1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
From 3b86cd428cc1338667585d6b6bffdabc6a601c5e Mon Sep 17 00:00:00 2001
From: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri, 26 Aug 2016 16:09:00 -0400
Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_power_off()
This makes the driver match the poweroff sequence of the vendor driver
and allows the firmware to reload correctly upon rmmod/insmod.
However the device still doesn't receive data upon reloading.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 136 ++++++++++++++++++++-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 +
2 files changed, 137 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
@@ -1191,6 +1191,71 @@ exit:
return ret;
}
+static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+ u8 val8;
+
+ /* 0x04[12:11] = 01 enable WL suspend */
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+ val8 &= ~BIT(0);
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
+
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+ val8 |= BIT(7);
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+ return 0;
+}
+
+static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+ struct device *dev = &priv->udev->dev;
+ u8 val8;
+ u16 val16;
+ u32 val32;
+ int retry, retval;
+
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
+
+ retry = 100;
+ retval = -EBUSY;
+ /*
+ * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
+ */
+ do {
+ val32 = rtl8xxxu_read32(priv, 0x05f8);
+ if (!val32) {
+ retval = 0;
+ break;
+ }
+ } while (retry--);
+
+ if (!retry) {
+ dev_warn(dev, "Failed to flush TX queue\n");
+ retval = -EBUSY;
+ goto out;
+ }
+
+ /* Disable CCK and OFDM, clock gated */
+ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+ val8 &= ~SYS_FUNC_BBRSTB;
+ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+ udelay(2);
+
+ /* Reset MAC TRX */
+ val16 = rtl8xxxu_read16(priv, REG_CR);
+ val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+ rtl8xxxu_write16(priv, REG_CR, val16);
+
+ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+ val8 |= DUAL_TSF_TX_OK;
+ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+ return retval;
+}
+
static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
{
u16 val16;
@@ -1221,6 +1286,75 @@ exit:
return ret;
}
+void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
+{
+ u8 val8;
+ u16 val16;
+
+ rtl8xxxu_flush_fifo(priv);
+
+ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+ val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+ /* Turn off RF */
+ rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+ rtl8188eu_active_to_lps(priv);
+
+ /* Reset Firmware if running in RAM */
+ if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+ rtl8xxxu_firmware_self_reset(priv);
+
+ /* Reset MCU */
+ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+ val16 &= ~SYS_FUNC_CPU_ENABLE;
+ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+ /* Reset MCU ready status */
+ rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+ /* 32K_CTRL looks to be very 8188e specific */
+ val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
+ val8 &= ~BIT(0);
+ rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
+
+ rtl8188eu_active_to_emu(priv);
+ rtl8188eu_emu_to_disabled(priv);
+
+ /* Reset MCU IO Wrapper */
+ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+ val8 &= ~BIT(3);
+ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+ val8 |= BIT(3);
+ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+ /* Vendor driver refers to GPIO_IN */
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
+ /* Vendor driver refers to GPIO_OUT */
+ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
+ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
+
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
+ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
+ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
+
+ /*
+ * Set LNA, TRSW, EX_PA Pin to output mode
+ * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
+ */
+ rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
+
+ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
+
+ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+ val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
+ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+}
+
static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
{
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
@@ -1265,7 +1399,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
.parse_efuse = rtl8188eu_parse_efuse,
.load_firmware = rtl8188eu_load_firmware,
.power_on = rtl8188eu_power_on,
- .power_off = rtl8xxxu_power_off,
+ .power_off = rtl8188eu_power_off,
.reset_8051 = rtl8188eu_reset_8051,
.llt_init = rtl8xxxu_init_llt_table,
.init_phy_bb = rtl8188eu_init_phy_bb,
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -418,6 +418,8 @@
#define REG_MBIST_START 0x0174
#define REG_MBIST_DONE 0x0178
#define REG_MBIST_FAIL 0x017c
+/* 8188EU */
+#define REG_32K_CTRL 0x0194
#define REG_C2HEVT_MSG_NORMAL 0x01a0
/* 8192EU/8723BU/8812 */
#define REG_C2HEVT_CMD_ID_8723B 0x01ae
|
