1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
|
From 2473526cf879ead429c6aa1fb7fb77ed3407baaa Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Sun, 9 Dec 2012 17:35:09 +0100
Subject: MIPS: add board support for ZTE ZXV10 H201L
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/board/zte/zxv10h201l/Makefile b/board/zte/zxv10h201l/Makefile
new file mode 100644
index 0000000..3a547c2
--- /dev/null
+++ b/board/zte/zxv10h201l/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/zte/zxv10h201l/config.mk b/board/zte/zxv10h201l/config.mk
new file mode 100644
index 0000000..9d33739
--- /dev/null
+++ b/board/zte/zxv10h201l/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
diff --git a/board/zte/zxv10h201l/ddr_settings.h b/board/zte/zxv10h201l/ddr_settings.h
new file mode 100644
index 0000000..8814957
--- /dev/null
+++ b/board/zte/zxv10h201l/ddr_settings.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * The values have been extracted from original ZTE U-Boot.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
+#define MC_DC01_VALUE 0x0
+#define MC_DC02_VALUE 0x0
+#define MC_DC03_VALUE 0x0
+#define MC_DC04_VALUE 0x0
+#define MC_DC05_VALUE 0x200
+#define MC_DC06_VALUE 0x307
+#define MC_DC07_VALUE 0x303
+#define MC_DC08_VALUE 0x103
+#define MC_DC09_VALUE 0x80B
+#define MC_DC10_VALUE 0x203
+#define MC_DC11_VALUE 0xE02
+#define MC_DC12_VALUE 0x2C8
+#define MC_DC13_VALUE 0x1
+#define MC_DC14_VALUE 0x0
+#define MC_DC15_VALUE 0x100
+#define MC_DC16_VALUE 0xC800
+#define MC_DC17_VALUE 0xF
+#define MC_DC18_VALUE 0x301
+#define MC_DC19_VALUE 0x200
+#define MC_DC20_VALUE 0xA04
+#define MC_DC21_VALUE 0x1600
+#define MC_DC22_VALUE 0x1616
+#define MC_DC23_VALUE 0x0
+#define MC_DC24_VALUE 0x5D
+#define MC_DC25_VALUE 0x0
+#define MC_DC26_VALUE 0x0
+#define MC_DC27_VALUE 0x0
+#define MC_DC28_VALUE 0x5FB
+#define MC_DC29_VALUE 0x35DF
+#define MC_DC30_VALUE 0x99E9
+#define MC_DC31_VALUE 0x0
+#define MC_DC32_VALUE 0x0
+#define MC_DC33_VALUE 0x0
+#define MC_DC34_VALUE 0x0
+#define MC_DC35_VALUE 0x0
+#define MC_DC36_VALUE 0x0
+#define MC_DC37_VALUE 0x0
+#define MC_DC38_VALUE 0x0
+#define MC_DC39_VALUE 0x0
+#define MC_DC40_VALUE 0x0
+#define MC_DC41_VALUE 0x0
+#define MC_DC42_VALUE 0x0
+#define MC_DC43_VALUE 0x0
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x600
+#define MC_DC46_VALUE 0x0
diff --git a/board/zte/zxv10h201l/zxv10h201l.c b/board/zte/zxv10h201l/zxv10h201l.c
new file mode 100644
index 0000000..8218a9d
--- /dev/null
+++ b/board/zte/zxv10h201l/zxv10h201l.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <switch.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/chipid.h>
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: " CONFIG_BOARD_NAME "\n");
+ ltq_chip_print_info();
+
+ return 0;
+}
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+ /* MAC0: REALTEK RTL8306 switch */
+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
+};
+
+static const struct ltq_eth_board_config eth_board_config = {
+ .ports = eth_port_config,
+ .num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+int board_eth_init(bd_t *bis)
+{
+ return ltq_eth_initialize(ð_board_config);
+}
+
+static struct switch_device rtl8306_dev = {
+ .name = "rtl8306",
+ .cpu_port = 5,
+ .port_mask = 0xF,
+};
+
+int board_switch_init(void)
+{
+ return switch_device_register(&rtl8306_dev);
+}
diff --git a/boards.cfg b/boards.cfg
index 4b18a26..4362856 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -496,6 +496,9 @@ Active mips mips32 - micronas vct
Active mips mips32 - micronas vct vct_premium_onenand vct:VCT_PREMIUM,VCT_ONENAND -
Active mips mips32 - micronas vct vct_premium_onenand_small vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE -
Active mips mips32 - micronas vct vct_premium_small vct:VCT_PREMIUM,VCT_SMALL_IMAGE -
+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange <thomas@corelatus.se>
diff --git a/include/configs/zxv10h201l.h b/include/configs/zxv10h201l.h
new file mode 100644
index 0000000..bfe116d
--- /dev/null
+++ b/include/configs/zxv10h201l.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE "ZXV10 H201L"
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME "ZTE ZXV10 H201L"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
+
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
+
+/* Switch devices */
+#define CONFIG_SWITCH_MULTI
+#define CONFIG_SWITCH_RTL8306
+
+/* Environment */
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (256 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#elif defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (128 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+#if defined(CONFIG_SYS_BOOT_ZTE)
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
+#if defined(CONFIG_SYS_BOOT_ZTE)
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Pull in default OpenWrt configs for Lantiq SoC */
+#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_UPDATE_UBOOT_NOR
+
+#endif /* __CONFIG_H */
--
1.8.3.2
|
