCFG_OFFSET	0x100
+#define PCIE_ADVERRREP_CAPID	0x0001
+#define PCIE_VC_CAPID		0x0002
+#define PCIE_DEVSNUM_CAPID	0x0003
+#define PCIE_PWRBUDGET_CAPID	0x0004
+
+/* Header to define the PCIE specific capabilities in the extended config space */
+typedef struct _pcie_enhanced_caphdr {
+	unsigned short capID;
+	unsigned short cap_ver : 4;
+	unsigned short next_ptr : 12;
+} pcie_enhanced_caphdr;
+
+
+/* Everything below is BRCM HND proprietary */
+
+#define	PCI_BAR0_WIN		0x80	/* backplane addres space accessed by BAR0 */
+#define	PCI_BAR1_WIN		0x84	/* backplane addres space accessed by BAR1 */
+#define	PCI_SPROM_CONTROL	0x88	/* sprom property control */
+#define	PCI_BAR1_CONTROL	0x8c	/* BAR1 region burst control */
+#define	PCI_INT_STATUS		0x90	/* PCI and other cores interrupts */
+#define	PCI_INT_MASK		0x94	/* mask of PCI and other cores interrupts */
+#define PCI_TO_SB_MB		0x98	/* signal backplane interrupts */
+#define PCI_BACKPLANE_ADDR	0xA0	/* address an arbitrary location on the system backplane */
+#define PCI_BACKPLANE_DATA	0xA4	/* data at the location specified by above address register */
+#define	PCI_GPIO_IN		0xb0	/* pci config space gpio input (>=rev3) */
+#define	PCI_GPIO_OUT		0xb4	/* pci config space gpio output (>=rev3) */
+#define	PCI_GPIO_OUTEN		0xb8	/* pci config space gpio output enable (>=rev3) */
+
+#define	PCI_BAR0_SPROM_OFFSET	(4 * 1024)	/* bar0 + 4K accesses external sprom */
+#define	PCI_BAR0_PCIREGS_OFFSET	(6 * 1024)	/* bar0 + 6K accesses pci core registers */
+
+/* PCI_INT_STATUS */
+#define	PCI_SBIM_STATUS_SERR	0x4	/* backplane SBErr interrupt status */
+
+/* PCI_INT_MASK */
+#define	PCI_SBIM_SHIFT		8	/* backplane core interrupt mask bits offset */
+#define	PCI_SBIM_MASK		0xff00	/* backplane core interrupt mask */
+#define	PCI_SBIM_MASK_SERR	0x4	/* backplane SBErr interrupt mask */
+
+/* PCI_SPROM_CONTROL */
+#define	SPROM_BLANK		0x04  	/* indicating a blank sprom */
+#define SPROM_WRITEEN		0x10	/* sprom write enable */
+#define SPROM_BOOTROM_WE	0x20	/* external bootrom write enable */
+
+#define	SPROM_SIZE		256	/* sprom size in 16-bit */
+#define SPROM_CRC_RANGE		64	/* crc cover range in 16-bit */
+
+/* PCI_CFG_CMD_STAT */
+#define PCI_CFG_CMD_STAT_TA	0x08000000	/* target abort status */
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/pmon_osl.h linux.dev/arch/mips/bcm947xx/include/pmon_osl.h
--- linux.old/arch/mips/bcm947xx/include/pmon_osl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/pmon_osl.h	2005-11-07 21:57:07.869587250 +0100
@@ -0,0 +1,126 @@
+/*
+ * MIPS PMON boot loader OS Abstraction Layer.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.                      
+ *                                           
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;         
+ * the contents of this file may not be disclosed to third parties, copied      
+ * or duplicated in any form, in whole or in part, without the prior            
+ * written permission of Broadcom Corporation.                                  
+ * $Id$
+ */
+
+#ifndef _pmon_osl_h_
+#define _pmon_osl_h_
+
+#include <typedefs.h>
+#include <mips.h>
+#include <string.h>
+#include <utypes.h>
+
+extern int printf(char *fmt,...);
+extern int sprintf(char *dst,char *fmt,...);
+
+#define	OSL_UNCACHED(va)	phy2k1(log2phy((va)))
+#define	REG_MAP(pa, size)	phy2k1((pa))
+#define	REG_UNMAP(va)		/* nop */
+
+/* Common macros */
+
+#define BUSPROBE(val, addr) ((val) = *(addr))
+
+#define	ASSERT(exp)
+
+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) bzero(buf, size)
+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size)
+
+/* kludge */
+#define	OSL_PCI_READ_CONFIG(loc, offset, size)	((offset == 8)? 0: 0xffffffff)
+#define	OSL_PCI_WRITE_CONFIG(loc, offset, size, val)	ASSERT(0)
+
+#define wreg32(r,v)	(*(volatile uint32 *)(r) = (v))
+#define rreg32(r)	(*(volatile uint32 *)(r))
+#ifdef IL_BIGENDIAN
+#define wreg16(r,v)	(*(volatile uint16 *)((uint32)r^2) = (v))
+#define rreg16(r)	(*(volatile uint16 *)((uint32)r^2))
+#else
+#define wreg16(r,v)	(*(volatile uint16 *)(r) = (v))
+#define rreg16(r)	(*(volatile uint16 *)(r))
+#endif
+
+#include <memory.h>
+#define	bcopy(src, dst, len)	memcpy(dst, src, len)
+#define	bcmp(b1, b2, len)	memcmp(b1, b2, len)
+#define	bzero(b, len)		memset(b, '\0', len)
+
+/* register access macros */
+#define	R_REG(r)	((sizeof *(r) == sizeof (uint32))? rreg32(r): rreg16(r))
+#define	W_REG(r,v)	((sizeof *(r) == sizeof (uint32))? wreg32(r,(uint32)v): wreg16(r,(uint16)v))
+#define	AND_REG(r, v)	W_REG((r), R_REG(r) & (v))
+#define	OR_REG(r, v)	W_REG((r), R_REG(r) | (v))
+
+#define	R_SM(r)			*(r)
+#define	W_SM(r, v)		(*(r) = (v))
+#define	BZERO_SM(r, len)	memset(r, '\0', len)
+
+/* Host/Bus architecture specific swap. Noop for little endian systems, possible swap on big endian */
+#define BUS_SWAP32(v)	(v)
+
+#define	OSL_DELAY(usec)		delay_us(usec)
+extern void delay_us(uint usec);
+
+#define OSL_GETCYCLES(x) ((x) = 0)
+
+#define osl_attach(pdev)	(pdev)
+#define osl_detach(osh)
+
+#define	MALLOC(osh, size)	malloc(size)
+#define	MFREE(osh, addr, size)	free(addr)
+#define	MALLOCED(osh)		(0)
+#define	MALLOC_DUMP(osh, buf, sz)
+#define	MALLOC_FAILED(osh)
+extern void *malloc();
+extern void free(void *addr);
+
+#define	DMA_CONSISTENT_ALIGN	sizeof (int)
+#define	DMA_ALLOC_CONSISTENT(osh, size, pap)	et_dma_alloc_consistent(osh, size, pap)
+#define	DMA_FREE_CONSISTENT(osh, va, size, pa)
+extern void* et_dma_alloc_consistent(void *osh, uint size, ulong *pap);
+#define	DMA_TX 0
+#define	DMA_RX 1
+
+#define	DMA_MAP(osh, va, size, direction, p)	osl_dma_map(osh, (void*)va, size, direction)
+#define	DMA_UNMAP(osh, pa, size, direction, p)	/* nop */
+extern void* osl_dma_map(void *osh, void *va, uint size, uint direction);
+
+struct lbuf {
+	struct lbuf *next;	/* pointer to next lbuf on freelist */
+	uchar *buf;		/* pointer to buffer */
+	uint len;		/* nbytes of data */
+};
+
+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
+#define	PKTBUFSZ	2048
+
+/* packet primitives */
+#define	PKTGET(drv, len, send)		et_pktget(drv, len, send)
+#define	PKTFREE(drv, lb, send)		et_pktfree(drv, (struct lbuf*)lb, send)
+#define	PKTDATA(drv, lb)		((uchar*)OSL_UNCACHED(((struct lbuf*)lb)->buf))
+#define	PKTLEN(drv, lb)			((struct lbuf*)lb)->len
+#define PKTHEADROOM(drv, lb)		(0)
+#define PKTTAILROOM(drv, lb)		(0)
+#define	PKTNEXT(drv, lb)		NULL
+#define	PKTSETNEXT(lb, x)		ASSERT(0)
+#define	PKTSETLEN(drv, lb, bytes)	((struct lbuf*)lb)->len = bytes
+#define	PKTPUSH(drv, lb, bytes)		ASSERT(0)
+#define	PKTPULL(drv, lb, bytes)		ASSERT(0)
+#define	PKTDUP(drv, lb)			ASSERT(0)
+#define	PKTLINK(lb)			((struct lbuf*)lb)->next
+#define	PKTSETLINK(lb, x)		((struct lbuf*)lb)->next = (struct lbuf*)x
+#define	PKTPRIO(lb)			(0)
+#define	PKTSETPRIO(lb, x)		do {} while (0)
+extern void *et_pktget(void *drv, uint len, bool send);
+extern void et_pktfree(void *drv, struct lbuf *lb, bool send);
+
+#endif	/* _pmon_osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/proto/802.11.h linux.dev/arch/mips/bcm947xx/include/proto/802.11.h
--- linux.old/arch/mips/bcm947xx/include/proto/802.11.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/802.11.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,930 @@
+/*
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * Fundamental types and constants relating to 802.11 
+ *
+ * $Id$
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN		24
+#define DOT11_A4_HDR_LEN		30
+#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN
+#define DOT11_FCS_LEN			4
+#define DOT11_ICV_LEN			4
+#define DOT11_ICV_AES_LEN		8
+#define DOT11_QOS_LEN			2
+
+#define DOT11_KEY_INDEX_SHIFT		6
+#define DOT11_IV_LEN			4
+#define DOT11_IV_TKIP_LEN		8
+#define DOT11_IV_AES_OCB_LEN		4
+#define DOT11_IV_AES_CCM_LEN		8
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN		2304
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN		(DOT11_A4_HDR_LEN + \
+					 DOT11_QOS_LEN + \
+					 DOT11_IV_AES_CCM_LEN + \
+					 DOT11_MAX_MPDU_BODY_LEN + \
+					 DOT11_ICV_LEN + \
+					 DOT11_FCS_LEN)
+
+#define DOT11_MAX_SSID_LEN		32
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN		2347
+#define DOT11_MAX_RTS_LEN		2347
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN		256
+#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength of the attached PHY */
+#define DOT11_DEFAULT_FRAG_LEN		2346
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD		1
+#define DOT11_MAX_BEACON_PERIOD		0xFFFF
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD		1
+#define DOT11_MAX_DTIM_PERIOD		0xFF
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN	8
+#define DOT11_OUI_LEN			3
+struct dot11_llc_snap_header {
+	uint8	dsap;				/* always 0xAA */
+	uint8	ssap;				/* always 0xAA */
+	uint8	ctl;				/* always 0x03 */
+	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
+						   Bridge-Tunnel: 0x00 0x00 0xF8 */
+	uint16	type;				/* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN			(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ *		 The fields are defined such that the shorter 1, 2, and 3
+ *		 address headers just use the first k fields.
+ */
+struct dot11_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	a1;		/* address 1 */
+	struct ether_addr	a2;		/* address 2 */
+	struct ether_addr	a3;		/* address 3 */
+	uint16			seq;		/* sequence control */
+	struct ether_addr	a4;		/* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_RTS_LEN		16
+
+struct dot11_cts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_CTS_LEN		10
+
+struct dot11_ack_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_ACK_LEN		10
+
+struct dot11_ps_poll_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* AID */
+	struct ether_addr	bssid;		/* receiver address, STA in AP */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_PS_POLL_LEN	16
+
+struct dot11_cf_end_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	bssid;		/* transmitter address, STA in AP */
+} PACKED;
+#define	DOT11_CS_END_LEN	16
+
+/* Management frame header */
+struct dot11_management_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	da;		/* receiver address */
+	struct ether_addr	sa;		/* transmitter address */
+	struct ether_addr	bssid;		/* BSS ID */
+	uint16			seq;		/* sequence control */
+} PACKED;
+#define	DOT11_MGMT_HDR_LEN	24
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+	uint32			timestamp[2];
+	uint16			beacon_interval;
+	uint16			capability;
+} PACKED;
+#define	DOT11_BCN_PRB_LEN	12
+
+struct dot11_auth {
+	uint16			alg;		/* algorithm */
+	uint16			seq;		/* sequence control */
+	uint16			status;		/* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info elt */
+
+struct dot11_assoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+} PACKED;
+#define DOT11_ASSOC_REQ_FIXED_LEN	4	/* length of assoc frame without info elts */
+
+struct dot11_reassoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+	struct ether_addr	ap;		/* Current AP address */
+} PACKED;
+#define DOT11_REASSOC_REQ_FIXED_LEN	10	/* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+	uint16			capability;	/* capability information */
+	uint16			status;		/* status code */
+	uint16			aid;		/* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+	uint8	category;
+	uint8	action;
+	uint8	token;
+	uint8	data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN	3
+
+struct dot11_action_switch_channel {
+	uint8	category;
+	uint8	action;
+	uint8	data[5]; /* for switch IE */
+} PACKED;
+
+/**************
+  802.11h related definitions.
+**************/
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 power;
+} dot11_power_cnst_t;
+
+typedef struct {
+	uint8 min;
+	uint8 max;
+} dot11_power_cap_t;
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 tx_pwr;
+	uint8 margin;
+} dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN	2	/* length of IE data, not including 2 byte header */
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 first_channel;
+	uint8 num_channels;
+} dot11_supp_channels_t;
+
+/* csa mode type */
+#define DOT11_CSA_MODE_ADVISORY		0
+#define DOT11_CSA_MODE_NO_TX		1
+struct dot11_channel_switch {
+	uint8 id;
+	uint8 len;
+	uint8 mode;
+	uint8 channel;
+	uint8 count;
+}  PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
+/* length of IE data, not including 2 byte header */
+#define DOT11_SWITCH_IE_LEN             3 
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 	0
+#define DOT11_MEASURE_TYPE_CCA 		1
+#define DOT11_MEASURE_TYPE_RPI	 	2
+
+/* Measurement Mode field */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)
+#define DOT11_MEASURE_MODE_REQUEST	(1<<2)
+#define DOT11_MEASURE_MODE_REPORT 	(1<<3)
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE 	(1<<0)
+#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)
+#define DOT11_MEASURE_MODE_REFUSED	(1<<2)
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))
+#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))
+#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+} dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
+
+struct dot11_meas_rep {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	union 
+	{
+		struct {
+			uint8 channel;
+			uint8 start_time[8];
+			uint16 duration;
+			uint8 map;
+		} PACKED basic;
+		uint8 data[1];
+	} PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN	3
+
+struct dot11_meas_rep_basic {
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+	uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN	12
+
+struct dot11_quiet {
+	uint8 id;
+	uint8 len;
+	uint8 count;	/* TBTTs until beacon interval in quiet starts */
+	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
+	uint16 duration;/* Length of quiet period, in TU's */
+	uint16 offset;	/* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+typedef struct {
+	uint8 channel;
+	uint8 map;
+} chan_map_tuple_t;
+
+typedef struct {
+	uint8 id;
+	uint8 len;
+	uint8 eaddr[ETHER_ADDR_LEN];
+	uint8 interval;
+	chan_map_tuple_t map[1];
+} dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI			"\x00\x50\xf2"
+#define WME_VER			1
+#define WME_TYPE		2
+#define WME_SUBTYPE_IE		0	/* Information Element */
+#define WME_SUBTYPE_PARAM_IE	1	/* Parameter Element */
+#define WME_SUBTYPE_TSPEC	2	/* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE			0	/* Best Effort */
+#define AC_BK			1	/* Background */
+#define AC_VI			2	/* Video */
+#define AC_VO			3	/* Voice */
+#define AC_MAX			4
+
+/* WME Information Element (IE) */
+struct wme_ie {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 acinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7
+
+struct wme_acparam {
+	uint8	ACI;
+	uint8	ECW;
+	uint16  TXOP;		/* stored in network order (ls octet first) */
+} PACKED;
+typedef struct wme_acparam wme_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_params {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 acinfo;
+	uint8 rsvd;
+	wme_acparam_t acparam[4];
+} PACKED;
+typedef struct wme_params wme_params_t;
+#define WME_PARAMS_IE_LEN	24
+
+/* acinfo */
+#define WME_COUNT_MASK 	0x0f
+/* ACI */
+#define WME_AIFS_MASK 	0x0f
+#define WME_ACM_MASK 	0x10
+#define WME_ACI_MASK 	0x60
+#define WME_ACI_SHIFT 	5
+/* ECW */
+#define WME_CWMIN_MASK	0x0f
+#define WME_CWMAX_MASK	0xf0
+#define WME_CWMAX_SHIFT	4
+
+#define WME_TXOP_UNITS	32
+
+/* AP: default params to be announced in the Beacon Frames/Probe Responses Table 12 WME Draft*/
+/* AP:  default params to be Used in the AP Side Table 14 WME Draft January 2004 802.11-03-504r5 */
+#define WME_AC_BK_ACI_STA       0x27
+#define WME_AC_BK_ECW_STA       0xA4
+#define WME_AC_BK_TXOP_STA      0x0000
+#define WME_AC_BE_ACI_STA       0x03
+#define WME_AC_BE_ECW_STA       0xA4
+#define WME_AC_BE_TXOP_STA      0x0000
+#define WME_AC_VI_ACI_STA       0x42
+#define WME_AC_VI_ECW_STA       0x43
+#define WME_AC_VI_TXOP_STA      0x005e
+#define WME_AC_VO_ACI_STA       0x62
+#define WME_AC_VO_ECW_STA       0x32
+#define WME_AC_VO_TXOP_STA      0x002f
+                                                                                                             
+#define WME_AC_BK_ACI_AP        0x27
+#define WME_AC_BK_ECW_AP        0xA4
+#define WME_AC_BK_TXOP_AP       0x0000
+#define WME_AC_BE_ACI_AP        0x03
+#define WME_AC_BE_ECW_AP        0x64
+#define WME_AC_BE_TXOP_AP       0x0000
+#define WME_AC_VI_ACI_AP        0x41
+#define WME_AC_VI_ECW_AP        0x43
+#define WME_AC_VI_TXOP_AP       0x005e
+#define WME_AC_VO_ACI_AP        0x61
+#define WME_AC_VO_ECW_AP        0x32
+#define WME_AC_VO_TXOP_AP       0x002f
+
+/* WME Traffic Specification (TSPEC) element */
+#define WME_SUBTYPE_TSPEC 2
+#define WME_TSPEC_HDR_LEN		2
+#define WME_TSPEC_BODY_OFF		2
+struct wme_tspec {
+	uint8 oui[DOT11_OUI_LEN];	/* WME_OUI */
+	uint8 type;			/* WME_TYPE */
+	uint8 subtype;			/* WME_SUBTYPE_TSPEC */
+	uint8 version;			/* WME_VERSION */
+	uint16 ts_info;			/* TS Info */
+	uint16 nom_msdu_size;		/* (Nominal or fixed) MSDU Size (bytes) */
+	uint16 max_msdu_size;		/* Maximum MSDU Size (bytes) */
+	uint32 min_service_interval;	/* Minimum Service Interval (us) */
+	uint32 max_service_interval;	/* Maximum Service Interval (us) */
+	uint32 inactivity_interval;	/* Inactivity Interval (us) */
+	uint32 service_start;		/* Service Start Time (us) */
+	uint32 min_rate;		/* Minimum Data Rate (bps) */
+	uint32 mean_rate;		/* Mean Data Rate (bps) */
+	uint32 max_burst_size;		/* Maximum Burst Size (bytes) */
+	uint32 min_phy_rate;		/* Minimum PHY Rate (bps) */
+	uint32 peak_rate;		/* Peak Data Rate (bps) */
+	uint32 delay_bound;		/* Delay Bound (us) */
+	uint16 surplus_bandwidth;	/* Surplus Bandwidth Allowance Factor */
+	uint16 medium_time;		/* Medium Time (32 us/s periods) */
+} PACKED;
+typedef struct wme_tspec wme_tspec_t;
+#define WME_TSPEC_LEN 56		/* not including 2-byte header */
+
+/* ts_info */
+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
+#define TS_INFO_PRIO_SHIFT_HI		11
+#define TS_INFO_PRIO_MASK_HI		(0x7 << TS_INFO_PRIO_SHIFT_HI)
+#define TS_INFO_PRIO_SHIFT_LO		1
+#define TS_INFO_PRIO_MASK_LO		(0x7 << TS_INFO_PRIO_SHIFT_LO)
+#define TS_INFO_CONTENTION_SHIFT	7
+#define TS_INFO_CONTENTION_MASK		(0x1 << TS_INFO_CONTENTION_SHIFT)
+#define TS_INFO_DIRECTION_SHIFT		5
+#define TS_INFO_DIRECTION_MASK		(0x3 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_UPLINK			(0 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_DOWNLINK		(1 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_BIDIRECTIONAL		(3 << TS_INFO_DIRECTION_SHIFT)
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000		/* MSDU size is fixed */
+#define MSDU_SIZE_MASK	0x7fff		/* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define	INTEGER_SHIFT	13
+#define FRACTION_MASK	0x1FFF
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+	uint8 category;			/* DOT11_ACTION_NOTIFICATION */
+	uint8 action;
+	uint8 token;
+	uint8 status;
+	uint8 data[1];			/* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4	/* Fixed length */
+
+/* WME Action Codes */
+#define WME_SETUP_REQUEST	0
+#define WME_SETUP_RESPONSE	1
+#define WME_TEARDOWN		2
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED	0
+#define WME_INVALID_PARAMETERS	1
+#define WME_ADMISSION_REFUSED	3
+
+/* Macro to take a pointer to a beacon or probe response
+ * header and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM	0
+#define DOT11_SHARED_KEY	1
+#define DOT11_CHALLENGE_LEN	128
+
+/* Frame control macros */
+#define FC_PVER_MASK		0x3
+#define FC_PVER_SHIFT		0
+#define FC_TYPE_MASK		0xC
+#define FC_TYPE_SHIFT		2
+#define FC_SUBTYPE_MASK		0xF0
+#define FC_SUBTYPE_SHIFT	4
+#define FC_TODS			0x100
+#define FC_TODS_SHIFT		8
+#define FC_FROMDS		0x200
+#define FC_FROMDS_SHIFT		9
+#define FC_MOREFRAG		0x400
+#define FC_MOREFRAG_SHIFT	10
+#define FC_RETRY		0x800
+#define FC_RETRY_SHIFT		11
+#define FC_PM			0x1000
+#define FC_PM_SHIFT		12
+#define FC_MOREDATA		0x2000
+#define FC_MOREDATA_SHIFT	13
+#define FC_WEP			0x4000
+#define FC_WEP_SHIFT		14
+#define FC_ORDER		0x8000
+#define FC_ORDER_SHIFT		15
+
+/* sequence control macros */
+#define SEQNUM_SHIFT		4
+#define FRAGNUM_MASK		0xF
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG		0
+#define FC_TYPE_CTL		1
+#define FC_TYPE_DATA		2
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ		0
+#define FC_SUBTYPE_ASSOC_RESP		1
+#define FC_SUBTYPE_REASSOC_REQ		2
+#define FC_SUBTYPE_REASSOC_RESP		3
+#define FC_SUBTYPE_PROBE_REQ		4
+#define FC_SUBTYPE_PROBE_RESP		5
+#define FC_SUBTYPE_BEACON		8
+#define FC_SUBTYPE_ATIM			9
+#define FC_SUBTYPE_DISASSOC		10
+#define FC_SUBTYPE_AUTH			11
+#define FC_SUBTYPE_DEAUTH		12
+#define FC_SUBTYPE_ACTION		13
+
+/* Control Subtypes */
+#define FC_SUBTYPE_PS_POLL		10
+#define FC_SUBTYPE_RTS			11
+#define FC_SUBTYPE_CTS			12
+#define FC_SUBTYPE_ACK			13
+#define FC_SUBTYPE_CF_END		14
+#define FC_SUBTYPE_CF_END_ACK		15
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA			0
+#define FC_SUBTYPE_DATA_CF_ACK		1
+#define FC_SUBTYPE_DATA_CF_POLL		2
+#define FC_SUBTYPE_DATA_CF_ACK_POLL	3
+#define FC_SUBTYPE_NULL			4
+#define FC_SUBTYPE_CF_ACK		5
+#define FC_SUBTYPE_CF_POLL		6
+#define FC_SUBTYPE_CF_ACK_POLL		7
+#define FC_SUBTYPE_QOS_DATA		8
+#define FC_SUBTYPE_QOS_NULL		12
+
+/* type-subtype combos */
+#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)
+
+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
+
+#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
+#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
+#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
+#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
+#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
+#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
+#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
+#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
+#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
+#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
+#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
+
+#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
+#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
+#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
+#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
+#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
+#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
+
+#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
+#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
+#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
+#define FC_QOS_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
+#define FC_QOS_NULL	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
+
+/* QoS Control Field */
+
+/* 802.1D Tag */
+#define QOS_PRIO_SHIFT		0
+#define QOS_PRIO_MASK		0x0007
+#define QOS_PRIO(qos)		(((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
+
+#define QOS_TID_SHIFT		0
+#define QOS_TID_MASK		0x000f
+#define QOS_TID(qos)		(((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)
+
+/* Ack Policy (0 means Acknowledge) */
+#define QOS_ACK_SHIFT		5
+#define QOS_ACK_MASK		0x0060
+#define QOS_ACK(qos)		(((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN		2
+#define DOT11_MNG_AUTH_SEQ_LEN		2
+#define DOT11_MNG_BEACON_INT_LEN	2
+#define DOT11_MNG_CAP_LEN		2
+#define DOT11_MNG_AP_ADDR_LEN		6
+#define DOT11_MNG_LISTEN_INT_LEN	2
+#define DOT11_MNG_REASON_LEN		2
+#define DOT11_MNG_AID_LEN		2
+#define DOT11_MNG_STATUS_LEN		2
+#define DOT11_MNG_TIMESTAMP_LEN		8
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK			0x3fff
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED			0
+#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer valid */
+#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station is
+							   leaving (or has left) IBSS or ESS */
+#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
+#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable to handle
+							   all currently associated stations */
+#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
+							   nonauthenticated station */
+#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
+							   nonassociated station */
+#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
+							   leaving (or has left) BSS */
+#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
+							   not authenticated with responding station */
+#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_STATUS_SUCCESS			0	/* Successful */
+#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
+#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested capabilities
+							   in the Capability Information field */
+#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability to
+							   confirm that association exists */
+#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason outside
+							   the scope of this standard */
+#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support the
+							   specified authentication algorithm */
+#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame with
+							   authentication transaction sequence number
+							   out of expected sequence */
+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of challenge failure */
+#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout waiting
+							   for next frame in sequence */
+#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is unable to
+							   handle additional associated stations */
+#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting station
+							   not supporting all of the data rates in the
+							   BSSBasicRateSet parameter */
+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting station
+							   not supporting the Short Preamble option */
+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting station
+							   not supporting the PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting station
+							   not supporting the Channel Agility option */
+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum Management 
+							   capability is required. */
+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info in the 
+							   Power Cap element is unacceptable. */
+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info in the 
+							   Supported Channel element is unacceptable */
+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting station
+							   not supporting the Short Slot Time option */
+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting station
+							   not supporting the ER-PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting station
+							   not supporting the DSS-OFDM option */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN			1
+#define DOT11_MNG_IBSS_PARAM_LEN		2
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
+#define DOT11_MNG_TIM_FIXED_LEN			3
+#define DOT11_MNG_TIM_DTIM_COUNT		0
+#define DOT11_MNG_TIM_DTIM_PERIOD		1
+#define DOT11_MNG_TIM_BITMAP_CTL		2
+#define DOT11_MNG_TIM_PVB			3
+
+/* TLV defines */
+#define TLV_TAG_OFF		0
+#define TLV_LEN_OFF		1
+#define TLV_HDR_LEN		2
+#define TLV_BODY_OFF		2
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID			0
+#define DOT11_MNG_RATES_ID			1
+#define DOT11_MNG_FH_PARMS_ID			2
+#define DOT11_MNG_DS_PARMS_ID			3
+#define DOT11_MNG_CF_PARMS_ID			4
+#define DOT11_MNG_TIM_ID			5
+#define DOT11_MNG_IBSS_PARMS_ID			6
+#define DOT11_MNG_COUNTRY_ID			7
+#define DOT11_MNG_HOPPING_PARMS_ID		8
+#define DOT11_MNG_HOPPING_TABLE_ID		9
+#define DOT11_MNG_REQUEST_ID			10
+#define DOT11_MNG_CHALLENGE_ID			16
+#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
+#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
+#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
+#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
+#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
+#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement*/
+#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
+#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
+#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
+#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
+#define DOT11_MNG_ERP_ID			42
+#define DOT11_MNG_NONERP_ID			47
+#ifdef BCMWPA2
+#define DOT11_MNG_RSN_ID			48
+#endif /* BCMWPA2 */
+#define DOT11_MNG_EXT_RATES_ID			50
+#define DOT11_MNG_WPA_ID			221
+#define DOT11_MNG_PROPR_ID			221
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present in the BSS */
+#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for ERP-OFDM frames */
+#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed, 1 == not allowed */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS				0x0001
+#define DOT11_CAP_IBSS				0x0002
+#define DOT11_CAP_POLLABLE			0x0004
+#define DOT11_CAP_POLL_RQ			0x0008
+#define DOT11_CAP_PRIVACY			0x0010
+#define DOT11_CAP_SHORT				0x0020
+#define DOT11_CAP_PBCC				0x0040
+#define DOT11_CAP_AGILITY			0x0080
+#define DOT11_CAP_SPECTRUM			0x0100
+#define DOT11_CAP_SHORTSLOT			0x0400
+#define DOT11_CAP_CCK_OFDM			0x2000
+
+/* Action Frame Constants */
+#define DOT11_ACTION_CAT_ERR_MASK	0x80
+#define DOT11_ACTION_CAT_SPECT_MNG	0x00
+#define DOT11_ACTION_NOTIFICATION	0x11	/* 17 */
+
+#define DOT11_ACTION_ID_M_REQ		0
+#define DOT11_ACTION_ID_M_REP		1
+#define DOT11_ACTION_ID_TPC_REQ		2
+#define DOT11_ACTION_ID_TPC_REP		3
+#define DOT11_ACTION_ID_CHANNEL_SWITCH	4
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE		0
+#define DOT11_BSSTYPE_INDEPENDENT		1
+#define DOT11_BSSTYPE_ANY			2
+#define DOT11_SCANTYPE_ACTIVE			0
+#define DOT11_SCANTYPE_PASSIVE			1
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME		9
+#define APHY_SIFS_TIME		16
+#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
+#define APHY_PREAMBLE_TIME	16
+#define APHY_SIGNAL_TIME	4
+#define APHY_SYMBOL_TIME	4
+#define APHY_SERVICE_NBITS	16
+#define APHY_TAIL_NBITS		6
+#define	APHY_CWMIN		15
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME		20
+#define BPHY_SIFS_TIME		10
+#define BPHY_DIFS_TIME		50
+#define BPHY_PLCP_TIME		192
+#define BPHY_PLCP_SHORT_TIME	96
+#define	BPHY_CWMIN		31
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION	6
+
+#define PHY_CWMAX		1023
+
+#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+	uint32		txfrag;		/* dot11TransmittedFragmentCount */
+	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
+	uint32		txfail;		/* dot11FailedCount */
+	uint32		txretry;	/* dot11RetryCount */
+	uint32		txretrie;	/* dot11MultipleRetryCount */
+	uint32		rxdup;		/* dot11FrameduplicateCount */
+	uint32		txrts;		/* dot11RTSSuccessCount */
+	uint32		txnocts;	/* dot11RTSFailureCount */
+	uint32		txnoack;	/* dot11ACKFailureCount */
+	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
+	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
+	uint32		rxcrc;		/* dot11FCSErrorCount */
+	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
+	uint32		rxundec;	/* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI		"\x00\x10\x18"
+
+/* BRCM info element */
+struct brcm_ie {
+	uchar	id;		/* 221, DOT11_MNG_PROPR_ID */
+	uchar	len;   
+	uchar 	oui[3];
+	uchar	ver;
+	uchar	assoc;		/*  # of assoc STAs */
+	uchar	flags;		/* misc flags */
+} PACKED;
+#define BRCM_IE_LEN		8
+typedef	struct brcm_ie brcm_ie_t;
+#define BRCM_IE_VER		2
+#define BRCM_IE_LEGACY_AES_VER	1
+
+/* brcm_ie flags */
+#define	BRF_ABCAP		0x1	/* afterburner capable */
+#define	BRF_ABRQRD		0x2	/* afterburner requested */
+#define	BRF_LZWDS		0x4	/* lazy wds enabled */
+#define BRF_ABCOUNTER_MASK	0xf0  /* afterburner wds "state" counter */
+#define BRF_ABCOUNTER_SHIFT	4
+
+#define AB_WDS_TIMEOUT_MAX	15		/* afterburner wds Max count indicating not locally capable */
+#define AB_WDS_TIMEOUT_MIN	1		/* afterburner wds, use zero count as indicating "downrev" */
+
+
+/* OUI for BRCM proprietary IE */
+#define BRCM_PROP_OUI		"\x00\x90\x4C"
+
+/* Vendor IE structure */
+struct vndr_ie {
+	uchar id;
+	uchar len;
+	uchar oui [3];
+	uchar data [1]; 	/* Variable size data */
+}PACKED;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN		2	/* id + len field */
+#define VNDR_IE_MIN_LEN		3	/* size of the oui field */
+#define VNDR_IE_MAX_LEN		256
+
+/* WPA definitions */
+#define WPA_VERSION		1
+#define WPA_OUI			"\x00\x50\xF2"
+
+#ifdef BCMWPA2
+#define WPA2_VERSION		1
+#define WPA2_VERSION_LEN	2
+#define WPA2_OUI		"\x00\x0F\xAC"
+#endif /* BCMWPA2 */
+
+#define WPA_OUI_LEN	3
+
+/* RSN authenticated key managment suite */
+#define RSN_AKM_NONE		0	/* None (IBSS) */
+#define RSN_AKM_UNSPECIFIED	1	/* Over 802.1x */
+#define RSN_AKM_PSK		2	/* Pre-shared Key */
+
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS	4	/* number of default keys */
+#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
+#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
+#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
+#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
+#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
+#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
+#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX		16	/* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX		24	/* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE		16	/* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/proto/bcmeth.h linux.dev/arch/mips/bcm947xx/include/proto/bcmeth.h
--- linux.old/arch/mips/bcm947xx/include/proto/bcmeth.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/bcmeth.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,103 @@
+/*
+ * Broadcom Ethernettype  protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Broadcom Ethernet protocol defines 
+ *
+ */
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* ETHER_TYPE_BRCM is defined in ethernet.h */
+
+/*
+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
+ * in one of two formats: (only subtypes 32768-65535 are in use now)
+ *
+ * subtypes 0-32767:
+ *     8 bit subtype (0-127)
+ *     8 bit length in bytes (0-255)
+ *
+ * subtypes 32768-65535:
+ *     16 bit big-endian subtype
+ *     16 bit big-endian length in bytes (0-65535)
+ *
+ * length is the number of additional bytes beyond the 4 or 6 byte header
+ *
+ * Reserved values:
+ * 0 reserved
+ * 5-15 reserved for iLine protocol assignments
+ * 17-126 reserved, assignable
+ * 127 reserved
+ * 32768 reserved
+ * 32769-65534 reserved, assignable
+ * 65535 reserved
+ */
+
+/* 
+ * While adding the subtypes and their specific processing code make sure 
+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition 
+ */
+
+#define	BCMILCP_SUBTYPE_RATE		1
+#define	BCMILCP_SUBTYPE_LINK		2
+#define	BCMILCP_SUBTYPE_CSA		3
+#define	BCMILCP_SUBTYPE_LARQ		4
+#define BCMILCP_SUBTYPE_VENDOR		5
+#define	BCMILCP_SUBTYPE_FLH		17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG	32769
+#define BCMILCP_SUBTYPE_CERT		32770
+#define BCMILCP_SUBTYPE_SES		32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED	0
+#define BCMILCP_BCM_SUBTYPE_EVENT		1
+#define BCMILCP_BCM_SUBTYPE_SES			2
+/*
+The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
+within BCMILCP_BCM_SUBTYPE_EVENT type messages
+*/
+/*#define BCMILCP_BCM_SUBTYPE_EAPOL		3*/
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH	8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION		0
+
+/* These fields are stored in network order */
+typedef  struct bcmeth_hdr
+{
+	uint16	subtype; /* Vendor specific..32769*/
+	uint16	length; 
+	uint8	version; /* Version is 0*/
+	uint8	oui[3]; /* Broadcom OUI*/
+	/* user specific Data */
+	uint16	usr_subtype;
+} PACKED bcmeth_hdr_t;
+
+
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/proto/bcmip.h linux.dev/arch/mips/bcm947xx/include/proto/bcmip.h
--- linux.old/arch/mips/bcm947xx/include/proto/bcmip.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/bcmip.h	2005-11-08 00:15:47.881307500 +0100
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.                      
+ *                                           
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;         
+ * the contents of this file may not be disclosed to third parties, copied      
+ * or duplicated in any form, in whole or in part, without the prior            
+ * written permission of Broadcom Corporation.                                  
+ *
+ * Fundamental constants relating to IP Protocol
+ *
+ * $Id$
+ */
+
+#ifndef _bcmip_h_
+#define _bcmip_h_
+
+/* IP header */
+#define IPV4_VERIHL_OFFSET	0	/* version and ihl byte offset */
+#define IPV4_TOS_OFFSET		1	/* TOS offset */
+#define IPV4_PROT_OFFSET	9	/* protocol type offset */
+#define IPV4_CHKSUM_OFFSET	10	/* IP header checksum offset */
+#define IPV4_SRC_IP_OFFSET	12	/* src IP addr offset */
+#define IPV4_DEST_IP_OFFSET	16	/* dest IP addr offset */
+
+#define IPV4_VER_MASK	0xf0
+#define IPV4_IHL_MASK	0x0f
+
+#define IPV4_PROT_UDP	17	/* UDP protocol type */
+
+#define IPV4_ADDR_LEN	4	/* IP v4 address length */
+
+#define IPV4_VER_NUM	0x40	/* IP v4 version number */
+
+/* NULL IP address check */
+#define IPV4_ISNULLADDR(a)	((((uint8 *)(a))[0] + ((uint8 *)(a))[1] + \
+				((uint8 *)(a))[2] + ((uint8 *)(a))[3]) == 0)
+
+#define IPV4_ADDR_STR_LEN	16
+
+#endif	/* #ifndef _bcmip_h_ */
+
diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h
--- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,169 @@
+/*******************************************************************************
+ * $Id$
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ ******************************************************************************/
+
+#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define	ETHER_ADDR_LEN		6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define	ETHER_TYPE_LEN		2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define	ETHER_CRC_LEN		4
+
+/*
+ * The length of the combined header.
+ */
+#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define	ETHER_MIN_LEN		64
+
+/*
+ * The minimum packet user data length.
+ */
+#define	ETHER_MIN_DATA		46
+
+/*
+ * The maximum packet length.
+ */
+#define	ETHER_MAX_LEN		1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define	ETHER_MAX_DATA		1500
+
+/* ether types */
+#define	ETHER_TYPE_IP		0x0800		/* IP */
+#define ETHER_TYPE_ARP		0x0806		/* ARP */
+#define ETHER_TYPE_8021Q	0x8100		/* 802.1Q */
+#define	ETHER_TYPE_BRCM		0x886c		/* Broadcom Corp. */
+#define	ETHER_TYPE_802_1X	0x888e		/* 802.1x */
+#define	ETHER_TYPE_802_1X_PREAUTH	0x88c7	/* 802.1x preauthentication*/
+
+/* Broadcom subtype follows ethertype;  First 2 bytes are reserved; Next 2 are subtype; */
+#define	ETHER_BRCM_SUBTYPE_LEN	4		/* Broadcom 4 byte subtype */
+#define	ETHER_BRCM_CRAM		0x1		/* Broadcom subtype cram protocol */
+
+/* ether header */
+#define ETHER_DEST_OFFSET	0		/* dest address offset */
+#define ETHER_SRC_OFFSET	6		/* src address offset */
+#define ETHER_TYPE_OFFSET	12		/* ether type offset */
+
+/*
+ * A macro to validate a length with
+ */
+#define	ETHER_IS_VALID_LEN(foo)	\
+	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct	ether_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];
+	uint8	ether_shost[ETHER_ADDR_LEN];
+	uint16	ether_type;
+} PACKED;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct	ether_addr {
+	uint8 octet[ETHER_ADDR_LEN];
+} PACKED;
+#endif
+
+/*
+ * Takes a pointer, sets locally admininistered 
+ * address bit in the 48-bit Ethernet address.
+ */
+#define ETHER_SET_LOCALADDR(ea) ( ((uint8 *)(ea))[0] = \
+				(((uint8 *)(ea))[0] | 2) )
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
+
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define	ether_cmp(a, b)	( \
+	!(((short*)a)[0] == ((short*)b)[0]) | \
+	!(((short*)a)[1] == ((short*)b)[1]) | \
+	!(((short*)a)[2] == ((short*)b)[2]))
+
+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
+#define	ether_copy(s, d) { \
+	((short*)d)[0] = ((short*)s)[0]; \
+	((short*)d)[1] = ((short*)s)[1]; \
+	((short*)d)[2] = ((short*)s)[2]; }
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
+			    ((uint8 *)(ea))[1] &		\
+			    ((uint8 *)(ea))[2] &		\
+			    ((uint8 *)(ea))[3] &		\
+			    ((uint8 *)(ea))[4] &		\
+			    ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
+			    ((uint8 *)(ea))[1] |		\
+			    ((uint8 *)(ea))[2] |		\
+			    ((uint8 *)(ea))[3] |		\
+			    ((uint8 *)(ea))[4] |		\
+			    ((uint8 *)(ea))[5]) == 0)
+
+/* Differentiated Services Codepoint - upper 6 bits of tos in iphdr */
+#define	DSCP_MASK		0xFC		/* upper 6 bits */
+#define	DSCP_SHIFT		2
+#define	DSCP_WME_PRI_MASK	0xE0		/* upper 3 bits */
+#define	DSCP_WME_PRI_SHIFT	5
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _NET_ETHERNET_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/proto/vlan.h linux.dev/arch/mips/bcm947xx/include/proto/vlan.h
--- linux.old/arch/mips/bcm947xx/include/proto/vlan.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/vlan.h	2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,50 @@
+/*
+ * 802.1Q VLAN protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _vlan_h_
+#define _vlan_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define VLAN_VID_MASK		0xfff	/* low 12 bits are vlan id */
+#define	VLAN_CFI_SHIFT		12	/* canonical format indicator bit */
+#define VLAN_PRI_SHIFT		13	/* user priority */
+
+#define VLAN_PRI_MASK		7	/* 3 bits of priority */
+
+#define	VLAN_TAG_LEN		4
+#define	VLAN_TAG_OFFSET		(2 * ETHER_ADDR_LEN)
+
+struct ethervlan_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];
+	uint8	ether_shost[ETHER_ADDR_LEN];
+	uint16	vlan_type;		/* 0x8100 */
+	uint16	vlan_tag;		/* priority, cfi and vid */
+	uint16	ether_type;
+};
+
+#define	ETHERVLAN_HDR_LEN	(ETHER_HDR_LEN + VLAN_TAG_LEN)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _vlan_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/proto/wpa.h linux.dev/arch/mips/bcm947xx/include/proto/wpa.h
--- linux.old/arch/mips/bcm947xx/include/proto/wpa.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/proto/wpa.h	2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,140 @@
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* Reason Codes */
+
+/* 10 and 11 are from TGh. */
+#define DOT11_RC_BAD_PC				10	/* Unacceptable power capability element */
+#define DOT11_RC_BAD_CHANNELS			11	/* Unacceptable supported channels element */
+/* 12 is unused */
+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
+#define DOT11_RC_INVALID_WPA_IE			13	/* Invalid info. element */
+#define DOT11_RC_MIC_FAILURE			14	/* Michael failure */
+#define DOT11_RC_4WH_TIMEOUT			15	/* 4-way handshake timeout */
+#define DOT11_RC_GTK_UPDATE_TIMEOUT		16	/* Group key update timeout */
+#define DOT11_RC_WPA_IE_MISMATCH		17	/* WPA IE in 4-way handshake differs from (re-)assoc. request/probe response */
+#define DOT11_RC_INVALID_MC_CIPHER		18	/* Invalid multicast cipher */
+#define DOT11_RC_INVALID_UC_CIPHER		19	/* Invalid unicast cipher */
+#define DOT11_RC_INVALID_AKMP			20	/* Invalid authenticated key management protocol */
+#define DOT11_RC_BAD_WPA_VERSION		21	/* Unsupported WPA version */
+#define DOT11_RC_INVALID_WPA_CAP		22	/* Invalid WPA IE capabilities */
+#define DOT11_RC_8021X_AUTH_FAIL		23	/* 802.1X authentication failure */
+
+#define WPA2_PMKID_LEN	16
+
+/* WPA IE fixed portion */
+typedef struct
+{
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	uint8 oui[3];	/* IE OUI */
+	uint8 oui_type;	/* OUI type */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN	4
+#define WPA_IE_FIXED_LEN	8
+#define WPA_IE_TAG_FIXED_LEN	6
+
+typedef struct {
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN	4
+#define WPA_RSN_IE_TAG_FIXED_LEN	2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+
+/* WPA suite/multicast suite */
+typedef struct
+{
+	uint8 oui[3];
+	uint8 type;
+} PACKED wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN	4
+
+/* WPA unicast suite list/key management suite list */
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_suite_t list[1];
+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN	2
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_pmkid_t list[1];
+} PACKED wpa_pmkid_list_t;
+
+/* WPA cipher suites */
+#define WPA_CIPHER_NONE		0	/* None */
+#define WPA_CIPHER_WEP_40	1	/* WEP (40-bit) */
+#define WPA_CIPHER_TKIP		2	/* TKIP: default for WPA */
+#define WPA_CIPHER_AES_OCB	3	/* AES (OCB) */
+#define WPA_CIPHER_AES_CCM	4	/* AES (CCM) */
+#define WPA_CIPHER_WEP_104	5	/* WEP (104-bit) */
+
+#define IS_WPA_CIPHER(cipher)	((cipher) == WPA_CIPHER_NONE || \
+				 (cipher) == WPA_CIPHER_WEP_40 || \
+				 (cipher) == WPA_CIPHER_WEP_104 || \
+				 (cipher) == WPA_CIPHER_TKIP || \
+				 (cipher) == WPA_CIPHER_AES_OCB || \
+				 (cipher) == WPA_CIPHER_AES_CCM)
+
+/* WPA TKIP countermeasures parameters */
+#define WPA_TKIP_CM_DETECT	60	/* multiple MIC failure window (seconds) */
+#define WPA_TKIP_CM_BLOCK	60	/* countermeasures active window (seconds) */
+
+/* WPA capabilities defined in 802.11i */
+#define WPA_CAP_4_REPLAY_CNTRS		2
+#define WPA_CAP_16_REPLAY_CNTRS		3
+#define WPA_CAP_REPLAY_CNTR_SHIFT	2
+#define WPA_CAP_REPLAY_CNTR_MASK	0x000c
+
+/* WPA Specific defines */
+#define WPA_CAP_LEN	2
+
+#define	WPA_CAP_WPA2_PREAUTH		1
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _proto_wpa_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/rts/crc.h linux.dev/arch/mips/bcm947xx/include/rts/crc.h
--- linux.old/arch/mips/bcm947xx/include/rts/crc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/rts/crc.h	2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,69 @@
+/*******************************************************************************
+ * $Id$
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * crc.h - a function to compute crc for iLine10 headers
+ ******************************************************************************/
+
+#ifndef _RTS_CRC_H_
+#define _RTS_CRC_H_ 1
+
+#include "typedefs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define CRC8_INIT_VALUE  0xff       /* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE  0x9f       /* Good final CRC8 checksum value */
+#define HCS_GOOD_VALUE   0x39       /* Good final header checksum value */
+
+#define CRC16_INIT_VALUE 0xffff     /* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8     /* Good final CRC16 checksum value */
+
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
+
+void   hcs(uint8 *, uint);
+uint8  crc8(uint8 *, uint, uint8);
+uint16 crc16(uint8 *, uint, uint16);
+uint32 crc32(uint8 *, uint, uint32);
+
+/* macros for common usage */
+
+#define APPEND_CRC8(pbytes, nbytes)                           \
+do {                                                          \
+    uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
+    (pbytes)[(nbytes)] = tmp;                                 \
+    (nbytes) += 1;                                            \
+} while (0)
+
+#define APPEND_CRC16(pbytes, nbytes)                               \
+do {                                                               \
+    uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
+    (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff;                    \
+    (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff;                    \
+    (nbytes) += 2;                                                 \
+} while (0)
+
+#define APPEND_CRC32(pbytes, nbytes)                                   \
+do {                                                                   \
+    uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
+    (pbytes)[(nbytes) + 0] = (tmp >>  0) & 0xff;                       \
+    (pbytes)[(nbytes) + 1] = (tmp >>  8) & 0xff;                       \
+    (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff;                       \
+    (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff;                       \
+    (nbytes) += 4;                                                     \
+} while (0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTS_CRC_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
--- linux.old/arch/mips/bcm947xx/include/sbchipc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,440 @@
+/*
+ * SiliconBackplane Chipcommon core hardware definitions.
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * $Id$
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+#ifndef	_SBCHIPC_H
+#define	_SBCHIPC_H
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+typedef volatile struct {
+	uint32	chipid;			/* 0x0 */
+	uint32	capabilities;
+	uint32	corecontrol;		/* corerev >= 1 */
+	uint32	bist;
+
+	/* OTP */
+	uint32	otpstatus;		/* 0x10, corerev >= 10 */
+	uint32	otpcontrol;
+	uint32	otpprog;
+	uint32	PAD;
+
+	/* Interrupt control */
+	uint32	intstatus;		/* 0x20 */
+	uint32	intmask;
+	uint32	chipcontrol;		/* 0x28, rev >= 11 */
+	uint32	chipstatus;		/* 0x2c, rev >= 11 */
+
+	/* Jtag Master */
+	uint32	jtagcmd;		/* 0x30, rev >= 10 */
+	uint32	jtagir;
+	uint32	jtagdr;
+	uint32	jtagctrl;
+
+	/* serial flash interface registers */
+	uint32	flashcontrol;		/* 0x40 */
+	uint32	flashaddress;
+	uint32	flashdata;
+	uint32	PAD[1];
+
+	/* Silicon backplane configuration broadcast control */
+	uint32	broadcastaddress;	/* 0x50 */
+	uint32	broadcastdata;
+	uint32	PAD[2];
+
+	/* gpio - cleared only by power-on-reset */
+	uint32	gpioin;			/* 0x60 */
+	uint32	gpioout;
+	uint32	gpioouten;
+	uint32	gpiocontrol;
+	uint32	gpiointpolarity;
+	uint32	gpiointmask;
+	uint32	PAD[2];
+
+	/* Watchdog timer */
+	uint32	watchdog;		/* 0x80 */
+	uint32	PAD[1];
+
+	/*GPIO based LED powersave registers corerev >= 16*/
+	uint32  gpiotimerval;		/*0x88 */
+	uint32  gpiotimeroutmask;
+
+	/* clock control */
+	uint32	clockcontrol_n;		/* 0x90 */
+	uint32	clockcontrol_sb;	/* aka m0 */
+	uint32	clockcontrol_pci;	/* aka m1 */
+	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
+	uint32	clockcontrol_mips;	/* aka m3 */
+	uint32	clkdiv;			/* corerev >= 3 */
+	uint32	PAD[2];
+
+	/* pll delay registers (corerev >= 4) */
+	uint32	pll_on_delay;		/* 0xb0 */
+	uint32	fref_sel_delay;
+	uint32	slow_clk_ctl;		/* 5 < corerev < 10 */
+	uint32	PAD[1];
+
+	/* Instaclock registers (corerev >= 10) */
+	uint32	system_clk_ctl;		/* 0xc0 */
+	uint32	clkstatestretch;
+	uint32	PAD[14];
+
+	/* ExtBus control registers (corerev >= 3) */
+	uint32	pcmcia_config;		/* 0x100 */
+	uint32	pcmcia_memwait;
+	uint32	pcmcia_attrwait;
+	uint32	pcmcia_iowait;
+	uint32	ide_config;
+	uint32	ide_memwait;
+	uint32	ide_attrwait;
+	uint32	ide_iowait;
+	uint32	prog_config;
+	uint32	prog_waitcount;
+	uint32	flash_config;
+	uint32	flash_waitcount;
+	uint32	PAD[116];
+
+	/* uarts */
+	uint8	uart0data;		/* 0x300 */
+	uint8	uart0imr;
+	uint8	uart0fcr;
+	uint8	uart0lcr;
+	uint8	uart0mcr;
+	uint8	uart0lsr;
+	uint8	uart0msr;
+	uint8	uart0scratch;
+	uint8	PAD[248];		/* corerev >= 1 */
+
+	uint8	uart1data;		/* 0x400 */
+	uint8	uart1imr;
+	uint8	uart1fcr;
+	uint8	uart1lcr;
+	uint8	uart1mcr;
+	uint8	uart1lsr;
+	uint8	uart1msr;
+	uint8	uart1scratch;
+} chipcregs_t;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#define	CC_CHIPID		0
+#define	CC_CAPABILITIES		4
+#define	CC_JTAGCMD		0x30
+#define	CC_JTAGIR		0x34
+#define	CC_JTAGDR		0x38
+#define	CC_JTAGCTRL		0x3c
+#define	CC_WATCHDOG		0x80
+#define	CC_CLKC_N		0x90
+#define	CC_CLKC_M0		0x94
+#define	CC_CLKC_M1		0x98
+#define	CC_CLKC_M2		0x9c
+#define	CC_CLKC_M3		0xa0
+#define	CC_CLKDIV		0xa4
+#define	CC_SYS_CLK_CTL		0xc0
+#define	CC_OTP			0x800
+
+/* chipid */
+#define	CID_ID_MASK		0x0000ffff		/* Chip Id mask */
+#define	CID_REV_MASK		0x000f0000		/* Chip Revision mask */
+#define	CID_REV_SHIFT		16			/* Chip Revision shift */
+#define	CID_PKG_MASK		0x00f00000		/* Package Option mask */
+#define	CID_PKG_SHIFT		20			/* Package Option shift */
+#define	CID_CC_MASK		0x0f000000		/* CoreCount (corerev >= 4) */
+#define CID_CC_SHIFT		24
+
+/* capabilities */
+#define	CAP_UARTS_MASK		0x00000003		/* Number of uarts */
+#define CAP_MIPSEB		0x00000004		/* MIPS is in big-endian mode */
+#define CAP_UCLKSEL		0x00000018		/* UARTs clock select */
+#define CAP_UINTCLK		0x00000008		/* UARTs are driven by internal divided clock */
+#define CAP_UARTGPIO		0x00000020		/* UARTs own Gpio's 15:12 */
+#define CAP_EXTBUS		0x00000040		/* External bus present */
+#define	CAP_FLASH_MASK		0x00000700		/* Type of flash */
+#define	CAP_PLL_MASK		0x00038000		/* Type of PLL */
+#define CAP_PWR_CTL		0x00040000		/* Power control */
+#define CAP_OTPSIZE		0x00380000		/* OTP Size (0 = none) */
+#define CAP_OTPSIZE_SHIFT	19			/* OTP Size shift */
+#define CAP_OTPSIZE_BASE	5			/* OTP Size base */
+#define CAP_JTAGP		0x00400000		/* JTAG Master Present */
+#define CAP_ROM			0x00800000		/* Internal boot rom active */
+
+/* PLL type */
+#define PLL_NONE		0x00000000
+#define PLL_TYPE1		0x00010000		/* 48Mhz base, 3 dividers */
+#define PLL_TYPE2		0x00020000		/* 48Mhz, 4 dividers */
+#define PLL_TYPE3		0x00030000		/* 25Mhz, 2 dividers */
+#define PLL_TYPE4		0x00008000		/* 48Mhz, 4 dividers */
+#define PLL_TYPE5		0x00018000		/* 25Mhz, 4 dividers */
+#define PLL_TYPE6		0x00028000		/* 100/200 or 120/240 only */
+#define PLL_TYPE7		0x00038000		/* 25Mhz, 4 dividers */
+
+/* corecontrol */
+#define CC_UARTCLKO		0x00000001		/* Drive UART with internal clock */
+#define	CC_SE			0x00000002		/* sync clk out enable (corerev >= 3) */
+
+/* Fields in the otpstatus register */
+#define	OTPS_PROGFAIL		0x80000000
+#define	OTPS_PROTECT		0x00000007
+#define	OTPS_HW_PROTECT		0x00000001
+#define	OTPS_SW_PROTECT		0x00000002
+#define	OTPS_CID_PROTECT	0x00000004
+
+/* Fields in the otpcontrol register */
+#define	OTPC_RECWAIT		0xff000000
+#define	OTPC_PROGWAIT		0x00ffff00
+#define	OTPC_PRW_SHIFT		8
+#define	OTPC_MAXFAIL		0x00000038
+#define	OTPC_VSEL		0x00000006
+#define	OTPC_SELVL		0x00000001
+
+/* Fields in otpprog */
+#define	OTPP_COL_MASK		0x000000ff
+#define	OTPP_ROW_MASK		0x0000ff00
+#define	OTPP_ROW_SHIFT		8
+#define	OTPP_READERR		0x10000000
+#define	OTPP_VALUE		0x20000000
+#define	OTPP_VALUE_SHIFT		29
+#define	OTPP_READ		0x40000000
+#define	OTPP_START		0x80000000
+#define	OTPP_BUSY		0x80000000
+
+/* jtagcmd */
+#define JCMD_START		0x80000000
+#define JCMD_BUSY		0x80000000
+#define JCMD_PAUSE		0x40000000
+#define JCMD0_ACC_MASK		0x0000f000
+#define JCMD0_ACC_IRDR		0x00000000
+#define JCMD0_ACC_DR		0x00001000
+#define JCMD0_ACC_IR		0x00002000
+#define JCMD0_ACC_RESET		0x00003000
+#define JCMD0_ACC_IRPDR		0x00004000
+#define JCMD0_ACC_PDR		0x00005000
+#define JCMD0_IRW_MASK		0x00000f00
+#define JCMD_ACC_MASK		0x000f0000		/* Changes for corerev 11 */
+#define JCMD_ACC_IRDR		0x00000000
+#define JCMD_ACC_DR		0x00010000
+#define JCMD_ACC_IR		0x00020000
+#define JCMD_ACC_RESET		0x00030000
+#define JCMD_ACC_IRPDR		0x00040000
+#define JCMD_ACC_PDR		0x00050000
+#define JCMD_IRW_MASK		0x00001f00
+#define JCMD_IRW_SHIFT		8
+#define JCMD_DRW_MASK		0x0000003f
+
+/* jtagctrl */
+#define JCTRL_FORCE_CLK		4			/* Force clock */
+#define JCTRL_EXT_EN		2			/* Enable external targets */
+#define JCTRL_EN		1			/* Enable Jtag master */
+
+/* Fields in clkdiv */
+#define	CLKD_SFLASH		0x0f000000
+#define	CLKD_SFLASH_SHIFT	24
+#define	CLKD_OTP		0x000f0000
+#define	CLKD_OTP_SHIFT		16
+#define	CLKD_JTAG		0x00000f00
+#define	CLKD_JTAG_SHIFT		8		
+#define	CLKD_UART		0x000000ff
+
+/* intstatus/intmask */
+#define	CI_GPIO			0x00000001		/* gpio intr */
+#define	CI_EI			0x00000002		/* ro: ext intr pin (corerev >= 3) */
+#define	CI_WDRESET		0x80000000		/* watchdog reset occurred */
+
+/* slow_clk_ctl */
+#define SCC_SS_MASK		0x00000007		/* slow clock source mask */
+#define	SCC_SS_LPO		0x00000000		/* source of slow clock is LPO */
+#define	SCC_SS_XTAL		0x00000001		/* source of slow clock is crystal */
+#define	SCC_SS_PCI		0x00000002		/* source of slow clock is PCI */
+#define SCC_LF			0x00000200		/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define SCC_LP			0x00000400		/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define SCC_FS			0x00000800		/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define SCC_IP			0x00001000		/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define SCC_XC			0x00002000		/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define SCC_XP			0x00004000		/* XtalPU (RO), 1/0: crystal running/disabled */
+#define SCC_CD_MASK		0xffff0000		/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define SCC_CD_SHIFT		16
+
+/* system_clk_ctl */
+#define	SYCC_IE			0x00000001		/* ILPen: Enable Idle Low Power */
+#define	SYCC_AE			0x00000002		/* ALPen: Enable Active Low Power */
+#define	SYCC_FP			0x00000004		/* ForcePLLOn */
+#define	SYCC_AR			0x00000008		/* Force ALP (or HT if ALPen is not set */
+#define	SYCC_HR			0x00000010		/* Force HT */
+#define SYCC_CD_MASK		0xffff0000		/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define SYCC_CD_SHIFT		16
+
+/* gpiotimerval*/
+#define GPIO_ONTIME_SHIFT	16
+
+/* clockcontrol_n */
+#define	CN_N1_MASK		0x3f			/* n1 control */
+#define	CN_N2_MASK		0x3f00			/* n2 control */
+#define	CN_N2_SHIFT		8
+#define	CN_PLLC_MASK		0xf0000			/* pll control */
+#define	CN_PLLC_SHIFT		16
+
+/* clockcontrol_sb/pci/uart */
+#define	CC_M1_MASK		0x3f			/* m1 control */
+#define	CC_M2_MASK		0x3f00			/* m2 control */
+#define	CC_M2_SHIFT		8
+#define	CC_M3_MASK		0x3f0000		/* m3 control */
+#define	CC_M3_SHIFT		16
+#define	CC_MC_MASK		0x1f000000		/* mux control */
+#define	CC_MC_SHIFT		24
+
+/* N3M Clock control magic field values */
+#define	CC_F6_2			0x02			/* A factor of 2 in */
+#define	CC_F6_3			0x03			/* 6-bit fields like */
+#define	CC_F6_4			0x05			/* N1, M1 or M3 */
+#define	CC_F6_5			0x09
+#define	CC_F6_6			0x11
+#define	CC_F6_7			0x21
+
+#define	CC_F5_BIAS		5			/* 5-bit fields get this added */
+
+#define	CC_MC_BYPASS		0x08
+#define	CC_MC_M1		0x04
+#define	CC_MC_M1M2		0x02
+#define	CC_MC_M1M2M3		0x01
+#define	CC_MC_M1M3		0x11
+
+/* Type 2 Clock control magic field values */
+#define	CC_T2_BIAS		2			/* n1, n2, m1 & m3 bias */
+#define	CC_T2M2_BIAS		3			/* m2 bias */
+
+#define	CC_T2MC_M1BYP		1
+#define	CC_T2MC_M2BYP		2
+#define	CC_T2MC_M3BYP		4
+
+/* Type 6 Clock control magic field values */
+#define	CC_T6_MMASK		1			/* bits of interest in m */
+#define	CC_T6_M0		120000000		/* sb clock for m = 0 */
+#define	CC_T6_M1		100000000		/* sb clock for m = 1 */
+#define	SB2MIPS_T6(sb)		(2 * (sb))
+
+/* Common clock base */
+#define	CC_CLOCK_BASE1		24000000		/* Half the clock freq */
+#define CC_CLOCK_BASE2		12500000		/* Alternate crystal on some PLL's */
+
+/* Clock control values for 200Mhz in 5350 */
+#define	CLKC_5350_N		0x0311
+#define	CLKC_5350_M		0x04020009
+
+/* Flash types in the chipcommon capabilities register */
+#define FLASH_NONE		0x000		/* No flash */
+#define SFLASH_ST		0x100		/* ST serial flash */
+#define SFLASH_AT		0x200		/* Atmel serial flash */
+#define	PFLASH			0x700		/* Parallel flash */
+
+/* Bits in the config registers */
+#define	CC_CFG_EN		0x0001		/* Enable */
+#define	CC_CFG_EM_MASK		0x000e		/* Extif Mode */
+#define	CC_CFG_EM_ASYNC		0x0002		/*   Async/Parallel flash */
+#define	CC_CFG_EM_SYNC		0x0004		/*   Synchronous */
+#define	CC_CFG_EM_PCMCIA	0x0008		/*   PCMCIA */
+#define	CC_CFG_EM_IDE		0x000a		/*   IDE */
+#define	CC_CFG_DS		0x0010		/* Data size, 0=8bit, 1=16bit */
+#define	CC_CFG_CD_MASK		0x0060		/* Sync: Clock divisor */
+#define	CC_CFG_CE		0x0080		/* Sync: Clock enable */
+#define	CC_CFG_SB		0x0100		/* Sync: Size/Bytestrobe */
+
+/* Start/busy bit in flashcontrol */
+#define SFLASH_START		0x80000000
+#define SFLASH_BUSY		SFLASH_START
+
+/* flashcontrol opcodes for ST flashes */
+#define SFLASH_ST_WREN		0x0006		/* Write Enable */
+#define SFLASH_ST_WRDIS		0x0004		/* Write Disable */
+#define SFLASH_ST_RDSR		0x0105		/* Read Status Register */
+#define SFLASH_ST_WRSR		0x0101		/* Write Status Register */
+#define SFLASH_ST_READ		0x0303		/* Read Data Bytes */
+#define SFLASH_ST_PP		0x0302		/* Page Program */
+#define SFLASH_ST_SE		0x02d8		/* Sector Erase */
+#define SFLASH_ST_BE		0x00c7		/* Bulk Erase */
+#define SFLASH_ST_DP		0x00b9		/* Deep Power-down */
+#define SFLASH_ST_RES		0x03ab		/* Read Electronic Signature */
+
+/* Status register bits for ST flashes */
+#define SFLASH_ST_WIP		0x01		/* Write In Progress */
+#define SFLASH_ST_WEL		0x02		/* Write Enable Latch */
+#define SFLASH_ST_BP_MASK	0x1c		/* Block Protect */
+#define SFLASH_ST_BP_SHIFT	2
+#define SFLASH_ST_SRWD		0x80		/* Status Register Write Disable */
+
+/* flashcontrol opcodes for Atmel flashes */
+#define SFLASH_AT_READ				0x07e8
+#define SFLASH_AT_PAGE_READ			0x07d2
+#define SFLASH_AT_BUF1_READ
+#define SFLASH_AT_BUF2_READ
+#define SFLASH_AT_STATUS			0x01d7
+#define SFLASH_AT_BUF1_WRITE			0x0384
+#define SFLASH_AT_BUF2_WRITE			0x0387
+#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
+#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
+#define SFLASH_AT_BUF1_PROGRAM			0x0288
+#define SFLASH_AT_BUF2_PROGRAM			0x0289
+#define SFLASH_AT_PAGE_ERASE			0x0281
+#define SFLASH_AT_BLOCK_ERASE			0x0250
+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
+#define SFLASH_AT_BUF1_LOAD			0x0253
+#define SFLASH_AT_BUF2_LOAD			0x0255
+#define SFLASH_AT_BUF1_COMPARE			0x0260
+#define SFLASH_AT_BUF2_COMPARE			0x0261
+#define SFLASH_AT_BUF1_REPROGRAM		0x0258
+#define SFLASH_AT_BUF2_REPROGRAM		0x0259
+
+/* Status register bits for Atmel flashes */
+#define SFLASH_AT_READY				0x80
+#define SFLASH_AT_MISMATCH			0x40
+#define SFLASH_AT_ID_MASK			0x38
+#define SFLASH_AT_ID_SHIFT			3
+
+/* OTP regions */
+#define	OTP_HW_REGION	OTPS_HW_PROTECT
+#define	OTP_SW_REGION	OTPS_SW_PROTECT
+#define	OTP_CID_REGION	OTPS_CID_PROTECT
+
+/* OTP regions (Byte offsets from otp size) */
+#define	OTP_SWLIM_OFF	(-8)
+#define	OTP_CIDBASE_OFF	0
+#define	OTP_CIDLIM_OFF	8
+
+/* Predefined OTP words (Word offset from otp size) */
+#define	OTP_BOUNDARY_OFF (-4)
+#define	OTP_HWSIGN_OFF	(-3)
+#define	OTP_SWSIGN_OFF	(-2)
+#define	OTP_CIDSIGN_OFF	(-1)
+
+#define	OTP_CID_OFF	0
+#define	OTP_PKG_OFF	1
+#define	OTP_FID_OFF	2
+#define	OTP_RSV_OFF	3
+#define	OTP_LIM_OFF	4
+
+#define	OTP_SIGNATURE	0x578a
+#define	OTP_MAGIC	0x4e56
+
+#endif	/* _SBCHIPC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
--- linux.old/arch/mips/bcm947xx/include/sbconfig.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,342 @@
+/*
+ * Broadcom SiliconBackplane hardware register definitions.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_SBCONFIG_H
+#define	_SBCONFIG_H
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/*
+ * SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
+#define SB_PCI_MEM		0x08000000	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define SB_PCI_CFG		0x0c000000	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
+#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
+#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */
+
+#define	SB_FLASH2		0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
+#define	SB_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
+
+#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
+#define	SB_FLASH1		0x1fc00000	/* Flash Region 1 */
+#define	SB_FLASH1_SZ		0x00400000	/* Size of Flash Region 1 */
+
+#define SB_PCI_DMA		0x40000000	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define SB_PCI_DMA_SZ		0x40000000	/* Client Mode sb2pcitranslation2 size in bytes */
+#define SB_PCIE_DMA_L32		0x00000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
+#define SB_PCIE_DMA_H32		0x80000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
+#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)
+
+
+/* enumeration space related defs */
+#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
+#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
+#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
+#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */
+
+/* mips address */
+#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
+
+/*
+ * Sonics Configuration Space Registers.
+ */
+#define SBIPSFLAG		0x08
+#define SBTPSFLAG		0x18
+#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
+#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
+#define SBADMATCH3		0x60
+#define SBADMATCH2		0x68
+#define SBADMATCH1		0x70
+#define SBIMSTATE		0x90
+#define SBINTVEC		0x94
+#define SBTMSTATELOW		0x98
+#define SBTMSTATEHIGH		0x9c
+#define SBBWA0			0xa0
+#define SBIMCONFIGLOW		0xa8
+#define SBIMCONFIGHIGH		0xac
+#define SBADMATCH0		0xb0
+#define SBTMCONFIGLOW		0xb8
+#define SBTMCONFIGHIGH		0xbc
+#define SBBCONFIG		0xc0
+#define SBBSTATE		0xc8
+#define SBACTCNFG		0xd8
+#define	SBFLAGST		0xe8
+#define SBIDLOW			0xf8
+#define SBIDHIGH		0xfc
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct _sbconfig {
+	uint32	PAD[2];
+	uint32	sbipsflag;		/* initiator port ocp slave flag */
+	uint32	PAD[3];
+	uint32	sbtpsflag;		/* target port ocp slave flag */
+	uint32	PAD[11];
+	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
+	uint32	PAD;
+	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
+	uint32	PAD[3];
+	uint32	sbadmatch3;		/* address match3 */
+	uint32	PAD;
+	uint32	sbadmatch2;		/* address match2 */
+	uint32	PAD;
+	uint32	sbadmatch1;		/* address match1 */
+	uint32	PAD[7];
+	uint32	sbimstate;		/* initiator agent state */
+	uint32	sbintvec;		/* interrupt mask */
+	uint32	sbtmstatelow;		/* target state */
+	uint32	sbtmstatehigh;		/* target state */
+	uint32	sbbwa0;			/* bandwidth allocation table0 */
+	uint32	PAD;
+	uint32	sbimconfiglow;		/* initiator configuration */
+	uint32	sbimconfighigh;		/* initiator configuration */
+	uint32	sbadmatch0;		/* address match0 */
+	uint32	PAD;
+	uint32	sbtmconfiglow;		/* target configuration */
+	uint32	sbtmconfighigh;		/* target configuration */
+	uint32	sbbconfig;		/* broadcast configuration */
+	uint32	PAD;
+	uint32	sbbstate;		/* broadcast state */
+	uint32	PAD[3];
+	uint32	sbactcnfg;		/* activate configuration */
+	uint32	PAD[3];
+	uint32	sbflagst;		/* current sbflags */
+	uint32	PAD[3];
+	uint32	sbidlow;		/* identification */
+	uint32	sbidhigh;		/* identification */
+} sbconfig_t;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+/* sbipsflag */
+#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
+#define	SBIPS_INT1_SHIFT	0
+#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
+#define	SBIPS_INT2_SHIFT	8
+#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
+#define	SBIPS_INT3_SHIFT	16
+#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
+#define	SBIPS_INT4_SHIFT	24
+
+/* sbtpsflag */
+#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
+#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */
+
+/* sbtmerrlog */
+#define	SBTMEL_CM		0x00000007	/* command */
+#define	SBTMEL_CI		0x0000ff00	/* connection id */
+#define	SBTMEL_EC		0x0f000000	/* error code */
+#define	SBTMEL_ME		0x80000000	/* multiple error */
+
+/* sbimstate */
+#define	SBIM_PC			0xf		/* pipecount */
+#define	SBIM_AP_MASK		0x30		/* arbitration policy */
+#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
+#define	SBIM_AP_TS		0x10		/* use timesliaces only */
+#define	SBIM_AP_TK		0x20		/* use token only */
+#define	SBIM_AP_RSV		0x30		/* reserved */
+#define	SBIM_IBE		0x20000		/* inbanderror */
+#define	SBIM_TO			0x40000		/* timeout */
+#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
+#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */
+
+/* sbtmstatelow */
+#define	SBTML_RESET		0x1		/* reset */
+#define	SBTML_REJ_MASK		0x6		/* reject */
+#define	SBTML_REJ_SHIFT		1
+#define	SBTML_CLK		0x10000		/* clock enable */
+#define	SBTML_FGC		0x20000		/* force gated clocks on */
+#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
+#define	SBTML_PE		0x40000000	/* pme enable */
+#define	SBTML_BE		0x80000000	/* bist enable */
+
+/* sbtmstatehigh */
+#define	SBTMH_SERR		0x1		/* serror */
+#define	SBTMH_INT		0x2		/* interrupt */
+#define	SBTMH_BUSY		0x4		/* busy */
+#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
+#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
+#define SBTMH_DMA64		0x10000000      /* supports DMA with 64-bit addresses */
+#define	SBTMH_GCR		0x20000000	/* gated clock request */
+#define	SBTMH_BISTF		0x40000000	/* bist failed */
+#define	SBTMH_BISTD		0x80000000	/* bist done */
+
+
+/* sbbwa0 */
+#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
+#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
+#define	SBBWA_TAB1_SHIFT	16
+
+/* sbimconfiglow */
+#define	SBIMCL_STO_MASK		0x7		/* service timeout */
+#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
+#define	SBIMCL_RTO_SHIFT	4
+#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
+#define	SBIMCL_CID_SHIFT	16
+
+/* sbimconfighigh */
+#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
+#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
+#define	SBIMCH_TEM_SHIFT	4
+#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
+#define	SBIMCH_BEM_SHIFT	6
+
+/* sbadmatch0 */
+#define	SBAM_TYPE_MASK		0x3		/* address type */
+#define	SBAM_AD64		0x4		/* reserved */
+#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
+#define	SBAM_ADINT0_SHIFT	3
+#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
+#define	SBAM_ADINT1_SHIFT	3
+#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
+#define	SBAM_ADINT2_SHIFT	3
+#define	SBAM_ADEN		0x400		/* enable */
+#define	SBAM_ADNEG		0x800		/* negative decode */
+#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
+#define	SBAM_BASE0_SHIFT	8
+#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
+#define	SBAM_BASE1_SHIFT	12
+#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
+#define	SBAM_BASE2_SHIFT	16
+
+/* sbtmconfiglow */
+#define	SBTMCL_CD_MASK		0xff		/* clock divide */
+#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
+#define	SBTMCL_CO_SHIFT		11
+#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
+#define	SBTMCL_IF_SHIFT		18
+#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
+#define	SBTMCL_IM_SHIFT		24
+
+/* sbtmconfighigh */
+#define	SBTMCH_BM_MASK		0x3		/* busy mode */
+#define	SBTMCH_RM_MASK		0x3		/* retry mode */
+#define	SBTMCH_RM_SHIFT		2
+#define	SBTMCH_SM_MASK		0x30		/* stop mode */
+#define	SBTMCH_SM_SHIFT		4
+#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
+#define	SBTMCH_EM_SHIFT		8
+#define	SBTMCH_IM_MASK		0xc00		/* int mode */
+#define	SBTMCH_IM_SHIFT		10
+
+/* sbbconfig */
+#define	SBBC_LAT_MASK		0x3		/* sb latency */
+#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
+#define	SBBC_MAX0_SHIFT		16
+#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
+#define	SBBC_MAX1_SHIFT		20
+
+/* sbbstate */
+#define	SBBS_SRD		0x1		/* st reg disable */
+#define	SBBS_HRD		0x2		/* hold reg disable */
+
+/* sbidlow */
+#define	SBIDL_CS_MASK		0x3		/* config space */
+#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
+#define	SBIDL_AR_SHIFT		3
+#define	SBIDL_SYNCH		0x40		/* sync */
+#define	SBIDL_INIT		0x80		/* initiator */
+#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
+#define	SBIDL_MINLAT_SHIFT	8
+#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
+#define	SBIDL_MAXLAT_SHIFT	12
+#define	SBIDL_FIRST		0x10000		/* this initiator is first */
+#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
+#define	SBIDL_CW_SHIFT		18
+#define	SBIDL_TP_MASK		0xf00000	/* target ports */
+#define	SBIDL_TP_SHIFT		20
+#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
+#define	SBIDL_IP_SHIFT		24
+#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
+#define	SBIDL_RV_SHIFT		28
+#define	SBIDL_RV_2_2		0x00000000	/* version 2.2 or earlier */
+#define	SBIDL_RV_2_3		0x10000000	/* version 2.3 */
+
+/* sbidhigh */
+#define	SBIDH_RC_MASK		0x000f		/* revision code */
+#define	SBIDH_RCE_MASK		0x7000		/* revision code extension field */
+#define	SBIDH_RCE_SHIFT		8
+#define	SBCOREREV(sbidh) \
+	((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
+#define	SBIDH_CC_MASK		0x8ff0		/* core code */
+#define	SBIDH_CC_SHIFT		4
+#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
+#define	SBIDH_VC_SHIFT		16
+
+#define	SB_COMMIT		0xfd8		/* update buffered registers value */
+
+/* vendor codes */
+#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */
+
+/* core codes */
+#define	SB_CC			0x800		/* chipcommon core */
+#define	SB_ILINE20		0x801		/* iline20 core */
+#define	SB_SDRAM		0x803		/* sdram core */
+#define	SB_PCI			0x804		/* pci core */
+#define	SB_MIPS			0x805		/* mips core */
+#define	SB_ENET			0x806		/* enet mac core */
+#define	SB_CODEC		0x807		/* v90 codec core */
+#define	SB_USB			0x808		/* usb 1.1 host/device core */
+#define	SB_ADSL			0x809		/* ADSL core */
+#define	SB_ILINE100		0x80a		/* iline100 core */
+#define	SB_IPSEC		0x80b		/* ipsec core */
+#define	SB_PCMCIA		0x80d		/* pcmcia core */
+#define	SB_SOCRAM		0x80e		/* internal memory core */
+#define	SB_MEMC			0x80f		/* memc sdram core */
+#define	SB_EXTIF		0x811		/* external interface core */
+#define	SB_D11			0x812		/* 802.11 MAC core */
+#define	SB_MIPS33		0x816		/* mips3302 core */
+#define	SB_USB11H		0x817		/* usb 1.1 host core */
+#define	SB_USB11D		0x818		/* usb 1.1 device core */
+#define	SB_USB20H		0x819		/* usb 2.0 host core */
+#define	SB_USB20D		0x81a		/* usb 2.0 device core */
+#define	SB_SDIOH		0x81b		/* sdio host core */
+#define	SB_ROBO			0x81c		/* roboswitch core */
+#define	SB_ATA100		0x81d		/* parallel ATA core */
+#define	SB_SATAXOR		0x81e		/* serial ATA & XOR DMA core */
+#define	SB_GIGETH		0x81f		/* gigabit ethernet core */
+#define	SB_PCIE			0x820		/* pci express core */
+#define	SB_SRAMC		0x822		/* SRAM controller core */
+#define	SB_MINIMAC		0x823		/* MINI MAC/phy core */
+
+#define	SB_CC_IDX		0		/* chipc, when present, is always core 0 */
+
+/* Not really related to Silicon Backplane, but a couple of software
+ * conventions for the use the flash space:
+ */
+
+/* Minumum amount of flash we support */
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+/* A boot/binary may have an embedded block that describes its size  */
+#define	BISZ_OFFSET		0x3e0		/* At this offset into the binary */
+#define	BISZ_MAGIC		0x4249535a	/* Marked with this value: 'BISZ' */
+#define	BISZ_MAGIC_IDX		0		/* Word 0: magic */
+#define	BISZ_TXTST_IDX		1		/*	1: text start */
+#define	BISZ_TXTEND_IDX		2		/*	2: text start */
+#define	BISZ_DATAST_IDX		3		/*	3: text start */
+#define	BISZ_DATAEND_IDX	4		/*	4: text start */
+#define	BISZ_BSSST_IDX		5		/*	5: text start */
+#define	BISZ_BSSEND_IDX		6		/*	6: text start */
+#define BISZ_SIZE		7		/* descriptor size in 32-bit intergers */
+
+#endif	/* _SBCONFIG_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
--- linux.old/arch/mips/bcm947xx/include/sbextif.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbextif.h	2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,242 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_SBEXTIF_H
+#define	_SBEXTIF_H
+
+/* external interface address space */
+#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
+#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
+#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
+#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
+#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+/*
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ */
+struct gpiouser {
+	uint32	out;
+	uint32	outen;
+};
+#define	NGPIOUSER	5
+
+typedef volatile struct {
+	uint32	corecontrol;
+	uint32	extstatus;
+	uint32	PAD[2];
+
+	/* pcmcia control registers */
+	uint32	pcmcia_config;
+	uint32	pcmcia_memwait;
+	uint32	pcmcia_attrwait;
+	uint32	pcmcia_iowait;
+
+	/* programmable interface control registers */
+	uint32	prog_config;
+	uint32	prog_waitcount;
+
+	/* flash control registers */
+	uint32	flash_config;
+	uint32	flash_waitcount;
+	uint32	PAD[4];
+
+	uint32	watchdog;
+
+	/* clock control */
+	uint32	clockcontrol_n;
+	uint32	clockcontrol_sb;
+	uint32	clockcontrol_pci;
+	uint32	clockcontrol_mii;
+	uint32	PAD[3];
+
+	/* gpio */
+	uint32	gpioin;
+	struct gpiouser	gpio[NGPIOUSER];
+	uint32	PAD;
+	uint32	ejtagouten;
+	uint32	gpiointpolarity;
+	uint32	gpiointmask;
+	uint32	PAD[153];
+
+	uint8	uartdata;
+	uint8	PAD[3];
+	uint8	uartimer;
+	uint8	PAD[3];
+	uint8	uartfcr;
+	uint8	PAD[3];
+	uint8	uartlcr;
+	uint8	PAD[3];
+	uint8	uartmcr;
+	uint8	PAD[3];
+	uint8	uartlsr;
+	uint8	PAD[3];
+	uint8	uartmsr;
+	uint8	PAD[3];
+	uint8	uartscratch;
+	uint8	PAD[3];
+} extifregs_t;
+
+/* corecontrol */
+#define	CC_UE		(1 << 0)		/* uart enable */
+
+/* extstatus */
+#define	ES_EM		(1 << 0)		/* endian mode (ro) */
+#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
+#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
+
+/* gpio bit mask */
+#define GPIO_BIT0	(1 << 0)
+#define GPIO_BIT1	(1 << 1)
+#define GPIO_BIT2	(1 << 2)
+#define GPIO_BIT3	(1 << 3)
+#define GPIO_BIT4	(1 << 4)
+#define GPIO_BIT5	(1 << 5)
+#define GPIO_BIT6	(1 << 6)
+#define GPIO_BIT7	(1 << 7)
+
+
+/* pcmcia/prog/flash_config */
+#define	CF_EN		(1 << 0)		/* enable */
+#define	CF_EM_MASK	0xe			/* mode */
+#define	CF_EM_SHIFT	1
+#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
+#define	CF_EM_SYNC	0x2			/* synchronous mode */
+#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
+#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
+#define	CF_BS		(1 << 5)		/* byteswap */
+#define	CF_CD_MASK	0xc0			/* clock divider */
+#define	CF_CD_SHIFT	6
+#define	CF_CD_DIV2	0x0			/* backplane/2 */
+#define	CF_CD_DIV3	0x40			/* backplane/3 */
+#define	CF_CD_DIV4	0x80			/* backplane/4 */
+#define	CF_CE		(1 << 8)		/* clock enable */
+#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define	PM_W0_MASK	0x3f			/* waitcount0 */
+#define	PM_W1_MASK	0x1f00			/* waitcount1 */
+#define	PM_W1_SHIFT	8
+#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PM_W2_SHIFT	16
+#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PM_W3_SHIFT	24
+
+/* pcmcia_attrwait */
+#define	PA_W0_MASK	0x3f			/* waitcount0 */
+#define	PA_W1_MASK	0x1f00			/* waitcount1 */
+#define	PA_W1_SHIFT	8
+#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PA_W2_SHIFT	16
+#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PA_W3_SHIFT	24
+
+/* pcmcia_iowait */
+#define	PI_W0_MASK	0x3f			/* waitcount0 */
+#define	PI_W1_MASK	0x1f00			/* waitcount1 */
+#define	PI_W1_SHIFT	8
+#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
+#define	PI_W2_SHIFT	16
+#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PI_W3_SHIFT	24
+
+/* prog_waitcount */
+#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
+#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
+#define	PW_W1_SHIFT	8
+#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
+#define	PW_W2_SHIFT	16
+#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
+#define	PW_W3_SHIFT	24
+
+#define PW_W0       0x0000000c
+#define PW_W1       0x00000a00
+#define PW_W2       0x00020000
+#define PW_W3       0x01000000
+
+/* flash_waitcount */
+#define	FW_W0_MASK	0x1f			/* waitcount0 */
+#define	FW_W1_MASK	0x1f00			/* waitcount1 */
+#define	FW_W1_SHIFT	8
+#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
+#define	FW_W2_SHIFT	16
+#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
+#define	FW_W3_SHIFT	24
+
+/* watchdog */
+#define WATCHDOG_CLOCK	48000000		/* Hz */
+
+/* clockcontrol_n */
+#define	CN_N1_MASK	0x3f			/* n1 control */
+#define	CN_N2_MASK	0x3f00			/* n2 control */
+#define	CN_N2_SHIFT	8
+
+/* clockcontrol_sb/pci/mii */
+#define	CC_M1_MASK	0x3f			/* m1 control */
+#define	CC_M2_MASK	0x3f00			/* m2 control */
+#define	CC_M2_SHIFT	8
+#define	CC_M3_MASK	0x3f0000		/* m3 control */
+#define	CC_M3_SHIFT	16
+#define	CC_MC_MASK	0x1f000000		/* mux control */
+#define	CC_MC_SHIFT	24
+
+/* Clock control default values */
+#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
+#define CC_DEF_100	0x04020011
+#define CC_DEF_33	0x11030011
+#define CC_DEF_25	0x11050011
+
+/* Clock control values for 125Mhz */
+#define	CC_125_N	0x0802
+#define	CC_125_M	0x04020009
+#define	CC_125_M25	0x11090009
+#define	CC_125_M33	0x11090005
+
+/* Clock control magic field values */
+#define	CC_F6_2		0x02			/* A factor of 2 in */
+#define	CC_F6_3		0x03			/*  6-bit fields like */
+#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
+#define	CC_F6_5		0x09
+#define	CC_F6_6		0x11
+#define	CC_F6_7		0x21
+
+#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
+
+#define	CC_MC_BYPASS	0x08
+#define	CC_MC_M1	0x04
+#define	CC_MC_M1M2	0x02
+#define	CC_MC_M1M2M3	0x01
+#define	CC_MC_M1M3	0x11
+
+#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
+
+#endif	/* _SBEXTIF_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbhnddma.h linux.dev/arch/mips/bcm947xx/include/sbhnddma.h
--- linux.old/arch/mips/bcm947xx/include/sbhnddma.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbhnddma.h	2005-11-07 23:37:03.453685750 +0100
@@ -0,0 +1,312 @@
+/*
+ * Generic Broadcom Home Networking Division (HND) DMA engine HW interface
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_sbhnddma_h_
+#define	_sbhnddma_h_
+
+ 
+/* 2byte-wide pio register set per channel(xmt or rcv) */
+typedef volatile struct {
+	uint16	fifocontrol;
+	uint16	fifodata;
+	uint16	fifofree;	/* only valid in xmt channel, not in rcv channel */
+	uint16	PAD;
+} pio2regs_t;
+
+/* a pair of pio channels(tx and rx) */
+typedef volatile struct {
+	pio2regs_t	tx;
+	pio2regs_t	rx;
+} pio2regp_t;
+
+/* 4byte-wide pio register set per channel(xmt or rcv) */
+typedef volatile struct {
+	uint32	fifocontrol;
+	uint32	fifodata;
+} pio4regs_t;
+
+/* a pair of pio channels(tx and rx) */
+typedef volatile struct {
+	pio4regs_t	tx;
+	pio4regs_t	rx;
+} pio4regp_t;
+
+
+
+/* DMA structure:
+ *  support two DMA engines: 32 bits address or 64 bit addressing
+ *  basic DMA register set is per channel(transmit or receive)
+ *  a pair of channels is defined for convenience
+ */
+
+
+/*** 32 bits addressing ***/ 
+
+/* dma registers per channel(xmt or rcv) */
+typedef volatile struct {
+	uint32	control;		/* enable, et al */
+	uint32	addr;			/* descriptor ring base address (4K aligned) */
+	uint32	ptr;			/* last descriptor posted to chip */
+	uint32	status;			/* current active descriptor, et al */
+} dma32regs_t;
+
+typedef volatile struct {
+	dma32regs_t	xmt;		/* dma tx channel */
+	dma32regs_t	rcv;		/* dma rx channel */
+} dma32regp_t;
+
+typedef volatile struct {	/* diag access */
+	uint32	fifoaddr;		/* diag address */
+	uint32	fifodatalow;		/* low 32bits of data */
+	uint32	fifodatahigh;		/* high 32bits of data */
+	uint32	pad;			/* reserved */
+} dma32diag_t;
+
+/*
+ * DMA Descriptor
+ * Descriptors are only read by the hardware, never written back.
+ */
+typedef volatile struct {
+	uint32	ctrl;		/* misc control bits & bufcount */
+	uint32	addr;		/* data buffer address */
+} dma32dd_t;
+
+/*
+ * Each descriptor ring must be 4096byte aligned, and fit within a single 4096byte page.
+ */
+#define	D32MAXRINGSZ	4096
+#define	D32RINGALIGN	4096
+#define	D32MAXDD	(D32MAXRINGSZ / sizeof (dma32dd_t))
+
+/* transmit channel control */
+#define	XC_XE		((uint32)1 << 0)	/* transmit enable */
+#define	XC_SE		((uint32)1 << 1)	/* transmit suspend request */
+#define	XC_LE		((uint32)1 << 2)	/* loopback enable */
+#define	XC_FL		((uint32)1 << 4)	/* flush request */
+#define	XC_AE		((uint32)3 << 16)	/* address extension bits */
+#define	XC_AE_SHIFT	16
+
+/* transmit descriptor table pointer */
+#define	XP_LD_MASK	0xfff			/* last valid descriptor */
+
+/* transmit channel status */
+#define	XS_CD_MASK	0x0fff			/* current descriptor pointer */
+#define	XS_XS_MASK	0xf000			/* transmit state */
+#define	XS_XS_SHIFT	12
+#define	XS_XS_DISABLED	0x0000			/* disabled */
+#define	XS_XS_ACTIVE	0x1000			/* active */
+#define	XS_XS_IDLE	0x2000			/* idle wait */
+#define	XS_XS_STOPPED	0x3000			/* stopped */
+#define	XS_XS_SUSP	0x4000			/* suspend pending */
+#define	XS_XE_MASK	0xf0000			/* transmit errors */
+#define	XS_XE_SHIFT	16
+#define	XS_XE_NOERR	0x00000			/* no error */
+#define	XS_XE_DPE	0x10000			/* descriptor protocol error */
+#define	XS_XE_DFU	0x20000			/* data fifo underrun */
+#define	XS_XE_BEBR	0x30000			/* bus error on buffer read */
+#define	XS_XE_BEDA	0x40000			/* bus error on descriptor access */
+#define	XS_AD_MASK	0xfff00000		/* active descriptor */
+#define	XS_AD_SHIFT	20
+
+/* receive channel control */
+#define	RC_RE		((uint32)1 << 0)	/* receive enable */
+#define	RC_RO_MASK	0xfe			/* receive frame offset */
+#define	RC_RO_SHIFT	1
+#define	RC_FM		((uint32)1 << 8)	/* direct fifo receive (pio) mode */
+#define	RC_AE		((uint32)3 << 16)	/* address extension bits */
+#define	RC_AE_SHIFT	16
+
+/* receive descriptor table pointer */
+#define	RP_LD_MASK	0xfff			/* last valid descriptor */
+
+/* receive channel status */
+#define	RS_CD_MASK	0x0fff			/* current descriptor pointer */
+#define	RS_RS_MASK	0xf000			/* receive state */
+#define	RS_RS_SHIFT	12
+#define	RS_RS_DISABLED	0x0000			/* disabled */
+#define	RS_RS_ACTIVE	0x1000			/* active */
+#define	RS_RS_IDLE	0x2000			/* idle wait */
+#define	RS_RS_STOPPED	0x3000			/* reserved */
+#define	RS_RE_MASK	0xf0000			/* receive errors */
+#define	RS_RE_SHIFT	16
+#define	RS_RE_NOERR	0x00000			/* no error */
+#define	RS_RE_DPE	0x10000			/* descriptor protocol error */
+#define	RS_RE_DFO	0x20000			/* data fifo overflow */
+#define	RS_RE_BEBW	0x30000			/* bus error on buffer write */
+#define	RS_RE_BEDA	0x40000			/* bus error on descriptor access */
+#define	RS_AD_MASK	0xfff00000		/* active descriptor */
+#define	RS_AD_SHIFT	20
+
+/* fifoaddr */
+#define	FA_OFF_MASK	0xffff			/* offset */
+#define	FA_SEL_MASK	0xf0000			/* select */
+#define	FA_SEL_SHIFT	16
+#define	FA_SEL_XDD	0x00000			/* transmit dma data */
+#define	FA_SEL_XDP	0x10000			/* transmit dma pointers */
+#define	FA_SEL_RDD	0x40000			/* receive dma data */
+#define	FA_SEL_RDP	0x50000			/* receive dma pointers */
+#define	FA_SEL_XFD	0x80000			/* transmit fifo data */
+#define	FA_SEL_XFP	0x90000			/* transmit fifo pointers */
+#define	FA_SEL_RFD	0xc0000			/* receive fifo data */
+#define	FA_SEL_RFP	0xd0000			/* receive fifo pointers */
+#define	FA_SEL_RSD	0xe0000			/* receive frame status data */
+#define	FA_SEL_RSP	0xf0000			/* receive frame status pointers */
+
+/* descriptor control flags */
+#define	CTRL_BC_MASK	0x1fff			/* buffer byte count */
+#define	CTRL_AE		((uint32)3 << 16)	/* address extension bits */
+#define	CTRL_AE_SHIFT	16
+#define	CTRL_EOT	((uint32)1 << 28)	/* end of descriptor table */
+#define	CTRL_IOC	((uint32)1 << 29)	/* interrupt on completion */
+#define	CTRL_EOF	((uint32)1 << 30)	/* end of frame */
+#define	CTRL_SOF	((uint32)1 << 31)	/* start of frame */
+
+/* control flags in the range [27:20] are core-specific and not defined here */
+#define	CTRL_CORE_MASK	0x0ff00000
+
+/*** 64 bits addressing ***/
+
+/* dma registers per channel(xmt or rcv) */
+typedef volatile struct {
+	uint32	control;		/* enable, et al */
+	uint32	ptr;			/* last descriptor posted to chip */
+	uint32	addrlow;		/* descriptor ring base address low 32-bits (8K aligned) */
+	uint32	addrhigh;		/* descriptor ring base address bits 63:32 (8K aligned) */
+	uint32	status0;		/* current descriptor, xmt state */
+	uint32	status1;		/* active descriptor, xmt error */
+} dma64regs_t;
+
+typedef volatile struct {
+	dma64regs_t	tx;		/* dma64 tx channel */
+	dma64regs_t	rx;		/* dma64 rx channel */
+} dma64regp_t;
+
+typedef volatile struct {		/* diag access */
+	uint32	fifoaddr;		/* diag address */
+	uint32	fifodatalow;		/* low 32bits of data */
+	uint32	fifodatahigh;		/* high 32bits of data */
+	uint32	pad;			/* reserved */
+} dma64diag_t;
+
+/*
+ * DMA Descriptor
+ * Descriptors are only read by the hardware, never written back.
+ */
+typedef volatile struct {
+	uint32	ctrl1;		/* misc control bits & bufcount */
+	uint32	ctrl2;		/* buffer count and address extension */
+	uint32	addrlow;	/* memory address of the first byte of the date buffer, bits 31:0 */
+	uint32	addrhigh;	/* memory address of the first byte of the date buffer, bits 63:32 */
+} dma64dd_t;
+
+/*
+ * Each descriptor ring must be 8kB aligned, and fit within a contiguous 8kB physical addresss.
+ */
+#define	D64MAXRINGSZ	8192
+#define	D64RINGALIGN	8192
+#define	D64MAXDD	(D64MAXRINGSZ / sizeof (dma64dd_t))
+
+/* transmit channel control */
+#define	D64_XC_XE		0x00000001	/* transmit enable */
+#define	D64_XC_SE		0x00000002	/* transmit suspend request */
+#define	D64_XC_LE		0x00000004	/* loopback enable */
+#define	D64_XC_FL		0x00000010	/* flush request */
+#define	D64_XC_AE		0x00110000	/* address extension bits */
+#define	D64_XC_AE_SHIFT		16
+
+/* transmit descriptor table pointer */
+#define	D64_XP_LD_MASK		0x00000fff	/* last valid descriptor */
+
+/* transmit channel status */
+#define	D64_XS0_CD_MASK		0x00001fff	/* current descriptor pointer */
+#define	D64_XS0_XS_MASK		0xf0000000     	/* transmit state */
+#define	D64_XS0_XS_SHIFT		28
+#define	D64_XS0_XS_DISABLED	0x00000000	/* disabled */
+#define	D64_XS0_XS_ACTIVE	0x10000000	/* active */
+#define	D64_XS0_XS_IDLE		0x20000000	/* idle wait */
+#define	D64_XS0_XS_STOPPED	0x30000000	/* stopped */
+#define	D64_XS0_XS_SUSP		0x40000000	/* suspend pending */
+
+#define	D64_XS1_AD_MASK		0x0001ffff	/* active descriptor */
+#define	D64_XS1_XE_MASK		0xf0000000     	/* transmit errors */
+#define	D64_XS1_XE_SHIFT		28
+#define	D64_XS1_XE_NOERR	0x00000000	/* no error */
+#define	D64_XS1_XE_DPE		0x10000000	/* descriptor protocol error */
+#define	D64_XS1_XE_DFU		0x20000000	/* data fifo underrun */
+#define	D64_XS1_XE_DTE		0x30000000	/* data transfer error */
+#define	D64_XS1_XE_DESRE	0x40000000	/* descriptor read error */
+#define	D64_XS1_XE_COREE	0x50000000	/* core error */
+
+/* receive channel control */
+#define	D64_RC_RE		0x00000001	/* receive enable */
+#define	D64_RC_RO_MASK		0x000000fe	/* receive frame offset */
+#define	D64_RC_RO_SHIFT		1
+#define	D64_RC_FM		0x00000100	/* direct fifo receive (pio) mode */
+#define	D64_RC_AE		0x00110000	/* address extension bits */
+#define	D64_RC_AE_SHIFT		16
+
+/* receive descriptor table pointer */
+#define	D64_RP_LD_MASK		0x00000fff	/* last valid descriptor */
+
+/* receive channel status */
+#define	D64_RS0_CD_MASK		0x00001fff	/* current descriptor pointer */
+#define	D64_RS0_RS_MASK		0xf0000000     	/* receive state */
+#define	D64_RS0_RS_SHIFT		28
+#define	D64_RS0_RS_DISABLED	0x00000000	/* disabled */
+#define	D64_RS0_RS_ACTIVE	0x10000000	/* active */
+#define	D64_RS0_RS_IDLE		0x20000000	/* idle wait */
+#define	D64_RS0_RS_STOPPED	0x30000000	/* stopped */
+#define	D64_RS0_RS_SUSP		0x40000000	/* suspend pending */
+
+#define	D64_RS1_AD_MASK		0x0001ffff	/* active descriptor */
+#define	D64_RS1_RE_MASK		0xf0000000     	/* receive errors */
+#define	D64_RS1_RE_SHIFT		28
+#define	D64_RS1_RE_NOERR	0x00000000	/* no error */
+#define	D64_RS1_RE_DPO		0x10000000	/* descriptor protocol error */
+#define	D64_RS1_RE_DFU		0x20000000	/* data fifo overflow */
+#define	D64_RS1_RE_DTE		0x30000000	/* data transfer error */
+#define	D64_RS1_RE_DESRE	0x40000000	/* descriptor read error */
+#define	D64_RS1_RE_COREE	0x50000000	/* core error */
+
+/* fifoaddr */
+#define	D64_FA_OFF_MASK		0xffff		/* offset */
+#define	D64_FA_SEL_MASK		0xf0000		/* select */
+#define	D64_FA_SEL_SHIFT	16
+#define	D64_FA_SEL_XDD		0x00000		/* transmit dma data */
+#define	D64_FA_SEL_XDP		0x10000		/* transmit dma pointers */
+#define	D64_FA_SEL_RDD		0x40000		/* receive dma data */
+#define	D64_FA_SEL_RDP		0x50000		/* receive dma pointers */
+#define	D64_FA_SEL_XFD		0x80000		/* transmit fifo data */
+#define	D64_FA_SEL_XFP		0x90000		/* transmit fifo pointers */
+#define	D64_FA_SEL_RFD		0xc0000		/* receive fifo data */
+#define	D64_FA_SEL_RFP		0xd0000		/* receive fifo pointers */
+#define	D64_FA_SEL_RSD		0xe0000		/* receive frame status data */
+#define	D64_FA_SEL_RSP		0xf0000		/* receive frame status pointers */
+
+/* descriptor control flags 1 */
+#define	D64_CTRL1_EOT		((uint32)1 << 28)	/* end of descriptor table */
+#define	D64_CTRL1_IOC		((uint32)1 << 29)	/* interrupt on completion */
+#define	D64_CTRL1_EOF		((uint32)1 << 30)	/* end of frame */
+#define	D64_CTRL1_SOF		((uint32)1 << 31)	/* start of frame */
+
+/* descriptor control flags 2 */
+#define	D64_CTRL2_BC_MASK	0x00007fff	/* buffer byte count mask */
+#define	D64_CTRL2_AE		0x00110000	/* address extension bits */
+#define	D64_CTRL2_AE_SHIFT	16
+
+/* control flags in the range [27:20] are core-specific and not defined here */
+#define	D64_CTRL_CORE_MASK	0x0ff00000
+
+
+#endif	/* _sbhnddma_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
--- linux.old/arch/mips/bcm947xx/include/sbmemc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,148 @@
+/*
+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#ifndef	_SBMEMC_H
+#define	_SBMEMC_H
+
+#ifdef _LANGUAGE_ASSEMBLY
+
+#define	MEMC_CONTROL		0x00
+#define	MEMC_CONFIG		0x04
+#define	MEMC_REFRESH		0x08
+#define	MEMC_BISTSTAT		0x0c
+#define	MEMC_MODEBUF		0x10
+#define	MEMC_BKCLS		0x14
+#define	MEMC_PRIORINV		0x18
+#define	MEMC_DRAMTIM		0x1c
+#define	MEMC_INTSTAT		0x20
+#define	MEMC_INTMASK		0x24
+#define	MEMC_INTINFO		0x28
+#define	MEMC_NCDLCTL		0x30
+#define	MEMC_RDNCDLCOR		0x34
+#define	MEMC_WRNCDLCOR		0x38
+#define	MEMC_MISCDLYCTL		0x3c
+#define	MEMC_DQSGATENCDL	0x40
+#define	MEMC_SPARE		0x44
+#define	MEMC_TPADDR		0x48
+#define	MEMC_TPDATA		0x4c
+#define	MEMC_BARRIER		0x50
+#define	MEMC_CORE		0x54
+
+
+#else
+
+/* Sonics side: MEMC core registers */
+typedef volatile struct sbmemcregs {
+	uint32	control;
+	uint32	config;
+	uint32	refresh;
+	uint32	biststat;
+	uint32	modebuf;
+	uint32	bkcls;
+	uint32	priorinv;
+	uint32	dramtim;
+	uint32	intstat;
+	uint32	intmask;
+	uint32	intinfo;
+	uint32	reserved1;
+	uint32	ncdlctl;
+	uint32	rdncdlcor;
+	uint32	wrncdlcor;
+	uint32	miscdlyctl;
+	uint32	dqsgatencdl;
+	uint32	spare;
+	uint32	tpaddr;
+	uint32	tpdata;
+	uint32	barrier;
+	uint32	core;
+} sbmemcregs_t;
+
+#endif
+
+/* MEMC Core Init values (OCP ID 0x80f) */
+
+/* For sdr: */
+#define MEMC_SD_CONFIG_INIT	0x00048000
+#define MEMC_SD_DRAMTIM2_INIT	0x000754d8
+#define MEMC_SD_DRAMTIM3_INIT	0x000754da
+#define MEMC_SD_RDNCDLCOR_INIT	0x00000000
+#define MEMC_SD_WRNCDLCOR_INIT	0x49351200
+#define MEMC_SD1_WRNCDLCOR_INIT	0x14500200	/* For corerev 1 (4712) */
+#define MEMC_SD_MISCDLYCTL_INIT	0x00061c1b
+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416	/* For corerev 1 (4712) */
+#define MEMC_SD_CONTROL_INIT0	0x00000002
+#define MEMC_SD_CONTROL_INIT1	0x00000008
+#define MEMC_SD_CONTROL_INIT2	0x00000004
+#define MEMC_SD_CONTROL_INIT3	0x00000010
+#define MEMC_SD_CONTROL_INIT4	0x00000001
+#define MEMC_SD_MODEBUF_INIT	0x00000000
+#define MEMC_SD_REFRESH_INIT	0x0000840f
+
+
+/* This is for SDRM8X8X4 */
+#define	MEMC_SDR_INIT		0x0008
+#define	MEMC_SDR_MODE		0x32
+#define	MEMC_SDR_NCDL		0x00020032
+#define	MEMC_SDR1_NCDL		0x0002020f	/* For corerev 1 (4712) */
+
+/* For ddr: */
+#define MEMC_CONFIG_INIT	0x00048000
+#define MEMC_DRAMTIM2_INIT	0x000754d8
+#define MEMC_DRAMTIM25_INIT	0x000754d9
+#define MEMC_RDNCDLCOR_INIT	0x00000000
+#define MEMC_RDNCDLCOR_SIMINIT	0xf6f6f6f6	/* For hdl sim */
+#define MEMC_WRNCDLCOR_INIT	0x49351200
+#define MEMC_1_WRNCDLCOR_INIT	0x14500200
+#define MEMC_DQSGATENCDL_INIT	0x00030000
+#define MEMC_MISCDLYCTL_INIT	0x21061c1b
+#define MEMC_1_MISCDLYCTL_INIT	0x21021400
+#define MEMC_NCDLCTL_INIT	0x00002001
+#define MEMC_CONTROL_INIT0	0x00000002
+#define MEMC_CONTROL_INIT1	0x00000008
+#define MEMC_MODEBUF_INIT0	0x00004000
+#define MEMC_CONTROL_INIT2	0x00000010
+#define MEMC_MODEBUF_INIT1	0x00000100
+#define MEMC_CONTROL_INIT3	0x00000010
+#define MEMC_CONTROL_INIT4	0x00000008
+#define MEMC_REFRESH_INIT	0x0000840f
+#define MEMC_CONTROL_INIT5	0x00000004
+#define MEMC_MODEBUF_INIT2	0x00000000
+#define MEMC_CONTROL_INIT6	0x00000010
+#define MEMC_CONTROL_INIT7	0x00000001
+
+
+/* This is for DDRM16X16X2 */
+#define	MEMC_DDR_INIT		0x0009
+#define	MEMC_DDR_MODE		0x62
+#define	MEMC_DDR_NCDL		0x0005050a
+#define	MEMC_DDR1_NCDL		0x00000a0a	/* For corerev 1 (4712) */
+
+/* mask for sdr/ddr calibration registers */
+#define MEMC_RDNCDLCOR_RD_MASK	0x000000ff
+#define MEMC_WRNCDLCOR_WR_MASK	0x000000ff
+#define MEMC_DQSGATENCDL_G_MASK	0x000000ff
+
+/* masks for miscdlyctl registers */
+#define MEMC_MISC_SM_MASK	0x30000000
+#define MEMC_MISC_SM_SHIFT	28
+#define MEMC_MISC_SD_MASK	0x0f000000
+#define MEMC_MISC_SD_SHIFT	24
+
+/* hw threshhold for calculating wr/rd for sdr memc */
+#define MEMC_CD_THRESHOLD	128
+
+/* Low bit of init register says if memc is ddr or sdr */
+#define MEMC_CONFIG_DDR		0x00000001
+
+#endif	/* _SBMEMC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h
--- linux.old/arch/mips/bcm947xx/include/sbmips.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbmips.h	2005-11-07 22:51:38.784726500 +0100
@@ -0,0 +1,62 @@
+/*
+ * Broadcom SiliconBackplane MIPS definitions
+ *
+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
+ * interface. The core revision is stored in the SB ID register in SB
+ * configuration space.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef	_SBMIPS_H
+#define	_SBMIPS_H
+
+#include <mipsinc.h>
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif	/* PAD */
+
+typedef volatile struct {
+	uint32	corecontrol;
+	uint32	PAD[2];
+	uint32	biststatus;
+	uint32	PAD[4];
+	uint32	intstatus;
+	uint32	intmask;
+	uint32	timer;
+} mipsregs_t;
+
+extern uint32 sb_flag(sb_t *sbh);
+extern uint sb_irq(sb_t *sbh);
+
+extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
+
+extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap);
+extern void sb_jtagm_disable(void *h);
+extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr);
+extern void BCMINIT(sb_mips_init)(sb_t *sbh);
+extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh);
+extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
+extern void BCMINIT(enable_pfc)(uint32 mode);
+extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh);
+
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#endif	/* _SBMIPS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
--- linux.old/arch/mips/bcm947xx/include/sbpci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbpci.h	2005-11-07 22:51:38.788726750 +0100
@@ -0,0 +1,122 @@
+/*
+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
+ *
+ * $Id$
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ */
+
+#ifndef	_SBPCI_H
+#define	_SBPCI_H
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/* Sonics side: PCI core and host control registers */
+typedef struct sbpciregs {
+	uint32 control;		/* PCI control */
+	uint32 PAD[3];
+	uint32 arbcontrol;	/* PCI arbiter control */
+	uint32 PAD[3];
+	uint32 intstatus;	/* Interrupt status */
+	uint32 intmask;		/* Interrupt mask */
+	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
+	uint32 PAD[9];
+	uint32 bcastaddr;	/* Sonics broadcast address */
+	uint32 bcastdata;	/* Sonics broadcast data */
+	uint32 PAD[2];
+	uint32 gpioin;		/* ro: gpio input (>=rev2) */
+	uint32 gpioout;		/* rw: gpio output (>=rev2) */
+	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
+	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
+	uint32 PAD[36];
+	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
+	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
+	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
+	uint32 PAD[445];
+	uint16 sprom[36];	/* SPROM shadow Area */
+	uint32 PAD[46];
+} sbpciregs_t;
+
+/* PCI control */
+#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
+#define PCI_RST		0x02	/* Value driven out to pin */
+#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
+#define PCI_CLK		0x08	/* Gate for clock driven out to pin */	
+
+/* PCI arbiter control */
+#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
+#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
+#define PCI_PARKID_MASK	0x06	/* Selects which agent is parked on an idle bus */
+#define PCI_PARKID_SHIFT   1
+#define PCI_PARKID_LAST	   0	/* Last requestor */
+#define PCI_PARKID_4710	   1	/* 4710 */
+#define PCI_PARKID_EXTREQ0 2	/* External requestor 0 */
+#define PCI_PARKID_EXTREQ1 3	/* External requestor 1 */
+
+/* Interrupt status/mask */
+#define PCI_INTA	0x01	/* PCI INTA# is asserted */
+#define PCI_INTB	0x02	/* PCI INTB# is asserted */
+#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
+#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
+#define PCI_PME		0x10	/* PCI PME# is asserted */
+
+/* (General) PCI/SB mailbox interrupts, two bits per pci function */
+#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
+#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
+#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
+#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
+#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
+#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
+#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
+#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
+
+/* Sonics broadcast address */
+#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
+
+/* Sonics to PCI translation types */
+#define SBTOPCI0_MASK	0xfc000000
+#define SBTOPCI1_MASK	0xfc000000
+#define SBTOPCI2_MASK	0xc0000000
+#define SBTOPCI_MEM	0
+#define SBTOPCI_IO	1
+#define SBTOPCI_CFG0	2
+#define SBTOPCI_CFG1	3
+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
+#define	SBTOPCI_BURST	0x8		/* burst enable */
+#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
+#define	SBTOPCI_RC_READ		0x00	/* memory read */
+#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
+
+/* PCI core index in SROM shadow area */
+#define SRSH_PI_OFFSET	0	/* first word */
+#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
+#define SRSH_PI_SHIFT	12	/* bit 15:12 */
+
+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
+#define cap_list	rsvd_a[0]
+#define bar0_window	dev_dep[0x80 - 0x40]
+#define bar1_window	dev_dep[0x84 - 0x40]
+#define sprom_control	dev_dep[0x88 - 0x40]
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
+extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
+extern void sbpci_ban(uint16 core);
+extern int sbpci_init(sb_t *sbh);
+extern void sbpci_check(sb_t *sbh);
+
+#endif /* !_LANGUAGE_ASSEMBLY */
+
+#endif	/* _SBPCI_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h
--- linux.old/arch/mips/bcm947xx/include/sbpcie.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h	2005-11-07 23:39:41.403557000 +0100
@@ -0,0 +1,199 @@
+/*
+ * BCM43XX SiliconBackplane PCIE core hardware definitions.
+ *
+ * $Id: 
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ */
+
+#ifndef	_SBPCIE_H
+#define	_SBPCIE_H
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/* PCIE Enumeration space offsets*/
+#define  PCIE_CORE_CONFIG_OFFSET	0x0
+#define  PCIE_FUNC0_CONFIG_OFFSET	0x400
+#define  PCIE_FUNC1_CONFIG_OFFSET	0x500
+#define  PCIE_FUNC2_CONFIG_OFFSET	0x600
+#define  PCIE_FUNC3_CONFIG_OFFSET	0x700
+#define  PCIE_SPROM_SHADOW_OFFSET	0x800
+#define  PCIE_SBCONFIG_OFFSET		0xE00	
+
+/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
+#define PCIE_BAR0_WINMAPCORE_OFFSET	0x0
+#define PCIE_BAR0_EXTSPROM_OFFSET	0x1000
+#define PCIE_BAR0_PCIECORE_OFFSET	0x2000
+#define PCIE_BAR0_CCCOREREG_OFFSET	0x3000
+
+/* SB side: PCIE core and host control registers */
+typedef struct sbpcieregs {
+
+	uint32 PAD[3];
+	uint32 biststatus;	 /* bist Status: 0x00C*/
+	uint32 PAD[6];			
+	uint32 sbtopcimailbox;	 /* sb to pcie mailbox: 0x028*/	
+	uint32 PAD[54];
+	uint32 sbtopcie0;	/* sb to pcie translation 0: 0x100 */
+	uint32 sbtopcie1;	/* sb to pcie translation 1: 0x104 */
+	uint32 sbtopcie2;	/* sb to pcie translation 2: 0x108 */
+	uint32 PAD[4];
+
+	/* pcie core supports in direct access to config space */
+	uint32 configaddr;	/* pcie config space access: Address field: 0x120*/
+	uint32 configdata;	/* pcie config space access: Data field: 0x124*/
+
+	/* mdio access to serdes */
+	uint32 mdiocontrol;	/* controls the mdio access: 0x128 */
+	uint32 mdiodata;	/* Data to the mdio access: 0x12c */
+
+	/* pcie protocol phy/dllp/tlp register access mechanism*/
+	uint32 pcieaddr;	/* address of the internal registeru: 0x130 */
+	uint32 pciedata;	/* Data to/from the internal regsiter: 0x134 */
+
+	uint32 PAD[434];
+	uint16 sprom[36];	/* SPROM shadow Area */
+} sbpcieregs_t;
+
+/* SB to PCIE translation masks */
+#define SBTOPCIE0_MASK	0xfc000000
+#define SBTOPCIE1_MASK	0xfc000000
+#define SBTOPCIE2_MASK	0xc0000000
+
+/* Access type bits (0:1)*/
+#define SBTOPCIE_MEM	0
+#define SBTOPCIE_IO	1
+#define SBTOPCIE_CFG0	2
+#define SBTOPCIE_CFG1	3
+
+/*Prefetch enable bit 2*/
+#define SBTOPCIE_PF		4
+
+/*Write Burst enable for memory write bit 3*/
+#define SBTOPCIE_WR_BURST	8	
+
+/* config access */
+#define CONFIGADDR_FUNC_MASK	0x7000	
+#define CONFIGADDR_FUNC_SHF	12
+#define CONFIGADDR_REG_MASK	0x0FFF
+#define CONFIGADDR_REG_SHF	0
+
+/* PCIE protocol regs Indirect Address */
+#define PCIEADDR_PROT_MASK	0x300
+#define PCIEADDR_PROT_SHF	8
+#define PCIEADDR_PL_TLP		0
+#define PCIEADDR_PL_DLLP	1
+#define PCIEADDR_PL_PLP		2
+
+/* PCIE protocol PHY diagnostic registers */
+#define	PCIE_PLP_MODEREG		0x200 /* Mode*/
+#define	PCIE_PLP_STATUSREG		0x204 /* Status*/ 
+#define PCIE_PLP_LTSSMCTRLREG		0x208 /* LTSSM control  */
+#define PCIE_PLP_LTLINKNUMREG		0x20c /* Link Training Link number*/
+#define PCIE_PLP_LTLANENUMREG		0x210 /* Link Training Lane number*/
+#define PCIE_PLP_LTNFTSREG		0x214 /* Link Training N_FTS */
+#define PCIE_PLP_ATTNREG		0x218 /* Attention */
+#define PCIE_PLP_ATTNMASKREG		0x21C /* Attention Mask */ 
+#define PCIE_PLP_RXERRCTR		0x220 /* Rx Error */
+#define PCIE_PLP_RXFRMERRCTR		0x224 /* Rx Framing Error*/
+#define PCIE_PLP_RXERRTHRESHREG		0x228 /* Rx Error threshold */
+#define PCIE_PLP_TESTCTRLREG		0x22C /* Test Control reg*/
+#define PCIE_PLP_SERDESCTRLOVRDREG	0x230 /* SERDES Control Override */
+#define PCIE_PLP_TIMINGOVRDREG		0x234 /* Timing param override */
+#define PCIE_PLP_RXTXSMDIAGREG		0x238 /* RXTX State Machine Diag*/
+#define PCIE_PLP_LTSSMDIAGREG		0x23C /* LTSSM State Machine Diag*/
+
+/* PCIE protocol DLLP diagnostic registers */
+#define PCIE_DLLP_LCREG			0x100 /* Link Control*/
+#define PCIE_DLLP_LSREG			0x104 /* Link Status */
+#define PCIE_DLLP_LAREG			0x108 /* Link Attention*/
+#define PCIE_DLLP_LAMASKREG		0x10C /* Link Attention Mask */
+#define PCIE_DLLP_NEXTTXSEQNUMREG	0x110 /* Next Tx Seq Num*/
+#define PCIE_DLLP_ACKEDTXSEQNUMREG	0x114 /* Acked Tx Seq Num*/
+#define PCIE_DLLP_PURGEDTXSEQNUMREG	0x118 /* Purged Tx Seq Num*/	
+#define PCIE_DLLP_RXSEQNUMREG		0x11C /* Rx Sequence Number */
+#define PCIE_DLLP_LRREG			0x120 /* Link Replay*/
+#define PCIE_DLLP_LACKTOREG		0x124 /* Link Ack Timeout*/
+#define PCIE_DLLP_PMTHRESHREG		0x128 /* Power Management Threshold*/
+#define PCIE_DLLP_RTRYWPREG		0x12C /* Retry buffer write ptr*/
+#define PCIE_DLLP_RTRYRPREG		0x130 /* Retry buffer Read ptr*/
+#define PCIE_DLLP_RTRYPPREG		0x134 /* Retry buffer Purged ptr*/
+#define PCIE_DLLP_RTRRWREG		0x138 /* Retry buffer Read/Write*/
+#define PCIE_DLLP_ECTHRESHREG		0x13C /* Error Count Threshold */
+#define PCIE_DLLP_TLPERRCTRREG		0x140 /* TLP Error Counter */
+#define PCIE_DLLP_ERRCTRREG		0x144 /* Error Counter*/
+#define PCIE_DLLP_NAKRXCTRREG		0x148 /* NAK Received Counter*/	
+#define PCIE_DLLP_TESTREG		0x14C /* Test */
+#define PCIE_DLLP_PKTBIST		0x150 /* Packet BIST*/
+
+/* PCIE protocol TLP diagnostic registers */
+#define PCIE_TLP_CONFIGREG		0x000 /* Configuration */
+#define PCIE_TLP_WORKAROUNDSREG		0x004 /* TLP Workarounds */
+#define PCIE_TLP_WRDMAUPPER		0x010 /* Write DMA Upper Address*/
+#define PCIE_TLP_WRDMALOWER		0x014 /* Write DMA Lower Address*/
+#define PCIE_TLP_WRDMAREQ_LBEREG	0x018 /* Write DMA Len/ByteEn Req*/
+#define PCIE_TLP_RDDMAUPPER		0x01C /* Read DMA Upper Address*/
+#define PCIE_TLP_RDDMALOWER		0x020 /* Read DMA Lower Address*/
+#define PCIE_TLP_RDDMALENREG		0x024 /* Read DMA Len Req*/
+#define PCIE_TLP_MSIDMAUPPER		0x028 /* MSI DMA Upper Address*/
+#define PCIE_TLP_MSIDMALOWER		0x02C /* MSI DMA Lower Address*/
+#define PCIE_TLP_MSIDMALENREG		0x030 /* MSI DMA Len Req*/
+#define PCIE_TLP_SLVREQLENREG		0x034 /* Slave Request Len*/
+#define PCIE_TLP_FCINPUTSREQ		0x038 /* Flow Control Inputs*/
+#define PCIE_TLP_TXSMGRSREQ		0x03C /* Tx StateMachine and Gated Req*/
+#define PCIE_TLP_ADRACKCNTARBLEN	0x040 /* Address Ack XferCnt and ARB Len*/
+#define PCIE_TLP_DMACPLHDR0		0x044 /* DMA Completion Hdr 0*/
+#define PCIE_TLP_DMACPLHDR1		0x048 /* DMA Completion Hdr 1*/
+#define PCIE_TLP_DMACPLHDR2		0x04C /* DMA Completion Hdr 2*/
+#define PCIE_TLP_DMACPLMISC0		0x050 /* DMA Completion Misc0 */
+#define PCIE_TLP_DMACPLMISC1		0x054 /* DMA Completion Misc1 */
+#define PCIE_TLP_DMACPLMISC2		0x058 /* DMA Completion Misc2 */
+#define PCIE_TLP_SPTCTRLLEN		0x05C /* Split Controller Req len*/
+#define PCIE_TLP_SPTCTRLMSIC0		0x060 /* Split Controller Misc 0*/
+#define PCIE_TLP_SPTCTRLMSIC1		0x064 /* Split Controller Misc 1*/
+#define PCIE_TLP_BUSDEVFUNC		0x068 /* Bus/Device/Func*/
+#define PCIE_TLP_RESETCTR		0x06C /* Reset Counter*/
+#define PCIE_TLP_RTRYBUF		0x070 /* Retry Buffer value*/
+#define PCIE_TLP_TGTDEBUG1		0x074 /* Target Debug Reg1*/
+#define PCIE_TLP_TGTDEBUG2		0x078 /* Target Debug Reg2*/
+#define PCIE_TLP_TGTDEBUG3		0x07C /* Target Debug Reg3*/
+#define PCIE_TLP_TGTDEBUG4		0x080 /* Target Debug Reg4*/
+
+/* MDIO control */
+#define MDIOCTL_DIVISOR_MASK		0x7f	/* clock to be used on MDIO */
+#define MDIOCTL_DIVISOR_VAL		0x2
+#define MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
+#define MDIOCTL_ACCESS_DONE		0x100   /* Tranaction complete */
+
+/* MDIO Data */
+#define MDIODATA_MASK			0x0000ffff	/* data 2 bytes */
+#define MDIODATA_TA			0x00020000	/* Turnaround */
+#define MDIODATA_REGADDR_SHF		18		/* Regaddr shift */
+#define MDIODATA_REGADDR_MASK		0x003c0000	/* Regaddr Mask */
+#define MDIODATA_DEVADDR_SHF		22		/* Physmedia devaddr shift */
+#define MDIODATA_DEVADDR_MASK		0x0fc00000	/* Physmedia devaddr Mask */
+#define MDIODATA_WRITE			0x10000000	/* write Transaction */
+#define MDIODATA_READ			0x20000000	/* Read Transaction */
+#define MDIODATA_START			0x40000000	/* start of Transaction */
+
+/* MDIO devices (SERDES modules) */
+#define MDIODATA_DEV_PLL       		0x1d	/* SERDES PLL Dev */
+#define MDIODATA_DEV_TX        		0x1e	/* SERDES TX Dev */
+#define MDIODATA_DEV_RX        		0x1f	/* SERDES RX Dev */
+
+/* SERDES registers */
+#define SERDES_RX_TIMER1		2	/* Rx Timer1 */
+#define SERDES_RX_CDR			6	/* CDR */
+#define SERDES_RX_CDRBW			7	/* CDR BW */
+
+#endif	/* _SBPCIE_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h
--- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h	2005-11-07 22:51:38.788726750 +0100
@@ -0,0 +1,146 @@
+/*
+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
+ *
+ * $Id$
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ */
+
+#ifndef	_SBPCMCIA_H
+#define	_SBPCMCIA_H
+
+
+/* All the addresses that are offsets in attribute space are divided
+ * by two to account for the fact that odd bytes are invalid in
+ * attribute space and our read/write routines make the space appear
+ * as if they didn't exist. Still we want to show the original numbers
+ * as documented in the hnd_pcmcia core manual.
+ */
+
+/* PCMCIA Function Configuration Registers */
+#define	PCMCIA_FCR		(0x700 / 2)
+
+#define	FCR0_OFF		0
+#define	FCR1_OFF		(0x40 / 2)
+#define	FCR2_OFF		(0x80 / 2)
+#define	FCR3_OFF		(0xc0 / 2)
+
+#define	PCMCIA_FCR0		(0x700 / 2)
+#define	PCMCIA_FCR1		(0x740 / 2)
+#define	PCMCIA_FCR2		(0x780 / 2)
+#define	PCMCIA_FCR3		(0x7c0 / 2)
+
+/* Standard PCMCIA FCR registers */
+
+#define	PCMCIA_COR		0
+
+#define	COR_RST			0x80
+#define	COR_LEV			0x40
+#define	COR_IRQEN		0x04
+#define	COR_BLREN		0x01
+#define	COR_FUNEN		0x01
+
+
+#define	PCICIA_FCSR		(2 / 2)
+#define	PCICIA_PRR		(4 / 2)
+#define	PCICIA_SCR		(6 / 2)
+#define	PCICIA_ESR		(8 / 2)
+
+
+#define PCM_MEMOFF		0x0000
+#define F0_MEMOFF		0x1000
+#define F1_MEMOFF		0x2000
+#define F2_MEMOFF		0x3000
+#define F3_MEMOFF		0x4000
+
+/* Memory base in the function fcr's */
+#define MEM_ADDR0		(0x728 / 2)
+#define MEM_ADDR1		(0x72a / 2)
+#define MEM_ADDR2		(0x72c / 2)
+
+/* PCMCIA base plus Srom access in fcr0: */
+#define PCMCIA_ADDR0		(0x072e / 2)
+#define PCMCIA_ADDR1		(0x0730 / 2)
+#define PCMCIA_ADDR2		(0x0732 / 2)
+
+#define MEM_SEG			(0x0734 / 2)
+#define SROM_CS			(0x0736 / 2)
+#define SROM_DATAL		(0x0738 / 2)
+#define SROM_DATAH		(0x073a / 2)
+#define SROM_ADDRL		(0x073c / 2)
+#define SROM_ADDRH		(0x073e / 2)
+
+/*  Values for srom_cs: */
+#define SROM_IDLE		0
+#define SROM_WRITE		1
+#define SROM_READ		2
+#define SROM_WEN		4
+#define SROM_WDS		7
+#define SROM_DONE		8
+
+/* CIS stuff */
+
+/* The CIS stops where the FCRs start */
+#define	CIS_SIZE		PCMCIA_FCR
+
+/* Standard tuples we know about */
+
+#define	CISTPL_MANFID		0x20		/* Manufacturer and device id */
+#define	CISTPL_FUNCE		0x22		/* Function extensions */
+#define	CISTPL_CFTABLE		0x1b		/* Config table entry */
+
+/* Function extensions for LANs */
+
+#define	LAN_TECH		1		/* Technology type */
+#define	LAN_SPEED		2		/* Raw bit rate */
+#define	LAN_MEDIA		3		/* Transmission media */
+#define	LAN_NID			4		/* Node identification (aka MAC addr) */
+#define	LAN_CONN		5		/* Connector standard */
+
+
+/* CFTable */
+#define CFTABLE_REGWIN_2K	0x08		/* 2k reg windows size */
+#define CFTABLE_REGWIN_4K	0x10		/* 4k reg windows size */
+#define CFTABLE_REGWIN_8K	0x20		/* 8k reg windows size */
+
+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
+ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
+ */
+
+#define	CISTPL_BRCM_HNBU	0x80
+
+/* Subtypes of BRCM_HNBU: */
+
+#define HNBU_SROMREV		0x00		/* A byte with sromrev, 1 if not present */
+#define HNBU_CHIPID		0x01		/* Six bytes with PCI vendor &
+						 * device id and chiprev
+						 */
+#define HNBU_BOARDREV		0x02		/* Two bytes board revision */
+#define HNBU_PAPARMS		0x03		/* PA parameters: 1 (old), 8 (sreomrev == 1)
+						 * or 9 (sromrev > 1) bytes */
+#define HNBU_OEM		0x04		/* Eight bytes OEM data (sromrev == 1) */
+#define HNBU_CC			0x05		/* Default country code (sromrev == 1) */
+#define	HNBU_AA			0x06		/* Antennas available */
+#define	HNBU_AG			0x07		/* Antenna gain */
+#define HNBU_BOARDFLAGS		0x08		/* board flags (2 or 4 bytes) */
+#define HNBU_LEDS		0x09		/* LED set */
+#define HNBU_CCODE		0x0a		/* Country code (2 bytes ascii + 1 byte cctl)
+						 * in rev 2
+						 */
+#define HNBU_CCKPO		0x0b		/* 2 byte cck power offsets in rev 3 */
+#define HNBU_OFDMPO		0x0c		/* 4 byte 11g ofdm power offsets in rev 3 */
+
+
+/* sbtmstatelow */
+#define SBTML_INT_ACK		0x40000		/* ack the sb interrupt */
+#define SBTML_INT_EN		0x20000		/* enable sb interrupt */
+
+/* sbtmstatehigh */
+#define SBTMH_INT_STATUS	0x40000		/* sb interrupt status */
+
+#endif	/* _SBPCMCIA_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
--- linux.old/arch/mips/bcm947xx/include/sbsdram.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h	2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,75 @@
+/*
+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef	_SBSDRAM_H
+#define	_SBSDRAM_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* Sonics side: SDRAM core registers */
+typedef volatile struct sbsdramregs {
+	uint32	initcontrol;	/* Generates external SDRAM initialization sequence */
+	uint32	config;		/* Initializes external SDRAM mode register */
+	uint32	refresh;	/* Controls external SDRAM refresh rate */
+	uint32	pad1;
+	uint32	pad2;
+} sbsdramregs_t;
+
+#endif
+
+/* SDRAM initialization control (initcontrol) register bits */
+#define SDRAM_CBR	0x0001	/* Writing 1 generates refresh cycle and toggles bit */
+#define SDRAM_PRE	0x0002	/* Writing 1 generates precharge cycle and toggles bit */
+#define SDRAM_MRS	0x0004	/* Writing 1 generates mode register select cycle and toggles bit */
+#define SDRAM_EN	0x0008	/* When set, enables access to SDRAM */
+#define SDRAM_16Mb	0x0000	/* Use 16 Megabit SDRAM */
+#define SDRAM_64Mb	0x0010	/* Use 64 Megabit SDRAM */
+#define SDRAM_128Mb	0x0020	/* Use 128 Megabit SDRAM */
+#define SDRAM_RSVMb	0x0030	/* Use special SDRAM */
+#define SDRAM_RST	0x0080	/* Writing 1 causes soft reset of controller */
+#define SDRAM_SELFREF	0x0100	/* Writing 1 enables self refresh mode */
+#define SDRAM_PWRDOWN	0x0200	/* Writing 1 causes controller to power down */
+#define SDRAM_32BIT	0x0400	/* When set, indicates 32 bit SDRAM interface */
+#define SDRAM_9BITCOL	0x0800	/* When set, indicates 9 bit column */
+
+/* SDRAM configuration (config) register bits */
+#define SDRAM_BURSTFULL	0x0000	/* Use full page bursts */
+#define SDRAM_BURST8	0x0001	/* Use burst of 8 */
+#define SDRAM_BURST4	0x0002	/* Use burst of 4 */
+#define SDRAM_BURST2	0x0003	/* Use burst of 2 */
+#define SDRAM_CAS3	0x0000	/* Use CAS latency of 3 */
+#define SDRAM_CAS2	0x0004	/* Use CAS latency of 2 */
+
+/* SDRAM refresh control (refresh) register bits */
+#define SDRAM_REF(p)	(((p)&0xff) | SDRAM_REF_EN)	/* Refresh period */
+#define SDRAM_REF_EN	0x8000		/* Writing 1 enables periodic refresh */
+
+/* SDRAM Core default Init values (OCP ID 0x803) */
+#define SDRAM_INIT	MEM4MX16X2
+#define SDRAM_CONFIG    SDRAM_BURSTFULL
+#define SDRAM_REFRESH   SDRAM_REF(0x40)
+
+#define MEM1MX16	0x009	/* 2 MB */
+#define MEM1MX16X2	0x409	/* 4 MB */
+#define MEM2MX8X2	0x809	/* 4 MB */
+#define MEM2MX8X4	0xc09	/* 8 MB */
+#define MEM2MX32	0x439	/* 8 MB */
+#define MEM4MX16	0x019	/* 8 MB */
+#define MEM4MX16X2	0x419	/* 16 MB */
+#define MEM8MX8X2	0x819	/* 16 MB */
+#define MEM8MX16	0x829	/* 16 MB */
+#define MEM4MX32	0x429	/* 16 MB */
+#define MEM8MX8X4	0xc19	/* 32 MB */
+#define MEM8MX16X2	0xc29	/* 32 MB */
+
+#endif	/* _SBSDRAM_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h
--- linux.old/arch/mips/bcm947xx/include/sbsocram.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h	2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,37 @@
+/*
+ * BCM47XX Sonics SiliconBackplane embedded ram core
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#ifndef	_SBSOCRAM_H
+#define	_SBSOCRAM_H
+
+#define	SOCRAM_MEMSIZE		0x00
+#define	SOCRAM_BISTSTAT		0x0c
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* Memcsocram core registers */
+typedef volatile struct sbsocramregs {
+	uint32	memsize;
+	uint32	biststat;
+} sbsocramregs_t;
+
+#endif
+
+/* Them memory size is 2 to the power of the following
+ * base added to the contents of the memsize register.
+ */
+#define SOCRAM_MEMSIZE_BASESHIFT 16
+
+#endif	/* _SBSOCRAM_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
--- linux.old/arch/mips/bcm947xx/include/sbutils.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sbutils.h	2005-11-07 22:51:38.788726750 +0100
@@ -0,0 +1,140 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of Broadcom HNBU SiliconBackplane-based chips.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef	_sbutils_h_
+#define	_sbutils_h_
+
+/* 
+ * Datastructure to export all chip specific common variables 
+ * public (read-only) portion of sbutils handle returned by 
+ * sb_attach()/sb_kattach()
+*/
+
+struct sb_pub {
+
+	uint	bustype;		/* SB_BUS, PCI_BUS  */
+	uint	buscoretype;		/* SB_PCI, SB_PCMCIA, SB_PCIE*/
+	uint	buscorerev;		/* buscore rev */
+	uint	buscoreidx;		/* buscore index */
+	int	ccrev;			/* chip common core rev */
+	uint	boardtype;		/* board type */
+	uint	boardvendor;		/* board vendor */
+	uint	chip;			/* chip number */
+	uint	chiprev;		/* chip revision */
+	uint	chippkg;		/* chip package option */
+	uint    sonicsrev;		/* sonics backplane rev */
+};
+
+typedef const struct sb_pub  sb_t;
+
+/*
+ * Many of the routines below take an 'sbh' handle as their first arg.
+ * Allocate this by calling sb_attach().  Free it by calling sb_detach().
+ * At any one time, the sbh is logically focused on one particular sb core
+ * (the "current core").
+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
+ */
+
+/* exported externs */
+extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
+extern sb_t * BCMINIT(sb_kattach)(void);
+extern void sb_detach(sb_t *sbh);
+extern uint BCMINIT(sb_chip)(sb_t *sbh);
+extern uint BCMINIT(sb_chiprev)(sb_t *sbh);
+extern uint BCMINIT(sb_chipcrev)(sb_t *sbh);
+extern uint BCMINIT(sb_chippkg)(sb_t *sbh);
+extern uint BCMINIT(sb_pcirev)(sb_t *sbh);
+extern bool BCMINIT(sb_war16165)(sb_t *sbh);
+extern uint BCMINIT(sb_pcmciarev)(sb_t *sbh);
+extern uint BCMINIT(sb_boardvendor)(sb_t *sbh);
+extern uint BCMINIT(sb_boardtype)(sb_t *sbh);
+extern uint sb_bus(sb_t *sbh);
+extern uint sb_buscoretype(sb_t *sbh);
+extern uint sb_buscorerev(sb_t *sbh);
+extern uint sb_corelist(sb_t *sbh, uint coreid[]);
+extern uint sb_coreid(sb_t *sbh);
+extern uint sb_coreidx(sb_t *sbh);
+extern uint sb_coreunit(sb_t *sbh);
+extern uint sb_corevendor(sb_t *sbh);
+extern uint sb_corerev(sb_t *sbh);
+extern void *sb_osh(sb_t *sbh);
+extern void *sb_coreregs(sb_t *sbh);
+extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
+extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
+extern bool sb_iscoreup(sb_t *sbh);
+extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
+extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
+extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit);
+extern void sb_commit(sb_t *sbh);
+extern uint32 sb_base(uint32 admatch);
+extern uint32 sb_size(uint32 admatch);
+extern void sb_core_reset(sb_t *sbh, uint32 bits);
+extern void sb_core_tofixup(sb_t *sbh);
+extern void sb_core_disable(sb_t *sbh, uint32 bits);
+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
+extern uint32 sb_clock(sb_t *sbh);
+extern void sb_pci_setup(sb_t *sbh, uint coremask);
+extern void sb_pcmcia_init(sb_t *sbh);
+extern void sb_watchdog(sb_t *sbh, uint ticks);
+extern void *sb_gpiosetcore(sb_t *sbh);
+extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
+extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
+extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
+extern uint32 sb_gpioin(sb_t *sbh);
+extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
+extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
+extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
+extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
+extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
+
+extern void sb_clkctl_init(sb_t *sbh);
+extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
+extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
+extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
+extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn,
+	void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg);
+extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to);
+extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, 
+	uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif);
+extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset);
+extern uint sb_pcie_writereg(sb_t *sbh, void *arg1,  uint offset, uint val);
+extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
+
+
+
+/*
+* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
+* The returned path is NULL terminated and has trailing '/'.
+* Return 0 on success, nonzero otherwise.
+*/
+extern int sb_devpath(sb_t *sbh, char *path, int size);
+
+/* clkctl xtal what flags */
+#define	XTAL		0x1			/* primary crystal oscillator (2050) */
+#define	PLL		0x2			/* main chip pll */
+
+/* clkctl clk mode */
+#define	CLK_FAST	0			/* force fast (pll) clock */
+#define	CLK_DYNAMIC	2			/* enable dynamic clock control */
+
+
+/* GPIO usage priorities */
+#define GPIO_DRV_PRIORITY	0
+#define GPIO_APP_PRIORITY	1
+
+/* device path */
+#define SB_DEVPATH_BUFSZ	16	/* min buffer size in bytes */
+
+#endif	/* _sbutils_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
--- linux.old/arch/mips/bcm947xx/include/sflash.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/sflash.h	2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,36 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#ifndef _sflash_h_
+#define _sflash_h_
+
+#include <typedefs.h>
+#include <sbchipc.h>
+
+struct sflash {
+	uint blocksize;		/* Block size */
+	uint numblocks;		/* Number of blocks */
+	uint32 type;		/* Type */
+	uint size;		/* Total size in bytes */
+};
+
+/* Utility functions */
+extern int sflash_poll(chipcregs_t *cc, uint offset);
+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
+extern int sflash_erase(chipcregs_t *cc, uint offset);
+extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
+extern struct sflash * sflash_init(chipcregs_t *cc);
+
+#endif /* _sflash_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
--- linux.old/arch/mips/bcm947xx/include/trxhdr.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h	2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,33 @@
+/*
+ * TRX image file header format.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */ 
+
+#include <typedefs.h>
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
+
+struct trx_header {
+	uint32 magic;		/* "HDR0" */
+	uint32 len;		/* Length of file including header */
+	uint32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	uint32 flag_version;	/* 0:15 flags, 16:31 version */
+	uint32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
+};
+
+/* Compatibility */
+typedef struct trx_header TRXHDR, *PTRXHDR;
diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
--- linux.old/arch/mips/bcm947xx/include/typedefs.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/typedefs.h	2005-11-07 22:51:38.788726750 +0100
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+
+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
+ * typedef file "site_typedefs.h".
+ *
+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
+ * section of this file makes inferences about the compile environment
+ * based on defined symbols and possibly compiler pragmas.
+ *
+ * Following these two sections is the "Default Typedefs"
+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
+ * defined. This section has a default set of typedefs and a few
+ * proprocessor symbols (TRUE, FALSE, NULL, ...).
+ */
+
+#ifdef SITE_TYPEDEFS
+
+/*******************************************************************************
+ * Site Specific Typedefs
+ *******************************************************************************/
+
+#include "site_typedefs.h"
+
+#else
+
+/*******************************************************************************
+ * Inferred Typedefs
+ *******************************************************************************/
+
+/* Infer the compile environment based on preprocessor symbols and pramas.
+ * Override type definitions as needed, and include configuration dependent
+ * header files to define types.
+ */
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE	false
+#endif
+#ifndef TRUE
+#define TRUE	true
+#endif
+
+#else	/* ! __cplusplus */
+
+#if defined(_WIN32)
+
+#define TYPEDEF_BOOL
+typedef	unsigned char	bool;			/* consistent w/BOOL */
+
+#endif /* _WIN32 */
+
+#endif	/* ! __cplusplus */
+
+/* use the Windows ULONG_PTR type when compiling for 64 bit */
+#if defined(_WIN64)
+#include <basetsd.h>
+#define TYPEDEF_UINTPTR
+typedef ULONG_PTR	uintptr;
+#endif
+
+#ifdef _HNDRTE_
+typedef long unsigned int size_t;
+#endif
+
+#ifdef _MSC_VER	    /* Microsoft C */
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+typedef signed __int64	int64;
+typedef unsigned __int64 uint64;
+#endif
+
+#if defined(MACOSX) && defined(KERNEL)
+#define TYPEDEF_BOOL
+#endif
+
+
+#if defined(linux)
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+#endif
+
+#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_)
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#endif
+
+
+/* Do not support the (u)int64 types with strict ansi for GNU C */
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
+ * for singned or unsigned */
+#if defined(__ICL)
+
+#define TYPEDEF_INT64
+
+#if defined(__STDC__)
+#define TYPEDEF_UINT64
+#endif
+
+#endif /* __ICL */
+
+
+#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_)
+
+/* pick up ushort & uint from standard types.h */
+#if defined(linux) && defined(__KERNEL__)
+
+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
+
+#else
+
+#include <sys/types.h>	
+
+#endif
+
+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_  && !_MINOSL_ */
+
+#if defined(MACOSX) && defined(KERNEL)
+#include <IOKit/IOTypes.h>
+#endif
+
+
+/* use the default typedefs in the next section of this file */
+#define USE_TYPEDEF_DEFAULTS
+
+#endif /* SITE_TYPEDEFS */
+
+
+/*******************************************************************************
+ * Default Typedefs
+ *******************************************************************************/
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef	/*@abstract@*/ unsigned char	bool;
+#endif
+
+/*----------------------- define uchar, ushort, uint, ulong ------------------*/
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char	uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short	ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int	uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long	ulong;
+#endif
+
+/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char	uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short	uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int	uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_UINTPTR
+typedef unsigned int	uintptr;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char	int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short	int16;
+#endif
+
+#ifndef TYPEDEF_INT32
+typedef signed int	int32;
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+/*----------------------- define float32/64, float_t -----------------------*/
+
+#ifndef TYPEDEF_FLOAT32
+typedef float		float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double		float64;
+#endif
+
+/*
+ * abstracted floating point type allows for compile time selection of
+ * single or double precision arithmetic.  Compiling with -DFLOAT32
+ * selects single precision; the default is double precision.
+ */
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else /* default to double precision floating point */
+typedef float64 float_t;
+#endif
+
+#endif /* TYPEDEF_FLOAT_T */
+
+/*----------------------- define macro values -----------------------------*/
+
+#ifndef FALSE
+#define FALSE	0
+#endif
+
+#ifndef TRUE
+#define TRUE	1
+#endif
+
+#ifndef NULL
+#define	NULL	0
+#endif
+
+#ifndef OFF
+#define	OFF	0
+#endif
+
+#ifndef ON
+#define	ON	1
+#endif
+
+#define	AUTO	(-1)
+
+/* Reclaiming text and data :
+   The following macros specify special linker sections that can be reclaimed
+   after a system is considered 'up'.
+ */ 
+#if defined(__GNUC__) && defined(BCMRECLAIM)
+extern bool	bcmreclaimed;
+#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini." #_data))) _data##_ini		
+#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini." #_fn))) _fn##_ini
+#define BCMINIT(_id)		_id##_ini
+#else 
+#define BCMINITDATA(_data)	_data		
+#define BCMINITFN(_fn)		_fn
+#define BCMINIT(_id)		_id
+#define bcmreclaimed		0
+#endif
+
+/*----------------------- define PTRSZ, INLINE ----------------------------*/
+
+#ifndef PTRSZ
+#define	PTRSZ	sizeof (char*)
+#endif
+
+#ifndef INLINE
+
+#ifdef _MSC_VER
+
+#define INLINE __inline
+
+#elif __GNUC__
+
+#define INLINE __inline__
+
+#else
+
+#define INLINE
+
+#endif /* _MSC_VER */
+
+#endif /* INLINE */
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_UINTPTR
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+#endif /* _TYPEDEFS_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/wlioctl.h linux.dev/arch/mips/bcm947xx/include/wlioctl.h
--- linux.old/arch/mips/bcm947xx/include/wlioctl.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/wlioctl.h	2005-11-07 22:51:38.792727000 +0100
@@ -0,0 +1,1030 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _wlioctl_h_
+#define	_wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/bcmeth.h>
+#include <proto/bcmevent.h>
+#include <proto/802.11.h>
+
+/* require default structure packing */
+#if !defined(__GNUC__)
+#pragma pack(push,8)
+#endif
+
+#define WL_NUMRATES		255	/* max # of rates in a rateset */
+
+typedef struct wl_rateset {
+	uint32	count;			/* # rates in this set */
+	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+#define WL_CHANSPEC_CHAN_MASK	0x0fff
+#define WL_CHANSPEC_BAND_MASK	0xf000
+#define WL_CHANSPEC_BAND_SHIFT	12
+#define WL_CHANSPEC_BAND_A	0x1000
+#define WL_CHANSPEC_BAND_B	0x2000
+
+/*
+ * Per-bss information structure.
+ */
+
+#define	WL_BSS_INFO_VERSION		107	/* current version of wl_bss_info struct */
+
+typedef struct wl_bss_info {
+	uint32		version;	/* version field */
+	uint32		length;		/* byte length of data in this record, starting at version and including IEs */
+	struct ether_addr BSSID;
+	uint16		beacon_period;	/* units are Kusec */
+	uint16		capability;	/* Capability information */
+	uint8		SSID_len;
+	uint8		SSID[32];
+	struct {
+		uint	count;		/* # rates in this set */
+		uint8	rates[16];	/* rates in 500kbps units w/hi bit set if basic */
+	} rateset;			/* supported rates */
+	uint8		channel;	/* Channel no. */
+	uint16		atim_window;	/* units are Kusec */
+	uint8		dtim_period;	/* DTIM period */
+	int16		RSSI;		/* receive signal strength (in dBm) */
+	int8		phy_noise;	/* noise (in dBm) */
+	uint32		ie_length;	/* byte length of Information Elements */
+	/* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+	uint32		SSID_len;
+	uchar		SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+	wlc_ssid_t ssid;	/* default is {0, ""} */
+	struct ether_addr bssid;/* default is bcast */
+	int8 bss_type;		/* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
+	int8 scan_type;		/* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+	int32 nprobes;		/* -1 use default, number of probes per channel */
+	int32 active_time;	/* -1 use default, dwell time per channel for active scanning */
+	int32 passive_time;	/* -1 use default, dwell time per channel for passive scanning */
+	int32 home_time;	/* -1 use default, dwell time for the home channel between channel scans */
+	int32 channel_num;	/* 0 use default (all available channels), count of channels in channel_list */
+	uint16 channel_list[1];	/* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+	uint32 buflen;
+	uint32 version;
+	uint32 count;
+	wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+	/* in - # of elements, out - # of entries */
+	uint32 count;
+	/* variable length uint32 list */
+	uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ	4		/* Country string is 3 bytes + NULL */
+
+typedef struct wl_channels_in_country {
+	uint32 buflen;
+	uint32 band;
+	char country_abbrev[WLC_CNTRY_BUF_SZ];
+	uint32 count;
+	uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+	uint32 buflen;
+	uint32 band_set;
+	uint32 band;
+	uint32 count;
+	char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC	1
+#define WL_RM_TYPE_CCA		2
+#define WL_RM_TYPE_RPI		3
+
+#define WL_RM_FLAG_PARALLEL	(1<<0)
+
+#define WL_RM_FLAG_LATE		(1<<1)
+#define WL_RM_FLAG_INCAPABLE	(1<<2)
+#define WL_RM_FLAG_REFUSED	(1<<3)
+
+typedef struct wl_rm_req_elt {
+	int8	type;
+	int8	flags;
+	uint16	chanspec;
+	uint32	token;		/* token for this measurement */
+	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
+	uint32	tsf_l;		/* TSF low 32-bits */
+	uint32	dur;		/* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+	uint32	token;		/* overall measurement set token */
+	uint32	count;		/* number of measurement reqests */
+	wl_rm_req_elt_t	req[1];	/* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN	8
+
+typedef struct wl_rm_rep_elt {
+	int8	type;
+	int8	flags;
+	uint16	chanspec;
+	uint32	token;		/* token for this measurement */
+	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
+	uint32	tsf_l;		/* TSF low 32-bits */
+	uint32	dur;		/* TUs */
+	uint32	len;		/* byte length of data block */
+	uint8	data[1];	/* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+	uint8	rpi[WL_RPI_REP_BIN_NUM];
+	int8	rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+	uint32	token;		/* overall measurement set token */
+	uint32	len;		/* length of measurement report block */
+	wl_rm_rep_elt_t	rep[1];	/* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN	8
+
+
+#if defined(BCMSUP_PSK)
+typedef enum sup_auth_status {
+	WLC_SUP_DISCONNECTED = 0,
+	WLC_SUP_CONNECTING,
+	WLC_SUP_IDREQUIRED,
+	WLC_SUP_AUTHENTICATING,
+	WLC_SUP_AUTHENTICATED,
+	WLC_SUP_KEYXCHANGE,
+	WLC_SUP_KEYED,
+	WLC_SUP_TIMEOUT
+} sup_auth_status_t;
+#endif	/* BCMCCX | BCMSUP_PSK */
+
+/* Enumerate crypto algorithms */
+#define	CRYPTO_ALGO_OFF			0
+#define	CRYPTO_ALGO_WEP1		1
+#define	CRYPTO_ALGO_TKIP		2
+#define	CRYPTO_ALGO_WEP128		3
+#define CRYPTO_ALGO_AES_CCM		4
+#define CRYPTO_ALGO_AES_OCB_MSDU	5
+#define CRYPTO_ALGO_AES_OCB_MPDU	6
+#define CRYPTO_ALGO_NALG		7
+
+#define WSEC_GEN_MIC_ERROR	0x0001
+#define WSEC_GEN_REPLAY		0x0002
+
+#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
+#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
+
+typedef struct wl_wsec_key {
+	uint32		index;		/* key index */
+	uint32		len;		/* key length */
+	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
+	uint32		pad_1[18];
+	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+	uint32		flags;		/* misc flags */
+	uint32		pad_2[2];
+	int		pad_3;
+	int		iv_initialized;	/* has IV been initialized already? */
+	int		pad_4;
+	/* Rx IV */
+	struct {
+		uint32	hi;		/* upper 32 bits of IV */
+		uint16	lo;		/* lower 16 bits of IV */
+	} rxiv;
+	uint32		pad_5[2];
+	struct ether_addr ea;		/* per station */
+} wl_wsec_key_t;
+
+
+#define WSEC_MIN_PSK_LEN	8
+#define WSEC_MAX_PSK_LEN	64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE		(1<<0)
+
+/* recepticle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+	ushort	key_len;		/* octets in key material */
+	ushort	flags;			/* key handling qualification */
+	uint8	key[WSEC_MAX_PSK_LEN];	/* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED		0x0001
+#define TKIP_ENABLED		0x0002
+#define AES_ENABLED		0x0004
+#define WSEC_SWFLAG		0x0008
+#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
+#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
+/*#define WPA_AUTH_8021X 0x0020*/	/* 802.1x, reserved */
+
+#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
+#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
+
+
+
+/* pmkid */
+#define	MAXPMKID		16	
+
+typedef struct _pmkid
+{
+	struct ether_addr	BSSID;
+	uint8			PMKID[WPA2_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list
+{
+	uint32	npmkid;
+	pmkid_t	pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+	struct ether_addr	BSSID;
+	uint8			preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+	uint32	npmkid_cand;
+	pmkid_cand_t	pmkid_cand[1];
+} pmkid_cand_list_t;
+
+
+typedef struct wl_led_info {
+	uint32		index;		/* led index */
+	uint32		behavior;
+	bool		activehi;
+} wl_led_info_t;
+
+typedef struct wlc_assoc_info {
+	uint32		req_len;
+	uint32		resp_len;
+	uint32		flags;
+	struct dot11_assoc_req req;
+	struct ether_addr reassoc_bssid; /* used in reassoc's */
+	struct dot11_assoc_resp resp;
+} wl_assoc_info_t;
+/* flags */
+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+/* srom read/write struct passed through ioctl */
+typedef struct {
+	uint	byteoff;		/* byte offset */
+	uint	nbytes;		/* number of bytes */
+	uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+	uint32	byteoff;	/* byte offset of the field in d11regs_t */
+	uint32	val;		/* read/write value of the field */
+	uint32	size;		/* sizeof the field */
+	uint	band;		/* band (optional) */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls */
+typedef struct {
+	uint16	auto_ctrl;	/* 1: Automatic control, 0: overriden */
+	uint16	bb;		/* Baseband attenuation */
+	uint16	radio;		/* Radio attenuation */
+	uint16	txctl1;		/* Radio TX_CTL1 value */
+} atten_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+	uint32	val;
+	struct ether_addr ea;
+} scb_val_t;
+
+
+/* Event data type */
+typedef struct wlc_event {
+	wl_event_msg_t event; /* encapsulated event */	
+	struct ether_addr *addr; /* used to keep a trace of the potential present of
+							an address in wlc_event_msg_t */
+	void *data;			/* used to hang additional data on an event */
+	struct wlc_event *next;	/* enables ordered list of pending events */
+} wlc_event_t;
+
+#define BCM_MAC_STATUS_INDICATION           (0x40010200L)
+
+typedef struct {
+	uint16		ver;		/* version of this struct */
+	uint16		len;		/* length in bytes of this structure */
+	uint16		cap;		/* sta's advertized capabilities */
+	uint32		flags;		/* flags defined below */
+	uint32		idle;		/* time since data pkt rx'd from sta */
+	struct ether_addr	ea;	/* Station address */
+	wl_rateset_t	rateset;	/* rateset in use */
+	uint32		in;		/* seconds elapsed since associated */
+	uint32		listen_interval_inms; /* Min Listen interval in ms for this STA*/
+} sta_info_t;
+
+#define WL_STA_VER	2
+
+/* flags fields */
+#define WL_STA_BRCM	0x01
+#define WL_STA_WME	0x02
+#define WL_STA_ABCAP	0x04
+#define WL_STA_AUTHE	0x08
+#define WL_STA_ASSOC	0x10
+#define WL_STA_AUTHO	0x20
+#define WL_STA_WDS	0x40
+#define WL_WDS_LINKUP	0x80
+
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+	WLC_WW = 0,	/* Worldwide */
+	WLC_THA,	/* Thailand */
+	WLC_ISR,	/* Israel */
+	WLC_JDN,	/* Jordan */
+	WLC_PRC,	/* China */
+	WLC_JPN,	/* Japan */
+	WLC_FCC,	/* USA */
+	WLC_EUR,	/* Europe */
+	WLC_USL,	/* US Low Band only */
+	WLC_JPH,	/* Japan High Band only */
+	WLC_ALL,	/* All the channels in this band */
+	WLC_11D,	/* Represents locale recieved by 11d beacons */
+	WLC_LAST_LOCALE,
+	WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+	int hw_channel;
+	int target_channel;
+	int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+	uint count;			/* number of MAC addresses */
+	struct ether_addr ea[1];	/* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+	uint rx_good_pkt;
+	uint rx_bad_pkt;
+	uint tx_good_pkt;
+	uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+	uint cmd;	/* common ioctl definition */
+	void *buf;	/* pointer to user buffer */
+	uint len;	/* length of user buffer */
+	bool set;	/* get or set request (optional) */
+	uint used;	/* bytes read or written (optional) */
+	uint needed;	/* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+	uint		vendorid;	/* PCI vendor id */
+	uint		deviceid;	/* device id of chip */
+	uint		radiorev;	/* radio revision */
+	uint		chiprev;	/* chip revision */
+	uint		corerev;	/* core revision */
+	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
+	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
+	uint		boardrev;	/* board revision */
+	uint		driverrev;	/* driver version */
+	uint		ucoderev;	/* microcode version */
+	uint		bus;		/* bus type */
+	uint		chipnum;	/* chip number */
+} wlc_rev_info_t;
+
+#define WL_BRAND_MAX 10
+typedef struct wl_instance_info {
+	uint instance;
+	char brand[WL_BRAND_MAX];
+} wl_instance_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC		0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION	1
+
+#define	WLC_IOCTL_MAXLEN	8192		/* max length ioctl buffer required */
+#define	WLC_IOCTL_SMLEN		256		/* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC				0
+#define WLC_GET_VERSION				1
+#define WLC_UP						2
+#define WLC_DOWN					3
+#define WLC_DUMP					6
+#define WLC_GET_MSGLEVEL			7
+#define WLC_SET_MSGLEVEL			8
+#define WLC_GET_PROMISC				9
+#define WLC_SET_PROMISC				10
+#define WLC_GET_RATE				12
+/* #define WLC_SET_RATE				13 */ /* no longer supported */
+#define WLC_GET_INSTANCE			14
+/* #define WLC_GET_FRAG				15 */ /* no longer supported */
+/* #define WLC_SET_FRAG				16 */ /* no longer supported */
+/* #define WLC_GET_RTS				17 */ /* no longer supported */
+/* #define WLC_SET_RTS				18 */ /* no longer supported */
+#define WLC_GET_INFRA				19
+#define WLC_SET_INFRA				20
+#define WLC_GET_AUTH				21
+#define WLC_SET_AUTH				22
+#define WLC_GET_BSSID				23
+#define WLC_SET_BSSID				24
+#define WLC_GET_SSID				25
+#define WLC_SET_SSID				26
+#define WLC_RESTART				27
+#define WLC_GET_CHANNEL				29
+#define WLC_SET_CHANNEL				30
+#define WLC_GET_SRL				31
+#define WLC_SET_SRL				32
+#define WLC_GET_LRL				33
+#define WLC_SET_LRL				34
+#define WLC_GET_PLCPHDR				35
+#define WLC_SET_PLCPHDR				36
+#define WLC_GET_RADIO				37
+#define WLC_SET_RADIO				38
+#define WLC_GET_PHYTYPE				39
+/* #define WLC_GET_WEP				42 */ /* no longer supported */
+/* #define WLC_SET_WEP				43 */ /* no longer supported */
+#define WLC_GET_KEY					44
+#define WLC_SET_KEY					45
+#define WLC_GET_REGULATORY			46
+#define WLC_SET_REGULATORY			47
+#define WLC_SCAN					50
+#define WLC_SCAN_RESULTS			51
+#define WLC_DISASSOC				52
+#define WLC_REASSOC					53
+#define WLC_GET_ROAM_TRIGGER		54
+#define WLC_SET_ROAM_TRIGGER			55
+#define WLC_GET_TXANT				61
+#define WLC_SET_TXANT				62
+#define WLC_GET_ANTDIV				63
+#define WLC_SET_ANTDIV				64
+/* #define WLC_GET_TXPWR			65 */ /* no longer supported */
+/* #define WLC_SET_TXPWR			66 */ /* no longer supported */
+#define WLC_GET_CLOSED				67
+#define WLC_SET_CLOSED				68
+#define WLC_GET_MACLIST				69
+#define WLC_SET_MACLIST				70
+#define WLC_GET_RATESET				71
+#define WLC_SET_RATESET				72
+#define WLC_GET_LOCALE				73
+#define WLC_LONGTRAIN				74
+#define WLC_GET_BCNPRD				75
+#define WLC_SET_BCNPRD				76
+#define WLC_GET_DTIMPRD				77
+#define WLC_SET_DTIMPRD				78
+#define WLC_GET_SROM				79
+#define WLC_SET_SROM				80
+#define WLC_GET_WEP_RESTRICT			81
+#define WLC_SET_WEP_RESTRICT			82
+#define WLC_GET_COUNTRY				83
+#define WLC_SET_COUNTRY				84
+#define WLC_GET_REVINFO				98
+#define WLC_GET_MACMODE				105
+#define WLC_SET_MACMODE				106
+#define WLC_GET_GMODE				109
+#define WLC_SET_GMODE				110
+#define WLC_GET_CURR_RATESET			114	/* current rateset */
+#define WLC_GET_SCANSUPPRESS			115
+#define WLC_SET_SCANSUPPRESS			116
+#define WLC_GET_AP				117
+#define WLC_SET_AP				118
+#define WLC_GET_EAP_RESTRICT			119
+#define WLC_SET_EAP_RESTRICT			120
+#define WLC_GET_WDSLIST				123
+#define WLC_SET_WDSLIST				124
+#define WLC_GET_RSSI				127
+#define WLC_GET_WSEC				133
+#define WLC_SET_WSEC				134
+#define WLC_GET_BSS_INFO			136
+#define WLC_GET_LAZYWDS				138
+#define WLC_SET_LAZYWDS				139
+#define WLC_GET_BANDLIST			140
+#define WLC_GET_BAND				141
+#define WLC_SET_BAND				142
+#define WLC_GET_SHORTSLOT			144
+#define WLC_GET_SHORTSLOT_OVERRIDE		145
+#define WLC_SET_SHORTSLOT_OVERRIDE		146
+#define WLC_GET_SHORTSLOT_RESTRICT		147
+#define WLC_SET_SHORTSLOT_RESTRICT		148
+#define WLC_GET_GMODE_PROTECTION		149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
+#define WLC_UPGRADE						152
+/* #define WLC_GET_MRATE				153 */ /* no longer supported */
+/* #define WLC_SET_MRATE				154 */ /* no longer supported */
+#define WLC_GET_ASSOCLIST				159
+#define WLC_GET_CLK						160
+#define WLC_SET_CLK						161
+#define WLC_GET_UP						162
+#define WLC_OUT							163
+#define WLC_GET_WPA_AUTH				164
+#define WLC_SET_WPA_AUTH			165
+#define WLC_GET_GMODE_PROTECTION_CONTROL	178
+#define WLC_SET_GMODE_PROTECTION_CONTROL	179
+#define WLC_GET_PHYLIST				180
+#define WLC_GET_KEY_SEQ				183
+#define WLC_GET_GMODE_PROTECTION_CTS		198
+#define WLC_SET_GMODE_PROTECTION_CTS		199
+#define WLC_GET_PIOMODE				203
+#define WLC_SET_PIOMODE				204
+#define WLC_SET_LED				209
+#define WLC_GET_LED				210
+#define WLC_GET_CHANNEL_SEL			215
+#define WLC_START_CHANNEL_SEL			216
+#define WLC_GET_VALID_CHANNELS			217
+#define WLC_GET_FAKEFRAG			218
+#define WLC_SET_FAKEFRAG			219
+#define WLC_GET_WET				230
+#define WLC_SET_WET				231
+#define WLC_GET_KEY_PRIMARY			235
+#define WLC_SET_KEY_PRIMARY			236
+#define WLC_GET_RADAR				242
+#define WLC_SET_RADAR				243
+#define WLC_SET_SPECT_MANAGMENT			244
+#define WLC_GET_SPECT_MANAGMENT			245
+#define WLC_WDS_GET_REMOTE_HWADDR		246	/* currently handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER			248
+#define WLC_GET_CS_SCAN_TIMER			249
+#define WLC_SEND_PWR_CONSTRAINT			254
+#define WLC_CURRENT_PWR				256
+#define WLC_GET_CHANNELS_IN_COUNTRY		260
+#define WLC_GET_COUNTRY_LIST			261
+#define WLC_GET_VAR				262	/* get value of named variable */
+#define WLC_SET_VAR				263	/* set named variable to value */
+#define WLC_NVRAM_GET				264
+#define WLC_NVRAM_SET				265
+#define WLC_SET_WSEC_PMK			268
+#define WLC_GET_AUTH_MODE			269
+#define WLC_SET_AUTH_MODE			270
+#define WLC_NDCONFIG_ITEM			273	/* currently handled in wl_oid.c */
+#define WLC_NVOTPW					274
+/* #define WLC_OTPW					275 */ /* no longer supported */
+#define WLC_SET_LOCALE				278
+#define WLC_LAST				279	/* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE		0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE		0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+#define WL_DECRYPT_STATUS_SUCCESS	1
+#define WL_DECRYPT_STATUS_FAILURE	2
+#define WL_DECRYPT_STATUS_UNKNOWN	3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS			0
+#define WLC_UPGRADE_PENDING			1
+
+#ifdef CONFIG_USBRNDIS_RETAIL
+/* struct passed in for WLC_NDCONFIG_ITEM */
+typedef struct {
+	char *name;
+	void *param;
+} ndconfig_item_t;
+#endif
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE		(1<<0)
+#define WL_RADIO_HW_DISABLE		(1<<1)
+#define WL_RADIO_MPC_DISABLE		(1<<2)
+#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any 802.11 channel */
+
+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE	(1<<31)
+
+/* "diag" iovar argument and error code */
+#define WL_DIAG_INTERRUPT			1	/* d11 loopback interrupt test */
+#define WL_DIAG_MEMORY				3	/* d11 memory test */
+#define WL_DIAG_LED				4	/* LED test */
+#define WL_DIAG_REG				5	/* d11/phy register test */
+#define WL_DIAG_SROM				6	/* srom read/crc test */
+#define WL_DIAG_DMA				7	/* DMA test */
+
+#define WL_DIAGERR_SUCCESS			0
+#define WL_DIAGERR_FAIL_TO_RUN			1	/* unable to run requested diag */
+#define WL_DIAGERR_NOT_SUPPORTED		2	/* diag requested is not supported */
+#define WL_DIAGERR_INTERRUPT_FAIL		3	/* loopback interrupt test failed */
+#define WL_DIAGERR_LOOPBACK_FAIL		4	/* loopback data test failed */
+#define WL_DIAGERR_SROM_FAIL			5	/* srom read failed */
+#define WL_DIAGERR_SROM_BADCRC			6	/* srom crc failed */
+#define WL_DIAGERR_REG_FAIL			7	/* d11/phy register test failed */
+#define WL_DIAGERR_MEMORY_FAIL			8	/* d11 memory test failed */
+#define WL_DIAGERR_NOMEM			9	/* diag test failed due to no memory */
+#define WL_DIAGERR_DMA_FAIL			10	/* DMA test failed */
+
+/* Bus types */
+#define WL_SB_BUS	0	/* Silicon Backplane */
+#define WL_PCI_BUS	1	/* PCI target */
+#define WL_PCMCIA_BUS	2	/* PCMCIA target */
+
+/* band types */
+#define	WLC_BAND_AUTO		0	/* auto-select */
+#define	WLC_BAND_A		1	/* "a" band (5 Ghz) */
+#define	WLC_BAND_B		2	/* "b" band (2.4 Ghz) */
+#define	WLC_BAND_ALL		3	/* all bands */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define	WLC_PHY_TYPE_A		0
+#define	WLC_PHY_TYPE_B		1
+#define	WLC_PHY_TYPE_G		2
+#define	WLC_PHY_TYPE_NULL	0xf
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
+#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */
+
+/*
+ *
+ */
+#define GMODE_LEGACY_B		0
+#define GMODE_AUTO		1
+#define GMODE_ONLY		2
+#define GMODE_B_DEFERRED	3
+#define GMODE_PERFORMANCE	4
+#define GMODE_LRS		5
+#define GMODE_MAX		6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO	-1
+#define WLC_PLCP_SHORT	0
+#define WLC_PLCP_LONG	1
+
+/* values for g_protection_override */
+#define WLC_G_PROTECTION_AUTO	-1
+#define WLC_G_PROTECTION_OFF	0
+#define WLC_G_PROTECTION_ON	1
+
+/* values for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF	0
+#define WLC_G_PROTECTION_CTL_LOCAL	1
+#define WLC_G_PROTECTION_CTL_OVERLAP	2
+
+/* Values for PM */
+#define PM_OFF	0
+#define PM_MAX	1
+#define PM_FAST 2
+
+
+
+typedef struct {
+	int npulses; 	/* required number of pulses at n * t_int */
+	int ncontig; 	/* required number of pulses at t_int */
+	int min_pw; 	/* minimum pulse width (20 MHz clocks) */
+	int max_pw; 	/* maximum pulse width (20 MHz clocks) */	
+	uint16 thresh0;	/* Radar detection, thresh 0 */
+	uint16 thresh1;	/* Radar detection, thresh 1 */
+} wl_radar_args_t;
+
+/* radar iovar SET defines */
+#define WL_RADRA_DETECTOR_OFF		0	/* radar dector off */
+#define WL_RADAR_DETECTOR_ON		1	/* radar detector on */
+#define WL_RADAR_SIMULATED		2	/* force radar detector to declare detection once */
+
+/* dfs_status iovar-related defines */
+
+/* cac - channel availability check,
+ * ism - in-service monitoring
+ * csa - channel switching anouncement
+ */
+
+/* cac state values */
+#define WL_DFS_CACSTATE_IDLE		0	/* state for operating in non-radar channel */
+#define	WL_DFS_CACSTATE_PREISM_CAC	1	/* CAC in progress */
+#define WL_DFS_CACSTATE_ISM		2	/* ISM in progress */
+#define WL_DFS_CACSTATE_CSA		3	/* csa */
+#define WL_DFS_CACSTATE_POSTISM_CAC	4	/* ISM CAC */
+#define WL_DFS_CACSTATE_PREISM_OOC	5	/* PREISM OOC */
+#define WL_DFS_CACSTATE_POSTISM_OOC	6	/* POSTISM OOC */
+#define WL_DFS_CACSTATES		7	/* this many states exist */
+
+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
+typedef struct {
+	uint state;		/* noted by WL_DFS_CACSTATE_XX. */
+	uint duration;		/* time spent in ms in state. */
+	/* as dfs enters ISM state, it removes the operational channel from quiet channel list
+	 * and notes the channel in channel_cleared. set to 0 if no channel is cleared
+	 */
+	uint channel_cleared;
+} wl_dfs_status_t;
+
+#define NUM_PWRCTRL_RATES 12
+
+
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF		0		/* 11h disabled */
+#define SPECT_MNGMT_LOOSE	1		/* allow scan lists to contain non-11h AP */
+#define SPECT_MNGMT_STRICT	2		/* prune out non-11h APs from scan list */
+#define SPECT_MNGMT_11D		3		/* switch to 802.11D mode */
+
+#define WL_CHAN_VALID_HW	(1 << 0)	/* valid with current HW */
+#define WL_CHAN_VALID_SW	(1 << 1)	/* valid with current country setting */
+#define WL_CHAN_BAND_A		(1 << 2)	/* A-band channel */
+#define WL_CHAN_RADAR		(1 << 3)	/* radar sensitive  channel */
+#define WL_CHAN_INACTIVE	(1 << 4)	/* temporarily out of service due to radar */
+#define WL_CHAN_RADAR_PASSIVE	(1 << 5)	/* radar channel is in passive mode */
+
+#define WL_MPC_VAL		0x00400000
+#define WL_APSTA_VAL		0x00800000
+#define WL_DFS_VAL		0x01000000
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define	WL_LED_OFF		0		/* always off */
+#define	WL_LED_ON		1		/* always on */
+#define	WL_LED_ACTIVITY		2		/* activity */
+#define	WL_LED_RADIO		3		/* radio enabled */
+#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
+#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
+#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
+#define	WL_LED_WI1		7		
+#define	WL_LED_WI2		8		
+#define	WL_LED_WI3		9		
+#define	WL_LED_ASSOC		10		/* associated state indicator */
+#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
+#define	WL_LED_NUMBEHAVIOR	12
+
+/* led behavior numeric value format */
+#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
+#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
+
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH	0	/* authenticator */
+#define WL_WDS_WPA_ROLE_SUP	1	/* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO	255	/* auto, based on mac addr value */
+
+/* number of bytes needed to define a 128-bit mask for MAC event reporting */
+#define WL_EVENTING_MASK_LEN	16
+
+/* Structures and constants used for "vndr_ie" IOVar interface */
+#define VNDR_IE_CMD_LEN		4	/* length of the set command string: "add", "del" (+ NULL) */
+
+/* 802.11 Mgmt Packet flags */
+#define VNDR_IE_BEACON_FLAG	0x1
+#define VNDR_IE_PRBRSP_FLAG	0x2
+#define VNDR_IE_ASSOCRSP_FLAG	0x4
+#define VNDR_IE_AUTHRSP_FLAG	0x8
+
+typedef struct {
+	uint32 pktflag;			/* bitmask indicating which packet(s) contain this IE */
+	vndr_ie_t vndr_ie_data;		/* vendor IE data */
+} vndr_ie_info_t;
+
+typedef struct {
+	int iecount;			/* number of entries in the vndr_ie_list[] array */
+	vndr_ie_info_t vndr_ie_list[1];	/* variable size list of vndr_ie_info_t structs */
+} vndr_ie_buf_t;
+
+typedef struct {
+	char cmd[VNDR_IE_CMD_LEN];	/* vndr_ie IOVar set command : "add", "del" + NULL */
+	vndr_ie_buf_t vndr_ie_buffer;	/* buffer containing Vendor IE list information */
+} vndr_ie_setbuf_t;
+
+/* join target preference types */
+#define WL_JOIN_PREF_RSSI	1	/* by RSSI, mandatory */
+#define WL_JOIN_PREF_WPA	2	/* by akm and ciphers, optional, RSN and WPA as values */
+#define WL_JOIN_PREF_BAND	3	/* by 802.11 band, optional, WLC_BAND_XXXX as values */
+
+/* band preference */
+#define WLJP_BAND_ASSOC_PREF	255	/* use assoc preference settings */
+					/* others use WLC_BAND_XXXX as values */
+
+/* any multicast cipher suite */
+#define WL_WPA_ACP_MCS_ANY	"\x00\x00\x00\x00"
+
+#if !defined(__GNUC__)
+#pragma pack(pop)
+#endif
+
+#define	NFIFO				6	/* # tx/rx fifopairs */
+
+#define	WL_CNT_T_VERSION		1	/* current version of wl_cnt_t struct */
+
+typedef struct {
+	uint16	version;	/* see definition of WL_CNT_T_VERSION */	
+	uint16	length;		/* length of entire structure */
+
+ 	/* transmit stat counters */
+	uint32	txframe;	/* tx data frames */
+	uint32	txbyte;		/* tx data bytes */
+	uint32	txretrans;	/* tx mac retransmits */
+	uint32	txerror;	/* tx data errors */
+	uint32	txctl;		/* tx management frames */
+	uint32	txprshort;	/* tx short preamble frames */
+	uint32	txserr;		/* tx status errors */
+	uint32	txnobuf;	/* tx out of buffers errors */
+	uint32	txnoassoc;	/* tx discard because we're not associated */
+	uint32	txrunt;		/* tx runt frames */
+	uint32	txchit;		/* tx header cache hit (fastpath) */
+	uint32	txcmiss;	/* tx header cache miss (slowpath) */
+
+	/* transmit chip error counters */
+	uint32	txuflo;		/* tx fifo underflows */
+	uint32	txphyerr;	/* tx phy errors (indicated in tx status) */
+	uint32	txphycrs;	
+
+	/* receive stat counters */
+	uint32	rxframe;	/* rx data frames */
+	uint32	rxbyte;		/* rx data bytes */
+	uint32	rxerror;	/* rx data errors */
+	uint32	rxctl;		/* rx management frames */
+	uint32	rxnobuf;	/* rx out of buffers errors */
+	uint32	rxnondata;	/* rx non data frames in the data channel errors */
+	uint32	rxbadds;	/* rx bad DS errors */
+	uint32	rxbadcm;	/* rx bad control or management frames */
+	uint32	rxfragerr;	/* rx fragmentation errors */
+	uint32	rxrunt;		/* rx runt frames */
+	uint32	rxgiant;	/* rx giant frames */
+	uint32	rxnoscb;	/* rx no scb error */
+	uint32	rxbadproto;	/* rx invalid frames */
+	uint32	rxbadsrcmac;	/* rx frames with Invalid Src Mac*/
+	uint32	rxbadda;	/* rx frames tossed for invalid da */
+	uint32	rxfilter;	/* rx frames filtered out */
+
+	/* receive chip error counters */
+	uint32	rxoflo;		/* rx fifo overflow errors */
+	uint32	rxuflo[NFIFO];	/* rx dma descriptor underflow errors */
+
+	uint32	d11cnt_txrts_off;	/* d11cnt txrts value when reset d11cnt */
+	uint32	d11cnt_rxcrc_off;	/* d11cnt rxcrc value when reset d11cnt */
+	uint32	d11cnt_txnocts_off;	/* d11cnt txnocts value when reset d11cnt */
+
+	/* misc counters */
+	uint32	dmade;		/* tx/rx dma descriptor errors */
+	uint32	dmada;		/* tx/rx dma data errors */
+	uint32	dmape;		/* tx/rx dma descriptor protocol errors */
+	uint32	reset;		/* reset count */
+	uint32	tbtt;		/* cnts the TBTT int's */
+	uint32	txdmawar;	
+
+	/* MAC counters: 32-bit version of d11.h's macstat_t */
+	uint32	txallfrm;	/* total number of frames sent, incl. Data, ACK, RTS, CTS, 
+				   Control Management (includes retransmissions) */
+	uint32	txrtsfrm;	/* number of RTS sent out by the MAC */
+	uint32	txctsfrm;	/* number of CTS sent out by the MAC */
+	uint32	txackfrm;	/* number of ACK frames sent out */
+	uint32	txdnlfrm;	/* Not used */
+	uint32	txbcnfrm;	/* beacons transmitted */
+	uint32	txfunfl[8];	/* per-fifo tx underflows */
+	uint32	txtplunfl;	/* Template underflows (mac was too slow to transmit ACK/CTS or BCN) */
+	uint32	txphyerror;	/* Transmit phy error, type of error is reported in tx-status for
+				   driver enqueued frames*/
+	uint32	rxfrmtoolong;	/* Received frame longer than legal limit (2346 bytes) */
+	uint32	rxfrmtooshrt;	/* Received frame did not contain enough bytes for its frame type */
+	uint32	rxinvmachdr;	/* Either the protocol version != 0 or frame type not
+				   data/control/management*/
+	uint32	rxbadfcs;	/* number of frames for which the CRC check failed in the MAC */
+	uint32	rxbadplcp;	/* parity check of the PLCP header failed */
+	uint32	rxcrsglitch;	/* PHY was able to correlate the preamble but not the header */
+	uint32	rxstrt;		/* Number of received frames with a good PLCP (i.e. passing parity check) */
+	uint32	rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
+	uint32	rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
+	uint32	rxcfrmucast;	/* number of received CNTRL frames with good FCS and matching RA */
+	uint32	rxrtsucast;	/* number of unicast RTS addressed to the MAC (good FCS) */
+	uint32	rxctsucast;	/* number of unicast CTS addressed to the MAC (good FCS)*/
+	uint32	rxackucast;	/* number of ucast ACKS received (good FCS)*/
+	uint32	rxdfrmocast;	/* number of received DATA frames with good FCS and not matching RA */
+	uint32	rxmfrmocast;	/* number of received MGMT frames with good FCS and not matching RA */
+	uint32	rxcfrmocast;	/* number of received CNTRL frame with good FCS and not matching RA */
+	uint32	rxrtsocast;	/* number of received RTS not addressed to the MAC */
+	uint32	rxctsocast;	/* number of received CTS not addressed to the MAC */
+	uint32	rxdfrmmcast;	/* number of RX Data multicast frames received by the MAC */
+	uint32	rxmfrmmcast;	/* number of RX Management multicast frames received by the MAC */
+	uint32	rxcfrmmcast;	/* number of RX Control multicast frames received by the MAC (unlikely
+				   to see these) */
+	uint32	rxbeaconmbss;	/* beacons received from member of BSS */
+	uint32	rxdfrmucastobss; /* number of unicast frames addressed to the MAC from other BSS (WDS FRAME) */
+	uint32	rxbeaconobss;	/* beacons received from other BSS */
+	uint32	rxrsptmout;	/* Number of response timeouts for transmitted frames expecting a
+				   response */
+	uint32	bcntxcancl;	/* transmit beacons cancelled due to receipt of beacon (IBSS) */
+	uint32	rxf0ovfl;	/* Number of receive fifo 0 overflows */
+	uint32	rxf1ovfl;	/* Number of receive fifo 1 overflows (obsolete) */
+	uint32	rxf2ovfl;	/* Number of receive fifo 2 overflows (obsolete) */
+	uint32	txsfovfl;	/* Number of transmit status fifo overflows (obsolete) */
+	uint32	pmqovfl;	/* Number of PMQ overflows */
+	uint32	rxcgprqfrm;	/* Number of received Probe requests that made it into the PRQ fifo */
+	uint32	rxcgprsqovfl;	/* Rx Probe Request Que overflow in the AP */
+	uint32	txcgprsfail;	/* Tx Probe Response Fail. AP sent probe response but did not get ACK */
+	uint32	txcgprssuc;	/* Tx Probe Rresponse Success (ACK was received) */
+	uint32	prs_timeout;	/* Number of probe requests that were dropped from the PRQ fifo because
+				   a probe response could not be sent out within the time limit defined
+				   in M_PRS_MAXTIME */
+	uint32	rxnack;		/* Number of NACKS received (Afterburner) */
+	uint32	frmscons;	/* Number of frames completed without transmission because of an
+				   Afterburner re-queue */
+	uint32	txnack;		/* Number of NACKs transmtitted  (Afterburner) */
+	uint32	txglitch_nack;	/* obsolete */
+	uint32	txburst;	/* obsolete */
+	uint32	rxburst;	/* obsolete */
+
+	/* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
+	uint32	txfrag;		/* dot11TransmittedFragmentCount */
+	uint32	txmulti;	/* dot11MulticastTransmittedFrameCount */
+	uint32	txfail;		/* dot11FailedCount */
+	uint32	txretry;	/* dot11RetryCount */
+	uint32	txretrie;	/* dot11MultipleRetryCount */
+	uint32	rxdup;		/* dot11FrameduplicateCount */
+	uint32	txrts;		/* dot11RTSSuccessCount */
+	uint32	txnocts;	/* dot11RTSFailureCount */
+	uint32	txnoack;	/* dot11ACKFailureCount */
+	uint32	rxfrag;		/* dot11ReceivedFragmentCount */
+	uint32	rxmulti;	/* dot11MulticastReceivedFrameCount */
+	uint32	rxcrc;		/* dot11FCSErrorCount */
+	uint32	txfrmsnt;	/* dot11TransmittedFrameCount (bogus MIB?) */
+	uint32	rxundec;	/* dot11WEPUndecryptableCount */
+
+	/* WPA2 counters (see rxundec for DecryptFailureCount) */
+	uint32	tkipmicfaill;	/* TKIPLocalMICFailures */
+	uint32	tkipcntrmsr;	/* TKIPCounterMeasuresInvoked */
+	uint32	tkipreplay;	/* TKIPReplays */
+	uint32	ccmpfmterr;	/* CCMPFormatErrors */
+	uint32	ccmpreplay;	/* CCMPReplays */
+	uint32	ccmpundec;	/* CCMPDecryptErrors */
+	uint32	fourwayfail;	/* FourWayHandshakeFailures */
+	uint32	wepundec;	/* dot11WEPUndecryptableCount */
+	uint32	wepicverr;	/* dot11WEPICVErrorCount */
+	uint32	decsuccess;	/* DecryptSuccessCount */
+	uint32	tkipicverr;	/* TKIPICVErrorCount */
+	uint32	wepexcluded;	/* dot11WEPExcludedCount */
+} wl_cnt_t;
+
+#endif /* _wlioctl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c
--- linux.old/arch/mips/bcm947xx/nvram.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/nvram.c	2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,321 @@
+/*
+ * NVRAM variable manipulation (common)
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmendian.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+#include <sbsdram.h>
+
+extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value);
+extern void BCMINIT(_nvram_free)(struct nvram_tuple *t);
+extern int BCMINIT(_nvram_read)(void *buf);
+
+char * BCMINIT(_nvram_get)(const char *name);
+int BCMINIT(_nvram_set)(const char *name, const char *value);
+int BCMINIT(_nvram_unset)(const char *name);
+int BCMINIT(_nvram_getall)(char *buf, int count);
+int BCMINIT(_nvram_commit)(struct nvram_header *header);
+int BCMINIT(_nvram_init)(void);
+void BCMINIT(_nvram_exit)(void);
+
+static struct nvram_tuple * BCMINITDATA(nvram_hash)[257];
+static struct nvram_tuple * nvram_dead;
+
+/* Free all tuples. Should be locked. */
+static void  
+BCMINITFN(nvram_free)(void)
+{
+	uint i;
+	struct nvram_tuple *t, *next;
+
+	/* Free hash table */
+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
+		for (t = BCMINIT(nvram_hash)[i]; t; t = next) {
+			next = t->next;
+			BCMINIT(_nvram_free)(t);
+		}
+		BCMINIT(nvram_hash)[i] = NULL;
+	}
+
+	/* Free dead table */
+	for (t = nvram_dead; t; t = next) {
+		next = t->next;
+		BCMINIT(_nvram_free)(t);
+	}
+	nvram_dead = NULL;
+
+	/* Indicate to per-port code that all tuples have been freed */
+	BCMINIT(_nvram_free)(NULL);
+}
+
+/* String hash */
+static INLINE uint
+hash(const char *s)
+{
+	uint hash = 0;
+
+	while (*s)
+		hash = 31 * hash + *s++;
+
+	return hash;
+}
+
+/* (Re)initialize the hash table. Should be locked. */
+static int 
+BCMINITFN(nvram_rehash)(struct nvram_header *header)
+{
+	char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq;
+
+	/* (Re)initialize hash table */
+	BCMINIT(nvram_free)();
+
+	/* Parse and set "name=value\0 ... \0\0" */
+	name = (char *) &header[1];
+	end = (char *) header + NVRAM_SPACE - 2;
+	end[0] = end[1] = '\0';
+	for (; *name; name = value + strlen(value) + 1) {
+		if (!(eq = strchr(name, '=')))
+			break;
+		*eq = '\0';
+		value = eq + 1;
+		BCMINIT(_nvram_set)(name, value);
+		*eq = '=';
+	}
+
+	/* Set special SDRAM parameters */
+	if (!BCMINIT(_nvram_get)("sdram_init")) {
+		sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16));
+		BCMINIT(_nvram_set)("sdram_init", buf);
+	}
+	if (!BCMINIT(_nvram_get)("sdram_config")) {
+		sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff));
+		BCMINIT(_nvram_set)("sdram_config", buf);
+	}
+	if (!BCMINIT(_nvram_get)("sdram_refresh")) {
+		sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff));
+		BCMINIT(_nvram_set)("sdram_refresh", buf);
+	}
+	if (!BCMINIT(_nvram_get)("sdram_ncdl")) {
+		sprintf(buf, "0x%08X", header->config_ncdl);
+		BCMINIT(_nvram_set)("sdram_ncdl", buf);
+	}
+
+	return 0;
+}
+
+/* Get the value of an NVRAM variable. Should be locked. */
+char * 
+BCMINITFN(_nvram_get)(const char *name)
+{
+	uint i;
+	struct nvram_tuple *t;
+	char *value;
+
+	if (!name)
+		return NULL;
+
+	/* Hash the name */
+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
+
+	/* Find the associated tuple in the hash table */
+	for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next);
+
+	value = t ? t->value : NULL;
+
+	return value;
+}
+
+/* Get the value of an NVRAM variable. Should be locked. */
+int 
+BCMINITFN(_nvram_set)(const char *name, const char *value)
+{
+	uint i;
+	struct nvram_tuple *t, *u, **prev;
+
+	/* Hash the name */
+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
+
+	/* Find the associated tuple in the hash table */
+	for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
+
+	/* (Re)allocate tuple */
+	if (!(u = BCMINIT(_nvram_realloc)(t, name, value)))
+		return -12; /* -ENOMEM */
+
+	/* Value reallocated */
+	if (t && t == u)
+		return 0;
+
+	/* Move old tuple to the dead table */
+	if (t) {
+		*prev = t->next;
+		t->next = nvram_dead;
+		nvram_dead = t;
+	}
+
+	/* Add new tuple to the hash table */
+	u->next = BCMINIT(nvram_hash)[i];
+	BCMINIT(nvram_hash)[i] = u;
+
+	return 0;
+}
+
+/* Unset the value of an NVRAM variable. Should be locked. */
+int 
+BCMINITFN(_nvram_unset)(const char *name)
+{
+	uint i;
+	struct nvram_tuple *t, **prev;
+
+	if (!name)
+		return 0;
+
+	/* Hash the name */
+	i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash));
+
+	/* Find the associated tuple in the hash table */
+	for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev);
+
+	/* Move it to the dead table */
+	if (t) {
+		*prev = t->next;
+		t->next = nvram_dead;
+		nvram_dead = t;
+	}
+
+	return 0;
+}
+
+/* Get all NVRAM variables. Should be locked. */
+int 
+BCMINITFN(_nvram_getall)(char *buf, int count)
+{
+	uint i;
+	struct nvram_tuple *t;
+	int len = 0;
+
+	bzero(buf, count);
+
+	/* Write name=value\0 ... \0\0 */
+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
+		for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
+			if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1))
+				len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1;
+			else
+				break;
+		}
+	}
+
+	return 0;
+}
+
+/* Regenerate NVRAM. Should be locked. */
+int
+BCMINITFN(_nvram_commit)(struct nvram_header *header)
+{
+	char *init, *config, *refresh, *ncdl;
+	char *ptr, *end;
+	int i;
+	struct nvram_tuple *t;
+	struct nvram_header tmp;
+	uint8 crc;
+
+	/* Regenerate header */
+	header->magic = NVRAM_MAGIC;
+	header->crc_ver_init = (NVRAM_VERSION << 8);
+	if (!(init = BCMINIT(_nvram_get)("sdram_init")) ||
+	    !(config = BCMINIT(_nvram_get)("sdram_config")) ||
+	    !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) ||
+	    !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) {
+		header->crc_ver_init |= SDRAM_INIT << 16;
+		header->config_refresh = SDRAM_CONFIG;
+		header->config_refresh |= SDRAM_REFRESH << 16;
+		header->config_ncdl = 0;
+	} else {
+		header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16;
+		header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff;
+		header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16;
+		header->config_ncdl = bcm_strtoul(ncdl, NULL, 0);
+	}
+
+	/* Clear data area */
+	ptr = (char *) header + sizeof(struct nvram_header);
+	bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header));
+
+	/* Leave space for a double NUL at the end */
+	end = (char *) header + NVRAM_SPACE - 2;
+
+	/* Write out all tuples */
+	for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) {
+		for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) {
+			if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end)
+				break;
+			ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1;
+		}
+	}
+
+	/* End with a double NUL */
+	ptr += 2;
+
+	/* Set new length */
+	header->len = ROUNDUP(ptr - (char *) header, 4);
+
+	/* Little-endian CRC8 over the last 11 bytes of the header */
+	tmp.crc_ver_init = htol32(header->crc_ver_init);
+	tmp.config_refresh = htol32(header->config_refresh);
+	tmp.config_ncdl = htol32(header->config_ncdl);
+	crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE);
+
+	/* Continue CRC8 over data bytes */
+	crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc);
+
+	/* Set new CRC8 */
+	header->crc_ver_init |= crc;
+
+	/* Reinitialize hash table */
+	return BCMINIT(nvram_rehash)(header);
+}
+
+/* Initialize hash table. Should be locked. */
+int 
+BCMINITFN(_nvram_init)(void)
+{
+	struct nvram_header *header;
+	int ret;
+	void *osh;
+
+	/* get kernel osl handler */
+	osh = osl_attach(NULL);
+
+	if (!(header = (struct nvram_header *) MALLOC(osh, NVRAM_SPACE))) {
+		printf("nvram_init: out of memory, malloced %d bytes\n", MALLOCED(osh));
+		return -12; /* -ENOMEM */
+	}
+
+	if ((ret = BCMINIT(_nvram_read)(header)) == 0 &&
+	    header->magic == NVRAM_MAGIC)
+		BCMINIT(nvram_rehash)(header);
+
+	MFREE(osh, header, NVRAM_SPACE);
+	return ret;
+}
+
+/* Free hash table. Should be locked. */
+void 
+BCMINITFN(_nvram_exit)(void)
+{
+	BCMINIT(nvram_free)();
+}
diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c
--- linux.old/arch/mips/bcm947xx/nvram_linux.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/nvram_linux.c	2005-11-08 00:54:56.755597250 +0100
@@ -0,0 +1,633 @@
+/*
+ * NVRAM variable manipulation (Linux kernel half)
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/bootmem.h>
+#include <linux/wrapper.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/mtd/mtd.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <typedefs.h>
+#include <bcmendian.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sbutils.h>
+#include <sbmips.h>
+#include <sflash.h>
+
+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
+
+#ifdef MODULE
+
+#define early_nvram_get(name) nvram_get(name)
+
+#else /* !MODULE */
+
+/* Global SB handle */
+extern void *bcm947xx_sbh;
+extern spinlock_t bcm947xx_sbh_lock;
+
+/* Convenience */
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+#define KB * 1024
+#define MB * 1024 * 1024
+
+/* Probe for NVRAM header */
+static void __init
+early_nvram_init(void)
+{
+	struct nvram_header *header;
+	chipcregs_t *cc;
+	struct sflash *info = NULL;
+	int i;
+	uint32 base, off, lim;
+	u32 *src, *dst;
+
+	if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
+		base = KSEG1ADDR(SB_FLASH2);
+		switch (readl(&cc->capabilities) & CAP_FLASH_MASK) {
+		case PFLASH:
+			lim = SB_FLASH2_SZ;
+			break;
+
+		case SFLASH_ST:
+		case SFLASH_AT:
+			if ((info = sflash_init(cc)) == NULL)
+				return;
+			lim = info->size;
+			break;
+
+		case FLASH_NONE:
+		default:
+			return;
+		}
+	} else {
+		/* extif assumed, Stop at 4 MB */
+		base = KSEG1ADDR(SB_FLASH1);
+		lim = SB_FLASH1_SZ;
+	}
+
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
+		if (header->magic == NVRAM_MAGIC)
+			goto found;
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *) KSEG1ADDR(base + 4 KB);
+	if (header->magic == NVRAM_MAGIC)
+		goto found;
+	
+	header = (struct nvram_header *) KSEG1ADDR(base + 1 KB);
+	if (header->magic == NVRAM_MAGIC)
+		goto found;
+	
+	printk("early_nvram_init: NVRAM not found\n");
+	return;
+
+found:
+	src = (u32 *) header;
+	dst = (u32 *) nvram_buf;
+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+		*dst++ = *src++;
+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+		*dst++ = ltoh32(*src++);
+}
+
+/* Early (before mm or mtd) read-only access to NVRAM */
+static char * __init
+early_nvram_get(const char *name)
+{
+	char *var, *value, *end, *eq;
+
+	if (!name)
+		return NULL;
+
+	/* Too early? */
+	if (sbh == NULL)
+		return NULL;
+
+	if (!nvram_buf[0])
+		early_nvram_init();
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf) - 2;
+	end[0] = end[1] = '\0';
+	for (; *var; var = value + strlen(value) + 1) {
+		if (!(eq = strchr(var, '=')))
+			break;
+		value = eq + 1;
+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
+			return value;
+	}
+
+	return NULL;
+}
+
+#endif /* !MODULE */
+
+extern char * _nvram_get(const char *name);
+extern int _nvram_set(const char *name, const char *value);
+extern int _nvram_unset(const char *name);
+extern int _nvram_getall(char *buf, int count);
+extern int _nvram_commit(struct nvram_header *header);
+extern int _nvram_init(void);
+extern void _nvram_exit(void);
+
+/* Globals */
+static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED;
+static struct semaphore nvram_sem;
+static unsigned long nvram_offset = 0;
+static int nvram_major = -1;
+static devfs_handle_t nvram_handle = NULL;
+static struct mtd_info *nvram_mtd = NULL;
+
+int
+_nvram_read(char *buf)
+{
+	struct nvram_header *header = (struct nvram_header *) buf;
+	size_t len;
+
+	if (!nvram_mtd ||
+	    MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) ||
+	    len != NVRAM_SPACE ||
+	    header->magic != NVRAM_MAGIC) {
+		/* Maybe we can recover some data from early initialization */
+		memcpy(buf, nvram_buf, NVRAM_SPACE);
+	}
+
+	return 0;
+}
+
+struct nvram_tuple *
+_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value)
+{
+	if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE)
+		return NULL;
+
+	if (!t) {
+		if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC)))
+			return NULL;
+
+		/* Copy name */
+		t->name = (char *) &t[1];
+		strcpy(t->name, name);
+
+		t->value = NULL;
+	}
+
+	/* Copy value */
+	if (!t->value || strcmp(t->value, value)) {
+		t->value = &nvram_buf[nvram_offset];
+		strcpy(t->value, value);
+		nvram_offset += strlen(value) + 1;
+	}
+
+	return t;
+}
+
+void
+_nvram_free(struct nvram_tuple *t)
+{
+	if (!t)
+		nvram_offset = 0;
+	else
+		kfree(t);
+}
+
+int
+nvram_set(const char *name, const char *value)
+{
+	unsigned long flags;
+	int ret;
+	struct nvram_header *header;
+
+	spin_lock_irqsave(&nvram_lock, flags);
+	if ((ret = _nvram_set(name, value))) {
+		/* Consolidate space and try again */
+		if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) {
+			if (_nvram_commit(header) == 0)
+				ret = _nvram_set(name, value);
+			kfree(header);
+		}
+	}
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return ret;
+}
+
+char *
+real_nvram_get(const char *name)
+{
+	unsigned long flags;
+	char *value;
+
+	spin_lock_irqsave(&nvram_lock, flags);
+	value = _nvram_get(name);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return value;
+}
+
+char *
+nvram_get(const char *name)
+{
+	if (nvram_major >= 0)
+		return real_nvram_get(name);
+	else
+		return early_nvram_get(name);
+}
+
+int
+nvram_unset(const char *name)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&nvram_lock, flags);
+	ret = _nvram_unset(name);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return ret;
+}
+
+static void
+erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv;
+	wake_up(wait_q);
+}
+
+int
+nvram_commit(void)
+{
+	char *buf;
+	size_t erasesize, len;
+	unsigned int i;
+	int ret;
+	struct nvram_header *header;
+	unsigned long flags;
+	u_int32_t offset;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	struct erase_info erase;
+
+	if (!nvram_mtd) {
+		printk("nvram_commit: NVRAM not found\n");
+		return -ENODEV;
+	}
+
+	if (in_interrupt()) {
+		printk("nvram_commit: not committing in interrupt\n");
+		return -EINVAL;
+	}
+
+	/* Backup sector blocks to be erased */
+	erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize);
+	if (!(buf = kmalloc(erasesize, GFP_KERNEL))) {
+		printk("nvram_commit: out of memory\n");
+		return -ENOMEM;
+	}
+
+	down(&nvram_sem);
+
+	if ((i = erasesize - NVRAM_SPACE) > 0) {
+		offset = nvram_mtd->size - erasesize;
+		len = 0;
+		ret = MTD_READ(nvram_mtd, offset, i, &len, buf);
+		if (ret || len != i) {
+			printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i);
+			ret = -EIO;
+			goto done;
+		}
+		header = (struct nvram_header *)(buf + i);
+	} else {
+		offset = nvram_mtd->size - NVRAM_SPACE;
+		header = (struct nvram_header *)buf;
+	}
+
+	/* Regenerate NVRAM */
+	spin_lock_irqsave(&nvram_lock, flags);
+	ret = _nvram_commit(header);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+	if (ret)
+		goto done;
+
+	/* Erase sector blocks */
+	init_waitqueue_head(&wait_q);
+	for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) {
+		erase.mtd = nvram_mtd;
+		erase.addr = offset;
+		erase.len = nvram_mtd->erasesize;
+		erase.callback = erase_callback;
+		erase.priv = (u_long) &wait_q;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&wait_q, &wait);
+
+		/* Unlock sector blocks */
+		if (nvram_mtd->unlock)
+			nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize);
+
+		if ((ret = MTD_ERASE(nvram_mtd, &erase))) {
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&wait_q, &wait);
+			printk("nvram_commit: erase error\n");
+			goto done;
+		}
+
+		/* Wait for erase to finish */
+		schedule();
+		remove_wait_queue(&wait_q, &wait);
+	}
+
+	/* Write partition up to end of data area */
+	offset = nvram_mtd->size - erasesize;
+	i = erasesize - NVRAM_SPACE + header->len;
+	ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf);
+	if (ret || len != i) {
+		printk("nvram_commit: write error\n");
+		ret = -EIO;
+		goto done;
+	}
+
+	offset = nvram_mtd->size - erasesize;
+	ret = MTD_READ(nvram_mtd, offset, 4, &len, buf);
+
+ done:
+	up(&nvram_sem);
+	kfree(buf);
+	return ret;
+}
+
+int
+nvram_getall(char *buf, int count)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&nvram_lock, flags);
+	ret = _nvram_getall(buf, count);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(nvram_get);
+EXPORT_SYMBOL(nvram_getall);
+EXPORT_SYMBOL(nvram_set);
+EXPORT_SYMBOL(nvram_unset);
+EXPORT_SYMBOL(nvram_commit);
+
+/* User mode interface below */
+
+static ssize_t
+dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+	char tmp[100], *name = tmp, *value;
+	ssize_t ret;
+	unsigned long off;
+
+	if (count > sizeof(tmp)) {
+		if (!(name = kmalloc(count, GFP_KERNEL)))
+			return -ENOMEM;
+	}
+
+	if (copy_from_user(name, buf, count)) {
+		ret = -EFAULT;
+		goto done;
+	}
+
+	if (*name == '\0') {
+		/* Get all variables */
+		ret = nvram_getall(name, count);
+		if (ret == 0) {
+			if (copy_to_user(buf, name, count)) {
+				ret = -EFAULT;
+				goto done;
+			}
+			ret = count;
+		}
+	} else {
+		if (!(value = nvram_get(name))) {
+			ret = 0;
+			goto done;
+		}
+
+		/* Provide the offset into mmap() space */
+		off = (unsigned long) value - (unsigned long) nvram_buf;
+
+		if (put_user(off, (unsigned long *) buf)) {
+			ret = -EFAULT;
+			goto done;
+		}
+
+		ret = sizeof(unsigned long);
+	}
+
+	flush_cache_all();	
+ 
+done:
+	if (name != tmp)
+		kfree(name);
+
+	return ret;
+}
+
+static ssize_t
+dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+	char tmp[100], *name = tmp, *value;
+	ssize_t ret;
+
+	if (count > sizeof(tmp)) {
+		if (!(name = kmalloc(count, GFP_KERNEL)))
+			return -ENOMEM;
+	}
+
+	if (copy_from_user(name, buf, count)) {
+		ret = -EFAULT;
+		goto done;
+	}
+
+	value = name;
+	name = strsep(&value, "=");
+	if (value)
+		ret = nvram_set(name, value) ? : count;
+	else
+		ret = nvram_unset(name) ? : count;
+
+ done:
+	if (name != tmp)
+		kfree(name);
+
+	return ret;
+}	
+
+static int
+dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	if (cmd != NVRAM_MAGIC)
+		return -EINVAL;
+	return nvram_commit();
+}
+
+static int
+dev_nvram_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	unsigned long offset = virt_to_phys(nvram_buf);
+
+	if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start,
+			     vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int
+dev_nvram_open(struct inode *inode, struct file * file)
+{
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+static int
+dev_nvram_release(struct inode *inode, struct file * file)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+static struct file_operations dev_nvram_fops = {
+	owner:		THIS_MODULE,
+	open:		dev_nvram_open,
+	release:	dev_nvram_release,
+	read:		dev_nvram_read,
+	write:		dev_nvram_write,
+	ioctl:		dev_nvram_ioctl,
+	mmap:		dev_nvram_mmap,
+};
+
+static void
+dev_nvram_exit(void)
+{
+	int order = 0;
+	struct page *page, *end;
+
+	if (nvram_handle)
+		devfs_unregister(nvram_handle);
+
+	if (nvram_major >= 0)
+		devfs_unregister_chrdev(nvram_major, "nvram");
+
+	if (nvram_mtd)
+		put_mtd_device(nvram_mtd);
+
+	while ((PAGE_SIZE << order) < NVRAM_SPACE)
+		order++;
+	end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
+	for (page = virt_to_page(nvram_buf); page <= end; page++)
+		mem_map_unreserve(page);
+
+	_nvram_exit();
+}
+
+static int __init
+dev_nvram_init(void)
+{
+	int order = 0, ret = 0;
+	struct page *page, *end;
+	unsigned int i;
+
+	/* Allocate and reserve memory to mmap() */
+	while ((PAGE_SIZE << order) < NVRAM_SPACE)
+		order++;
+	end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1);
+	for (page = virt_to_page(nvram_buf); page <= end; page++)
+		mem_map_reserve(page);
+
+#ifdef CONFIG_MTD
+	/* Find associated MTD device */
+	for (i = 0; i < MAX_MTD_DEVICES; i++) {
+		nvram_mtd = get_mtd_device(NULL, i);
+		if (nvram_mtd) {
+			if (!strcmp(nvram_mtd->name, "nvram") &&
+			    nvram_mtd->size >= NVRAM_SPACE)
+				break;
+			put_mtd_device(nvram_mtd);
+		}
+	}
+	if (i >= MAX_MTD_DEVICES)
+		nvram_mtd = NULL;
+#endif
+
+	/* Initialize hash table lock */
+	spin_lock_init(&nvram_lock);
+
+	/* Initialize commit semaphore */
+	init_MUTEX(&nvram_sem);
+
+	/* Register char device */
+	if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) {
+		ret = nvram_major;
+		goto err;
+	}
+
+	/* Initialize hash table */
+	_nvram_init();
+
+	/* Create /dev/nvram handle */
+	nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0,
+				      S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL);
+
+	/* Set the SDRAM NCDL value into NVRAM if not already done */
+	if (getintvar(NULL, "sdram_ncdl") == 0) {
+		unsigned int ncdl;
+		char buf[] = "0x00000000";
+
+		if ((ncdl = sb_memc_get_ncdl(sbh))) {
+			sprintf(buf, "0x%08x", ncdl);
+			nvram_set("sdram_ncdl", buf);
+			nvram_commit();
+		}
+	}
+
+	return 0;
+
+ err:
+	dev_nvram_exit();
+	return ret;
+}
+
+module_init(dev_nvram_init);
+module_exit(dev_nvram_exit);
diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
--- linux.old/arch/mips/bcm947xx/pcibios.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/pcibios.c	2005-11-07 23:59:38.908750500 +0100
@@ -0,0 +1,355 @@
+/*
+ * Low-Level PCI and SB support for BCM47xx (Linux support code)
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$ 
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/paccess.h>
+
+#include <typedefs.h>
+#include <bcmutils.h>
+#include <sbconfig.h>
+#include <sbutils.h>
+#include <sbpci.h>
+#include <pcicfg.h>
+#include <bcmdevs.h>
+#include <bcmnvram.h>
+
+/* Global SB handle */
+extern sb_t *bcm947xx_sbh;
+extern spinlock_t bcm947xx_sbh_lock;
+
+/* Convenience */
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+
+static int
+sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int
+sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int
+sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int
+sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int
+sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int
+sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value));
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pcibios_ops = {
+	sbpci_read_config_byte,
+	sbpci_read_config_word,
+	sbpci_read_config_dword,
+	sbpci_write_config_byte,
+	sbpci_write_config_word,
+	sbpci_write_config_dword
+};
+
+
+void __init
+pcibios_init(void)
+{
+	ulong flags;
+
+	if (!(sbh = sb_kattach()))
+		panic("sb_kattach failed");
+	spin_lock_init(&sbh_lock);
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	sbpci_init(sbh);
+	spin_unlock_irqrestore(&sbh_lock, flags);
+
+	set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
+
+	mdelay(300); //By Joey for Atheros Card
+
+	/* Scan the SB bus */
+	pci_scan_bus(0, &pcibios_ops, NULL);
+
+}
+
+char * __init
+pcibios_setup(char *str)
+{
+	if (!strncmp(str, "ban=", 4)) {
+		sbpci_ban(simple_strtoul(str + 4, NULL, 0));
+		return NULL;
+	}
+
+	return (str);
+}
+
+static u32 pci_iobase = 0x100;
+static u32 pci_membase = SB_PCI_DMA;
+
+void __init
+pcibios_fixup_bus(struct pci_bus *b)
+{
+	struct list_head *ln;
+	struct pci_dev *d;
+	struct resource *res;
+	int pos, size;
+	u32 *base;
+	u8 irq;
+
+       	printk("PCI: Fixing up bus %d\n", b->number);
+
+	/* Fix up SB */
+	if (b->number == 0) {
+		for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
+			d = pci_dev_b(ln);
+			/* Fix up interrupt lines */
+			pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
+			d->irq = irq + 2;
+			pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+		}
+	}
+
+	/* Fix up external PCI */
+	else {
+		for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
+			d = pci_dev_b(ln);
+			/* Fix up resource bases */
+			for (pos = 0; pos < 6; pos++) {
+				res = &d->resource[pos];
+				base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
+				if (res->end) {
+					size = res->end - res->start + 1;
+ 					if (*base & (size - 1))
+ 						*base = (*base + size) & ~(size - 1);
+ 					res->start = *base;
+ 					res->end = res->start + size - 1;
+ 					*base += size;
+					pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+				}
+				/* Fix up PCI bridge BAR0 only */
+				if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
+					break;
+			}
+			/* Fix up interrupt lines */
+			if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
+				d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
+			pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+		}
+	}
+}
+
+unsigned int
+pcibios_assign_all_busses(void)
+{
+	return 1;
+}
+
+void
+pcibios_align_resource(void *data, struct resource *res,
+		       unsigned long size, unsigned long align)
+{
+}
+
+int
+pcibios_enable_resources(struct pci_dev *dev)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	/* External PCI only */
+	if (dev->bus->number == 0)
+		return 0;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for(idx=0; idx<6; idx++) {
+		r = &dev->resource[idx];
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int
+pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	ulong flags;
+	uint coreidx;
+
+	/* External PCI device enable */
+	if (dev->bus->number != 0)
+		return pcibios_enable_resources(dev);
+
+	/* These cores come out of reset enabled */
+	if (dev->device == SB_MIPS ||
+	    dev->device == SB_MIPS33 ||
+	    dev->device == SB_EXTIF ||
+	    dev->device == SB_CC)
+		return 0;
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	coreidx = sb_coreidx(sbh);
+	if (!sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* 
+	 * The USB core requires a special bit to be set during core
+	 * reset to enable host (OHCI) mode. Resetting the SB core in
+	 * pcibios_enable_device() is a hack for compatibility with
+	 * vanilla usb-ohci so that it does not have to know about
+	 * SB. A driver that wants to use the USB core in device mode
+	 * should know about SB and should reset the bit back to 0
+	 * after calling pcibios_enable_device().
+	 */
+	if (sb_coreid(sbh) == SB_USB) {
+		sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
+		sb_core_reset(sbh, 1 << 29);
+	} else
+		sb_core_reset(sbh, 0);
+
+	sb_setcoreidx(sbh, coreidx);
+	spin_unlock_irqrestore(&sbh_lock, flags);
+	
+	return 0;
+}
+
+void
+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
+			struct resource *res, int resource)
+{
+	unsigned long where, size;
+	u32 reg;
+
+	/* External PCI only */
+	if (dev->bus->number == 0)
+		return;
+
+	where = PCI_BASE_ADDRESS_0 + (resource * 4);
+	size = res->end - res->start;
+	pci_read_config_dword(dev, where, &reg);
+	reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
+	pci_write_config_dword(dev, where, reg);
+}
+
+static void __init
+quirk_sbpci_bridge(struct pci_dev *dev)
+{
+	if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
+		return;
+
+	printk("PCI: Fixing up bridge\n");
+
+	/* Enable PCI bridge bus mastering and memory space */
+	pci_set_master(dev);
+	pcibios_enable_resources(dev);
+
+	/* Enable PCI bridge BAR1 prefetch and burst */
+	pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
+}	
+
+struct pci_fixup pcibios_fixups[] = {
+	{ PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
+	{ 0 }
+};
+
+/*
+ *  If we set up a device for bus mastering, we need to check the latency
+ *  timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	if (lat < 16)
+		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+	else if (lat > pcibios_max_latency)
+		lat = pcibios_max_latency;
+	else
+		return;
+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
--- linux.old/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/prom.c	2005-11-07 21:57:07.885588250 +0100
@@ -0,0 +1,41 @@
+/*
+ * Early initialization code for BCM94710 boards
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/bootinfo.h>
+
+void __init
+prom_init(int argc, const char **argv)
+{
+	unsigned long mem;
+
+        mips_machgroup = MACH_GROUP_BRCM;
+        mips_machtype = MACH_BCM947XX;
+
+	/* Figure out memory size by finding aliases */
+	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
+		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
+		    *(unsigned long *)(prom_init))
+			break;
+	}
+	add_memory_region(0, mem, BOOT_MEM_RAM);
+}
+
+void __init
+prom_free_prom_memory(void)
+{
+}
diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c
--- linux.old/arch/mips/bcm947xx/sbmips.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/sbmips.c	2005-11-07 23:55:45.682174750 +0100
@@ -0,0 +1,1038 @@
+/*
+ * BCM47XX Sonics SiliconBackplane MIPS core routines
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <bcmdevs.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+#include <hndmips.h>
+#include <sbconfig.h>
+#include <sbextif.h>
+#include <sbchipc.h>
+#include <sbmemc.h>
+#include <mipsinc.h>
+#include <sbutils.h>
+
+/*
+ * Returns TRUE if an external UART exists at the given base
+ * register.
+ */
+static bool
+BCMINITFN(serial_exists)(uint8 *regs)
+{
+	uint8 save_mcr, status1;
+
+	save_mcr = R_REG(&regs[UART_MCR]);
+	W_REG(&regs[UART_MCR], UART_MCR_LOOP | 0x0a);
+	status1 = R_REG(&regs[UART_MSR]) & 0xf0;
+	W_REG(&regs[UART_MCR], save_mcr);
+
+	return (status1 == 0x90);
+}
+
+/*
+ * Initializes UART access. The callback function will be called once
+ * per found UART.
+ */
+void
+BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
+{
+	void *regs;
+	ulong base;
+	uint irq;
+	int i, n;
+
+	if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
+		extifregs_t *eir = (extifregs_t *) regs;
+		sbconfig_t *sb;
+
+		/* Determine external UART register base */
+		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
+		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
+
+		/* Determine IRQ */
+		irq = sb_irq(sbh);
+
+		/* Disable GPIO interrupt initially */
+		W_REG(&eir->gpiointpolarity, 0);
+		W_REG(&eir->gpiointmask, 0);
+
+		/* Search for external UARTs */
+		n = 2;
+		for (i = 0; i < 2; i++) {
+			regs = (void *) REG_MAP(base + (i * 8), 8);
+			if (BCMINIT(serial_exists)(regs)) {
+				/* Set GPIO 1 to be the external UART IRQ */
+				W_REG(&eir->gpiointmask, 2);
+				if (add)
+					add(regs, irq, 13500000, 0);
+			}
+		}
+
+		/* Add internal UART if enabled */
+		if (R_REG(&eir->corecontrol) & CC_UE)
+			if (add)
+				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
+	} else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
+		chipcregs_t *cc = (chipcregs_t *) regs;
+		uint32 rev, cap, pll, baud_base, div;
+
+		/* Determine core revision and capabilities */
+		rev = sb_corerev(sbh);
+		cap = R_REG(&cc->capabilities);
+		pll = cap & CAP_PLL_MASK;
+
+		/* Determine IRQ */
+		irq = sb_irq(sbh);
+
+		if (pll == PLL_TYPE1) {
+			/* PLL clock */
+			baud_base = sb_clock_rate(pll,
+						  R_REG(&cc->clockcontrol_n),
+						  R_REG(&cc->clockcontrol_m2));
+			div = 1;
+		} else {
+			if (rev >= 11) {
+				/* Fixed ALP clock */
+				baud_base = 20000000;
+				div = 1;
+				/* Set the override bit so we don't divide it */
+				W_REG(&cc->corecontrol, CC_UARTCLKO);
+			} else if (rev >= 3) {
+				/* Internal backplane clock */
+				baud_base = sb_clock(sbh);
+				div = 2;	/* Minimum divisor */
+				W_REG(&cc->clkdiv,
+				      ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div));
+			} else {
+				/* Fixed internal backplane clock */
+				baud_base = 88000000;
+				div = 48;
+			}
+
+			/* Clock source depends on strapping if UartClkOverride is unset */
+			if ((rev > 0) &&
+			    ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
+				if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
+					/* Internal divided backplane clock */
+					baud_base /= div;
+				} else {
+					/* Assume external clock of 1.8432 MHz */
+					baud_base = 1843200;
+				}
+			}
+		}
+
+		/* Add internal UARTs */
+		n = cap & CAP_UARTS_MASK;
+		for (i = 0; i < n; i++) {
+			/* Register offset changed after revision 0 */
+			if (rev)
+				regs = (void *)((ulong) &cc->uart0data + (i * 256));
+			else
+				regs = (void *)((ulong) &cc->uart0data + (i * 8));
+
+			if (add)
+				add(regs, irq, baud_base, 0);
+		}
+	}
+}
+
+/*
+ * Initialize jtag master and return handle for
+ * jtag_rwreg. Returns NULL on failure.
+ */
+void *
+sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap)
+{
+	void *regs;
+
+	if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) {
+		chipcregs_t *cc = (chipcregs_t *) regs;
+		uint32 tmp;
+
+		/*
+		 * Determine jtagm availability from
+		 * core revision and capabilities.
+		 */
+		tmp = sb_corerev(sbh);
+		/*
+		 * Corerev 10 has jtagm, but the only chip
+		 * with it does not have a mips, and
+		 * the layout of the jtagcmd register is
+		 * different. We'll only accept >= 11.
+		 */
+		if (tmp < 11)
+			return (NULL);
+
+		tmp = R_REG(&cc->capabilities);
+		if ((tmp & CAP_JTAGP) == 0)
+			return (NULL);
+
+		/* Set clock divider if requested */
+		if (clkd != 0) {
+			tmp = R_REG(&cc->clkdiv);
+			tmp = (tmp & ~CLKD_JTAG) |
+				((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG);
+			W_REG(&cc->clkdiv, tmp);
+		}
+
+		/* Enable jtagm */
+		tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0);
+		W_REG(&cc->jtagctrl, tmp);
+	}
+
+	return (regs);
+}
+
+void
+sb_jtagm_disable(void *h)
+{
+	chipcregs_t *cc = (chipcregs_t *)h;
+
+	W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN);
+}
+
+/*
+ * Read/write a jtag register. Assumes a target with
+ * 8 bit IR and 32 bit DR.
+ */
+#define	IRWIDTH		8
+#define	DRWIDTH		32
+uint32
+jtag_rwreg(void *h, uint32 ir, uint32 dr)
+{
+	chipcregs_t *cc = (chipcregs_t *) h;
+	uint32 tmp;
+
+	W_REG(&cc->jtagir, ir);
+	W_REG(&cc->jtagdr, dr);
+	tmp = JCMD_START | JCMD_ACC_IRDR |
+		((IRWIDTH - 1) << JCMD_IRW_SHIFT) |
+		(DRWIDTH - 1);
+	W_REG(&cc->jtagcmd, tmp);
+	while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) {
+		/* OSL_DELAY(1); */
+	}
+
+	tmp = R_REG(&cc->jtagdr);
+	return (tmp);
+}
+
+/* Returns the SB interrupt flag of the current core. */
+uint32
+sb_flag(sb_t *sbh)
+{
+	void *regs;
+	sbconfig_t *sb;
+
+	regs = sb_coreregs(sbh);
+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+	return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
+}
+
+static const uint32 sbips_int_mask[] = {
+	0,
+	SBIPS_INT1_MASK,
+	SBIPS_INT2_MASK,
+	SBIPS_INT3_MASK,
+	SBIPS_INT4_MASK
+};
+
+static const uint32 sbips_int_shift[] = {
+	0,
+	0,
+	SBIPS_INT2_SHIFT,
+	SBIPS_INT3_SHIFT,
+	SBIPS_INT4_SHIFT
+};
+
+/*
+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
+ * 0 is returned.
+ */
+uint
+sb_irq(sb_t *sbh)
+{
+	uint idx;
+	void *regs;
+	sbconfig_t *sb;
+	uint32 flag, sbipsflag;
+	uint irq = 0;
+
+	flag = sb_flag(sbh);
+
+	idx = sb_coreidx(sbh);
+
+	if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
+	    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+		/* sbipsflag specifies which core is routed to interrupts 1 to 4 */
+		sbipsflag = R_REG(&sb->sbipsflag);
+		for (irq = 1; irq <= 4; irq++) {
+			if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
+				break;
+		}
+		if (irq == 5)
+			irq = 0;
+	}
+
+	sb_setcoreidx(sbh, idx);
+
+	return irq;
+}
+
+/* Clears the specified MIPS IRQ. */
+static void
+BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq)
+{
+	void *regs;
+	sbconfig_t *sb;
+
+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
+		ASSERT(regs);
+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+	if (irq == 0)
+		W_REG(&sb->sbintvec, 0);
+	else
+		OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
+}
+
+/*
+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
+ * IRQ 0 may be assigned more than once.
+ */
+static void
+BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit)
+{
+	void *regs;
+	sbconfig_t *sb;
+	uint32 flag;
+
+	regs = sb_setcore(sbh, coreid, coreunit);
+	ASSERT(regs);
+	flag = sb_flag(sbh);
+
+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
+		ASSERT(regs);
+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+	if (irq == 0)
+		OR_REG(&sb->sbintvec, 1 << flag);
+	else {
+		flag <<= sbips_int_shift[irq];
+		ASSERT(!(flag & ~sbips_int_mask[irq]));
+		flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
+		W_REG(&sb->sbipsflag, flag);
+	}
+}
+
+/*
+ * Initializes clocks and interrupts. SB and NVRAM access must be
+ * initialized prior to calling.
+ */
+void
+BCMINITFN(sb_mips_init)(sb_t *sbh)
+{
+	ulong hz, ns, tmp;
+	extifregs_t *eir;
+	chipcregs_t *cc;
+	char *value;
+	uint irq;
+
+	/* Figure out current SB clock speed */
+	if ((hz = sb_clock(sbh)) == 0)
+		hz = 100000000;
+	ns = 1000000000 / hz;
+
+	/* Setup external interface timing */
+	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
+		/* Initialize extif so we can get to the LEDs and external UART */
+		W_REG(&eir->prog_config, CF_EN);
+
+		/* Set timing for the flash */
+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
+
+		/* Set programmable interface timing for external uart */
+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
+		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
+	} else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
+		/* Set timing for the flash */
+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+		tmp |= CEIL(10, ns) << FW_W1_SHIFT;	/* W1 = 10nS */
+		tmp |= CEIL(120, ns);			/* W0 = 120nS */
+		
+		// Added by Chen-I for 5365
+		if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+		{
+			W_REG(&cc->flash_waitcount, tmp);
+			W_REG(&cc->pcmcia_memwait, tmp);
+		}
+		else
+		{
+			if (sb_corerev(sbh) < 9)
+				W_REG(&cc->flash_waitcount, tmp);
+
+			if ((sb_corerev(sbh) < 9) ||
+		   	 ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) {
+				W_REG(&cc->pcmcia_memwait, tmp);
+			}
+		}
+	}
+
+	/* Chip specific initialization */
+	switch (BCMINIT(sb_chip)(sbh)) {
+	case BCM4710_DEVICE_ID:
+		/* Clear interrupt map */
+		for (irq = 0; irq <= 4; irq++)
+			BCMINIT(sb_clearirq)(sbh, irq);
+		BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0);
+		BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0);
+		BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1);
+		BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0);
+		BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0);
+		ASSERT(eir);
+		value = BCMINIT(nvram_get)("et0phyaddr");
+		if (value && !strcmp(value, "31")) {
+			/* Enable internal UART */
+			W_REG(&eir->corecontrol, CC_UE);
+			/* Give USB its own interrupt */
+			BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0);
+		} else {
+			/* Disable internal UART */
+			W_REG(&eir->corecontrol, 0);
+			/* Give Ethernet its own interrupt */
+			BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0);
+			BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0);
+		}
+		break;
+	case BCM5350_DEVICE_ID:
+		/* Clear interrupt map */
+		for (irq = 0; irq <= 4; irq++)
+			BCMINIT(sb_clearirq)(sbh, irq);
+		BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0);
+		BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0);
+		BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0);
+		BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0);
+		BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0);
+		break;
+	}
+}
+
+uint32
+BCMINITFN(sb_mips_clock)(sb_t *sbh)
+{
+	extifregs_t *eir;
+	chipcregs_t *cc;
+	uint32 n, m;
+	uint idx;
+	uint32 pll_type, rate = 0;
+
+	/* get index of the current core */
+	idx = sb_coreidx(sbh);
+	pll_type = PLL_TYPE1;
+
+	/* switch to extif or chipc core */
+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
+		n = R_REG(&eir->clockcontrol_n);
+		m = R_REG(&eir->clockcontrol_sb);
+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
+		n = R_REG(&cc->clockcontrol_n);
+		if ((pll_type == PLL_TYPE2) ||
+		    (pll_type == PLL_TYPE4) ||
+		    (pll_type == PLL_TYPE6) ||
+		    (pll_type == PLL_TYPE7))
+			m = R_REG(&cc->clockcontrol_mips);
+		else if (pll_type == PLL_TYPE5) {
+			rate = 200000000;
+			goto out;
+		}
+		else if (pll_type == PLL_TYPE3) {
+			if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */
+				rate = 200000000;
+				goto out;
+			} else
+				m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */
+		} else
+			m = R_REG(&cc->clockcontrol_sb);
+	} else
+		goto out;
+
+	// Added by Chen-I for 5365 
+	if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+		rate = 100000000;
+	else
+		/* calculate rate */
+		rate = sb_clock_rate(pll_type, n, m);
+
+	if (pll_type == PLL_TYPE6)
+		rate = SB2MIPS_T6(rate);
+
+out:
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	return rate;
+}
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+
+static void
+BCMINITFN(handler)(void)
+{
+	/* Step 11 */
+	__asm__ (
+		".set\tmips32\n\t"
+		"ssnop\n\t"
+		"ssnop\n\t"
+	/* Disable interrupts */
+	/*	MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
+		"mfc0 $15, $12\n\t"
+	/* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */
+		"li $14, -31746\n\t"
+		"and $15, $15, $14\n\t"
+		"mtc0 $15, $12\n\t"
+		"eret\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		".set\tmips0"
+	);
+}
+
+/* The following MUST come right after handler() */
+static void
+BCMINITFN(afterhandler)(void)
+{
+}
+
+/*
+ * Set the MIPS, backplane and PCI clocks as closely as possible.
+ */
+bool
+BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
+{
+	extifregs_t *eir = NULL;
+	chipcregs_t *cc = NULL;
+	mipsregs_t *mipsr = NULL;
+	volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2;
+	uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg;
+	uint32 pll_type, sync_mode;
+	uint ic_size, ic_lsize;
+	uint idx, i;
+	typedef struct {
+		uint32 mipsclock;
+		uint16 n;
+		uint32 sb;
+		uint32 pci33;
+		uint32 pci25;
+	} n3m_table_t;
+	static n3m_table_t BCMINITDATA(type1_table)[] = {
+		{  96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /*  96.000 32.000 24.000 */
+		{ 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
+		{ 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
+		{ 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
+		{ 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
+		{ 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
+		{ 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
+		{ 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
+		{ 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
+		{ 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
+		{ 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
+		{ 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
+		{ 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
+		{ 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
+		{ 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
+		{ 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
+		{ 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
+		{ 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
+		{ 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
+		{ 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
+	};
+	typedef struct {
+		uint32 mipsclock;
+		uint16 n;
+		uint32 m2; /* that is the clockcontrol_m2 */
+	} type3_table_t;
+	static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */
+		{ 150000000, 0x311, 0x4020005 },
+		{ 200000000, 0x311, 0x4020003 },
+	};
+	typedef struct {
+		uint32 mipsclock;
+		uint32 sbclock;
+		uint16 n;
+		uint32 sb;
+		uint32 pci33;
+		uint32 m2;
+		uint32 m3;
+		uint32 ratio_cfg;
+		uint32 ratio_parm;
+	} n4m_table_t;
+
+	static n4m_table_t BCMINITDATA(type2_table)[] = {
+		{ 180000000,  80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100,	 8, 0x012a00a9 },
+		{ 180000000,  90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 },
+		{ 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 },
+		{ 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
+		{ 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
+		{ 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
+		{ 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100,  8, 0x012a00a9 },
+		{ 240000000, 120000000,	0x0803,	0x01000200, 0x01020600,	0x01000200, 0x05000200, 11, 0x0aaa0555 },
+		{ 252000000, 126000000,	0x0504,	0x01000100, 0x01020500,	0x01000100, 0x05000100, 11, 0x0aaa0555 },
+		{ 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
+		{ 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
+		{ 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
+		{ 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
+		{ 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100,  8, 0x012a00a9 },
+		{ 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
+		{ 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100,  8, 0x012a00a9 },
+		{ 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 }
+	};
+
+	static n4m_table_t BCMINITDATA(type4_table)[] = {
+		{ 192000000,  96000000, 0x0702,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
+		{ 198000000,  99000000, 0x0603,	0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 200000000, 100000000, 0x0009,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
+		{ 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
+		{ 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
+		{ 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005,  8, 0x012a00a9 },
+		{ 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 240000000, 102857143,	0x0109,	0x04000021, 0x01050203,	0x11030021, 0x04000003, 13, 0x254a14a9 },
+		{ 240000000, 120000000,	0x0109,	0x11030002, 0x01050203,	0x11030002, 0x04000003, 11, 0x0aaa0555 },
+		{ 252000000, 100800000,	0x0203,	0x04000009, 0x11050005,	0x02000209, 0x04000002,  9, 0x02520129 },
+		{ 252000000, 126000000,	0x0203,	0x04000005, 0x11050005,	0x04000005, 0x04000002, 11, 0x0aaa0555 },
+		{ 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 },
+		{ 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 },
+		{ 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
+		{ 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
+		{ 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002,  9, 0x02520129 },
+		{ 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 }
+	};
+
+	static n4m_table_t BCMINITDATA(type7_table)[] = {
+		{ 183333333,  91666666, 0x0605,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
+		{ 187500000,  93750000, 0x0a03,	0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
+		{ 196875000,  98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 },
+		{ 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
+		{ 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 212500000, 106250000,	0x0c05,	0x11020005, 0x01030303,	0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 215625000, 107812500,	0x1203,	0x11090009, 0x11050005,	0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
+		{ 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
+		{ 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
+		{ 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
+		{ 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 },
+		{ 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 }
+	};
+
+	ulong start, end, dst;
+	bool ret = FALSE;
+
+	/* get index of the current core */
+	idx = sb_coreidx(sbh);
+	clockcontrol_m2 = NULL;
+
+	/* switch to extif or chipc core */
+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
+		pll_type = PLL_TYPE1;
+		clockcontrol_n = &eir->clockcontrol_n;
+		clockcontrol_sb = &eir->clockcontrol_sb;
+		clockcontrol_pci = &eir->clockcontrol_pci;
+		clockcontrol_m2 = &cc->clockcontrol_m2;
+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
+		if (pll_type == PLL_TYPE6) {
+			clockcontrol_n = NULL;
+			clockcontrol_sb = NULL;
+			clockcontrol_pci = NULL;
+		} else {
+			clockcontrol_n = &cc->clockcontrol_n;
+			clockcontrol_sb = &cc->clockcontrol_sb;
+			clockcontrol_pci = &cc->clockcontrol_pci;
+			clockcontrol_m2 = &cc->clockcontrol_m2;
+		}
+	} else
+		goto done;
+
+	if (pll_type == PLL_TYPE6) {
+		/* Silence compilers */
+		orig_n = orig_sb = orig_pci = 0;
+	} else {
+		/* Store the current clock register values */
+		orig_n = R_REG(clockcontrol_n);
+		orig_sb = R_REG(clockcontrol_sb);
+		orig_pci = R_REG(clockcontrol_pci);
+	}
+
+	if (pll_type == PLL_TYPE1) {
+		/* Keep the current PCI clock if not specified */
+		if (pciclock == 0) {
+			pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
+			pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
+		}
+
+		/* Search for the closest MIPS clock less than or equal to a preferred value */
+		for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) {
+			ASSERT(BCMINIT(type1_table)[i].mipsclock ==
+			       sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb));
+			if (BCMINIT(type1_table)[i].mipsclock > mipsclock)
+				break;
+		}
+		if (i == 0) {
+			ret = FALSE;
+			goto done;
+		} else {
+			ret = TRUE;
+			i--;
+		}
+		ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock);
+
+		/* No PLL change */
+		if ((orig_n == BCMINIT(type1_table)[i].n) &&
+		    (orig_sb == BCMINIT(type1_table)[i].sb) &&
+		    (orig_pci == BCMINIT(type1_table)[i].pci33))
+			goto done;
+
+		/* Set the PLL controls */
+		W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n);
+		W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb);
+		if (pciclock == 25000000)
+			W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25);
+		else
+			W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33);
+
+		/* Reset */
+		sb_watchdog(sbh, 1);
+
+		while (1);
+	} else if ((pll_type == PLL_TYPE3) &&
+		   (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) {
+		/* 5350 */
+		/* Search for the closest MIPS clock less than or equal to a preferred value */
+
+		for (i = 0; i < ARRAYSIZE(type3_table); i++) {
+			if (type3_table[i].mipsclock > mipsclock)
+				break;
+		}
+		if (i == 0) {
+			ret = FALSE;
+			goto done;
+		} else {
+			ret = TRUE;
+			i--;
+		}
+		ASSERT(type3_table[i].mipsclock <= mipsclock);
+
+		/* No PLL change */
+		orig_m2 = R_REG(&cc->clockcontrol_m2);
+		if ((orig_n == type3_table[i].n) &&
+		    (orig_m2 == type3_table[i].m2)) {
+			goto done;
+		}
+
+		/* Set the PLL controls */
+		W_REG(clockcontrol_n, type3_table[i].n);
+		W_REG(clockcontrol_m2, type3_table[i].m2);
+
+		/* Reset */
+		sb_watchdog(sbh, 1);
+		while (1);
+	} else if ((pll_type == PLL_TYPE2) ||
+		   (pll_type == PLL_TYPE4) ||
+		   (pll_type == PLL_TYPE6) ||
+		   (pll_type == PLL_TYPE7)) {
+		n4m_table_t *table = NULL, *te;
+		uint tabsz = 0;
+
+		ASSERT(cc);
+
+		orig_mips = R_REG(&cc->clockcontrol_mips);
+
+		if (pll_type == PLL_TYPE6) {
+			uint32 new_mips = 0;
+
+			ret = TRUE;
+			if (mipsclock <= SB2MIPS_T6(CC_T6_M1))
+				new_mips = CC_T6_MMASK;
+
+			if (orig_mips == new_mips)
+				goto done;
+
+			W_REG(&cc->clockcontrol_mips, new_mips);
+			goto end_fill;
+		}
+
+		if (pll_type == PLL_TYPE2) {
+			table = BCMINIT(type2_table);
+			tabsz = ARRAYSIZE(BCMINIT(type2_table));
+		} else if (pll_type == PLL_TYPE4) {
+			table = BCMINIT(type4_table);
+			tabsz = ARRAYSIZE(BCMINIT(type4_table));
+		} else if (pll_type == PLL_TYPE7) {
+			table = BCMINIT(type7_table);
+			tabsz = ARRAYSIZE(BCMINIT(type7_table));
+		} else
+			ASSERT("No table for plltype" == NULL);
+
+		/* Store the current clock register values */
+		orig_m2 = R_REG(&cc->clockcontrol_m2);
+		orig_ratio_parm = 0;
+		orig_ratio_cfg = 0;
+
+		/* Look up current ratio */
+		for (i = 0; i < tabsz; i++) {
+			if ((orig_n == table[i].n) &&
+			    (orig_sb == table[i].sb) &&
+			    (orig_pci == table[i].pci33) &&
+			    (orig_m2 == table[i].m2) &&
+			    (orig_mips == table[i].m3)) {
+				orig_ratio_parm = table[i].ratio_parm;
+				orig_ratio_cfg = table[i].ratio_cfg;
+				break;
+			}
+		}
+
+		/* Search for the closest MIPS clock greater or equal to a preferred value */
+		for (i = 0; i < tabsz; i++) {
+			ASSERT(table[i].mipsclock ==
+			       sb_clock_rate(pll_type, table[i].n, table[i].m3));
+			if ((mipsclock <= table[i].mipsclock) &&
+			    ((sbclock == 0) || (sbclock <= table[i].sbclock)))
+				break;
+		}
+		if (i == tabsz) {
+			ret = FALSE;
+			goto done;
+		} else {
+			te = &table[i];
+			ret = TRUE;
+		}
+
+		/* No PLL change */
+		if ((orig_n == te->n) &&
+		    (orig_sb == te->sb) &&
+		    (orig_pci == te->pci33) &&
+		    (orig_m2 == te->m2) &&
+		    (orig_mips == te->m3))
+			goto done;
+
+		/* Set the PLL controls */
+		W_REG(clockcontrol_n, te->n);
+		W_REG(clockcontrol_sb, te->sb);
+		W_REG(clockcontrol_pci, te->pci33);
+		W_REG(&cc->clockcontrol_m2, te->m2);
+		W_REG(&cc->clockcontrol_mips, te->m3);
+
+		/* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
+		if ((pll_type == PLL_TYPE7) &&
+		    (te->sb != te->m2) &&
+		    (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
+			W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100);
+
+		/* No ratio change */
+		if (orig_ratio_parm == te->ratio_parm)
+			goto end_fill;
+
+		icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
+
+		/* Preload the code into the cache */
+		start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
+		end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
+		while (start < end) {
+			cache_op(start, Fill_I);
+			start += ic_lsize;
+		}
+
+		/* Copy the handler */
+		start = (ulong) &BCMINIT(handler);
+		end = (ulong) &BCMINIT(afterhandler);
+		dst = KSEG1ADDR(0x180);
+		for (i = 0; i < (end - start); i += 4)
+			*((ulong *)(dst + i)) = *((ulong *)(start + i));
+
+		/* Preload handler into the cache one line at a time */
+		for (i = 0; i < (end - start); i += 4)
+			cache_op(dst + i, Fill_I);
+
+		/* Clear BEV bit */
+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
+
+		/* Enable interrupts */
+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
+
+		/* Enable MIPS timer interrupt */
+		if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
+		    !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
+			ASSERT(mipsr);
+		W_REG(&mipsr->intmask, 1);
+
+	start_fill:
+		/* step 1, set clock ratios */
+		MTC0(C0_BROADCOM, 3, te->ratio_parm);
+		MTC0(C0_BROADCOM, 1, te->ratio_cfg);
+
+		/* step 2: program timer intr */
+		W_REG(&mipsr->timer, 100);
+		(void) R_REG(&mipsr->timer);
+
+		/* step 3, switch to async */
+		sync_mode = MFC0(C0_BROADCOM, 4);
+		MTC0(C0_BROADCOM, 4, 1 << 22);
+
+		/* step 4, set cfg active */
+		MTC0(C0_BROADCOM, 2, 0x9);
+
+
+		/* steps 5 & 6 */
+		__asm__ __volatile__ (
+			".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0"
+		);
+
+		/* step 7, clear cfg_active */
+		MTC0(C0_BROADCOM, 2, 0);
+
+		/* Additional Step: set back to orig sync mode */
+		MTC0(C0_BROADCOM, 4, sync_mode);
+
+		/* step 8, fake soft reset */
+		MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
+
+	end_fill:
+		/* step 9 set watchdog timer */
+		sb_watchdog(sbh, 20);
+		(void) R_REG(&cc->chipid);
+
+		/* step 11 */
+		__asm__ __volatile__ (
+			".set\tmips3\n\t"
+			"sync\n\t"
+			"wait\n\t"
+			".set\tmips0"
+		);
+		while (1);
+	}
+
+done:
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	return ret;
+}
+
+/*
+ *  This also must be run from the cache on 47xx
+ *  so there are no mips core BIU ops in progress
+ *  when the PFC is enabled.
+ */
+
+static void
+BCMINITFN(_enable_pfc)(uint32 mode)
+{
+	/* write range */
+	*(volatile uint32 *)PFC_CR1 = 0xffff0000;
+
+	/* enable */
+	*(volatile uint32 *)PFC_CR0 = mode;
+}
+
+void
+BCMINITFN(enable_pfc)(uint32 mode)
+{
+	ulong start, end;
+	int i;
+
+	/* If auto then choose the correct mode for this
+	   platform, currently we only ever select one mode */
+	if (mode == PFC_AUTO)
+		mode = PFC_INST;
+
+	/* enable prefetch cache if available */
+	if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
+		start = (ulong) &BCMINIT(_enable_pfc);
+		end = (ulong) &BCMINIT(enable_pfc);
+
+		/* Preload handler into the cache one line at a time */
+		for (i = 0; i < (end - start); i += 4)
+			cache_op(start + i, Fill_I);
+
+		BCMINIT(_enable_pfc)(mode);
+	}
+}
+
+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
+uint32
+BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh)
+{
+	sbmemcregs_t *memc;
+	uint32 ret = 0;
+	uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
+	uint idx, rev;
+
+	idx = sb_coreidx(sbh);
+
+	memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
+	if (memc == 0)
+		goto out;
+
+	rev = sb_corerev(sbh);
+
+	config = R_REG(&memc->config);
+	wr = R_REG(&memc->wrncdlcor);
+	rd = R_REG(&memc->rdncdlcor);
+	misc = R_REG(&memc->miscdlyctl);
+	dqsg = R_REG(&memc->dqsgatencdl);
+
+	rd &= MEMC_RDNCDLCOR_RD_MASK;
+	wr &= MEMC_WRNCDLCOR_WR_MASK;
+	dqsg &= MEMC_DQSGATENCDL_G_MASK;
+
+	if (config & MEMC_CONFIG_DDR) {
+		ret = (wr << 16) | (rd << 8) | dqsg;
+	} else {
+		if (rev > 0)
+			cd = rd;
+		else
+			cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
+		sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
+		sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
+		ret = (sm << 16) | (sd << 8) | cd;
+	}
+
+out:
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	return ret;
+}
+
diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c
--- linux.old/arch/mips/bcm947xx/sbpci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/sbpci.c	2005-11-07 23:53:20.981131500 +0100
@@ -0,0 +1,588 @@
+/*
+ * Low-Level PCI and SB support for BCM47xx
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <pcicfg.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <sbpci.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <bcmnvram.h>
+#include <hndmips.h>
+
+/* Can free sbpci_init() memory after boot */
+#ifndef linux
+#define __init
+#endif
+
+/* Emulated configuration space */
+static pci_config_regs sb_config_regs[SB_MAXCORES];
+
+/* Banned cores */
+static uint16 pci_ban[32] = { 0 };
+static uint pci_banned = 0;
+
+/* CardBus mode */
+static bool cardbus = FALSE;
+
+/* Disable PCI host core */
+static bool pci_disabled = FALSE;
+
+/*
+ * Functions for accessing external PCI configuration space
+ */
+
+/* Assume one-hot slot wiring */
+#define PCI_SLOT_MAX 16
+
+static uint32
+config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
+{
+	uint coreidx;
+	sbpciregs_t *regs;
+	uint32 addr = 0;
+
+	/* CardBusMode supports only one device */
+	if (cardbus && dev > 1)
+		return 0;
+
+	coreidx = sb_coreidx(sbh);
+	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
+	/* Type 0 transaction */
+	if (bus == 1) {
+		/* Skip unwired slots */
+		if (dev < PCI_SLOT_MAX) {
+			/* Slide the PCI window to the appropriate slot */
+			W_REG(&regs->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
+			addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
+				(func << 8) | (off & ~3);
+		}
+	}
+
+	/* Type 1 transaction */
+	else {
+		W_REG(&regs->sbtopci1, SBTOPCI_CFG1);
+		addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
+	}
+
+	sb_setcoreidx(sbh, coreidx);
+
+	return addr;
+}
+
+static int
+extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	uint32 addr, *reg = NULL, val;
+	int ret = 0;
+
+	if (pci_disabled ||
+	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
+	    BUSPROBE(val, reg))
+		val = 0xffffffff;
+
+	val >>= 8 * (off & 3);
+	if (len == 4)
+		*((uint32 *) buf) = val;
+	else if (len == 2)
+		*((uint16 *) buf) = (uint16) val;
+	else if (len == 1)
+		*((uint8 *) buf) = (uint8) val;
+	else
+		ret = -1;
+
+	if (reg)
+		REG_UNMAP(reg);
+
+	return ret;
+}
+
+static int
+extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	uint32 addr, *reg = NULL, val;
+	int ret = 0;
+
+	if (pci_disabled ||
+	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
+	    BUSPROBE(val, reg))
+		goto done;
+
+	if (len == 4)
+		val = *((uint32 *) buf);
+	else if (len == 2) {
+		val &= ~(0xffff << (8 * (off & 3)));
+		val |= *((uint16 *) buf) << (8 * (off & 3));
+	} else if (len == 1) {
+		val &= ~(0xff << (8 * (off & 3)));
+		val |= *((uint8 *) buf) << (8 * (off & 3));
+	} else
+		ret = -1;
+
+	W_REG(reg, val);
+
+ done:
+	if (reg)
+		REG_UNMAP(reg);
+
+	return ret;
+}
+
+/*
+ * Functions for accessing translated SB configuration space
+ */
+
+static int
+sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	pci_config_regs *cfg;
+
+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
+		return -1;
+	cfg = &sb_config_regs[dev];
+
+	ASSERT(ISALIGNED(off, len));
+	ASSERT(ISALIGNED((uintptr)buf, len));
+
+	if (len == 4)
+		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
+	else if (len == 2)
+		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
+	else if (len == 1)
+		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
+	else
+		return -1;
+
+	return 0;
+}
+
+static int
+sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	uint coreidx, n;
+	void *regs;
+	sbconfig_t *sb;
+	pci_config_regs *cfg;
+
+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
+		return -1;
+	cfg = &sb_config_regs[dev];
+
+	ASSERT(ISALIGNED(off, len));
+	ASSERT(ISALIGNED((uintptr)buf, len));
+
+	/* Emulate BAR sizing */
+	if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
+	    len == 4 && *((uint32 *) buf) == ~0) {
+		coreidx = sb_coreidx(sbh);
+		if ((regs = sb_setcoreidx(sbh, dev))) {
+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+			/* Highest numbered address match register */
+			n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
+			if (off == OFFSETOF(pci_config_regs, base[0]))
+				cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
+			else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
+				cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
+			else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
+				cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
+			else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
+				cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);
+		}
+		sb_setcoreidx(sbh, coreidx);
+		return 0;
+	}
+
+	if (len == 4)
+		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
+	else if (len == 2)
+		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
+	else if (len == 1)
+		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
+	else
+		return -1;
+
+	return 0;
+}
+
+int
+sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	if (bus == 0)
+		return sb_read_config(sbh, bus, dev, func, off, buf, len);
+	else
+		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
+}
+
+int
+sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+	if (bus == 0)
+		return sb_write_config(sbh, bus, dev, func, off, buf, len);
+	else
+		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
+}
+
+void
+sbpci_ban(uint16 core)
+{
+	if (pci_banned < ARRAYSIZE(pci_ban))
+		pci_ban[pci_banned++] = core;
+}
+
+static int
+sbpci_init_pci(sb_t *sbh)
+{
+	uint chip, chiprev, chippkg, host;
+	uint32 boardflags;
+	sbpciregs_t *pci;
+	sbconfig_t *sb;
+	uint32 val;
+
+	chip = sb_chip(sbh);
+	chiprev = sb_chiprev(sbh);
+	chippkg = sb_chippkg(sbh);
+
+	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
+		printf("PCI: no core\n");
+		pci_disabled = TRUE;
+		return -1;
+	}
+	sb_core_reset(sbh, 0);
+
+	boardflags = (uint32) getintvar(NULL, "boardflags");
+
+	if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0))
+		pci_disabled = TRUE;
+
+	/*
+	 * The 200-pin BCM4712 package does not bond out PCI. Even when
+	 * PCI is bonded out, some boards may leave the pins
+	 * floating.
+	 */
+	if (((chip == BCM4712_DEVICE_ID) &&
+	     ((chippkg == BCM4712SMALL_PKG_ID) ||
+	      (chippkg == BCM4712MID_PKG_ID))) ||
+	    (boardflags & BFL_NOPCI))
+		pci_disabled = TRUE;
+
+	/*
+	 * If the PCI core should not be touched (disabled, not bonded
+	 * out, or pins floating), do not even attempt to access core
+	 * registers. Otherwise, try to determine if it is in host
+	 * mode.
+	 */
+	if (pci_disabled)
+		host = 0;
+	else
+		host = !BUSPROBE(val, &pci->control);
+
+	if (!host) {
+		/* Disable PCI interrupts in client mode */
+		sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
+		W_REG(&sb->sbintvec, 0);
+
+		/* Disable the PCI bridge in client mode */
+		sbpci_ban(SB_PCI);
+		printf("PCI: Disabled\n");
+	} else {
+		/* Reset the external PCI bus and enable the clock */
+		W_REG(&pci->control, 0x5);		/* enable the tristate drivers */
+		W_REG(&pci->control, 0xd);		/* enable the PCI clock */
+		OSL_DELAY(150);				/* delay > 100 us */
+		W_REG(&pci->control, 0xf);		/* deassert PCI reset */
+		W_REG(&pci->arbcontrol, PCI_INT_ARB);	/* use internal arbiter */
+		OSL_DELAY(1);				/* delay 1 us */
+
+		/* Enable CardBusMode */
+		cardbus = nvram_match("cardbus", "1");
+		if (cardbus) {
+			printf("PCI: Enabling CardBus\n");
+			/* GPIO 1 resets the CardBus device on bcm94710ap */
+			sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
+			sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
+			W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
+		}
+
+		/* 64 MB I/O access window */
+		W_REG(&pci->sbtopci0, SBTOPCI_IO);
+		/* 64 MB configuration access window */
+		W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
+		/* 1 GB memory access window */
+		W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
+
+		/* Enable PCI bridge BAR0 prefetch and burst */
+		val = 6;
+		sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
+
+		/* Enable PCI interrupts */
+		W_REG(&pci->intmask, PCI_INTA);
+	}
+	
+	return 0;
+}
+
+static int
+sbpci_init_cores(sb_t *sbh)
+{
+	uint chip, chiprev, chippkg, coreidx, i;
+	sbconfig_t *sb;
+	pci_config_regs *cfg;
+	void *regs;
+	char varname[8];
+	uint wlidx = 0;
+	uint16 vendor, core;
+	uint8 class, subclass, progif;
+	uint32 val;
+	uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
+	uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
+
+	chip = sb_chip(sbh);
+	chiprev = sb_chiprev(sbh);
+	chippkg = sb_chippkg(sbh);
+	coreidx = sb_coreidx(sbh);
+
+	/* Scan the SB bus */
+	bzero(sb_config_regs, sizeof(sb_config_regs));
+	for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
+		cfg->vendor = 0xffff;
+		if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
+			continue;
+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+		/* Read ID register and parse vendor and core */
+		val = R_REG(&sb->sbidhigh);
+		vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
+		core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
+		progif = 0;
+
+		/* Check if this core is banned */
+		for (i = 0; i < pci_banned; i++)
+			if (core == pci_ban[i])
+				break;
+		if (i < pci_banned)
+			continue;
+
+		/* Known vendor translations */
+		switch (vendor) {
+		case SB_VEND_BCM:
+			vendor = VENDOR_BROADCOM;
+			break;
+		}
+
+		/* Determine class based on known core codes */
+		switch (core) {
+		case SB_ILINE20:
+			class = PCI_CLASS_NET;
+			subclass = PCI_NET_ETHER;
+			core = BCM47XX_ILINE_ID;
+			break;
+		case SB_ILINE100:
+			class = PCI_CLASS_NET;
+			subclass = PCI_NET_ETHER;
+			core = BCM4610_ILINE_ID;
+			break;
+		case SB_ENET:
+			class = PCI_CLASS_NET;
+			subclass = PCI_NET_ETHER;
+			core = BCM47XX_ENET_ID;
+			break;
+		case SB_SDRAM:
+		case SB_MEMC:
+			class = PCI_CLASS_MEMORY;
+			subclass = PCI_MEMORY_RAM;
+			break;
+		case SB_PCI:
+			class = PCI_CLASS_BRIDGE;
+			subclass = PCI_BRIDGE_PCI;
+			break;
+		case SB_MIPS:
+		case SB_MIPS33:
+			class = PCI_CLASS_CPU;
+			subclass = PCI_CPU_MIPS;
+			break;
+		case SB_CODEC:
+			class = PCI_CLASS_COMM;
+			subclass = PCI_COMM_MODEM;
+			core = BCM47XX_V90_ID;
+			break;
+		case SB_USB:
+			class = PCI_CLASS_SERIAL;
+			subclass = PCI_SERIAL_USB;
+			progif = 0x10; /* OHCI */
+			core = BCM47XX_USB_ID;
+			break;
+		case SB_USB11H:
+			class = PCI_CLASS_SERIAL;
+			subclass = PCI_SERIAL_USB;
+			progif = 0x10; /* OHCI */
+			core = BCM47XX_USBH_ID;
+			break;
+		case SB_USB11D:
+			class = PCI_CLASS_SERIAL;
+			subclass = PCI_SERIAL_USB;
+			core = BCM47XX_USBD_ID;
+			break;
+		case SB_IPSEC:
+			class = PCI_CLASS_CRYPT;
+			subclass = PCI_CRYPT_NETWORK;
+			core = BCM47XX_IPSEC_ID;
+			break;
+		case SB_ROBO:
+			class = PCI_CLASS_NET;
+			subclass = PCI_NET_OTHER;
+			core = BCM47XX_ROBO_ID;
+			break;
+		case SB_EXTIF:
+		case SB_CC:
+			class = PCI_CLASS_MEMORY;
+			subclass = PCI_MEMORY_FLASH;
+			break;
+		case SB_D11:
+			class = PCI_CLASS_NET;
+			subclass = PCI_NET_OTHER;
+			/* Let an nvram variable override this */
+			sprintf(varname, "wl%did", wlidx);
+			wlidx++;
+			if ((core = getintvar(NULL, varname)) == 0) {
+				if (chip == BCM4712_DEVICE_ID) {
+					if (chippkg == BCM4712SMALL_PKG_ID)
+						core = BCM4306_D11G_ID;
+					else
+						core = BCM4306_D11DUAL_ID;
+				} else {
+					/* 4310 */
+					core = BCM4310_D11B_ID;
+				}
+			}
+			break;
+
+		default:
+			class = subclass = progif = 0xff;
+			break;
+		}
+
+		/* Supported translations */
+		cfg->vendor = htol16(vendor);
+		cfg->device = htol16(core);
+		cfg->rev_id = chiprev;
+		cfg->prog_if = progif;
+		cfg->sub_class = subclass;
+		cfg->base_class = class;
+		cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
+		cfg->base[1] = htol32(sb_base(R_REG(&sb->sbadmatch1)));
+		cfg->base[2] = htol32(sb_base(R_REG(&sb->sbadmatch2)));
+		cfg->base[3] = htol32(sb_base(R_REG(&sb->sbadmatch3)));
+		cfg->base[4] = 0;
+		cfg->base[5] = 0;
+		if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
+			cfg->header_type = PCI_HEADER_BRIDGE;
+		else
+			cfg->header_type = PCI_HEADER_NORMAL;
+		/* Save core interrupt flag */
+		cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
+		/* Default to MIPS shared interrupt 0 */
+		cfg->int_line = 0;
+		/* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
+		if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
+		    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+			val = R_REG(&sb->sbipsflag);
+			for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
+				if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
+					break;
+			}
+			if (cfg->int_line > 4)
+				cfg->int_line = 0;
+		}
+		/* Emulated core */
+		*((uint32 *) &cfg->sprom_control) = 0xffffffff;
+	}
+
+	sb_setcoreidx(sbh, coreidx);
+	return 0;
+}
+
+int __init
+sbpci_init(sb_t *sbh)
+{
+	sbpci_init_pci(sbh);
+	sbpci_init_cores(sbh);
+	return 0;
+}
+
+void
+sbpci_check(sb_t *sbh)
+{
+	uint coreidx;
+	sbpciregs_t *pci;
+	uint32 sbtopci1;
+	uint32 buf[64], *ptr, i;
+	ulong pa;
+	volatile uint j;
+
+	coreidx = sb_coreidx(sbh);
+	pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
+	/* Clear the test array */
+	pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
+	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
+	memset(ptr, 0, sizeof(buf));
+
+	/* Point PCI window 1 to memory */
+	sbtopci1 = R_REG(&pci->sbtopci1);
+	W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
+
+	/* Fill the test array via PCI window 1 */
+	ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
+	for (i = 0; i < ARRAYSIZE(buf); i++) {
+		for (j = 0; j < 2; j++);
+		W_REG(&ptr[i], i);
+	}
+	REG_UNMAP(ptr);
+
+	/* Restore PCI window 1 */
+	W_REG(&pci->sbtopci1, sbtopci1);
+
+	/* Check the test array */
+	DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
+	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
+	for (i = 0; i < ARRAYSIZE(buf); i++) {
+		if (ptr[i] != i)
+			break;
+	}
+
+	/* Change the clock if the test fails */
+	if (i < ARRAYSIZE(buf)) {
+		uint32 req, cur;
+
+		cur = sb_clock(sbh);
+		printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
+		for (req = 104000000; req < 176000000; req += 4000000) {
+			printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
+			/* This will only reset if the clocks are valid and have changed */
+			sb_mips_setclock(sbh, req, 0, 0);
+		}
+		/* Should not reach here */
+		ASSERT(0);
+	}
+
+	sb_setcoreidx(sbh, coreidx);
+}
+
diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
--- linux.old/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/setup.c	2005-11-08 00:11:55.346775000 +0100
@@ -0,0 +1,272 @@
+/*
+ * Generic setup routines for Broadcom MIPS boards
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serialP.h>
+#include <linux/ide.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#endif
+
+#include <typedefs.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <bcmutils.h>
+#include <bcmnvram.h>
+#include <sbmips.h>
+#include <trxhdr.h>
+
+extern void bcm947xx_time_init(void);
+extern void bcm947xx_timer_setup(struct irqaction *irq);
+
+#ifdef CONFIG_REMOTE_DEBUG
+extern void set_debug_traps(void);
+extern void rs_kgdb_hook(struct serial_state *);
+extern void breakpoint(void);
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+extern struct ide_ops std_ide_ops;
+#endif
+
+/* Global SB handle */
+sb_t *bcm947xx_sbh = NULL;
+spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED;
+EXPORT_SYMBOL(bcm947xx_sbh);
+EXPORT_SYMBOL(bcm947xx_sbh_lock);
+
+/* Convenience */
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+
+/* Kernel command line */
+char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE;
+
+void
+bcm947xx_machine_restart(char *command)
+{
+	printk("Please stand by while rebooting the system...\n");
+
+	/* Set the watchdog timer to reset immediately */
+	__cli();
+	sb_watchdog(sbh, 1);
+	while (1);
+}
+
+void
+bcm947xx_machine_halt(void)
+{
+	printk("System halted\n");
+
+	/* Disable interrupts and watchdog and spin forever */
+	__cli();
+	sb_watchdog(sbh, 0);
+	while (1);
+}
+
+#ifdef CONFIG_SERIAL
+
+static struct serial_struct rs = {
+	line: 0,
+	flags: ASYNC_BOOT_AUTOCONF,
+	io_type: SERIAL_IO_MEM,
+};
+
+static void __init
+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
+{
+	rs.iomem_base = regs;
+	rs.irq = irq + 2;
+	rs.baud_base = baud_base / 16;
+	rs.iomem_reg_shift = reg_shift;
+
+	early_serial_setup(&rs);
+
+	rs.line++;
+}
+
+static void __init
+serial_setup(sb_t *sbh)
+{
+	sb_serial_init(sbh, serial_add);
+
+#ifdef CONFIG_REMOTE_DEBUG
+	/* Use the last port for kernel debugging */
+	if (rs.iomem_base)
+		rs_kgdb_hook(&rs);
+#endif
+}
+
+#endif /* CONFIG_SERIAL */
+
+void __init
+brcm_setup(void)
+{
+	char *value;
+
+	/* Get global SB handle */
+	sbh = sb_kattach();
+
+	/* Initialize clocks and interrupts */
+	sb_mips_init(sbh);
+
+	if (BCM330X(current_cpu_data.processor_id) &&
+		(read_c0_diag() & BRCM_PFC_AVAIL)) {
+		/* 
+		 * Now that the sbh is inited set the  proper PFC value 
+		 */	
+		printk("Setting the PFC to its default value\n");
+		enable_pfc(PFC_AUTO);
+	}
+
+
+#ifdef CONFIG_SERIAL
+	/* Initialize UARTs */
+	serial_setup(sbh);
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+	ide_ops = &std_ide_ops;
+#endif
+
+	/* Override default command line arguments */
+	value = nvram_get("kernel_cmdline");
+	if (value && strlen(value) && strncmp(value, "empty", 5))
+		strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
+
+
+	/* Generic setup */
+	_machine_restart = bcm947xx_machine_restart;
+	_machine_halt = bcm947xx_machine_halt;
+	_machine_power_off = bcm947xx_machine_halt;
+
+	board_time_init = bcm947xx_time_init;
+	board_timer_setup = bcm947xx_timer_setup;
+}
+
+const char *
+get_system_type(void)
+{
+	static char s[32];
+
+	if (bcm947xx_sbh) {
+		sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh),
+			sb_chiprev(bcm947xx_sbh));
+		return s;
+	}
+	else
+		return "Broadcom BCM947XX";
+}
+
+void __init
+bus_error_init(void)
+{
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition bcm947xx_parts[] = {
+	{ name: "pmon",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
+	{ name: "linux", offset: 0, size: 0, },
+	{ name: "rootfs", offset: 0, size: 0, },
+	{ name: "nvram", offset: 0, size: 0, },
+	{ name: "OpenWrt", offset: 0, size: 0, },
+	{ name: NULL, },
+};
+
+static int __init
+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
+{
+	struct trx_header *trx;
+	unsigned char buf[512];
+	int off;
+	size_t len;
+
+	trx = (struct trx_header *) buf;
+
+	for (off = (256*1024); off < size; off += mtd->erasesize) {
+		memset(buf, 0xe5, sizeof(buf));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
+		    len != sizeof(buf))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+			part->offset = le32_to_cpu(trx->offsets[2]) ? : 
+				le32_to_cpu(trx->offsets[1]);
+			part->size = le32_to_cpu(trx->len); 
+
+			part->size -= part->offset;
+			part->offset += off;
+
+			goto done;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find root filesystem\n",
+	       mtd->name);
+	return -1;
+
+ done:
+		return part->size;
+}
+
+struct mtd_partition * __init
+init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+
+	/* boot loader */
+	bcm947xx_parts[0].offset=0;
+	bcm947xx_parts[0].size=256*1024;
+
+	/* nvram */
+	bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	bcm947xx_parts[3].size   = size - bcm947xx_parts[3].offset;
+
+	/* Size linux (kernel and rootfs) */
+	bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
+	bcm947xx_parts[1].size   = bcm947xx_parts[3].offset - bcm947xx_parts[1].offset;
+
+	/* Find and size rootfs */
+	if (find_root(mtd,size,&bcm947xx_parts[2])==0) {
+		/* entirely jffs2 */
+		bcm947xx_parts[2].size = bcm947xx_parts[3].offset - bcm947xx_parts[2].offset; 
+		bcm947xx_parts[4].name = NULL;
+	} else {
+		/* legacy setup */
+		/* calculate leftover flash, and assign it to the jffs2 partition */
+		bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + bcm947xx_parts[2].size;
+		bcm947xx_parts[4].offset = ROUNDUP(bcm947xx_parts[4].offset, mtd->erasesize);
+		bcm947xx_parts[4].size = bcm947xx_parts[3].offset - bcm947xx_parts[4].offset;
+	}
+
+	return bcm947xx_parts;
+}
+
+EXPORT_SYMBOL(init_mtd_partitions);
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c
--- linux.old/arch/mips/bcm947xx/sflash.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/sflash.c	2005-11-08 00:54:43.022739000 +0100
@@ -0,0 +1,418 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#include <osl.h>
+#include <typedefs.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <mipsinc.h>
+#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sflash.h>
+
+/* Private global state */
+static struct sflash sflash;
+
+/* Issue a serial flash command */
+static INLINE void
+sflash_cmd(chipcregs_t *cc, uint opcode)
+{
+	W_REG(&cc->flashcontrol, SFLASH_START | opcode);
+	while (R_REG(&cc->flashcontrol) & SFLASH_BUSY);
+}
+
+/* Initialize serial flash access */
+struct sflash *
+sflash_init(chipcregs_t *cc)
+{
+	uint32 id, id2;
+
+	bzero(&sflash, sizeof(sflash));
+
+	sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK;
+
+	switch (sflash.type) {
+	case SFLASH_ST:
+		/* Probe for ST chips */
+		sflash_cmd(cc, SFLASH_ST_DP);
+		sflash_cmd(cc, SFLASH_ST_RES);
+		id = R_REG(&cc->flashdata);
+		switch (id) {
+		case 0x11:
+			/* ST M25P20 2 Mbit Serial Flash */
+			sflash.blocksize = 64 * 1024;
+			sflash.numblocks = 4;
+			break;
+		case 0x12:
+			/* ST M25P40 4 Mbit Serial Flash */
+			sflash.blocksize = 64 * 1024;
+			sflash.numblocks = 8;
+			break;
+		case 0x13:
+			/* ST M25P80 8 Mbit Serial Flash */
+			sflash.blocksize = 64 * 1024;
+			sflash.numblocks = 16;
+			break;
+		case 0x14:
+			/* ST M25P16 16 Mbit Serial Flash */
+			sflash.blocksize = 64 * 1024;
+			sflash.numblocks = 32;
+			break;
+		case 0x15:
+			/* ST M25P32 32 Mbit Serial Flash */
+			sflash.blocksize = 64 * 1024;
+			sflash.numblocks = 64;
+			break;
+		case 0xbf:
+			W_REG(&cc->flashaddress, 1);
+			sflash_cmd(cc, SFLASH_ST_RES);
+			id2 = R_REG(&cc->flashdata);
+			if (id2 == 0x44) {
+				/* SST M25VF80 4 Mbit Serial Flash */
+				sflash.blocksize = 64 * 1024;
+				sflash.numblocks = 8;
+			}
+			break;
+		}
+		break;
+
+	case SFLASH_AT:
+		/* Probe for Atmel chips */
+		sflash_cmd(cc, SFLASH_AT_STATUS);
+		id = R_REG(&cc->flashdata) & 0x3c;
+		switch (id) {
+		case 0xc:
+			/* Atmel AT45DB011 1Mbit Serial Flash */
+			sflash.blocksize = 256;
+			sflash.numblocks = 512;
+			break;
+		case 0x14:
+			/* Atmel AT45DB021 2Mbit Serial Flash */
+			sflash.blocksize = 256;
+			sflash.numblocks = 1024;
+			break;
+		case 0x1c:
+			/* Atmel AT45DB041 4Mbit Serial Flash */
+			sflash.blocksize = 256;
+			sflash.numblocks = 2048;
+			break;
+		case 0x24:
+			/* Atmel AT45DB081 8Mbit Serial Flash */
+			sflash.blocksize = 256;
+			sflash.numblocks = 4096;
+			break;
+		case 0x2c:
+			/* Atmel AT45DB161 16Mbit Serial Flash */
+			sflash.blocksize = 512;
+			sflash.numblocks = 4096;
+			break;
+		case 0x34:
+			/* Atmel AT45DB321 32Mbit Serial Flash */
+			sflash.blocksize = 512;
+			sflash.numblocks = 8192;
+			break;
+		case 0x3c:
+			/* Atmel AT45DB642 64Mbit Serial Flash */
+			sflash.blocksize = 1024;
+			sflash.numblocks = 8192;
+			break;
+		}
+		break;
+	}
+
+	sflash.size = sflash.blocksize * sflash.numblocks;
+	return sflash.size ? &sflash : NULL;
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+int
+sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf)
+{
+	int cnt;
+	uint32 *from, *to;
+
+	if (!len)
+		return 0;
+
+	if ((offset + len) > sflash.size)
+		return -22;
+
+	if ((len >= 4) && (offset & 3))
+		cnt = 4 - (offset & 3);
+	else if ((len >= 4) && ((uint32)buf & 3))
+		cnt = 4 - ((uint32)buf & 3);
+	else
+		cnt = len;
+
+	from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset);
+	to = (uint32 *)buf;
+
+	if (cnt < 4) {
+		bcopy(from, to, cnt);
+		return cnt;
+	}
+
+	while (cnt >= 4) {
+		*to++ = *from++;
+		cnt -= 4;
+	}
+
+	return (len - cnt);
+}
+
+/* Poll for command completion. Returns zero when complete. */
+int
+sflash_poll(chipcregs_t *cc, uint offset)
+{
+	if (offset >= sflash.size)
+		return -22;
+
+	switch (sflash.type) {
+	case SFLASH_ST:
+		/* Check for ST Write In Progress bit */
+		sflash_cmd(cc, SFLASH_ST_RDSR);
+		return R_REG(&cc->flashdata) & SFLASH_ST_WIP;
+	case SFLASH_AT:
+		/* Check for Atmel Ready bit */
+		sflash_cmd(cc, SFLASH_AT_STATUS);
+		return !(R_REG(&cc->flashdata) & SFLASH_AT_READY);
+	}
+
+	return 0;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+int
+sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
+{
+	struct sflash *sfl;
+	int ret = 0;
+	bool is4712b0;
+	uint32 page, byte, mask;
+
+	if (!len)
+		return 0;
+
+	if ((offset + len) > sflash.size)
+		return -22;
+
+	sfl = &sflash;
+	switch (sfl->type) {
+	case SFLASH_ST:
+		mask = R_REG(&cc->chipid);
+		is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
+			    ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT)));
+		/* Enable writes */
+		sflash_cmd(cc, SFLASH_ST_WREN);
+		if (is4712b0) {
+			mask = 1 << 14;
+			W_REG(&cc->flashaddress, offset);
+			W_REG(&cc->flashdata, *buf++);
+			/* Set chip select */
+			OR_REG(&cc->gpioout, mask);
+			/* Issue a page program with the first byte */
+			sflash_cmd(cc, SFLASH_ST_PP);
+			ret = 1;
+			offset++;
+			len--;
+			while (len > 0) {
+				if ((offset & 255) == 0) {
+					/* Page boundary, drop cs and return */
+					AND_REG(&cc->gpioout, ~mask);
+					if (!sflash_poll(cc, offset)) {
+						/* Flash rejected command */
+						return -11;
+					}
+					return ret;
+				} else {
+					/* Write single byte */
+					sflash_cmd(cc, *buf++);
+				}
+				ret++;
+				offset++;
+				len--;
+			}
+			/* All done, drop cs if needed */
+			if ((offset & 255) != 1) {
+				/* Drop cs */
+				AND_REG(&cc->gpioout, ~mask);
+				if (!sflash_poll(cc, offset)) {
+					/* Flash rejected command */
+					return -12;
+				}
+			}
+		} else {
+			ret = 1;
+			W_REG(&cc->flashaddress, offset);
+			W_REG(&cc->flashdata, *buf);
+			/* Page program */
+			sflash_cmd(cc, SFLASH_ST_PP);
+		}
+		break;
+	case SFLASH_AT:
+		mask = sfl->blocksize - 1;
+		page = (offset & ~mask) << 1;
+		byte = offset & mask;
+		/* Read main memory page into buffer 1 */
+		if (byte || len < sfl->blocksize) {
+			W_REG(&cc->flashaddress, page);
+			sflash_cmd(cc, SFLASH_AT_BUF1_LOAD);
+			/* 250 us for AT45DB321B */
+			SPINWAIT(sflash_poll(cc, offset), 1000);
+			ASSERT(!sflash_poll(cc, offset));
+		}
+		/* Write into buffer 1 */
+		for (ret = 0; ret < len && byte < sfl->blocksize; ret++) {
+			W_REG(&cc->flashaddress, byte++);
+			W_REG(&cc->flashdata, *buf++);
+			sflash_cmd(cc, SFLASH_AT_BUF1_WRITE);
+		}
+		/* Write buffer 1 into main memory page */
+		W_REG(&cc->flashaddress, page);
+		sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM);
+		break;
+	}
+
+	return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+int
+sflash_erase(chipcregs_t *cc, uint offset)
+{
+	struct sflash *sfl;
+
+	if (offset >= sflash.size)
+		return -22;
+
+	sfl = &sflash;
+	switch (sfl->type) {
+	case SFLASH_ST:
+		sflash_cmd(cc, SFLASH_ST_WREN);
+		W_REG(&cc->flashaddress, offset);
+		sflash_cmd(cc, SFLASH_ST_SE);
+		return sfl->blocksize;
+	case SFLASH_AT:
+		W_REG(&cc->flashaddress, offset << 1);
+		sflash_cmd(cc, SFLASH_AT_PAGE_ERASE);
+		return sfl->blocksize;
+	}
+
+	return 0;
+}
+
+/*
+ * writes the appropriate range of flash, a NULL buf simply erases
+ * the region of flash
+ */
+int
+sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
+{
+	struct sflash *sfl;
+	uchar *block = NULL, *cur_ptr, *blk_ptr;
+	uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
+	uint blk_offset, blk_len, copied;
+	int bytes, ret = 0;
+
+	/* Check address range */
+	if (len <= 0)
+		return 0;
+
+	sfl = &sflash;
+	if ((offset + len) > sfl->size)
+		return -1;
+
+	blocksize = sfl->blocksize;
+	mask = blocksize - 1;
+
+	/* Allocate a block of mem */
+	if (!(block = MALLOC(NULL, blocksize)))
+		return -1;
+
+	while (len) {
+		/* Align offset */
+		cur_offset = offset & ~mask;
+		cur_length = blocksize;
+		cur_ptr = block;
+
+		remainder = blocksize - (offset & mask);
+		if (len < remainder)
+			cur_retlen = len;
+		else
+			cur_retlen = remainder;
+
+		/* buf == NULL means erase only */
+		if (buf) {
+			/* Copy existing data into holding block if necessary */
+			if ((offset & mask)  || (len < blocksize)) {
+				blk_offset = cur_offset;
+				blk_len = cur_length;
+				blk_ptr = cur_ptr;
+
+				/* Copy entire block */
+				while(blk_len) {
+					copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); 
+					blk_offset += copied;
+					blk_len -= copied;
+					blk_ptr += copied;
+				}
+			}
+
+			/* Copy input data into holding block */
+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
+		}
+
+		/* Erase block */
+		if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0)
+			goto done;
+		while (sflash_poll(cc, (uint) cur_offset));
+
+		/* buf == NULL means erase only */
+		if (!buf) {
+			offset += cur_retlen;
+			len -= cur_retlen;
+			continue;
+		}
+
+		/* Write holding block */
+		while (cur_length > 0) {
+			if ((bytes = sflash_write(cc,
+						  (uint) cur_offset,
+						  (uint) cur_length,
+						  (uchar *) cur_ptr)) < 0) {
+				ret = bytes;
+				goto done;
+			}
+			while (sflash_poll(cc, (uint) cur_offset));
+			cur_offset += bytes;
+			cur_length -= bytes;
+			cur_ptr += bytes;
+		}
+
+		offset += cur_retlen;
+		len -= cur_retlen;
+		buf += cur_retlen;
+	}
+
+	ret = len;
+done:
+	if (block)
+		MFREE(NULL, block, blocksize);
+	return ret;
+}
+
diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
--- linux.old/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/time.c	2005-11-07 23:47:27.528101500 +0100
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: time.c,v 1.1 2005/03/16 13:49:59 wbx Exp $
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/serial_reg.h>
+#include <linux/interrupt.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <typedefs.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <bcmnvram.h>
+#include <sbconfig.h>
+#include <sbextif.h>
+#include <sbmips.h>
+
+/* Global SB handle */
+extern void *bcm947xx_sbh;
+extern spinlock_t bcm947xx_sbh_lock;
+
+/* Convenience */
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+
+extern int panic_timeout;
+static int watchdog = 0;
+static u8 *mcr = NULL;
+
+void __init
+bcm947xx_time_init(void)
+{
+	unsigned int hz;
+	extifregs_t *eir;
+
+	/*
+	 * Use deterministic values for initial counter interrupt
+	 * so that calibrate delay avoids encountering a counter wrap.
+	 */
+	write_c0_count(0);
+	write_c0_compare(0xffff);
+
+	if (!(hz = sb_mips_clock(sbh)))
+		hz = 100000000;
+
+	printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
+	       (hz + 500000) / 1000000);
+
+	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
+	mips_hpt_frequency = hz / 2;
+
+	/* Set watchdog interval in ms */
+	watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
+	
+   	/* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
+	if (watchdog > 0) {
+		if (watchdog < 3000)
+			watchdog = 3000;
+	}
+
+
+	/* Set panic timeout in seconds */
+	panic_timeout = watchdog / 1000;
+
+	/* Setup blink */
+	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
+		sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF);
+		unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1)));
+		mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1);
+	}
+}
+
+static void
+bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Generic MIPS timer code */
+	timer_interrupt(irq, dev_id, regs);
+
+	/* Set the watchdog timer to reset after the specified number of ms */
+	if (watchdog > 0)
+		sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
+
+#ifdef	CONFIG_HWSIM
+	(*((int *)0xa0000f1c))++;
+#else
+	/* Blink one of the LEDs in the external UART */
+	if (mcr && !(jiffies % (HZ/2)))
+		writeb(readb(mcr) ^ UART_MCR_OUT2, mcr);
+#endif
+}
+
+static struct irqaction bcm947xx_timer_irqaction = {
+	bcm947xx_timer_interrupt,
+	SA_INTERRUPT,
+	0,
+	"timer",
+	NULL,
+	NULL
+};
+
+void __init
+bcm947xx_timer_setup(struct irqaction *irq)
+{
+	/* Enable the timer interrupt */
+	setup_irq(7, &bcm947xx_timer_irqaction);
+}
diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
--- linux.old/arch/mips/config-shared.in	2005-11-07 23:12:50.850903750 +0100
+++ linux.dev/arch/mips/config-shared.in	2005-11-07 21:57:07.889588500 +0100
@@ -208,6 +208,14 @@
    fi
    define_bool CONFIG_MIPS_RTC y
 fi
+dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL
+dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM
+if [ "$CONFIG_BCM947XX" = "y" ] ; then
+   bool '    Support for Broadcom BCM4710' CONFIG_BCM4710
+   bool '    Support for Broadcom BCM4310' CONFIG_BCM4310
+   bool '    Support for Broadcom BCM4704' CONFIG_BCM4704
+   bool '    Support for Broadcom BCM5365' CONFIG_BCM5365
+fi
 bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
 bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
 bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
@@ -229,6 +237,11 @@
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
 
 #
+# Provide an option for a default kernel command line
+#
+string 'Default kernel command string' CONFIG_CMDLINE ""
+
+#
 # Select some configuration options automatically based on user selections.
 #
 if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
@@ -554,6 +567,13 @@
    define_bool CONFIG_SWAP_IO_SPACE_L y
    define_bool CONFIG_BOOT_ELF32 y
 fi
+if [ "$CONFIG_BCM947XX" = "y" ] ; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_HND y
+fi
 if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
    define_bool CONFIG_ARC32 y
    define_bool CONFIG_ARC_MEMORY y
@@ -1042,7 +1062,11 @@
 
 bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
 bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
-bool 'Remote GDB kernel debugging' CONFIG_KGDB
+if [ "$CONFIG_BCM947XX" = "y" ] ; then
+	bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
+else 
+	bool 'Remote GDB kernel debugging' CONFIG_KGDB
+fi
 dep_bool '  Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
 if [ "$CONFIG_KGDB" = "y" ]; then
    define_bool CONFIG_DEBUG_INFO y
diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
--- linux.old/arch/mips/kernel/cpu-probe.c	2005-11-07 23:12:50.890906250 +0100
+++ linux.dev/arch/mips/kernel/cpu-probe.c	2005-11-07 21:57:07.893588750 +0100
@@ -163,7 +163,7 @@
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 {
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		c->isa_level = MIPS_CPU_ISA_I;
@@ -173,7 +173,7 @@
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R3000:
-		if ((c->processor_id & 0xff) == PRID_REV_R3000A)
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A)
 			if (cpu_has_confreg())
 				c->cputype = CPU_R3081E;
 			else
@@ -188,12 +188,12 @@
 		break;
 	case PRID_IMP_R4000:
 		if (read_c0_config() & CONF_SC) {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+			if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
 				c->cputype = CPU_R4400PC;
 			else
 				c->cputype = CPU_R4000PC;
 		} else {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+			if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
 				c->cputype = CPU_R4400SC;
 			else
 				c->cputype = CPU_R4000SC;
@@ -439,7 +439,7 @@
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
 	decode_config1(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
 		c->isa_level = MIPS_CPU_ISA_M32;
@@ -480,10 +480,10 @@
 {
 	decode_config1(c);
 	c->options |= MIPS_CPU_PREFETCH;
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
-		switch ((c->processor_id >> 24) & 0xff) {
+		switch ((c->processor_id >> 24) & PRID_REV_MASK) {
 		case 0:
  			c->cputype = CPU_AU1000;
 			break;
@@ -511,10 +511,34 @@
 	}
 }
 
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+{
+	decode_config1(c);
+	c->options |= MIPS_CPU_PREFETCH;
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_BCM4710:
+			c->cputype = CPU_BCM4710;
+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | 
+								MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
+			c->scache.flags = MIPS_CACHE_NOT_PRESENT;
+			break;
+	case PRID_IMP_4KC:              
+	case PRID_IMP_BCM3302:          
+			c->cputype = CPU_BCM3302;
+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | 
+								MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
+			c->scache.flags = MIPS_CACHE_NOT_PRESENT;
+			break;
+	default:
+			c->cputype = CPU_UNKNOWN;
+			break;
+	}
+}
+
 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 {
 	decode_config1(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		c->isa_level = MIPS_CPU_ISA_M64;
@@ -536,7 +560,7 @@
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 {
 	decode_config1(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
 		c->isa_level = MIPS_CPU_ISA_M64;
@@ -561,7 +585,7 @@
 	c->cputype	= CPU_UNKNOWN;
 
 	c->processor_id = read_c0_prid();
-	switch (c->processor_id & 0xff0000) {
+	switch (c->processor_id & PRID_COMP_MASK) {
 
 	case PRID_COMP_LEGACY:
 		cpu_probe_legacy(c);
@@ -572,6 +596,9 @@
 	case PRID_COMP_ALCHEMY:
 		cpu_probe_alchemy(c);
 		break;
+	case PRID_COMP_BROADCOM:
+		cpu_probe_broadcom(c);
+		break;
 	case PRID_COMP_SIBYTE:
 		cpu_probe_sibyte(c);
 		break;
diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
--- linux.old/arch/mips/kernel/head.S	2005-11-07 23:12:50.898906750 +0100
+++ linux.dev/arch/mips/kernel/head.S	2005-11-07 21:57:07.893588750 +0100
@@ -28,12 +28,20 @@
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
 
+#ifdef CONFIG_BCM4710
+#undef eret
+#define eret nop; nop; eret
+#endif
+
 		.text
+		j       kernel_entry
+		nop
+
 		/*
 		 * Reserved space for exception handlers.
 		 * Necessary for machines which link their kernels at KSEG0.
 		 */
-		.fill	0x400
+		.fill	0x3f4
 
 		/* The following two symbols are used for kernel profiling. */
 		EXPORT(stext)
diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
--- linux.old/arch/mips/kernel/proc.c	2005-11-07 23:12:50.906907250 +0100
+++ linux.dev/arch/mips/kernel/proc.c	2005-11-07 21:57:07.893588750 +0100
@@ -78,9 +78,10 @@
 	[CPU_AU1550]	"Au1550",
 	[CPU_24K]	"MIPS 24K",
 	[CPU_AU1200]	"Au1200",
+	[CPU_BCM4710]   "BCM4710",
+	[CPU_BCM3302]   "BCM3302",
 };
 
-
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	unsigned int version = current_cpu_data.processor_id;
diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
--- linux.old/arch/mips/kernel/setup.c	2005-11-07 23:12:50.906907250 +0100
+++ linux.dev/arch/mips/kernel/setup.c	2005-11-07 21:57:07.893588750 +0100
@@ -493,6 +493,7 @@
 	void swarm_setup(void);
 	void hp_setup(void);
 	void au1x00_setup(void);
+	void brcm_setup(void);
 	void frame_info_init(void);
 
 	frame_info_init();
@@ -691,6 +692,11 @@
                 pmc_yosemite_setup();
                 break;
 #endif
+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310)
+	case MACH_GROUP_BRCM:
+			brcm_setup();
+			break;
+#endif	
 	default:
 		panic("Unsupported architecture");
 	}
diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
--- linux.old/arch/mips/kernel/traps.c	2005-11-07 23:12:50.922908250 +0100
+++ linux.dev/arch/mips/kernel/traps.c	2005-11-07 21:57:07.893588750 +0100
@@ -920,6 +920,7 @@
 void __init trap_init(void)
 {
 	extern char except_vec1_generic;
+	extern char except_vec2_generic;
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec_ejtag_debug;
 	extern char except_vec4;
@@ -927,6 +928,7 @@
 
 	/* Copy the generic exception handler code to it's final destination. */
 	memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
+	memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
 
 	/*
 	 * Setup default vectors
@@ -985,6 +987,12 @@
 	set_except_vector(13, handle_tr);
 	set_except_vector(22, handle_mdmx);
 
+	if (current_cpu_data.cputype == CPU_SB1) {
+		/* Enable timer interrupt and scd mapped interrupt */
+		clear_c0_status(0xf000);
+		set_c0_status(0xc00);
+	}
+
 	if (cpu_has_fpu && !cpu_has_nofpuex)
 		set_except_vector(15, handle_fpe);
 
diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
--- linux.old/arch/mips/mm/c-r4k.c	2005-11-07 23:12:50.954910250 +0100
+++ linux.dev/arch/mips/mm/c-r4k.c	2005-11-07 21:57:08.157605250 +0100
@@ -1166,3 +1166,47 @@
 	build_clear_page();
 	build_copy_page();
 }
+
+#ifdef CONFIG_BCM4704
+static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
+{
+	unsigned long ic_lsize = current_cpu_data.icache.linesz;
+	int i;
+	for (i = 0; i < nbytes; i += ic_lsize)
+		fill_icache_line((addr + i));
+}
+
+/*
+ *  This must be run from the cache on 4704A0
+ *  so there are no mips core BIU ops in progress
+ *  when the PFC is enabled.
+ */
+#define PFC_CR0         0xff400000      /* control reg 0 */
+#define PFC_CR1         0xff400004      /* control reg 1 */
+static void __init enable_pfc(u32 mode)
+{
+	/* write range */
+	*(volatile u32 *)PFC_CR1 = 0xffff0000;
+
+	/* enable */
+	*(volatile u32 *)PFC_CR0 = mode;
+}
+#endif
+
+
+void check_enable_mips_pfc(int val)
+{
+
+#ifdef CONFIG_BCM4704
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* enable prefetch cache */
+	if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302) 
+		&& (read_c0_diag() & (1 << 29))) {
+			mips32_icache_fill((unsigned long) &enable_pfc, 64);
+			enable_pfc(val);
+	}
+#endif
+}
+
+
diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
--- linux.old/arch/mips/pci/Makefile	2005-11-07 23:12:50.978911750 +0100
+++ linux.dev/arch/mips/pci/Makefile	2005-11-07 21:57:07.897589000 +0100
@@ -13,7 +13,9 @@
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
 obj-$(CONFIG_SNI_RM200_PCI)	+= ops-sni.o
+ifndef CONFIG_BCM947XX
 obj-y				+= pci.o
+endif
 obj-$(CONFIG_PCI_AUTO)		+= pci_auto.o
 
 include $(TOPDIR)/Rules.make
diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
--- linux.old/drivers/char/serial.c	2005-11-07 23:12:51.038915500 +0100
+++ linux.dev/drivers/char/serial.c	2005-11-07 21:57:07.901589250 +0100
@@ -444,6 +444,10 @@
 		return inb(info->port+1);
 #endif
 	case SERIAL_IO_MEM:
+#ifdef CONFIG_BCM4310
+		readb((unsigned long) info->iomem_base +
+				(UART_SCR<<info->iomem_reg_shift));
+#endif
 		return readb((unsigned long) info->iomem_base +
 			     (offset<<info->iomem_reg_shift));
 	default:
@@ -464,6 +468,9 @@
 	case SERIAL_IO_MEM:
 		writeb(value, (unsigned long) info->iomem_base +
 			      (offset<<info->iomem_reg_shift));
+#ifdef CONFIG_BCM4704
+		*((volatile unsigned int *) KSEG1ADDR(0x18000000));
+#endif
 		break;
 	default:
 		outb(value, info->port+offset);
@@ -1728,7 +1735,7 @@
 			/* Special case since 134 is really 134.5 */
 			quot = (2*baud_base / 269);
 		else if (baud)
-			quot = baud_base / baud;
+			quot = (baud_base + (baud / 2)) / baud;
 	}
 	/* If the quotient is zero refuse the change */
 	if (!quot && old_termios) {
@@ -1745,12 +1752,12 @@
 				/* Special case since 134 is really 134.5 */
 				quot = (2*baud_base / 269);
 			else if (baud)
-				quot = baud_base / baud;
+				quot = (baud_base + (baud / 2)) / baud;
 		}
 	}
 	/* As a last resort, if the quotient is zero, default to 9600 bps */
 	if (!quot)
-		quot = baud_base / 9600;
+		quot = (baud_base + 4800) / 9600;
 	/*
 	 * Work around a bug in the Oxford Semiconductor 952 rev B
 	 * chip which causes it to seriously miscalculate baud rates
@@ -5984,6 +5991,13 @@
 	 *	Divisor, bytesize and parity
 	 */
 	state = rs_table + co->index;
+	/*
+ 	 * Safe guard: state structure must have been initialized
+	 */
+	if (state->iomem_base == NULL) {
+		printk("!unable to setup serial console!\n");
+		return -1;
+	}
 	if (doflow)
 		state->flags |= ASYNC_CONS_FLOW;
 	info = &async_sercons;
@@ -5997,7 +6011,7 @@
 	info->io_type = state->io_type;
 	info->iomem_base = state->iomem_base;
 	info->iomem_reg_shift = state->iomem_reg_shift;
-	quot = state->baud_base / baud;
+	quot = (state->baud_base + (baud / 2)) / baud;
 	cval = cflag & (CSIZE | CSTOPB);
 #if defined(__powerpc__) || defined(__alpha__)
 	cval >>= 8;
diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in
--- linux.old/drivers/mtd/maps/Config.in	2005-11-07 23:12:51.086918500 +0100
+++ linux.dev/drivers/mtd/maps/Config.in	2005-11-07 21:57:07.901589250 +0100
@@ -48,6 +48,7 @@
 fi
 
 if [ "$CONFIG_MIPS" = "y" ]; then
+   dep_tristate '  CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
    dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
--- linux.old/drivers/mtd/maps/Makefile	2005-11-07 23:12:51.086918500 +0100
+++ linux.dev/drivers/mtd/maps/Makefile	2005-11-07 21:57:07.905589500 +0100
@@ -3,6 +3,8 @@
 #
 # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
 
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
+
 BELOW25		:= $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
 
 ifeq ($(BELOW25),y)
@@ -10,6 +12,7 @@
 endif
 
 # Chip mappings
+obj-$(CONFIG_MTD_BCM947XX)	+= bcm947xx-flash.o
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
diff -urN linux.old/drivers/mtd/maps/bcm947xx-flash.c linux.dev/drivers/mtd/maps/bcm947xx-flash.c
--- linux.old/drivers/mtd/maps/bcm947xx-flash.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/mtd/maps/bcm947xx-flash.c	2005-11-07 23:33:20.715765500 +0100
@@ -0,0 +1,237 @@
+/*
+ * Flash mapping for BCM947XX boards
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcm947xx-flash.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+
+#include <osl.h>
+#include <typedefs.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sbutils.h>
+#include <trxhdr.h>
+
+/* Global SB handle */
+extern void *bcm947xx_sbh;
+extern spinlock_t bcm947xx_sbh_lock;
+
+/* Convenience */
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+
+#ifdef CONFIG_MTD_PARTITIONS
+extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size);
+#endif
+
+#define WINDOW_ADDR 0x1fc00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
+
+/* e.g., flash=2M or flash=4M */
+static int flash = 0;
+MODULE_PARM(flash, "i");
+static int __init
+bcm947xx_setup(char *str)
+{
+	flash = memparse(str, &str);
+	return 1;
+}
+__setup("flash=", bcm947xx_setup);
+
+static struct mtd_info *bcm947xx_mtd;
+
+__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs)
+{
+	if (map->map_priv_2 == 1)
+		return __raw_readb(map->map_priv_1 + ofs);
+
+	u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1));
+	if (ofs & 1)
+		return ((val >> 8) & 0xff);
+	else
+		return (val & 0xff);
+}
+
+__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs)
+{
+	return __raw_readw(map->map_priv_1 + ofs);
+}
+
+__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs)
+{
+	return __raw_readl(map->map_priv_1 + ofs);
+}
+
+void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	if (len==1) {
+		memcpy_fromio(to, map->map_priv_1 + from, len);
+	} else {
+		int i;
+		u16 *dest = (u16 *) to;
+		u16 *src  = (u16 *) (map->map_priv_1 + from);
+		for (i = 0; i < (len / 2); i++) {
+			dest[i] = src[i];
+		}
+		if (len & 1)
+			*((u8 *)dest+len-1) = src[i] & 0xff;
+	}
+}
+
+void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+	__raw_writeb(d, map->map_priv_1 + adr);
+	mb();
+}
+
+void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+	__raw_writew(d, map->map_priv_1 + adr);
+	mb();
+}
+
+void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+	__raw_writel(d, map->map_priv_1 + adr);
+	mb();
+}
+
+void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+struct map_info bcm947xx_map = {
+	name: "Physically mapped flash",
+	size: WINDOW_SIZE,
+	buswidth: BUSWIDTH,
+	read8: bcm947xx_map_read8,
+	read16: bcm947xx_map_read16,
+	read32: bcm947xx_map_read32,
+	copy_from: bcm947xx_map_copy_from,
+	write8: bcm947xx_map_write8,
+	write16: bcm947xx_map_write16,
+	write32: bcm947xx_map_write32,
+	copy_to: bcm947xx_map_copy_to
+};
+
+#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
+#define init_bcm947xx_map init_module
+#define cleanup_bcm947xx_map cleanup_module
+#endif
+
+mod_init_t init_bcm947xx_map(void)
+{
+	ulong flags;
+ 	uint coreidx;
+	chipcregs_t *cc;
+	uint32 fltype;
+	uint window_addr = 0, window_size = 0;
+	size_t size;
+	int ret = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int i;
+#endif
+
+	spin_lock_irqsave(&sbh_lock, flags);
+	coreidx = sb_coreidx(sbh);
+
+	/* Check strapping option if chipcommon exists */
+	if ((cc = sb_setcore(sbh, SB_CC, 0))) {
+		fltype = readl(&cc->capabilities) & CAP_FLASH_MASK;
+		if (fltype == PFLASH) {
+			bcm947xx_map.map_priv_2 = 1;
+			window_addr = 0x1c000000;
+			bcm947xx_map.size = window_size = 32 * 1024 * 1024;
+			if ((readl(&cc->flash_config) & CC_CFG_DS) == 0)
+				bcm947xx_map.buswidth = 1;
+		}
+	} else {
+		fltype = PFLASH;
+		bcm947xx_map.map_priv_2 = 0;
+		window_addr = WINDOW_ADDR;
+		window_size = WINDOW_SIZE;
+	}
+
+	sb_setcoreidx(sbh, coreidx);
+	spin_unlock_irqrestore(&sbh_lock, flags);
+
+	if (fltype != PFLASH) {
+		printk(KERN_ERR "pflash: found no supported devices\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size);
+	if (!bcm947xx_map.map_priv_1) {
+		printk(KERN_ERR "pflash: ioremap failed\n");
+		ret = -EIO;
+		goto fail;
+	}
+
+	if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
+		printk(KERN_ERR "pflash: cfi_probe failed\n");
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	bcm947xx_mtd->module = THIS_MODULE;
+
+	/* Allow size override for testing */
+	size = flash ? : bcm947xx_mtd->size;
+
+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	parts = init_mtd_partitions(bcm947xx_mtd, size);
+	for (i = 0; parts[i].name; i++);
+	ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
+	if (ret) {
+		printk(KERN_ERR "pflash: add_mtd_partitions failed\n");
+		goto fail;
+	}
+#endif
+
+	return 0;
+
+ fail:
+	if (bcm947xx_mtd)
+		map_destroy(bcm947xx_mtd);
+	if (bcm947xx_map.map_priv_1)
+		iounmap((void *) bcm947xx_map.map_priv_1);
+	bcm947xx_map.map_priv_1 = 0;
+	return ret;
+}
+
+mod_exit_t cleanup_bcm947xx_map(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(bcm947xx_mtd);
+#endif
+	map_destroy(bcm947xx_mtd);
+	iounmap((void *) bcm947xx_map.map_priv_1);
+	bcm947xx_map.map_priv_1 = 0;
+}
+
+module_init(init_bcm947xx_map);
+module_exit(cleanup_bcm947xx_map);
diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
--- linux.old/drivers/net/Config.in	2005-11-07 23:12:51.110920000 +0100
+++ linux.dev/drivers/net/Config.in	2005-11-07 21:57:07.905589500 +0100
@@ -2,6 +2,8 @@
 # Network device configuration
 #
 
+tristate 'Broadcom Home Network Division' CONFIG_HND $CONFIG_PCI
+
 source drivers/net/arcnet/Config.in
 
 tristate 'Dummy net driver support' CONFIG_DUMMY
@@ -174,6 +176,7 @@
 
       dep_tristate '    Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA
       dep_tristate '    Broadcom 4400 ethernet support (EXPERIMENTAL)' CONFIG_B44 $CONFIG_PCI $CONFIG_EXPERIMENTAL
+      dep_tristate '    Proprietary Broadcom 10/100 Ethernet support' CONFIG_ET $CONFIG_PCI
       dep_tristate '    CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
       dep_tristate '    DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI
       if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
--- linux.old/drivers/net/Makefile	2005-11-07 23:12:51.110920000 +0100
+++ linux.dev/drivers/net/Makefile	2005-11-07 21:57:07.905589500 +0100
@@ -3,6 +3,8 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
+
 obj-y           :=
 obj-m           :=
 obj-n           :=
@@ -39,6 +41,9 @@
   obj-$(CONFIG_ISDN) += slhc.o
 endif
 
+subdir-$(CONFIG_HND) += hnd
+subdir-$(CONFIG_ET) += et
+subdir-$(CONFIG_WL) += wl
 subdir-$(CONFIG_NET_PCMCIA) += pcmcia
 subdir-$(CONFIG_NET_WIRELESS) += wireless
 subdir-$(CONFIG_TULIP) += tulip
@@ -69,6 +74,16 @@
 obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
 obj-$(CONFIG_SUNGEM) += sungem.o
 
+ifeq ($(CONFIG_HND),y)
+  obj-y += hnd/hnd.o
+endif
+ifeq ($(CONFIG_ET),y)
+  obj-y += et/et.o
+endif
+ifeq ($(CONFIG_WL),y)
+  obj-y += wl/wl.o
+endif
+
 obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
 obj-$(CONFIG_GMAC) += gmac.o
@@ -266,6 +281,7 @@
 endif
 endif
 
+
 include $(TOPDIR)/Rules.make
 
 clean:
diff -urN linux.old/drivers/net/et/Makefile linux.dev/drivers/net/et/Makefile
--- linux.old/drivers/net/et/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/et/Makefile	2005-11-07 21:57:07.905589500 +0100
@@ -0,0 +1,21 @@
+#
+# Makefile for the Broadcom et driver
+#
+# Copyright 2004, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id: Makefile,v 1.1 2005/03/16 13:50:00 wbx Exp $
+#
+
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCM47XX_CHOPS -DDMA -DBCMDRIVER
+
+O_TARGET	:= et.o
+obj-y		:= et_linux.o etc.o etc47xx.o etc_robo.o etc_adm.o
+obj-m		:= $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
diff -urN linux.old/drivers/net/hnd/Makefile linux.dev/drivers/net/hnd/Makefile
--- linux.old/drivers/net/hnd/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/Makefile	2005-11-07 21:57:07.905589500 +0100
@@ -0,0 +1,19 @@
+#
+# Makefile for the BCM47xx specific kernel interface routines
+# under Linux.
+#
+
+EXTRA_CFLAGS	+= -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
+
+O_TARGET	:= hnd.o
+
+HND_OBJS	:= bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o
+
+export-objs	:= shared_ksyms.o
+obj-y		:= shared_ksyms.o $(HND_OBJS)
+obj-m           := $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
+
+shared_ksyms.c: shared_ksyms.sh $(HND_OBJS)
+	sh -e $< $(HND_OBJS) > $@
diff -urN linux.old/drivers/net/hnd/bcmsrom.c linux.dev/drivers/net/hnd/bcmsrom.c
--- linux.old/drivers/net/hnd/bcmsrom.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/bcmsrom.c	2005-11-07 22:28:05.077337250 +0100
@@ -0,0 +1,936 @@
+/*
+ *  Misc useful routines to access NIC SROM/OTP .
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <bcmsrom.h>
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <sbpcmcia.h>
+#include <pcicfg.h>
+#include <sbutils.h>
+#include <bcmnvram.h>
+
+#include <proto/ethernet.h>	/* for sprom content groking */
+
+#define	VARS_MAX	4096	/* should be reduced */
+
+#define WRITE_ENABLE_DELAY	500	/* 500 ms after write enable/disable toggle */
+#define WRITE_WORD_DELAY	20	/* 20 ms between each word write */
+
+static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count);
+static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count);
+static int initvars_flash_sb(void *sbh, char **vars, int *count);
+static int srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count);
+static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd);
+static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data);
+static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data);
+static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc);
+
+static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count);
+static int initvars_flash(osl_t *osh, char **vp, int len, char *devpath);
+
+/*
+ * Initialize local vars from the right source for this platform.
+ * Return 0 on success, nonzero on error.
+ */
+int
+srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count)
+{
+	ASSERT(bustype == BUSTYPE(bustype));
+	if (vars == NULL || count == NULL)
+		return (0);
+
+	switch (BUSTYPE(bustype)) {
+	case SB_BUS:
+	case JTAG_BUS:
+		return initvars_flash_sb(sbh, vars, count);
+
+	case PCI_BUS:
+		ASSERT(curmap);	/* can not be NULL */
+		return initvars_srom_pci(sbh, curmap, vars, count);
+
+	case PCMCIA_BUS:
+		return initvars_cis_pcmcia(sbh, osh, vars, count);
+
+
+	default:
+		ASSERT(0);
+	}
+	return (-1);
+}
+
+/* support only 16-bit word read from srom */
+int
+srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
+{
+	void *srom;
+	uint i, off, nw;
+
+	ASSERT(bustype == BUSTYPE(bustype));
+
+	/* check input - 16-bit access only */
+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
+		return 1;
+
+	off = byteoff / 2;
+	nw = nbytes / 2;
+
+	if (BUSTYPE(bustype) == PCI_BUS) {
+		if (!curmap)
+			return 1;
+		srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET;
+		if (sprom_read_pci(srom, off, buf, nw, FALSE))
+			return 1;
+	} else if (BUSTYPE(bustype) == PCMCIA_BUS) {
+		for (i = 0; i < nw; i++) {
+			if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
+				return 1;
+		}
+	} else {
+		return 1;
+	}
+
+	return 0;
+}
+
+/* support only 16-bit word write into srom */
+int
+srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
+{
+	uint16 *srom;
+	uint i, off, nw, crc_range;
+	uint16 image[SPROM_SIZE], *p;
+	uint8 crc;
+	volatile uint32 val32;
+
+	ASSERT(bustype == BUSTYPE(bustype));
+
+	/* check input - 16-bit access only */
+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
+		return 1;
+
+	crc_range = (((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
+
+	/* if changes made inside crc cover range */
+	if (byteoff < crc_range) {
+		nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
+		/* read data including entire first 64 words from srom */
+		if (srom_read(bustype, curmap, osh, 0, nw * 2, image))
+			return 1;
+		/* make changes */
+		bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
+		/* calculate crc */
+		htol16_buf(image, crc_range);
+		crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
+		ltoh16_buf(image, crc_range);
+		image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
+		p = image;
+		off = 0;
+	} else {
+		p = buf;
+		off = byteoff / 2;
+		nw = nbytes / 2;
+	}
+
+	if (BUSTYPE(bustype) == PCI_BUS) {
+		srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET);
+		/* enable writes to the SPROM */
+		val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
+		val32 |= SPROM_WRITEEN;
+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
+		bcm_mdelay(WRITE_ENABLE_DELAY);
+		/* write srom */
+		for (i = 0; i < nw; i++) {
+			W_REG(&srom[off + i], p[i]);
+			bcm_mdelay(WRITE_WORD_DELAY);
+		}
+		/* disable writes to the SPROM */
+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
+	} else if (BUSTYPE(bustype) == PCMCIA_BUS) {
+		/* enable writes to the SPROM */
+		if (sprom_cmd_pcmcia(osh, SROM_WEN))
+			return 1;
+		bcm_mdelay(WRITE_ENABLE_DELAY);
+		/* write srom */
+		for (i = 0; i < nw; i++) {
+			sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
+			bcm_mdelay(WRITE_WORD_DELAY);
+		}
+		/* disable writes to the SPROM */
+		if (sprom_cmd_pcmcia(osh, SROM_WDS))
+			return 1;
+	} else {
+		return 1;
+	}
+
+	bcm_mdelay(WRITE_ENABLE_DELAY);
+	return 0;
+}
+
+
+static int
+srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count)
+{
+	char eabuf[32];
+	char *vp, *base;
+	uint8 tup, tlen, sromrev = 1;
+	int i, j;
+	uint varsize;
+	bool ag_init = FALSE;
+	uint32 w32;
+
+	ASSERT(vars);
+	ASSERT(count);
+
+	base = vp = MALLOC(osh, VARS_MAX);
+	ASSERT(vp);
+	if (!vp)
+		return -2;
+
+	i = 0;
+	do {
+		tup = cis[i++];
+		tlen = cis[i++];
+		if ((i + tlen) >= CIS_SIZE)
+			break;
+
+		switch (tup) {
+		case CISTPL_MANFID:
+			vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
+			vp++;
+			vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
+			vp++;
+			break;
+
+		case CISTPL_FUNCE:
+			if (cis[i] == LAN_NID) {
+				ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
+				bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
+				vp += sprintf(vp, "il0macaddr=%s", eabuf);
+				vp++;
+			}
+			break;
+
+		case CISTPL_CFTABLE:
+			vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
+			vp++;
+			break;
+
+		case CISTPL_BRCM_HNBU:
+			switch (cis[i]) {
+			case HNBU_SROMREV:
+				sromrev = cis[i + 1];
+				break;
+
+			case HNBU_CHIPID:
+				vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
+				vp++;
+				vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
+				vp++;
+				if (tlen == 7) {
+					vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
+					vp++;
+				}
+				break;
+
+			case HNBU_BOARDREV:
+				vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
+				vp++;
+				break;
+
+			case HNBU_AA:
+				vp += sprintf(vp, "aa0=%d", cis[i + 1]);
+				vp++;
+				break;
+
+			case HNBU_AG:
+				vp += sprintf(vp, "ag0=%d", cis[i + 1]);
+				vp++;
+				ag_init = TRUE;
+				break;
+
+			case HNBU_CC:
+				ASSERT(sromrev > 1);
+				vp += sprintf(vp, "cc=%d", cis[i + 1]);
+				vp++;
+				break;
+
+			case HNBU_PAPARMS:
+				if (tlen == 2) {
+					ASSERT(sromrev == 1);
+					vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]);
+					vp++;
+				} else if (tlen >= 9) {
+					if (tlen == 10) {
+						ASSERT(sromrev == 2);
+						vp += sprintf(vp, "opo=%d", cis[i + 9]);
+						vp++;
+					} else
+						ASSERT(tlen == 9);
+
+					for (j = 0; j < 3; j++) {
+						vp += sprintf(vp, "pa0b%d=%d", j,
+							      (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
+						vp++;
+					}
+					vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
+					vp++;
+					vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]);
+					vp++;
+				} else
+					ASSERT(tlen >= 9);
+				break;
+
+			case HNBU_OEM:
+				ASSERT(sromrev == 1);
+				vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
+					cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
+					cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
+				vp++;
+				break;
+
+			case HNBU_BOARDFLAGS:
+				w32 = (cis[i + 2] << 8) + cis[i + 1];
+				if (tlen == 5)
+					w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16);
+				vp += sprintf(vp, "boardflags=0x%x", w32);
+				vp++;
+				break;
+
+			case HNBU_LEDS:
+				if (cis[i + 1] != 0xff) {
+					vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
+					vp++;
+				}
+				if (cis[i + 2] != 0xff) {
+					vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
+					vp++;
+				}
+				if (cis[i + 3] != 0xff) {
+					vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
+					vp++;
+				}
+				if (cis[i + 4] != 0xff) {
+					vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
+					vp++;
+				}
+				break;
+
+			case HNBU_CCODE:
+				ASSERT(sromrev > 1);
+				vp += sprintf(vp, "ccode=%c%c", cis[i + 1], cis[i + 2]);
+				vp++;
+				vp += sprintf(vp, "cctl=0x%x", cis[i + 3]);
+				vp++;
+				break;
+
+			case HNBU_CCKPO:
+				ASSERT(sromrev > 2);
+				vp += sprintf(vp, "cckpo=0x%x", (cis[i + 2] << 8) | cis[i + 1]);
+				vp++;
+				break;
+
+			case HNBU_OFDMPO:
+				ASSERT(sromrev > 2);
+				vp += sprintf(vp, "ofdmpo=0x%x", (cis[i + 4] << 24) | 
+					      (cis[i + 3] << 16) | (cis[i + 2] << 8) | cis[i + 1]);
+				vp++;
+				break;
+			}
+			break;
+
+		}
+		i += tlen;
+	} while (tup != 0xff);
+
+	/* Set the srom version */
+	vp += sprintf(vp, "sromrev=%d", sromrev);
+	vp++;
+
+	/* if there is no antenna gain field, set default */
+	if (ag_init == FALSE) {
+		ASSERT(sromrev == 1);
+		vp += sprintf(vp, "ag0=%d", 0xff);
+		vp++;
+	}
+
+	/* final nullbyte terminator */
+	*vp++ = '\0';
+	varsize = (uint)(vp - base);
+
+	ASSERT((vp - base) < VARS_MAX);
+
+	if (varsize == VARS_MAX) {
+		*vars = base;
+	} else {
+		vp = MALLOC(osh, varsize);
+		ASSERT(vp);
+		if (vp)
+			bcopy(base, vp, varsize);
+		MFREE(osh, base, VARS_MAX);
+		*vars = vp;
+		if (!vp) {
+			*count = 0;
+			return -2;
+		}
+	}
+	*count = varsize;
+
+	return (0);
+}
+
+
+/* set PCMCIA sprom command register */
+static int
+sprom_cmd_pcmcia(osl_t *osh, uint8 cmd)
+{
+	uint8 status = 0;
+	uint wait_cnt = 1000;
+
+	/* write sprom command register */
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
+
+	/* wait status */
+	while (wait_cnt--) {
+		OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
+		if (status & SROM_DONE)
+			return 0;
+	}
+
+	return 1;
+}
+
+/* read a word from the PCMCIA srom */
+static int
+sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data)
+{
+	uint8 addr_l, addr_h, data_l, data_h;
+
+	addr_l = (uint8)((addr * 2) & 0xff);
+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
+
+	/* set address */
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
+	/* do read */
+	if (sprom_cmd_pcmcia(osh, SROM_READ))
+		return 1;
+
+	/* read data */
+	data_h = data_l = 0;
+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
+
+	*data = (data_h << 8) | data_l;
+	return 0;
+}
+
+/* write a word to the PCMCIA srom */
+static int
+sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data)
+{
+	uint8 addr_l, addr_h, data_l, data_h;
+
+	addr_l = (uint8)((addr * 2) & 0xff);
+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
+	data_l = (uint8)(data & 0xff);
+	data_h = (uint8)((data >> 8) & 0xff);
+
+	/* set address */
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
+	/* write data */
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
+
+	/* do write */
+	return sprom_cmd_pcmcia(osh, SROM_WRITE);
+}
+
+/*
+ * Read in and validate sprom.
+ * Return 0 on success, nonzero on error.
+ */
+static int
+sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc)
+{
+	int err = 0;
+	uint i;
+
+	/* read the sprom */
+	for (i = 0; i < nwords; i++)
+		buf[i] = R_REG(&sprom[wordoff + i]);
+
+	if (check_crc) {
+		/* fixup the endianness so crc8 will pass */
+		htol16_buf(buf, nwords * 2);
+		if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE)
+			err = 1;
+		/* now correct the endianness of the byte array */
+		ltoh16_buf(buf, nwords * 2);
+	}
+	
+	return err;
+}	
+
+/*
+* Create variable table from memory.
+* Return 0 on success, nonzero on error.
+*/
+static int
+initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count)
+{
+	int c = (int)(end - start);
+
+	/* do it only when there is more than just the null string */
+	if (c > 1) {
+		char *vp = MALLOC(osh, c);
+		ASSERT(vp);
+		if (!vp)
+			return BCME_NOMEM;
+		bcopy(start, vp, c);
+		*vars = vp;
+		*count = c;
+	}
+	else {
+		*vars = NULL;
+		*count = 0;
+	}
+	
+	return 0;
+}
+
+/*
+* Find variables with <devpath> from flash. 'base' points to the beginning 
+* of the table upon enter and to the end of the table upon exit when success.
+* Return 0 on success, nonzero on error.
+*/
+static int
+initvars_flash(osl_t *osh, char **base, int size, char *devpath)
+{
+	char *vp = *base;
+	char *flash;
+	int err;
+	char *s;
+	uint l, dl, copy_len;
+
+	/* allocate memory and read in flash */
+	if (!(flash = MALLOC(osh, NVRAM_SPACE)))
+		return BCME_NOMEM;
+	if ((err = BCMINIT(nvram_getall)(flash, NVRAM_SPACE)))
+		goto exit;
+
+	/* grab vars with the <devpath> prefix in name */
+	dl = strlen(devpath);
+	for (s = flash; s && *s; s += l + 1) {
+		l = strlen(s);
+		
+		/* skip non-matching variable */
+		if (strncmp(s, devpath, dl))
+			continue;
+		
+		/* is there enough room to copy? */
+		copy_len = l - dl + 1;
+		if (size < (int)copy_len) {
+			err = BCME_BUFTOOSHORT;
+			goto exit;
+		}
+
+		/* no prefix, just the name=value */
+		strcpy(vp, &s[dl]);
+		vp += copy_len;
+		size -= copy_len;
+	}
+	
+	/* add null string as terminator */
+	if (size < 1) {
+		err = BCME_BUFTOOSHORT;
+		goto exit;
+	}
+	*vp++ = '\0';
+	
+	*base = vp;
+
+exit:	MFREE(osh, flash, NVRAM_SPACE);
+	return err;
+}
+
+/*
+ * Initialize nonvolatile variable table from flash.
+ * Return 0 on success, nonzero on error.
+ */
+static int
+initvars_flash_sb(void *sbh, char **vars, int *count)
+{
+	osl_t *osh = sb_osh(sbh);
+	char devpath[SB_DEVPATH_BUFSZ];
+	char *vp, *base;
+	int err;
+
+	ASSERT(vars);
+	ASSERT(count);
+
+	if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
+		return err;
+
+	base = vp = MALLOC(osh, VARS_MAX);
+	ASSERT(vp);
+	if (!vp)
+		return BCME_NOMEM;
+
+	if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
+		goto err;
+
+	err = initvars_table(osh, base, vp, vars, count);
+	
+err:	MFREE(osh, base, VARS_MAX);
+	return err;
+}
+
+/*
+ * Initialize nonvolatile variable table from sprom.
+ * Return 0 on success, nonzero on error.
+ */
+static int
+initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count)
+{
+	uint16 w, b[64];
+	uint8 sromrev;
+	struct ether_addr ea;
+	char eabuf[32];		     
+	uint32 w32;
+	int woff, i;
+	char *vp, *base;
+	osl_t *osh = sb_osh(sbh);
+	bool flash = FALSE;
+	char name[SB_DEVPATH_BUFSZ+16], *value;
+	char devpath[SB_DEVPATH_BUFSZ];
+	int err;
+
+	/*
+	* Apply CRC over SROM content regardless SROM is present or not,
+	* and use variable <devpath>sromrev's existance in flash to decide
+	* if we should return an error when CRC fails or read SROM variables
+	* from flash.
+	*/
+	if (sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE)) {
+		if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
+			return err;
+		sprintf(name, "%ssromrev", devpath);
+		if (!(value = getvar(NULL, name)))
+			return (-1);
+		sromrev = (uint8)bcm_strtoul(value, NULL, 0);
+		flash = TRUE;
+	}
+	/* srom is good */
+	else {
+		/* top word of sprom contains version and crc8 */
+		sromrev = b[63] & 0xff;
+		/* bcm4401 sroms misprogrammed */
+		if (sromrev == 0x10)
+			sromrev = 1;
+	}
+	
+	/* srom version check */
+	if (sromrev > 3)
+		return (-2);
+
+	ASSERT(vars);
+	ASSERT(count);
+
+	base = vp = MALLOC(osh, VARS_MAX);
+	ASSERT(vp);
+	if (!vp)
+		return -2;
+
+	/* read variables from flash */
+	if (flash) {
+		if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
+			goto err;
+		goto done;
+	}
+	
+	vp += sprintf(vp, "sromrev=%d", sromrev);
+	vp++;
+
+	if (sromrev >= 3) {
+		/* New section takes over the 3th hardware function space */
+
+		/* Words 22+23 are 11a (mid) ofdm power offsets */
+		w32 = ((uint32)b[23] << 16) | b[22];
+		vp += sprintf(vp, "ofdmapo=%d", w32);
+		vp++;
+
+		/* Words 24+25 are 11a (low) ofdm power offsets */
+		w32 = ((uint32)b[25] << 16) | b[24];
+		vp += sprintf(vp, "ofdmalpo=%d", w32);
+		vp++;
+
+		/* Words 26+27 are 11a (high) ofdm power offsets */
+		w32 = ((uint32)b[27] << 16) | b[26];
+		vp += sprintf(vp, "ofdmahpo=%d", w32);
+		vp++;
+
+		/*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
+		w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8);
+		vp += sprintf(vp, "gpiotimerval=%d", w32);
+
+		/*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
+		w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) |  /* oncount*/
+			((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */
+		vp += sprintf(vp, "gpiotimerval=%d", w32);
+
+		vp++;
+	}
+
+	if (sromrev >= 2) {
+		/* New section takes over the 4th hardware function space */
+
+		/* Word 29 is max power 11a high/low */
+		w = b[29];
+		vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
+		vp++;
+		vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
+		vp++;
+
+		/* Words 30-32 set the 11alow pa settings,
+		 * 33-35 are the 11ahigh ones.
+		 */
+		for (i = 0; i < 3; i++) {
+			vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
+			vp++;
+			vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
+			vp++;
+		}
+		w = b[59];
+		if (w == 0)
+			vp += sprintf(vp, "ccode=");
+		else
+			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
+		vp++;
+
+	}
+
+	/* parameter section of sprom starts at byte offset 72 */
+	woff = 72/2;
+
+	/* first 6 bytes are il0macaddr */
+	ea.octet[0] = (b[woff] >> 8) & 0xff;
+	ea.octet[1] = b[woff] & 0xff;
+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
+	ea.octet[3] = b[woff+1] & 0xff;
+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+	ea.octet[5] = b[woff+2] & 0xff;
+	woff += ETHER_ADDR_LEN/2 ;
+	bcm_ether_ntoa((uchar*)&ea, eabuf);
+	vp += sprintf(vp, "il0macaddr=%s", eabuf);
+	vp++;
+
+	/* next 6 bytes are et0macaddr */
+	ea.octet[0] = (b[woff] >> 8) & 0xff;
+	ea.octet[1] = b[woff] & 0xff;
+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
+	ea.octet[3] = b[woff+1] & 0xff;
+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+	ea.octet[5] = b[woff+2] & 0xff;
+	woff += ETHER_ADDR_LEN/2 ;
+	bcm_ether_ntoa((uchar*)&ea, eabuf);
+	vp += sprintf(vp, "et0macaddr=%s", eabuf);
+	vp++;
+
+	/* next 6 bytes are et1macaddr */
+	ea.octet[0] = (b[woff] >> 8) & 0xff;
+	ea.octet[1] = b[woff] & 0xff;
+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
+	ea.octet[3] = b[woff+1] & 0xff;
+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+	ea.octet[5] = b[woff+2] & 0xff;
+	woff += ETHER_ADDR_LEN/2 ;
+	bcm_ether_ntoa((uchar*)&ea, eabuf);
+	vp += sprintf(vp, "et1macaddr=%s", eabuf);
+	vp++;
+
+	/*
+	 * Enet phy settings one or two singles or a dual
+	 * Bits 4-0 : MII address for enet0 (0x1f for not there)
+	 * Bits 9-5 : MII address for enet1 (0x1f for not there)
+	 * Bit 14   : Mdio for enet0
+	 * Bit 15   : Mdio for enet1
+	 */
+	w = b[woff];
+	vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
+	vp++;
+	vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
+	vp++;
+	vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
+	vp++;
+	vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
+	vp++;
+
+	/* Word 46 has board rev, antennas 0/1 & Country code/control */
+	w = b[46];
+	vp += sprintf(vp, "boardrev=%d", w & 0xff);
+	vp++;
+
+	if (sromrev > 1)
+		vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
+	else
+		vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
+	vp++;
+
+	vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
+	vp++;
+
+	vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
+	vp++;
+
+	/* Words 47-49 set the (wl) pa settings */
+	woff = 47;
+
+	for (i = 0; i < 3; i++) {
+		vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
+		vp++;
+		vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
+		vp++;
+	}
+
+	/*
+	 * Words 50-51 set the customer-configured wl led behavior.
+	 * 8 bits/gpio pin.  High bit:  activehi=0, activelo=1;
+	 * LED behavior values defined in wlioctl.h .
+	 */
+	w = b[50];
+	if ((w != 0) && (w != 0xffff)) {
+		/* gpio0 */
+		vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
+		vp++;
+
+		/* gpio1 */
+		vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
+		vp++;
+	}
+	w = b[51];
+	if ((w != 0) && (w != 0xffff)) {
+		/* gpio2 */
+		vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
+		vp++;
+
+		/* gpio3 */
+		vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
+		vp++;
+	}
+	
+	/* Word 52 is max power 0/1 */
+	w = b[52];
+	vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
+	vp++;
+	vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
+	vp++;
+
+	/* Word 56 is idle tssi target 0/1 */
+	w = b[56];
+	vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
+	vp++;
+	vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
+	vp++;
+
+	/* Word 57 is boardflags, if not programmed make it zero */
+	w32 = (uint32)b[57];
+	if (w32 == 0xffff) w32 = 0;
+	if (sromrev > 1) {
+		/* Word 28 is the high bits of boardflags */
+		w32 |= (uint32)b[28] << 16;
+	}
+	vp += sprintf(vp, "boardflags=%d", w32);
+	vp++;
+
+	/* Word 58 is antenna gain 0/1 */
+	w = b[58];
+	vp += sprintf(vp, "ag0=%d", w & 0xff);
+	vp++;
+
+	vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
+	vp++;
+
+	if (sromrev == 1) {
+		/* set the oem string */
+		vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
+			      ((b[59] >> 8) & 0xff), (b[59] & 0xff),
+			      ((b[60] >> 8) & 0xff), (b[60] & 0xff),
+			      ((b[61] >> 8) & 0xff), (b[61] & 0xff),
+			      ((b[62] >> 8) & 0xff), (b[62] & 0xff));
+		vp++;
+	} else if (sromrev == 2) {
+		/* Word 60 OFDM tx power offset from CCK level */
+		/* OFDM Power Offset - opo */
+		vp += sprintf(vp, "opo=%d", b[60] & 0xff);
+		vp++;
+	} else {
+		/* Word 60: cck power offsets */
+		vp += sprintf(vp, "cckpo=%d", b[60]);
+		vp++;
+
+		/* Words 61+62: 11g ofdm power offsets */
+		w32 = ((uint32)b[62] << 16) | b[61];
+		vp += sprintf(vp, "ofdmgpo=%d", w32);
+		vp++;
+	}
+
+	/* final nullbyte terminator */
+	*vp++ = '\0';
+
+	ASSERT((vp - base) <= VARS_MAX);
+	
+done:	err = initvars_table(osh, base, vp, vars, count);
+	
+err:	MFREE(osh, base, VARS_MAX);
+	return err;
+}
+
+/*
+ * Read the cis and call parsecis to initialize the vars.
+ * Return 0 on success, nonzero on error.
+ */
+static int
+initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count)
+{
+	uint8 *cis = NULL;
+	int rc;
+	uint data_sz;
+
+	data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE;
+
+	if ((cis = MALLOC(osh, data_sz)) == NULL)
+		return (-2);
+
+	if (sb_pcmciarev(sbh) == 1) {
+		if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) {
+			MFREE(osh, cis, data_sz);
+			return (-1);
+		}
+		/* fix up endianess for 16-bit data vs 8-bit parsing */
+		ltoh16_buf((uint16 *)cis, data_sz);
+	} else
+		OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz);
+
+	rc = srom_parsecis(osh, cis, vars, count);
+
+	MFREE(osh, cis, data_sz);
+
+	return (rc);
+}
+
diff -urN linux.old/drivers/net/hnd/bcmutils.c linux.dev/drivers/net/hnd/bcmutils.c
--- linux.old/drivers/net/hnd/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/bcmutils.c	2005-11-08 12:52:21.836276500 +0100
@@ -0,0 +1,1081 @@
+/*
+ * Misc useful OS-independent routines.
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * $Id$
+ */
+
+#include <typedefs.h>
+#ifdef BCMDRIVER
+#include <osl.h>
+#include <sbutils.h>
+#include <bcmnvram.h>
+#else
+#include <stdio.h>
+#include <string.h>
+#endif
+#include <bcmutils.h>
+#include <bcmendian.h>
+#include <bcmdevs.h>
+
+#ifdef BCMDRIVER
+/* copy a pkt buffer chain into a buffer */
+uint
+pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf)
+{
+	uint n, ret = 0;
+
+	if (len < 0)
+		len = 4096;	/* "infinite" */
+
+	/* skip 'offset' bytes */
+	for (; p && offset; p = PKTNEXT(osh, p)) {
+		if (offset < (uint)PKTLEN(osh, p))
+			break;
+		offset -= PKTLEN(osh, p);
+	}
+
+	if (!p)
+		return 0;
+
+	/* copy the data */
+	for (; p && len; p = PKTNEXT(osh, p)) {
+		n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len);
+		bcopy(PKTDATA(osh, p) + offset, buf, n);
+		buf += n;
+		len -= n;
+		ret += n;
+		offset = 0;
+	}
+
+	return ret;
+}
+
+/* return total length of buffer chain */
+uint
+pkttotlen(osl_t *osh, void *p)
+{
+	uint total;
+
+	total = 0;
+	for (; p; p = PKTNEXT(osh, p))
+		total += PKTLEN(osh, p);
+	return (total);
+}
+
+void
+pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[])
+{
+	q->head = q->tail = NULL;
+	q->maxlen = maxlen;
+	q->len = 0;
+	if (prio_map) {
+		q->priority = TRUE;
+		bcopy(prio_map, q->prio_map, sizeof(q->prio_map));
+	}
+	else
+		q->priority = FALSE;
+}
+
+/* should always check pktq_full before calling pktenq */
+void
+pktenq(struct pktq *q, void *p, bool lifo)
+{
+	void *next, *prev;
+
+	/* allow 10 pkts slack */
+	ASSERT(q->len < (q->maxlen + 10));
+
+	/* Queueing chains not allowed */
+	ASSERT(PKTLINK(p) == NULL);
+
+	/* Queue is empty */
+	if (q->tail == NULL) {
+		ASSERT(q->head == NULL);
+		q->head = q->tail = p;
+	}
+
+	/* Insert at head or tail */
+	else if (q->priority == FALSE) {
+		/* Insert at head (LIFO) */
+		if (lifo) {
+			PKTSETLINK(p, q->head);
+			q->head = p;
+		}
+		/* Insert at tail (FIFO) */
+		else {
+			ASSERT(PKTLINK(q->tail) == NULL);
+			PKTSETLINK(q->tail, p);
+			PKTSETLINK(p, NULL);
+			q->tail = p;
+		}
+	}
+
+	/* Insert by priority */
+	else {
+		/* legal priorities 0-7 */
+		ASSERT(PKTPRIO(p) <= MAXPRIO);
+
+		ASSERT(q->head);
+		ASSERT(q->tail);
+		/* Shortcut to insertion at tail */
+		if (_pktq_pri(q, PKTPRIO(p)) < _pktq_pri(q, PKTPRIO(q->tail)) ||
+		    (!lifo && _pktq_pri(q, PKTPRIO(p)) <= _pktq_pri(q, PKTPRIO(q->tail)))) {
+			prev = q->tail;
+			next = NULL;
+		}
+		/* Insert at head or in the middle */
+		else {
+			prev = NULL;
+			next = q->head;
+		}
+		/* Walk the queue */
+		for (; next; prev = next, next = PKTLINK(next)) {
+			/* Priority queue invariant */
+			ASSERT(!prev || _pktq_pri(q, PKTPRIO(prev)) >= _pktq_pri(q, PKTPRIO(next)));
+			/* Insert at head of string of packets of same priority (LIFO) */
+			if (lifo) {
+				if (_pktq_pri(q, PKTPRIO(p)) >= _pktq_pri(q, PKTPRIO(next)))
+					break;
+			}
+			/* Insert at tail of string of packets of same priority (FIFO) */
+			else {
+				if (_pktq_pri(q, PKTPRIO(p)) > _pktq_pri(q, PKTPRIO(next)))
+					break;
+			}
+		}
+		/* Insert at tail */
+		if (next == NULL) {
+			ASSERT(PKTLINK(q->tail) == NULL);
+			PKTSETLINK(q->tail, p);
+			PKTSETLINK(p, NULL);
+			q->tail = p;
+		}
+		/* Insert in the middle */
+		else if (prev) {
+			PKTSETLINK(prev, p);
+			PKTSETLINK(p, next);
+		}
+		/* Insert at head */
+		else {
+			PKTSETLINK(p, q->head);
+			q->head = p;
+		}
+	}
+
+	/* List invariants after insertion */
+	ASSERT(q->head);
+	ASSERT(PKTLINK(q->tail) == NULL);
+
+	q->len++;
+}
+
+/* dequeue packet at head */
+void*
+pktdeq(struct pktq *q)
+{
+	void *p;
+
+	if ((p = q->head)) {
+		ASSERT(q->tail);
+		q->head = PKTLINK(p);
+		PKTSETLINK(p, NULL);
+		q->len--;
+		if (q->head == NULL)
+			q->tail = NULL;
+	}
+	else {
+		ASSERT(q->tail == NULL);
+	}
+
+	return (p);
+}
+
+/* dequeue packet at tail */
+void*
+pktdeqtail(struct pktq *q)
+{
+	void *p;
+	void *next, *prev;
+
+	if (q->head == q->tail) {  /* last packet on queue or queue empty */
+		p = q->head;
+		q->head = q->tail = NULL;
+		q->len = 0;
+		return(p);
+	}
+
+	/* start walk at head */
+	prev = NULL;
+	next = q->head;
+
+	/* Walk the queue to find prev of q->tail */
+	for (; next; prev = next, next = PKTLINK(next)) {
+		if (next == q->tail)
+			break;
+	}
+
+	ASSERT(prev);
+
+	PKTSETLINK(prev, NULL);
+	q->tail = prev;
+	q->len--;
+	p = next;
+
+	return (p);
+}
+
+unsigned char bcm_ctype[] = {
+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 0-7 */
+	_BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C,		/* 8-15 */
+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 16-23 */
+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 24-31 */
+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 32-39 */
+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 40-47 */
+	_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,			/* 48-55 */
+	_BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 56-63 */
+	_BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U,	/* 64-71 */
+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 72-79 */
+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 80-87 */
+	_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 88-95 */
+	_BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L,	/* 96-103 */
+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 104-111 */
+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 112-119 */
+	_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C,			/* 120-127 */
+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,   /* 160-175 */
+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,       /* 176-191 */
+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,       /* 192-207 */
+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L,       /* 208-223 */
+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,       /* 224-239 */
+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L        /* 240-255 */
+};
+
+uchar
+bcm_toupper(uchar c)
+{
+	if (bcm_islower(c))
+		c -= 'a'-'A';
+	return (c);
+}
+
+ulong
+bcm_strtoul(char *cp, char **endp, uint base)
+{
+	ulong result, value;
+	bool minus;
+	
+	minus = FALSE;
+
+	while (bcm_isspace(*cp))
+		cp++;
+	
+	if (cp[0] == '+')
+		cp++;
+	else if (cp[0] == '-') {
+		minus = TRUE;
+		cp++;
+	}
+	
+	if (base == 0) {
+		if (cp[0] == '0') {
+			if ((cp[1] == 'x') || (cp[1] == 'X')) {
+				base = 16;
+				cp = &cp[2];
+			} else {
+				base = 8;
+				cp = &cp[1];
+			}
+		} else
+			base = 10;
+	} else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
+		cp = &cp[2];
+	}
+		   
+	result = 0;
+
+	while (bcm_isxdigit(*cp) &&
+	       (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
+		result = result*base + value;
+		cp++;
+	}
+
+	if (minus)
+		result = (ulong)(result * -1);
+
+	if (endp)
+		*endp = (char *)cp;
+
+	return (result);
+}
+
+uint
+bcm_atoi(char *s)
+{
+	uint n;
+
+	n = 0;
+
+	while (bcm_isdigit(*s))
+		n = (n * 10) + *s++ - '0';
+	return (n);
+}
+
+/* return pointer to location of substring 'needle' in 'haystack' */
+char*
+bcmstrstr(char *haystack, char *needle)
+{
+	int len, nlen;
+	int i;
+
+	if ((haystack == NULL) || (needle == NULL))
+		return (haystack);
+
+	nlen = strlen(needle);
+	len = strlen(haystack) - nlen + 1;
+
+	for (i = 0; i < len; i++)
+		if (bcmp(needle, &haystack[i], nlen) == 0)
+			return (&haystack[i]);
+	return (NULL);
+}
+
+char*
+bcmstrcat(char *dest, const char *src)
+{
+	strcpy(&dest[strlen(dest)], src);
+	return (dest);
+}
+
+#if defined(CONFIG_USBRNDIS_RETAIL) || defined(NDIS_MINIPORT_DRIVER)
+/* registry routine buffer preparation utility functions:
+ * parameter order is like strncpy, but returns count
+ * of bytes copied. Minimum bytes copied is null char(1)/wchar(2)
+ */
+ulong
+wchar2ascii(
+	char *abuf,
+	ushort *wbuf,
+	ushort wbuflen,
+	ulong abuflen
+)
+{
+	ulong copyct = 1;
+	ushort i;
+
+	if (abuflen == 0)
+		return 0;
+
+	/* wbuflen is in bytes */
+	wbuflen /= sizeof(ushort);
+
+	for (i = 0; i < wbuflen; ++i) {
+		if (--abuflen == 0)
+			break;
+		*abuf++ = (char) *wbuf++;
+		++copyct;
+	}
+	*abuf = '\0';
+
+	return copyct;
+}
+#endif
+
+char*
+bcm_ether_ntoa(char *ea, char *buf)
+{
+	sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
+		(uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
+		(uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
+	return (buf);
+}
+
+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
+int
+bcm_ether_atoe(char *p, char *ea)
+{
+	int i = 0;
+
+	for (;;) {
+		ea[i++] = (char) bcm_strtoul(p, &p, 16);
+		if (!*p++ || i == 6)
+			break;
+	}
+
+	return (i == 6);
+}
+
+void
+bcm_mdelay(uint ms)
+{
+	uint i;
+
+	for (i = 0; i < ms; i++) {
+		OSL_DELAY(1000);
+	}
+}
+
+/*
+ * Search the name=value vars for a specific one and return its value.
+ * Returns NULL if not found.
+ */
+char*
+getvar(char *vars, char *name)
+{
+	char *s;
+	int len;
+
+	len = strlen(name);
+
+	/* first look in vars[] */
+	for (s = vars; s && *s; ) {
+		if ((bcmp(s, name, len) == 0) && (s[len] == '='))
+			return (&s[len+1]);
+
+		while (*s++)
+			;
+	}
+
+	/* then query nvram */
+	return (BCMINIT(nvram_get)(name));
+}
+
+/*
+ * Search the vars for a specific one and return its value as
+ * an integer. Returns 0 if not found.
+ */
+int
+getintvar(char *vars, char *name)
+{
+	char *val;
+
+	if ((val = getvar(vars, name)) == NULL)
+		return (0);
+
+	return (bcm_strtoul(val, NULL, 0));
+}
+
+
+/* Search for token in comma separated token-string */
+static int
+findmatch(char *string, char *name)
+{
+	uint len;
+	char *c;
+
+	len = strlen(name);
+	while ((c = strchr(string, ',')) != NULL) {
+		if (len == (uint)(c - string) && !strncmp(string, name, len))
+			return 1;
+		string = c + 1;
+	}
+
+	return (!strcmp(string, name));
+}
+
+/* Return gpio pin number assigned to the named pin */
+/*
+* Variable should be in format:
+*
+*	gpio<N>=pin_name,pin_name
+*
+* This format allows multiple features to share the gpio with mutual
+* understanding.
+*
+* 'def_pin' is returned if a specific gpio is not defined for the requested functionality 
+* and if def_pin is not used by others.
+*/
+uint
+getgpiopin(char *vars, char *pin_name, uint def_pin)
+{
+	char name[] = "gpioXXXX";
+	char *val;
+	uint pin;
+
+	/* Go thru all possibilities till a match in pin name */
+	for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
+		sprintf(name, "gpio%d", pin);
+		val = getvar(vars, name);
+		if (val && findmatch(val, pin_name))
+			return pin;
+	}
+
+	if (def_pin != GPIO_PIN_NOTDEFINED) {
+		/* make sure the default pin is not used by someone else */
+		sprintf(name, "gpio%d", def_pin);
+		if (getvar(vars, name)) {
+			def_pin =  GPIO_PIN_NOTDEFINED;
+		}
+	}
+
+	return def_pin;
+}
+
+
+static char bcm_undeferrstr[BCME_STRLEN];
+
+static const char *bcmerrorstrtable[] =  \
+{	"OK", 				/* 0 */
+	"Undefined error",		/* BCME_ERROR */
+	"Bad Argument",			/* BCME_BADARG*/
+	"Bad Option",			/* BCME_BADOPTION*/
+	"Not up",			/* BCME_NOTUP */
+	"Not down",			/* BCME_NOTDOWN */
+	"Not AP",			/* BCME_NOTAP */
+	"Not STA",			/* BCME_NOTSTA */
+	"Bad Key Index",		/* BCME_BADKEYIDX */
+	"Radio Off",			/* BCME_RADIOOFF */
+	"Not band locked",		/* BCME_NOTBANDLOCKED */
+	"No clock", 			/* BCME_NOCLK */
+	"Bad Rate valueset", 		/* BCME_BADRATESET */
+	"Bad Band", 			/* BCME_BADBAND */
+	"Buffer too short",		/* BCME_BUFTOOSHORT */
+	"Buffer too length",		/* BCME_BUFTOOLONG */
+	"Busy", 			/* BCME_BUSY */
+	"Not Associated", 		/* BCME_NOTASSOCIATED */
+	"Bad SSID len", 		/* BCME_BADSSIDLEN */
+	"Out of Range Channel", 	/* BCME_OUTOFRANGECHAN */
+	"Bad Channel", 			/* BCME_BADCHAN */
+	"Bad Address", 			/* BCME_BADADDR */
+	"Not Enough Resources", 	/* BCME_NORESOURCE */
+	"Unsupported",			/* BCME_UNSUPPORTED */
+	"Bad length",			/* BCME_BADLENGTH */
+	"Not Ready",			/* BCME_NOTREADY */
+	"Not Permitted",		/* BCME_EPERM */
+	"No Memory",			/* BCME_NOMEM */
+	"Associated",			/* BCME_ASSOCIATED */ 
+	"Not In Range",			/* BCME_RANGE */
+	"Not Found"			/* BCME_NOTFOUND */
+	}; 
+
+/* Convert the Error codes into related Error strings  */
+const char *
+bcmerrorstr(int bcmerror)
+{
+	int abs_bcmerror;
+	
+	abs_bcmerror = ABS(bcmerror);	
+
+	/* check if someone added a bcmerror code but forgot to add errorstring */
+	ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(bcmerrorstrtable) - 1));
+	if ( (bcmerror > 0) || (abs_bcmerror > ABS(BCME_LAST))) {
+		sprintf(bcm_undeferrstr, "undefined Error %d", bcmerror);
+		return bcm_undeferrstr;
+	}
+
+	ASSERT((strlen((char*)bcmerrorstrtable[abs_bcmerror])) < BCME_STRLEN); 
+
+	return bcmerrorstrtable[abs_bcmerror];
+}
+#endif	/* #ifdef BCMDRIVER */
+
+
+/*******************************************************************************
+ * crc8
+ *
+ * Computes a crc8 over the input data using the polynomial:
+ *
+ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
+ *
+ * The caller provides the initial value (either CRC8_INIT_VALUE
+ * or the previous returned value) to allow for processing of 
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When checking, a final
+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ ******************************************************************************/
+
+static uint8 crc8_table[256] = {
+    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
+};
+
+#define CRC_INNER_LOOP(n, c, x) \
+    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+
+uint8
+hndcrc8(
+	uint8 *pdata,	/* pointer to array of data to process */
+	uint  nbytes,	/* number of input data bytes to process */
+	uint8 crc	/* either CRC8_INIT_VALUE or previous return value */
+)
+{
+	/* hard code the crc loop instead of using CRC_INNER_LOOP macro
+	 * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
+	while (nbytes-- > 0)
+		crc = crc8_table[(crc ^ *pdata++) & 0xff];
+
+	return crc;
+}
+
+/*******************************************************************************
+ * crc16
+ *
+ * Computes a crc16 over the input data using the polynomial:
+ *
+ *       x^16 + x^12 +x^5 + 1
+ *
+ * The caller provides the initial value (either CRC16_INIT_VALUE
+ * or the previous returned value) to allow for processing of 
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When checking, a final
+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ ******************************************************************************/
+
+static uint16 crc16_table[256] = {
+    0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
+    0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
+    0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
+    0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
+    0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
+    0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
+    0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
+    0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
+    0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
+    0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
+    0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
+    0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
+    0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
+    0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
+    0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
+    0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
+    0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
+    0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
+    0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
+    0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
+    0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
+    0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
+    0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
+    0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
+    0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
+    0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
+    0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
+    0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
+    0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
+    0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
+    0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
+    0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
+};
+
+uint16
+hndcrc16(
+    uint8 *pdata,  /* pointer to array of data to process */
+    uint nbytes, /* number of input data bytes to process */
+    uint16 crc     /* either CRC16_INIT_VALUE or previous return value */
+)
+{
+    while (nbytes-- > 0)
+        CRC_INNER_LOOP(16, crc, *pdata++);
+    return crc;
+}
+
+static uint32 crc32_table[256] = {
+    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+
+uint32
+hndcrc32(
+    uint8 *pdata,  /* pointer to array of data to process */
+    uint   nbytes, /* number of input data bytes to process */
+    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
+)
+{
+    uint8 *pend;
+#ifdef __mips__
+    uint8 tmp[4];
+    ulong *tptr = (ulong *)tmp;
+
+	/* in case the beginning of the buffer isn't aligned */
+	pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
+	nbytes -= (pend - pdata);
+	while (pdata < pend)
+		CRC_INNER_LOOP(32, crc, *pdata++);
+
+    /* handle bulk of data as 32-bit words */
+    pend = pdata + (nbytes & 0xfffffffc);
+    while (pdata < pend) {
+		tptr = *((ulong *) pdata);
+		*((ulong *) pdata) += 1;
+        CRC_INNER_LOOP(32, crc, tmp[0]);
+        CRC_INNER_LOOP(32, crc, tmp[1]);
+        CRC_INNER_LOOP(32, crc, tmp[2]);
+        CRC_INNER_LOOP(32, crc, tmp[3]);
+    }
+
+    /* 1-3 bytes at end of buffer */
+    pend = pdata + (nbytes & 0x03);
+    while (pdata < pend)
+        CRC_INNER_LOOP(32, crc, *pdata++);
+#else
+    pend = pdata + nbytes;
+    while (pdata < pend)
+        CRC_INNER_LOOP(32, crc, *pdata++);
+#endif
+       
+    return crc;
+}
+
+#ifdef notdef
+#define CLEN 	1499
+#define CBUFSIZ 	(CLEN+4)
+#define CNBUFS		5
+
+void testcrc32(void)
+{
+	uint j,k,l;
+	uint8 *buf;
+	uint len[CNBUFS];
+	uint32 crcr;
+	uint32 crc32tv[CNBUFS] =
+		{0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
+
+	ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
+
+	/* step through all possible alignments */
+	for (l=0;l<=4;l++) {
+		for (j=0; j<CNBUFS; j++) {
+			len[j] = CLEN;
+			for (k=0; k<len[j]; k++)
+				*(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
+		}
+
+		for (j=0; j<CNBUFS; j++) {
+			crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
+			ASSERT(crcr == crc32tv[j]);
+		}
+	}
+
+	MFREE(buf, CBUFSIZ*CNBUFS);
+	return;
+}
+#endif
+
+
+/* 
+ * Advance from the current 1-byte tag/1-byte length/variable-length value 
+ * triple, to the next, returning a pointer to the next.
+ * If the current or next TLV is invalid (does not fit in given buffer length),
+ * NULL is returned.
+ * *buflen is not modified if the TLV elt parameter is invalid, or is decremented
+ * by the TLV paramter's length if it is valid.
+ */
+bcm_tlv_t *
+bcm_next_tlv(bcm_tlv_t *elt, int *buflen)
+{
+	int len;
+
+	/* validate current elt */
+	if (!bcm_valid_tlv(elt, *buflen))
+		return NULL;
+	
+	/* advance to next elt */
+	len = elt->len;
+	elt = (bcm_tlv_t*)(elt->data + len);
+	*buflen -= (2 + len);
+	
+	/* validate next elt */
+	if (!bcm_valid_tlv(elt, *buflen))
+		return NULL;
+	
+	return elt;
+}
+
+/* 
+ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
+ * triples, returning a pointer to the substring whose first element 
+ * matches tag
+ */
+bcm_tlv_t *
+bcm_parse_tlvs(void *buf, int buflen, uint key)
+{
+	bcm_tlv_t *elt;
+	int totlen;
+
+	elt = (bcm_tlv_t*)buf;
+	totlen = buflen;
+
+	/* find tagged parameter */
+	while (totlen >= 2) {
+		int len = elt->len;
+
+		/* validate remaining totlen */
+		if ((elt->id == key) && (totlen >= (len + 2)))
+			return (elt);
+
+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
+		totlen -= (len + 2);
+	}
+	
+	return NULL;
+}
+
+/* 
+ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
+ * triples, returning a pointer to the substring whose first element 
+ * matches tag.  Stop parsing when we see an element whose ID is greater
+ * than the target key. 
+ */
+bcm_tlv_t *
+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
+{
+	bcm_tlv_t *elt;
+	int totlen;
+
+	elt = (bcm_tlv_t*)buf;
+	totlen = buflen;
+
+	/* find tagged parameter */
+	while (totlen >= 2) {
+		uint id = elt->id;
+		int len = elt->len;
+		
+		/* Punt if we start seeing IDs > than target key */
+		if (id > key)
+			return(NULL);
+
+		/* validate remaining totlen */
+		if ((id == key) && (totlen >= (len + 2)))
+			return (elt);
+
+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
+		totlen -= (len + 2);
+	}
+	return NULL;
+}
+/* routine to dump fields in a fileddesc structure */
+
+uint 
+bcmdumpfields(readreg_rtn read_rtn, void *arg0, void *arg1, struct fielddesc *fielddesc_array, char *buf, uint32 bufsize)
+{
+	uint  filled_len;
+	uint len;
+	struct fielddesc *cur_ptr;
+
+	filled_len = 0;
+	cur_ptr = fielddesc_array; 
+
+	while (bufsize > (filled_len + 64)) {
+		if (cur_ptr->nameandfmt == NULL)
+			break;
+		len = sprintf(buf, cur_ptr->nameandfmt, read_rtn(arg0, arg1, cur_ptr->offset));
+		buf += len;
+		filled_len += len;
+		cur_ptr++;
+	}
+	return filled_len;
+}
+
+uint
+bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint buflen)
+{
+	uint len;
+
+	len = strlen(name) + 1;
+	
+	if ((len + datalen) > buflen)
+		return 0;
+
+	strcpy(buf, name);
+
+	/* append data onto the end of the name string */
+	memcpy(&buf[len], data, datalen);
+	len += datalen;
+
+	return len;
+}
+
+/* Quarter dBm units to mW
+ * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
+ * Table is offset so the last entry is largest mW value that fits in
+ * a uint16.
+ */
+
+#define QDBM_OFFSET 153
+#define QDBM_TABLE_LEN 40
+
+/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET.
+ * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2
+ */
+#define QDBM_TABLE_LOW_BOUND 6493
+
+/* Largest mW value that will round down to the last table entry,
+ * QDBM_OFFSET + QDBM_TABLE_LEN-1.
+ * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2.
+ */
+#define QDBM_TABLE_HIGH_BOUND 64938
+
+static const uint16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
+/* qdBm:        +0		+1		+2		+3		+4		+5		+6		+7	*/
+/* 153: */      6683,	7079,	7499,	7943,	8414,	8913,	9441,	10000,
+/* 161: */      10593,	11220,	11885,	12589,	13335,	14125,	14962,	15849,
+/* 169: */      16788,	17783,	18836,	19953,	21135,	22387,	23714,	25119,
+/* 177: */      26607,	28184,	29854,	31623,	33497,	35481,	37584,	39811,
+/* 185: */      42170,	44668,	47315,	50119,	53088,	56234,	59566,	63096
+};
+
+uint16
+bcm_qdbm_to_mw(uint8 qdbm)
+{
+	uint factor = 1;
+	int idx = qdbm - QDBM_OFFSET;
+	
+	if (idx > QDBM_TABLE_LEN) {
+		/* clamp to max uint16 mW value */
+		return 0xFFFF;
+	}
+	
+	/* scale the qdBm index up to the range of the table 0-40
+	 * where an offset of 40 qdBm equals a factor of 10 mW.
+	 */
+	while (idx < 0) {
+		idx += 40;
+		factor *= 10;
+	}
+	
+	/* return the mW value scaled down to the correct factor of 10,
+	 * adding in factor/2 to get proper rounding. */
+	return ((nqdBm_to_mW_map[idx] + factor/2) / factor);
+}
+
+uint8
+bcm_mw_to_qdbm(uint16 mw)
+{
+	uint8 qdbm;
+	int offset;
+	uint mw_uint = mw;
+	uint boundary;
+	
+	/* handle boundary case */
+	if (mw_uint <= 1)
+		return 0;
+	
+	offset = QDBM_OFFSET;
+	
+	/* move mw into the range of the table */
+	while (mw_uint < QDBM_TABLE_LOW_BOUND) {
+		mw_uint *= 10;
+		offset -= 40;
+	}
+
+	for (qdbm = 0; qdbm < QDBM_TABLE_LEN-1; qdbm++) {
+		boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm+1] - nqdBm_to_mW_map[qdbm])/2;
+		if (mw_uint < boundary) break;
+	}
+
+	qdbm += (uint8)offset;
+
+	return(qdbm);
+}
diff -urN linux.old/drivers/net/hnd/hnddma.c linux.dev/drivers/net/hnd/hnddma.c
--- linux.old/drivers/net/hnd/hnddma.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/hnddma.c	2005-11-08 16:07:38.846817500 +0100
@@ -0,0 +1,1527 @@
+/*
+ * Generic Broadcom Home Networking Division (HND) DMA module.
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmendian.h>
+#include <sbconfig.h>
+#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+
+struct dma_info;	/* forward declaration */
+#define di_t struct dma_info
+
+#include <sbhnddma.h>
+#include <hnddma.h>
+
+/* debug/trace */
+#define	DMA_ERROR(args)
+#define	DMA_TRACE(args)
+
+/* default dma message level (if input msg_level pointer is null in dma_attach()) */
+static uint dma_msg_level =
+	0;
+
+#define	MAXNAMEL	8
+
+/* dma engine software state */
+typedef struct dma_info {
+	hnddma_t	hnddma;		/* exported structure */
+	uint		*msg_level;	/* message level pointer */
+	char		name[MAXNAMEL];	/* callers name for diag msgs */
+	
+	void		*osh;		/* os handle */
+	sb_t		*sbh;		/* sb handle */
+	
+	bool		dma64;		/* dma64 enabled */
+	bool		addrext;	/* this dma engine supports DmaExtendedAddrChanges */
+	
+	dma32regs_t	*d32txregs;	/* 32 bits dma tx engine registers */
+	dma32regs_t	*d32rxregs;	/* 32 bits dma rx engine registers */
+	dma64regs_t	*d64txregs;	/* 64 bits dma tx engine registers */
+	dma64regs_t	*d64rxregs;	/* 64 bits dma rx engine registers */
+
+	uint32		dma64align;	/* either 8k or 4k depends on number of dd */
+	dma32dd_t	*txd32;		/* pointer to dma32 tx descriptor ring */
+	dma64dd_t	*txd64;		/* pointer to dma64 tx descriptor ring */
+	uint		ntxd;		/* # tx descriptors tunable */	
+	uint		txin;		/* index of next descriptor to reclaim */
+	uint		txout;		/* index of next descriptor to post */
+	uint		txavail;	/* # free tx descriptors */
+	void		**txp;		/* pointer to parallel array of pointers to packets */
+	ulong		txdpa;		/* physical address of descriptor ring */
+	uint		txdalign;	/* #bytes added to alloc'd mem to align txd */
+	uint		txdalloc;	/* #bytes allocated for the ring */
+
+	dma32dd_t	*rxd32;		/* pointer to dma32 rx descriptor ring */
+	dma64dd_t	*rxd64;		/* pointer to dma64 rx descriptor ring */
+	uint		nrxd;		/* # rx descriptors tunable */	
+	uint		rxin;		/* index of next descriptor to reclaim */
+	uint		rxout;		/* index of next descriptor to post */
+	void		**rxp;		/* pointer to parallel array of pointers to packets */
+	ulong		rxdpa;		/* physical address of descriptor ring */
+	uint		rxdalign;	/* #bytes added to alloc'd mem to align rxd */
+	uint		rxdalloc;	/* #bytes allocated for the ring */
+
+	/* tunables */
+	uint		rxbufsize;	/* rx buffer size in bytes */
+	uint		nrxpost;	/* # rx buffers to keep posted */
+	uint		rxoffset;	/* rxcontrol offset */
+	uint		ddoffsetlow;	/* add to get dma address of descriptor ring, low 32 bits */
+	uint		ddoffsethigh;	/* add to get dma address of descriptor ring, high 32 bits */
+	uint		dataoffsetlow;	/* add to get dma address of data buffer, low 32 bits */
+	uint		dataoffsethigh;	/* add to get dma address of data buffer, high 32 bits */
+} dma_info_t;
+
+#ifdef BCMDMA64
+#define	DMA64_ENAB(di)	((di)->dma64)
+#else
+#define	DMA64_ENAB(di)	(0)
+#endif
+
+/* descriptor bumping macros */
+#define	XXD(x, n)	((x) & ((n) - 1))
+#define	TXD(x)		XXD((x), di->ntxd)
+#define	RXD(x)		XXD((x), di->nrxd)
+#define	NEXTTXD(i)	TXD(i + 1)
+#define	PREVTXD(i)	TXD(i - 1)
+#define	NEXTRXD(i)	RXD(i + 1)
+#define	NTXDACTIVE(h, t)	TXD(t - h)
+#define	NRXDACTIVE(h, t)	RXD(t - h)
+
+/* macros to convert between byte offsets and indexes */
+#define	B2I(bytes, type)	((bytes) / sizeof(type))
+#define	I2B(index, type)	((index) * sizeof(type))
+
+#define	PCI32ADDR_HIGH		0xc0000000	/* address[31:30] */
+#define	PCI32ADDR_HIGH_SHIFT	30
+
+
+/* prototypes */
+static bool dma_isaddrext(dma_info_t *di);
+static bool dma_alloc(dma_info_t *di, uint direction);
+
+static bool dma32_alloc(dma_info_t *di, uint direction);
+static void dma32_txreset(dma_info_t *di);
+static void dma32_rxreset(dma_info_t *di);
+static bool dma32_txsuspendedidle(dma_info_t *di);
+static int  dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags);
+static void* dma32_getnexttxp(dma_info_t *di, bool forceall);
+static void* dma32_getnextrxp(dma_info_t *di, bool forceall);
+static void dma32_txrotate(di_t *di);
+
+/* prototype or stubs */
+#ifdef BCMDMA64
+static bool dma64_alloc(dma_info_t *di, uint direction);
+static void dma64_txreset(dma_info_t *di);
+static void dma64_rxreset(dma_info_t *di);
+static bool dma64_txsuspendedidle(dma_info_t *di);
+static int  dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags);
+static void* dma64_getnexttxp(dma_info_t *di, bool forceall);
+static void* dma64_getnextrxp(dma_info_t *di, bool forceall);
+static void dma64_txrotate(di_t *di);
+#else
+static bool dma64_alloc(dma_info_t *di, uint direction) { return TRUE; }
+static void dma64_txreset(dma_info_t *di) {}
+static void dma64_rxreset(dma_info_t *di) {}
+static bool dma64_txsuspendedidle(dma_info_t *di) { return TRUE;}
+static int  dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags) { return 0; }
+static void* dma64_getnexttxp(dma_info_t *di, bool forceall) { return NULL; }
+static void* dma64_getnextrxp(dma_info_t *di, bool forceall) { return NULL; }
+static void dma64_txrotate(di_t *di) { return; }
+#endif
+
+/* old dmaregs struct for compatibility */
+typedef volatile struct {
+	/* transmit channel */
+	uint32  xmtcontrol;         /* enable, et al */
+	uint32  xmtaddr;            /* descriptor ring base address (4K aligned) */
+	uint32  xmtptr;             /* last descriptor posted to chip */
+	uint32  xmtstatus;          /* current active descriptor, et al */
+	
+	/* receive channel */
+	uint32  rcvcontrol;         /* enable, et al */
+	uint32  rcvaddr;            /* descriptor ring base address (4K aligned) */
+	uint32  rcvptr;             /* last descriptor posted to chip */
+	uint32  rcvstatus;          /* current active descriptor, et al */
+} dmaregs_t;
+
+typedef struct {
+	uint ddoffset;
+	uint dataoffset;
+} compat_data;
+
+static compat_data *ugly_hack = NULL;
+
+void* 
+dma_attold(void *drv, void *osh, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
+		uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
+{
+	dma32regs_t *dtx = regs;
+	dma32regs_t *drx = dtx + 1;
+	
+	ugly_hack = kmalloc(sizeof(ugly_hack), GFP_KERNEL);
+	ugly_hack->ddoffset = ddoffset;
+	ugly_hack->dataoffset = dataoffset;
+	dma_attach((osl_t *) osh, name, NULL, dtx, drx, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, msg_level);
+	ugly_hack = NULL;
+}
+
+
+void* 
+dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
+	   uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level)
+{
+	dma_info_t *di;
+	uint size;
+
+	/* allocate private info structure */
+	if ((di = MALLOC(osh, sizeof (dma_info_t))) == NULL) {
+		return (NULL);
+	}
+	bzero((char*)di, sizeof (dma_info_t));
+
+	di->msg_level = msg_level ? msg_level : &dma_msg_level;
+
+	if (sbh != NULL)
+		di->dma64 = ((sb_coreflagshi(sbh, 0, 0) & SBTMH_DMA64) == SBTMH_DMA64);
+
+#ifndef BCMDMA64
+	if (di->dma64) {
+		DMA_ERROR(("dma_attach: driver doesn't have the capability to support 64 bits DMA\n"));
+		goto fail;
+	}
+#endif
+	
+	/* check arguments */
+	ASSERT(ISPOWEROF2(ntxd));
+	ASSERT(ISPOWEROF2(nrxd));
+	if (nrxd == 0)
+		ASSERT(dmaregsrx == NULL);
+	if (ntxd == 0)
+		ASSERT(dmaregstx == NULL);
+
+
+	/* init dma reg pointer */
+	if (di->dma64) {
+		ASSERT(ntxd <= D64MAXDD);
+		ASSERT(nrxd <= D64MAXDD);
+		di->d64txregs = (dma64regs_t *)dmaregstx;
+		di->d64rxregs = (dma64regs_t *)dmaregsrx;
+
+		di->dma64align = D64RINGALIGN;
+		if ((ntxd < D64MAXDD / 2) && (nrxd < D64MAXDD / 2)) {
+			/* for smaller dd table, HW relax the alignment requirement */
+			di->dma64align = D64RINGALIGN / 2;
+		}
+	} else {
+		ASSERT(ntxd <= D32MAXDD);
+		ASSERT(nrxd <= D32MAXDD);
+		di->d32txregs = (dma32regs_t *)dmaregstx;
+		di->d32rxregs = (dma32regs_t *)dmaregsrx;
+	}
+
+
+	/* make a private copy of our callers name */
+	strncpy(di->name, name, MAXNAMEL);
+	di->name[MAXNAMEL-1] = '\0';
+
+	di->osh = osh;
+	di->sbh = sbh;
+
+	/* save tunables */
+	di->ntxd = ntxd;
+	di->nrxd = nrxd;
+	di->rxbufsize = rxbufsize;
+	di->nrxpost = nrxpost;
+	di->rxoffset = rxoffset;
+
+	/* 
+	 * figure out the DMA physical address offset for dd and data 
+	 *   for old chips w/o sb, use zero
+	 *   for new chips w sb, 
+	 *     PCI/PCIE: they map silicon backplace address to zero based memory, need offset
+	 *     Other bus: use zero
+	 *     SB_BUS BIGENDIAN kludge: use sdram swapped region for data buffer, not descriptor
+	 */
+	di->ddoffsetlow = 0;
+	di->dataoffsetlow = 0;
+	if (ugly_hack != NULL) {
+		di->ddoffsetlow = ugly_hack->ddoffset;
+		di->dataoffsetlow = ugly_hack->dataoffset;
+		di->ddoffsethigh = 0;
+		di->dataoffsethigh = 0;
+	} else if (sbh != NULL) {	
+		if (sbh->bustype == PCI_BUS) {  /* for pci bus, add offset */
+			if ((sbh->buscoretype == SB_PCIE) && di->dma64){
+				di->ddoffsetlow = 0;
+				di->ddoffsethigh = SB_PCIE_DMA_H32;
+			} else {
+				di->ddoffsetlow = SB_PCI_DMA;
+				di->ddoffsethigh = 0;
+			}
+			di->dataoffsetlow =  di->ddoffsetlow;
+			di->dataoffsethigh =  di->ddoffsethigh;
+		} 
+#if defined(__mips__) && defined(IL_BIGENDIAN)
+		/* use sdram swapped region for data buffers but not dma descriptors */
+		di->dataoffsetlow = di->dataoffsetlow + SB_SDRAM_SWAPPED;
+#endif
+	}
+
+	di->addrext = ((ugly_hack == NULL) ? dma_isaddrext(di) : 0);
+
+	DMA_TRACE(("%s: dma_attach: osh %p ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", 
+		   name, osh, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, di->ddoffsetlow, di->dataoffsetlow));
+
+	/* allocate tx packet pointer vector */
+	if (ntxd) {
+		size = ntxd * sizeof (void*);
+		if ((di->txp = MALLOC(osh, size)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: out of tx memory, malloced %d bytes\n", di->name, MALLOCED(osh)));
+			goto fail;
+		}
+		bzero((char*)di->txp, size);
+	}
+
+	/* allocate rx packet pointer vector */
+	if (nrxd) {
+		size = nrxd * sizeof (void*);
+		if ((di->rxp = MALLOC(osh, size)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: out of rx memory, malloced %d bytes\n", di->name, MALLOCED(osh)));
+			goto fail;
+		}
+		bzero((char*)di->rxp, size);
+	} 
+
+	/* allocate transmit descriptor ring, only need ntxd descriptors but it must be aligned */
+	if (ntxd) {
+		if (!dma_alloc(di, DMA_TX))
+			goto fail;
+	}
+
+	/* allocate receive descriptor ring, only need nrxd descriptors but it must be aligned */
+	if (nrxd) {
+		if (!dma_alloc(di, DMA_RX))
+			goto fail;
+	}
+
+	if ((di->ddoffsetlow == SB_PCI_DMA) && (di->txdpa > SB_PCI_DMA_SZ) && !di->addrext) {
+		DMA_ERROR(("%s: dma_attach: txdpa 0x%lx: addrext not supported\n", di->name, di->txdpa));
+		goto fail;
+	}
+	if ((di->ddoffsetlow == SB_PCI_DMA) && (di->rxdpa > SB_PCI_DMA_SZ) && !di->addrext) {
+		DMA_ERROR(("%s: dma_attach: rxdpa 0x%lx: addrext not supported\n", di->name, di->rxdpa));
+		goto fail;
+	}
+
+	return ((void*)di);
+
+fail:
+	dma_detach((void*)di);
+	return (NULL);
+}
+
+static bool
+dma_alloc(dma_info_t *di, uint direction)
+{
+	if (DMA64_ENAB(di)) {
+		return dma64_alloc(di, direction);
+	} else {
+		return dma32_alloc(di, direction);
+	}
+}
+
+/* may be called with core in reset */
+void
+dma_detach(dma_info_t *di)
+{
+	if (di == NULL)
+		return;
+
+	DMA_TRACE(("%s: dma_detach\n", di->name));
+
+	/* shouldn't be here if descriptors are unreclaimed */
+	ASSERT(di->txin == di->txout);
+	ASSERT(di->rxin == di->rxout);
+
+	/* free dma descriptor rings */
+	if (di->txd32)
+		DMA_FREE_CONSISTENT(di->osh, ((int8*)di->txd32 - di->txdalign), di->txdalloc, (di->txdpa - di->txdalign));
+	if (di->rxd32)
+		DMA_FREE_CONSISTENT(di->osh, ((int8*)di->rxd32 - di->rxdalign), di->rxdalloc, (di->rxdpa - di->rxdalign));
+
+	/* free packet pointer vectors */
+	if (di->txp)
+		MFREE(di->osh, (void*)di->txp, (di->ntxd * sizeof (void*)));
+	if (di->rxp)
+		MFREE(di->osh, (void*)di->rxp, (di->nrxd * sizeof (void*)));
+
+	/* free our private info structure */
+	MFREE(di->osh, (void*)di, sizeof (dma_info_t));
+}
+
+/* return TRUE if this dma engine supports DmaExtendedAddrChanges, otherwise FALSE */
+static bool
+dma_isaddrext(dma_info_t *di)
+{
+	uint32 w;
+
+	if (DMA64_ENAB(di)) {
+		OR_REG(&di->d64txregs->control, D64_XC_AE);
+		w = R_REG(&di->d32txregs->control);
+		AND_REG(&di->d32txregs->control, ~D64_XC_AE);
+		return ((w & XC_AE) == D64_XC_AE);
+	} else {
+		OR_REG(&di->d32txregs->control, XC_AE);
+		w = R_REG(&di->d32txregs->control);
+		AND_REG(&di->d32txregs->control, ~XC_AE);
+		return ((w & XC_AE) == XC_AE);
+	}
+}
+
+void
+dma_txreset(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_txreset\n", di->name));
+
+	if (DMA64_ENAB(di))
+		dma64_txreset(di);
+	else
+		dma32_txreset(di);
+}
+
+void
+dma_rxreset(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_rxreset\n", di->name));
+
+	if (DMA64_ENAB(di))
+		dma64_rxreset(di);
+	else
+		dma32_rxreset(di);
+}
+
+/* initialize descriptor table base address */
+static void
+dma_ddtable_init(dma_info_t *di, uint direction, ulong pa)
+{
+	if (DMA64_ENAB(di)) {
+		if (direction == DMA_TX) {
+			W_REG(&di->d64txregs->addrlow, pa + di->ddoffsetlow);
+			W_REG(&di->d64txregs->addrhigh, di->ddoffsethigh);
+		} else {
+			W_REG(&di->d64rxregs->addrlow, pa + di->ddoffsetlow);
+			W_REG(&di->d64rxregs->addrhigh, di->ddoffsethigh);
+		}
+	} else {
+		uint32 offset = di->ddoffsetlow;
+		if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
+			if (direction == DMA_TX)	
+				W_REG(&di->d32txregs->addr, (pa + offset));
+			else
+				W_REG(&di->d32rxregs->addr, (pa + offset));
+		} else {        
+			/* dma32 address extension */
+			uint32 ae;
+			ASSERT(di->addrext);
+			ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
+	
+			if (direction == DMA_TX) {
+				W_REG(&di->d32txregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset));
+				SET_REG(&di->d32txregs->control, XC_AE, (ae << XC_AE_SHIFT));
+			} else {
+				W_REG(&di->d32rxregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset));
+				SET_REG(&di->d32rxregs->control, RC_AE, (ae << RC_AE_SHIFT));
+			}
+		}
+	}
+}
+
+/* init the tx or rx descriptor */
+static INLINE void
+dma32_dd_upd(dma_info_t *di, dma32dd_t *ddring, ulong pa, uint outidx, uint32 *ctrl)
+{
+	uint offset = di->dataoffsetlow;
+
+	if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
+		W_SM(&ddring[outidx].addr, BUS_SWAP32(pa + offset));
+		W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl));
+	} else {        
+		/* address extension */
+		uint32 ae;
+		ASSERT(di->addrext);
+		ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
+
+		*ctrl |= (ae << CTRL_AE_SHIFT);
+		W_SM(&ddring[outidx].addr, BUS_SWAP32((pa & ~PCI32ADDR_HIGH) + offset));
+		W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl));
+	}
+}
+
+/* init the tx or rx descriptor */
+static INLINE void
+dma64_dd_upd(dma_info_t *di, dma64dd_t *ddring, ulong pa, uint outidx, uint32 *flags, uint32 bufcount)
+{
+	uint32 bufaddr_low = pa + di->dataoffsetlow;
+	uint32 bufaddr_high = 0 + di->dataoffsethigh;
+
+	uint32 ctrl2 = bufcount & D64_CTRL2_BC_MASK;
+
+	W_SM(&ddring[outidx].addrlow, BUS_SWAP32(bufaddr_low));
+	W_SM(&ddring[outidx].addrhigh, BUS_SWAP32(bufaddr_high));
+	W_SM(&ddring[outidx].ctrl1, BUS_SWAP32(*flags));
+	W_SM(&ddring[outidx].ctrl2, BUS_SWAP32(ctrl2));
+}
+
+void
+dma_txinit(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_txinit\n", di->name));
+
+	di->txin = di->txout = 0;
+	di->txavail = di->ntxd - 1;
+
+	/* clear tx descriptor ring */
+	if (DMA64_ENAB(di)) {
+		BZERO_SM((void*)di->txd64, (di->ntxd * sizeof (dma64dd_t)));
+		W_REG(&di->d64txregs->control, XC_XE);
+		dma_ddtable_init(di, DMA_TX, di->txdpa);
+	} else {
+		BZERO_SM((void*)di->txd32, (di->ntxd * sizeof (dma32dd_t)));
+		W_REG(&di->d32txregs->control, XC_XE);
+		dma_ddtable_init(di, DMA_TX, di->txdpa);
+	}
+}
+
+bool
+dma_txenabled(dma_info_t *di)
+{
+	uint32 xc;
+	
+	/* If the chip is dead, it is not enabled :-) */
+	if (DMA64_ENAB(di)) {
+		xc = R_REG(&di->d64txregs->control);
+		return ((xc != 0xffffffff) && (xc & D64_XC_XE));
+	} else {
+		xc = R_REG(&di->d32txregs->control);
+		return ((xc != 0xffffffff) && (xc & XC_XE));
+	}
+}
+
+void
+dma_txsuspend(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_txsuspend\n", di->name));
+	if (DMA64_ENAB(di))
+		OR_REG(&di->d64txregs->control, D64_XC_SE);
+	else
+		OR_REG(&di->d32txregs->control, XC_SE);
+}
+
+void
+dma_txresume(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_txresume\n", di->name));
+	if (DMA64_ENAB(di))
+		AND_REG(&di->d64txregs->control, ~D64_XC_SE);
+	else
+		AND_REG(&di->d32txregs->control, ~XC_SE);
+}
+
+bool
+dma_txsuspendedidle(dma_info_t *di)
+{
+	if (DMA64_ENAB(di))
+		return dma64_txsuspendedidle(di);
+	else
+		return dma32_txsuspendedidle(di);
+}
+
+bool
+dma_txsuspended(dma_info_t *di)
+{
+	if (DMA64_ENAB(di))
+		return ((R_REG(&di->d64txregs->control) & D64_XC_SE) == D64_XC_SE);
+	else
+		return ((R_REG(&di->d32txregs->control) & XC_SE) == XC_SE);
+}
+
+bool
+dma_txstopped(dma_info_t *di)
+{
+	if (DMA64_ENAB(di))
+		return ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_STOPPED);
+	else
+		return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_STOPPED);
+}
+
+bool
+dma_rxstopped(dma_info_t *di)
+{
+	if (DMA64_ENAB(di))
+		return ((R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK) == D64_RS0_RS_STOPPED);
+	else
+		return ((R_REG(&di->d32rxregs->status) & RS_RS_MASK) == RS_RS_STOPPED);
+}
+
+void
+dma_fifoloopbackenable(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
+	if (DMA64_ENAB(di))
+		OR_REG(&di->d64txregs->control, D64_XC_LE);
+	else
+		OR_REG(&di->d32txregs->control, XC_LE);
+}
+
+void
+dma_rxinit(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_rxinit\n", di->name));
+
+	di->rxin = di->rxout = 0;
+
+	/* clear rx descriptor ring */
+	if (DMA64_ENAB(di)) {
+                BZERO_SM((void*)di->rxd64, (di->nrxd * sizeof (dma64dd_t)));
+		dma_rxenable(di);
+		dma_ddtable_init(di, DMA_RX, di->rxdpa);
+	} else {
+		BZERO_SM((void*)di->rxd32, (di->nrxd * sizeof (dma32dd_t)));
+		dma_rxenable(di);
+		dma_ddtable_init(di, DMA_RX, di->rxdpa);
+	}
+}
+
+void
+dma_rxenable(dma_info_t *di)
+{
+	DMA_TRACE(("%s: dma_rxenable\n", di->name));
+	if (DMA64_ENAB(di))
+		W_REG(&di->d64rxregs->control, ((di->rxoffset << D64_RC_RO_SHIFT) | D64_RC_RE));
+	else
+		W_REG(&di->d32rxregs->control, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
+}
+
+bool
+dma_rxenabled(dma_info_t *di)
+{
+	uint32 rc;
+
+	if (DMA64_ENAB(di)) { 
+		rc = R_REG(&di->d64rxregs->control);
+		return ((rc != 0xffffffff) && (rc & D64_RC_RE));
+	} else {
+		rc = R_REG(&di->d32rxregs->control);
+		return ((rc != 0xffffffff) && (rc & RC_RE));
+	}
+}
+
+
+/* !! tx entry routine */
+int
+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
+{
+	if (DMA64_ENAB(di)) { 
+		return dma64_txfast(di, p0, coreflags);
+	} else {
+		return dma32_txfast(di, p0, coreflags);
+	}
+}
+
+/* !! rx entry routine, returns a pointer to the next frame received, or NULL if there are no more */
+void*
+dma_rx(dma_info_t *di)
+{
+	void *p;
+	uint len;
+	int skiplen = 0;
+
+	while ((p = dma_getnextrxp(di, FALSE))) {
+		/* skip giant packets which span multiple rx descriptors */
+		if (skiplen > 0) {
+			skiplen -= di->rxbufsize;
+			if (skiplen < 0)
+				skiplen = 0;
+			PKTFREE(di->osh, p, FALSE);
+			continue;
+		}
+
+		len = ltoh16(*(uint16*)(PKTDATA(di->osh, p)));
+		DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
+
+		/* bad frame length check */
+		if (len > (di->rxbufsize - di->rxoffset)) {
+			DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
+			if (len > 0)
+				skiplen = len - (di->rxbufsize - di->rxoffset);
+			PKTFREE(di->osh, p, FALSE);
+			di->hnddma.rxgiants++;
+			continue;
+		}
+
+		/* set actual length */
+		PKTSETLEN(di->osh, p, (di->rxoffset + len));
+
+		break;
+	}
+
+	return (p);
+}
+
+/* post receive buffers */
+void
+dma_rxfill(dma_info_t *di)
+{
+	void *p;
+	uint rxin, rxout;
+	uint32 ctrl;
+	uint n;
+	uint i;
+	uint32 pa;
+	uint rxbufsize;
+
+	/*
+	 * Determine how many receive buffers we're lacking
+	 * from the full complement, allocate, initialize,
+	 * and post them, then update the chip rx lastdscr.
+	 */
+
+	rxin = di->rxin;
+	rxout = di->rxout;
+	rxbufsize = di->rxbufsize;
+
+	n = di->nrxpost - NRXDACTIVE(rxin, rxout);
+
+	DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
+
+	for (i = 0; i < n; i++) {
+		if ((p = PKTGET(di->osh, rxbufsize, FALSE)) == NULL) {
+			DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
+			di->hnddma.rxnobuf++;
+			break;
+		}
+
+		/* Do a cached write instead of uncached write since DMA_MAP
+		 * will flush the cache. */
+		*(uint32*)(PKTDATA(di->osh, p)) = 0;
+
+		pa = (uint32) DMA_MAP(di->osh, PKTDATA(di->osh, p), rxbufsize, DMA_RX, p);
+		ASSERT(ISALIGNED(pa, 4));
+
+		/* save the free packet pointer */
+		ASSERT(di->rxp[rxout] == NULL);
+		di->rxp[rxout] = p;
+
+		if (DMA64_ENAB(di)) {
+			/* prep the descriptor control value */
+			if (rxout == (di->nrxd - 1))
+				ctrl = CTRL_EOT;
+
+			dma64_dd_upd(di, di->rxd64, pa, rxout, &ctrl, rxbufsize);
+		} else {
+			/* prep the descriptor control value */
+			ctrl = rxbufsize;
+			if (rxout == (di->nrxd - 1))
+				ctrl |= CTRL_EOT;
+			dma32_dd_upd(di, di->rxd32, pa, rxout, &ctrl);
+		}
+
+		rxout = NEXTRXD(rxout);
+	}
+
+	di->rxout = rxout;
+
+	/* update the chip lastdscr pointer */
+	if (DMA64_ENAB(di)) {
+		W_REG(&di->d64rxregs->ptr, I2B(rxout, dma64dd_t));
+	} else {
+		W_REG(&di->d32rxregs->ptr, I2B(rxout, dma32dd_t));
+	}
+}
+
+void
+dma_txreclaim(dma_info_t *di, bool forceall)
+{
+	void *p;
+
+	DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
+
+	while ((p = dma_getnexttxp(di, forceall)))
+		PKTFREE(di->osh, p, TRUE);
+}
+
+/*
+ * Reclaim next completed txd (txds if using chained buffers) and
+ * return associated packet.
+ * If 'force' is true, reclaim txd(s) and return associated packet
+ * regardless of the value of the hardware "curr" pointer.
+ */
+void*
+dma_getnexttxp(dma_info_t *di, bool forceall)
+{
+	if (DMA64_ENAB(di)) {
+		return dma64_getnexttxp(di, forceall);
+	} else {
+		return dma32_getnexttxp(di, forceall);
+	}
+}
+	
+/* like getnexttxp but no reclaim */
+void*
+dma_peeknexttxp(dma_info_t *di)
+{
+	uint end, i;
+
+	if (DMA64_ENAB(di)) {
+		end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t);
+	} else {
+		end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
+	}
+
+	for (i = di->txin; i != end; i = NEXTTXD(i))
+		if (di->txp[i])
+			return (di->txp[i]);
+
+	return (NULL);
+}
+
+/*
+ * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin).
+ */
+void
+dma_txrotate(di_t *di)
+{
+	if (DMA64_ENAB(di)) {
+		dma64_txrotate(di);
+	} else {
+		dma32_txrotate(di);
+	}
+}
+
+void
+dma_rxreclaim(dma_info_t *di)
+{
+	void *p;
+
+	DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
+
+	while ((p = dma_getnextrxp(di, TRUE)))
+		PKTFREE(di->osh, p, FALSE);
+}
+
+void *
+dma_getnextrxp(dma_info_t *di, bool forceall)
+{
+	if (DMA64_ENAB(di)) {
+		return dma64_getnextrxp(di, forceall);
+	} else {
+		return dma32_getnextrxp(di, forceall);
+	}
+}
+
+uintptr
+dma_getvar(dma_info_t *di, char *name)
+{
+	if (!strcmp(name, "&txavail"))
+		return ((uintptr) &di->txavail);
+	else {
+		ASSERT(0);
+	}
+	return (0);
+}
+
+void
+dma_txblock(dma_info_t *di)
+{
+	di->txavail = 0;
+}
+
+void
+dma_txunblock(dma_info_t *di)
+{
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+}
+
+uint
+dma_txactive(dma_info_t *di)
+{
+	return (NTXDACTIVE(di->txin, di->txout));
+}
+	
+void
+dma_rxpiomode(dma32regs_t *regs)
+{
+	W_REG(&regs->control, RC_FM);
+}
+
+void
+dma_txpioloopback(dma32regs_t *regs)
+{
+	OR_REG(&regs->control, XC_LE);
+}
+
+
+
+
+/*** 32 bits DMA non-inline functions ***/
+static bool
+dma32_alloc(dma_info_t *di, uint direction)
+{
+	uint size;
+	uint ddlen;
+	void *va;
+
+	ddlen = sizeof (dma32dd_t);
+
+	size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen);
+
+	if (!ISALIGNED(DMA_CONSISTENT_ALIGN, D32RINGALIGN))
+		size += D32RINGALIGN;
+
+
+	if (direction == DMA_TX) {
+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name));
+			return FALSE;
+		}
+
+		di->txd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN);
+		di->txdalign = (uint)((int8*)di->txd32 - (int8*)va);
+		di->txdpa += di->txdalign;
+		di->txdalloc = size;
+		ASSERT(ISALIGNED((uintptr)di->txd32, D32RINGALIGN));
+	} else {
+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name));
+			return FALSE;
+		}
+		di->rxd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN);
+		di->rxdalign = (uint)((int8*)di->rxd32 - (int8*)va);
+		di->rxdpa += di->rxdalign;
+		di->rxdalloc = size;
+		ASSERT(ISALIGNED((uintptr)di->rxd32, D32RINGALIGN));
+	}
+
+	return TRUE;
+}
+
+static void 
+dma32_txreset(dma_info_t *di)
+{
+	uint32 status;
+
+	/* suspend tx DMA first */
+	W_REG(&di->d32txregs->control, XC_SE);
+	SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED &&
+		 status != XS_XS_IDLE &&
+		 status != XS_XS_STOPPED,
+		 10000);
+
+	W_REG(&di->d32txregs->control, 0);
+	SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED,
+		 10000);
+
+	if (status != XS_XS_DISABLED) {
+		DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
+	}
+
+	/* wait for the last transaction to complete */
+	OSL_DELAY(300);
+}
+
+static void 
+dma32_rxreset(dma_info_t *di)
+{
+	uint32 status;
+
+	W_REG(&di->d32rxregs->control, 0);
+	SPINWAIT((status = (R_REG(&di->d32rxregs->status) & RS_RS_MASK)) != RS_RS_DISABLED,
+		 10000);
+
+	if (status != RS_RS_DISABLED) {
+		DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
+	}
+}
+
+static bool
+dma32_txsuspendedidle(dma_info_t *di)
+{
+	if (!(R_REG(&di->d32txregs->control) & XC_SE))
+		return 0;
+	
+	if ((R_REG(&di->d32txregs->status) & XS_XS_MASK) != XS_XS_IDLE)
+		return 0;
+
+	OSL_DELAY(2);
+	return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_IDLE);
+}
+
+/*
+ * supports full 32bit dma engine buffer addressing so
+ * dma buffers can cross 4 Kbyte page boundaries.
+ */
+static int
+dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags)
+{
+	void *p, *next;
+	uchar *data;
+	uint len;
+	uint txout;
+	uint32 ctrl;
+	uint32 pa;	
+
+	DMA_TRACE(("%s: dma_txfast\n", di->name));
+
+	txout = di->txout;
+	ctrl = 0;
+
+	/*
+	 * Walk the chain of packet buffers
+	 * allocating and initializing transmit descriptor entries.
+	 */
+	for (p = p0; p; p = next) {
+		data = PKTDATA(di->osh, p);
+		len = PKTLEN(di->osh, p);
+		next = PKTNEXT(di->osh, p);
+
+		/* return nonzero if out of tx descriptors */
+		if (NEXTTXD(txout) == di->txin)
+			goto outoftxd;
+
+		if (len == 0)
+			continue;
+
+		/* get physical address of buffer start */
+		pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p);
+
+		/* build the descriptor control value */
+		ctrl = len & CTRL_BC_MASK;
+
+		ctrl |= coreflags;
+		
+		if (p == p0)
+			ctrl |= CTRL_SOF;
+		if (next == NULL)
+			ctrl |= (CTRL_IOC | CTRL_EOF);
+		if (txout == (di->ntxd - 1))
+			ctrl |= CTRL_EOT;
+
+		if (DMA64_ENAB(di)) {
+			dma64_dd_upd(di, di->txd64, pa, txout, &ctrl, len);
+		} else {
+			dma32_dd_upd(di, di->txd32, pa, txout, &ctrl);
+		}
+
+		ASSERT(di->txp[txout] == NULL);
+
+		txout = NEXTTXD(txout);
+	}
+
+	/* if last txd eof not set, fix it */
+	if (!(ctrl & CTRL_EOF))
+		W_SM(&di->txd32[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
+	/* save the packet */
+	di->txp[PREVTXD(txout)] = p0;
+
+	/* bump the tx descriptor index */
+	di->txout = txout;
+
+	/* kick the chip */
+	if (DMA64_ENAB(di)) {
+		W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t));
+	} else {
+		W_REG(&di->d32txregs->ptr, I2B(txout, dma32dd_t));
+	}
+
+	/* tx flow control */
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	return (0);
+
+ outoftxd:
+	DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
+	PKTFREE(di->osh, p0, TRUE);
+	di->txavail = 0;
+	di->hnddma.txnobuf++;
+	return (-1);
+}
+
+static void*
+dma32_getnexttxp(dma_info_t *di, bool forceall)
+{
+	uint start, end, i;
+	void *txp;
+
+	DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
+
+	txp = NULL;
+
+	start = di->txin;
+	if (forceall)
+		end = di->txout;
+	else
+		end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
+
+	if ((start == 0) && (end > di->txout))
+		goto bogus;
+
+	for (i = start; i != end && !txp; i = NEXTTXD(i)) {
+		DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd32[i].addr)) - di->dataoffsetlow),
+			  (BUS_SWAP32(R_SM(&di->txd32[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
+
+		W_SM(&di->txd32[i].addr, 0xdeadbeef);
+		txp = di->txp[i];
+		di->txp[i] = NULL;
+	}
+
+	di->txin = i;
+
+	/* tx flow control */
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	return (txp);
+
+bogus:
+/*
+	DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
+		start, end, di->txout, forceall));
+*/
+	return (NULL);
+}
+
+static void *
+dma32_getnextrxp(dma_info_t *di, bool forceall)
+{
+	uint i;
+	void *rxp;
+
+	/* if forcing, dma engine must be disabled */
+	ASSERT(!forceall || !dma_rxenabled(di));
+
+	i = di->rxin;
+
+	/* return if no packets posted */
+	if (i == di->rxout)
+		return (NULL);
+
+	/* ignore curr if forceall */
+	if (!forceall && (i == B2I(R_REG(&di->d32rxregs->status) & RS_CD_MASK, dma32dd_t)))
+		return (NULL);
+
+	/* get the packet pointer that corresponds to the rx descriptor */
+	rxp = di->rxp[i];
+	ASSERT(rxp);
+	di->rxp[i] = NULL;
+
+	/* clear this packet from the descriptor ring */
+	DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd32[i].addr)) - di->dataoffsetlow),
+		  di->rxbufsize, DMA_RX, rxp);
+	W_SM(&di->rxd32[i].addr, 0xdeadbeef);
+
+	di->rxin = NEXTRXD(i);
+
+	return (rxp);
+}
+
+static void
+dma32_txrotate(di_t *di)
+{
+	uint ad;
+	uint nactive;
+	uint rot;
+	uint old, new;
+	uint32 w;
+	uint first, last;
+
+	ASSERT(dma_txsuspendedidle(di));
+
+	nactive = dma_txactive(di);
+	ad = B2I(((R_REG(&di->d32txregs->status) & XS_AD_MASK) >> XS_AD_SHIFT), dma32dd_t);
+	rot = TXD(ad - di->txin);
+
+	ASSERT(rot < di->ntxd);
+
+	/* full-ring case is a lot harder - don't worry about this */
+	if (rot >= (di->ntxd - nactive)) {
+		DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name));
+		return;
+	}
+
+	first = di->txin;
+	last = PREVTXD(di->txout);
+
+	/* move entries starting at last and moving backwards to first */
+	for (old = last; old != PREVTXD(first); old = PREVTXD(old)) {
+		new = TXD(old + rot);
+
+		/*
+		 * Move the tx dma descriptor.
+		 * EOT is set only in the last entry in the ring.
+		 */
+		w = R_SM(&di->txd32[old].ctrl) & ~CTRL_EOT;
+		if (new == (di->ntxd - 1))
+			w |= CTRL_EOT;
+		W_SM(&di->txd32[new].ctrl, w);
+		W_SM(&di->txd32[new].addr, R_SM(&di->txd32[old].addr));
+
+		/* zap the old tx dma descriptor address field */
+		W_SM(&di->txd32[old].addr, 0xdeadbeef);
+
+		/* move the corresponding txp[] entry */
+		ASSERT(di->txp[new] == NULL);
+		di->txp[new] = di->txp[old];
+		di->txp[old] = NULL;
+	}
+
+	/* update txin and txout */
+	di->txin = ad;
+	di->txout = TXD(di->txout + rot);
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	/* kick the chip */
+	W_REG(&di->d32txregs->ptr, I2B(di->txout, dma32dd_t));
+}
+
+/*** 64 bits DMA non-inline functions ***/
+
+#ifdef BCMDMA64
+
+static bool
+dma64_alloc(dma_info_t *di, uint direction)
+{
+	uint size;
+	uint ddlen;
+	uint32 alignbytes;
+	void *va;
+
+	ddlen = sizeof (dma64dd_t);
+
+	size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen);
+
+	alignbytes = di->dma64align;
+
+	if (!ISALIGNED(DMA_CONSISTENT_ALIGN, alignbytes))
+		size += alignbytes;
+
+
+	if (direction == DMA_TX) {
+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name));
+			return FALSE;
+		}
+
+		di->txd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes);
+		di->txdalign = (uint)((int8*)di->txd64 - (int8*)va);
+		di->txdpa += di->txdalign;
+		di->txdalloc = size;
+		ASSERT(ISALIGNED((uintptr)di->txd64, alignbytes));
+	} else {
+		if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) {
+			DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name));
+			return FALSE;
+		}
+		di->rxd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes);
+		di->rxdalign = (uint)((int8*)di->rxd64 - (int8*)va);
+		di->rxdpa += di->rxdalign;
+		di->rxdalloc = size;
+		ASSERT(ISALIGNED((uintptr)di->rxd64, alignbytes));
+	}
+
+	return TRUE;
+}
+
+static void 
+dma64_txreset(dma_info_t *di)
+{
+	uint32 status;
+
+	/* suspend tx DMA first */
+	W_REG(&di->d64txregs->control, D64_XC_SE);
+	SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED &&
+		 status != D64_XS0_XS_IDLE &&
+		 status != D64_XS0_XS_STOPPED,
+		 10000);
+
+	W_REG(&di->d64txregs->control, 0);
+	SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED,
+		 10000);
+
+	if (status != D64_XS0_XS_DISABLED) {
+		DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
+	}
+
+	/* wait for the last transaction to complete */
+	OSL_DELAY(300);
+}
+
+static void 
+dma64_rxreset(dma_info_t *di)
+{
+	uint32 status;
+
+	W_REG(&di->d64rxregs->control, 0);
+	SPINWAIT((status = (R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK)) != D64_RS0_RS_DISABLED,
+		 10000);
+
+	if (status != D64_RS0_RS_DISABLED) {
+		DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
+	}
+}
+
+static bool
+dma64_txsuspendedidle(dma_info_t *di)
+{
+
+	if (!(R_REG(&di->d64txregs->control) & D64_XC_SE))
+		return 0;
+	
+	if ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_IDLE)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * supports full 32bit dma engine buffer addressing so
+ * dma buffers can cross 4 Kbyte page boundaries.
+ */
+static int
+dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags)
+{
+	void *p, *next;
+	uchar *data;
+	uint len;
+	uint txout;
+	uint32 flags;
+	uint32 pa;	
+
+	DMA_TRACE(("%s: dma_txfast\n", di->name));
+
+	txout = di->txout;
+	flags = 0;
+
+	/*
+	 * Walk the chain of packet buffers
+	 * allocating and initializing transmit descriptor entries.
+	 */
+	for (p = p0; p; p = next) {
+		data = PKTDATA(di->osh, p);
+		len = PKTLEN(di->osh, p);
+		next = PKTNEXT(di->osh, p);
+
+		/* return nonzero if out of tx descriptors */
+		if (NEXTTXD(txout) == di->txin)
+			goto outoftxd;
+
+		if (len == 0)
+			continue;
+
+		/* get physical address of buffer start */
+		pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p);
+
+		flags = coreflags;
+		
+		if (p == p0)
+			flags |= D64_CTRL1_SOF;
+		if (next == NULL)
+			flags |= (D64_CTRL1_IOC | D64_CTRL1_EOF);
+		if (txout == (di->ntxd - 1))
+			flags |= D64_CTRL1_EOT;
+
+		dma64_dd_upd(di, di->txd64, pa, txout, &flags, len);
+
+		ASSERT(di->txp[txout] == NULL);
+
+		txout = NEXTTXD(txout);
+	}
+
+	/* if last txd eof not set, fix it */
+	if (!(flags & D64_CTRL1_EOF))
+		W_SM(&di->txd64[PREVTXD(txout)].ctrl1, BUS_SWAP32(flags | D64_CTRL1_IOC | D64_CTRL1_EOF));
+
+	/* save the packet */
+	di->txp[PREVTXD(txout)] = p0;
+
+	/* bump the tx descriptor index */
+	di->txout = txout;
+
+	/* kick the chip */
+	W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t));
+
+	/* tx flow control */
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	return (0);
+
+outoftxd:
+	DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
+	PKTFREE(di->osh, p0, TRUE);
+	di->txavail = 0;
+	di->hnddma.txnobuf++;
+	return (-1);
+}
+
+static void*
+dma64_getnexttxp(dma_info_t *di, bool forceall)
+{
+	uint start, end, i;
+	void *txp;
+
+	DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
+
+	txp = NULL;
+
+	start = di->txin;
+	if (forceall)
+		end = di->txout;
+	else
+		end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t);
+
+	if ((start == 0) && (end > di->txout))
+		goto bogus;
+
+	for (i = start; i != end && !txp; i = NEXTTXD(i)) {
+		DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd64[i].addrlow)) - di->dataoffsetlow),
+			  (BUS_SWAP32(R_SM(&di->txd64[i].ctrl2)) & D64_CTRL2_BC_MASK), DMA_TX, di->txp[i]);
+
+		W_SM(&di->txd64[i].addrlow, 0xdeadbeef);
+		W_SM(&di->txd64[i].addrhigh, 0xdeadbeef);
+
+		txp = di->txp[i];
+		di->txp[i] = NULL;
+	}
+
+	di->txin = i;
+
+	/* tx flow control */
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	return (txp);
+
+bogus:
+/*
+	DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
+		start, end, di->txout, forceall));
+*/
+	return (NULL);
+}
+
+static void *
+dma64_getnextrxp(dma_info_t *di, bool forceall)
+{
+	uint i;
+	void *rxp;
+
+	/* if forcing, dma engine must be disabled */
+	ASSERT(!forceall || !dma_rxenabled(di));
+
+	i = di->rxin;
+
+	/* return if no packets posted */
+	if (i == di->rxout)
+		return (NULL);
+
+	/* ignore curr if forceall */
+	if (!forceall && (i == B2I(R_REG(&di->d64rxregs->status0) & D64_RS0_CD_MASK, dma64dd_t)))
+		return (NULL);
+
+	/* get the packet pointer that corresponds to the rx descriptor */
+	rxp = di->rxp[i];
+	ASSERT(rxp);
+	di->rxp[i] = NULL;
+
+	/* clear this packet from the descriptor ring */
+	DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd64[i].addrlow)) - di->dataoffsetlow),
+		  di->rxbufsize, DMA_RX, rxp);
+
+	W_SM(&di->rxd64[i].addrlow, 0xdeadbeef);
+	W_SM(&di->rxd64[i].addrhigh, 0xdeadbeef);
+
+	di->rxin = NEXTRXD(i);
+
+	return (rxp);
+}
+
+static void
+dma64_txrotate(di_t *di)
+{
+	uint ad;
+	uint nactive;
+	uint rot;
+	uint old, new;
+	uint32 w;
+	uint first, last;
+
+	ASSERT(dma_txsuspendedidle(di));
+
+	nactive = dma_txactive(di);
+	ad = B2I((R_REG(&di->d64txregs->status1) & D64_XS1_AD_MASK), dma64dd_t);
+	rot = TXD(ad - di->txin);
+
+	ASSERT(rot < di->ntxd);
+
+	/* full-ring case is a lot harder - don't worry about this */
+	if (rot >= (di->ntxd - nactive)) {
+		DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name));
+		return;
+	}
+
+	first = di->txin;
+	last = PREVTXD(di->txout);
+
+	/* move entries starting at last and moving backwards to first */
+	for (old = last; old != PREVTXD(first); old = PREVTXD(old)) {
+		new = TXD(old + rot);
+
+		/*
+		 * Move the tx dma descriptor.
+		 * EOT is set only in the last entry in the ring.
+		 */
+		w = R_SM(&di->txd64[old].ctrl1) & ~D64_CTRL1_EOT;
+		if (new == (di->ntxd - 1))
+			w |= D64_CTRL1_EOT;
+		W_SM(&di->txd64[new].ctrl1, w);
+
+		w = R_SM(&di->txd64[old].ctrl2);
+		W_SM(&di->txd64[new].ctrl2, w);
+
+		W_SM(&di->txd64[new].addrlow, R_SM(&di->txd64[old].addrlow));
+		W_SM(&di->txd64[new].addrhigh, R_SM(&di->txd64[old].addrhigh));
+
+		/* zap the old tx dma descriptor address field */
+		W_SM(&di->txd64[old].addrlow, 0xdeadbeef);
+		W_SM(&di->txd64[old].addrhigh, 0xdeadbeef);
+
+		/* move the corresponding txp[] entry */
+		ASSERT(di->txp[new] == NULL);
+		di->txp[new] = di->txp[old];
+		di->txp[old] = NULL;
+	}
+
+	/* update txin and txout */
+	di->txin = ad;
+	di->txout = TXD(di->txout + rot);
+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+	/* kick the chip */
+	W_REG(&di->d64txregs->ptr, I2B(di->txout, dma64dd_t));
+}
+
+#endif
+
diff -urN linux.old/drivers/net/hnd/linux_osl.c linux.dev/drivers/net/hnd/linux_osl.c
--- linux.old/drivers/net/hnd/linux_osl.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/linux_osl.c	2005-11-07 23:38:26.782893500 +0100
@@ -0,0 +1,708 @@
+/*
+ * Linux OS Independent Layer
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#define LINUX_OSL
+
+#include <typedefs.h>
+#include <bcmendian.h>
+#include <linux/module.h>
+#include <linuxver.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <linux/delay.h>
+#ifdef mips
+#include <asm/paccess.h>
+#endif
+#include <pcicfg.h>
+
+#define PCI_CFG_RETRY 		10	
+
+#define OS_HANDLE_MAGIC		0x1234abcd
+#define BCM_MEM_FILENAME_LEN 	24
+
+typedef struct bcm_mem_link {
+	struct bcm_mem_link *prev;
+	struct bcm_mem_link *next;
+	uint	size;
+	int	line;
+	char	file[BCM_MEM_FILENAME_LEN];
+} bcm_mem_link_t;
+
+struct os_handle {
+	uint magic;
+	void *pdev;
+	uint malloced;
+	uint failed;
+	bcm_mem_link_t *dbgmem_list;
+};
+
+static int16 linuxbcmerrormap[] =  \
+{	0, 			/* 0 */
+	-EINVAL,		/* BCME_ERROR */
+	-EINVAL,		/* BCME_BADARG*/
+	-EINVAL,		/* BCME_BADOPTION*/
+	-EINVAL,		/* BCME_NOTUP */
+	-EINVAL,		/* BCME_NOTDOWN */
+	-EINVAL,		/* BCME_NOTAP */
+	-EINVAL,		/* BCME_NOTSTA */
+	-EINVAL,		/* BCME_BADKEYIDX */
+	-EINVAL,		/* BCME_RADIOOFF */
+	-EINVAL,		/* BCME_NOTBANDLOCKED */
+	-EINVAL, 		/* BCME_NOCLK */
+	-EINVAL, 		/* BCME_BADRATESET */
+	-EINVAL, 		/* BCME_BADBAND */
+	-E2BIG,			/* BCME_BUFTOOSHORT */
+	-E2BIG,			/* BCME_BUFTOOLONG */
+	-EBUSY, 		/* BCME_BUSY */
+	-EINVAL, 		/* BCME_NOTASSOCIATED */
+	-EINVAL, 		/* BCME_BADSSIDLEN */
+	-EINVAL, 		/* BCME_OUTOFRANGECHAN */
+	-EINVAL, 		/* BCME_BADCHAN */
+	-EFAULT, 		/* BCME_BADADDR */
+	-ENOMEM, 		/* BCME_NORESOURCE */
+	-EOPNOTSUPP,		/* BCME_UNSUPPORTED */
+	-EMSGSIZE,		/* BCME_BADLENGTH */
+	-EINVAL,		/* BCME_NOTREADY */
+	-EPERM,			/* BCME_NOTPERMITTED */
+	-ENOMEM, 		/* BCME_NOMEM */
+	-EINVAL, 		/* BCME_ASSOCIATED */
+	-ERANGE, 		/* BCME_RANGE */
+	-EINVAL 		/* BCME_NOTFOUND */
+}; 
+
+/* translate bcmerrors into linux errors*/
+int 
+osl_error(int bcmerror)
+{
+	int abs_bcmerror;
+	int array_size = ARRAYSIZE(linuxbcmerrormap); 
+	
+	abs_bcmerror = ABS(bcmerror);	
+
+	if (bcmerror > 0)
+		abs_bcmerror = 0;
+
+ 	else if (abs_bcmerror >= array_size)
+		abs_bcmerror = BCME_ERROR;
+
+	return linuxbcmerrormap[abs_bcmerror];
+}
+
+osl_t *
+osl_attach(void *pdev)
+{
+	osl_t *osh;
+
+	osh = kmalloc(sizeof(osl_t), GFP_ATOMIC);
+	ASSERT(osh);
+
+	/* 
+	 * check the cases where 
+	 * 1.Error code Added to bcmerror table, but forgot to add it to the OS 
+	 * dependent error code
+	 * 2. Error code is added to the bcmerror table, but forgot to add the 
+	 * corresponding errorstring(dummy call to bcmerrorstr)
+	 */
+	bcmerrorstr(0);
+	ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(linuxbcmerrormap) - 1));
+
+	osh->magic = OS_HANDLE_MAGIC;
+	osh->malloced = 0;
+	osh->failed = 0;
+	osh->dbgmem_list = NULL;
+	osh->pdev = pdev;
+
+	return osh;
+}
+
+void
+osl_detach(osl_t *osh)
+{
+	ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC));
+	kfree(osh);
+}
+
+void*
+osl_pktget(osl_t *osh, uint len, bool send)
+{
+	struct sk_buff *skb;
+
+	if ((skb = dev_alloc_skb(len)) == NULL)
+		return (NULL);
+
+	skb_put(skb, len);
+
+	/* ensure the cookie field is cleared */ 
+	PKTSETCOOKIE(skb, NULL);
+
+	return ((void*) skb);
+}
+
+void
+osl_pktfree(void *p)
+{
+	struct sk_buff *skb, *nskb;
+
+	skb = (struct sk_buff*) p;
+
+	/* perversion: we use skb->next to chain multi-skb packets */
+	while (skb) {
+		nskb = skb->next;
+		skb->next = NULL;
+		if (skb->destructor) {
+			/* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
+			dev_kfree_skb_any(skb);
+		} else {
+			/* can free immediately (even in_irq()) if destructor does not exist */
+			dev_kfree_skb(skb);
+		}
+		skb = nskb;
+	}
+}
+
+uint32
+osl_pci_read_config(osl_t *osh, uint offset, uint size)
+{
+	uint val;
+	uint retry=PCI_CFG_RETRY;	 
+
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+	/* only 4byte access supported */
+	ASSERT(size == 4);
+
+	do {
+		pci_read_config_dword(osh->pdev, offset, &val);
+		if (val != 0xffffffff)
+			break;
+	} while (retry--);
+
+
+	return (val);
+}
+
+void
+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
+{
+	uint retry=PCI_CFG_RETRY;	 
+
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+	/* only 4byte access supported */
+	ASSERT(size == 4);
+
+	do {
+		pci_write_config_dword(osh->pdev, offset, val);
+		if (offset!=PCI_BAR0_WIN)
+			break;
+		if (osl_pci_read_config(osh,offset,size) == val) 
+			break;
+	} while (retry--);
+
+}
+
+/* return bus # for the pci device pointed by osh->pdev */
+uint
+osl_pci_bus(osl_t *osh)
+{
+	ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
+
+	return ((struct pci_dev *)osh->pdev)->bus->number;
+}
+
+/* return slot # for the pci device pointed by osh->pdev */
+uint
+osl_pci_slot(osl_t *osh)
+{
+	ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
+
+	return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
+}
+
+static void
+osl_pcmcia_attr(osl_t *osh, uint offset, char *buf, int size, bool write)
+{
+}
+
+void
+osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+	osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE);
+}
+
+void
+osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+	osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE);
+}
+
+
+#ifdef BCMDBG_MEM
+
+void*
+osl_debug_malloc(osl_t *osh, uint size, int line, char* file)
+{
+	bcm_mem_link_t *p;
+	char* basename;
+
+	ASSERT(size);
+	
+	if ((p = (bcm_mem_link_t*)osl_malloc(osh, sizeof(bcm_mem_link_t) + size)) == NULL)
+		return (NULL);
+	
+	p->size = size;
+	p->line = line;
+	
+	basename = strrchr(file, '/');
+	/* skip the '/' */
+	if (basename)
+		basename++;
+
+	if (!basename)
+		basename = file;
+	
+	strncpy(p->file, basename, BCM_MEM_FILENAME_LEN);
+	p->file[BCM_MEM_FILENAME_LEN - 1] = '\0';
+
+	/* link this block */
+	p->prev = NULL;
+	p->next = osh->dbgmem_list;
+	if (p->next)
+		p->next->prev = p;
+	osh->dbgmem_list = p;
+
+	return p + 1;
+}
+
+void
+osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file)
+{
+	bcm_mem_link_t *p = (bcm_mem_link_t *)((int8*)addr - sizeof(bcm_mem_link_t));
+	
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+	if (p->size == 0) {
+		printk("osl_debug_mfree: double free on addr 0x%x size %d at line %d file %s\n", 
+			(uint)addr, size, line, file);
+		ASSERT(p->size);
+		return;
+	}
+
+	if (p->size != size) {
+		printk("osl_debug_mfree: dealloc size %d does not match alloc size %d on addr 0x%x at line %d file %s\n",
+		       size, p->size, (uint)addr, line, file);
+		ASSERT(p->size == size);
+		return;
+	}
+
+	/* unlink this block */
+	if (p->prev)
+		p->prev->next = p->next;
+	if (p->next)
+		p->next->prev = p->prev;
+	if (osh->dbgmem_list == p)
+		osh->dbgmem_list = p->next;
+	p->next = p->prev = NULL;
+
+	osl_mfree(osh, p, size + sizeof(bcm_mem_link_t));
+}
+
+char*
+osl_debug_memdump(osl_t *osh, char *buf, uint sz)
+{
+	bcm_mem_link_t *p;
+	char *obuf;
+	
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+	obuf = buf;
+
+	buf += sprintf(buf, "   Address\tSize\tFile:line\n");
+	for (p = osh->dbgmem_list; p && ((buf - obuf) < (sz - 128)); p = p->next)
+		buf += sprintf(buf, "0x%08x\t%5d\t%s:%d\n",
+			(int)p + sizeof(bcm_mem_link_t), p->size, p->file, p->line);
+
+	return (obuf);
+}
+
+#endif	/* BCMDBG_MEM */
+
+void*
+osl_malloc(osl_t *osh, uint size)
+{
+	void *addr;
+	
+	/* only ASSERT if osh is defined */
+	if (osh)
+		ASSERT(osh->magic == OS_HANDLE_MAGIC);
+
+	if ((addr = kmalloc(size, GFP_ATOMIC)) == NULL) {
+		if(osh)
+			osh->failed++;
+		return (NULL);
+	}
+	if (osh)
+		osh->malloced += size;
+	
+	return (addr);
+}
+
+void
+osl_mfree(osl_t *osh, void *addr, uint size)
+{
+	if (osh) {
+		ASSERT(osh->magic == OS_HANDLE_MAGIC);
+		osh->malloced -= size;
+	}
+	kfree(addr);
+}
+
+uint
+osl_malloced(osl_t *osh)
+{
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+	return (osh->malloced);
+}
+
+uint osl_malloc_failed(osl_t *osh)
+{
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+	return (osh->failed);
+}
+
+void*
+osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
+{
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+	return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
+}
+
+void
+osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa)
+{
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+	pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
+}
+
+uint
+osl_dma_map(osl_t *osh, void *va, uint size, int direction)
+{
+	int dir;
+	
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+	return (pci_map_single(osh->pdev, va, size, dir));
+}
+
+void
+osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction)
+{
+	int dir;
+	
+	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+	pci_unmap_single(osh->pdev, (uint32)pa, size, dir);
+}
+
+#if defined(BINOSL)
+void
+osl_assert(char *exp, char *file, int line)
+{
+	char tempbuf[255];
+
+	sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
+	panic(tempbuf);
+}
+#endif	/* BCMDBG || BINOSL */
+
+void
+osl_delay(uint usec)
+{
+	uint d;
+
+	while (usec > 0) {
+		d = MIN(usec, 1000);
+		udelay(d);
+		usec -= d;
+	}
+}
+
+/*
+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
+ */
+#ifdef BINOSL
+
+int
+osl_printf(const char *format, ...)
+{
+	va_list args;
+	char buf[1024];
+	int len;
+
+	/* sprintf into a local buffer because there *is* no "vprintk()".. */
+	va_start(args, format);
+	len = vsprintf(buf, format, args);
+	va_end(args);
+
+	if (len > sizeof (buf)) {
+		printk("osl_printf: buffer overrun\n");
+		return (0);
+	}
+
+	return (printk(buf));
+}
+
+int
+osl_sprintf(char *buf, const char *format, ...)
+{
+	va_list args;
+	int rc;
+
+	va_start(args, format);
+	rc = vsprintf(buf, format, args);
+	va_end(args);
+	return (rc);
+}
+
+int
+osl_strcmp(const char *s1, const char *s2)
+{
+	return (strcmp(s1, s2));
+}
+
+int
+osl_strncmp(const char *s1, const char *s2, uint n)
+{
+	return (strncmp(s1, s2, n));
+}
+
+int
+osl_strlen(const char *s)
+{
+	return (strlen(s));
+}
+
+char*
+osl_strcpy(char *d, const char *s)
+{
+	return (strcpy(d, s));
+}
+
+char*
+osl_strncpy(char *d, const char *s, uint n)
+{
+	return (strncpy(d, s, n));
+}
+
+void
+bcopy(const void *src, void *dst, int len)
+{
+	memcpy(dst, src, len);
+}
+
+int
+bcmp(const void *b1, const void *b2, int len)
+{
+	return (memcmp(b1, b2, len));
+}
+
+void
+bzero(void *b, int len)
+{
+	memset(b, '\0', len);
+}
+
+uint32
+osl_readl(volatile uint32 *r)
+{
+	return (readl(r));
+}
+
+uint16
+osl_readw(volatile uint16 *r)
+{
+	return (readw(r));
+}
+
+uint8
+osl_readb(volatile uint8 *r)
+{
+	return (readb(r));
+}
+
+void
+osl_writel(uint32 v, volatile uint32 *r)
+{
+	writel(v, r);
+}
+
+void
+osl_writew(uint16 v, volatile uint16 *r)
+{
+	writew(v, r);
+}
+
+void
+osl_writeb(uint8 v, volatile uint8 *r)
+{
+	writeb(v, r);
+}
+
+void *
+osl_uncached(void *va)
+{
+#ifdef mips
+	return ((void*)KSEG1ADDR(va));
+#else
+	return ((void*)va);
+#endif
+}
+
+uint
+osl_getcycles(void)
+{
+	uint cycles;
+
+#if defined(mips)
+	cycles = read_c0_count() * 2;
+#elif defined(__i386__)
+	rdtscl(cycles);
+#else
+	cycles = 0;
+#endif
+	return cycles;
+}
+
+void *
+osl_reg_map(uint32 pa, uint size)
+{
+	return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
+}
+
+void
+osl_reg_unmap(void *va)
+{
+	iounmap(va);
+}
+
+int
+osl_busprobe(uint32 *val, uint32 addr)
+{
+#ifdef mips
+	return get_dbe(*val, (uint32*)addr);
+#else
+	*val = readl(addr);
+	return 0;
+#endif
+}
+
+uchar*
+osl_pktdata(osl_t *osh, void *skb)
+{
+	return (((struct sk_buff*)skb)->data);
+}
+
+uint
+osl_pktlen(osl_t *osh, void *skb)
+{
+	return (((struct sk_buff*)skb)->len);
+}
+
+uint
+osl_pktheadroom(osl_t *osh, void *skb)
+{
+	return (uint) skb_headroom((struct sk_buff *) skb);
+}
+
+uint
+osl_pkttailroom(osl_t *osh, void *skb)
+{
+	return (uint) skb_tailroom((struct sk_buff *) skb);
+}
+
+void*
+osl_pktnext(osl_t *osh, void *skb)
+{
+	return (((struct sk_buff*)skb)->next);
+}
+
+void
+osl_pktsetnext(void *skb, void *x)
+{
+	((struct sk_buff*)skb)->next = (struct sk_buff*)x;
+}
+
+void
+osl_pktsetlen(osl_t *osh, void *skb, uint len)
+{
+	__skb_trim((struct sk_buff*)skb, len);
+}
+
+uchar*
+osl_pktpush(osl_t *osh, void *skb, int bytes)
+{
+	return (skb_push((struct sk_buff*)skb, bytes));
+}
+
+uchar*
+osl_pktpull(osl_t *osh, void *skb, int bytes)
+{
+	return (skb_pull((struct sk_buff*)skb, bytes));
+}
+
+void*
+osl_pktdup(osl_t *osh, void *skb)
+{
+	return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
+}
+
+void*
+osl_pktcookie(void *skb)
+{
+	return ((void*)((struct sk_buff*)skb)->csum);
+}
+
+void
+osl_pktsetcookie(void *skb, void *x)
+{
+	((struct sk_buff*)skb)->csum = (uint)x;
+}
+
+void*
+osl_pktlink(void *skb)
+{
+	return (((struct sk_buff*)skb)->prev);
+}
+
+void
+osl_pktsetlink(void *skb, void *x)
+{
+	((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
+}
+
+uint
+osl_pktprio(void *skb)
+{
+	return (((struct sk_buff*)skb)->priority);
+}
+
+void
+osl_pktsetprio(void *skb, uint x)
+{
+	((struct sk_buff*)skb)->priority = x;
+}
+
+
+#endif	/* BINOSL */
diff -urN linux.old/drivers/net/hnd/sbutils.c linux.dev/drivers/net/hnd/sbutils.c
--- linux.old/drivers/net/hnd/sbutils.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/sbutils.c	2005-11-08 17:58:18.918914500 +0100
@@ -0,0 +1,2837 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sbpci.h>
+#include <sbpcie.h>
+#include <pcicfg.h>
+#include <sbpcmcia.h>
+#include <sbextif.h>
+#include <bcmsrom.h>
+
+/* debug/trace */
+#define	SB_ERROR(args)
+
+
+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
+typedef bool (*sb_intrsenabled_t)(void *intr_arg);
+
+/* misc sb info needed by some of the routines */
+typedef struct sb_info {
+
+	struct sb_pub  	sb;			/* back plane public state(must be first field of sb_info */
+
+	void	*osh;			/* osl os handle */
+	void	*sdh;			/* bcmsdh handle */
+
+	void	*curmap;		/* current regs va */
+	void	*regs[SB_MAXCORES];	/* other regs va */
+
+	uint	curidx;			/* current core index */
+	uint	dev_coreid;		/* the core provides driver functions */
+
+	bool	memseg;			/* flag to toggle MEM_SEG register */
+
+	uint	gpioidx;		/* gpio control core index */
+	uint	gpioid;			/* gpio control coretype */
+
+	uint	numcores;		/* # discovered cores */
+	uint	coreid[SB_MAXCORES];	/* id of each core */
+
+	void	*intr_arg;		/* interrupt callback function arg */
+	sb_intrsoff_t		intrsoff_fn;		/* function turns chip interrupts off */
+	sb_intrsrestore_t	intrsrestore_fn;	/* function restore chip interrupts */
+	sb_intrsenabled_t	intrsenabled_fn;	/* function to check if chip interrupts are enabled */
+
+} sb_info_t;
+
+/* local prototypes */
+static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
+	uint bustype, void *sdh, char **vars, int *varsz);
+static void BCMINIT(sb_scan)(sb_info_t *si);
+static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val);
+static uint _sb_coreidx(sb_info_t *si);
+static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit);
+static uint BCMINIT(sb_pcidev2chip)(uint pcidev);
+static uint BCMINIT(sb_chip2numcores)(uint chip);
+static bool sb_ispcie(sb_info_t *si);
+static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen);
+static int sb_pci_fixcfg(sb_info_t *si);
+
+/* routines to access mdio slave device registers */
+static int sb_pcie_mdiowrite(sb_info_t *si,  uint physmedia, uint readdr, uint val);
+static void BCMINIT(sb_war30841)(sb_info_t *si);
+
+/* delay needed between the mdio control/ mdiodata register data access */
+#define PR28829_DELAY() OSL_DELAY(10)
+
+
+/* global variable to indicate reservation/release of gpio's*/
+static uint32 sb_gpioreservation = 0;
+
+#define	SB_INFO(sbh)	(sb_info_t*)sbh
+#define	SET_SBREG(sbh, r, mask, val)	W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
+#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE))
+#define	GOODREGS(regs)	((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE))
+#define	REGS2SB(va)	(sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
+#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
+#define	BADIDX		(SB_MAXCORES+1)
+#define	NOREV		-1
+
+#define PCI(si)		((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) 
+#define PCIE(si)	((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE)) 
+
+/* sonicsrev */
+#define	SONICS_2_2	(SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
+#define	SONICS_2_3	(SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
+
+#define	R_SBREG(sbh, sbr)	sb_read_sbreg((sbh), (sbr))
+#define	W_SBREG(sbh, sbr, v)	sb_write_sbreg((sbh), (sbr), (v))
+#define	AND_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
+#define	OR_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
+
+/*
+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
+ * after core switching to avoid invalid register accesss inside ISR.
+ */
+#define INTR_OFF(si, intr_val) \
+	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
+		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
+#define INTR_RESTORE(si, intr_val) \
+	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
+		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
+
+/* dynamic clock control defines */
+#define	LPOMINFREQ	25000			/* low power oscillator min */
+#define	LPOMAXFREQ	43000			/* low power oscillator max */
+#define	XTALMINFREQ	19800000		/* 20 MHz - 1% */
+#define	XTALMAXFREQ	20200000		/* 20 MHz + 1% */
+#define	PCIMINFREQ	25000000		/* 25 MHz */
+#define	PCIMAXFREQ	34000000		/* 33 MHz + fudge */
+
+#define	ILP_DIV_5MHZ	0			/* ILP = 5 MHz */
+#define	ILP_DIV_1MHZ	4			/* ILP = 1 MHz */
+
+#define MIN_DUMPBUFLEN  32	/* debug */
+
+/* different register spaces to access thr'u pcie indirect access*/
+#define PCIE_CONFIGREGS 	1
+#define PCIE_PCIEREGS 		2
+
+/* GPIO Based LED powersave defines */
+#define DEFAULT_GPIO_ONTIME	10
+#define DEFAULT_GPIO_OFFTIME	90
+
+#define DEFAULT_GPIOTIMERVAL  ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
+
+static uint32
+sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr)
+{
+	uint8 tmp;
+	uint32 val, intr_val = 0;
+
+
+	/*
+	 * compact flash only has 11 bits address, while we needs 12 bits address.
+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+	 */
+	if(si->memseg) {
+		INTR_OFF(si, intr_val);
+		tmp = 1;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		sbr = (uint32) ((uintptr) sbr & ~(1 << 11));	/* mask out bit 11*/
+	}
+
+	val = R_REG(sbr);
+
+	if(si->memseg) {
+		tmp = 0;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		INTR_RESTORE(si, intr_val);
+	}
+
+	return (val);
+}
+
+static void
+sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v)
+{
+	uint8 tmp;
+	volatile uint32 dummy;
+	uint32 intr_val = 0;
+
+
+	/*
+	 * compact flash only has 11 bits address, while we needs 12 bits address.
+	 * MEM_SEG will be OR'd with other 11 bits address in hardware,
+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+	 */
+	if(si->memseg) {
+		INTR_OFF(si, intr_val);
+		tmp = 1;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		sbr = (uint32) ((uintptr) sbr & ~(1 << 11));	/* mask out bit 11*/
+	}
+
+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+#ifdef IL_BIGENDIAN
+		dummy = R_REG(sbr);
+		W_REG(((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
+#else
+		dummy = R_REG(sbr);
+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
+		dummy = R_REG(sbr);
+		W_REG(((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
+#endif
+	} else
+		W_REG(sbr, v);
+
+	if(si->memseg) {
+		tmp = 0;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
+		INTR_RESTORE(si, intr_val);
+	}
+}
+
+/*
+ * Allocate a sb handle.
+ * devid - pci device id (used to determine chip#)
+ * osh - opaque OS handle
+ * regs - virtual address of initial core registers
+ * bustype - pci/pcmcia/sb/sdio/etc
+ * vars - pointer to a pointer area for "environment" variables
+ * varsz - pointer to int to return the size of the vars
+ */
+sb_t * 
+BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs,
+	uint bustype, void *sdh, char **vars, int *varsz)
+{
+	sb_info_t *si;
+
+	/* alloc sb_info_t */
+	if ((si = MALLOC(osh, sizeof (sb_info_t))) == NULL) {
+		SB_ERROR(("sb_attach: malloc failed! malloced %d bytes\n", MALLOCED(osh)));
+		return (NULL);
+	}
+
+	if (BCMINIT(sb_doattach)(si, devid, osh, regs, bustype, sdh, vars, varsz) == NULL) {
+		MFREE(osh, si, sizeof (sb_info_t));
+		return (NULL);
+	}
+	return (sb_t *)si;
+}
+
+/* Using sb_kattach depends on SB_BUS support, either implicit  */
+/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */
+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
+
+/* global kernel resource */
+static sb_info_t ksi;
+
+/* generic kernel variant of sb_attach() */
+sb_t * 
+BCMINITFN(sb_kattach)()
+{
+	uint32 *regs;
+
+	if (ksi.curmap == NULL) {
+		uint32 cid;
+
+		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
+		cid = R_REG((uint32 *)regs);
+		if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
+		    ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
+		    ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
+			uint32 *scc, val;
+
+			scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
+			val = R_REG(scc);
+			SB_ERROR(("    initial scc = 0x%x\n", val));
+			val |= SCC_SS_XTAL;
+			W_REG(scc, val);
+		}
+
+		if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
+			SB_BUS, NULL, NULL, NULL) == NULL) {
+			return NULL;
+		}
+	}
+
+	return (sb_t *)&ksi;
+}
+#endif
+
+static sb_info_t  * 
+BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
+	uint bustype, void *sdh, char **vars, int *varsz)
+{
+	uint origidx;
+	chipcregs_t *cc;
+	sbconfig_t *sb;
+	uint32 w;
+
+	ASSERT(GOODREGS(regs));
+
+	bzero((uchar*)si, sizeof (sb_info_t));
+
+	si->sb.buscoreidx = si->gpioidx = BADIDX;
+
+	si->osh = osh;
+	si->curmap = regs;
+	si->sdh = sdh;
+
+	/* check to see if we are a sb core mimic'ing a pci core */
+	if (bustype == PCI_BUS) {
+		if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
+			bustype = SB_BUS;
+		else
+			bustype = PCI_BUS;
+	}
+
+	si->sb.bustype = bustype;
+	if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
+		SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n",
+			  si->sb.bustype, BUSTYPE(si->sb.bustype)));
+		return NULL;
+	}
+
+	/* need to set memseg flag for CF card first before any sb registers access */
+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
+		si->memseg = TRUE;
+
+	/* kludge to enable the clock on the 4306 which lacks a slowclock */
+	if (BUSTYPE(si->sb.bustype) == PCI_BUS)
+		sb_clkctl_xtal(&si->sb, XTAL|PLL, ON);
+
+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
+		w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32));
+		if (!GOODCOREADDR(w))
+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE);
+	}
+
+	/* initialize current core index value */
+	si->curidx = _sb_coreidx(si);
+
+	if (si->curidx == BADIDX) {
+		SB_ERROR(("sb_doattach: bad core index\n"));
+		return NULL;
+	}
+
+	/* get sonics backplane revision */
+	sb = REGS2SB(si->curmap);
+	si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
+
+	/* keep and reuse the initial register mapping */
+	origidx = si->curidx;
+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
+		si->regs[origidx] = regs;
+
+	/* is core-0 a chipcommon core? */
+	si->numcores = 1;
+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0);
+	if (sb_coreid(&si->sb) != SB_CC)
+		cc = NULL;
+
+	/* determine chip id and rev */
+	if (cc) {
+		/* chip common core found! */
+		si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK;
+		si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
+		si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
+	} else {
+		/* The only pcmcia chip without a chipcommon core is a 4301 */
+		if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
+			devid = BCM4301_DEVICE_ID;
+
+		/* no chip common core -- must convert device id to chip id */
+		if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) {
+			SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
+			sb_setcoreidx(&si->sb, origidx);
+			return NULL;
+		}
+	}
+
+	/* get chipcommon rev */
+	si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
+
+	/* determine numcores */
+	if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
+		si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
+	else
+		si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip);
+
+	/* return to original core */
+	sb_setcoreidx(&si->sb, origidx);
+
+	/* sanity checks */
+	ASSERT(si->sb.chip);
+
+	/* scan for cores */
+	BCMINIT(sb_scan)(si);
+
+	/* fixup necessary chip/core configurations */
+	if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
+		if (sb_pci_fixcfg(si)) {
+			SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
+			return NULL;
+		}
+	}
+	
+	/* srom_var_init() depends on sb_scan() info */
+	if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) {
+		SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
+		return (NULL);
+	}
+	
+	if (cc == NULL) {
+		/*
+		 * The chip revision number is hardwired into all
+		 * of the pci function config rev fields and is
+		 * independent from the individual core revision numbers.
+		 * For example, the "A0" silicon of each chip is chip rev 0.
+		 * For PCMCIA we get it from the CIS instead.
+		 */
+		if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+			ASSERT(vars);
+			si->sb.chiprev = getintvar(*vars, "chiprev");
+		} else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
+			w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
+			si->sb.chiprev = w & 0xff;
+		} else
+			si->sb.chiprev = 0;
+	}
+
+	if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+		w = getintvar(*vars, "regwindowsz");
+		si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
+	}
+
+	/* gpio control core is required */
+	if (!GOODIDX(si->gpioidx)) {
+		SB_ERROR(("sb_doattach: gpio control core not found\n"));
+		return NULL;
+	}
+
+	/* get boardtype and boardrev */
+	switch (BUSTYPE(si->sb.bustype)) {
+	case PCI_BUS:
+		/* do a pci config read to get subsystem id and subvendor id */
+		w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
+		si->sb.boardvendor = w & 0xffff;
+		si->sb.boardtype = (w >> 16) & 0xffff;
+		break;
+
+	case PCMCIA_BUS:
+	case SDIO_BUS:
+		si->sb.boardvendor = getintvar(*vars, "manfid");
+		si->sb.boardtype = getintvar(*vars, "prodid");
+		break;
+
+	case SB_BUS:
+	case JTAG_BUS:
+		si->sb.boardvendor = VENDOR_BROADCOM;
+		if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0)
+			si->sb.boardtype = 0xffff;
+		break;
+	}
+
+	if (si->sb.boardtype == 0) {
+		SB_ERROR(("sb_doattach: unknown board type\n"));
+		ASSERT(si->sb.boardtype);
+	}
+
+	/* setup the GPIO based LED powersave register */
+	if (si->sb.ccrev >= 16) {
+		w = getintvar(*vars, "gpiotimerval");
+		if (!w)
+			w = DEFAULT_GPIOTIMERVAL; 
+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
+	}
+
+
+	return (si);
+}
+
+uint
+sb_coreid(sb_t *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
+}
+
+uint
+sb_coreidx(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->curidx);
+}
+
+/* return current index of core */
+static uint
+_sb_coreidx(sb_info_t *si)
+{
+	sbconfig_t *sb;
+	uint32 sbaddr = 0;
+
+	ASSERT(si);
+
+	switch (BUSTYPE(si->sb.bustype)) {
+	case SB_BUS:
+		sb = REGS2SB(si->curmap);
+		sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
+		break;
+
+	case PCI_BUS:
+		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
+		break;
+
+	case PCMCIA_BUS: {
+		uint8 tmp = 0;
+
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
+		sbaddr  = (uint)tmp << 12;
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
+		sbaddr |= (uint)tmp << 16;
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
+		sbaddr |= (uint)tmp << 24;
+		break;
+	}
+
+#ifdef BCMJTAG
+	case JTAG_BUS:
+		sbaddr = (uint32)si->curmap;
+		break;
+#endif	/* BCMJTAG */
+
+	default:
+		ASSERT(0);
+	}
+
+	if (!GOODCOREADDR(sbaddr))
+		return BADIDX;
+
+	return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
+}
+
+uint
+sb_corevendor(sb_t *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
+}
+
+uint
+sb_corerev(sb_t *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint sbidh;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+	sbidh = R_SBREG(si, &(sb)->sbidhigh);
+
+	return (SBCOREREV(sbidh));
+}
+
+void *
+sb_osh(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return si->osh;
+}
+
+#define	SBTML_ALLOW	(SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
+
+/* set/clear sbtmstatelow core-specific flags */
+uint32
+sb_coreflags(sb_t *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint32 w;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	ASSERT((val & ~mask) == 0);
+	ASSERT((mask & ~SBTML_ALLOW) == 0);
+
+	/* mask and set */
+	if (mask || val) {
+		w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
+		W_SBREG(si, &sb->sbtmstatelow, w);
+	}
+
+	/* return the new value */
+	return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW);
+}
+
+/* set/clear sbtmstatehigh core-specific flags */
+uint32
+sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	uint32 w;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	ASSERT((val & ~mask) == 0);
+	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
+
+	/* mask and set */
+	if (mask || val) {
+		w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
+		W_SBREG(si, &sb->sbtmstatehigh, w);
+	}
+
+	/* return the new value */
+	return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
+}
+
+/* caller needs to take care of core-specific bist hazards */
+int
+sb_corebist(sb_t *sbh, uint coreid, uint coreunit)
+{
+	uint32 sblo;
+	uint coreidx;
+	sb_info_t *si;
+	int result = 0;
+
+	si = SB_INFO(sbh);
+
+	coreidx = sb_findcoreidx(si, coreid, coreunit);
+	if (!GOODIDX(coreidx))
+		result = BCME_ERROR;
+	else {
+		sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0);
+		sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE));
+		
+		SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000);
+	
+		if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF)
+			result = BCME_ERROR;
+
+		sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo);
+	}
+
+	return result;
+}
+
+bool
+sb_iscoreup(sb_t *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+	sb = REGS2SB(si->curmap);
+
+	return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
+}
+
+/*
+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
+ * switch back to the original core, and return the new value.
+ */
+static uint
+sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val)
+{
+	uint origidx;
+	uint32 *r;
+	uint w;
+	uint intr_val = 0;
+
+	ASSERT(GOODIDX(coreidx));
+	ASSERT(regoff < SB_CORE_SIZE);
+	ASSERT((val & ~mask) == 0);
+
+	INTR_OFF(si, intr_val);
+
+	/* save current core index */
+	origidx = sb_coreidx(&si->sb);
+
+	/* switch core */
+	r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff);
+
+	/* mask and set */
+	if (mask || val) {
+		if (regoff >= SBCONFIGOFF) {
+			w = (R_SBREG(si, r) & ~mask) | val;
+			W_SBREG(si, r, w);
+		} else {
+			w = (R_REG(r) & ~mask) | val;
+			W_REG(r, w);
+		}
+	}
+
+	/* readback */
+	if (regoff >= SBCONFIGOFF)
+		w = R_SBREG(si, r);
+	else
+		w = R_REG(r);
+
+	/* restore core index */
+	if (origidx != coreidx)
+		sb_setcoreidx(&si->sb, origidx);
+
+	INTR_RESTORE(si, intr_val);
+	return (w);
+}
+
+#define DWORD_ALIGN(x)  (x & ~(0x03))
+#define BYTE_POS(x) (x & 0x3)
+#define WORD_POS(x) (x & 0x1)
+
+#define BYTE_SHIFT(x)  (8 * BYTE_POS(x))
+#define WORD_SHIFT(x)  (16 * WORD_POS(x))
+
+#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
+#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
+
+#define read_pci_cfg_byte(a) \
+	(BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
+
+#define read_pci_cfg_write(a) \
+	(WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
+
+
+/* return TRUE if requested capability exists in the PCI config space */
+static bool 
+sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen)
+{
+	uint8 cap_id;
+	uint8 cap_ptr;
+	uint32 	bufsize;
+	uint8 byte_val;
+
+	if (BUSTYPE(si->sb.bustype) != PCI_BUS)
+		return FALSE;
+
+	/* check for Header type 0*/
+	byte_val = read_pci_cfg_byte(PCI_CFG_HDR);
+	if ((byte_val & 0x7f) != PCI_HEADER_NORMAL)
+		return FALSE;
+
+	/* check if the capability pointer field exists */
+	byte_val = read_pci_cfg_byte(PCI_CFG_STAT);
+	if (!(byte_val & PCI_CAPPTR_PRESENT))
+		return FALSE;
+
+	cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR);
+	/* check if the capability pointer is 0x00 */
+	if (cap_ptr == 0x00)
+		return FALSE;
+
+
+	/* loop thr'u the capability list and see if the pcie capabilty exists */
+
+	cap_id = read_pci_cfg_byte(cap_ptr);
+
+	while (cap_id != req_cap_id) {
+		cap_ptr = read_pci_cfg_byte((cap_ptr+1));
+		if (cap_ptr == 0x00) break;
+		cap_id = read_pci_cfg_byte(cap_ptr);
+	}
+	if (cap_id != req_cap_id) {
+		return FALSE;
+	}
+	/* found the caller requested capability */
+	if ((buf != NULL) &&  (buflen != NULL)) {
+		bufsize = *buflen;
+		if (!bufsize) goto end;
+		*buflen = 0;
+		/* copy the cpability data excluding cap ID and next ptr */
+		cap_ptr += 2;
+		if ((bufsize + cap_ptr)  > SZPCR)
+			bufsize = SZPCR - cap_ptr;
+		*buflen = bufsize;
+		while (bufsize--) {
+			*buf = read_pci_cfg_byte(cap_ptr);
+			cap_ptr++;
+			buf++;
+		}
+	}
+end:
+	return TRUE;
+}
+
+/* return TRUE if PCIE capability exists the pci config space */
+static bool
+sb_ispcie(sb_info_t *si)
+{
+	return(sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL));
+}
+
+/* scan the sb enumerated space to identify all cores */
+static void
+BCMINITFN(sb_scan)(sb_info_t *si)
+{
+	uint origidx;
+	uint i;
+	bool pci;
+	bool pcie;
+	uint pciidx;
+	uint pcieidx;
+	uint pcirev;
+	uint pcierev;
+
+
+
+	/* numcores should already be set */
+	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
+
+	/* save current core index */
+	origidx = sb_coreidx(&si->sb);
+
+	si->sb.buscorerev = NOREV;
+	si->sb.buscoreidx = BADIDX;
+
+	si->gpioidx = BADIDX;
+
+	pci = pcie = FALSE;
+	pcirev = pcierev = NOREV;
+	pciidx = pcieidx = BADIDX;
+
+	for (i = 0; i < si->numcores; i++) {
+		sb_setcoreidx(&si->sb, i);
+		si->coreid[i] = sb_coreid(&si->sb);
+
+		if (si->coreid[i] == SB_PCI) { 
+			pciidx = i;
+			pcirev = sb_corerev(&si->sb);
+			pci = TRUE;
+		} else if (si->coreid[i] == SB_PCIE) {
+			pcieidx = i;
+			pcierev = sb_corerev(&si->sb);
+			pcie = TRUE;
+		} else if (si->coreid[i] == SB_PCMCIA) {
+			si->sb.buscorerev = sb_corerev(&si->sb);
+			si->sb.buscoretype = si->coreid[i];
+			si->sb.buscoreidx = i; 
+		}
+	}
+	if (pci && pcie) {
+		if (sb_ispcie(si))
+			pci = FALSE;
+		else
+			pcie = FALSE;
+	}
+	if (pci) {
+		si->sb.buscoretype = SB_PCI;
+		si->sb.buscorerev = pcirev; 
+		si->sb.buscoreidx = pciidx; 
+	}
+	else if (pcie) {
+		si->sb.buscoretype = SB_PCIE;
+		si->sb.buscorerev = pcierev; 
+		si->sb.buscoreidx = pcieidx; 
+	}
+
+	/*
+	 * Find the gpio "controlling core" type and index.
+	 * Precedence:
+	 * - if there's a chip common core - use that
+	 * - else if there's a pci core (rev >= 2) - use that
+	 * - else there had better be an extif core (4710 only)
+	 */
+	if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) {
+		si->gpioidx = sb_findcoreidx(si, SB_CC, 0);
+		si->gpioid = SB_CC;
+	} else if (PCI(si) && (si->sb.buscorerev >= 2)) {
+		si->gpioidx = si->sb.buscoreidx;
+		si->gpioid = SB_PCI;
+	} else if (sb_findcoreidx(si, SB_EXTIF, 0)) {
+		si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0);
+		si->gpioid = SB_EXTIF;
+	} else
+		ASSERT(si->gpioidx != BADIDX);
+
+	/* return to original core index */
+	sb_setcoreidx(&si->sb, origidx);
+}
+
+/* may be called with core in reset */
+void
+sb_detach(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint idx;
+
+	si = SB_INFO(sbh);
+
+	if (si == NULL)
+		return;
+
+	if (BUSTYPE(si->sb.bustype) == SB_BUS)
+		for (idx = 0; idx < SB_MAXCORES; idx++)
+			if (si->regs[idx]) {
+				REG_UNMAP(si->regs[idx]);
+				si->regs[idx] = NULL;
+			}
+
+	if (si != &ksi)
+		MFREE(si->osh, si, sizeof (sb_info_t));
+}
+
+/* use pci dev id to determine chip id for chips not having a chipcommon core */
+static uint
+BCMINITFN(sb_pcidev2chip)(uint pcidev)
+{
+	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
+		return (BCM4710_DEVICE_ID);
+	if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
+		return (BCM4402_DEVICE_ID);
+	if (pcidev == BCM4401_ENET_ID)
+		return (BCM4402_DEVICE_ID);
+	if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
+		return (BCM4307_DEVICE_ID);
+	if (pcidev == BCM4301_DEVICE_ID)
+		return (BCM4301_DEVICE_ID);
+
+	return (0);
+}
+
+/* convert chip number to number of i/o cores */
+static uint
+BCMINITFN(sb_chip2numcores)(uint chip)
+{
+	if (chip == BCM4710_DEVICE_ID)
+		return (9);
+	if (chip == BCM4402_DEVICE_ID)
+		return (3);
+	if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID))
+		return (5);
+	if (chip == BCM4306_DEVICE_ID)	/* < 4306c0 */
+		return (6);
+	if (chip == BCM4704_DEVICE_ID)
+		return (9);
+	if (chip == BCM5365_DEVICE_ID)
+		return (7);
+
+	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
+	ASSERT(0);
+	return (1);
+}
+
+/* return index of coreid or BADIDX if not found */
+static uint
+sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit)
+{
+	uint found;
+	uint i;
+
+	found = 0;
+
+	for (i = 0; i < si->numcores; i++)
+		if (si->coreid[i] == coreid) {
+			if (found == coreunit)
+				return (i);
+			found++;
+		}
+
+	return (BADIDX);
+}
+
+/* 
+ * this function changes logical "focus" to the indiciated core, 
+ * must be called with interrupt off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
+sb_setcoreidx(sb_t *sbh, uint coreidx)
+{
+	sb_info_t *si;
+	uint32 sbaddr;
+	uint8 tmp;
+
+	si = SB_INFO(sbh);
+
+	if (coreidx >= si->numcores)
+		return (NULL);
+	
+	/*
+	 * If the user has provided an interrupt mask enabled function,
+	 * then assert interrupts are disabled before switching the core.
+	 */
+	ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
+
+	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
+
+	switch (BUSTYPE(si->sb.bustype)) {
+	case SB_BUS:
+		/* map new one */
+		if (!si->regs[coreidx]) {
+			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
+			ASSERT(GOODREGS(si->regs[coreidx]));
+		}
+		si->curmap = si->regs[coreidx];
+		break;
+
+	case PCI_BUS:
+		/* point bar0 window */
+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
+		break;
+
+	case PCMCIA_BUS:
+		tmp = (sbaddr >> 12) & 0x0f;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
+		tmp = (sbaddr >> 16) & 0xff;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
+		tmp = (sbaddr >> 24) & 0xff;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
+		break;
+#ifdef BCMJTAG
+	case JTAG_BUS:
+		/* map new one */
+		if (!si->regs[coreidx]) {
+			si->regs[coreidx] = (void *)sbaddr;
+			ASSERT(GOODREGS(si->regs[coreidx]));
+		}
+		si->curmap = si->regs[coreidx];
+		break;
+#endif	/* BCMJTAG */
+	}
+
+	si->curidx = coreidx;
+
+	return (si->curmap);
+}
+
+/* 
+ * this function changes logical "focus" to the indiciated core, 
+ * must be called with interrupt off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
+sb_setcore(sb_t *sbh, uint coreid, uint coreunit)
+{
+	sb_info_t *si;
+	uint idx;
+
+	si = SB_INFO(sbh);
+	idx = sb_findcoreidx(si, coreid, coreunit);
+	if (!GOODIDX(idx))
+		return (NULL);
+
+	return (sb_setcoreidx(sbh, idx));
+}
+
+/* return chip number */
+uint
+BCMINITFN(sb_chip)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.chip);
+}
+
+/* return chip revision number */
+uint
+BCMINITFN(sb_chiprev)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.chiprev);
+}
+
+/* return chip common revision number */
+uint
+BCMINITFN(sb_chipcrev)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.ccrev);
+}
+
+/* return chip package option */
+uint
+BCMINITFN(sb_chippkg)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.chippkg);
+}
+
+/* return PCI core rev. */
+uint
+BCMINITFN(sb_pcirev)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.buscorerev);
+}
+
+bool
+BCMINITFN(sb_war16165)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	return (PCI(si) && (si->sb.buscorerev <= 10));
+}
+
+static void 
+BCMINITFN(sb_war30841)(sb_info_t *si)
+{
+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
+	sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
+}
+
+/* return PCMCIA core rev. */
+uint
+BCMINITFN(sb_pcmciarev)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.buscorerev);
+}
+
+/* return board vendor id */
+uint
+BCMINITFN(sb_boardvendor)(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.boardvendor);
+}
+
+/* return boardtype */
+uint
+BCMINITFN(sb_boardtype)(sb_t *sbh)
+{
+	sb_info_t *si;
+	char *var;
+
+	si = SB_INFO(sbh);
+
+	if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
+		/* boardtype format is a hex string */
+		si->sb.boardtype = getintvar(NULL, "boardtype");
+
+		/* backward compatibility for older boardtype string format */
+		if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
+			if (!strcmp(var, "bcm94710dev"))
+				si->sb.boardtype = BCM94710D_BOARD;
+			else if (!strcmp(var, "bcm94710ap"))
+				si->sb.boardtype = BCM94710AP_BOARD;
+			else if (!strcmp(var, "bu4710"))
+				si->sb.boardtype = BU4710_BOARD;
+			else if (!strcmp(var, "bcm94702mn"))
+				si->sb.boardtype = BCM94702MN_BOARD;
+			else if (!strcmp(var, "bcm94710r1"))
+				si->sb.boardtype = BCM94710R1_BOARD;
+			else if (!strcmp(var, "bcm94710r4"))
+				si->sb.boardtype = BCM94710R4_BOARD;
+			else if (!strcmp(var, "bcm94702cpci"))
+				si->sb.boardtype = BCM94702CPCI_BOARD;
+			else if (!strcmp(var, "bcm95380_rr"))
+				si->sb.boardtype = BCM95380RR_BOARD;
+		}
+	}
+
+	return (si->sb.boardtype);
+}
+
+/* return bus type of sbh device */
+uint
+sb_bus(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	return (si->sb.bustype);
+}
+
+/* return bus core type */
+uint
+sb_buscoretype(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	return (si->sb.buscoretype);
+}
+
+/* return bus core revision */
+uint
+sb_buscorerev(sb_t *sbh)
+{
+	sb_info_t *si;
+	si = SB_INFO(sbh);
+
+	return (si->sb.buscorerev);
+}
+
+/* return list of found cores */
+uint
+sb_corelist(sb_t *sbh, uint coreid[])
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
+	return (si->numcores);
+}
+
+/* return current register mapping */
+void *
+sb_coreregs(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	ASSERT(GOODREGS(si->curmap));
+
+	return (si->curmap);
+}
+
+
+/* do buffered registers update */
+void
+sb_commit(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint origidx;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	origidx = si->curidx;
+	ASSERT(GOODIDX(origidx));
+
+	INTR_OFF(si, intr_val);
+
+	/* switch over to chipcommon core if there is one, else use pci */
+	if (si->sb.ccrev != NOREV) {
+		chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
+
+		/* do the buffer registers update */
+		W_REG(&ccregs->broadcastaddress, SB_COMMIT);
+		W_REG(&ccregs->broadcastdata, 0x0);
+	} else if (PCI(si)) {
+		sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
+
+		/* do the buffer registers update */
+		W_REG(&pciregs->bcastaddr, SB_COMMIT);
+		W_REG(&pciregs->bcastdata, 0x0);
+	} else
+		ASSERT(0);
+
+	/* restore core index */
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+}
+
+/* reset and re-enable a core */
+void
+sb_core_reset(sb_t *sbh, uint32 bits)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	volatile uint32 dummy;
+
+	si = SB_INFO(sbh);
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	/*
+	 * Must do the disable sequence first to work for arbitrary current core state.
+	 */
+	sb_core_disable(sbh, bits);
+
+	/*
+	 * Now do the initialization sequence.
+	 */
+
+	/* set reset while enabling the clock and forcing them on throughout the core */
+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
+	dummy = R_SBREG(si, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+
+	if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
+		W_SBREG(si, &sb->sbtmstatehigh, 0);
+	}
+	if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
+		AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+	}
+
+	/* clear reset and allow it to propagate throughout the core */
+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
+	dummy = R_SBREG(si, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+
+	/* leave clock enabled */
+	W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
+	dummy = R_SBREG(si, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+}
+
+void
+sb_core_tofixup(sb_t *sbh)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+
+	if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) || (PCI(si) && (si->sb.buscorerev >= 5)) )
+		return;
+
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	if (BUSTYPE(si->sb.bustype) == SB_BUS) {
+		SET_SBREG(si, &sb->sbimconfiglow,
+			  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+			  (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
+	} else {
+		if (sb_coreid(sbh) == SB_PCI) {
+			SET_SBREG(si, &sb->sbimconfiglow,
+				  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+				  (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+		} else {
+			SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
+		}
+	}
+
+	sb_commit(sbh);
+}
+
+/*
+ * Set the initiator timeout for the "master core".
+ * The master core is defined to be the core in control
+ * of the chip and so it issues accesses to non-memory
+ * locations (Because of dma *any* core can access memeory).
+ *
+ * The routine uses the bus to decide who is the master:
+ *	SB_BUS => mips
+ *	JTAG_BUS => chipc
+ *	PCI_BUS => pci or pcie
+ *	PCMCIA_BUS => pcmcia
+ *	SDIO_BUS => pcmcia
+ *
+ * This routine exists so callers can disable initiator
+ * timeouts so accesses to very slow devices like otp
+ * won't cause an abort. The routine allows arbitrary
+ * settings of the service and request timeouts, though.
+ *
+ * Returns the timeout state before changing it or -1
+ * on error.
+ */
+
+#define	TO_MASK	(SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
+
+uint32
+sb_set_initiator_to(sb_t *sbh, uint32 to)
+{
+	sb_info_t *si;
+	uint origidx, idx;
+	uint intr_val = 0;
+	uint32 tmp, ret = 0xffffffff;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+
+	if ((to & ~TO_MASK) != 0)
+		return ret;
+
+	/* Figure out the master core */
+	idx = BADIDX;
+	switch (BUSTYPE(si->sb.bustype)) {
+	case PCI_BUS:
+		idx = si->sb.buscoreidx; 
+		break;
+	case JTAG_BUS:
+		idx = SB_CC_IDX;
+		break;
+	case PCMCIA_BUS:
+	case SDIO_BUS:
+		idx = sb_findcoreidx(si, SB_PCMCIA, 0);
+		break;
+	case SB_BUS:
+		if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX)
+			idx = sb_findcoreidx(si, SB_MIPS, 0);
+		break;
+	default:
+		ASSERT(0);
+	}
+	if (idx == BADIDX)
+		return ret;
+
+	INTR_OFF(si, intr_val);
+	origidx = sb_coreidx(sbh);
+
+	sb = REGS2SB(sb_setcoreidx(sbh, idx));
+
+	tmp = R_SBREG(si, &sb->sbimconfiglow);
+	ret = tmp & TO_MASK;
+	W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
+
+	sb_commit(sbh);
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return ret;
+}
+
+void
+sb_core_disable(sb_t *sbh, uint32 bits)
+{
+	sb_info_t *si;
+	volatile uint32 dummy;
+	uint32 rej;
+	sbconfig_t *sb;
+
+	si = SB_INFO(sbh);
+
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+
+	/* if core is already in reset, just return */
+	if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
+		return;
+
+	/* reject value changed between sonics 2.2 and 2.3 */
+	if (si->sb.sonicsrev == SONICS_2_2)
+		rej = (1 << SBTML_REJ_SHIFT);
+	else
+		rej = (2 << SBTML_REJ_SHIFT);
+
+	/* if clocks are not enabled, put into reset and return */
+	if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
+		goto disable;
+
+	/* set target reject and spin until busy is clear (preserve core-specific bits) */
+	OR_SBREG(si, &sb->sbtmstatelow, rej);
+	dummy = R_SBREG(si, &sb->sbtmstatelow);
+	OSL_DELAY(1);
+	SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
+
+ 	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
+		OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
+		dummy = R_SBREG(si, &sb->sbimstate);
+		OSL_DELAY(1);
+		SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
+	}
+
+	/* set reset and reject while enabling the clocks */
+	W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
+	dummy = R_SBREG(si, &sb->sbtmstatelow);
+	OSL_DELAY(10);
+
+	/* don't forget to clear the initiator reject bit */
+	if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
+		AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
+
+disable:
+	/* leave reset and reject asserted */
+	W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
+	OSL_DELAY(1);
+}
+
+/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void
+sb_watchdog(sb_t *sbh, uint ticks)
+{
+	sb_info_t *si = SB_INFO(sbh);
+
+	/* instant NMI */
+	switch (si->gpioid) {
+	case SB_CC:
+		sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
+		break;
+	case SB_EXTIF:
+		sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
+		break;
+	}
+}
+
+/* initialize the pcmcia core */
+void
+sb_pcmcia_init(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint8 cor;
+
+	si = SB_INFO(sbh);
+
+	/* enable d11 mac interrupts */
+	if (si->sb.chip == BCM4301_DEVICE_ID) {
+		/* Have to use FCR2 in 4301 */
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
+		cor |= COR_IRQEN | COR_FUNEN;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
+	} else {
+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
+		cor |= COR_IRQEN | COR_FUNEN;
+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
+	}
+
+}
+
+
+/*
+ * Configure the pci core for pci client (NIC) action
+ * coremask is the bitvec of cores by index to be enabled.
+ */
+void
+sb_pci_setup(sb_t *sbh, uint coremask)
+{
+	sb_info_t *si;
+	sbconfig_t *sb;
+	sbpciregs_t *pciregs;
+	uint32 sbflag;
+	uint32 w;
+	uint idx;
+	int reg_val;
+
+	si = SB_INFO(sbh);
+
+	/* if not pci bus, we're done */
+	if (BUSTYPE(si->sb.bustype) != PCI_BUS)
+		return;
+
+	ASSERT(PCI(si) || PCIE(si));
+	ASSERT(si->sb.buscoreidx != BADIDX);
+
+	/* get current core index */
+	idx = si->curidx;
+
+	/* we interrupt on this backplane flag number */
+	ASSERT(GOODREGS(si->curmap));
+	sb = REGS2SB(si->curmap);
+	sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+
+	/* switch over to pci core */
+	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx);
+	sb = REGS2SB(pciregs);
+
+	/*
+	 * Enable sb->pci interrupts.  Assume
+	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
+	 */
+	if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) {
+		/* pci config write to set this core bit in PCIIntMask */
+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
+		w |= (coremask << PCI_SBIM_SHIFT);
+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
+	} else {
+		/* set sbintvec bit for our flag number */
+		OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
+	}
+
+	if (PCI(si)) {
+		OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
+		if (si->sb.buscorerev >= 11)
+			OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
+		if (si->sb.buscorerev < 5) {
+			SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+				(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+			sb_commit(sbh);
+		}
+	}
+
+	if (PCIE(si) && (si->sb.buscorerev == 0)) {
+		reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG);
+		reg_val |= 0x8; 
+		sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG, reg_val);
+
+		reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG);
+		reg_val &= ~(0x40);
+		sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val);
+
+		BCMINIT(sb_war30841)(si);
+	}
+
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+}
+
+uint32
+sb_base(uint32 admatch)
+{
+	uint32 base;
+	uint type;
+
+	type = admatch & SBAM_TYPE_MASK;
+	ASSERT(type < 3);
+
+	base = 0;
+
+	if (type == 0) {
+		base = admatch & SBAM_BASE0_MASK;
+	} else if (type == 1) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		base = admatch & SBAM_BASE1_MASK;
+	} else if (type == 2) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		base = admatch & SBAM_BASE2_MASK;
+	}
+
+	return (base);
+}
+
+uint32
+sb_size(uint32 admatch)
+{
+	uint32 size;
+	uint type;
+
+	type = admatch & SBAM_TYPE_MASK;
+	ASSERT(type < 3);
+
+	size = 0;
+
+	if (type == 0) {
+		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
+	} else if (type == 1) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
+	} else if (type == 2) {
+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
+		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
+	}
+
+	return (size);
+}
+
+/* return the core-type instantiation # of the current core */
+uint
+sb_coreunit(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint idx;
+	uint coreid;
+	uint coreunit;
+	uint i;
+
+	si = SB_INFO(sbh);
+	coreunit = 0;
+
+	idx = si->curidx;
+
+	ASSERT(GOODREGS(si->curmap));
+	coreid = sb_coreid(sbh);
+
+	/* count the cores of our type */
+	for (i = 0; i < idx; i++)
+		if (si->coreid[i] == coreid)
+			coreunit++;
+
+	return (coreunit);
+}
+
+static INLINE uint32
+factor6(uint32 x)
+{
+	switch (x) {
+	case CC_F6_2:	return 2;
+	case CC_F6_3:	return 3;
+	case CC_F6_4:	return 4;
+	case CC_F6_5:	return 5;
+	case CC_F6_6:	return 6;
+	case CC_F6_7:	return 7;
+	default:	return 0;
+	}
+}
+
+/* calculate the speed the SB would run at given a set of clockcontrol values */
+uint32
+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
+{
+	uint32 n1, n2, clock, m1, m2, m3, mc;
+
+	n1 = n & CN_N1_MASK;
+	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
+
+	if (pll_type == PLL_TYPE6) {
+		if (m & CC_T6_MMASK)
+			return CC_T6_M1;
+		else
+			return CC_T6_M0;
+	} else if ((pll_type == PLL_TYPE1) ||
+		   (pll_type == PLL_TYPE3) ||
+		   (pll_type == PLL_TYPE4) ||
+		   (pll_type == PLL_TYPE7)) {
+		n1 = factor6(n1);
+		n2 += CC_F5_BIAS;
+	} else if (pll_type == PLL_TYPE2) {
+		n1 += CC_T2_BIAS;
+		n2 += CC_T2_BIAS;
+		ASSERT((n1 >= 2) && (n1 <= 7));
+		ASSERT((n2 >= 5) && (n2 <= 23));
+	} else if (pll_type == PLL_TYPE5) {
+		return (100000000);
+	} else
+		ASSERT(0);
+	/* PLL types 3 and 7 use BASE2 (25Mhz) */
+	if ((pll_type == PLL_TYPE3) ||
+	    (pll_type == PLL_TYPE7)) { 
+		clock =  CC_CLOCK_BASE2 * n1 * n2;
+	}
+	else 
+		clock = CC_CLOCK_BASE1 * n1 * n2;
+
+	if (clock == 0)
+		return 0;
+
+	m1 = m & CC_M1_MASK;
+	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
+	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
+	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
+
+	if ((pll_type == PLL_TYPE1) ||
+	    (pll_type == PLL_TYPE3) ||
+	    (pll_type == PLL_TYPE4) ||
+	    (pll_type == PLL_TYPE7)) {
+		m1 = factor6(m1);
+		if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
+			m2 += CC_F5_BIAS;
+		else
+			m2 = factor6(m2);
+		m3 = factor6(m3);
+
+		switch (mc) {
+		case CC_MC_BYPASS:	return (clock);
+		case CC_MC_M1:		return (clock / m1);
+		case CC_MC_M1M2:	return (clock / (m1 * m2));
+		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
+		case CC_MC_M1M3:	return (clock / (m1 * m3));
+		default:		return (0);
+		}
+	} else {
+		ASSERT(pll_type == PLL_TYPE2);
+
+		m1 += CC_T2_BIAS;
+		m2 += CC_T2M2_BIAS;
+		m3 += CC_T2_BIAS;
+		ASSERT((m1 >= 2) && (m1 <= 7));
+		ASSERT((m2 >= 3) && (m2 <= 10));
+		ASSERT((m3 >= 2) && (m3 <= 7));
+
+		if ((mc & CC_T2MC_M1BYP) == 0)
+			clock /= m1;
+		if ((mc & CC_T2MC_M2BYP) == 0)
+			clock /= m2;
+		if ((mc & CC_T2MC_M3BYP) == 0)
+			clock /= m3;
+
+		return(clock);
+	}
+}
+
+/* returns the current speed the SB is running at */
+uint32
+sb_clock(sb_t *sbh)
+{
+	sb_info_t *si;
+	extifregs_t *eir;
+	chipcregs_t *cc;
+	uint32 n, m;
+	uint idx;
+	uint32 pll_type, rate;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+	idx = si->curidx;
+	pll_type = PLL_TYPE1;
+
+	INTR_OFF(si, intr_val);
+
+	/* switch to extif or chipc core */
+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
+		n = R_REG(&eir->clockcontrol_n);
+		m = R_REG(&eir->clockcontrol_sb);
+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
+		n = R_REG(&cc->clockcontrol_n);
+		if (pll_type == PLL_TYPE6)
+			m = R_REG(&cc->clockcontrol_mips);
+		else if (pll_type == PLL_TYPE3)
+		{
+			// Added by Chen-I for 5365 
+			if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) 	
+				m = R_REG(&cc->clockcontrol_sb);
+			else
+				m = R_REG(&cc->clockcontrol_m2);
+		}
+		else
+			m = R_REG(&cc->clockcontrol_sb);
+	} else {
+		INTR_RESTORE(si, intr_val);
+		return 0;
+	}
+
+	// Added by Chen-I for 5365 
+	if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+	{
+		rate = 100000000;
+	}
+	else
+	{	
+		/* calculate rate */
+		rate = sb_clock_rate(pll_type, n, m);
+		if (pll_type == PLL_TYPE3)
+			rate = rate / 2;
+	}
+
+	/* switch back to previous core */
+	sb_setcoreidx(sbh, idx);
+
+	INTR_RESTORE(si, intr_val);
+
+	return rate;
+}
+
+/* change logical "focus" to the gpio core for optimized access */
+void*
+sb_gpiosetcore(sb_t *sbh)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	return (sb_setcoreidx(sbh, si->gpioidx));
+}
+
+/* mask&set gpiocontrol bits */
+uint32
+sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* gpios could be shared on router platforms */
+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
+		mask = priority ? (sb_gpioreservation & mask) :
+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
+		val &= mask;
+	}
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
+		break;
+
+	case SB_EXTIF:
+		return (0);
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output enable bits */
+uint32
+sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* gpios could be shared on router platforms */
+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
+		mask = priority ? (sb_gpioreservation & mask) :
+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
+		val &= mask;
+	}
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioouten);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioouten);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
+		break;
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output bits */
+uint32
+sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* gpios could be shared on router platforms */
+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
+		mask = priority ? (sb_gpioreservation & mask) :
+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
+		val &= mask;
+	}
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioout);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioout);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpio[0].out);
+		break;
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* reserve one gpio */
+uint32
+sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
+	if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
+		return -1;
+	}
+	/* make sure only one bit is set */
+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
+		return -1;
+	}
+
+	/* already reserved */
+	if (sb_gpioreservation & gpio_bitmask)
+		return -1;
+	/* set reservation */
+	sb_gpioreservation |= gpio_bitmask;
+
+	return sb_gpioreservation;
+}
+
+/* release one gpio */
+/* 
+ * releasing the gpio doesn't change the current value on the GPIO last write value 
+ * persists till some one overwrites it
+*/
+
+uint32
+sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
+	if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority))  {
+		ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
+		return -1;
+	}
+	/* make sure only one bit is set */
+	if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
+		ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
+		return -1;
+	}
+	
+	/* already released */
+	if (!(sb_gpioreservation & gpio_bitmask))
+		return -1;
+
+	/* clear reservation */
+	sb_gpioreservation &= ~gpio_bitmask;
+
+	return sb_gpioreservation;
+}
+
+/* return the current gpioin register value */
+uint32
+sb_gpioin(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpioin);
+		break;
+
+	case SB_PCI:
+		regoff = OFFSETOF(sbpciregs_t, gpioin);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpioin);
+		break;
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, 0, 0));
+}
+
+/* mask&set gpio interrupt polarity bits */
+uint32
+sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* gpios could be shared on router platforms */
+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
+		mask = priority ? (sb_gpioreservation & mask) :
+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
+		val &= mask;
+	}
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
+		break;
+
+	case SB_PCI:
+		/* pci gpio implementation does not support interrupt polarity */
+		ASSERT(0);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
+		break;
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio interrupt mask bits */
+uint32
+sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+	sb_info_t *si;
+	uint regoff;
+
+	si = SB_INFO(sbh);
+	regoff = 0;
+
+	priority = GPIO_DRV_PRIORITY; /* compatibility hack */
+
+	/* gpios could be shared on router platforms */
+	if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
+		mask = priority ? (sb_gpioreservation & mask) :
+			((sb_gpioreservation | mask) & ~(sb_gpioreservation));
+		val &= mask;
+	}
+
+	switch (si->gpioid) {
+	case SB_CC:
+		regoff = OFFSETOF(chipcregs_t, gpiointmask);
+		break;
+
+	case SB_PCI:
+		/* pci gpio implementation does not support interrupt mask */
+		ASSERT(0);
+		break;
+
+	case SB_EXTIF:
+		regoff = OFFSETOF(extifregs_t, gpiointmask);
+		break;
+	}
+
+	return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* assign the gpio to an led */
+uint32
+sb_gpioled(sb_t *sbh, uint32 mask, uint32 val)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	if (si->sb.ccrev < 16)
+		return -1;
+
+	/* gpio led powersave reg */
+	return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
+}
+
+/* mask&set gpio timer val */
+uint32 
+sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval)
+{
+	sb_info_t *si;
+	si = SB_INFO(sbh);
+
+	if (si->sb.ccrev < 16)
+		return -1;
+
+	return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
+}
+
+
+/* return the slow clock source - LPO, XTAL, or PCI */
+static uint
+sb_slowclk_src(sb_info_t *si)
+{
+	chipcregs_t *cc;
+
+
+	ASSERT(sb_coreid(&si->sb) == SB_CC);
+
+	if (si->sb.ccrev < 6) {
+		if ((BUSTYPE(si->sb.bustype) == PCI_BUS)
+			&& (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS))
+			return (SCC_SS_PCI);
+		else
+			return (SCC_SS_XTAL);
+	} else if (si->sb.ccrev < 10) {
+		cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
+		return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK);
+	} else	/* Insta-clock */
+		return (SCC_SS_XTAL);
+}
+
+/* return the ILP (slowclock) min or max frequency */
+static uint
+sb_slowclk_freq(sb_info_t *si, bool max)
+{
+	chipcregs_t *cc;
+	uint32 slowclk;
+	uint div;
+
+
+	ASSERT(sb_coreid(&si->sb) == SB_CC);
+
+	cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
+
+	/* shouldn't be here unless we've established the chip has dynamic clk control */
+	ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
+
+	slowclk = sb_slowclk_src(si);
+	if (si->sb.ccrev < 6) {
+		if (slowclk == SCC_SS_PCI)
+			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
+		else
+			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
+	} else if (si->sb.ccrev < 10) {
+		div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
+		if (slowclk == SCC_SS_LPO)
+			return (max? LPOMAXFREQ : LPOMINFREQ);
+		else if (slowclk == SCC_SS_XTAL)
+			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
+		else if (slowclk == SCC_SS_PCI)
+			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
+		else
+			ASSERT(0);
+	} else {
+		/* Chipc rev 10 is InstaClock */
+		div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT;
+		div = 4 * (div + 1);
+		return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
+	}
+	return (0);
+}
+
+static void
+sb_clkctl_setdelay(sb_info_t *si, void *chipcregs)
+{
+	chipcregs_t * cc;
+	uint slowmaxfreq, pll_delay, slowclk;
+	uint pll_on_delay, fref_sel_delay;
+
+	pll_delay = PLL_DELAY;
+
+	/* If the slow clock is not sourced by the xtal then add the xtal_on_delay
+	 * since the xtal will also be powered down by dynamic clk control logic.
+	 */
+	slowclk = sb_slowclk_src(si);
+	if (slowclk != SCC_SS_XTAL)
+		pll_delay += XTAL_ON_DELAY;
+
+	/* Starting with 4318 it is ILP that is used for the delays */
+	slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
+
+	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
+	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
+
+	cc = (chipcregs_t *)chipcregs;
+	W_REG(&cc->pll_on_delay, pll_on_delay);
+	W_REG(&cc->fref_sel_delay, fref_sel_delay);
+}
+
+int
+sb_pwrctl_slowclk(void *sbh, bool set, uint *div)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint intr_val = 0;
+	uint err = 0;
+	
+	si = SB_INFO(sbh);
+
+	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
+	if (si->sb.ccrev < 6)
+		return 1;
+
+	/* chipcommon cores rev10 are a whole new ball game */
+	if (si->sb.ccrev >= 10)
+		return 1;
+
+	if (set && ((*div % 4) || (*div < 4)))
+		return 2;
+	
+	INTR_OFF(si, intr_val);
+	origidx = si->curidx;
+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
+	ASSERT(cc != NULL);
+	
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) {
+		err = 3;
+		goto done;
+	}
+
+	if (set) {
+		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT));
+		sb_clkctl_setdelay(sbh, (void *)cc);
+	} else
+		*div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return err;
+}
+
+/* initialize power control delay registers */
+void sb_clkctl_init(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+
+	si = SB_INFO(sbh);
+
+	origidx = si->curidx;
+
+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
+		return;
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	/* 4317pc does not work with SlowClock less than 5 MHz */
+	if ((BUSTYPE(si->sb.bustype) == PCMCIA_BUS) && (si->sb.ccrev >= 6) && (si->sb.ccrev < 10))
+		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (ILP_DIV_5MHZ << SCC_CD_SHIFT));
+
+	/* set all Instaclk chip ILP to 1 MHz */
+	else if (si->sb.ccrev >= 10)
+		SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
+	
+	sb_clkctl_setdelay(si, (void *)cc);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+}
+void sb_pwrctl_init(sb_t *sbh)
+{
+sb_clkctl_init(sbh);
+}
+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
+uint16
+sb_clkctl_fast_pwrup_delay(sb_t *sbh)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint slowminfreq;
+	uint16 fpdelay;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+	fpdelay = 0;
+	origidx = si->curidx;
+
+	INTR_OFF(si, intr_val);
+
+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
+		goto done;
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	slowminfreq = sb_slowclk_freq(si, FALSE);
+	fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return (fpdelay);
+}
+uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh)
+{
+return sb_clkctl_fast_pwrup_delay(sbh);
+}
+/* turn primary xtal and/or pll off/on */
+int
+sb_clkctl_xtal(sb_t *sbh, uint what, bool on)
+{
+	sb_info_t *si;
+	uint32 in, out, outen;
+
+	si = SB_INFO(sbh);
+
+	switch (BUSTYPE(si->sb.bustype)) {
+
+
+		case PCMCIA_BUS:
+			return (0);
+
+
+		case PCI_BUS:
+
+			/* pcie core doesn't have any mapping to control the xtal pu */
+			if (PCIE(si))
+				return -1;
+
+			in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
+			out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
+			outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
+
+			/*
+			 * Avoid glitching the clock if GPRS is already using it.
+			 * We can't actually read the state of the PLLPD so we infer it
+			 * by the value of XTAL_PU which *is* readable via gpioin.
+			 */
+			if (on && (in & PCI_CFG_GPIO_XTAL))
+				return (0);
+
+			if (what & XTAL)
+				outen |= PCI_CFG_GPIO_XTAL;
+			if (what & PLL)
+				outen |= PCI_CFG_GPIO_PLL;
+
+			if (on) {
+				/* turn primary xtal on */
+				if (what & XTAL) {
+					out |= PCI_CFG_GPIO_XTAL;
+					if (what & PLL)
+						out |= PCI_CFG_GPIO_PLL;
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
+					OSL_DELAY(XTAL_ON_DELAY);
+				}
+
+				/* turn pll on */
+				if (what & PLL) {
+					out &= ~PCI_CFG_GPIO_PLL;
+					OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+					OSL_DELAY(2000);
+				}
+			} else {
+				if (what & XTAL)
+					out &= ~PCI_CFG_GPIO_XTAL;
+				if (what & PLL)
+					out |= PCI_CFG_GPIO_PLL;
+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
+				OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
+			}
+
+		default:
+			return (-1);
+	}
+
+	return (0);
+}
+
+int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on)
+{
+return sb_clkctl_xtal(sbh,what,on);
+}
+
+/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
+/*   returns true if ignore pll off is set and false if it is not */
+bool
+sb_clkctl_clk(sb_t *sbh, uint mode)
+{
+	sb_info_t *si;
+	uint origidx;
+	chipcregs_t *cc;
+	uint32 scc;
+	bool forcefastclk=FALSE;
+	uint intr_val = 0;
+
+	si = SB_INFO(sbh);
+
+	/* chipcommon cores prior to rev6 don't support dynamic clock control */
+	if (si->sb.ccrev < 6)
+		return (FALSE);
+
+	/* chipcommon cores rev10 are a whole new ball game */
+	if (si->sb.ccrev >= 10)
+		return (FALSE);
+
+	INTR_OFF(si, intr_val);
+
+	origidx = si->curidx;
+
+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
+	ASSERT(cc != NULL);
+
+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+		goto done;
+
+	switch (mode) {
+	case CLK_FAST:	/* force fast (pll) clock */
+		/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
+		sb_clkctl_xtal(&si->sb, XTAL, ON);
+
+		SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
+		break;
+
+	case CLK_DYNAMIC:	/* enable dynamic clock control */
+		scc = R_REG(&cc->slow_clk_ctl);
+		scc &= ~(SCC_FS | SCC_IP | SCC_XC);
+		if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
+			scc |= SCC_XC;
+		W_REG(&cc->slow_clk_ctl, scc);
+
+		/* for dynamic control, we have to release our xtal_pu "force on" */
+		if (scc & SCC_XC)
+			sb_clkctl_xtal(&si->sb, XTAL, OFF);
+		break;
+
+	default:
+		ASSERT(0);
+	}
+
+	/* Is the h/w forcing the use of the fast clk */
+	forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
+
+done:
+	sb_setcoreidx(sbh, origidx);
+	INTR_RESTORE(si, intr_val);
+	return (forcefastclk);
+}
+
+bool sb_pwrctl_clk(sb_t *sbh, uint mode)
+{
+return sb_clkctl_clk(sbh, mode);
+}
+/* register driver interrupt disabling and restoring callback functions */
+void
+sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
+{
+	sb_info_t *si;
+
+	si = SB_INFO(sbh);
+	si->intr_arg = intr_arg;
+	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
+	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
+	si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
+	/* save current core id.  when this function called, the current core
+	 * must be the core which provides driver functions(il, et, wl, etc.)
+	 */
+	si->dev_coreid = si->coreid[si->curidx];
+}
+
+
+void
+sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, 
+	uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif)
+{
+	uint vendor, core, unit;
+	uint chip, chippkg;
+	char varname[8];
+	uint8 class, subclass, progif;
+	
+	vendor = sb_corevendor(sbh);
+	core = sb_coreid(sbh);
+	unit = sb_coreunit(sbh);
+
+	chip = BCMINIT(sb_chip)(sbh);
+	chippkg = BCMINIT(sb_chippkg)(sbh);
+
+	progif = 0;
+	
+	/* Known vendor translations */
+	switch (vendor) {
+	case SB_VEND_BCM:
+		vendor = VENDOR_BROADCOM;
+		break;
+	}
+
+	/* Determine class based on known core codes */
+	switch (core) {
+	case SB_ILINE20:
+		class = PCI_CLASS_NET;
+		subclass = PCI_NET_ETHER;
+		core = BCM47XX_ILINE_ID;
+		break;
+	case SB_ENET:
+		class = PCI_CLASS_NET;
+		subclass = PCI_NET_ETHER;
+		core = BCM47XX_ENET_ID;
+		break;
+	case SB_SDRAM:
+	case SB_MEMC:
+		class = PCI_CLASS_MEMORY;
+		subclass = PCI_MEMORY_RAM;
+		break;
+	case SB_PCI:
+	case SB_PCIE:
+		class = PCI_CLASS_BRIDGE;
+		subclass = PCI_BRIDGE_PCI;
+		break;
+	case SB_MIPS:
+	case SB_MIPS33:
+		class = PCI_CLASS_CPU;
+		subclass = PCI_CPU_MIPS;
+		break;
+	case SB_CODEC:
+		class = PCI_CLASS_COMM;
+		subclass = PCI_COMM_MODEM;
+		core = BCM47XX_V90_ID;
+		break;
+	case SB_USB:
+		class = PCI_CLASS_SERIAL;
+		subclass = PCI_SERIAL_USB;
+		progif = 0x10; /* OHCI */
+		core = BCM47XX_USB_ID;
+		break;
+	case SB_USB11H:
+		class = PCI_CLASS_SERIAL;
+		subclass = PCI_SERIAL_USB;
+		progif = 0x10; /* OHCI */
+		core = BCM47XX_USBH_ID;
+		break;
+	case SB_USB11D:
+		class = PCI_CLASS_SERIAL;
+		subclass = PCI_SERIAL_USB;
+		core = BCM47XX_USBD_ID;
+		break;
+	case SB_IPSEC:
+		class = PCI_CLASS_CRYPT;
+		subclass = PCI_CRYPT_NETWORK;
+		core = BCM47XX_IPSEC_ID;
+		break;
+	case SB_ROBO:
+		class = PCI_CLASS_NET;
+		subclass = PCI_NET_OTHER;
+		core = BCM47XX_ROBO_ID;
+		break;
+	case SB_EXTIF:
+	case SB_CC:
+		class = PCI_CLASS_MEMORY;
+		subclass = PCI_MEMORY_FLASH;
+		break;
+	case SB_D11:
+		class = PCI_CLASS_NET;
+		subclass = PCI_NET_OTHER;
+		/* Let an nvram variable override this */
+		sprintf(varname, "wl%did", unit);
+		if ((core = getintvar(NULL, varname)) == 0) {
+			if (chip == BCM4712_DEVICE_ID) {
+				if (chippkg == BCM4712SMALL_PKG_ID)
+					core = BCM4306_D11G_ID;
+				else
+					core = BCM4306_D11DUAL_ID;
+			}
+		}
+		break;
+
+	default:
+		class = subclass = progif = 0xff;
+		break;
+	}
+
+	*pcivendor = (uint16)vendor;
+	*pcidevice = (uint16)core;
+	*pciclass = class;
+	*pcisubclass = subclass;
+	*pciprogif = progif;
+}
+
+
+
+
+/* use the mdio interface to write to mdio slaves */
+static int 
+sb_pcie_mdiowrite(sb_info_t *si,  uint physmedia, uint regaddr, uint val)
+{
+	uint mdiodata;
+	uint i = 0;
+	sbpcieregs_t *pcieregs;
+
+	pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
+	ASSERT (pcieregs);
+
+	/* enable mdio access to SERDES */		
+	W_REG((&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
+
+	mdiodata = MDIODATA_START | MDIODATA_WRITE | 
+		(physmedia << MDIODATA_DEVADDR_SHF) |
+		(regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val;
+
+	W_REG((&pcieregs->mdiodata), mdiodata);
+
+	PR28829_DELAY();
+
+	/* retry till the transaction is complete */
+	while ( i < 10 ) {
+		if (R_REG(&(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) {
+			/* Disable mdio access to SERDES */		
+			W_REG((&pcieregs->mdiocontrol), 0);
+			return 0;
+		}
+		OSL_DELAY(1000);
+		i++;
+	}
+
+	SB_ERROR(("sb_pcie_mdiowrite: timed out\n"));
+	/* Disable mdio access to SERDES */		
+	W_REG((&pcieregs->mdiocontrol), 0);
+	ASSERT(0);
+	return 1; 
+
+}
+
+/* indirect way to read pcie config regs*/
+uint 
+sb_pcie_readreg(void *sb, void* arg1, uint offset)
+{
+	sb_info_t *si;
+	sb_t   *sbh;
+	uint retval = 0xFFFFFFFF;
+	sbpcieregs_t *pcieregs;	
+	uint addrtype;
+
+	sbh = (sb_t *)sb;
+	si = SB_INFO(sbh);
+	ASSERT (PCIE(si)); 
+
+	pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
+	ASSERT (pcieregs);
+
+	addrtype = (uint)((uintptr)arg1);
+	switch(addrtype) {
+		case PCIE_CONFIGREGS:
+			W_REG((&pcieregs->configaddr),offset);
+			retval = R_REG(&(pcieregs->configdata));
+			break;
+		case PCIE_PCIEREGS:
+			W_REG(&(pcieregs->pcieaddr),offset);
+			retval = R_REG(&(pcieregs->pciedata));
+			break;
+		default:
+			ASSERT(0); 
+			break;
+	}
+	return retval;
+}
+
+/* indirect way to write pcie config/mdio/pciecore regs*/
+uint 
+sb_pcie_writereg(sb_t *sbh, void *arg1,  uint offset, uint val)
+{
+	sb_info_t *si;
+	sbpcieregs_t *pcieregs;	
+	uint addrtype;
+
+	si = SB_INFO(sbh);
+	ASSERT (PCIE(si)); 
+
+	pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
+	ASSERT (pcieregs);
+
+	addrtype = (uint)((uintptr)arg1);
+
+	switch(addrtype) {
+		case PCIE_CONFIGREGS:
+			W_REG((&pcieregs->configaddr),offset);
+			W_REG((&pcieregs->configdata),val);
+			break;
+		case PCIE_PCIEREGS:
+			W_REG((&pcieregs->pcieaddr),offset);
+			W_REG((&pcieregs->pciedata),val);
+			break;
+		default:
+			ASSERT(0); 
+			break;
+	}
+	return 0;
+}
+
+
+/* Build device path. Support SB, PCI, and JTAG for now. */
+int
+sb_devpath(sb_t *sbh, char *path, int size)
+{
+	ASSERT(path);
+	ASSERT(size >= SB_DEVPATH_BUFSZ);
+	
+	switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) {
+	case SB_BUS:
+	case JTAG_BUS:
+		sprintf(path, "sb/%u/", sb_coreidx(sbh));
+		break;
+	case PCI_BUS:
+		ASSERT((SB_INFO(sbh))->osh);
+		sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh),
+			OSL_PCI_SLOT((SB_INFO(sbh))->osh));
+		break;
+	case PCMCIA_BUS:
+		SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n"));
+		SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n"));
+		sprintf(path, "pc/%u/%u/", 1, 1);
+		break;
+	case SDIO_BUS:
+		SB_ERROR(("sb_devpath: device 0 assumed\n"));
+		sprintf(path, "sd/%u/", sb_coreidx(sbh));
+		break;
+	default:
+		ASSERT(0);
+		break;
+	}
+
+	return 0;
+}
+
+/* Fix chip's configuration. The current core may be changed upon return */
+static int
+sb_pci_fixcfg(sb_info_t *si)
+{
+	uint origidx, pciidx;
+	sbpciregs_t *pciregs;
+	sbpcieregs_t *pcieregs;
+	uint16 val16, *reg16;
+	char name[SB_DEVPATH_BUFSZ+16], *value;
+	char devpath[SB_DEVPATH_BUFSZ];
+
+	ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
+
+	/* Fix PCI(e) SROM shadow area */
+	/* save the current index */
+	origidx = sb_coreidx(&si->sb);
+
+	/* check 'pi' is correct and fix it if not */
+	if (si->sb.buscoretype == SB_PCIE) {
+		pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0);
+		ASSERT(pcieregs);
+		reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
+	}
+	else if (si->sb.buscoretype == SB_PCI) {
+		pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0);
+		ASSERT(pciregs);
+		reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
+	}
+	else {
+		ASSERT(0);
+		return -1;
+	}
+	pciidx = sb_coreidx(&si->sb);
+	val16 = R_REG(reg16);
+	if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) {
+		val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK);
+		W_REG(reg16, val16);
+	}
+
+	/* restore the original index */
+	sb_setcoreidx(&si->sb, origidx);
+	
+	/* Fix bar0window */
+	/* !do it last, it changes the current core! */
+	if (sb_devpath(&si->sb, devpath, sizeof(devpath)))
+		return -1;
+	sprintf(name, "%sb0w", devpath);
+	if ((value = getvar(NULL, name))) {
+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32),
+			bcm_strtoul(value, NULL, 16));
+		/* update curidx since the current core is changed */
+		si->curidx = _sb_coreidx(si);
+		if (si->curidx == BADIDX) {
+			SB_ERROR(("sb_pci_fixcfg: bad core index\n"));
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
diff -urN linux.old/drivers/net/hnd/shared_ksyms.sh linux.dev/drivers/net/hnd/shared_ksyms.sh
--- linux.old/drivers/net/hnd/shared_ksyms.sh	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/hnd/shared_ksyms.sh	2005-11-07 21:57:07.917590250 +0100
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# Copyright 2004, Broadcom Corporation      
+# All Rights Reserved.      
+#       
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+#
+# $Id: shared_ksyms.sh,v 1.1 2005/03/16 13:50:00 wbx Exp $
+#
+
+cat <<EOF
+#include <linux/config.h>
+#include <linux/module.h>
+EOF
+
+for file in $* ; do
+    ${NM} $file | sed -ne 's/[0-9A-Fa-f]* [DT] \([^ ]*\)/extern void \1; EXPORT_SYMBOL(\1);/p'
+done
diff -urN linux.old/drivers/net/wireless/Config.in linux.dev/drivers/net/wireless/Config.in
--- linux.old/drivers/net/wireless/Config.in	2005-11-07 23:12:51.258929250 +0100
+++ linux.dev/drivers/net/wireless/Config.in	2005-11-07 21:57:07.941591750 +0100
@@ -13,6 +13,7 @@
 fi
 
 if [ "$CONFIG_PCI" = "y" ]; then
+   dep_tristate '    Proprietary Broadcom BCM43xx 802.11 Wireless support' CONFIG_WL
    dep_tristate '    Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)' CONFIG_PLX_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
    dep_tristate '    Hermes in TMD7160/NCP130 based PCI adaptor support (Pheecom WL-PCI etc.) (EXPERIMENTAL)' CONFIG_TMD_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
    dep_tristate '    Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)' CONFIG_PCI_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
diff -urN linux.old/drivers/net/wl/Makefile linux.dev/drivers/net/wl/Makefile
--- linux.old/drivers/net/wl/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/wl/Makefile	2005-11-07 21:57:07.941591750 +0100
@@ -0,0 +1,26 @@
+#
+# Makefile for the Broadcom wl driver
+#
+# Copyright 2004, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id: Makefile,v 1.2 2005/03/29 03:32:18 mbm Exp $
+
+EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include
+
+O_TARGET	:= wl.o
+
+obj-y		:= apsta_aeskeywrap.o apsta_aes.o apsta_bcmwpa.o apsta_d11ucode.o
+obj-y		+= apsta_hmac.o apsta_md5.o apsta_passhash.o apsta_prf.o apsta_rc4.o
+obj-y		+= apsta_rijndael-alg-fst.o apsta_sha1.o apsta_tkhash.o apsta_wlc_led.o
+obj-y		+= apsta_wlc_phy.o apsta_wlc_rate.o apsta_wlc_security.o 
+obj-y		+= apsta_wlc_sup.o apsta_wlc_wet.o apsta_wl_linux.o apsta_wlc.o
+
+obj-m		:= $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
diff -urN linux.old/drivers/parport/Config.in linux.dev/drivers/parport/Config.in
--- linux.old/drivers/parport/Config.in	2005-11-07 23:12:51.306932250 +0100
+++ linux.dev/drivers/parport/Config.in	2005-11-07 21:57:07.941591750 +0100
@@ -11,6 +11,7 @@
 tristate 'Parallel port support' CONFIG_PARPORT
 if [ "$CONFIG_PARPORT" != "n" ]; then
    dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
+   dep_tristate '  Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT
    if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
       if [ "$CONFIG_SERIAL" = "m" ]; then
          define_tristate CONFIG_PARPORT_PC_CML1 m
diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile
--- linux.old/drivers/parport/Makefile	2005-11-07 23:12:51.318933000 +0100
+++ linux.dev/drivers/parport/Makefile	2005-11-07 21:57:07.941591750 +0100
@@ -22,6 +22,7 @@
 
 obj-$(CONFIG_PARPORT)		+= parport.o
 obj-$(CONFIG_PARPORT_PC)	+= parport_pc.o
+obj-$(CONFIG_PARPORT_SPLINK)	+= parport_splink.o
 obj-$(CONFIG_PARPORT_PC_PCMCIA)	+= parport_cs.o
 obj-$(CONFIG_PARPORT_AMIGA)	+= parport_amiga.o
 obj-$(CONFIG_PARPORT_MFC3)	+= parport_mfc3.o
diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c
--- linux.old/drivers/parport/parport_splink.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/parport/parport_splink.c	2005-11-07 21:57:07.941591750 +0100
@@ -0,0 +1,345 @@
+/* Low-level parallel port routines for the ASUS WL-500g built-in port
+ *
+ * Author: Nuno Grilo <nuno.grilo@netcabo.pt>
+ * Based on parport_pc source
+ */
+  
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+
+#define SPLINK_ADDRESS 0xBF800010
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK  printk
+#else
+#define DPRINTK(stuff...)
+#endif
+
+
+/* __parport_splink_frob_control differs from parport_splink_frob_control in that
+ * it doesn't do any extra masking. */
+static __inline__ unsigned char __parport_splink_frob_control (struct parport *p,
+							   unsigned char mask,
+							   unsigned char val)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char *io = (unsigned char *) p->base;
+	unsigned char ctr = priv->ctr;
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG
+		"__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n",
+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+#endif
+	ctr = (ctr & ~mask) ^ val;
+	ctr &= priv->ctr_writable; /* only write writable bits. */
+	*(io+2) = ctr;
+	priv->ctr = ctr;	/* Update soft copy */
+	return ctr;
+}
+
+
+
+static void parport_splink_data_forward (struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
+	__parport_splink_frob_control (p, 0x20, 0);
+}
+
+static void parport_splink_data_reverse (struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
+	__parport_splink_frob_control (p, 0x20, 0x20);
+}
+
+/*
+static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n");
+        parport_generic_irq(irq, (struct parport *) dev_id, regs);
+}
+*/
+
+static void parport_splink_enable_irq(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n");
+	__parport_splink_frob_control (p, 0x10, 0x10);
+}
+
+static void parport_splink_disable_irq(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n");
+	__parport_splink_frob_control (p, 0x10, 0);
+}
+
+static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n");
+	s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
+	if (dev->irq_func &&
+            dev->port->irq != PARPORT_IRQ_NONE)
+                /* Set ackIntEn */
+                s->u.pc.ctr |= 0x10;
+}
+
+static void parport_splink_save_state(struct parport *p, struct parport_state *s)
+{
+	const struct parport_pc_private *priv = p->physport->private_data;
+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n");
+	s->u.pc.ctr = priv->ctr;
+}
+
+static void parport_splink_restore_state(struct parport *p, struct parport_state *s)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char *io = (unsigned char *) p->base;
+	unsigned char ctr = s->u.pc.ctr;
+
+	DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n");
+        *(io+2) = ctr;
+	priv->ctr = ctr;
+}
+
+static void parport_splink_setup_interrupt(void) {
+        return;
+}
+
+static void parport_splink_write_data(struct parport *p, unsigned char d) {
+	DPRINTK(KERN_DEBUG "parport_splink: write data called\n");
+        unsigned char *io = (unsigned char *) p->base;
+        *io = d;
+}
+
+static unsigned char parport_splink_read_data(struct parport *p) {
+	DPRINTK(KERN_DEBUG "parport_splink: read data called\n");
+        unsigned char *io = (unsigned char *) p->base;
+        return *io;
+}
+
+static void parport_splink_write_control(struct parport *p, unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	DPRINTK(KERN_DEBUG "parport_splink: write control called\n");
+	/* Take this out when drivers have adapted to the newer interface. */
+	if (d & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+			p->name, p->cad->name);
+		parport_splink_data_reverse (p);
+	}
+
+	__parport_splink_frob_control (p, wm, d & wm);
+}
+
+static unsigned char parport_splink_read_control(struct parport *p)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+	DPRINTK(KERN_DEBUG "parport_splink: read control called\n");
+	const struct parport_pc_private *priv = p->physport->private_data;
+	return priv->ctr & wm; /* Use soft copy */
+}
+
+static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask,
+				       unsigned char val)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	DPRINTK(KERN_DEBUG "parport_splink: frob control called\n");
+	/* Take this out when drivers have adapted to the newer interface. */
+	if (mask & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
+			p->name, p->cad->name,
+			(val & 0x20) ? "reverse" : "forward");
+		if (val & 0x20)
+			parport_splink_data_reverse (p);
+		else
+			parport_splink_data_forward (p);
+	}
+
+	/* Restrict mask and val to control lines. */
+	mask &= wm;
+	val &= wm;
+
+	return __parport_splink_frob_control (p, mask, val);
+}
+
+static unsigned char parport_splink_read_status(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "parport_splink: read status called\n");
+        unsigned char *io = (unsigned char *) p->base;
+        return *(io+1);
+}
+
+static void parport_splink_inc_use_count(void)
+{
+#ifdef MODULE
+	MOD_INC_USE_COUNT;
+#endif
+}
+
+static void parport_splink_dec_use_count(void)
+{
+#ifdef MODULE
+	MOD_DEC_USE_COUNT;
+#endif
+}
+
+static struct parport_operations parport_splink_ops = 
+{
+	parport_splink_write_data,
+	parport_splink_read_data,
+
+	parport_splink_write_control,
+	parport_splink_read_control,
+	parport_splink_frob_control,
+
+	parport_splink_read_status,
+
+	parport_splink_enable_irq,
+	parport_splink_disable_irq,
+
+	parport_splink_data_forward,
+	parport_splink_data_reverse,
+
+	parport_splink_init_state,
+	parport_splink_save_state,
+	parport_splink_restore_state,
+
+	parport_splink_inc_use_count,
+	parport_splink_dec_use_count,
+
+	parport_ieee1284_epp_write_data,
+	parport_ieee1284_epp_read_data,
+	parport_ieee1284_epp_write_addr,
+	parport_ieee1284_epp_read_addr,
+
+	parport_ieee1284_ecp_write_data,
+	parport_ieee1284_ecp_read_data,
+	parport_ieee1284_ecp_write_addr,
+
+	parport_ieee1284_write_compat,
+	parport_ieee1284_read_nibble,
+	parport_ieee1284_read_byte,
+};
+
+/* --- Initialisation code -------------------------------- */
+
+static struct parport *parport_splink_probe_port (unsigned long int base)
+{
+	struct parport_pc_private *priv;
+	struct parport_operations *ops;
+	struct parport *p;
+
+	if (check_mem_region(base, 3)) {
+		printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base);
+		return NULL;
+	}
+	priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
+	if (!priv) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+		return NULL;
+	}
+	ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
+	if (!ops) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+			base);
+		kfree (priv);
+		return NULL;
+	}
+	memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations));
+	priv->ctr = 0xc;
+	priv->ctr_writable = 0xff;
+
+	if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
+					PARPORT_DMA_NONE, ops))) {
+		printk (KERN_DEBUG "parport (0x%lx): registration failed!\n",
+			base);
+		kfree (priv);
+		kfree (ops);
+		return NULL;
+	}
+
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+	p->private_data = priv;
+
+	parport_proc_register(p);
+	request_mem_region (p->base, 3, p->name);
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+	parport_splink_write_data(p, 0);
+	parport_splink_data_forward (p);
+
+	/* Now that we've told the sharing engine about the port, and
+	   found out its characteristics, let the high-level drivers
+	   know about it. */
+	parport_announce_port (p);
+
+	DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n",
+		base);
+	return p;
+}
+
+static void parport_splink_unregister_port(struct parport *p) {
+	struct parport_pc_private *priv = p->private_data;
+	struct parport_operations *ops = p->ops;
+
+        if (p->irq != PARPORT_IRQ_NONE)
+		free_irq(p->irq, p);
+	release_mem_region(p->base, 3);
+        parport_proc_unregister(p);
+        kfree (priv);
+        parport_unregister_port(p);
+        kfree (ops);
+}
+
+
+int parport_splink_init(void)
+{	
+        int ret;
+        
+	DPRINTK(KERN_DEBUG "parport_splink init called\n");
+        parport_splink_setup_interrupt();
+        ret = !parport_splink_probe_port(SPLINK_ADDRESS);
+        
+        return ret;
+}
+
+void parport_splink_cleanup(void) {
+        struct parport *p = parport_enumerate(), *tmp;
+	DPRINTK(KERN_DEBUG "parport_splink cleanup called\n");
+        if (p->size) {
+                if (p->modes & PARPORT_MODE_PCSPP) {
+                        while(p) {
+                                tmp = p->next;
+                                parport_splink_unregister_port(p);
+                                p = tmp;
+                        }
+                }
+        }
+}
+
+MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>");
+MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port");
+MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_splink_init)
+module_exit(parport_splink_cleanup)
+
diff -urN linux.old/drivers/pcmcia/Makefile linux.dev/drivers/pcmcia/Makefile
--- linux.old/drivers/pcmcia/Makefile	2005-11-07 23:12:51.350935000 +0100
+++ linux.dev/drivers/pcmcia/Makefile	2005-11-07 21:57:07.941591750 +0100
@@ -74,6 +74,10 @@
 au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3)		+= au1000_hydrogen3.o
 au1000_ss-objs-$(CONFIG_MIPS_XXS1500) 		+= au1000_xxs1500.o
 
+obj-$(CONFIG_PCMCIA_BCM4710)	+= bcm4710_ss.o
+bcm4710_ss-objs					:= bcm4710_generic.o
+bcm4710_ss-objs					+= bcm4710_pcmcia.o
+
 obj-$(CONFIG_PCMCIA_SA1100)	+= sa1100_cs.o
 obj-$(CONFIG_PCMCIA_M8XX)	+= m8xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_SIBYTE)	+= sibyte_generic.o
@@ -112,5 +116,8 @@
 au1x00_ss.o: $(au1000_ss-objs-y)
 	$(LD) -r -o $@ $(au1000_ss-objs-y)
 
+bcm4710_ss.o: $(bcm4710_ss-objs)
+	$(LD) -r -o $@ $(bcm4710_ss-objs)
+
 yenta_socket.o: $(yenta_socket-objs)
 	$(LD) $(LD_RFLAG) -r -o $@ $(yenta_socket-objs)
diff -urN linux.old/drivers/pcmcia/bcm4710_generic.c linux.dev/drivers/pcmcia/bcm4710_generic.c
--- linux.old/drivers/pcmcia/bcm4710_generic.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/pcmcia/bcm4710_generic.c	2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,912 @@
+/*
+ *
+ * bcm47xx pcmcia driver
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Based on sa1100_generic.c from www.handhelds.org,
+ *	and au1000_generic.c from oss.sgi.com.
+ *
+ * $Id: bcm4710_generic.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/tqueue.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/bulkmem.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/bus_ops.h>
+#include "cs_internal.h"
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <typedefs.h>
+#include <bcm4710.h>
+#include <sbextif.h>
+
+#include "bcm4710pcmcia.h"
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+#endif
+
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller");
+
+/* This structure maintains housekeeping state for each socket, such
+ * as the last known values of the card detect pins, or the Card Services
+ * callback value associated with the socket:
+ */
+static struct bcm47xx_pcmcia_socket *pcmcia_socket;
+static int socket_count;
+
+
+/* Returned by the low-level PCMCIA interface: */
+static struct pcmcia_low_level *pcmcia_low_level;
+
+/* Event poll timer structure */
+static struct timer_list poll_timer;
+
+
+/* Prototypes for routines which are used internally: */
+
+static int  bcm47xx_pcmcia_driver_init(void);
+static void bcm47xx_pcmcia_driver_shutdown(void);
+static void bcm47xx_pcmcia_task_handler(void *data);
+static void bcm47xx_pcmcia_poll_event(unsigned long data);
+static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs);
+static struct tq_struct bcm47xx_pcmcia_task;
+
+#ifdef CONFIG_PROC_FS
+static int bcm47xx_pcmcia_proc_status(char *buf, char **start, 
+		off_t pos, int count, int *eof, void *data);
+#endif
+
+
+/* Prototypes for operations which are exported to the
+ * in-kernel PCMCIA core:
+ */
+
+static int bcm47xx_pcmcia_init(unsigned int sock);
+static int bcm47xx_pcmcia_suspend(unsigned int sock);
+static int bcm47xx_pcmcia_register_callback(unsigned int sock, 
+		void (*handler)(void *, unsigned int), void *info);
+static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap);
+static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value);
+static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state);
+static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state);
+static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io);
+static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io);
+static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem);
+static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem);
+#ifdef CONFIG_PROC_FS
+static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base);
+#endif
+
+static struct pccard_operations bcm47xx_pcmcia_operations = {
+	bcm47xx_pcmcia_init,
+	bcm47xx_pcmcia_suspend,
+	bcm47xx_pcmcia_register_callback,
+	bcm47xx_pcmcia_inquire_socket,
+	bcm47xx_pcmcia_get_status,
+	bcm47xx_pcmcia_get_socket,
+	bcm47xx_pcmcia_set_socket,
+	bcm47xx_pcmcia_get_io_map,
+	bcm47xx_pcmcia_set_io_map,
+	bcm47xx_pcmcia_get_mem_map,
+	bcm47xx_pcmcia_set_mem_map,
+#ifdef CONFIG_PROC_FS
+	bcm47xx_pcmcia_proc_setup
+#endif
+};
+
+
+/*
+ * bcm47xx_pcmcia_driver_init()
+ *
+ * This routine performs a basic sanity check to ensure that this
+ * kernel has been built with the appropriate board-specific low-level
+ * PCMCIA support, performs low-level PCMCIA initialization, registers
+ * this socket driver with Card Services, and then spawns the daemon
+ * thread which is the real workhorse of the socket driver.
+ *
+ * Please see linux/Documentation/arm/SA1100/PCMCIA for more information
+ * on the low-level kernel interface.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+static int __init bcm47xx_pcmcia_driver_init(void)
+{
+	servinfo_t info;
+	struct pcmcia_init pcmcia_init;
+	struct pcmcia_state state;
+	unsigned int i;
+	unsigned long tmp;
+
+
+	printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE);
+
+	CardServices(GetCardServicesInfo, &info);
+
+	if (info.Revision != CS_RELEASE_CODE) {
+		printk(KERN_ERR "Card Services release codes do not match\n");
+		return -1;
+	}
+
+#ifdef CONFIG_BCM4710
+	pcmcia_low_level=&bcm4710_pcmcia_ops;
+#else
+#error Unsupported Broadcom BCM47XX board.
+#endif
+
+	pcmcia_init.handler=bcm47xx_pcmcia_interrupt;
+
+	if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) {
+		printk(KERN_ERR "Unable to initialize PCMCIA service.\n");
+		return -EIO;
+	} else {
+		printk("\t%d PCMCIA sockets initialized.\n", socket_count);
+	}
+
+	pcmcia_socket = 
+		kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, 
+				GFP_KERNEL);
+	memset(pcmcia_socket, 0, 
+			sizeof(struct bcm47xx_pcmcia_socket) * socket_count);
+	if (!pcmcia_socket) {
+		printk(KERN_ERR "Card Services can't get memory \n");
+		return -1;
+	}
+			
+	for (i = 0; i < socket_count; i++) {
+		if (pcmcia_low_level->socket_state(i, &state) < 0) {
+			printk(KERN_ERR "Unable to get PCMCIA status\n");
+			return -EIO;
+		}
+		pcmcia_socket[i].k_state = state;
+		pcmcia_socket[i].cs_state.csc_mask = SS_DETECT;
+		
+		if (i == 0) {
+			pcmcia_socket[i].virt_io =
+				(unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000);
+			/* Substract ioport base which gets added by in/out */
+			pcmcia_socket[i].virt_io -= mips_io_port_base;
+			pcmcia_socket[i].phys_attr =
+				(unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF);
+			pcmcia_socket[i].phys_mem =
+				(unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF);
+		} else  {
+			printk(KERN_ERR "bcm4710: socket 1 not supported\n");
+			return 1;
+		}
+	}
+
+	/* Only advertise as many sockets as we can detect: */
+	if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) {
+		printk(KERN_ERR "Unable to register socket service routine\n");
+		return -ENXIO;
+	}
+
+	/* Start the event poll timer.  
+	 * It will reschedule by itself afterwards. 
+	 */
+	bcm47xx_pcmcia_poll_event(0);
+
+	DEBUG(1, "bcm4710: initialization complete\n");
+	return 0;
+
+}
+
+module_init(bcm47xx_pcmcia_driver_init);
+
+
+/*
+ * bcm47xx_pcmcia_driver_shutdown()
+ *
+ * Invokes the low-level kernel service to free IRQs associated with this
+ * socket controller and reset GPIO edge detection.
+ */
+static void __exit bcm47xx_pcmcia_driver_shutdown(void)
+{
+	int i;
+
+	del_timer_sync(&poll_timer);
+	unregister_ss_entry(&bcm47xx_pcmcia_operations);
+	pcmcia_low_level->shutdown();
+	flush_scheduled_tasks();
+	for (i = 0; i < socket_count; i++) {
+		if (pcmcia_socket[i].virt_io) 
+			iounmap((void *)pcmcia_socket[i].virt_io);
+		if (pcmcia_socket[i].phys_attr) 
+			iounmap((void *)pcmcia_socket[i].phys_attr);
+		if (pcmcia_socket[i].phys_mem) 
+			iounmap((void *)pcmcia_socket[i].phys_mem);
+	}
+	DEBUG(1, "bcm4710: shutdown complete\n");
+}
+
+module_exit(bcm47xx_pcmcia_driver_shutdown);
+
+/*
+ * bcm47xx_pcmcia_init()
+ * We perform all of the interesting initialization tasks in 
+ * bcm47xx_pcmcia_driver_init().
+ *
+ * Returns: 0
+ */
+static int bcm47xx_pcmcia_init(unsigned int sock)
+{
+	DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock);
+
+	return 0;
+}
+
+/*
+ * bcm47xx_pcmcia_suspend()
+ *
+ * We don't currently perform any actions on a suspend.
+ *
+ * Returns: 0
+ */
+static int bcm47xx_pcmcia_suspend(unsigned int sock)
+{
+	DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock);
+
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_events()
+ *
+ * Helper routine to generate a Card Services event mask based on
+ * state information obtained from the kernel low-level PCMCIA layer
+ * in a recent (and previous) sampling. Updates `prev_state'.
+ *
+ * Returns: an event mask for the given socket state.
+ */
+static inline unsigned 
+bcm47xx_pcmcia_events(struct pcmcia_state *state, 
+		struct pcmcia_state *prev_state, 
+		unsigned int mask, unsigned int flags)
+{
+	unsigned int events=0;
+
+	if (state->bvd1 != prev_state->bvd1) {
+
+		DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1);
+
+		events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD;
+	}
+
+	if (state->bvd2 != prev_state->bvd2) {
+
+		DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2);
+
+		events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN;
+	}
+
+	if (state->detect != prev_state->detect) {
+
+		DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect);
+
+		events |= mask & SS_DETECT;
+	}
+
+
+	if (state->ready != prev_state->ready) {
+
+		DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready);
+
+		events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY);
+	}
+
+	if (events != 0) {
+		DEBUG(2, "events: %s%s%s%s%s\n",
+		      (events & SS_DETECT) ? "DETECT " : "",
+		      (events & SS_READY) ? "READY " : "",
+		      (events & SS_BATDEAD) ? "BATDEAD " : "",
+		      (events & SS_BATWARN) ? "BATWARN " : "",
+		      (events & SS_STSCHG) ? "STSCHG " : "");
+	}
+
+	*prev_state=*state;
+	return events;
+}
+
+
+/* 
+ * bcm47xx_pcmcia_task_handler()
+ *
+ * Processes serviceable socket events using the "eventd" thread context.
+ *
+ * Event processing (specifically, the invocation of the Card Services event
+ * callback) occurs in this thread rather than in the actual interrupt
+ * handler due to the use of scheduling operations in the PCMCIA core.
+ */
+static void bcm47xx_pcmcia_task_handler(void *data) 
+{
+	struct pcmcia_state state;
+	int i, events, irq_status;
+
+	DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__);
+
+	for (i = 0; i < socket_count; i++)  {
+		if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0)
+			printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n");
+
+		events = bcm47xx_pcmcia_events(&state, 
+					       &pcmcia_socket[i].k_state, 
+					       pcmcia_socket[i].cs_state.csc_mask, 
+					       pcmcia_socket[i].cs_state.flags);
+
+		if (pcmcia_socket[i].handler != NULL) {
+			pcmcia_socket[i].handler(pcmcia_socket[i].handler_info,
+						 events);
+		}
+	}
+}
+
+static struct tq_struct bcm47xx_pcmcia_task = {
+	routine: bcm47xx_pcmcia_task_handler
+};
+
+
+/*
+ * bcm47xx_pcmcia_poll_event()
+ *
+ * Let's poll for events in addition to IRQs since IRQ only is unreliable...
+ */
+static void bcm47xx_pcmcia_poll_event(unsigned long dummy)
+{
+	DEBUG(4, "%s(): polling for events\n", __FUNCTION__);
+
+	poll_timer.function = bcm47xx_pcmcia_poll_event;
+	poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD;
+	add_timer(&poll_timer);
+	schedule_task(&bcm47xx_pcmcia_task);
+}
+
+
+/* 
+ * bcm47xx_pcmcia_interrupt()
+ *
+ * Service routine for socket driver interrupts (requested by the
+ * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()).
+ *
+ * The actual interrupt-servicing work is performed by
+ * bcm47xx_pcmcia_task(), largely because the Card Services event-
+ * handling code performs scheduling operations which cannot be
+ * executed from within an interrupt context.
+ */
+static void 
+bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+	DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq);
+	schedule_task(&bcm47xx_pcmcia_task);
+}
+
+
+/*
+ * bcm47xx_pcmcia_register_callback()
+ *
+ * Implements the register_callback() operation for the in-kernel
+ * PCMCIA service (formerly SS_RegisterCallback in Card Services). If 
+ * the function pointer `handler' is not NULL, remember the callback 
+ * location in the state for `sock', and increment the usage counter 
+ * for the driver module. (The callback is invoked from the interrupt
+ * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services
+ * of interesting events.) Otherwise, clear the callback pointer in the
+ * socket state and decrement the module usage count.
+ *
+ * Returns: 0
+ */
+static int 
+bcm47xx_pcmcia_register_callback(unsigned int sock, 
+		void (*handler)(void *, unsigned int), void *info)
+{
+	if (handler == NULL) {
+		pcmcia_socket[sock].handler = NULL;
+		MOD_DEC_USE_COUNT;
+	} else {
+		MOD_INC_USE_COUNT;
+		pcmcia_socket[sock].handler = handler;
+		pcmcia_socket[sock].handler_info = info;
+	}
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_inquire_socket()
+ *
+ * Implements the inquire_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_InquireSocket in Card Services). Of note is
+ * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of
+ * `cap' to "trick" Card Services into tolerating large "I/O memory" 
+ * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory
+ * resource database check. (Mapped memory is set up within the socket
+ * driver itself.)
+ *
+ * In conjunction with the STATIC_MAP capability is a new field,
+ * `io_offset', recommended by David Hinds. Rather than go through
+ * the SetIOMap interface (which is not quite suited for communicating
+ * window locations up from the socket driver), we just pass up
+ * an offset which is applied to client-requested base I/O addresses
+ * in alloc_io_space().
+ *
+ * Returns: 0 on success, -1 if no pin has been configured for `sock'
+ */
+static int
+bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap)
+{
+	struct pcmcia_irq_info irq_info;
+
+	if (sock >= socket_count) {
+		printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock);
+		return -1;
+	}
+
+	/* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the
+	 *   force_low argument to validate_mem() in rsrc_mgr.c -- since in
+	 *   general, the mapped * addresses of the PCMCIA memory regions
+	 *   will not be within 0xffff, setting force_low would be
+	 *   undesirable.
+	 *
+	 * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory
+	 *   resource database; we instead pass up physical address ranges
+	 *   and allow other parts of Card Services to deal with remapping.
+	 *
+	 * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but
+	 *   not 32-bit CardBus devices.
+	 */
+	cap->features = (SS_CAP_PAGE_REGS  | SS_CAP_STATIC_MAP | SS_CAP_PCCARD);
+
+	irq_info.sock = sock;
+	irq_info.irq = -1;
+
+	if (pcmcia_low_level->get_irq_info(&irq_info) < 0) {
+		printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock);
+		return -1;
+	}
+
+	cap->irq_mask = 0;
+	cap->map_size = PAGE_SIZE;
+	cap->pci_irq = irq_info.irq;
+	cap->io_offset = pcmcia_socket[sock].virt_io;
+
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_get_status()
+ *
+ * Implements the get_status() operation for the in-kernel PCMCIA
+ * service (formerly SS_GetStatus in Card Services). Essentially just
+ * fills in bits in `status' according to internal driver state or
+ * the value of the voltage detect chipselect register.
+ *
+ * As a debugging note, during card startup, the PCMCIA core issues
+ * three set_socket() commands in a row the first with RESET deasserted,
+ * the second with RESET asserted, and the last with RESET deasserted
+ * again. Following the third set_socket(), a get_status() command will
+ * be issued. The kernel is looking for the SS_READY flag (see
+ * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
+ *
+ * Returns: 0
+ */
+static int 
+bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status)
+{
+	struct pcmcia_state state;
+
+
+	if ((pcmcia_low_level->socket_state(sock, &state)) < 0) {
+		printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
+		return -1;
+	}
+
+	pcmcia_socket[sock].k_state = state;
+
+	*status = state.detect ? SS_DETECT : 0;
+
+	*status |= state.ready ? SS_READY : 0;
+
+	/* The power status of individual sockets is not available
+	 * explicitly from the hardware, so we just remember the state
+	 * and regurgitate it upon request:
+	 */
+	*status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0;
+
+	if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD)
+		*status |= state.bvd1 ? SS_STSCHG : 0;
+	else {
+		if (state.bvd1 == 0)
+			*status |= SS_BATDEAD;
+		else if (state.bvd2 == 0)
+			*status |= SS_BATWARN;
+	}
+
+	*status |= state.vs_3v ? SS_3VCARD : 0;
+
+	*status |= state.vs_Xv ? SS_XVCARD : 0;
+
+	DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n",
+	      (*status&SS_DETECT)?"DETECT ":"",
+	      (*status&SS_READY)?"READY ":"", 
+	      (*status&SS_BATDEAD)?"BATDEAD ":"",
+	      (*status&SS_BATWARN)?"BATWARN ":"",
+	      (*status&SS_POWERON)?"POWERON ":"",
+	      (*status&SS_STSCHG)?"STSCHG ":"",
+	      (*status&SS_3VCARD)?"3VCARD ":"",
+	      (*status&SS_XVCARD)?"XVCARD ":"");
+
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_get_socket()
+ *
+ * Implements the get_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_GetSocket in Card Services). Not a very 
+ * exciting routine.
+ *
+ * Returns: 0
+ */
+static int 
+bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state)
+{
+	DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
+
+	/* This information was given to us in an earlier call to set_socket(),
+	 * so we're just regurgitating it here:
+	 */
+	*state = pcmcia_socket[sock].cs_state;
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_set_socket()
+ *
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ *
+ * Returns: 0
+ */
+static int 
+bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state)
+{
+	struct pcmcia_configure configure;
+
+	DEBUG(2, "\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n"
+	      "\tVcc %d  Vpp %d  irq %d\n",
+	      (state->csc_mask == 0) ? "<NONE>" : "",
+	      (state->csc_mask & SS_DETECT) ? "DETECT " : "",
+	      (state->csc_mask & SS_READY) ? "READY " : "",
+	      (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "",
+	      (state->csc_mask & SS_BATWARN) ? "BATWARN " : "",
+	      (state->csc_mask & SS_STSCHG) ? "STSCHG " : "",
+	      (state->flags == 0) ? "<NONE>" : "",
+	      (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "",
+	      (state->flags & SS_IOCARD) ? "IOCARD " : "",
+	      (state->flags & SS_RESET) ? "RESET " : "",
+	      (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "",
+	      (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "",
+	      state->Vcc, state->Vpp, state->io_irq);
+
+	configure.sock = sock;
+	configure.vcc = state->Vcc;
+	configure.vpp = state->Vpp;
+	configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0;
+	configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0;
+	configure.reset = (state->flags & SS_RESET) ? 1 : 0;
+
+	if (pcmcia_low_level->configure_socket(&configure) < 0) {
+		printk(KERN_ERR "Unable to configure socket %u\n", sock);
+		return -1;
+	}
+
+	pcmcia_socket[sock].cs_state = *state;
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_get_io_map()
+ *
+ * Implements the get_io_map() operation for the in-kernel PCMCIA
+ * service (formerly SS_GetIOMap in Card Services). Just returns an
+ * I/O map descriptor which was assigned earlier by a set_io_map().
+ *
+ * Returns: 0 on success, -1 if the map index was out of range
+ */
+static int 
+bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map)
+{
+	DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock);
+
+	if (map->map >= MAX_IO_WIN) {
+		printk(KERN_ERR "%s(): map (%d) out of range\n", 
+		       __FUNCTION__, map->map);
+		return -1;
+	}
+
+	*map = pcmcia_socket[sock].io_map[map->map];
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_set_io_map()
+ *
+ * Implements the set_io_map() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetIOMap in Card Services). We configure
+ * the map speed as requested, but override the address ranges
+ * supplied by Card Services.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int 
+bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map)
+{
+	unsigned int speed;
+	unsigned long start;
+
+	DEBUG(2, "\tmap %u  speed %u\n\tstart 0x%08lx  stop 0x%08lx\n"
+	      "\tflags: %s%s%s%s%s%s%s%s\n",
+	      map->map, map->speed, map->start, map->stop,
+	      (map->flags == 0) ? "<NONE>" : "",
+	      (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
+	      (map->flags & MAP_16BIT) ? "16BIT " : "",
+	      (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
+	      (map->flags & MAP_0WS) ? "0WS " : "",
+	      (map->flags & MAP_WRPROT) ? "WRPROT " : "",
+	      (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
+	      (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
+
+	if (map->map >= MAX_IO_WIN) {
+		printk(KERN_ERR "%s(): map (%d) out of range\n", 
+				__FUNCTION__, map->map);
+		return -1;
+	}
+
+	if (map->flags & MAP_ACTIVE) {
+		speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED;
+		pcmcia_socket[sock].speed_io = speed;
+	}
+
+	start = map->start;
+
+	if (map->stop == 1) {
+		map->stop = PAGE_SIZE - 1;
+	}
+
+	map->start = pcmcia_socket[sock].virt_io;
+	map->stop = map->start + (map->stop - start);
+	pcmcia_socket[sock].io_map[map->map] = *map;
+	DEBUG(2, "set_io_map %d start %x stop %x\n", 
+	      map->map, map->start, map->stop);
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_get_mem_map()
+ *
+ * Implements the get_mem_map() operation for the in-kernel PCMCIA
+ * service (formerly SS_GetMemMap in Card Services). Just returns a
+ *  memory map descriptor which was assigned earlier by a
+ *  set_mem_map() request.
+ *
+ * Returns: 0 on success, -1 if the map index was out of range
+ */
+static int 
+bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map)
+{
+	DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock);
+
+	if (map->map >= MAX_WIN) {
+		printk(KERN_ERR "%s(): map (%d) out of range\n", 
+		       __FUNCTION__, map->map);
+		return -1;
+	}
+
+	*map = pcmcia_socket[sock].mem_map[map->map];
+	return 0;
+}
+
+
+/*
+ * bcm47xx_pcmcia_set_mem_map()
+ *
+ * Implements the set_mem_map() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetMemMap in Card Services). We configure
+ * the map speed as requested, but override the address ranges
+ * supplied by Card Services.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+static int 
+bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map)
+{
+	unsigned int speed;
+	unsigned long start;
+	u_long flags;
+
+	if (map->map >= MAX_WIN) {
+		printk(KERN_ERR "%s(): map (%d) out of range\n", 
+		       __FUNCTION__, map->map);
+		return -1;
+	}
+
+	DEBUG(2, "\tmap %u  speed %u\n\tsys_start  %#lx\n"
+	      "\tsys_stop   %#lx\n\tcard_start %#x\n"
+	      "\tflags: %s%s%s%s%s%s%s%s\n",
+	      map->map, map->speed, map->sys_start, map->sys_stop,
+	      map->card_start, (map->flags == 0) ? "<NONE>" : "",
+	      (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
+	      (map->flags & MAP_16BIT) ? "16BIT " : "",
+	      (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
+	      (map->flags & MAP_0WS) ? "0WS " : "",
+	      (map->flags & MAP_WRPROT) ? "WRPROT " : "",
+	      (map->flags & MAP_ATTRIB) ? "ATTRIB " : "",
+	      (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "");
+
+	if (map->flags & MAP_ACTIVE) {
+		/* When clients issue RequestMap, the access speed is not always
+		 * properly configured:
+		 */
+		speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED;
+
+		/* TBD */
+		if (map->flags & MAP_ATTRIB) {
+			pcmcia_socket[sock].speed_attr = speed;
+		} else {
+			pcmcia_socket[sock].speed_mem = speed;
+		}
+	}
+
+	save_flags(flags);
+	cli();
+	start = map->sys_start;
+
+	if (map->sys_stop == 0)
+		map->sys_stop = PAGE_SIZE - 1;
+
+	if (map->flags & MAP_ATTRIB) {
+		map->sys_start = pcmcia_socket[sock].phys_attr + 
+			map->card_start;
+	} else {
+		map->sys_start = pcmcia_socket[sock].phys_mem + 
+			map->card_start;
+	}
+
+	map->sys_stop = map->sys_start + (map->sys_stop - start);
+	pcmcia_socket[sock].mem_map[map->map] = *map;
+	restore_flags(flags);
+	DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", 
+			map->map, map->sys_start, map->sys_stop, 
+			map->card_start);
+	return 0;
+}
+
+
+#if defined(CONFIG_PROC_FS)
+
+/*
+ * bcm47xx_pcmcia_proc_setup()
+ *
+ * Implements the proc_setup() operation for the in-kernel PCMCIA
+ * service (formerly SS_ProcSetup in Card Services).
+ *
+ * Returns: 0 on success, -1 on error
+ */
+static void 
+bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base)
+{
+	struct proc_dir_entry *entry;
+
+	if ((entry = create_proc_entry("status", 0, base)) == NULL) {
+		printk(KERN_ERR "Unable to install \"status\" procfs entry\n");
+		return;
+	}
+
+	entry->read_proc = bcm47xx_pcmcia_proc_status;
+	entry->data = (void *)sock;
+}
+
+
+/*
+ * bcm47xx_pcmcia_proc_status()
+ *
+ * Implements the /proc/bus/pccard/??/status file.
+ *
+ * Returns: the number of characters added to the buffer
+ */
+static int 
+bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, 
+			   int count, int *eof, void *data)
+{
+	char *p = buf;
+	unsigned int sock = (unsigned int)data;
+
+	p += sprintf(p, "k_flags  : %s%s%s%s%s%s%s\n", 
+		     pcmcia_socket[sock].k_state.detect ? "detect " : "",
+		     pcmcia_socket[sock].k_state.ready ? "ready " : "",
+		     pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "",
+		     pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "",
+		     pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "",
+		     pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "",
+		     pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : "");
+
+	p += sprintf(p, "status   : %s%s%s%s%s%s%s%s%s\n",
+		     pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "",
+		     pcmcia_socket[sock].k_state.ready ? "SS_READY " : "",
+		     pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "",
+		     pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "",
+		     (pcmcia_socket[sock].cs_state.flags & SS_IOCARD &&
+		      pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "",
+		     ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
+		      (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "",
+		     ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 &&
+		      (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "",
+		     pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "",
+		     pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : "");
+
+	p += sprintf(p, "mask     : %s%s%s%s%s\n",
+		     pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "",
+		     pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "",
+		     pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "",
+		     pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "",
+		     pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : "");
+
+	p += sprintf(p, "cs_flags : %s%s%s%s%s\n",
+		     pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ?
+			"SS_PWR_AUTO " : "",
+		     pcmcia_socket[sock].cs_state.flags & SS_IOCARD ?
+			"SS_IOCARD " : "",
+		     pcmcia_socket[sock].cs_state.flags & SS_RESET ?
+			"SS_RESET " : "",
+		     pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ?
+			"SS_SPKR_ENA " : "",
+		     pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ?
+			"SS_OUTPUT_ENA " : "");
+
+	p += sprintf(p, "Vcc      : %d\n", pcmcia_socket[sock].cs_state.Vcc);
+	p += sprintf(p, "Vpp      : %d\n", pcmcia_socket[sock].cs_state.Vpp);
+	p += sprintf(p, "irq      : %d\n", pcmcia_socket[sock].cs_state.io_irq);
+	p += sprintf(p, "I/O      : %u\n", pcmcia_socket[sock].speed_io);
+	p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr);
+	p += sprintf(p, "common   : %u\n", pcmcia_socket[sock].speed_mem);
+	return p-buf;
+}
+
+
+#endif  /* defined(CONFIG_PROC_FS) */
diff -urN linux.old/drivers/pcmcia/bcm4710_pcmcia.c linux.dev/drivers/pcmcia/bcm4710_pcmcia.c
--- linux.old/drivers/pcmcia/bcm4710_pcmcia.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/pcmcia/bcm4710_pcmcia.c	2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,266 @@
+/*
+ * BCM4710 specific pcmcia routines.
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcm4710_pcmcia.c,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/tqueue.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/bulkmem.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/bus_ops.h>
+#include "cs_internal.h"
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+
+#include <typedefs.h>
+#include <bcmdevs.h>
+#include <bcm4710.h>
+#include <sbconfig.h>
+#include <sbextif.h>
+
+#include "bcm4710pcmcia.h"
+
+/* Use a static var for irq dev_id */
+static int bcm47xx_pcmcia_dev_id;
+
+/* Do we think we have a card or not? */
+static int bcm47xx_pcmcia_present = 0;
+
+
+static void bcm4710_pcmcia_reset(void)
+{
+	extifregs_t *eir;
+	unsigned long s;
+	uint32 out0, out1, outen;
+
+
+	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
+
+	save_and_cli(s);
+
+	/* Use gpio7 to reset the pcmcia slot */
+	outen = readl(&eir->gpio[0].outen);
+	outen |= BCM47XX_PCMCIA_RESET;
+	out0 = readl(&eir->gpio[0].out);
+	out0 &= ~(BCM47XX_PCMCIA_RESET);
+	out1 = out0 | BCM47XX_PCMCIA_RESET;
+
+	writel(out0, &eir->gpio[0].out);
+	writel(outen, &eir->gpio[0].outen);
+	mdelay(1);
+	writel(out1, &eir->gpio[0].out);
+	mdelay(1);
+	writel(out0, &eir->gpio[0].out);
+
+	restore_flags(s);
+}
+
+
+static int bcm4710_pcmcia_init(struct pcmcia_init *init)
+{
+	struct pci_dev *pdev;
+	extifregs_t *eir;
+	uint32 outen, intp, intm, tmp;
+	uint16 *attrsp;
+	int rc = 0, i;
+	extern unsigned long bcm4710_cpu_cycle;
+
+
+	if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) {
+		printk(KERN_ERR "bcm4710_pcmcia: extif not found\n");
+		return -ENODEV;
+	}
+	eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+
+	/* Initialize the pcmcia i/f: 16bit no swap */
+	writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config);
+
+#ifdef	notYet
+
+	/* Set the timing for memory accesses */
+	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
+	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
+	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
+	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
+	writel(tmp, &eir->pcmcia_memwait);		/* 0x01020a0c for a 100Mhz clock */
+
+	/* Set the timing for I/O accesses */
+	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
+	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
+	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
+	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
+	writel(tmp, &eir->pcmcia_iowait);		/* 0x01020a0c for a 100Mhz clock */
+
+	/* Set the timing for attribute accesses */
+	tmp = (19 / bcm4710_cpu_cycle) << 24;		/* W3 = 10nS */
+	tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16);	/* W2 = 20nS */
+	tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8);	/* W1 = 100nS */
+	tmp = tmp | (129 / bcm4710_cpu_cycle);		/* W0 = 120nS */
+	writel(tmp, &eir->pcmcia_attrwait);		/* 0x01020a0c for a 100Mhz clock */
+
+#endif
+	/* Make sure gpio0 and gpio5 are inputs */
+	outen = readl(&eir->gpio[0].outen);
+	outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET);
+	writel(outen, &eir->gpio[0].outen);
+
+	/* Issue a reset to the pcmcia socket */
+	bcm4710_pcmcia_reset();
+
+#ifdef	DO_BCM47XX_PCMCIA_INTERRUPTS
+	/* Setup gpio5 to be the STSCHG interrupt */
+	intp = readl(&eir->gpiointpolarity);
+	writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity);	/* Active low */
+	intm = readl(&eir->gpiointmask);
+	writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask);	/* Enable it */
+#endif
+
+	DEBUG(2, "bcm4710_pcmcia after reset:\n");
+	DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus));
+	DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config));
+	DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait));
+	DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait));
+	DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait));
+	DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin));
+	DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen));
+	DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out));
+	DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity));
+	DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask));
+
+#ifdef	DO_BCM47XX_PCMCIA_INTERRUPTS
+	/* Request pcmcia interrupt */
+	rc =  request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT,
+			  "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id);
+#endif
+
+	attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000);
+	tmp = readw(&attrsp[0]);
+	DEBUG(2, "\tattr[0] = 0x%04x\n", tmp);
+	if ((tmp == 0x7fff) || (tmp == 0x7f00)) {
+		bcm47xx_pcmcia_present = 0;
+	} else {
+		bcm47xx_pcmcia_present = 1;
+	}
+
+	/* There's only one socket */
+	return 1;
+}
+
+static int bcm4710_pcmcia_shutdown(void)
+{
+	extifregs_t *eir;
+	uint32 intm;
+
+	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
+
+	/* Disable the pcmcia i/f */
+	writel(0, &eir->pcmcia_config);
+
+	/* Reset gpio's */
+	intm = readl(&eir->gpiointmask);
+	writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask);	/* Disable it */
+
+	free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id);
+
+	return 0;
+}
+
+static int 
+bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
+{
+	extifregs_t *eir;
+
+	eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t));
+
+
+	if (sock != 0) {
+		printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock);
+		return -1;
+	}
+
+	if (bcm47xx_pcmcia_present) {
+		state->detect = 1;
+		state->ready = 1;
+		state->bvd1 = 1;
+		state->bvd2 = 1;
+		state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; 
+		state->vs_3v = 0;
+		state->vs_Xv = 0;
+	} else {
+		state->detect = 0;
+		state->ready = 0;
+	}
+
+	return 1;
+}
+
+
+static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
+{
+	if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1;
+
+	info->irq = BCM47XX_PCMCIA_IRQ;		
+
+	return 0;
+}
+
+
+static int 
+bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure)
+{
+	if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1;
+
+
+	DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc,
+	      configure->vpp, configure->output, configure->speaker, configure->reset);
+
+	if ((configure->vcc != 50) || (configure->vpp != 50)) {
+		printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, 
+		       configure->vpp);
+	}
+
+	if (configure->reset) {
+		/* Issue a reset to the pcmcia socket */
+		DEBUG(1, "%s: Reseting socket\n", __FUNCTION__);
+		bcm4710_pcmcia_reset();
+	}
+
+
+	return 0;
+}
+
+struct pcmcia_low_level bcm4710_pcmcia_ops = { 
+	bcm4710_pcmcia_init,
+	bcm4710_pcmcia_shutdown,
+	bcm4710_pcmcia_socket_state,
+	bcm4710_pcmcia_get_irq_info,
+	bcm4710_pcmcia_configure_socket
+};
+
diff -urN linux.old/drivers/pcmcia/bcm4710pcmcia.h linux.dev/drivers/pcmcia/bcm4710pcmcia.h
--- linux.old/drivers/pcmcia/bcm4710pcmcia.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/pcmcia/bcm4710pcmcia.h	2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,118 @@
+/*
+ *
+ * bcm47xx pcmcia driver
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h
+ *	from www.handhelds.org,
+ * and au1000_generic.c from oss.sgi.com.
+ *
+ * $Id: bcm4710pcmcia.h,v 1.1 2005/03/16 13:50:00 wbx Exp $
+ */
+
+#if !defined(_BCM4710PCMCIA_H)
+#define _BCM4710PCMCIA_H
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/bulkmem.h>
+#include <pcmcia/cistpl.h>
+#include "cs_internal.h"
+
+
+/* The 47xx can only support one socket */
+#define BCM47XX_PCMCIA_MAX_SOCK		1
+
+/* In the bcm947xx gpio's are used for some pcmcia functions */
+#define	BCM47XX_PCMCIA_WP		0x01		/* Bit 0 is WP input */
+#define	BCM47XX_PCMCIA_STSCHG		0x20		/* Bit 5 is STSCHG input/interrupt */
+#define	BCM47XX_PCMCIA_RESET		0x80		/* Bit 7 is RESET */
+
+#define	BCM47XX_PCMCIA_IRQ		2
+
+/* The socket driver actually works nicely in interrupt-driven form,
+ * so the (relatively infrequent) polling is "just to be sure."
+ */
+#define BCM47XX_PCMCIA_POLL_PERIOD    (2 * HZ)
+
+#define BCM47XX_PCMCIA_IO_SPEED       (255)
+#define BCM47XX_PCMCIA_MEM_SPEED      (300)
+
+
+struct pcmcia_state {
+	unsigned detect: 1,
+		ready: 1,
+		bvd1: 1,
+		bvd2: 1,
+		wrprot: 1,
+		vs_3v: 1,
+		vs_Xv: 1;
+};
+
+
+struct pcmcia_configure {
+	unsigned sock: 8,
+		vcc: 8,
+		vpp: 8,
+		output: 1,
+		speaker: 1,
+		reset: 1;
+};
+
+struct pcmcia_irq_info {
+	unsigned int sock;
+	unsigned int irq;
+};
+
+/* This structure encapsulates per-socket state which we might need to
+ * use when responding to a Card Services query of some kind.
+ */
+struct bcm47xx_pcmcia_socket {
+  socket_state_t        cs_state;
+  struct pcmcia_state   k_state;
+  unsigned int          irq;
+  void                  (*handler)(void *, unsigned int);
+  void                  *handler_info;
+  pccard_io_map         io_map[MAX_IO_WIN];
+  pccard_mem_map        mem_map[MAX_WIN];
+  ioaddr_t              virt_io, phys_attr, phys_mem;
+  unsigned short        speed_io, speed_attr, speed_mem;
+};
+
+struct pcmcia_init {
+	void (*handler)(int irq, void *dev, struct pt_regs *regs);
+};
+
+struct pcmcia_low_level {
+	int (*init)(struct pcmcia_init *);
+	int (*shutdown)(void);
+	int (*socket_state)(unsigned sock, struct pcmcia_state *);
+	int (*get_irq_info)(struct pcmcia_irq_info *);
+	int (*configure_socket)(const struct pcmcia_configure *);
+};
+
+extern struct pcmcia_low_level bcm47xx_pcmcia_ops;
+
+/* I/O pins replacing memory pins
+ * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
+ *
+ * These signals change meaning when going from memory-only to 
+ * memory-or-I/O interface:
+ */
+#define iostschg bvd1
+#define iospkr   bvd2
+
+
+/*
+ * Declaration for implementation specific low_level operations.
+ */
+extern struct pcmcia_low_level bcm4710_pcmcia_ops;
+
+#endif  /* !defined(_BCM4710PCMCIA_H) */
diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
--- linux.old/include/asm-mips/bootinfo.h	2005-11-07 23:12:51.434940250 +0100
+++ linux.dev/include/asm-mips/bootinfo.h	2005-11-07 21:57:07.945592000 +0100
@@ -37,6 +37,7 @@
 #define MACH_GROUP_HP_LJ       20 /* Hewlett Packard LaserJet               */
 #define MACH_GROUP_LASAT       21
 #define MACH_GROUP_TITAN       22 /* PMC-Sierra Titan 			    */
+#define MACH_GROUP_BRCM		   23 /* Broadcom */
 
 /*
  * Valid machtype values for group unknown (low order halfword of mips_machtype)
@@ -197,6 +198,15 @@
 #define MACH_TANBAC_TB0229	7	/* TANBAC TB0229 (VR4131DIMM) */
 
 /*
+ * Valid machtypes for group Broadcom
+ */
+#define MACH_BCM93725          0
+#define MACH_BCM93725_VJ       1
+#define MACH_BCM93730          2
+#define MACH_BCM947XX          3
+#define MACH_BCM933XX          4
+
+/*
  * Valid machtype for group TITAN
  */
 #define	MACH_TITAN_YOSEMITE	1 	/* PMC-Sierra Yosemite */
diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
--- linux.old/include/asm-mips/cpu.h	2005-11-07 23:12:51.434940250 +0100
+++ linux.dev/include/asm-mips/cpu.h	2005-11-07 21:57:07.965593250 +0100
@@ -22,6 +22,11 @@
    spec.
 */
 
+#define PRID_COPT_MASK         0xff000000
+#define PRID_COMP_MASK         0x00ff0000
+#define PRID_IMP_MASK          0x0000ff00
+#define PRID_REV_MASK          0x000000ff
+
 #define PRID_COMP_LEGACY       0x000000
 #define PRID_COMP_MIPS         0x010000
 #define PRID_COMP_BROADCOM     0x020000
@@ -58,6 +63,7 @@
 #define PRID_IMP_RM7000		0x2700
 #define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
 #define PRID_IMP_RM9000		0x3400
+#define PRID_IMP_BCM4710	0x4000
 #define PRID_IMP_R5432		0x5400
 #define PRID_IMP_R5500		0x5500
 #define PRID_IMP_4KC		0x8000
@@ -66,10 +72,16 @@
 #define PRID_IMP_4KEC		0x8400
 #define PRID_IMP_4KSC		0x8600
 #define PRID_IMP_25KF		0x8800
+#define PRID_IMP_BCM3302	0x9000
+#define PRID_IMP_BCM3303	0x9100
 #define PRID_IMP_24K		0x9300
 
 #define PRID_IMP_UNKNOWN	0xff00
 
+#define       BCM330X(id) \
+	(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
+	|| ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
+
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
  */
@@ -174,7 +186,9 @@
 #define CPU_AU1550		57
 #define CPU_24K			58
 #define CPU_AU1200		59
-#define CPU_LAST		59
+#define CPU_BCM4710		60
+#define CPU_BCM3302		61
+#define CPU_LAST		61
 
 /*
  * ISA Level encodings
diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
--- linux.old/include/asm-mips/r4kcache.h	2005-11-07 23:12:51.438940500 +0100
+++ linux.dev/include/asm-mips/r4kcache.h	2005-11-07 21:57:08.161605500 +0100
@@ -658,4 +658,17 @@
 			cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
 }
 
+extern inline void fill_icache_line(unsigned long addr)
+{       
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".set mips3\n\t"
+		"cache %1, (%0)\n\t"
+		".set mips0\n\t"
+		".set reorder"
+		:
+		: "r" (addr),
+		"i" (Fill));
+}      
+
 #endif /* __ASM_R4KCACHE_H */
diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
--- linux.old/include/asm-mips/serial.h	2005-11-07 23:12:51.442940750 +0100
+++ linux.dev/include/asm-mips/serial.h	2005-11-07 21:57:07.993595000 +0100
@@ -223,6 +223,13 @@
 #define TXX927_SERIAL_PORT_DEFNS
 #endif
 
+#ifdef CONFIG_BCM947XX
+/* reserve 4 ports to be configured at runtime */
+#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, },
+#else
+#define BCM947XX_SERIAL_PORT_DEFNS
+#endif
+
 #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
 #define STD_SERIAL_PORT_DEFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
@@ -470,6 +477,7 @@
 #define SERIAL_PORT_DFNS			\
 	ATLAS_SERIAL_PORT_DEFNS			\
 	AU1000_SERIAL_PORT_DEFNS		\
+	BCM947XX_SERIAL_PORT_DEFNS		\
 	COBALT_SERIAL_PORT_DEFNS		\
 	DDB5477_SERIAL_PORT_DEFNS		\
 	EV96100_SERIAL_PORT_DEFNS		\
diff -urN linux.old/init/do_mounts.c linux.dev/init/do_mounts.c
--- linux.old/init/do_mounts.c	2005-11-07 23:12:51.458941750 +0100
+++ linux.dev/init/do_mounts.c	2005-11-07 21:57:07.993595000 +0100
@@ -254,7 +254,13 @@
 	{ "ftlb", 0x2c08 },
 	{ "ftlc", 0x2c10 },
 	{ "ftld", 0x2c18 },
+#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO)
 	{ "mtdblock", 0x1f00 },
+	{ "mtdblock0",0x1f00 },
+	{ "mtdblock1",0x1f01 },
+	{ "mtdblock2",0x1f02 },
+	{ "mtdblock3",0x1f03 },
+#endif
 	{ "nb", 0x2b00 },
 	{ NULL, 0 }
 };