path: root/target/linux/ar7-2.4/patches/003-net_driver_cpmac.patch

diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c
--- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.c	2005-07-12 02:48:41.996601000 +0200
@@ -0,0 +1,728 @@
+#ifndef _INC_CPCOMMON_C
+#define _INC_CPCOMMON_C
+
+#ifdef _CPHAL_CPMAC
+#include "cpremap_cpmac.c"
+#endif
+
+#ifdef _CPHAL_AAL5
+#include "cpremap_cpaal5.c"
+#endif
+
+#ifdef _CPHAL_CPSAR
+#include "cpremap_cpsar.c"
+#endif
+
+#ifdef _CPHAL_AAL2
+#include "cpremap_cpaal2.c"
+#endif
+
+/**
+@defgroup Common_Config_Params Common Configuration Parameters
+
+This section documents the configuration parameters that are valid across
+all CPHAL devices.
+@{
+*/
+/** This is the debug level.  The field is bit defined, such that the user
+should set to 1 all the bits corresponding to desired debug outputs.  The following 
+are the meanings for each debug bit:
+- bit0 (LSB): CPHAL Function Trace
+- b1 : OS Function call trace
+- b2 : Critical section entry/exit
+- b3 : Memory allocation/destruction
+- b4 : Detailed information in Rx path
+- b5 : Detailed information in Tx path
+- b6 : Extended error information
+- b7 : General info
+*/
+static const char pszDebug[]        = "debug";
+/** CPU Frequency. */
+/*static const char pszCpuFreq[]      = "CpuFreq";*/               /*MJH-030403*/
+/** Base address for the module. */
+static const char pszBase[]         = "base";
+/** Reset bit for the module. */
+static const char pszResetBit[]     = "reset_bit";
+/** Reset base address for the module. */
+static const char pszResetBase[]    = "ResetBase";
+/** Interrupt line for the module. */
+static const char pszIntLine[]      = "int_line";
+/** VLYNQ offset for the module.  Disregard if not using VLYNQ. */
+static const char pszOffset[]       = "offset";
+/** The OS may "Get" this parameter, which is a pointer
+    to a character string that indicates the version of CPHAL. */
+static const char pszVer[]          = "Version";
+/*@}*/
+
+/**
+@defgroup Common_Control_Params Common Keys for [os]Control()
+
+This section documents the keys used with the OS @c Control() interface that
+are required by CPHAL devices.
+
+@{
+*/
+/** Used to wait for an integer number of clock ticks, given as an integer
+    pointer in the @p Value parameter.  No actions are defined. */
+static const char pszSleep[]             = "Sleep";
+/** Requests the OS to flush it's IO buffers.  No actions are defined. */
+static const char pszSioFlush[]          = "SioFlush";
+/*@}*/
+
+static const char pszStateChange[]       = "StateChange";
+static const char pszStatus[]            = "Status";
+
+static const char pszGET[]               = "Get";
+static const char pszSET[]               = "Set";
+static const char pszCLEAR[]             = "Clear";
+static const char pszNULL[]              = "";
+static const char pszLocator[]           = "Locator";
+static const char pszOff[]               = "Off";
+static const char pszOn[]                = "On";
+static const char hcMaxFrags[]           = "MaxFrags";
+
+#ifdef _CPHAL_CPMAC
+
+/*  New method for string constants */
+const char hcClear[]  = "Clear";
+const char hcGet[]    = "Get";
+const char hcSet[]    = "Set";
+
+const char hcTick[]   = "Tick";
+
+static const CONTROL_KEY KeyCommon[] =
+   {
+     {""                   , enCommonStart},
+     {pszStatus            , enStatus},
+     {pszOff               , enOff},
+     {pszOn                , enOn},
+     {pszDebug             , enDebug},
+     {hcCpuFrequency       , enCpuFreq},                           /*MJH~030403*/
+     {""                   , enCommonEnd}
+   };
+#endif
+
+/**
+@defgroup Common_Statistics Statistics
+
+A broad array of module statistics is available.  Statistics values are accessed
+through the @c Control() interface of the CPHAL.  There are 5 different levels
+of statistics, each of which correspond to a unique set of data.  Furthermore,
+certain statistics data is indexed by using a channel number and Tx queue number.
+The following is a brief description of each statistics level, along with the
+indexes used for the level:
+
+- Level 0:  Hardware Statistics (index with channel)
+- Level 1:  CPHAL Software Statistics (channel, queue)
+- Level 2:  CPHAL Flags (channel, queue)
+- Level 3:  CPHAL Channel Configuration (channel)
+- Level 4:  CPHAL General Configuration (no index)
+
+The caller requests statistics information by providing a Key string to the
+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
+The only valid Action parameter for statistics usage is "Get".
+
+Code Examples:
+@code
+unsigned int *StatsData;
+
+# Get Level 0 stats for Channel 1
+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
+
+# Get Level 2 stats for Channel 0, Queue 0
+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
+
+# Get Level 4 stats
+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
+@endcode
+
+The information returned in the Value parameter of @c Control() is an
+array of pointers to strings.  The pointers are arranged in pairs.
+The first pointer is a pointer to a name string for a particular statistic.
+The next pointer is a pointer to a string containing the representation of
+the integer statistic value corresponding to the first pointer.  This is followed
+by another pair of pointers, and so on, until a NULL pointer is encountered.  The
+following is example code for processing the statistics data.  Note that the OS
+is responsible for freeing the memory passed back through the Value parameter of
+@c Control().
+
+@code
+unsigned int *StatsData;
+
+# Get Level 0 stats for Channel 1
+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
+
+# output Statistics data
+PrintStats(StatsData);
+
+# the upper layer is responsible for freeing stats info
+free(&StatsPtr);
+
+...
+
+void PrintStats(unsigned int *StatsPtr)
+  {
+   while(*StatsPtr)
+     {
+      printf("%20s:",  (char *)*StatsPtr);
+      StatsPtr++;
+      printf("%11s\n", (char *)*StatsPtr);
+      StatsPtr++;
+     }
+   MySioFlush();
+  }
+@endcode
+
+Within each statistics level, there are several statistics defined.  The statistics that
+are common to every CPPI module are listed below.  In addition, each module may define
+extra statistics in each level, which will be documented within the module-specific
+documentation appendices.
+
+- Level 0 Statistics
+  - All level 0 statistics are module-specific.
+- Level 1 Statistics (CPHAL Software Statistics)
+  - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
+  - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
+transmitting the previous last packet in the queue (per channel and queue).
+  - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
+reception of the previous last packet in the queue (per channel).
+  - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
+  - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
+  - RxPacketsServiced: Number of received packets (per channel).
+  - TxPacketsServiced: Number of transmitted packets (per channel and queue).
+  - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
+  - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
+  - RxTotal: Total number of received packets, all channels.
+  - TxTotal: Total number of transmitted packets, all channels and queues.
+- Level 2 Statistics (CPHAL Flags)
+  - RcbPool: Pointer to receive descriptor pool (per channel).
+  - RxActQueueCount: Number of buffers currently available for receive (per channel).
+  - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
+  - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
+  - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
+  - RcbStart: Pointer to block of receive descriptors.
+  - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
+  - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
+  - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
+  - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
+  - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
+  - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
+  - TcbStart: Pointer to block of transmit descriptors.
+  - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
+- Level 3 Statistics (CPHAL Channel Configuration)
+  - RxBufSize: Rx buffer size.
+  - RxBufferOffset: Rx buffer offset.
+  - RxNumBuffers: Number of Rx buffers.
+  - RxServiceMax: Maximum number of receive packets to service at a time.
+  - TxNumBuffers: Number of Tx buffer descriptors.
+  - TxNumQueues: Number of Tx queues to use.
+  - TxServiceMax: Maximum number of transmit packets to service at a time.
+- Level 4 Statistics (CPHAL General Configuration)
+  - Base Address: Base address of the module.
+  - Offset (VLYNQ): VLYNQ relative module offset.
+  - Interrupt Line: Interrupt number.
+  - Debug: Debug flag, 1 to enable debug.
+  - Inst: Instance number.
+*/
+
+/* 
+   Data Type 0 = int display
+   Data Type 1 = hex display
+   Data Type 2 = channel structure, int display
+   Data Type 3 = queue index and int display
+   Data Type 4 = queue index and hex display
+*/
+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
+static STATS_TABLE StatsTable0[] =
+  {
+#ifdef _CPHAL_AAL5
+   /* Name ,        Data Ptr,   Data Type */
+   {"Crc Errors",          0,          0},
+   {"Len Errors",          0,          0},
+   {"Abort Errors",        0,          0},
+   {"Starv Errors",        0,          0}
+#endif
+#ifdef _CPHAL_CPMAC
+   {"Rx Good Frames",      0,          0}
+#endif
+  };
+
+static STATS_TABLE StatsTable1[] =
+  {
+   /* Name ,        Data Ptr,   Data Type */
+   {"DmaLenErrors",        0,          0},
+   {"TxMisQCnt",           0,          3},
+   {"RxMisQCnt",           0,          0},
+   {"TxEOQCnt",            0,          3},
+   {"RxEOQCnt",            0,          0},
+   {"RxPacketsServiced",   0,          0},
+   {"TxPacketsServiced",   0,          3},
+   {"RxMaxServiced",       0,          0},
+   {"TxMaxServiced",       0,          3},
+   {"RxTotal",             0,          0},
+   {"TxTotal",             0,          0},
+  };
+
+static STATS_TABLE StatsTable2[] =
+  {
+   /* Name ,        Data Ptr,   Data Type */
+   {"RcbPool",             0,          1},
+   {"RxActQueueCount",     0,          0},
+   {"RxActQueueHead",      0,          1},
+   {"RxActQueueTail",      0,          1},
+   {"RxActive",            0,          0},
+   {"RcbStart",            0,          1},
+   {"RxTeardownPending",   0,          0},
+   {"TcbPool",             0,          4},
+   {"TxActQueueCount",     0,          3},
+   {"TxActQueueHead",      0,          4},
+   {"TxActQueueTail",      0,          4},
+   {"TxActive",            0,          3},
+   {"TcbStart",            0,          4},
+   {"TxTeardownPending",   0,          0}
+  };
+
+static STATS_TABLE StatsTable3[] =
+  {
+   /* Name ,        Data Ptr,   Data Type */
+   {"RxBufSize",           0,          2},
+   {"RxBufferOffset",      0,          2},
+   {"RxNumBuffers",        0,          2},
+   {"RxServiceMax",        0,          2},
+   {"TxNumBuffers",        0,          2},
+   {"TxNumQueues",         0,          2},
+   {"TxServiceMax",        0,          2},
+#ifdef _CPHAL_AAL5
+   {"CpcsUU",              0,          2},
+   {"Gfc",                 0,          2},
+   {"Clp",                 0,          2},
+   {"Pti",                 0,          2},
+   {"DaMask",              0,          2},
+   {"Priority",            0,          2},
+   {"PktType",             0,          2},
+   {"Vci",                 0,          2},
+   {"Vpi",                 0,          2},
+   {"CellRate",            0,          2},
+   {"QosType",             0,          2},
+   {"Mbs",                 0,          2},
+   {"Pcr",                 0,          2}
+#endif
+  };
+
+static STATS_TABLE StatsTable4[] =
+  {
+   {"Base Address",        0,          1},
+   {"Offset (VLYNQ)",      0,          0},
+   {"Interrupt Line",      0,          0},
+   {"Debug",               0,          0},
+   {"Instance",            0,          0},
+#ifdef _CPHAL_AAL5
+   {"UniNni",              0,          0}
+#endif
+  };
+
+static STATS_DB StatsDb[] =
+  {
+    {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
+    {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
+    {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
+    {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
+    {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
+  };
+#endif /* +GSG 030307 */
+
+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
+static void resetWait(HAL_DEVICE *HalDev)
+  {                                                                  /*+RC3.02*/
+  const int TickReset=64;
+  osfuncSleep((int*)&TickReset);
+  }                                                                  /*+RC3.02*/
+#endif /* +RC 3.02 */
+
+/* I only define the reset base function for the modules
+   that can perform a reset.  The AAL5 and AAL2 modules
+   do not perform a reset, that is done by the shared module
+   CPSAR */
+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
+/*
+ *  Determines the reset register address to be used for a particular device.
+ *  It will search the current device entry for Locator information.  If the
+ *  device is a root device, there will be no Locator information, and the
+ *  function will find and return the root reset register.  If a Locator value
+ *  is found, the function will search each VLYNQ device entry in the system
+ *  looking for a matching Locator.  Once it finds a VLYNQ device entry with
+ *  a matching Locator, it will extract the "ResetBase" parameter from that
+ *  VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
+ *
+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
+ *  @param  ResetBase Pointer to integer address of reset register.
+ *
+ *  @return 0 OK, Non-zero not OK
+ */
+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
+  {
+   char *DeviceInfo = HalDev->DeviceInfo;
+   char *MyLocator, *NextLocator;
+   int Inst=1;
+   bit32u error_code;
+
+#ifdef __CPHAL_DEBUG
+   if (DBG(0))
+     {
+      dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
+      osfuncSioFlush();
+     }
+#endif
+
+   error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
+   if (error_code)
+     {
+      /* if no Locator value, device is on the root, so get the "reset" device */
+      error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
+      if  (error_code)
+        {
+         return(EC_VAL_DEVICE_NOT_FOUND);
+        }
+
+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
+      if (error_code)
+        {
+         return(EC_VAL_BASE_ADDR_NOT_FOUND);
+        }
+
+      *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
+
+      /* found base address for root device, so we're done */
+      return (EC_NO_ERRORS);
+     }
+    else
+     {
+      /* we have a Locator value, so the device is remote */
+
+      /* Find a vlynq device with a matching locator value */
+      while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
+        {
+         error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
+         if (error_code)
+           {
+            /* no Locator value for this VLYNQ, so move on */
+            continue;
+           }
+         if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
+           {
+            /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
+            error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
+            if (error_code)
+              {
+               return(EC_VAL_BASE_ADDR_NOT_FOUND);
+              }
+            *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
+
+            /* found base address for root device, so we're done */
+            return (EC_NO_ERRORS);
+           }
+         Inst++;
+        } /* while */
+     } /* else */
+
+   return (EC_NO_ERRORS);
+  }
+#endif
+
+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
+  {
+   bit32u ParmValue;
+   bit32 error_code;
+   char *DeviceInfo = HalDev->DeviceInfo;
+
+#ifdef __CPHAL_DEBUG
+   if (DBG(0))
+     {
+      dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
+      osfuncSioFlush();
+     }
+#endif
+
+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
+   if (error_code)
+     {
+      return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
+     }
+   HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
+
+#ifndef _CPHAL_AAL5
+#ifndef _CPHAL_AAL2
+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
+   if(error_code)
+     {
+      return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
+     }
+   HalDev->ResetBit = ParmValue;
+
+   /* Get reset base address */
+   error_code = ResetBaseGet(HalDev, &ParmValue);
+   if (error_code)
+     return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
+   HalDev->ResetBase = ParmValue;
+#endif
+#endif
+
+#ifndef _CPHAL_CPSAR
+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
+   if (error_code)
+     {
+      return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
+     }
+   HalDev->interrupt = ParmValue;
+#endif
+
+   /* only look for the offset if there is a Locator field, which indicates that
+      the module is a VLYNQ module */
+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
+   if (!error_code)
+     {
+      error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
+      if (error_code)
+        {
+         return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
+        }
+      HalDev->offset = ParmValue;
+     }
+    else
+      HalDev->offset = 0;
+
+   error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
+   if (!error_code) HalDev->debug = ParmValue;
+
+   return (EC_NO_ERRORS);
+  }
+#endif /* +RC 3.02 */
+
+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
+static void StatsInit(HAL_DEVICE *HalDev)                             /* +() RC3.02 */
+  {
+   /* even though these statistics may be for multiple channels and
+      queues, i need only configure the pointer to the beginning
+      of the array, and I can index from there if necessary */
+
+#ifdef _CPHAL_AAL5
+   StatsTable0[0].StatPtr  = &HalDev->Stats.CrcErrors[0];
+   StatsTable0[1].StatPtr  = &HalDev->Stats.LenErrors[0];
+   StatsTable0[2].StatPtr  = &HalDev->Stats.AbortErrors[0];
+   StatsTable0[3].StatPtr  = &HalDev->Stats.StarvErrors[0];
+
+   StatsTable1[0].StatPtr  = &HalDev->Stats.DmaLenErrors[0];
+   StatsTable1[1].StatPtr  = &HalDev->Stats.TxMisQCnt[0][0];
+   StatsTable1[2].StatPtr  = &HalDev->Stats.RxMisQCnt[0];
+   StatsTable1[3].StatPtr  = &HalDev->Stats.TxEOQCnt[0][0];
+   StatsTable1[4].StatPtr  = &HalDev->Stats.RxEOQCnt[0];
+   StatsTable1[5].StatPtr  = &HalDev->Stats.RxPacketsServiced[0];
+   StatsTable1[6].StatPtr  = &HalDev->Stats.TxPacketsServiced[0][0];
+   StatsTable1[7].StatPtr  = &HalDev->Stats.RxMaxServiced;
+   StatsTable1[8].StatPtr  = &HalDev->Stats.TxMaxServiced[0][0];
+   StatsTable1[9].StatPtr  = &HalDev->Stats.RxTotal;
+   StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
+#endif
+
+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
+   StatsTable2[0].StatPtr  = (bit32u *)&HalDev->RcbPool[0];
+   StatsTable2[1].StatPtr  = &HalDev->RxActQueueCount[0];
+   StatsTable2[2].StatPtr  = (bit32u *)&HalDev->RxActQueueHead[0];
+   StatsTable2[3].StatPtr  = (bit32u *)&HalDev->RxActQueueTail[0];
+   StatsTable2[4].StatPtr  = &HalDev->RxActive[0];
+   StatsTable2[5].StatPtr  = (bit32u *)&HalDev->RcbStart[0];
+   StatsTable2[6].StatPtr  = &HalDev->RxTeardownPending[0];
+   StatsTable2[7].StatPtr  = (bit32u *)&HalDev->TcbPool[0][0];
+   StatsTable2[8].StatPtr  = &HalDev->TxActQueueCount[0][0];
+   StatsTable2[9].StatPtr  = (bit32u *)&HalDev->TxActQueueHead[0][0];
+   StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
+   StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
+   StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
+   StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
+
+   StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
+   StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
+   StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
+   StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
+   StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
+   StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
+   StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
+#ifdef _CPHAL_AAL5
+   StatsTable3[7].StatPtr  = &HalDev->ChData[0].CpcsUU;
+   StatsTable3[8].StatPtr  = &HalDev->ChData[0].Gfc;
+   StatsTable3[9].StatPtr  = &HalDev->ChData[0].Clp;
+   StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
+   StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
+   StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
+   StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
+   StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
+   StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
+   StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
+   StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
+   StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
+   StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
+#endif
+#endif
+
+   StatsTable4[0].StatPtr  = &HalDev->dev_base;
+   StatsTable4[1].StatPtr  = &HalDev->offset;
+   StatsTable4[2].StatPtr  = &HalDev->interrupt;
+   StatsTable4[3].StatPtr  = &HalDev->debug;
+   StatsTable4[4].StatPtr  = &HalDev->Inst;
+  }
+#endif /* +RC 3.02 */
+
+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
+/*
+ *  Returns statistics information.
+ *
+ *  @param  HalDev   CPHAL module instance. (set by xxxInitModule())
+ *
+ *  @return 0
+ */
+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
+  {
+   int Size;
+   bit32u *AddrPtr;
+   char *DataPtr;
+   STATS_TABLE *StatsTable;
+   int i, NumberOfStats;
+
+#ifdef __CPHAL_DEBUG
+   if (DBG(0))
+     {
+      dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
+                (bit32u)HalDev, (bit32u)StatPtr);
+      osfuncSioFlush();
+     }
+#endif
+
+   StatsTable = StatsDb[Index].StatTable;
+   NumberOfStats = StatsDb[Index].NumberOfStats;
+
+   Size = sizeof(bit32u)*((NumberOfStats*2)+1);
+   Size += (NumberOfStats*11);
+   *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
+
+   AddrPtr = (bit32u *) *StatPtr;
+   DataPtr = (char *)AddrPtr;
+   DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
+
+   for (i=0; i<NumberOfStats; i++)
+     {
+      *AddrPtr++ = (bit32u)StatsTable[i].StatName;
+      *AddrPtr++ = (bit32u)DataPtr;
+      if (&StatsTable[i].StatPtr[Ch] != 0)
+        {
+         switch(StatsTable[i].DataType)
+           {
+            case 0:
+              HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
+              break;
+            case 1:
+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
+              break;
+            case 2:
+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
+              break;
+            case 3:
+              HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
+              break;
+            case 4:
+              HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
+              break;
+            default:
+              /* invalid data type, due to CPHAL programming error */
+              break;
+           }
+        }
+       else
+        {
+         /* invalid statistics pointer, probably was not initialized */
+        }
+      DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
+     }
+
+   *AddrPtr = (bit32u) 0;
+
+   return (EC_NO_ERRORS);
+  }
+#endif /* +RC 3.02 */
+#endif /* +RC 3.02 */
+
+#ifdef _CPHAL_CPMAC
+static void gpioFunctional(int base, int bit)
+  {                                                                  /*+RC3.02*/
+  bit32u GpioEnr = base + 0xC;
+  /*  To make functional, set to zero  */
+  *(volatile bit32u *)(GpioEnr) &= ~(1 << bit);                      /*+RC3.02*/
+  }                                                                  /*+RC3.02*/
+
+
+/*+RC3.02*/
+/* Common function, Checks to see if GPIO should be in functional mode */
+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
+  {                                                                  /*+RC3.02*/
+  int rc;
+  void *DeviceInfo;
+  char *pszMuxBits;
+  char pszMuxBit[20];
+  char *pszTmp;
+  char szMuxBit[20];
+  char *ptr;
+  int base;
+  int reset_bit;
+  int bit;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+
+  rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
+  if(rc) return;
+  /*  gpio entry found, get GPIO register info and make functional  */
+
+  /* temp copy until FinParmValue fixed */
+  ptr = &szMuxBit[0];
+  while ((*ptr++ = *pszTmp++));
+
+  pszMuxBits = &szMuxBit[0];
+
+  rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
+  if(rc) return;
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
+  if(rc) return;
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
+  if(rc) return;
+
+  /* If GPIO still in reset, then exit  */
+  if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
+    return;
+  /*  format for gpio_mux is  gpio_mux = <int>;<int>;<int>...*/
+  while (*pszMuxBits)
+    {
+    pszTmp = &pszMuxBit[0];
+    if(*pszMuxBits == ';') pszMuxBits++;
+    while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
+      {
+      osfuncSioFlush();
+      /*If value not a number, skip */
+      if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
+        pszMuxBits++;
+      else
+        *pszTmp++ = *pszMuxBits++;
+      }
+    *pszTmp = '\0';
+    bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
+    gpioFunctional(base, bit);
+    resetWait(HalDev);  /* not sure if this is needed */
+    }
+  }                                                                  /*+RC3.02*/
+#endif  /* CPMAC  */
+
+#ifdef _CPHAL_AAL5
+const char hcSarFrequency[] = "SarFreq";
+#endif
+
+#endif  /* _INC  */
diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h
--- linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpcommon_cpmac.h	2005-07-12 02:48:41.996601000 +0200
@@ -0,0 +1,79 @@
+#ifndef _INC_CPCOMMON_H
+#define _INC_CPCOMMON_H
+
+#define VOLATILE32(addr)  (*(volatile bit32u *)(addr))
+#ifndef dbgPrintf
+#define dbgPrintf HalDev->OsFunc->Printf
+#endif
+
+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
+
+#define DBG(level)  (HalDev->debug & (1<<(level)))
+/*
+#define DBG0()      DBG(0)
+#define DBG1()      DBG(1)
+#define DBG2()      DBG(2)
+#define DBG3()      DBG(3)
+#define DBG4()      DBG(4)
+#define DBG5()      DBG(5)
+#define DBG6()      DBG(6)
+#define DBG7()      DBG(7)
+*/
+
+/*
+ *  List of defined actions for use with Control().
+ */
+typedef enum 
+  {
+   enGET=0,     /**< Get the value associated with a key */
+   enSET,       /**< Set the value associates with a key */
+   enCLEAR,     /**<Clear the value */ 
+   enNULL       /**< No data action, used to initiate a service or send a message */
+  }ACTION;
+
+/*
+ *  Enumerated hardware states.
+ */
+typedef enum
+  {
+   enConnected=1, enDevFound, enInitialized, enOpened
+  }DEVICE_STATE;
+
+typedef enum 
+  {
+   enCommonStart=0,
+   /* General  */
+   enOff, enOn, enDebug, 
+   /* Module General */
+   enCpuFreq, 
+   enStatus,
+   enCommonEnd
+   }COMMON_KEY;
+
+typedef struct
+  {
+   const char  *strKey;
+   int  enKey;
+  }CONTROL_KEY;
+
+typedef struct
+  {
+   char *StatName;
+   unsigned int *StatPtr;
+   int DataType; /* 0: int, 1: hex int, 2:channel data */
+  }STATS_TABLE;
+
+typedef struct
+  {
+   int NumberOfStats;
+   STATS_TABLE *StatTable;
+  }STATS_DB;
+
+#define osfuncSioFlush()    HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
+#define osfuncSleep(Ticks)  HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
+
+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
+
+#endif
+
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpmac.c
--- linux.old/drivers/net/avalanche_cpmac/cpmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-07-22 01:03:12.609318544 +0200
@@ -0,0 +1,2504 @@
+/******************************************************************************
+ * FILE PURPOSE:    CPMAC Linux Network Device Driver Source
+ ******************************************************************************
+ * FILE NAME:       cpmac.c
+ *
+ * DESCRIPTION:     CPMAC Network Device Driver Source
+ *
+ * REVISION HISTORY:
+ *
+ * Date           Description                               Author
+ *-----------------------------------------------------------------------------
+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
+ * 30 Sep 2003    Updates for LED, Reset stats              Suraj S Iyer
+ * 
+ * (C) Copyright 2003, Texas Instruments, Inc
+ *******************************************************************************/
+#include <linux/kernel.h> 
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>     
+#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include <linux/skbuff.h>
+
+#include <asm/mips-boards/prom.h>
+#include <linux/string.h>
+#include <asm/uaccess.h>
+#include <linux/config.h>
+#include <asm/ar7/if_port.h>
+
+extern void build_psp_config(void);
+extern void psp_config_cleanup(void);
+
+#include "cpmacHalLx.h"
+#include "cpmac.h"
+
+static struct net_device *last_cpmac_device = NULL;
+static int    cpmac_devices_installed = 0;
+
+void xdump( u_char*  cp, int  length, char*  prefix );
+
+unsigned int  cpmac_cpu_freq = 0;
+
+char cpmac_version[] = "1.5";
+
+char l3_align_array[]            = {0x02, 0x01, 0x00, 0x03};
+#define L3_ALIGN(i)                l3_align_array[i]
+
+char add_for_4byte_align[]       = {0x04, 0x03, 0x02, 0x05};
+#define ADD_FOR_4BYTE_ALIGN(i)     add_for_4byte_align[i]
+
+
+#define TPID                       0x8100
+#define IS_802_1Q_FRAME(byte_ptr)  (*(unsigned short*)byte_ptr == TPID)
+#define TPID_START_OFFSET          12
+#define TCI_START_OFFSET           14
+#define TCI_LENGTH                 2
+#define TPID_LENGTH                2
+#define TPID_END_OFFSET            (TPID_START_OFFSET + TPID_LENGTH)
+#define TCI_END_OFFSET             (TCI_START_OFFSET  + TCI_LENGTH)
+#define IS_VALID_VLAN_ID(byte_ptr) ((*(unsigned short*)byte_ptr) && 0xfff != 0)
+#define MAX_CLASSES                8
+#define MAX_USER_PRIORITY          8
+#define CONTROL_802_1Q_SIZE        (TCI_LENGTH + TPID_LENGTH)
+
+unsigned char user_priority_to_traffic_class_map[MAX_CLASSES][MAX_USER_PRIORITY] = 
+{ 
+  {0, 0, 0, 1, 1, 1, 1, 2}, 
+  {0, 0, 0, 0, 0, 0, 0, 0}, 
+  {0, 0, 0, 0, 0, 0, 0, 1}, 
+  {0, 0, 0, 1, 1, 2, 2, 3}, 
+  {0, 1, 1, 2, 2, 3, 3, 4}, 
+  {0, 1, 1, 2, 3, 4, 4, 5}, 
+  {0, 1, 2, 3, 4, 5, 5, 6}, 
+  {0, 1, 2, 3, 4, 5, 6, 7}
+};
+
+#define GET_802_1P_CHAN(x,y) user_priority_to_traffic_class_map[x][(y & 0xe0)]
+
+#if defined(CONFIG_MIPS_SEAD2)
+unsigned long temp_base_address[2] = {0xa8610000, 0xa8612800};
+unsigned long temp_reset_value[2] = { 1<< 17,1<<21};
+#define RESET_REG_PRCR   (*(volatile unsigned int *)((0xa8611600 + 0x0)))
+#define VERSION(base)   (*(volatile unsigned int *)(((base)|0xa0000000) + 0x0))
+#endif
+
+MODULE_AUTHOR("Maintainer: Suraj S Iyer <ssiyer@ti.com>");
+MODULE_DESCRIPTION("Driver for TI CPMAC");
+
+static int cfg_link_speed = 0;
+MODULE_PARM(cfg_link_speed, "i");
+MODULE_PARM_DESC(cfg_link_speed, "Fixed speed of the Link: <100/10>");
+
+static char *cfg_link_mode = NULL;
+MODULE_PARM(cfg_link_mode, "1-3s");
+MODULE_PARM_DESC(cfg_link_mode, "Fixed mode of the Link: <fd/hd>");
+
+int cpmac_debug_mode = 0;
+MODULE_PARM(debug_mode, "i");
+MODULE_PARM_DESC(debug_mode, "Turn on the debug info: <0/1>. Default is 0 (off)");
+
+#define dbgPrint if (cpmac_debug_mode) printk
+#define errPrint printk
+
+static int g_cfg_start_link_params = CFG_START_LINK_SPEED;
+static int g_init_enable_flag      = 0;
+static int cfg_start_link_speed;
+static int cpmac_max_frame_size;
+
+static struct net_device *g_dev_array[2];
+static struct proc_dir_entry *gp_stats_file = NULL;
+
+//-----------------------------------------------------------------------------
+// Statistics related private functions.
+//----------------------------------------------------------------------------- 
+static int  cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *len);
+static int  cpmac_p_read_rfc2665_stats(char *buf, char **start, off_t offset, int count, int *eof, void *data);
+static int  cpmac_p_read_link(char *buf, char **start, off_t offset, int count, int *eof, void *data);
+static int  cpmac_p_read_stats(char* buf, char **start, off_t offset, int count, int *eof, void *data);
+static int  cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data);
+static int  cpmac_p_reset_statistics (struct net_device *p_dev);
+static int  cpmac_p_get_version(char *buf, char **start, off_t offset, int count, int *eof, void *data);
+
+static int  cpmac_p_detect_manual_cfg(int, char*, int);
+static int  cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
+
+//-----------------------------------------------------------------------------
+// Timer related private functions.
+//-----------------------------------------------------------------------------
+static int  cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
+// static int  cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
+static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param);
+inline static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks);
+static int  cpmac_p_stop_timer(struct timer_list *p_timer);
+
+//------------------------------------------------------------------------------
+// Device configuration and setup related private functions.
+//------------------------------------------------------------------------------
+static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, unsigned long *p_dev_flags);
+static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv);
+inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan);
+
+//-----------------------------------------------------------------------------
+// Net device related private functions.
+//-----------------------------------------------------------------------------
+static int  cpmac_dev_init(struct net_device *p_dev);
+static int  cpmac_dev_open( struct net_device *dev );
+static int  cpmac_dev_close(struct net_device *p_dev);
+static void cpmac_dev_mcast_set(struct net_device *p_dev);
+static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr);
+static int  cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev);
+static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *dev);
+
+static int cpmac_p_dev_enable( struct net_device *p_dev);
+
+
+
+/* Max. Reserved headroom in front of each packet so that the headers can be added to
+ * a packet. Worst case scenario would be PPPoE + 2684 LLC Encapsulation + Ethernet
+ * header. */
+#define MAX_RESERVED_HEADROOM       20
+
+/* This is the MAX size of the static buffer for pure data. */
+#define MAX_SIZE_STATIC_BUFFER      1600
+
+typedef struct DRIVER_BUFFER
+{
+	/* Pointer to the allocated data buffer. This is the static data buffer 
+     * allocated for the TI-Cache. 60 bytes out of the below buffer are required
+     * by the SKB shared info. We always reserve at least MAX_RESERVED_HEADROOM bytes 
+     * so that the packets always have sufficient headroom. */
+	char					ptr_buffer[MAX_SIZE_STATIC_BUFFER + MAX_RESERVED_HEADROOM + 60];
+
+	/* List of the driver buffers. */
+	struct DRIVER_BUFFER*	ptr_next;
+}DRIVER_BUFFER;
+
+typedef struct DRIVER_BUFFER_MCB
+{
+	/* List of the driver buffers. */
+	DRIVER_BUFFER*	ptr_available_driver_buffers;
+
+    /* The number of available buffers. */
+    int                     num_available_buffers;
+}DRIVER_BUFFER_MCB;
+
+DRIVER_BUFFER_MCB	driver_mcb;
+int                 hybrid_mode = 0;
+
+static union {
+	struct sk_buff_head	list;
+	char			pad[SMP_CACHE_BYTES];
+} skb_head_pool[NR_CPUS];
+
+/**************************************************************************
+ * FUNCTION NAME : ti_release_skb
+ **************************************************************************
+ * DESCRIPTION   :
+ *  This function is called from the ti_alloc_skb when there were no more
+ *  data buffers available. The allocated SKB had to released back to the 
+ *  data pool. The reason why this function was moved from the fast path 
+ *  below was because '__skb_queue_head' is an inline function which adds
+ *  a large code chunk on the fast path.
+ *
+ * NOTES         :
+ *  This function is called with interrupts disabled. 
+ **************************************************************************/
+static void ti_release_skb (struct sk_buff_head* list, struct sk_buff* skb)
+{
+    __skb_queue_head(list, skb);
+    return;
+}
+
+/**************************************************************************
+ * FUNCTION NAME : ti_alloc_skb
+ **************************************************************************
+ * DESCRIPTION   :
+ *  The function is called to allocate memory from the static allocated 
+ *  TI-Cached memory pool.
+ *
+ * RETURNS       :
+ *      Allocated static memory buffer - Success
+ *      NULL                           - Error.
+ **************************************************************************/
+struct sk_buff *ti_alloc_skb(unsigned int size,int gfp_mask)
+{
+    register struct sk_buff*    skb;
+    unsigned long               flags;
+	struct sk_buff_head*        list;
+	DRIVER_BUFFER*	            ptr_node = NULL;
+
+    /* Critical Section Begin: Lock out interrupts. */
+    local_irq_save(flags);
+
+    /* Get the SKB Pool list associated with the processor and dequeue the head. */
+    list = &skb_head_pool[smp_processor_id()].list;
+    skb = __skb_dequeue(list);
+
+    /* Align the data size. */
+    size = SKB_DATA_ALIGN(size);
+
+    /* Did we get one. */
+    if (skb != NULL)
+    {
+        /* YES. Now get a data block from the head of statically allocated block. */
+        ptr_node = driver_mcb.ptr_available_driver_buffers;
+	    if (ptr_node != NULL)
+        {
+            /* YES. Got a data block. Advance the free list pointer to the next available buffer. */
+	        driver_mcb.ptr_available_driver_buffers = ptr_node->ptr_next;
+            ptr_node->ptr_next = NULL;
+
+            /* Decrement the number of available data buffers. */
+            driver_mcb.num_available_buffers = driver_mcb.num_available_buffers - 1;
+        }
+        else
+        {
+          /* NO. Was unable to get a data block. So put the SKB back on the free list. 
+           * This is slow path. */
+#ifdef DEBUG_SKB 
+           printk ("DEBUG: No Buffer memory available: Number of free buffer:%d.\n",
+                   driver_mcb.num_available_buffers);
+#endif
+           ti_release_skb (list, skb);
+        }
+    }
+
+    /* Critical Section End: Unlock interrupts. */
+    local_irq_restore(flags);
+
+    /* Did we get an SKB and data buffer. Proceed only if we were succesful in getting both else drop */
+    if (skb != NULL && ptr_node != NULL)
+    {
+       	/* XXX: does not include slab overhead */ 
+        skb->truesize = size + sizeof(struct sk_buff);
+ 
+        /* Load the data pointers. */
+     	skb->head = ptr_node->ptr_buffer;
+        skb->data = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
+	    skb->tail = ptr_node->ptr_buffer + MAX_RESERVED_HEADROOM;
+        skb->end  = ptr_node->ptr_buffer + size + MAX_RESERVED_HEADROOM;
+
+	    /* Set up other state */
+    	skb->len    = 0;
+    	skb->cloned = 0;
+        skb->data_len = 0;
+    
+        /* Mark the SKB indicating that the SKB is from the TI cache. */
+        skb->cb[45] = 1;
+
+    	atomic_set(&skb->users, 1); 
+    	atomic_set(&(skb_shinfo(skb)->dataref), 1);
+        skb_shinfo(skb)->nr_frags = 0;
+	    skb_shinfo(skb)->frag_list = NULL;
+        return skb;
+    }
+    else
+    {
+        /* Control comes here only when there is no statically allocated data buffers
+         * available. This case is handled using the mode selected
+         *
+         * 1. Hybrid Mode.
+         *  In that case lets jump to the old allocation code. This way we
+         *  can allocate a small number of data buffers upfront and the rest will hit
+         *  this portion of the code, which is slow path. Note the number of hits here
+         *  should be kept as low as possible to satisfy performance requirements. 
+         *
+         * 2. Pure Static Mode.
+         *  Return NULL the user should have tuned the number of static buffers for
+         *  worst case scenario. So return NULL and let the drivers handle the error. */
+        if (hybrid_mode == 1)
+        {
+            /* Hybrid Mode: Old allocation. */
+            return dev_alloc_skb(size);
+        }
+        else
+        {
+            /* Pure Static Mode: No buffers available. */
+            return NULL;
+        }
+    }
+}
+
+/**************************************************************************
+ * FUNCTION NAME : ti_skb_release_fragment
+ **************************************************************************
+ * DESCRIPTION   :
+ *  This function is called to release fragmented packets. This is NOT in 
+ *  the fast path and this function requires some work. 
+ **************************************************************************/
+static void ti_skb_release_fragment(struct sk_buff *skb)
+{
+    if (skb_shinfo(skb)->nr_frags)
+    {
+        /* PANKAJ TODO: This portion has not been tested. */
+	    int i;
+#ifdef DEBUG_SKB 
+        printk ("DEBUG: Releasing fragments in TI-Cached code.\n");
+#endif
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
+		    printk ("DEBUG: Fragmented Page = 0x%p.\n", skb_shinfo(skb)->frags[i].page);
+    }
+
+    /* Check if there were any fragments present and if so clean all the SKB's. 
+     * This is required to recursivly clean the SKB's. */
+	if (skb_shinfo(skb)->frag_list)
+	    skb_drop_fraglist(skb);
+
+    return;
+}
+
+/**************************************************************************
+ * FUNCTION NAME : ti_skb_release_data
+ **************************************************************************
+ * DESCRIPTION   :
+ *  The function is called to release the SKB back into the TI-Cached static
+ *  memory pool. 
+ **************************************************************************/
+static void ti_skb_release_data(struct sk_buff *skb)
+{
+    DRIVER_BUFFER*	ptr_node;
+    unsigned long   flags;
+
+    /* The SKB data can be cleaned only if the packet has not been cloned and we
+     * are the only one holding a reference to the data. */
+	if (!skb->cloned || atomic_dec_and_test(&(skb_shinfo(skb)->dataref)))
+    {
+        /* Are there any fragments associated with the SKB ?*/
+		if ((skb_shinfo(skb)->nr_frags != 0) || (skb_shinfo(skb)->frag_list != NULL))
+        {
+            /* Slow Path: Try and clean up the fragments. */
+            ti_skb_release_fragment (skb);
+        }
+
+        /* Cleanup the SKB data memory. This is fast path. */
+        ptr_node = (DRIVER_BUFFER *)skb->head;
+
+        /* Critical Section: Lock out interrupts. */
+        local_irq_save(flags);
+
+        /* Add the data buffer to the list of available buffers. */
+        ptr_node->ptr_next = driver_mcb.ptr_available_driver_buffers;
+	    driver_mcb.ptr_available_driver_buffers = ptr_node;
+
+        /* Increment the number of available data buffers. */
+        driver_mcb.num_available_buffers = driver_mcb.num_available_buffers + 1;
+
+        /* Criticial Section: Unlock interrupts. */
+        local_irq_restore(flags);
+	}
+    return;
+}
+
+
+
+
+static unsigned char str2hexnum(unsigned char c)
+{
+        if(c >= '0' && c <= '9')
+                return c - '0';
+        if(c >= 'a' && c <= 'f')
+                return c - 'a' + 10;
+        if(c >= 'A' && c <= 'F')
+                return c - 'A' + 10;
+        return 0; 
+}
+
+static void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+    int i;
+    unsigned char num;
+    for(i = 0; i < 6; i++) {
+        if((*str == '.') || (*str == ':'))
+            str++;
+        num = str2hexnum(*str++) << 4;
+        num |= (str2hexnum(*str++));
+        ea[i] = num;
+    }
+}
+
+//-----------------------------------------------------------------------------
+// Statistics related private functions.
+//-----------------------------------------------------------------------------
+static int cpmac_p_update_statistics(struct net_device *p_dev, char *buf, int limit, int *p_len)
+{
+    int                 ret_val   = -1;
+    unsigned long rx_hal_errors   = 0;
+    unsigned long rx_hal_discards = 0;
+    unsigned long tx_hal_errors   = 0;
+    unsigned long ifOutDiscards   = 0;
+    unsigned long ifInDiscards    = 0;
+    unsigned long ifOutErrors     = 0;
+    unsigned long ifInErrors      = 0;
+
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
+    CPMAC_DEVICE_MIB_T   *p_device_mib = p_cpmac_priv->device_mib;
+    CPMAC_DRV_STATS_T    *p_stats      = p_cpmac_priv->stats;
+    CPMAC_DEVICE_MIB_T   local_mib;
+    CPMAC_DEVICE_MIB_T   *p_local_mib  = &local_mib;
+
+    struct net_device_stats *p_net_dev_stats = &p_cpmac_priv->net_dev_stats;
+
+    int                 len      = 0;
+    int  dev_mib_elem_count      = 0;
+
+    /* do not access the hardware if it is in the reset state. */
+    if(!test_bit(0, &p_cpmac_priv->set_to_close))
+    {
+        if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsDump", "Get",
+ 			                 p_local_mib) != 0)
+        {
+            errPrint("The stats dump for %s is failing.\n", p_dev->name);
+            return(ret_val);
+        }
+
+        p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
+
+        dev_mib_elem_count = sizeof(CPMAC_DEVICE_MIB_T)/sizeof(unsigned long);
+
+        /* Update the history of the stats. This takes care of any reset of the 
+         * device and stats that might have taken place during the life time of 
+         * the driver. 
+         */
+        while(dev_mib_elem_count--)
+        {
+            *((unsigned long*) p_device_mib + dev_mib_elem_count) += 
+            *((unsigned long*) p_local_mib  + dev_mib_elem_count); 
+        }
+    }
+
+    /* RFC2665, section 3.2.7, page 9 */
+    rx_hal_errors          = p_device_mib->ifInFragments       +
+	                     p_device_mib->ifInCRCErrors       +
+	                     p_device_mib->ifInAlignCodeErrors +
+	                     p_device_mib->ifInJabberFrames;
+
+    /* RFC2233 */
+    rx_hal_discards        = p_device_mib->ifRxDMAOverruns;
+
+    /* RFC2665, section 3.2.7, page 9 */
+    tx_hal_errors          = p_device_mib->ifExcessiveCollisionFrames +
+                             p_device_mib->ifLateCollisions           +
+                             p_device_mib->ifCarrierSenseErrors       +
+                             p_device_mib->ifOutUnderrun;
+
+    /* if not set, the short frames (< 64 bytes) are considered as errors */
+    if(!p_cpmac_priv->flags & IFF_PRIV_SHORT_FRAMES)
+        rx_hal_errors += p_device_mib->ifInUndersizedFrames;
+
+    /* if not set, the long frames ( > 1518) are considered as errors 
+     * RFC2665, section 3.2.7, page 9. */
+    if(!p_cpmac_priv->flags & IFF_PRIV_JUMBO_FRAMES)
+        rx_hal_errors += p_device_mib->ifInOversizedFrames;
+
+    /* if not in promiscous, then non addr matching frames are discarded */
+    /* CPMAC 2.0 Manual Section 2.8.1.14 */
+    if(!p_dev->flags & IFF_PROMISC)
+    {
+        ifInDiscards  +=  p_device_mib->ifInFilteredFrames;
+    }
+
+     /* total rx discards = hal discards + driver discards. */
+    ifInDiscards  = rx_hal_discards + p_net_dev_stats->rx_dropped;
+    ifInErrors    = rx_hal_errors;
+
+    ifOutErrors   = tx_hal_errors;
+    ifOutDiscards = p_net_dev_stats->tx_dropped;
+
+    /* Let us update the net device stats struct. To be updated in the later releases.*/
+    p_cpmac_priv->net_dev_stats.rx_errors  = ifInErrors;
+    p_cpmac_priv->net_dev_stats.collisions = p_device_mib->ifCollisionFrames;
+
+    if(buf == NULL || limit == 0)
+    {
+        return(0);
+    }
+
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %ld\n", "ifSpeed",                                 (long)p_cpmac_priv->link_speed);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "dot3StatsDuplexStatus",                   (long)p_cpmac_priv->link_mode);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifAdminStatus",                           (long)(p_dev->flags & IFF_UP ? 1:2));
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOperStatus",                            (long)(((p_dev->flags & IFF_UP) && netif_carrier_ok(p_dev)) ? 1:2));
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLastChange",                            p_stats->start_tick);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInDiscards",                            ifInDiscards);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInErrors",                              ifInErrors);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutDiscards",                           ifOutDiscards);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutErrors",                             ifOutErrors);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInGoodFrames",                          p_device_mib->ifInGoodFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInBroadcasts",                          p_device_mib->ifInBroadcasts);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInMulticasts",                          p_device_mib->ifInMulticasts);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInPauseFrames",                         p_device_mib->ifInPauseFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInCRCErrors",                           p_device_mib->ifInCRCErrors);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInAlignCodeErrors",                     p_device_mib->ifInAlignCodeErrors);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOversizedFrames",                     p_device_mib->ifInOversizedFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInJabberFrames",                        p_device_mib->ifInJabberFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInUndersizedFrames",                    p_device_mib->ifInUndersizedFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFragments",                           p_device_mib->ifInFragments);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInFilteredFrames",                      p_device_mib->ifInFilteredFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInQosFilteredFrames",                   p_device_mib->ifInQosFilteredFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifInOctets",                              p_device_mib->ifInOctets);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutGoodFrames",                         p_device_mib->ifOutGoodFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutBroadcasts",                         p_device_mib->ifOutBroadcasts);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutMulticasts",                         p_device_mib->ifOutMulticasts);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutPauseFrames",                        p_device_mib->ifOutPauseFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifDeferredTransmissions",                 p_device_mib->ifDeferredTransmissions);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCollisionFrames",                       p_device_mib->ifCollisionFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifSingleCollisionFrames",                 p_device_mib->ifSingleCollisionFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifMultipleCollisionFrames",               p_device_mib->ifMultipleCollisionFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifExcessiveCollisionFrames",              p_device_mib->ifExcessiveCollisionFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifLateCollisions",                        p_device_mib->ifLateCollisions);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutUnderrun",                           p_device_mib->ifOutUnderrun);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifCarrierSenseErrors",                    p_device_mib->ifCarrierSenseErrors);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifOutOctets",                             p_device_mib->ifOutOctets);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if64OctetFrames",                         p_device_mib->if64OctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if65To127POctetFrames",                   p_device_mib->if65To127OctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if128To255OctetFrames",                   p_device_mib->if128To255OctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if256To511OctetFrames",                   p_device_mib->if256To511OctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if512To1023OctetFrames",                  p_device_mib->if512To1023OctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "if1024ToUpOctetFrames",                   p_device_mib->if1024ToUPOctetFrames);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifNetOctets",                             p_device_mib->ifNetOctets);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxSofOverruns",                         p_device_mib->ifRxSofOverruns);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxMofOverruns",                         p_device_mib->ifRxMofOverruns);
+    if(len <= limit)
+        len+= sprintf(buf + len, "%-35s: %lu\n", "ifRxDMAOverruns",                         p_device_mib->ifRxDMAOverruns);
+
+    *p_len = len;
+
+    return(0);
+}
+
+
+static int cpmac_p_read_rfc2665_stats(char* buf, char **start, off_t offset, 
+		               int count, int *eof, void *data)
+{
+    int limit = count - 80;
+    int len   = 0;
+    struct net_device *p_dev = (struct net_device*)data;
+
+    cpmac_p_update_statistics(p_dev, buf, limit, &len);
+
+    *eof = 1;
+
+    return len;
+}
+
+static int cpmac_p_read_link(char *buf, char **start, off_t offset, int count, 
+                             int *eof, void *data)
+{
+    int len = 0;
+
+    struct net_device    *p_dev;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv;
+    struct net_device    *cpmac_dev_list[cpmac_devices_installed];
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
+
+    int                  i;
+    int                  phy;            /* what phy are we using? */
+
+    len += sprintf(buf+len, "CPMAC devices = %d\n",cpmac_devices_installed);
+
+    p_dev        = last_cpmac_device;
+
+    /* Reverse the the device link list to list eth0,eth1...in correct order */
+    for(i=0; i< cpmac_devices_installed; i++)
+    {
+        cpmac_dev_list[cpmac_devices_installed -(i+1)] = p_dev;
+        p_cpmac_priv = p_dev->priv;
+        p_dev = p_cpmac_priv->next_device;
+    }
+
+    for(i=0; i< cpmac_devices_installed; i++)
+    {
+        p_dev        = cpmac_dev_list[i];
+        p_cpmac_priv = p_dev->priv;
+        p_drv_hal    = p_cpmac_priv->drv_hal;
+
+        /*  This prints them out from high to low because of how the devices are linked */
+        if(netif_carrier_ok(p_dev))
+        {
+            p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "PhyNum", "Get", &phy);
+
+
+            len += sprintf(buf+len,"eth%d: Link State: %s    Phy:0x%x, Speed = %s, Duplex = %s\n",
+                           p_cpmac_priv->instance_num, "UP", phy, 
+                           (p_cpmac_priv->link_speed == 100000000) ? "100":"10",
+                           (p_cpmac_priv->link_mode  == 2) ? "Half":"Full");
+
+        }
+        else
+            len += sprintf(buf+len,"eth%d: Link State: DOWN\n",p_cpmac_priv->instance_num);
+
+        p_dev = p_cpmac_priv->next_device;
+    }
+
+    return len;
+
+}
+
+static int cpmac_p_read_stats(char* buf, char **start, off_t offset, int count,
+                              int *eof, void *data)
+{
+    struct net_device *p_dev = last_cpmac_device;
+    int                len   = 0;
+    int                limit = count - 80;
+    int i;
+    struct net_device     *cpmac_dev_list[cpmac_devices_installed];
+    CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
+    CPMAC_DEVICE_MIB_T    *p_device_mib;
+
+    /* Reverse the the device link list to list eth0,eth1...in correct order */
+    for(i=0; i< cpmac_devices_installed; i++)
+    {
+        cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
+        p_cpmac_priv = p_dev->priv;
+        p_dev = p_cpmac_priv->next_device;
+    }
+
+    for(i=0; i< cpmac_devices_installed; i++)
+    {
+        p_dev = cpmac_dev_list[i];
+
+        if(!p_dev)
+          goto proc_error;
+
+        /* Get Stats */
+        cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
+
+        p_cpmac_priv = p_dev->priv;
+        p_device_mib = p_cpmac_priv->device_mib;
+
+        /* Transmit stats */
+        if(len<=limit)
+          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1, p_dev->base_addr);
+        if(len<=limit)
+          len+= sprintf(buf+len, " Transmit Stats\n");
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Tx Valid Bytes Sent        :%lu\n",p_device_mib->ifOutOctets);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Tx Frames (Hardware)  :%lu\n",p_device_mib->ifOutGoodFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Tx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.tx_packets);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Tx Broadcast Frames   :%lu\n",p_device_mib->ifOutBroadcasts);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Tx Multicast Frames   :%lu\n",p_device_mib->ifOutMulticasts);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Pause Frames Sent          :%lu\n",p_device_mib->ifOutPauseFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Collisions                 :%lu\n",p_device_mib->ifCollisionFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Tx Error Frames            :%lu\n",p_cpmac_priv->net_dev_stats.tx_errors);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Carrier Sense Errors       :%lu\n",p_device_mib->ifCarrierSenseErrors);
+        if(len<=limit)
+          len+= sprintf(buf+len, "\n");
+
+
+        /* Receive Stats */
+        if(len<=limit)
+          len+= sprintf(buf+len, "\nCpmac %d, Address %lx\n",i+1,p_dev->base_addr);
+        if(len<=limit)
+          len+= sprintf(buf+len, " Receive Stats\n");
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Valid Bytes Received    :%lu\n",p_device_mib->ifInOctets);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Rx Frames (Hardware)  :%lu\n",p_device_mib->ifInGoodFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Rx Frames (Software)  :%lu\n",p_cpmac_priv->net_dev_stats.rx_packets);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Rx Broadcast Frames   :%lu\n",p_device_mib->ifInBroadcasts);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Good Rx Multicast Frames   :%lu\n",p_device_mib->ifInMulticasts);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Pause Frames Received      :%lu\n",p_device_mib->ifInPauseFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx CRC Errors              :%lu\n",p_device_mib->ifInCRCErrors);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Align/Code Errors       :%lu\n",p_device_mib->ifInAlignCodeErrors);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Jabbers                 :%lu\n",p_device_mib->ifInOversizedFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Filtered Frames         :%lu\n",p_device_mib->ifInFilteredFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Fragments               :%lu\n",p_device_mib->ifInFragments);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Undersized Frames       :%lu\n",p_device_mib->ifInUndersizedFrames);
+        if(len<=limit)
+          len+= sprintf(buf+len, "   Rx Overruns                :%lu\n",p_device_mib->ifRxDMAOverruns);
+    }
+
+
+    return len;
+
+ proc_error:
+    *eof=1;
+    return len;
+}
+
+static int cpmac_p_write_stats (struct file *fp, const char * buf, unsigned long count, void * data)
+{
+	char local_buf[31];
+        int  ret_val = 0;
+
+	if(count > 30)
+	{
+		printk("Error : Buffer Overflow\n");
+		printk("Use \"echo 0 > cpmac_stat\" to reset the statistics\n");
+		return -EFAULT;
+	}
+
+	copy_from_user(local_buf,buf,count);
+	local_buf[count-1]='\0'; /* Ignoring last \n char */
+        ret_val = count;
+	
+	if(strcmp("0",local_buf)==0)
+	{
+            struct net_device *p_dev = last_cpmac_device;
+            int i;
+            struct net_device     *cpmac_dev_list[cpmac_devices_installed];
+            CPMAC_PRIVATE_INFO_T  *p_cpmac_priv;
+
+            /* Valid command */
+	    printk("Resetting statistics for CPMAC interface.\n");
+
+            /* Reverse the the device link list to list eth0,eth1...in correct order */
+            for(i=0; i< cpmac_devices_installed; i++)
+            {
+                cpmac_dev_list[cpmac_devices_installed - (i+1)] = p_dev;
+                p_cpmac_priv = p_dev->priv;
+                p_dev = p_cpmac_priv->next_device;
+            }
+
+            for(i=0; i< cpmac_devices_installed; i++)
+             {
+                p_dev = cpmac_dev_list[i];
+                if(!p_dev)
+                {
+                    ret_val = -EFAULT;
+                    break;
+                }
+
+                cpmac_p_reset_statistics(p_dev);
+            }
+	}
+	else
+	{
+		printk("Error: Unknown operation on cpmac statistics\n");
+		printk("Use \"echo 0 > cpmac_stats\" to reset the statistics\n");
+		return -EFAULT;
+	}
+	
+	return ret_val;
+}
+
+static int cpmac_p_reset_statistics(struct net_device *p_dev)
+{
+    int                       ret_val  = 0;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
+
+    memset(p_cpmac_priv->device_mib, 0, sizeof(CPMAC_DEVICE_MIB_T));
+    memset(p_cpmac_priv->stats, 0, sizeof(CPMAC_DRV_STATS_T));
+    memset(&p_cpmac_priv->net_dev_stats, 0, sizeof(struct net_device_stats));
+
+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "StatsClear", "Set", NULL);
+
+    return(ret_val);
+}
+
+static int cpmac_p_get_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
+{
+    int  len                           = 0;
+    int  limit                         = count - 80;
+    char *hal_version                  = NULL;
+    struct net_device *p_dev           = last_cpmac_device;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
+
+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Version", "Get", &hal_version);
+
+    len += sprintf(buf+len, "Texas Instruments CPMAC driver version: %s\n", cpmac_version);
+
+    if(len <= limit && hal_version)
+        len += sprintf(buf+len, "Texas Instruments CPMAC HAL version: %s\n", hal_version);
+
+    return len;
+}
+
+static struct net_device_stats *cpmac_dev_get_net_stats (struct net_device *p_dev)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
+
+    cpmac_p_update_statistics(p_dev, NULL, 0, NULL);
+
+    return &p_cpmac_priv->net_dev_stats;
+}
+
+static int cpmac_p_detect_manual_cfg(int link_speed, char* link_mode, int debug)
+{
+    char *pSpeed = NULL;
+
+    if(debug == 1)
+    {
+        cpmac_debug_mode = 1;
+        dbgPrint("Enabled the debug print.\n");
+    }
+
+    if(!link_speed && !link_mode)
+    {
+        dbgPrint("No manual link params, defaulting to auto negotiation.\n");
+        return (0);
+    }
+
+    if(!link_speed || (link_speed != 10 && link_speed != 100))
+    {
+        dbgPrint("Invalid or No value of link speed specified, defaulting to auto speed.\n");
+        pSpeed = "auto";
+    }
+    else if(link_speed == 10)
+    {
+        g_cfg_start_link_params &= ~(_CPMDIO_100);
+        pSpeed = "10 Mbps";
+    }
+    else
+    {
+	g_cfg_start_link_params &= ~(_CPMDIO_10);
+        pSpeed = "100 Mbps";
+    }
+
+    if(!link_mode || (!strcmp(link_mode, "fd") && !strcmp(link_mode, "hd")))
+    {
+        dbgPrint("Invalid or No value of link mode specified, defaulting to auto mode.\n");
+    }
+    else if(!strcmp(link_mode, "hd"))
+    {
+        g_cfg_start_link_params &= ~(_CPMDIO_FD);
+    }
+    else
+    {
+        g_cfg_start_link_params &= ~(_CPMDIO_HD);
+    }
+
+    dbgPrint("Link is manually set to the speed of %s speed and %s mode.\n", 
+              pSpeed, link_mode ? link_mode : "auto");
+
+    return(0);
+}
+
+//------------------------------------------------------------------------------
+// Call back from the HAL.
+//------------------------------------------------------------------------------
+static int cpmac_p_process_status_ind(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
+{
+    struct net_device    *p_dev        = p_cpmac_priv->owner;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
+    int status;
+
+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "Status", "Get", &status);
+
+    /* We do not reflect the real link status if in loopback.
+     * After all, we want the packets to reach the hardware so
+     * that Send() should work. */
+    if(p_dev->flags & IFF_LOOPBACK)
+    {
+        dbgPrint("Maintaining the link up loopback for %s.\n", p_dev->name);
+	netif_carrier_on(p_dev);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
+//#endif
+
+        return(0);
+    }
+
+    if(status & CPMAC_STATUS_ADAPTER_CHECK) /* ???? */
+    {
+        ; /* what to do ? */
+    }    
+    else if(status)
+    {
+        if(!netif_carrier_ok(p_dev))
+	{
+            netif_carrier_on(p_cpmac_priv->owner);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
+//#endif
+	    dbgPrint("Found the Link for the CPMAC instance %s.\n", p_dev->name);
+        }
+
+        if(netif_running(p_dev) & netif_queue_stopped(p_dev))
+        {
+            netif_wake_queue(p_dev);
+        }
+
+	p_cpmac_priv->link_speed = status & CPMAC_STATUS_LINK_SPEED ? 100000000:10000000;
+	p_cpmac_priv->link_mode  = status & CPMAC_STATUS_LINK_DUPLEX? 3:2;
+
+    }
+    else
+    {
+        if(netif_carrier_ok(p_dev))
+	{
+	    /* do we need to register synchronization issues with stats here. */
+	    p_cpmac_priv->link_speed        = 100000000;
+	    p_cpmac_priv->link_mode         = 1;
+
+	    netif_carrier_off(p_dev);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//            avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
+//#endif
+
+	    dbgPrint("Lost the Link for the CPMAC for %s.\n", p_dev->name);
+	}
+
+        if(!netif_queue_stopped(p_dev))
+        {
+            netif_stop_queue(p_dev);     /* So that kernel does not keep on xmiting pkts. */
+        }
+    }
+
+    return(0);
+}
+
+//-----------------------------------------------------------------------------
+// Timer related private functions.
+//-----------------------------------------------------------------------------
+static int cpmac_p_timer_init(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
+{
+    struct timer_list *p_timer = p_cpmac_priv->timer;
+
+    init_timer(p_timer);
+    
+    p_timer                    = p_cpmac_priv->timer + TICK_TIMER;
+    p_timer->expires           = 0;
+    p_timer->data              = (unsigned long)p_cpmac_priv;
+    p_timer->function          = cpmac_p_tick_timer_expiry;
+
+    return(0);
+}
+
+#if 0
+static int cpmac_timer_cleanup(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
+{
+    struct timer_list *p_timer;
+
+    p_timer = p_cpmac_priv->timer + TICK_TIMER;
+   
+    /* use spin lock to establish synchronization with the dispatch */
+    if(p_timer->function) del_timer_sync(p_timer);
+    p_timer->function = NULL;
+
+    return (0);
+}
+#endif
+
+static int cpmac_p_start_timer(struct timer_list *p_timer, unsigned int delay_ticks)
+{
+    p_timer->expires        = jiffies + delay_ticks;
+
+    if(p_timer->function)
+    {
+        add_timer(p_timer);
+    }
+
+    return(0);
+} 
+
+static void cpmac_p_tick_timer_expiry(unsigned long p_cb_param)
+{
+    CPMAC_PRIVATE_INFO_T   *p_cpmac_priv = (CPMAC_PRIVATE_INFO_T*) p_cb_param;
+    CPMAC_DRV_HAL_INFO_T   *p_drv_hal    = p_cpmac_priv->drv_hal; 
+    struct timer_list       *p_timer     = p_cpmac_priv->timer + TICK_TIMER;
+
+    if(test_bit(0, &p_cpmac_priv->set_to_close))
+    {
+        return;
+    }
+
+    p_drv_hal->hal_funcs->Tick(p_drv_hal->hal_dev);
+  
+    cpmac_p_start_timer(p_timer, p_cpmac_priv->delay_ticks);
+}
+
+static int cpmac_p_stop_timer(struct timer_list *p_timer)
+{
+    /* Ideally we need to a set flag indicating not to start the timer again
+       before del_timer_sync() is called up. But here we assume that the 
+       caller has set the p_cpmac_priv->set_to_close (ok for now). */
+    del_timer_sync(p_timer);
+    
+    return(0);
+}
+
+//------------------------------------------------------------------------------
+// Device configuration and setup related private functions.
+//------------------------------------------------------------------------------
+static int cpmac_p_probe_and_setup_device(CPMAC_PRIVATE_INFO_T *p_cpmac_priv, 
+		                          unsigned long *p_dev_flags)
+{
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal   = p_cpmac_priv->drv_hal;
+    HAL_FUNCTIONS        *p_hal_funcs = p_drv_hal->hal_funcs;
+    HAL_DEVICE           *p_hal_dev   = p_drv_hal->hal_dev;
+    CPMAC_ABILITY_INFO_T *p_capability= p_cpmac_priv->ability_info;
+    unsigned int         val          = 0;
+    int                  channel      = 0;
+
+    p_cpmac_priv->flags                  = 0;
+
+    p_capability->promiscous             = CFG_PROMISCOUS;
+    p_capability->broadcast              = CFG_BROADCAST;
+    p_capability->multicast              = CFG_MULTICAST;
+    p_capability->all_multi              = CFG_ALL_MULTI;
+    p_capability->jumbo_frames           = CFG_JUMBO_FRAMES;
+    p_capability->short_frames           = CFG_SHORT_FRAMES;
+    p_capability->auto_negotiation       = CFG_AUTO_NEGOTIATION;
+    p_capability->link_speed             = cfg_start_link_speed;
+    p_capability->loop_back              = CFG_LOOP_BACK;
+    p_capability->tx_flow_control        = CFG_TX_FLOW_CNTL;
+    p_capability->rx_flow_control        = CFG_RX_FLOW_CNTL;
+    p_capability->tx_pacing              = CFG_TX_PACING;
+    p_capability->rx_pass_crc            = CFG_RX_PASS_CRC;
+    p_capability->qos_802_1q             = CFG_QOS_802_1Q;
+    p_capability->tx_num_chan            = CFG_TX_NUM_CHAN;
+
+    /* Lets probe the device for the configured capabilities (netdev specific).*/ 
+
+    /* Following are set in the set_multi_list, when indicated by the kernel 
+     * Promiscous and all multi.
+     */
+
+    if(p_capability->broadcast)
+    {
+        channel = 0;
+	val     = 1;
+        if((p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_EN, pszSet, &val) == 0) && 
+           (p_hal_funcs->Control(p_hal_dev, pszRX_BROAD_CH, pszSet, &channel) == 0))
+	    *p_dev_flags |= IFF_BROADCAST;
+	else
+	    p_capability->broadcast = 0; /* no broadcast capabilities */
+    }
+
+    if(p_capability->multicast)
+    {
+        val     = 1;
+	channel = 0;
+	if((p_hal_funcs->Control(p_hal_dev, pszRX_MULT_EN, pszSet, &val) == 0) &&
+	   (p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel) == 0))
+	    *p_dev_flags |= IFF_MULTICAST;
+	else
+	{
+	    p_capability->multicast = 0; 
+	    p_capability->all_multi = 0; /* no multicast, no all-multi. */
+	}
+    }
+
+    if(p_capability->loop_back)
+    {
+        ;  /* We do not put the device in loopback, if required use ioctl */
+    }
+    
+    /* Lets probe the device for the configured capabilities (Non net device specific).*/
+
+    if(p_capability->jumbo_frames)
+    {
+	val = 0;
+        if(p_hal_funcs->Control(p_hal_dev, pszRX_NO_CHAIN, pszSet, &val) == 0)
+            p_cpmac_priv->flags |= IFF_PRIV_JUMBO_FRAMES;
+	else
+	    p_capability->jumbo_frames = 0;
+    }
+
+    if(p_capability->short_frames)
+    {
+	val = 1;
+        if(p_hal_funcs->Control(p_hal_dev, pszRX_CSF_EN, pszSet, &val) == 0)
+            p_cpmac_priv->flags |= IFF_PRIV_SHORT_FRAMES;
+	else
+	    p_capability->short_frames = 0;
+    }            
+
+    val = g_cfg_start_link_params;
+
+#ifdef CONFIG_AR7_MDIX
+    if( avalanche_is_mdix_on_chip() )
+    {
+        val |= _CPMDIO_AUTOMDIX;
+    }
+#endif 
+
+    if(p_hal_funcs->Control(p_hal_dev,pszMdioConnect,pszSet, &val) !=0)
+    {
+        p_capability->link_speed = 0;
+    }
+    else
+    {
+	if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD | _CPMDIO_10))
+            p_cpmac_priv->flags |= IFF_PRIV_AUTOSPEED;
+	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_HD))
+	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_HD;
+	else if(g_cfg_start_link_params & (_CPMDIO_100 | _CPMDIO_FD))
+	    p_cpmac_priv->flags |= IFF_PRIV_LINK100_FD;
+	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_HD))
+	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_HD;
+	else if(g_cfg_start_link_params & (_CPMDIO_10 | _CPMDIO_FD))
+	    p_cpmac_priv->flags |= IFF_PRIV_LINK10_FD;
+	else
+	    ;
+    }
+
+    if(p_capability->tx_flow_control)
+    {
+	val = 1;
+        if(p_hal_funcs->Control(p_hal_dev,pszTX_FLOW_EN, pszSet, &val) ==0)
+            p_cpmac_priv->flags |= IFF_PRIV_TX_FLOW_CNTL;
+	else
+            p_capability->tx_flow_control = 0;
+    }
+
+    if(p_capability->rx_flow_control)
+    {
+	val = 1;
+        if(p_hal_funcs->Control(p_hal_dev, pszRX_FLOW_EN, pszSet, &val) ==0)
+	    p_cpmac_priv->flags |= IFF_PRIV_RX_FLOW_CNTL;
+	else
+            p_capability->rx_flow_control = 0;
+    }
+
+    if(p_capability->tx_pacing)
+    {
+	val = 1;
+        if(p_hal_funcs->Control(p_hal_dev, pszTX_PACE, pszSet, &val) ==0)
+            p_cpmac_priv->flags |= IFF_PRIV_TX_PACING;
+	else
+	    p_capability->tx_pacing = 0;
+    }
+
+    if(p_capability->rx_pass_crc)
+    {
+	val = 1;
+	if(p_hal_funcs->Control(p_hal_dev, pszRX_PASS_CRC, pszSet, &val) == 0)
+	    p_cpmac_priv->flags |= IFF_PRIV_RX_PASS_CRC;
+	else                                  
+            p_capability->rx_pass_crc = 0;
+    }
+
+    if(p_capability->qos_802_1q)
+    {
+	val  = 1;
+        if(p_hal_funcs->Control(p_hal_dev, pszRX_QOS_EN, pszSet, &val) == 0)
+            p_cpmac_priv->flags |= IFF_PRIV_8021Q_EN;
+	else
+	{
+	    p_capability->qos_802_1q = 0;
+	    p_capability->tx_num_chan= 1;
+        }
+    }
+
+    if(p_capability->tx_num_chan > 1)
+    {
+	int cfg_tx_num_chan = p_capability->tx_num_chan;
+        val = 0;
+#ifdef TEST
+	if(p_hal_funcs->Control(p_hal_dev, pszTX_NUM_CH, pszGet, &val) == 0)
+	    cfg_tx_num_chan = cfg_tx_num_chan > val ? val : cfg_tx_num_chan;
+	else 
+	    cfg_tx_num_chan = 1;
+#endif
+	p_capability->tx_num_chan = cfg_tx_num_chan;
+    }
+
+    return(0);
+}
+
+static int cpmac_p_setup_driver_params(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
+{
+   int i=0;
+   int threshold = CFG_TX_NUM_BUF_SERVICE;
+
+   char *tx_threshold_ptr = prom_getenv("threshold");
+   
+    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info = p_cpmac_priv->tx_chan_info;
+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
+    CPMAC_ABILITY_INFO_T *p_capability   = p_cpmac_priv->ability_info;
+
+    /* Timer stuff */
+    p_cpmac_priv->timer_count      = 1; /* should be < or = the MAX TIMER */
+    p_cpmac_priv->timer_created    = 0;
+    p_cpmac_priv->timer_access_hal = 1;
+
+    for(i=0; i < MAX_TIMER; i++)
+        p_cpmac_priv->timer[i].function = NULL;
+
+    p_cpmac_priv->enable_802_1q  = p_capability->qos_802_1q;  
+
+    /* Tx channel related.*/
+    p_tx_chan_info->cfg_chan     = p_capability->tx_num_chan;
+    p_tx_chan_info->opened_chan  = 0;
+    
+    if(tx_threshold_ptr)
+       threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
+    
+    if((threshold <= 0) && tx_threshold_ptr) /* If threshold set to 0 then Enable the TX interrupt */
+    {
+       threshold  = CFG_TX_NUM_BUF_SERVICE;
+       p_tx_chan_info->tx_int_disable = 0;
+       
+    }
+    else
+    {
+       p_tx_chan_info->tx_int_disable = CFG_TX_INT_DISABLE;
+    }
+
+    for(i=0; i < MAX_TX_CHAN; i++)
+    {
+       
+
+
+       p_tx_chan_info->chan[i].state         = CHAN_CLOSE; 
+       p_tx_chan_info->chan[i].num_BD        = CFG_TX_NUM_BUF_DESC;  
+       p_tx_chan_info->chan[i].buffer_size   = cpmac_max_frame_size;
+       p_tx_chan_info->chan[i].buffer_offset = CFG_TX_BUF_OFFSET;
+
+
+
+       p_tx_chan_info->chan[i].service_max   = threshold;
+    }
+    
+    if (p_tx_chan_info->tx_int_disable)
+       printk("Cpmac driver Disable TX complete interrupt setting threshold to %d.\n",threshold);
+    else
+       printk("Cpmac driver Enable TX complete interrupt\n");
+
+    
+    /* Assuming just one rx channel for now */
+    p_rx_chan_info->cfg_chan            = 1;
+    p_rx_chan_info->opened_chan         = 0;
+    p_rx_chan_info->chan->state         = CHAN_CLOSE;
+    p_rx_chan_info->chan->num_BD        = CFG_RX_NUM_BUF_DESC;
+    p_rx_chan_info->chan->buffer_size   = cpmac_max_frame_size;
+    p_rx_chan_info->chan->buffer_offset = CFG_RX_BUF_OFFSET;
+    p_rx_chan_info->chan->service_max   = CFG_RX_NUM_BUF_SERVICE;
+
+    /* Set as per RFC 2665 */
+    p_cpmac_priv->link_speed     = 100000000; 
+    p_cpmac_priv->link_mode      = 1;
+
+    p_cpmac_priv->loop_back      = 0;
+
+    return(0);
+}
+
+inline static int cpmac_p_rx_buf_setup(CPMAC_RX_CHAN_INFO_T *p_rx_chan)
+{
+    /* Number of ethernet packets & max pkt length */
+    p_rx_chan->chan->tot_buf_size  = p_rx_chan->chan->buffer_size   + 
+                                     2*(CONTROL_802_1Q_SIZE)        +
+	                             p_rx_chan->chan->buffer_offset +
+                                     ADD_FOR_4BYTE_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
+
+    p_rx_chan->chan->tot_reserve_bytes = CONTROL_802_1Q_SIZE + 
+                                         p_rx_chan->chan->buffer_offset +
+	                                 L3_ALIGN(p_rx_chan->chan->buffer_offset & 0x3);
+
+    return(0);
+}
+
+//-----------------------------------------------------------------------------
+// Net device related private functions.
+//-----------------------------------------------------------------------------
+
+/***************************************************************
+ *	cpmac_dev_init
+ *
+ *	Returns:
+ *		0 on success, error code otherwise.
+ *	Parms:
+ *		dev	The structure of the device to be
+ *			init'ed.
+ *
+ *	This function completes the initialization of the
+ *	device structure and driver.  It reserves the IO
+ *	addresses and assignes the device's methods.
+ *
+ *	
+ **************************************************************/
+
+static int cpmac_dev_init(struct net_device *p_dev)
+{
+    int retVal = -1;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    int instance_num                   = p_cpmac_priv->instance_num;
+    unsigned long net_flags = 0;
+    char *mac_name          = NULL;
+    char *mac_string        = NULL;
+
+    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info;
+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal;
+    int i;
+
+    int mem_size =    sizeof(CPMAC_DRV_HAL_INFO_T)
+		    + sizeof(CPMAC_TX_CHAN_INFO_T)
+		    + sizeof(CPMAC_RX_CHAN_INFO_T)
+		    + sizeof(CPMAC_ABILITY_INFO_T)
+                    + sizeof(CPMAC_DEVICE_MIB_T)
+                    + sizeof(CPMAC_DRV_STATS_T);
+
+
+#if defined(CONFIG_MIPS_SEAD2)
+    int prev_reset_val = RESET_REG_PRCR;
+    /* Bring the module out of reset */
+    RESET_REG_PRCR |= temp_reset_value[p_cpmac_priv->instance_num];     
+
+    /* Read the version id of the device to check if the device really exists */
+    if( VERSION(temp_base_address[p_cpmac_priv->instance_num]) == 0)
+    {
+        printk(" CPMAC:Device not found\n");
+	RESET_REG_PRCR = prev_reset_val;
+        return -ENODEV;
+    }
+
+    RESET_REG_PRCR = prev_reset_val;
+#endif
+
+
+    if((p_drv_hal = kmalloc(mem_size,  GFP_KERNEL)) == NULL)
+    {
+        errPrint("Failed to allocate memory; rewinding.\n");
+        return(-1);
+    }
+
+    memset(p_drv_hal, 0, mem_size);
+
+    /* build the cpmac private object */
+    p_cpmac_priv->drv_hal       = p_drv_hal;
+    p_cpmac_priv->tx_chan_info  = p_tx_chan_info
+                                = (CPMAC_TX_CHAN_INFO_T*)((char*)p_drv_hal 
+				  + sizeof(CPMAC_DRV_HAL_INFO_T));
+    p_cpmac_priv->rx_chan_info  = p_rx_chan_info 
+                                = (CPMAC_RX_CHAN_INFO_T*)((char *)p_tx_chan_info 
+				  + sizeof(CPMAC_TX_CHAN_INFO_T));
+    p_cpmac_priv->ability_info  = (CPMAC_ABILITY_INFO_T *)((char *)p_rx_chan_info 
+		                  + sizeof(CPMAC_RX_CHAN_INFO_T));
+    p_cpmac_priv->device_mib    = (CPMAC_DEVICE_MIB_T *)((char *)p_cpmac_priv->ability_info 
+	                          + sizeof(CPMAC_ABILITY_INFO_T));
+    p_cpmac_priv->stats         = (CPMAC_DRV_STATS_T *)((char *)p_cpmac_priv->device_mib   
+		                  + sizeof(CPMAC_DEVICE_MIB_T));
+
+    p_drv_hal->owner            = p_cpmac_priv;
+
+
+    switch(instance_num)
+    {
+
+        case 0:
+            mac_name="maca";
+
+            /* Also setting port information */
+            p_dev->if_port =  AVALANCHE_CPMAC_LOW_PORT_ID;            
+
+            break;
+
+        case 1:
+            mac_name="macb";
+
+            /* Also setting port information */
+            p_dev->if_port =  AVALANCHE_CPMAC_HIGH_PORT_ID;            
+
+            break;
+    }
+
+    if(mac_name)
+        mac_string=prom_getenv(mac_name);
+
+    if(!mac_string)
+    {
+        mac_string="08.00.28.32.06.02";
+        printk("Error getting mac from Boot enviroment for %s\n",p_dev->name);
+        printk("Using default mac address: %s\n",mac_string);
+        if(mac_name)
+        {
+            printk("Use Bootloader command:\n");
+            printk("    setenv %s xx.xx.xx.xx.xx.xx\n","<env_name>");
+            printk("to set mac address\n");
+        }
+    }
+
+    str2eaddr(p_cpmac_priv->mac_addr,mac_string);
+
+    for (i=0; i <= ETH_ALEN; i++)
+    {
+        /* This sets the hardware address */
+	p_dev->dev_addr[i] = p_cpmac_priv->mac_addr[i]; 
+    }
+
+    p_cpmac_priv->set_to_close          = 1;
+    p_cpmac_priv->non_data_irq_expected = 0;
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//    if((p_cpmac_priv->led_handle = avalanche_led_register("cpmac", instance_num)) == NULL)
+//   {
+//        errPrint("Could not allocate handle for CPMAC[%d] LED.\n", instance_num);
+//       goto cpmac_init_mod_error;
+//    }
+//#endif
+
+    if(cpmac_drv_init_module(p_drv_hal, p_dev, instance_num) != 0)
+    {
+        errPrint("Could not initialize the HAL for %s.\n", p_dev->name);
+        goto cpmac_init_mod_error;
+    } 
+
+    /* initialize the CPMAC device */
+    if (cpmac_drv_init(p_drv_hal) == -1)
+    {
+	errPrint("HAL init failed for %s.\n", p_dev->name);
+	goto cpmac_init_device_error;
+    }
+
+    if(cpmac_p_probe_and_setup_device(p_cpmac_priv, &net_flags) == -1)
+    {
+        errPrint("Failed to configure up %s.\n", p_dev->name);
+        goto cpmac_init_device_error;
+    }
+
+    if(cpmac_p_setup_driver_params(p_cpmac_priv) == -1)
+    {
+        errPrint("Failed to set driver parameters for %s.\n", p_dev->name);
+        goto cpmac_init_device_error;
+    }
+
+    cpmac_p_rx_buf_setup(p_rx_chan_info);
+
+    /* initialize the timers for the net device */
+    if(cpmac_p_timer_init(p_cpmac_priv) == -1)
+    {
+        errPrint("Failed to set timer(s) for %s.\n", p_dev->name);
+        goto cpmac_timer_init_error;
+    }
+
+    p_dev->addr_len           = 6;
+
+    p_dev->open               = &cpmac_dev_open;    /*  i.e. Start Device  */
+    p_dev->hard_start_xmit    = &cpmac_dev_tx;
+    p_dev->stop               = &cpmac_dev_close;
+    p_dev->get_stats          = &cpmac_dev_get_net_stats;
+
+    p_dev->set_multicast_list = &cpmac_dev_mcast_set;
+    p_dev->set_mac_address    = cpmac_dev_set_mac_addr;
+    /* Knocking off the default broadcast and multicast flags. Allowing the 
+       device configuration to control the flags. */
+    p_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
+    p_dev->flags |= net_flags;
+
+    netif_carrier_off(p_dev);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
+//#endif
+
+    /* Tasklet is initialized at the isr registeration time. */
+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacBase", "Get", &p_dev->base_addr);
+    p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "CpmacSize", "Get", &p_cpmac_priv->dev_size);
+
+    request_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size, p_dev->name);
+
+    retVal = 0;
+
+    if(g_init_enable_flag)
+        cpmac_p_dev_enable(p_dev);
+
+    return(retVal);
+
+cpmac_timer_init_error:
+cpmac_init_device_error  :
+    cpmac_drv_cleanup(p_drv_hal);
+
+cpmac_init_mod_error:
+    kfree(p_drv_hal);
+
+    return (retVal);
+
+} /* cpmac_dev_init */
+
+
+/***************************************************************
+ *	cpmac_p_dev_enable
+ *
+ *	Returns:
+ *		0 on success, error code otherwise.
+ *	Parms:
+ *		dev	Structure of device to be opened.
+ *
+ *	This routine puts the driver and CPMAC adapter in a
+ *	state where it is ready to send and receive packets.
+ *	
+ *
+ **************************************************************/
+int cpmac_p_dev_enable( struct net_device *p_dev)
+{
+    int ret_val = 0;
+    int channel = 0;
+ 
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
+    int max_length                       = p_rx_chan_info->chan->tot_buf_size;
+
+    p_cpmac_priv->set_to_close = 0;
+
+    if((ret_val = cpmac_drv_start(p_drv_hal, p_cpmac_priv->tx_chan_info, 
+				  p_cpmac_priv->rx_chan_info, CHAN_SETUP))==-1)
+    {
+        errPrint("%s error: failed to start the device.\n", p_dev->name);
+        ret_val = -1;
+    }
+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev,"RX_UNICAST_SET",  
+					  "Set", &channel)!=0)
+    {
+        errPrint("%s error: device chan 0 could not be enabled.\n", p_dev->name);	
+	ret_val = -1;
+    }
+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, pszRX_MAXLEN, pszSet, &max_length) != 0)
+    {
+        errPrint(" CPMAC registers can't be written \n");
+        ret_val = -1;
+    }
+    else if(p_drv_hal->hal_funcs->Control(p_drv_hal->hal_dev, "TxIntDisable", "Set", 
+            &p_cpmac_priv->tx_chan_info->tx_int_disable) != 0)
+    {    
+        errPrint(" CPMAC registers can't be written \n");
+        ret_val = -1;
+    }
+    else
+    {
+        ; // Every thing went OK. 
+    }
+    
+    return(ret_val);
+} /* cpmac_dev_enable */
+
+
+static int cpmac_dev_open(struct net_device *p_dev)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
+
+    if(!g_init_enable_flag)
+        cpmac_p_dev_enable(p_dev);
+   
+    if(request_irq(p_isr_cb_param->intr, cpmac_hal_isr, SA_INTERRUPT, 
+                   "Cpmac Driver", p_isr_cb_param))
+    {
+        errPrint("Failed to register the irq %d for Cpmac %s.\n",
+                  p_isr_cb_param->intr, p_dev->name); 
+        return (-1);          
+    }
+    
+    netif_start_queue(p_dev);
+
+    MOD_INC_USE_COUNT;
+    p_cpmac_priv->stats->start_tick = jiffies;
+    dbgPrint("Started the network queue for %s.\n", p_dev->name);    
+    return(0);
+}
+
+/***************************************************************
+ *	cpmac_p_dev_disable
+ *  
+ * 	Returns:
+ *		An error code.
+ *	Parms:
+ *		dev	The device structure of the device to
+ *			close.
+ *
+ *	This function shuts down the adapter.  
+ *
+ **************************************************************/
+int cpmac_p_dev_disable(struct net_device *p_dev)
+{
+    int ret_val = 0;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cpmac_priv->drv_hal;
+
+    set_bit(0, &p_cpmac_priv->set_to_close);
+    set_bit(0, &p_cpmac_priv->non_data_irq_expected);
+   
+    /* The driver does not re-schedule the tasklet after kill is called. So, this 
+       should take care of the bug in the kernel. */
+    tasklet_kill(&p_cpmac_priv->cpmac_isr.tasklet);
+ 
+    if(cpmac_drv_stop(p_drv_hal, p_cpmac_priv->tx_chan_info,
+		      p_cpmac_priv->rx_chan_info, 
+		      CHAN_TEARDOWN | FREE_BUFFER | BLOCKING | COMPLETE) == -1)
+    {
+        ret_val = -1;
+    }
+    else
+    {
+        /* hope that the HAL closes down the tick timer.*/
+
+        dbgPrint("Device %s Closed.\n", p_dev->name);
+        p_cpmac_priv->stats->start_tick = jiffies;
+
+        p_cpmac_priv->link_speed        = 100000000;
+        p_cpmac_priv->link_mode         = 1;
+        netif_carrier_off(p_dev);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//        avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_OFF);
+//#endif
+
+        clear_bit(0, &p_cpmac_priv->non_data_irq_expected);
+
+    }
+    
+    return (ret_val);
+
+} /* cpmac_dev_close */
+
+
+/***************************************************************
+ *	cpmac_dev_close
+ *  
+ * 	Returns:
+ *		An error code.
+ *	Parms:
+ *		dev	The device structure of the device to
+ *			close.
+ *
+ *	This function shuts down the adapter.  
+ *
+ **************************************************************/
+static int cpmac_dev_close(struct net_device *p_dev)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
+
+    /* inform the upper layers. */
+    netif_stop_queue(p_dev);
+
+    if(!g_init_enable_flag)
+        cpmac_p_dev_disable(p_dev);
+    else
+        free_irq(p_isr_cb_param->intr, p_isr_cb_param);
+
+    MOD_DEC_USE_COUNT;
+
+    return(0);
+}
+
+static void cpmac_dev_mcast_set(struct net_device *p_dev)
+{
+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
+    CPMAC_ABILITY_INFO_T    *p_capability = p_cpmac_priv->ability_info;
+    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
+    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
+    int                     val           = 1;
+    int                     channel       = 0;
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)    
+//    if(netif_carrier_ok(p_dev))
+//      avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_LINK_ON);
+//#endif
+
+    if(p_dev->flags & IFF_PROMISC)
+    {
+        if(p_capability->promiscous)
+        {       
+            /* multi mode in the HAL, check this */
+	    val = 0;
+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
+
+	    val = 1;
+            /* set the promiscous mode in the HAL */
+            p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
+            p_hal_funcs->Control(p_hal_dev, pszRX_PROM_CH, pszSet, &channel);
+
+       	    dbgPrint("%s set in the Promisc mode.\n", p_dev->name);	
+	}
+        else
+        {
+	    errPrint("%s not configured for Promisc mode.\n", p_dev->name);
+        }
+    }
+    else if(p_dev->flags & IFF_ALLMULTI)
+    {
+        if(p_capability->all_multi)
+        {	
+	    val = 0;
+	    /* disable the promiscous mode in the HAL */
+	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, "Clear", &val);
+
+	    val = 1;
+            /* set the all multi mode in the HAL */
+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, pszSet, &val);
+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULT_CH, pszSet, &channel);
+
+            dbgPrint("%s has been set to the ALL_MULTI mode.\n", p_dev->name);
+        }
+        else
+        {
+	    errPrint("%s not configured for ALL MULTI mode.\n", p_dev->name);
+        }
+    }
+    else if(p_dev->mc_count)
+    {
+        if(p_capability->multicast)
+        {
+	    struct dev_mc_list *p_dmi = p_dev->mc_list;
+            int    count;
+
+            val = 0;
+            /* clear all the previous data, we are going to populate new ones.*/
+	    p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
+	    /* disable the promiscous mode in the HAL */
+	    p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
+
+	    for(count = 0; count < p_dev->mc_count; count++, p_dmi = p_dmi->next)
+	    {
+               p_hal_funcs->Control(p_hal_dev, "RX_MULTI_SINGLE", "Set", p_dmi->dmi_addr); 
+	    }
+
+            dbgPrint("%s configured for %d multicast addresses.\n", p_dev->name, p_dev->mc_count);
+        }
+        else
+        {
+	    errPrint("%s has not been configuted for multicast handling.\n", p_dev->name);
+        }
+    }
+    else
+    {
+       val = 0;
+       /* clear all the previous data, we are going to populate new ones.*/
+       p_hal_funcs->Control(p_hal_dev, pszRX_MULTI_ALL, "Clear", &val);
+       /* disable the promiscous mode in the HAL */
+       p_hal_funcs->Control(p_hal_dev, pszRX_CAF_EN, pszSet, &val);
+       dbgPrint("Dev set to  Unicast mode.\n");
+    }
+}
+
+static int cpmac_dev_set_mac_addr(struct net_device *p_dev,void * addr)
+{
+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T    *p_drv_hal    = p_cpmac_priv->drv_hal;
+    HAL_FUNCTIONS           *p_hal_funcs  = p_drv_hal->hal_funcs;
+    HAL_DEVICE              *p_hal_dev    = p_drv_hal->hal_dev;
+    struct sockaddr *sa = addr;
+
+   memcpy(p_cpmac_priv->mac_addr,sa->sa_data,p_dev->addr_len);
+   memcpy(p_dev->dev_addr,sa->sa_data,p_dev->addr_len);
+   p_hal_funcs->Control(p_hal_dev, pszMacAddr, pszSet, p_cpmac_priv->mac_addr);   
+
+	return 0;
+
+}
+
+/* VLAN is handled by vlan/vconfig support. Here, we just check for the 
+ * 802.1q configuration of the device and en-queue the packet accordingly.
+ * We do not do any 802.1q processing here.
+ */
+static int cpmac_dev_tx( struct sk_buff *skb, struct net_device *p_dev)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
+    int channel                         = 0;
+    int ret_val                         = 0;
+    FRAGLIST             send_frag_list[1];
+
+#ifdef CPMAC_8021Q_SUPPORT
+    if(skb->len < TCI_END_OFFSET)
+    {
+        /* Whee, frame shorter than 14 bytes !! We need to copy 
+	 * fragments to understand the frame. Too much work. 
+	 * Hmm, dump it. */
+
+        /* Free the buffer */
+	goto cpmac_dev_tx_drop_pkt;
+    }
+
+    /* 802.1p/q stuff */
+    if(IS_802_1Q_FRAME(skb->data + TPID_START_OFFSET)) 
+    {
+        /* IEEE 802.1q, section 8.8 and section 8.11.9 */
+        if(!p_cpmac_priv->enable_802_1q) 
+        {
+           /* free the buffer */
+           goto cpmac_dev_tx_drop_pkt;
+        }		
+
+        channel = GET_802_1P_CHAN(p_cpmac_priv->tx_chan_info->opened_chan,
+              		          skb->data[TCI_START_OFFSET]);
+
+    }
+    /* sending a non 802.1q frame, when configured for 802.1q: dump it.*/
+    else if(p_cpmac_priv->enable_802_1q)
+    {
+         /* free the buffer */
+	 goto cpmac_dev_tx_drop_pkt;
+    }
+    else
+    {
+        ;/* it is the good old non 802.1q */
+    }
+#endif
+
+    send_frag_list->len  = skb->len;
+    send_frag_list->data = skb->data;
+
+#ifdef CPMAC_TEST
+    xdump(skb->data, skb->len, "send");
+#endif
+
+    dma_cache_wback_inv((unsigned long)skb->data, skb->len);    
+
+    if(p_drv_hal->hal_funcs->Send(p_drv_hal->hal_dev, send_frag_list, 1, 
+			          skb->len, skb, channel) != 0)
+    {
+	/* code here to stop the queue, when allowing tx timeout, perhaps next release.*/
+        p_cpmac_priv->net_dev_stats.tx_errors++;  
+#ifndef TI_SLOW_PATH
+       /* Free the skb in case of Send return error */
+        dev_kfree_skb_any(skb);
+        p_cpmac_priv->net_dev_stats.tx_dropped++;
+        return 0;
+#endif
+        goto cpmac_dev_tx_drop_pkt; 
+    }
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_TX_ACTIVITY);
+//#endif
+
+    return(ret_val);
+
+cpmac_dev_tx_drop_pkt:
+
+    p_cpmac_priv->net_dev_stats.tx_dropped++;
+    ret_val = -1;
+    return (ret_val);
+
+} /*cpmac_dev_tx */
+
+
+//------------------------------------------------------------------------------
+// Public functions : Called by outsiders to this file.
+//------------------------------------------------------------------------------
+
+
+void *cpmac_hal_malloc_buffer(unsigned int size, void* mem_base, unsigned int mem_range,
+	                      OS_SETUP *p_os_setup, HAL_RECEIVEINFO *HalReceiveInfo, 
+ 	                      OS_RECEIVEINFO **osReceiveInfo, OS_DEVICE *p_dev)
+{
+    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = (CPMAC_RX_CHAN_INFO_T *)p_os_setup;
+    int                  tot_buf_size    = p_rx_chan_info->chan->tot_buf_size;
+    int             tot_reserve_bytes    = p_rx_chan_info->chan->tot_reserve_bytes;
+    struct sk_buff  *p_skb;
+    void             *ret_ptr;
+
+    /* use TI SKB private pool */
+    p_skb = dev_alloc_skb(tot_buf_size);
+
+    if(p_skb == NULL)
+    {
+        errPrint("Failed to allocate skb for %s.\n", ((struct net_device*)p_dev)->name);
+        return (NULL);
+    }
+
+    p_skb->dev = p_dev;
+    skb_reserve(p_skb, tot_reserve_bytes);
+
+    *osReceiveInfo = p_skb;
+
+    ret_ptr = skb_put(p_skb, p_rx_chan_info->chan->buffer_size);
+
+    return(ret_ptr);
+}
+
+void cpmac_hal_isr(int irq, void *p_param, struct pt_regs *regs)
+{
+    CPMAC_ISR_INFO_T      *p_cb_param    = (CPMAC_ISR_INFO_T*) p_param;
+    CPMAC_DRV_HAL_INFO_T  *p_drv_hal     = p_cb_param->owner;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_drv_hal->owner;
+    int                   pkts_to_handle = 0;
+
+    if(p_cpmac_priv->non_data_irq_expected)
+    {
+        p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
+        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
+    }
+    else if(!p_cpmac_priv->set_to_close)
+        tasklet_schedule(&((CPMAC_ISR_INFO_T*) p_param)->tasklet);
+    else
+        ; // back off from doing anything more. We are closing down.
+}
+
+void cpmac_handle_tasklet(unsigned long data)
+{
+    CPMAC_ISR_INFO_T     *p_cb_param   = (CPMAC_ISR_INFO_T*) data;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal    = p_cb_param->owner;
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_drv_hal->owner;
+    int                  pkts_to_handle;
+
+    p_cb_param->hal_isr(p_drv_hal->hal_dev, &pkts_to_handle);
+
+    if(test_bit(0, &p_cpmac_priv->non_data_irq_expected) || !pkts_to_handle)
+        p_drv_hal->hal_funcs->PacketProcessEnd(p_drv_hal->hal_dev);
+    else if(!test_bit(0, &p_cpmac_priv->set_to_close))
+        tasklet_schedule(&p_cb_param->tasklet);
+    else
+        ; // Back off from processing packets we are closing down.
+}
+
+int cpmac_hal_control(OS_DEVICE *p_dev, const char *key, 
+	              const char *action, void *value)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_dev->priv;
+    int ret_val = -1;
+
+    if(key == NULL)
+    {
+        dbgPrint("Encountered NULL key.\n");
+	return (-1);
+    }
+
+    if(cpmac_ci_strcmp(key, "Sleep") == 0 && value != NULL)
+    {
+        unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
+	unsigned int requested_clocks = *(unsigned int*)value;
+	unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
+        mdelay(requested_ticks); 
+	ret_val = 0;
+    }
+    else if(cpmac_ci_strcmp(key, "StateChange") == 0)
+    {
+        ret_val = cpmac_p_process_status_ind(p_cpmac_priv);
+    }
+    else if(cpmac_ci_strcmp(key, "Tick") == 0 && action != NULL)
+    {
+	if(cpmac_ci_strcmp(action, "Set") == 0 && value != NULL)
+	{
+            if(*(unsigned int*)value == 0)
+            {
+                cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
+                ret_val = 0;
+            }
+            else
+            {
+                unsigned int clocks_per_tick  = cpmac_cpu_freq/HZ;
+	        unsigned int requested_clocks = *(unsigned int*)value;
+	        unsigned int requested_ticks  = (requested_clocks + clocks_per_tick - 1)/clocks_per_tick;
+
+                p_cpmac_priv->delay_ticks =  requested_ticks; /* save it for re-triggering */
+	        ret_val = cpmac_p_start_timer(p_cpmac_priv->timer + TICK_TIMER, 
+		  	                      p_cpmac_priv->delay_ticks);
+            }
+	}
+        else if(cpmac_ci_strcmp(action, "Clear") == 0)
+        {
+            ret_val = cpmac_p_stop_timer(p_cpmac_priv->timer + TICK_TIMER);
+        }
+        else
+            ;
+    }
+    else if(cpmac_ci_strcmp(key, "MacAddr") == 0 && action != NULL)
+    {
+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
+	{
+            *(char **)value = p_cpmac_priv->mac_addr; 
+	    ret_val = 0;
+	}
+    }
+    else if(cpmac_ci_strcmp(key, "CpuFreq") == 0)
+    {
+       if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
+       {
+           *(unsigned int *)value = cpmac_cpu_freq;
+           dbgPrint("Cpu frequency for cpmacs is %u\n",cpmac_cpu_freq);
+           ret_val = 0;
+       }
+    }
+    else if(cpmac_ci_strcmp(key, "SioFlush") == 0)
+    {
+       ret_val = 0;
+       dbgPrint("\n"); 
+    }
+    else if(cpmac_ci_strcmp(key, "CpmacFrequency") == 0)
+    {
+        /* For Sangam cpmac clock is off the PBUS */
+        /* OS Needs to supply CORRECT frequency */
+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
+        {
+            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
+            ret_val = 0;
+        }
+    }
+    /* For now, providing back the default values. */
+    else if(cpmac_ci_strcmp(key, "MdioClockFrequency") == 0)
+    {
+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
+        {
+            *(unsigned int *)value = 2200000;  /*DEFAULT */
+            ret_val = 0;
+        }
+    }
+    /* For now, providing back the default values. */
+    else if(cpmac_ci_strcmp(key, "MdioBusFrequency") == 0)
+    {
+        /* For Sangam MdioBusFreq is off the PBUS */
+        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
+        {
+            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
+            ret_val = 0;
+        }
+    }
+  
+#if 0 
+#if defined(CONFIG_AVALANCHE_AUTO_MDIX) 
+    /* supporting Mdio Mdix switching */
+    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
+    {
+        /* For Sangam Mdio-switching  action should be always "set"*/
+        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
+        {
+           unsigned  int mdix =  *((unsigned int *) value) ;
+
+           if(mdix)
+              avalanche_set_phy_into_mdix_mode();
+
+           else
+              avalanche_set_phy_into_mdi_mode();  
+  
+           ret_val = 0;
+        } 
+
+    }
+#endif
+#endif
+    else if(cpmac_ci_strcmp(key, hcMdioMdixSwitch) == 0)
+    {
+        /* For Sangam Mdio-switching  action should be always "set"*/
+        if(cpmac_ci_strcmp(action, hcSet) == 0 && value != NULL )
+        {
+           unsigned  int mdix =  *((unsigned int *) value) ;
+
+#ifdef CONFIG_AR7_MDIX
+	   avalanche_set_mdix_on_chip(0xa8610000 , mdix ? 1: 0);
+#endif
+  
+           ret_val = 0;
+        } 
+
+    }
+
+    return(ret_val);
+}
+
+
+int cpmac_hal_receive(OS_DEVICE *p_dev, FRAGLIST *fragList, 
+                             unsigned int fragCount,
+                             unsigned int packet_size, 
+                             HAL_RECEIVEINFO *hal_receive_info,
+                             unsigned int mode)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
+    struct sk_buff       *p_skb         = fragList[0].OsInfo;
+    p_skb->len                          = fragList[0].len;    
+
+    /* invalidate the cache. */
+    dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
+#ifdef CPMAC_TEST
+    xdump(p_skb->data, p_skb->len, "recv");
+#endif
+#ifdef CPMAC_8021Q_SUPPORT
+    /* 802.1q stuff, just does the basic checking here. */
+    if(!p_cpmac_priv->enable_802_1q      &&
+       p_skb->len > TCI_END_OFFSET       &&
+       IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
+    {
+         goto cpmac_hal_recv_frame_mismatch;
+    }
+#endif
+    if(fragCount > 1) 	    
+    {	    
+       int     len;
+       struct sk_buff *p_temp_skb;
+       CPMAC_RX_CHAN_INFO_T *p_rx_chan_info = p_cpmac_priv->rx_chan_info;
+       int     count;
+       
+       dbgPrint("Recv: It is multifragment for %s.\n", p_dev->name);
+       
+       p_skb = dev_alloc_skb(packet_size + 
+          p_rx_chan_info->chan->tot_reserve_bytes); 
+       if(p_skb == NULL) 
+       {
+          p_cpmac_priv->net_dev_stats.rx_errors++;
+          goto cpmac_hal_recv_alloc_failed;
+       }
+       
+       p_skb->dev = p_dev;
+       skb_reserve(p_skb, p_rx_chan_info->chan->tot_reserve_bytes);
+       
+       for(count = 0; count < fragCount; count++)
+       {
+          p_temp_skb = fragList[count].OsInfo;
+          len        = fragList[count].len;
+          
+          dma_cache_inv((unsigned long)p_temp_skb->data, len);
+          
+          memcpy(skb_put(p_skb, len), p_temp_skb->data, len);
+          dev_kfree_skb_any(p_temp_skb);
+       }
+    }
+    
+
+#if defined(CONFIG_MIPS_AVALANCHE_MARVELL)                                                                                                   
+ /* Fetch the receiving port information from EGRESS TRAILOR Bytes*/         
+     p_dev->if_port = (unsigned char)p_skb->data[packet_size -(EGRESS_TRAILOR_LEN-1)] + AVALANCHE_MARVELL_BASE_PORT_ID;
+    skb_trim(p_skb, packet_size - EGRESS_TRAILOR_LEN);                                                                       
+#else                                                                                                                        
+    /* set length & tail */                                                                                                  
+    skb_trim(p_skb, packet_size);                                                                                            
+#endif 
+ 
+    p_skb->protocol = eth_type_trans(p_skb, p_dev);
+
+    netif_rx(p_skb);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//    avalanche_led_action(p_cpmac_priv->led_handle, CPMAC_RX_ACTIVITY);	
+//#endif
+
+    p_cpmac_priv->net_dev_stats.rx_packets++;
+    p_cpmac_priv->net_dev_stats.rx_bytes += packet_size;
+
+    p_drv_hal->hal_funcs->RxReturn(hal_receive_info,1);
+
+    return(0);
+
+cpmac_hal_recv_alloc_failed:
+
+#ifdef CPMAC_8021Q_SUPPORT
+cpmac_hal_recv_frame_mismatch:
+#endif
+ 
+    fragCount--;
+
+    do
+    {
+        dev_kfree_skb_any(fragList[fragCount].OsInfo);
+    }
+    while(fragCount--);
+
+    p_cpmac_priv->net_dev_stats.rx_dropped++;
+
+    return(-1);
+} /*cpmac_receive*/
+
+
+void cpmac_hal_tear_down_complete(OS_DEVICE*a, int b, int ch)
+{
+    dbgPrint("what to do with this.\n");
+}
+
+
+int  cpmac_hal_send_complete(OS_SENDINFO *p_skb)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv = p_skb->dev->priv;
+
+    p_cpmac_priv->net_dev_stats.tx_packets++;
+    p_cpmac_priv->net_dev_stats.tx_bytes += p_skb->len;
+    
+    dev_kfree_skb_any(p_skb);
+
+    return(0);
+}
+
+
+int cpmac_reset(CPMAC_PRIVATE_INFO_T *p_cpmac_priv)
+{
+    // code here to reset the device/hal. Not now.
+
+   netif_wake_queue(p_cpmac_priv->owner);
+   return(0);
+}
+
+#ifdef CPMAC_TEST
+
+#define isprint(a) ((a >=' ')&&(a<= '~'))
+void xdump( u_char*  cp, int  length, char*  prefix )
+{
+    int col, count;
+    u_char prntBuf[120];
+    u_char*  pBuf = prntBuf;
+    count = 0;
+    while(count < length){
+        pBuf += sprintf( pBuf, "%s", prefix );
+        for(col = 0;count + col < length && col < 16; col++){
+            if (col != 0 && (col % 4) == 0)
+                pBuf += sprintf( pBuf, " " );
+            pBuf += sprintf( pBuf, "%02X ", cp[count + col] );
+        }
+        while(col++ < 16){      /* pad end of buffer with blanks */
+            if ((col % 4) == 0)
+                sprintf( pBuf, " " );
+            pBuf += sprintf( pBuf, "   " );
+        }
+        pBuf += sprintf( pBuf, "  " );
+        for(col = 0;count + col < length && col < 16; col++){
+            if (isprint((int)cp[count + col]))
+                pBuf += sprintf( pBuf, "%c", cp[count + col] );
+            else
+                pBuf += sprintf( pBuf, "." );
+                }
+        sprintf( pBuf, "\n" );
+        // SPrint(prntBuf);
+        printk(prntBuf);
+        count += col;
+        pBuf = prntBuf;
+    }
+
+}  /* close xdump(... */
+#endif
+
+
+static int __init cpmac_dev_probe(void)
+{
+    int     retVal         = 0;
+    int     unit;
+    int     instance_count = CONFIG_MIPS_CPMAC_PORTS;
+
+    //cpmac_cpu_freq = avalanche_clkc_get_freq(CLKC_MIPS);
+    cpmac_cpu_freq = CONFIG_AR7_CPU * 1000 * 1000;
+
+    build_psp_config();                       
+
+    for(unit = 0; unit < instance_count; unit++)
+    {
+        struct net_device	        *p_dev;
+        CPMAC_PRIVATE_INFO_T            *p_cpmac_priv;
+        size_t		                dev_size;
+	int                             failed;
+
+        dev_size =    sizeof(struct net_device) 
+	            + sizeof(CPMAC_PRIVATE_INFO_T);
+
+
+        if((p_dev = (struct net_device *) kmalloc(dev_size, GFP_KERNEL)) == NULL)
+        {
+            dbgPrint( "Could not allocate memory for device.\n" );
+            retVal = -ENOMEM;
+            break;
+        }            
+               
+        memset(p_dev, 0, dev_size );
+
+        p_dev->priv                 = p_cpmac_priv
+                                    = (CPMAC_PRIVATE_INFO_T*)(((char *) p_dev) + sizeof(struct net_device));
+        p_cpmac_priv->owner         = p_dev;
+	
+        ether_setup(p_dev); 
+
+	p_cpmac_priv->instance_num  = unit;
+        p_dev->init                 = cpmac_dev_init;
+
+        g_dev_array[p_cpmac_priv->instance_num] = p_dev;
+        
+#if defined CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC
+        g_init_enable_flag = 1;
+        printk("Cpmac driver is allocating buffer memory at init time.\n");
+#endif
+
+	/* This section gives a default value by the number of PHY in order to
+	 * replace the default MACRO. */
+	{
+	    char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
+	    if(!mac_port || 0 == strcmp(mac_port, "1")) {
+		printk("Using the MAC with external PHY\n");
+		cfg_start_link_speed = _CPMDIO_NOPHY;
+		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE + 4;
+	    }
+	    else {
+		printk("Using the MAC with internal PHY\n");
+		cfg_start_link_speed = CFG_START_LINK_SPEED;
+		cpmac_max_frame_size = CPMAC_MAX_FRAME_SIZE;
+	    }
+	    g_cfg_start_link_params = cfg_start_link_speed;
+	}
+
+        cpmac_p_detect_manual_cfg(cfg_link_speed, cfg_link_mode, cpmac_debug_mode);
+
+    	failed = register_netdev(p_dev);
+        if (failed)
+        {
+            dbgPrint("Could not register device for inst %d because of reason \
+                      code %d.\n", unit, failed);
+            retVal = -1;
+            kfree(p_dev);
+            break;
+        }           
+        else
+        {
+
+            char proc_name[100];
+            int  proc_category_name_len = 0;
+
+	    p_cpmac_priv->next_device = last_cpmac_device;
+            last_cpmac_device         = p_dev;
+
+    	    dbgPrint(" %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq,
+    	    	       (int) p_dev->base_addr);
+
+	    strcpy(proc_name, "avalanche/");
+            strcat(proc_name, p_dev->name);
+            proc_category_name_len = strlen(proc_name);
+
+            strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
+            create_proc_read_entry(proc_name,0,NULL,cpmac_p_read_rfc2665_stats, p_dev);
+
+    	}
+    }
+
+    if(retVal == 0)
+    {
+	/* To maintain backward compatibility with NSP. */
+        gp_stats_file = create_proc_entry("avalanche/cpmac_stats", 0644, NULL);
+        if(gp_stats_file)
+        {
+            gp_stats_file->read_proc  = cpmac_p_read_stats;
+            gp_stats_file->write_proc = cpmac_p_write_stats;
+        }
+	create_proc_read_entry("avalanche/cpmac_link", 0, NULL, cpmac_p_read_link, NULL);
+	create_proc_read_entry("avalanche/cpmac_ver", 0, NULL, cpmac_p_get_version, NULL);
+
+    }
+   
+    cpmac_devices_installed  = unit;
+    dbgPrint("Installed %d cpmac instances.\n", unit);
+    return ( (unit >= 0 ) ? 0 : -ENODEV );
+
+} /* init_module */
+
+
+/***************************************************************
+ *	cleanup_module
+ *
+ *	Returns:
+ *		Nothing
+ *	Parms:
+ *		None
+ *
+ *	Goes through the CpmacDevices list and frees the device
+ *	structs and memory associated with each device (lists
+ *	and buffers).  It also ureserves the IO port regions
+ *	associated with this device.
+ *
+ **************************************************************/
+
+void cpmac_exit(void)
+{
+    struct net_device       *p_dev;
+    CPMAC_PRIVATE_INFO_T    *p_cpmac_priv;
+
+    while (cpmac_devices_installed) 
+    {
+        char proc_name[100];
+        int  proc_category_name_len = 0;
+
+        p_dev = last_cpmac_device;
+        p_cpmac_priv = (CPMAC_PRIVATE_INFO_T *) p_dev->priv;
+
+    	dbgPrint("Unloading %s irq=%2d io=%04x\n",p_dev->name, (int) p_dev->irq, (int) p_dev->base_addr);
+
+        if(g_init_enable_flag)
+            cpmac_p_dev_disable(p_dev);
+      
+        cpmac_drv_cleanup(p_cpmac_priv->drv_hal);
+
+//#if defined (CONFIG_MIPS_AVALANCHE_LED)
+//        avalanche_led_unregister(p_cpmac_priv->led_handle);
+//#endif
+	strcpy(proc_name, "avalanche/");
+        strcat(proc_name, p_dev->name);
+        proc_category_name_len = strlen(proc_name);
+
+        strcpy(proc_name + proc_category_name_len, "_rfc2665_stats");
+        remove_proc_entry(proc_name, NULL);
+        
+        release_mem_region(p_dev->base_addr, p_cpmac_priv->dev_size);
+        unregister_netdev(p_dev);
+	last_cpmac_device = p_cpmac_priv->next_device;
+
+        kfree(p_cpmac_priv->drv_hal);
+        kfree(p_dev);
+     
+	cpmac_devices_installed--;
+    }
+
+    if(gp_stats_file)
+        remove_proc_entry("avalanche/cpmac_stats", NULL);
+
+    remove_proc_entry("avalanche/cpmac_link",  NULL);
+    remove_proc_entry("avalanche/cpmac_ver",   NULL);
+
+    psp_config_cleanup();
+}
+
+     
+module_init(cpmac_dev_probe);
+module_exit(cpmac_exit);
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpmac.h
--- linux.old/drivers/net/avalanche_cpmac/cpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.h	2005-07-12 02:48:42.043594000 +0200
@@ -0,0 +1,379 @@
+/******************************************************************************
+ * FILE PURPOSE:    CPMAC Linux Network Device Driver Header
+ ******************************************************************************
+ * FILE NAME:       cpmac.h
+ *
+ * DESCRIPTION:     CPMAC Network Device Driver Header
+ *
+ * REVISION HISTORY:
+ * Date            Name                   Details
+ *----------------------------------------------------------------------------- 
+ * 27 Nov 2002     Suraj S Iyer           Initial Create.
+ * 09 Jun 2003     Suraj S Iyer           Preparing for GA.
+ *
+ * (C) Copyright 2003, Texas Instruments, Inc
+ *******************************************************************************/
+
+#ifndef CPMAC_H
+#define CPMAC_H
+
+#include <linux/timer.h>
+#include <linux/netdevice.h>
+#include <asm/semaphore.h>
+#include <linux/ctype.h>
+#include <linux/interrupt.h>
+
+#include "cpmacHalLx.h"
+/*-----------------------------------------------------------------------------
+ * Config macros. Use these to config the driver.
+ *---------------------------------------------------------------------------*/
+#define CPMAC_MAX_FRAME_SIZE         1518
+
+#if defined(CONFIG_AR7WRD) || defined(CONFIG_AR7WI) || defined(CONFIG_AR7VWI)|| defined(CONFIG_AR7VW) 
+#define CFG_RX_NUM_BUF_DESC            64 
+#define CFG_RX_NUM_BUF_SERVICE         32 
+#else                                     
+#define CFG_RX_NUM_BUF_DESC            16 
+#define CFG_RX_NUM_BUF_SERVICE         8  
+#endif                                    
+
+#define CFG_RX_BUF_OFFSET              0
+
+#define CFG_TX_NUM_BUF_DESC            128
+#define CFG_TX_NUM_BUF_SERVICE         20 
+#define CFG_TX_BUF_OFFSET              0  /* Lets not change this. */
+#define CFG_TX_TIMEOUT                 2000 /* ticks*/
+#define CFG_TX_INT_DISABLE             1  /* Disable the Tx Complete interrupt */
+
+#define CFG_JUMBO_FRAMES               1
+#define CFG_SHORT_FRAMES               1
+#define CFG_PROMISCOUS                 1
+#define CFG_BROADCAST                  1
+#define CFG_MULTICAST                  1
+#define CFG_ALL_MULTI                  (1*(CFG_MULTICAST))
+#define CFG_AUTO_NEGOTIATION           1
+
+#if defined (CONFIG_MIPS_AVALANCHE_MARVELL)
+#define EGRESS_TRAILOR_LEN             4 
+#define CFG_START_LINK_SPEED           (_CPMDIO_NOPHY)
+#undef  CPMAC_MAX_FRAME_SIZE
+#define CPMAC_MAX_FRAME_SIZE          (1518 + EGRESS_TRAILOR_LEN)
+#else
+#define CFG_START_LINK_SPEED          (_CPMDIO_10 | _CPMDIO_100 | _CPMDIO_HD | _CPMDIO_FD) /* auto nego */
+#endif
+
+#define CFG_LOOP_BACK                  1
+#define CFG_TX_FLOW_CNTL               0
+#define CFG_RX_FLOW_CNTL               0
+#define CFG_TX_PACING                  0
+#define CFG_RX_PASS_CRC                0
+#define CFG_QOS_802_1Q                 0
+#define CFG_TX_NUM_CHAN                1
+
+
+/*-----------------------------------------------------------------------------
+ * Private macros.
+ *---------------------------------------------------------------------------*/
+#define MAX_TIMER               2
+#define TX_TIMER                0
+#define TICK_TIMER              0
+#define MAX_TX_CHAN             8
+
+#define CPMAC_LINK_OFF          0
+#define CPMAC_LINK_ON           1
+/*#define CPMAC_SPEED_100         2
+#define CPMAC_SPEED_10          3
+#define CPMAC_FULL_DPLX         4
+#define CPMAC_HALF_DPLX         5*/
+#define CPMAC_RX_ACTIVITY       2
+#define CPMAC_TX_ACTIVITY       3
+
+struct cpmac_timer_info;
+
+typedef int  (*CPMAC_HAL_ISR_FUNC_T)(HAL_DEVICE*, int*);
+typedef int  (*CPMAC_TIMEOUT_CB_T)(struct cpmac_timer_info*);
+
+typedef struct cpmac_ability_info
+{
+    int promiscous;
+    int broadcast;
+    int multicast;
+    int all_multi;
+    int loop_back;
+    int jumbo_frames;
+    int short_frames;
+    int auto_negotiation;
+    int tx_flow_control;
+    int rx_flow_control;
+    int tx_pacing;
+    int link_speed;
+    int rx_pass_crc;
+    int qos_802_1q;
+    int tx_num_chan;
+}
+CPMAC_ABILITY_INFO_T;
+
+#ifdef DEBUG
+typedef struct cpmac_timer_info
+{
+    void               *owner;
+    UINT32             delay_ticks;
+    WDOG_ID            timer_id;
+    UINT32             is_running;
+    UINT32             timer_set_at;
+    CPMAC_TIMEOUT_CB_T timeout_CB;
+} CPMAC_TIMER_INFO_T;
+
+typedef struct
+{
+    void               *owner;
+    unsigned int       num_cl_desc;
+    CL_DESC            *cl_desc_tbl;
+    M_CL_CONFIG        *m_cl_blk_config;
+    NET_POOL           *net_pool;
+    CL_POOL_ID         clPoolId;
+
+} CPMAC_NET_MEM_INFO_T;
+
+#endif
+
+typedef struct
+{
+    void                  *owner;
+    CPMAC_HAL_ISR_FUNC_T  hal_isr;
+    struct tasklet_struct tasklet;
+    int                   intr;
+
+} CPMAC_ISR_INFO_T;
+
+typedef struct cpmac_chan
+{
+   int num_BD;
+   int buffer_size;
+   int buffer_offset;
+   int service_max;
+   int state;
+   int tot_buf_size;
+   int tot_reserve_bytes;
+
+} CPMAC_CHAN_T;
+
+#define CHAN_CLOSE  0
+#define CHAN_OPENED 1
+
+typedef struct 
+{
+    int          cfg_chan;
+    int          dev_chan;
+    int          opened_chan;
+    CPMAC_CHAN_T chan[1];
+    int          enable_802_1q;
+
+} CPMAC_RX_CHAN_INFO_T;
+
+typedef struct
+{
+    int          cfg_chan;
+    int          dev_chan;
+    int          opened_chan;
+    int          tx_int_disable;
+    CPMAC_CHAN_T chan[MAX_TX_CHAN];
+   
+} CPMAC_TX_CHAN_INFO_T;
+
+
+
+typedef struct
+{
+   void                        *owner;
+   HAL_FUNCTIONS               *hal_funcs;
+   HAL_DEVICE                  *hal_dev;
+   OS_FUNCTIONS                *os_funcs; 
+//   SEM_ID                      chan_teardown_sem;
+   int                         non_data_irq_expected;
+} CPMAC_DRV_HAL_INFO_T;
+
+
+typedef struct
+{
+    unsigned long tx_discards;
+    unsigned long rx_discards;
+    unsigned long start_tick;
+
+} CPMAC_DRV_STATS_T;
+
+typedef struct 
+{
+    unsigned long   ifInGoodFrames;
+    unsigned long   ifInBroadcasts;
+    unsigned long   ifInMulticasts;
+    unsigned long   ifInPauseFrames;
+    unsigned long   ifInCRCErrors;
+    unsigned long   ifInAlignCodeErrors;
+    unsigned long   ifInOversizedFrames;
+    unsigned long   ifInJabberFrames;
+    unsigned long   ifInUndersizedFrames;
+    unsigned long   ifInFragments;
+    unsigned long   ifInFilteredFrames;
+    unsigned long   ifInQosFilteredFrames;
+    unsigned long   ifInOctets;
+    unsigned long   ifOutGoodFrames;
+    unsigned long   ifOutBroadcasts;
+    unsigned long   ifOutMulticasts;
+    unsigned long   ifOutPauseFrames;
+    unsigned long   ifDeferredTransmissions;
+    unsigned long   ifCollisionFrames;
+    unsigned long   ifSingleCollisionFrames;
+    unsigned long   ifMultipleCollisionFrames;
+    unsigned long   ifExcessiveCollisionFrames;
+    unsigned long   ifLateCollisions;
+    unsigned long   ifOutUnderrun;
+    unsigned long   ifCarrierSenseErrors;
+    unsigned long   ifOutOctets;
+    unsigned long   if64OctetFrames;
+    unsigned long   if65To127OctetFrames;
+    unsigned long   if128To255OctetFrames;
+    unsigned long   if256To511OctetFrames;
+    unsigned long   if512To1023OctetFrames;
+    unsigned long   if1024ToUPOctetFrames;
+    unsigned long   ifNetOctets;
+    unsigned long   ifRxSofOverruns;
+    unsigned long   ifRxMofOverruns;
+    unsigned long   ifRxDMAOverruns;
+
+} CPMAC_DEVICE_MIB_T;
+
+
+typedef struct
+{
+    void                         *owner;
+    int                          timer_count;
+    int                          timer_created;
+    struct timer_list            timer[1];
+    CPMAC_DRV_HAL_INFO_T         *drv_hal;
+    unsigned int                 num_of_intr;
+    CPMAC_ISR_INFO_T             cpmac_isr;
+    unsigned int                 link_speed;
+    unsigned int                 link_mode;
+    unsigned int                 enable_802_1q;
+    unsigned int                 timer_access_hal;
+    unsigned int                 loop_back;
+    CPMAC_RX_CHAN_INFO_T         *rx_chan_info;
+    CPMAC_TX_CHAN_INFO_T         *tx_chan_info;
+    CPMAC_ABILITY_INFO_T         *ability_info;
+    CPMAC_DEVICE_MIB_T           *device_mib;
+    CPMAC_DRV_STATS_T            *stats;
+    unsigned int                 flags;
+    unsigned int                 delay_ticks;
+    char                         mac_addr[6];
+    struct net_device_stats      net_dev_stats; 
+//    rwlock_t                     rw_lock;
+    int                          set_to_close;
+    struct net_device            *next_device;
+    unsigned int                 instance_num;
+    unsigned int                 non_data_irq_expected;
+    unsigned long                dev_size;
+    void*                        led_handle;
+} CPMAC_PRIVATE_INFO_T;
+
+
+/* Private flags */
+
+/* bit 0 to 31, bit 32 is used to indicate set or reset */
+
+#define IFF_PRIV_SHORT_FRAMES   0x00010000
+#define IFF_PRIV_JUMBO_FRAMES   0x00020000
+#define IFF_PRIV_AUTOSPEED      0x00080000
+#define IFF_PRIV_LINK10_HD      0x00100000
+#define IFF_PRIV_LINK10_FD      0x00200000
+#define IFF_PRIV_LINK100_HD     0x00400000
+#define IFF_PRIV_LINK100_FD     0x00800000
+#define IFF_PRIV_8021Q_EN       0x01000000
+#define IFF_PRIV_NUM_TX_CHAN    0x02000000
+#define IFF_PRIV_TX_FLOW_CNTL   0x04000000
+#define IFF_PRIV_RX_FLOW_CNTL   0x08000000
+#define IFF_PRIV_TX_PACING      0x10000000
+#define IFF_PRIV_RX_PASS_CRC    0x20000000
+
+#define PRIVCSFLAGS             0x200
+#define PRIVCGFLAGS             0x201
+
+
+#define BLOCKING      1
+#define CHAN_TEARDOWN 2
+#define CHAN_SETUP    4
+#define COMPLETE      8
+#define FREE_BUFFER   16
+
+
+static const char pszStats0[]            = "Stats0";
+static const char pszStats1[]            = "Stats1";
+static const char pszStats2[]            = "Stats2";
+static const char pszStats3[]            = "Stats3";
+static const char pszStats4[]            = "Stats4";
+static const char pszStatsDump[]         = "StatsDump";
+static const char pszStatsClear[]        = "StatsClear";
+static const char pszRX_PASS_CRC[]       = "RX_PASS_CRC";
+static const char pszRX_QOS_EN[]         = "RX_QOS_EN";
+static const char pszRX_NO_CHAIN[]       = "RX_NO_CHAIN";
+static const char pszRX_CMF_EN[]         = "RX_CMF_EN";
+static const char pszRX_CSF_EN[]         = "RX_CSF_EN";
+static const char pszRX_CEF_EN[]         = "RX_CEF_EN";
+static const char pszRX_CAF_EN[]         = "RX_CAF_EN";
+static const char pszRX_PROM_CH[]        = "RX_PROM_CH";
+static const char pszRX_BROAD_EN[]       = "RX_BROAD_EN";
+static const char pszRX_BROAD_CH[]       = "RX_BROAD_CH";
+static const char pszRX_MULT_EN[]        = "RX_MULT_EN";
+static const char pszRX_MULT_CH[]        = "RX_MULT_CH";
+static const char pszTX_PTYPE[]          = "TX_PTYPE";
+static const char pszTX_PACE[]           = "TX_PACE";
+static const char pszMII_EN[]            = "MII_EN";
+static const char pszTX_FLOW_EN[]        = "TX_FLOW_EN";
+static const char pszRX_FLOW_EN[]        = "RX_FLOW_EN";
+static const char pszRX_MAXLEN[]         = "RX_MAXLEN";
+static const char pszRX_FILTERLOWTHRESH[]   = "RX_FILTERLOWTHRESH";
+static const char pszRX0_FLOWTHRESH[]   = "RX0_FLOWTHRESH";
+static const char pszRX_UNICAST_SET[]    = "RX_UNICAST_SET";
+static const char pszRX_UNICAST_CLEAR[]  = "RX_UNICAST_CLEAR";
+static const char pszMdioConnect[]       = "MdioConnect";
+static const char pszMacAddr[]           = "MacAddr";
+static const char pszTick[]              = "Tick";
+static const char pszRX_MULTICAST[]      = "RX_MULTICAST";
+static const char pszRX_MULTI_ALL[]      = "RX_MULTI_ALL";
+static const char pszRX_MULTI_SINGLE[]   = "RX_MULTI_SINGLE";
+
+static const char pszSet[]               = "Set";
+static const char pszGet[]               = "Get";
+static const char pszClear[]             = "Clear";
+
+
+void *cpmac_hal_malloc_buffer(unsigned int size, void *MemBase, unsigned int MemRange,
+                              HAL_DEVICE *HalDev, HAL_RECEIVEINFO *HalReceiveInfo, 
+                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
+
+void cpmac_hal_tear_down_complete(OS_DEVICE*, int, int);
+int  cpmac_hal_control(OS_DEVICE *p_END_obj, const char *key, 
+                   const char *action, void *value);
+int  cpmac_hal_receive(OS_DEVICE *p_END_obj, FRAGLIST *fragList, 
+               unsigned int FragCount, unsigned int pkt_len, 
+               HAL_RECEIVEINFO *halReceiveInfo, 
+               unsigned int mode);
+int  cpmac_hal_send_complete(OS_SENDINFO*);
+
+void  cpmac_hal_isr(int irq, void *p_param, struct pt_regs *p_cb_param);
+void  cpmac_handle_tasklet(unsigned long data);
+
+inline static int cpmac_ci_strcmp(const char *s1, const char *s2)
+{
+    while(*s1 && *s2)
+    {
+        if(tolower(*s1) != tolower(*s2))
+            break;
+        s1++;
+        s2++;
+    }
+
+    return(tolower(*s1) - tolower(*s2));
+}
+
+#endif
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c
--- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.c	2005-07-12 02:48:42.044593000 +0200
@@ -0,0 +1,492 @@
+/******************************************************************************
+ * FILE PURPOSE:    CPMAC Net Driver HAL support Source
+ ******************************************************************************
+ * FILE NAME:       cpmacHalLx.c
+ *
+ * DESCRIPTION:     CPMAC Network Device Driver Source
+ *
+ * REVISION HISTORY:
+ *
+ * Date           Description                               Author
+ *-----------------------------------------------------------------------------
+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
+ * 18 Dec 2003    Updated for 5.7                           Suraj S Iyer
+ *
+ * (C) Copyright 2003, Texas Instruments, Inc
+ *******************************************************************************/
+#include <linux/kernel.h> 
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>     
+#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
+#include <asm/io.h>
+#include <linux/string.h>
+
+#include <asm/ar7/avalanche_intc.h>
+
+#include "cpmacHalLx.h"
+#include "cpmac.h"
+
+/* PSP config headers */
+#include "psp_config_parse.h"
+#include "psp_config_mgr.h"
+
+/* debug */                                 
+extern int cpmac_debug_mode;
+#define dbgPrint if (cpmac_debug_mode) printk
+#define errPrint printk
+
+char CpmacSignature[] = "Cpmac driver";
+static unsigned long irq_flags = 0;
+OS_SETUP *p_os_setup = NULL;
+
+extern int avalanche_request_intr_pacing(int, unsigned int, unsigned int);
+extern int avalanche_free_intr_pacing(unsigned int blk_num);
+
+/*----------------------------------------------------------------------------
+ * Parameter extracting functionalities.
+ *--------------------------------------------------------------------------*/
+static int os_find_parm_u_int(void *info_ptr, const char *param, unsigned int *val)
+{
+    int ret_val = 0;
+
+    if((ret_val = psp_config_get_param_uint(info_ptr, param, val)) == -1)
+    {
+        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+static int os_find_parm_val(void *info_ptr, const char *param, void *val)
+{
+    int ret_val = 0;
+
+    if(psp_config_get_param_string(info_ptr, param, val) == -1)
+    {
+        dbgPrint("Error: could not locate the requested \"%s\" param.\n",param);
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+static int os_find_device(int unit, const char *find_name, void *device_info)
+{
+    int ret_val = 0;
+
+    if(psp_config_get((char *)find_name, unit, device_info) == -1)
+    {
+        dbgPrint("Error: could not locate the requested \"%s\" param.\n", find_name);
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+/*---------------------------------------------------------------------------
+ * Memory related OS abstraction.
+ *--------------------------------------------------------------------------*/
+void os_free(void *mem_ptr)
+{
+    kfree(mem_ptr);
+}
+
+void  os_free_buffer(OS_RECEIVEINFO *osReceiveInfo, void *mem_ptr)
+{
+    dev_kfree_skb_any(osReceiveInfo);
+}
+
+void  os_free_dev(void *mem_ptr)
+{
+    kfree(mem_ptr);
+}
+
+void os_free_dma_xfer(void *mem_ptr)
+{
+    kfree(mem_ptr);
+}
+
+static void *os_malloc(unsigned int size)
+{
+    return(kmalloc(size, GFP_KERNEL));
+}
+
+static void *os_malloc_dma_xfer(unsigned int size, 
+                                void         *mem_base, 
+                                unsigned int mem_range)
+{
+    return(kmalloc(size, GFP_KERNEL));
+}
+
+static void *os_malloc_dev(unsigned int size)
+{
+    return(kmalloc(size, GFP_KERNEL));
+}
+
+
+/*----------------------------------------------------------------------------
+ * CRITICAL SECTION ENABLING/DISABLING.
+ *--------------------------------------------------------------------------*/
+static void os_critical_on(void)
+{
+    save_and_cli(irq_flags);
+}
+
+static void os_critical_off(void)
+{
+    restore_flags(irq_flags);
+}
+
+/*----------------------------------------------------------------------------
+ * Cache related abstraction
+ *--------------------------------------------------------------------------*/
+static void os_cache_invalidate(void *mem_ptr, int size)
+{
+    dma_cache_inv((unsigned long)mem_ptr, size);
+}
+
+static void os_cache_writeback(void *mem_ptr, int size)
+{
+    dma_cache_wback_inv((unsigned long)mem_ptr, size);
+}
+
+/*-----------------------------------------------------------------------------
+ * Support functions.
+ *---------------------------------------------------------------------------*/
+
+static void  hal_drv_unregister_isr(OS_DEVICE *p_dev, int intr)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
+    intr                                 = LNXINTNUM(intr);
+
+    free_irq(p_isr_cb_param->intr, p_isr_cb_param);
+
+    dbgPrint("cpmac_hal_unregister called for the intr %d for unit %x and isr_cb_param %x.\n", 
+             intr, p_cpmac_priv->instance_num, (unsigned int )&p_cpmac_priv->cpmac_isr);
+}
+
+
+static void hal_drv_register_isr(OS_DEVICE *p_dev, 
+                                 CPMAC_HAL_ISR_FUNC_T hal_isr, int intr)
+{
+    CPMAC_PRIVATE_INFO_T *p_cpmac_priv   = p_dev->priv;
+    CPMAC_DRV_HAL_INFO_T *p_drv_hal      = p_cpmac_priv->drv_hal;
+    CPMAC_ISR_INFO_T     *p_isr_cb_param = &p_cpmac_priv->cpmac_isr;
+    intr                                 = LNXINTNUM(intr);
+       
+    dbgPrint("osRegister called for the intr %d for device %x and p_isr_cb_param %x.\n", 
+             intr, (bit32u)p_dev, (bit32u)p_isr_cb_param);
+
+    p_isr_cb_param->owner       = p_drv_hal;
+    p_isr_cb_param->hal_isr     = hal_isr;
+    p_isr_cb_param->intr        = intr;
+
+    tasklet_init(&p_isr_cb_param->tasklet, cpmac_handle_tasklet, (unsigned long)p_isr_cb_param);
+    dbgPrint("Success in registering irq %d for Cpmac unit# %d.\n", intr, p_cpmac_priv->instance_num); 
+}
+
+/*---------------------------------------------------------------------------
+ * FUNCTIONS called by the CPMAC Net Device.
+ *-------------------------------------------------------------------------*/
+static int load_os_funcs(OS_FUNCTIONS *os_func)
+{
+    dbgPrint("os_init_module: Start\n"); 
+    if( os_func == 0 )
+    {
+        return(sizeof(OS_FUNCTIONS));   
+    }
+
+    os_func->Control                    = cpmac_hal_control;
+    os_func->CriticalOn                 = os_critical_on;
+    os_func->CriticalOff                = os_critical_off;
+    os_func->DataCacheHitInvalidate     = os_cache_invalidate;
+    os_func->DataCacheHitWriteback      = os_cache_writeback;       
+    os_func->DeviceFindInfo     = os_find_device;
+    os_func->DeviceFindParmUint = os_find_parm_u_int;
+    os_func->DeviceFindParmValue= os_find_parm_val;
+    os_func->Free               = os_free;
+    os_func->FreeRxBuffer       = os_free_buffer;
+    os_func->FreeDev            = os_free_dev;
+    os_func->FreeDmaXfer        = os_free_dma_xfer;
+    os_func->IsrRegister        = hal_drv_register_isr;
+    os_func->IsrUnRegister      = hal_drv_unregister_isr;
+    os_func->Malloc             = os_malloc;
+    os_func->MallocDev          = os_malloc_dev;
+    os_func->MallocDmaXfer      = os_malloc_dma_xfer;
+    os_func->MallocRxBuffer     = cpmac_hal_malloc_buffer;
+    os_func->Memset             = memset;
+    os_func->Printf             = printk;
+    os_func->Receive            = cpmac_hal_receive;
+    os_func->SendComplete       = cpmac_hal_send_complete;
+    os_func->Strcmpi            = cpmac_ci_strcmp;
+    os_func->TeardownComplete   = cpmac_hal_tear_down_complete;
+    os_func->Strstr             = strstr;
+    os_func->Strtoul            = simple_strtol;
+    os_func->Sprintf            = sprintf;
+    os_func->Strlen             = strlen;
+
+    dbgPrint("os_init_module: Leave\n");             
+  
+    return(0);
+}
+
+
+int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
+{
+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
+
+    return(p_hal_funcs->Init(p_hal_dev));
+}
+
+int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *p_drv_hal)
+{
+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
+
+    int              ret_val       = p_hal_funcs->Shutdown(p_hal_dev);
+
+#if 0
+    if(ret_val == 0)
+        kfree(p_hal_funcs);
+    else
+        ret_val = -1;
+#endif
+
+    kfree(p_drv_hal->os_funcs); 
+    
+    return (ret_val); 
+}
+
+int cpmac_drv_tx_setup(HAL_FUNCTIONS        *p_hal_funcs,
+                       HAL_DEVICE           *p_hal_dev,
+                       CPMAC_TX_CHAN_INFO_T *p_tx_chan_info)
+{
+    int ret_val = 0;
+    int count   = 0;
+    CHANNEL_INFO chan_info;
+
+    /* Let's setup the TX Channels. */
+    for(count=0; count < p_tx_chan_info->cfg_chan; count++)
+    {
+        chan_info.Channel        = count;
+        chan_info.Direction      = DIRECTION_TX;       
+        chan_info.TxNumBuffers   = p_tx_chan_info->chan[count].num_BD;
+        chan_info.TxServiceMax   = p_tx_chan_info->chan[count].service_max;
+        chan_info.TxNumQueues    = 0;
+        
+        if((ret_val = p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info,
+                                                NULL)) != 0)
+        {
+            errPrint("Error in opening channel %d for TX.\n", count);
+            ret_val = -1;
+            break;
+        }
+
+        p_tx_chan_info->opened_chan++;
+    }
+
+    return(ret_val);
+}
+
+int cpmac_drv_rx_setup(HAL_FUNCTIONS         *p_hal_funcs,
+                       HAL_DEVICE            *p_hal_dev,
+                       CPMAC_RX_CHAN_INFO_T  *p_rx_chan_info)
+{
+    int ret_val = 0;
+    CHANNEL_INFO chan_info;
+
+    chan_info.Channel       = 0;
+    chan_info.Direction     = DIRECTION_RX;
+    chan_info.RxBufSize     = p_rx_chan_info->chan[0].buffer_size;
+    chan_info.RxBufferOffset= p_rx_chan_info->chan[0].buffer_offset;
+    chan_info.RxNumBuffers  = p_rx_chan_info->chan[0].num_BD;
+    chan_info.RxServiceMax  = p_rx_chan_info->chan[0].service_max;
+
+    if(p_hal_funcs->ChannelSetup(p_hal_dev, &chan_info, p_rx_chan_info) != 0) 
+    {
+        errPrint("Error in opening channel %d for RX.\n", 0);
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *p_drv_hal,
+                    CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
+                    CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,
+                    unsigned int         flags)
+{
+    int ret_val = 0;
+    HAL_FUNCTIONS *p_hal_funcs = p_drv_hal->hal_funcs;
+    HAL_DEVICE    *p_hal_dev   = p_drv_hal->hal_dev;
+
+    dbgPrint("It is in cpmac_drv_start for %x.\n", (unsigned int)p_drv_hal);
+
+    if(flags & CHAN_SETUP)
+    {
+        if(cpmac_drv_tx_setup(p_hal_funcs, p_hal_dev, 
+                  p_tx_chan_info)!=0)
+        {
+            errPrint("Failed to set up tx channel(s).\n");
+            ret_val = -1;
+        }
+        else if(cpmac_drv_rx_setup(p_hal_funcs, p_hal_dev,
+                                   p_rx_chan_info)!=0)
+        {
+            errPrint("Failed to set up rx channel.\n");
+            ret_val = -1;
+        }
+        else
+        {
+            ret_val = 0;
+        }
+    }
+
+    /* Error in setting up the Channels, quit. */
+    if((ret_val == 0) && (ret_val = p_hal_funcs->Open(p_hal_dev)) != 0)
+    {
+        errPrint("failed to open the HAL!!!.\n");
+        ret_val = -1;
+    }
+
+    return (ret_val);
+} /* cpmac_drv_start */
+
+
+
+int cpmac_drv_tx_teardown(HAL_FUNCTIONS        *p_hal_funcs,
+                          HAL_DEVICE           *p_hal_dev,
+                          CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
+                          unsigned int         flags)
+{
+    int ret_val = 0;
+    int count   = 0;
+
+    /* Let's setup the TX Channels. */
+    for(;  p_tx_chan_info->opened_chan > 0; 
+        p_tx_chan_info->opened_chan--, count++)
+    {
+        if(p_hal_funcs->ChannelTeardown(p_hal_dev, count, flags) != 0)
+        {
+            errPrint("Error in tearing down channel %d for TX.\n", count);
+            ret_val = -1;
+            break;
+        }
+    }
+
+    return(ret_val);
+}
+
+
+int cpmac_drv_rx_teardown(HAL_FUNCTIONS *p_hal_funcs,
+                  HAL_DEVICE    *p_hal_dev,
+              unsigned int  flags)
+{
+    int ret_val = 0;
+
+    if(p_hal_funcs->ChannelTeardown(p_hal_dev, 0, flags) != 0) 
+    {
+        errPrint("Error in tearing down channel %d for RX.\n", 0);
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T    *p_drv_hal,
+                   CPMAC_TX_CHAN_INFO_T    *p_tx_chan_info,
+                   CPMAC_RX_CHAN_INFO_T    *p_rx_chan_info,
+                   unsigned int flags)
+{
+    HAL_DEVICE       *p_hal_dev    = p_drv_hal->hal_dev;
+    HAL_FUNCTIONS    *p_hal_funcs  = p_drv_hal->hal_funcs;
+    int ret_val                    = 0;
+
+    if(flags & CHAN_TEARDOWN)
+    {
+        unsigned int chan_flags = 0;
+
+        if(flags & FREE_BUFFER) chan_flags |= 0x4; /* full tear down */
+        if(flags & BLOCKING)    chan_flags |= 0x8; /* blocking call  */
+
+        dbgPrint("The teardown flags are %d.\n", flags);
+        dbgPrint("The teardown chan flags are %d.\n", chan_flags);
+
+        if(cpmac_drv_tx_teardown(p_hal_funcs, p_hal_dev, 
+                                 p_tx_chan_info, chan_flags | 0x1) != 0)
+        {
+            ret_val = -1;
+            errPrint("The tx channel teardown failed.\n");
+        }
+        else if(cpmac_drv_rx_teardown(p_hal_funcs, p_hal_dev, chan_flags | 0x2) != 0)
+        {
+            ret_val = -1;
+            errPrint("The rx channel teardown failed.\n");
+        }
+        else
+        {
+            ;
+        }
+    }
+
+    if(ret_val == 0)
+    {
+        int close_flags = 1;
+
+        if(flags & FREE_BUFFER)  close_flags = 2;
+//        if(flags & COMPLETE)     close_flags = 3;
+
+        if(p_hal_funcs->Close(p_hal_dev, close_flags) != 0)
+        {
+            ret_val = -1;
+        }
+    }
+        
+    return(ret_val);
+}
+
+int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T *p_drv_hal, OS_DEVICE *p_os_dev, int inst)
+{
+    int ret_val = -1;
+    int hal_func_size;
+
+    dbgPrint("Entering the CpmacInitModule for the inst %d \n", inst);
+
+    if((p_drv_hal->os_funcs = kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL)) == NULL)
+    {
+        errPrint("Failed to allocate memory for OS_FUNCTIONS.\n");
+    }
+    else if(load_os_funcs(p_drv_hal->os_funcs) != 0)
+    {
+        errPrint("Failed to load OS funcs.\n");
+        os_free(p_drv_hal->os_funcs);
+    }
+    else if(halCpmacInitModule(&p_drv_hal->hal_dev, p_os_dev,
+                               &p_drv_hal->hal_funcs, p_drv_hal->os_funcs, 
+                               sizeof(*p_drv_hal->os_funcs),
+                               &hal_func_size, inst) != 0)
+    {
+        errPrint("halCpmacInitModule failed for inst %d \n", inst);
+        os_free(p_drv_hal->os_funcs);
+    }
+    else if(p_drv_hal->hal_funcs->Probe(p_drv_hal->hal_dev) != 0)
+    {
+        errPrint("halCpmacProbe failed for inst %d \n", inst);       
+        os_free(p_drv_hal->os_funcs);
+    }
+    else
+    {
+        /* every thing went well. */
+        ret_val = 0;
+    }  
+
+    return (ret_val);  
+}
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h
--- linux.old/drivers/net/avalanche_cpmac/cpmacHalLx.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmacHalLx.h	2005-07-12 02:48:42.044593000 +0200
@@ -0,0 +1,51 @@
+/******************************************************************************
+ * FILE PURPOSE:    CPMAC Linux Device Driver HAL support Header
+ ******************************************************************************
+ * FILE NAME:       cpmacHalVx.h
+ *
+ * DESCRIPTION:     CPMAC Linux Device Driver Header
+ *
+ * REVISION HISTORY:
+ *
+ * Date           Description                               Author
+ *-----------------------------------------------------------------------------
+ * 27 Nov 2002    Initial Creation                          Suraj S Iyer  
+ * 09 Jun 2003    Updates for GA                            Suraj S Iyer
+ * 
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+#ifndef __CPMAC_HAL_LX_H
+#define __CPMAC_HAL_LX_H
+
+
+typedef struct net_device         OS_DEVICE;
+typedef struct sk_buff            OS_RECEIVEINFO;
+typedef struct sk_buff            OS_SENDINFO;
+
+#ifdef DEBUG
+typedef void                      HAL_RECEIVEINFO;
+typedef void                      HAL_DEVICE;
+typedef void                      OS_SETUP;
+#endif
+
+#define OS_SETUP   void
+#define HAL_DEVICE void
+#define HAL_RECEIVEINFO void
+
+#define _CPHAL_CPMAC
+ 
+#include "cpswhal_cpmac.h"
+#include "cpmac.h"
+
+int cpmac_drv_start(CPMAC_DRV_HAL_INFO_T *, CPMAC_TX_CHAN_INFO_T*,
+                    CPMAC_RX_CHAN_INFO_T *, unsigned int);
+int cpmac_drv_cleanup(CPMAC_DRV_HAL_INFO_T *);
+int cpmac_drv_init(CPMAC_DRV_HAL_INFO_T*);
+int cpmac_drv_close(CPMAC_DRV_HAL_INFO_T*);
+int cpmac_drv_open(CPMAC_DRV_HAL_INFO_T*);
+int cpmac_drv_init_module(CPMAC_DRV_HAL_INFO_T*, OS_DEVICE*, int);
+int cpmac_drv_stop(CPMAC_DRV_HAL_INFO_T *p_drv_hal,CPMAC_TX_CHAN_INFO_T *p_tx_chan_info,
+                   CPMAC_RX_CHAN_INFO_T *p_rx_chan_info,unsigned int flags);
+
+#endif
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h
--- linux.old/drivers/net/avalanche_cpmac/cpmac_reg.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmac_reg.h	2005-07-12 02:48:42.045593000 +0200
@@ -0,0 +1,406 @@
+/****************************************************************************
+        TNETD73xx Software Support
+        Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
+
+        FILE: cpmac_reg.h   Register definitions for the CPMAC module
+
+         DESCRIPTION:
+                This include file contains register definitions for the
+                CPMAC module.
+
+         HISTORY:
+              15Nov00 BEGR Original version written
+              30May02 MICK Added bits for Int Vector
+              19Sep02 MICK Added INT_ACK per Channel
+              08Nov02 GDUN Updated to use base
+              12Nov02 MICK Incorporated into CPHAL 
+*****************************************************************************/
+#ifndef _INC_CPMAC_REG
+#define _INC_CPMAC_REG
+
+#ifndef MEM_PTR
+#define MEM_PTR volatile bit32u *
+#endif
+
+/***************************************************************************
+ *                                                                         
+ *         C P M A C  M E M O R Y  M A P 
+ *                                                                         
+ **************************************************************************/
+
+#define pCPMAC_TX_IDVER(base)                 ((MEM_PTR)(base+0x000))
+#define  CPMAC_TX_IDVER(base)                 (*pCPMAC_TX_IDVER(base))
+#define pCPMAC_TX_CONTROL(base)               ((MEM_PTR)(base+0x004))
+#define  CPMAC_TX_CONTROL(base)               (*pCPMAC_TX_CONTROL(base))
+#define pCPMAC_TX_TEARDOWN(base)              ((MEM_PTR)(base+0x008))
+#define  CPMAC_TX_TEARDOWN(base)              (*pCPMAC_TX_TEARDOWN(base))
+#define pCPMAC_RX_IDVER(base)                 ((MEM_PTR)(base+0x010))
+#define  CPMAC_RX_IDVER(base)                 (*pCPMAC_RX_IDVER(base))
+#define pCPMAC_RX_CONTROL(base)               ((MEM_PTR)(base+0x014))
+#define  CPMAC_RX_CONTROL(base)               (*pCPMAC_RX_CONTROL(base))
+#define pCPMAC_RX_TEARDOWN(base)              ((MEM_PTR)(base+0x018))
+#define  CPMAC_RX_TEARDOWN(base)              (*pCPMAC_RX_TEARDOWN(base))
+#define pCPMAC_RX_MBP_ENABLE(base)            ((MEM_PTR)(base+0x100))
+#define  CPMAC_RX_MBP_ENABLE(base)            (*pCPMAC_RX_MBP_ENABLE(base))
+#define pCPMAC_RX_UNICAST_SET(base)           ((MEM_PTR)(base+0x104))
+#define  CPMAC_RX_UNICAST_SET(base)           (*pCPMAC_RX_UNICAST_SET(base))
+#define pCPMAC_RX_UNICAST_CLEAR(base)         ((MEM_PTR)(base+0x108))
+#define  CPMAC_RX_UNICAST_CLEAR(base)         (*pCPMAC_RX_UNICAST_CLEAR(base))
+#define pCPMAC_RX_MAXLEN(base)                ((MEM_PTR)(base+0x10C))
+#define  CPMAC_RX_MAXLEN(base)                (*pCPMAC_RX_MAXLEN(base))
+#define pCPMAC_RX_BUFFER_OFFSET(base)         ((MEM_PTR)(base+0x110))
+#define  CPMAC_RX_BUFFER_OFFSET(base)         (*pCPMAC_RX_BUFFER_OFFSET(base))
+#define pCPMAC_RX_FILTERLOWTHRESH(base)       ((MEM_PTR)(base+0x114))
+#define  CPMAC_RX_FILTERLOWTHRESH(base)       (*pCPMAC_RX_FILTERLOWTHRESH(base))
+#define pCPMAC_RX0_FLOWTHRESH(base)           ((MEM_PTR)(base+0x120))
+#define  CPMAC_RX0_FLOWTHRESH(base)           (*pCPMAC_RX0_FLOWTHRESH(base))
+#define pCPMAC_RX1_FLOWTHRESH(base)           ((MEM_PTR)(base+0x124))
+#define  CPMAC_RX1_FLOWTHRESH(base)           (*pCPMAC_RX1_FLOWTHRESH(base))
+#define pCPMAC_RX2_FLOWTHRESH(base)           ((MEM_PTR)(base+0x128))
+#define  CPMAC_RX2_FLOWTHRESH(base)           (*pCPMAC_RX2_FLOWTHRESH(base))
+#define pCPMAC_RX3_FLOWTHRESH(base)           ((MEM_PTR)(base+0x12C))
+#define  CPMAC_RX3_FLOWTHRESH(base)           (*pCPMAC_RX3_FLOWTHRESH(base))
+#define pCPMAC_RX4_FLOWTHRESH(base)           ((MEM_PTR)(base+0x130))
+#define  CPMAC_RX4_FLOWTHRESH(base)           (*pCPMAC_RX4_FLOWTHRESH(base))
+#define pCPMAC_RX5_FLOWTHRESH(base)           ((MEM_PTR)(base+0x134))
+#define  CPMAC_RX5_FLOWTHRESH(base)           (*pCPMAC_RX5_FLOWTHRESH(base))
+#define pCPMAC_RX6_FLOWTHRESH(base)           ((MEM_PTR)(base+0x138))
+#define  CPMAC_RX6_FLOWTHRESH(base)           (*pCPMAC_RX6_FLOWTHRESH(base))
+#define pCPMAC_RX7_FLOWTHRESH(base)           ((MEM_PTR)(base+0x13C))
+#define  CPMAC_RX7_FLOWTHRESH(base)           (*pCPMAC_RX7_FLOWTHRESH(base))
+#define pCPMAC_RX0_FREEBUFFER(base)           ((MEM_PTR)(base+0x140))
+#define  CPMAC_RX0_FREEBUFFER(base)           (*pCPMAC_RX0_FREEBUFFER(base))
+#define pCPMAC_RX1_FREEBUFFER(base)           ((MEM_PTR)(base+0x144))
+#define  CPMAC_RX1_FREEBUFFER(base)           (*pCPMAC_RX1_FREEBUFFER(base))
+#define pCPMAC_RX2_FREEBUFFER(base)           ((MEM_PTR)(base+0x148))
+#define  CPMAC_RX2_FREEBUFFER(base)           (*pCPMAC_RX2_FREEBUFFER(base))
+#define pCPMAC_RX3_FREEBUFFER(base)           ((MEM_PTR)(base+0x14C))
+#define  CPMAC_RX3_FREEBUFFER(base)           (*pCPMAC_RX3_FREEBUFFER(base))
+#define pCPMAC_RX4_FREEBUFFER(base)           ((MEM_PTR)(base+0x150))
+#define  CPMAC_RX4_FREEBUFFER(base)           (*pCPMAC_RX4_FREEBUFFER(base))
+#define pCPMAC_RX5_FREEBUFFER(base)           ((MEM_PTR)(base+0x154))
+#define  CPMAC_RX5_FREEBUFFER(base)           (*pCPMAC_RX5_FREEBUFFER(base))
+#define pCPMAC_RX6_FREEBUFFER(base)           ((MEM_PTR)(base+0x158))
+#define  CPMAC_RX6_FREEBUFFER(base)           (*pCPMAC_RX6_FREEBUFFER(base))
+#define pCPMAC_RX7_FREEBUFFER(base)           ((MEM_PTR)(base+0x15C))
+#define  CPMAC_RX7_FREEBUFFER(base)           (*pCPMAC_RX7_FREEBUFFER(base))
+#define pCPMAC_MACCONTROL(base)               ((MEM_PTR)(base+0x160))
+#define  CPMAC_MACCONTROL(base)               (*pCPMAC_MACCONTROL(base))
+#define pCPMAC_MACSTATUS(base)                ((MEM_PTR)(base+0x164))
+#define  CPMAC_MACSTATUS(base)                (*pCPMAC_MACSTATUS(base))
+#define pCPMAC_EMCONTROL(base)                ((MEM_PTR)(base+0x168))
+#define  CPMAC_EMCONTROL(base)                (*pCPMAC_EMCONTROL(base))
+#define pCPMAC_TX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x170))
+#define  CPMAC_TX_INTSTAT_RAW(base)           (*pCPMAC_TX_INTSTAT_RAW(base))
+#define pCPMAC_TX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x174))
+#define  CPMAC_TX_INTSTAT_MASKED(base)        (*pCPMAC_TX_INTSTAT_MASKED(base))
+#define pCPMAC_TX_INTMASK_SET(base)           ((MEM_PTR)(base+0x178))
+#define  CPMAC_TX_INTMASK_SET(base)           (*pCPMAC_TX_INTMASK_SET(base))
+#define pCPMAC_TX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x17C))
+#define  CPMAC_TX_INTMASK_CLEAR(base)         (*pCPMAC_TX_INTMASK_CLEAR(base))
+#define pCPMAC_MAC_IN_VECTOR(base)            ((MEM_PTR)(base+0x180))
+#define  CPMAC_MAC_IN_VECTOR(base)            (*pCPMAC_MAC_IN_VECTOR(base))
+#define pCPMAC_MAC_EOI_VECTOR(base)           ((MEM_PTR)(base+0x184))
+#define  CPMAC_MAC_EOI_VECTOR(base)           (*pCPMAC_MAC_EOI_VECTOR(base))
+#define pCPMAC_RX_INTSTAT_RAW(base)           ((MEM_PTR)(base+0x190))
+#define  CPMAC_RX_INTSTAT_RAW(base)           (*pCPMAC_RX_INTSTAT_RAW(base))
+#define pCPMAC_RX_INTSTAT_MASKED(base)        ((MEM_PTR)(base+0x194))
+#define  CPMAC_RX_INTSTAT_MASKED(base)        (*pCPMAC_RX_INTSTAT_MASKED(base))
+#define pCPMAC_RX_INTMASK_SET(base)           ((MEM_PTR)(base+0x198))
+#define  CPMAC_RX_INTMASK_SET(base)           (*pCPMAC_RX_INTMASK_SET(base))
+#define pCPMAC_RX_INTMASK_CLEAR(base)         ((MEM_PTR)(base+0x19C))
+#define  CPMAC_RX_INTMASK_CLEAR(base)         (*pCPMAC_RX_INTMASK_CLEAR(base))
+#define pCPMAC_MAC_INTSTAT_RAW(base)          ((MEM_PTR)(base+0x1A0))
+#define  CPMAC_MAC_INTSTAT_RAW(base)          (*pCPMAC_MAC_INTSTAT_RAW(base))
+#define pCPMAC_MAC_INTSTAT_MASKED(base)       ((MEM_PTR)(base+0x1A4))
+#define  CPMAC_MAC_INTSTAT_MASKED(base)       (*pCPMAC_MAC_INTSTAT_MASKED(base))
+#define pCPMAC_MAC_INTMASK_SET(base)          ((MEM_PTR)(base+0x1A8))
+#define  CPMAC_MAC_INTMASK_SET(base)          (*pCPMAC_MAC_INTMASK_SET(base))
+#define pCPMAC_MAC_INTMASK_CLEAR(base)        ((MEM_PTR)(base+0x1AC))
+#define  CPMAC_MAC_INTMASK_CLEAR(base)        (*pCPMAC_MAC_INTMASK_CLEAR(base))
+#define pCPMAC_MACADDRLO_0(base)              ((MEM_PTR)(base+0x1B0))
+#define  CPMAC_MACADDRLO_0(base)              (*pCPMAC_MACADDRLO_0(base))
+#define pCPMAC_MACADDRLO_1(base)              ((MEM_PTR)(base+0x1B4))
+#define  CPMAC_MACADDRLO_1(base)              (*pCPMAC_MACADDRLO_1(base))
+#define pCPMAC_MACADDRLO_2(base)              ((MEM_PTR)(base+0x1B8))
+#define  CPMAC_MACADDRLO_2(base)              (*pCPMAC_MACADDRLO_2(base))
+#define pCPMAC_MACADDRLO_3(base)              ((MEM_PTR)(base+0x1BC))
+#define  CPMAC_MACADDRLO_3(base)              (*pCPMAC_MACADDRLO_3(base))
+#define pCPMAC_MACADDRLO_4(base)              ((MEM_PTR)(base+0x1C0))
+#define  CPMAC_MACADDRLO_4(base)              (*pCPMAC_MACADDRLO_4(base))
+#define pCPMAC_MACADDRLO_5(base)              ((MEM_PTR)(base+0x1C4))
+#define  CPMAC_MACADDRLO_5(base)              (*pCPMAC_MACADDRLO_5(base))
+#define pCPMAC_MACADDRLO_6(base)              ((MEM_PTR)(base+0x1C8))
+#define  CPMAC_MACADDRLO_6(base)              (*pCPMAC_MACADDRLO_6(base))
+#define pCPMAC_MACADDRLO_7(base)              ((MEM_PTR)(base+0x1CC))
+#define  CPMAC_MACADDRLO_7(base)              (*pCPMAC_MACADDRLO_7(base))
+#define pCPMAC_MACADDRMID(base)               ((MEM_PTR)(base+0x1D0))
+#define  CPMAC_MACADDRMID(base)               (*pCPMAC_MACADDRMID(base))
+#define pCPMAC_MACADDRHI(base)                ((MEM_PTR)(base+0x1D4))
+#define  CPMAC_MACADDRHI(base)                (*pCPMAC_MACADDRHI(base))
+#define pCPMAC_MACHASH1(base)                 ((MEM_PTR)(base+0x1D8))
+#define  CPMAC_MACHASH1(base)                 (*pCPMAC_MACHASH1(base))
+#define pCPMAC_MACHASH2(base)                 ((MEM_PTR)(base+0x1DC))
+#define  CPMAC_MACHASH2(base)                 (*pCPMAC_MACHASH2(base))
+#define pCPMAC_BOFFTEST(base)                 ((MEM_PTR)(base+0x1E0))
+#define  CPMAC_BOFFTEST(base)                 (*pCPMAC_BOFFTEST(base))
+#define pCPMAC_PACTEST(base)                  ((MEM_PTR)(base+0x1E4))
+#define  CPMAC_PACTEST(base)                  (*pCPMAC_PACTEST(base))
+#define pCPMAC_RXPAUSE(base)                  ((MEM_PTR)(base+0x1E8))
+#define  CPMAC_RXPAUSE(base)                  (*pCPMAC_RXPAUSE(base))
+#define pCPMAC_TXPAUSE(base)                  ((MEM_PTR)(base+0x1EC))
+#define  CPMAC_TXPAUSE(base)                  (*pCPMAC_TXPAUSE(base))
+/* STATISTICS */
+#define pCPMAC_RXGOODFRAMES(base)             ((MEM_PTR)(base+0x200))
+#define  CPMAC_RXGOODFRAMES(base)             (*pCPMAC_RXGOODFRAMES(base))
+#define pCPMAC_RXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x204))
+#define  CPMAC_RXBROADCASTFRAMES(base)        (*pCPMAC_RXBROADCASTFRAMES(base))
+#define pCPMAC_RXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x208))
+#define  CPMAC_RXMULTICASTFRAMES(base)        (*pCPMAC_RXMULTICASTFRAMES(base))
+#define pCPMAC_RXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x20C))
+#define   CPMAC_RXPAUSEFRAMES(base)           (*pCPMAC_RXPAUSEFRAMES(base))
+#define pCPMAC_RXCRCERRORS(base)              ((MEM_PTR)(base+0x210))
+#define   CPMAC_RXCRCERRORS(base)             (*pCPMAC_RXCRCERRORS(base))
+#define pCPMAC_RXALIGNCODEERRORS(base)        ((MEM_PTR)(base+0x214))
+#define   CPMAC_RXALIGNCODEERRORS(base)       (*pCPMAC_RXALIGNCODEERRORS(base))
+#define pCPMAC_RXOVERSIZEDFRAMES(base)        ((MEM_PTR)(base+0x218))
+#define   CPMAC_RXOVERSIZEDFRAMES(base)       (*pCPMAC_RXOVERSIZEDFRAMES(base))
+#define pCPMAC_RXJABBERFRAMES(base)           ((MEM_PTR)(base+0x21C))
+#define  CPMAC_RXJABBERFRAMES(base)           (*pCPMAC_RXJABBERFRAMES(base))
+#define pCPMAC_RXUNDERSIZEDFRAMES(base)       ((MEM_PTR)(base+0x220))
+#define  CPMAC_RXUNDERSIZEDFRAMES(base)       (*pCPMAC_RXUNDERSIZEDFRAMES(base))
+#define pCPMAC_RXFRAGMENTS(base)              ((MEM_PTR)(base+0x224))
+#define  CPMAC_RXFRAGMENTS(base)              (*pCPMAC_RXFRAGMENTS(base))
+#define pCPMAC_RXFILTEREDFRAMES(base)         ((MEM_PTR)(base+0x228))
+#define  CPMAC_RXFILTEREDFRAMES(base)         (*pCPMAC_RXFILTEREDFRAMES(base))
+#define pCPMAC_RXQOSFILTEREDFRAMES(base)      ((MEM_PTR)(base+0x22C))
+#define  CPMAC_RXQOSFILTEREDFRAMES(base)      (*pCPMAC_RXQOSFILTEREDFRAMES(base))
+#define pCPMAC_RXOCTETS(base)                 ((MEM_PTR)(base+0x230))
+#define  CPMAC_RXOCTETS(base)                 (*pCPMAC_RXOCTETS(base))
+#define pCPMAC_TXGOODFRAMES(base)             ((MEM_PTR)(base+0x234))
+#define  CPMAC_TXGOODFRAMES(base)             (*pCPMAC_TXGOODFRAMES(base))
+#define pCPMAC_TXBROADCASTFRAMES(base)        ((MEM_PTR)(base+0x238))
+#define  CPMAC_TXBROADCASTFRAMES(base)        (*pCPMAC_TXBROADCASTFRAMES(base))
+#define pCPMAC_TXMULTICASTFRAMES(base)        ((MEM_PTR)(base+0x23C))
+#define  CPMAC_TXMULTICASTFRAMES(base)        (*pCPMAC_TXMULTICASTFRAMES(base))
+#define pCPMAC_TXPAUSEFRAMES(base)            ((MEM_PTR)(base+0x240))
+#define  CPMAC_TXPAUSEFRAMES(base)            (*pCPMAC_TXPAUSEFRAMES(base))
+#define pCPMAC_TXDEFERREDFRAMES(base)         ((MEM_PTR)(base+0x244))
+#define  CPMAC_TXDEFERREDFRAMES(base)         (*pCPMAC_TXDEFERREDFRAMES(base))
+#define pCPMAC_TXCOLLISIONFRAMES(base)        ((MEM_PTR)(base+0x248))
+#define  CPMAC_TXCOLLISIONFRAMES(base)        (*pCPMAC_TXCOLLISIONFRAMES(base))
+#define pCPMAC_TXSINGLECOLLFRAMES(base)       ((MEM_PTR)(base+0x24C))
+#define  CPMAC_TXSINGLECOLLFRAMES(base)       (*pCPMAC_TXSINGLECOLLFRAMES(base))
+#define pCPMAC_TXMULTCOLLFRAMES(base)         ((MEM_PTR)(base+0x250))
+#define  CPMAC_TXMULTCOLLFRAMES(base)         (*pCPMAC_TXMULTCOLLFRAMES(base))
+#define pCPMAC_TXEXCESSIVECOLLISIONS(base)    ((MEM_PTR)(base+0x254))
+#define  CPMAC_TXEXCESSIVECOLLISIONS(base)    (*pCPMAC_TXEXCESSIVECOLLISIONS(base))
+#define pCPMAC_TXLATECOLLISIONS(base)         ((MEM_PTR)(base+0x258))
+#define  CPMAC_TXLATECOLLISIONS(base)         (*pCPMAC_TXLATECOLLISIONS(base))
+#define pCPMAC_TXUNDERRUN(base)               ((MEM_PTR)(base+0x25C))
+#define  CPMAC_TXUNDERRUN(base)               (*pCPMAC_TXUNDERRUN(base))
+#define pCPMAC_TXCARRIERSENSEERRORS(base)     ((MEM_PTR)(base+0x260))
+#define  CPMAC_TXCARRIERSENSEERRORS(base)     (*pCPMAC_TXCARRIERSENSEERRORS(base))
+#define pCPMAC_TXOCTETS(base)                 ((MEM_PTR)(base+0x264))
+#define  CPMAC_TXOCTETS(base)                 (*pCPMAC_TXOCTETS(base))
+#define pCPMAC_64OCTETFRAMES(base)            ((MEM_PTR)(base+0x268))
+#define  CPMAC_64OCTETFRAMES(base)            (*pCPMAC_64OCTETFRAMES(base))
+#define pCPMAC_65T127OCTETFRAMES(base)        ((MEM_PTR)(base+0x26C))
+#define  CPMAC_65T127OCTETFRAMES(base)        (*pCPMAC_65T127OCTETFRAMES(base))
+#define pCPMAC_128T255OCTETFRAMES(base)       ((MEM_PTR)(base+0x270))
+#define  CPMAC_128T255OCTETFRAMES(base)       (*pCPMAC_128T255OCTETFRAMES(base))
+#define pCPMAC_256T511OCTETFRAMES(base)       ((MEM_PTR)(base+0x274))
+#define  CPMAC_256T511OCTETFRAMES(base)       (*pCPMAC_256T511OCTETFRAMES(base))
+#define pCPMAC_512T1023OCTETFRAMES(base)      ((MEM_PTR)(base+0x278))
+#define  CPMAC_512T1023OCTETFRAMES(base)      (*pCPMAC_512T1023OCTETFRAMES(base))
+#define pCPMAC_1024TUPOCTETFRAMES(base)       ((MEM_PTR)(base+0x27C))
+#define  CPMAC_1024TUPOCTETFRAMES(base)       (*pCPMAC_1024TUPOCTETFRAMES(base))
+#define pCPMAC_NETOCTETS(base)                ((MEM_PTR)(base+0x280))
+#define  CPMAC_NETOCTETS(base)                (*pCPMAC_NETOCTETS(base))
+#define pCPMAC_RXSOFOVERRUNS(base)            ((MEM_PTR)(base+0x284))
+#define  CPMAC_RXSOFOVERRUNS(base)            (*pCPMAC_RXSOFOVERRUNS(base))
+#define pCPMAC_RXMOFOVERRUNS(base)            ((MEM_PTR)(base+0x288))
+#define  CPMAC_RXMOFOVERRUNS(base)            (*pCPMAC_RXMOFOVERRUNS(base))
+#define pCPMAC_RXDMAOVERRUNS(base)            ((MEM_PTR)(base+0x28C))
+#define  CPMAC_RXDMAOVERRUNS(base)            (*pCPMAC_RXDMAOVERRUNS(base))
+
+#define  CPMAC_TX_HDP(base,ch)                (*(MEM_PTR)(base+0x600+(4*ch)))
+#define pCPMAC_TX0_HDP(base)                  ((MEM_PTR)(base+0x600))
+#define  CPMAC_TX0_HDP(base)                  (*pCPMAC_TX0_HDP(base))
+#define pCPMAC_TX1_HDP(base)                  ((MEM_PTR)(base+0x604))
+#define  CPMAC_TX1_HDP(base)                  (*pCPMAC_TX1_HDP(base))
+#define pCPMAC_TX2_HDP(base)                  ((MEM_PTR)(base+0x608))
+#define  CPMAC_TX2_HDP(base)                  (*pCPMAC_TX2_HDP(base))
+#define pCPMAC_TX3_HDP(base)                  ((MEM_PTR)(base+0x60C))
+#define  CPMAC_TX3_HDP(base)                  (*pCPMAC_TX3_HDP(base))
+#define pCPMAC_TX4_HDP(base)                  ((MEM_PTR)(base+0x610))
+#define  CPMAC_TX4_HDP(base)                  (*pCPMAC_TX4_HDP(base))
+#define pCPMAC_TX5_HDP(base)                  ((MEM_PTR)(base+0x614))
+#define  CPMAC_TX5_HDP(base)                  (*pCPMAC_TX5_HDP(base))
+#define pCPMAC_TX6_HDP(base)                  ((MEM_PTR)(base+0x618))
+#define  CPMAC_TX6_HDP(base)                  (*pCPMAC_TX6_HDP(base))
+#define pCPMAC_TX7_HDP(base)                  ((MEM_PTR)(base+0x61C))
+#define  CPMAC_TX7_HDP(base)                  (*pCPMAC_TX7_HDP(base))
+#define  CPMAC_RX_HDP(base,ch)                (*(MEM_PTR)(base+0x620+(4*ch)))
+#define pCPMAC_RX0_HDP(base)                  ((MEM_PTR)(base+0x620))
+#define  CPMAC_RX0_HDP(base)                  (*pCPMAC_RX0_HDP(base))
+#define pCPMAC_RX1_HDP(base)                  ((MEM_PTR)(base+0x624))
+#define  CPMAC_RX1_HDP(base)                  (*pCPMAC_RX1_HDP(base))
+#define pCPMAC_RX2_HDP(base)                  ((MEM_PTR)(base+0x628))
+#define  CPMAC_RX2_HDP(base)                  (*pCPMAC_RX2_HDP(base))
+#define pCPMAC_RX3_HDP(base)                  ((MEM_PTR)(base+0x62C))
+#define  CPMAC_RX3_HDP(base)                  (*pCPMAC_RX3_HDP(base))
+#define pCPMAC_RX4_HDP(base)                  ((MEM_PTR)(base+0x630))
+#define  CPMAC_RX4_HDP(base)                  (*pCPMAC_RX4_HDP(base))
+#define pCPMAC_RX5_HDP(base)                  ((MEM_PTR)(base+0x634))
+#define  CPMAC_RX5_HDP(base)                  (*pCPMAC_RX5_HDP(base))
+#define pCPMAC_RX6_HDP(base)                  ((MEM_PTR)(base+0x638))
+#define  CPMAC_RX6_HDP(base)                  (*pCPMAC_RX6_HDP(base))
+#define pCPMAC_RX7_HDP(base)                  ((MEM_PTR)(base+0x63C))
+#define  CPMAC_RX7_HDP(base)                  (*pCPMAC_RX7_HDP(base))
+
+
+#define CPMAC_TX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x640+(4*ch)))
+
+#define pCPMAC_TX0_INT_ACK(base)              ((MEM_PTR)(base+0x640))
+#define  CPMAC_TX0_INT_ACK(base)              (*pCPMAC_TX0_INT_ACK(base))
+#define pCPMAC_TX1_INT_ACK(base)              ((MEM_PTR)(base+0x644))
+#define  CPMAC_TX1_INT_ACK(base)              (*pCPMAC_TX1_INT_ACK(base))
+#define pCPMAC_TX2_INT_ACK(base)              ((MEM_PTR)(base+0x648))
+#define  CPMAC_TX2_INT_ACK(base)              (*pCPMAC_TX2_INT_ACK(base))
+#define pCPMAC_TX3_INT_ACK(base)              ((MEM_PTR)(base+0x64C))
+#define  CPMAC_TX3_INT_ACK(base)              (*pCPMAC_TX3_INT_ACK(base))
+#define pCPMAC_TX4_INT_ACK(base)              ((MEM_PTR)(base+0x650))
+#define  CPMAC_TX4_INT_ACK(base)              (*pCPMAC_TX4_INT_ACK(base))
+#define pCPMAC_TX5_INT_ACK(base)              ((MEM_PTR)(base+0x654))
+#define  CPMAC_TX5_INT_ACK(base)              (*pCPMAC_TX5_INT_ACK(base))
+#define pCPMAC_TX6_INT_ACK(base)              ((MEM_PTR)(base+0x658))
+#define  CPMAC_TX6_INT_ACK(base)              (*pCPMAC_TX6_INT_ACK(base))
+#define pCPMAC_TX7_INT_ACK(base)              ((MEM_PTR)(base+0x65C))
+#define  CPMAC_TX7_INT_ACK(base)              (*pCPMAC_TX7_INT_ACK(base))
+#define CPMAC_RX_INT_ACK(base,ch)             (*(MEM_PTR)(base+0x660+(4*ch)))
+         
+#define pCPMAC_RX0_INT_ACK(base)              ((MEM_PTR)(base+0x660))
+#define  CPMAC_RX0_INT_ACK(base)              (*pCPMAC_RX0_INT_ACK(base))
+#define pCPMAC_RX1_INT_ACK(base)              ((MEM_PTR)(base+0x664))
+#define  CPMAC_RX1_INT_ACK(base)              (*pCPMAC_RX1_INT_ACK(base))
+#define pCPMAC_RX2_INT_ACK(base)              ((MEM_PTR)(base+0x668))
+#define  CPMAC_RX2_INT_ACK(base)              (*pCPMAC_RX2_INT_ACK(base))
+#define pCPMAC_RX3_INT_ACK(base)              ((MEM_PTR)(base+0x66C))
+#define  CPMAC_RX3_INT_ACK(base)              (*pCPMAC_RX3_INT_ACK(base))
+#define pCPMAC_RX4_INT_ACK(base)              ((MEM_PTR)(base+0x670))
+#define  CPMAC_RX4_INT_ACK(base)              (*pCPMAC_RX4_INT_ACK(base))
+#define pCPMAC_RX5_INT_ACK(base)              ((MEM_PTR)(base+0x674))
+#define  CPMAC_RX5_INT_ACK(base)              (*pCPMAC_RX5_INT_ACK(base))
+#define pCPMAC_RX6_INT_ACK(base)              ((MEM_PTR)(base+0x678))
+#define  CPMAC_RX6_INT_ACK(base)              (*pCPMAC_RX6_INT_ACK(base))
+#define pCPMAC_RX7_INT_ACK(base)              ((MEM_PTR)(base+0x67C))
+#define  CPMAC_RX7_INT_ACK(base)              (*pCPMAC_RX7_INT_ACK(base))
+
+/****************************************************************************/
+/*                                                                          */
+/*         R E G I S T E R  B I T  D E F I N I T I O N S                    */
+/*                                                                          */
+/****************************************************************************/
+
+/* TX_CONTROL */
+
+#define TX_EN               (1 << 0)
+
+/* RX_CONTROL */
+
+#define RX_EN               (1 << 0)
+
+/* RX_MBP_ENABLE */
+
+#define RX_PASS_CRC         (1 << 30)
+#define RX_QOS_EN           (1 << 29)
+#define RX_NO_CHAIN         (1 << 28)
+
+#define RX_CMF_EN           (1 << 24)
+#define RX_CSF_EN           (1 << 23)
+#define RX_CEF_EN           (1 << 22)
+#define RX_CAF_EN           (1 << 21)
+
+#define RX_PROM_CH(n)       (n << 16)
+#define RX_PROM_CH_MASK     RX_PROM_CH(7)
+#define RX_PROM_CH_7        RX_PROM_CH(7)
+#define RX_PROM_CH_6        RX_PROM_CH(6)
+#define RX_PROM_CH_5        RX_PROM_CH(5)
+#define RX_PROM_CH_4        RX_PROM_CH(4)
+#define RX_PROM_CH_3        RX_PROM_CH(3)
+#define RX_PROM_CH_2        RX_PROM_CH(2)
+#define RX_PROM_CH_1        RX_PROM_CH(1)
+#define RX_PROM_CH_0        RX_PROM_CH(0)
+
+#define RX_BROAD_EN         (1 << 13)
+
+#define RX_BROAD_CH(n)       (n <<  8)
+#define RX_BROAD_CH_MASK     RX_BROAD_CH(7)
+#define RX_BROAD_CH_7        RX_BROAD_CH(7)
+#define RX_BROAD_CH_6        RX_BROAD_CH(6)
+#define RX_BROAD_CH_5        RX_BROAD_CH(5)
+#define RX_BROAD_CH_4        RX_BROAD_CH(4)
+#define RX_BROAD_CH_3        RX_BROAD_CH(3)
+#define RX_BROAD_CH_2        RX_BROAD_CH(2)
+#define RX_BROAD_CH_1        RX_BROAD_CH(1)
+#define RX_BROAD_CH_0        RX_BROAD_CH(0)
+
+#define RX_MULT_EN          (1 <<  5)
+
+#define RX_MULT_CH(n)       (n << 0)
+#define RX_MULT_CH_MASK     RX_MULT_CH(7)
+#define RX_MULT_CH_7        RX_MULT_CH(7)
+#define RX_MULT_CH_6        RX_MULT_CH(6)
+#define RX_MULT_CH_5        RX_MULT_CH(5)
+#define RX_MULT_CH_4        RX_MULT_CH(4)
+#define RX_MULT_CH_3        RX_MULT_CH(3)
+#define RX_MULT_CH_2        RX_MULT_CH(2)
+#define RX_MULT_CH_1        RX_MULT_CH(1)
+#define RX_MULT_CH_0        RX_MULT_CH(0)
+
+
+
+/* RX_UNICAST_SET */
+
+#define RX_CH7_EN        (1 <<  7)
+#define RX_CH6_EN        (1 <<  6)
+#define RX_CH5_EN        (1 <<  5)
+#define RX_CH4_EN        (1 <<  4)
+#define RX_CH3_EN        (1 <<  3)
+#define RX_CH2_EN        (1 <<  2)
+#define RX_CH1_EN        (1 <<  1)
+#define RX_CH0_EN        (1 <<  0)
+
+
+
+/*  MAC control */
+#define TX_PTYPE         (1 << 9)
+#define TX_PACE          (1 << 6)
+#define MII_EN           (1 << 5)
+#define TX_FLOW_EN       (1 << 4)
+#define RX_FLOW_EN       (1 << 3)
+#define MTEST            (1 << 2)
+#define CTRL_LOOPBACK    (1 << 1)
+#define FULLDUPLEX       (1 << 0)
+
+
+/* IntVec definitions  */
+#define MAC_IN_VECTOR_STATUS_INT   (1 << 19)
+#define MAC_IN_VECTOR_HOST_INT     (1 << 18)
+#define MAC_IN_VECTOR_RX_INT_OR    (1 << 17)
+#define MAC_IN_VECTOR_TX_INT_OR    (1 << 16)
+#define MAC_IN_VECTOR_RX_INT_VEC   (7 << 8)
+#define MAC_IN_VECTOR_TX_INT_VEC   (7)  
+
+
+/*  MacStatus */
+
+#define TX_HOST_ERR_CODE         (0xF << 20)
+#define TX_ERR_CH                (0x7 << 16)
+#define RX_HOST_ERR_CODE         (0xF << 12)
+#define RX_ERR_CH                (0x7 <<  8)
+#define RX_QOS_ACT               (1 << 2)
+#define RX_FLOW_ACT              (1 << 1)
+#define TX_FLOW_ACT              (1 << 0)
+#endif _INC_CPMAC_REG
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.c linux.dev/drivers/net/avalanche_cpmac/cpmdio.c
--- linux.old/drivers/net/avalanche_cpmac/cpmdio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.c	2005-07-12 02:48:42.046593000 +0200
@@ -0,0 +1,960 @@
+/***************************************************************************
+**  TNETD53xx Software Support
+**  Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
+**
+**  FILE: cpmdio.c
+**
+**  DESCRIPTION:
+**   MDIO Polling State Machine API. Functions will enable mii-Phy
+**   negotiation.
+**
+**  HISTORY:
+**    01Jan01 Denis, Bill      Original
+**      27Mar02 Michael Hanrahan (modified from emacmdio.c)
+**      07May02 Michael Hanrahan replaced clockwait for code delay
+**      10Jul02 Michael Hanrahan more debug, if fallback link is selected
+*****************************************************************************/
+#define __CPHAL_CPMDIO
+
+#include "mdio_reg.h"
+
+#ifdef _CPHAL_CPMAC
+#define mdioPrintf PhyDev->HalDev->OsFunc->Printf
+#else
+#define mdioPrintf printf
+#endif
+
+typedef struct _phy_device
+{
+   bit32u miibase;
+   bit32u inst;
+   bit32u PhyState;
+   bit32u MdixMask;
+   bit32u PhyMask;
+   bit32u MLinkMask;
+   bit32u PhyMode;
+#ifdef _CPHAL_CPMAC
+   HAL_DEVICE *HalDev;
+#endif
+} _PHY_DEVICE;
+
+static void   _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait);
+static void   _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev);
+static void   _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data);
+static bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr);
+static void   _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data);
+
+static void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
+static void _mdioPhyTimeOut(PHY_DEVICE *PhyDev);
+static void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum);
+
+static void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p);
+static void _mdioDumpState(PHY_DEVICE *PhyDev);
+
+/* Auto Mdix */
+static void _mdioMdixDelay(PHY_DEVICE *PhyDev);
+static int  _mdioMdixSupported(PHY_DEVICE *PhyDev);
+
+static void _MdioDefaultState  (PHY_DEVICE *PhyDev);
+static void _MdioFindingState  (PHY_DEVICE *PhyDev);
+static void _MdioFoundState    (PHY_DEVICE *PhyDev);
+static void _MdioInitState     (PHY_DEVICE *PhyDev);
+static void _MdioLinkedState   (PHY_DEVICE *PhyDev);
+static void _MdioLinkWaitState (PHY_DEVICE *PhyDev);
+static void _MdioLoopbackState (PHY_DEVICE *PhyDev);
+static void _MdioNwayStartState(PHY_DEVICE *PhyDev);
+static void _MdioNwayWaitState (PHY_DEVICE *PhyDev);
+
+
+
+#ifndef TRUE
+#define TRUE (1==1)
+#endif
+
+#ifndef FALSE
+#define FALSE (1==2)
+#endif
+
+#define PHY_NOT_FOUND  0xFFFF    /*  Used in Phy Detection */
+
+/*PhyState breakout                                                          */
+
+#define PHY_DEV_OFFSET      (0)
+#define PHY_DEV_SIZE        (5)        /*  5 Bits used */
+#define PHY_DEV_MASK        (0x1f<<PHY_DEV_OFFSET)
+
+#define PHY_STATE_OFFSET    (PHY_DEV_SIZE+PHY_DEV_OFFSET)
+#define PHY_STATE_SIZE      (5)        /* 10 Bits used */
+#define PHY_STATE_MASK      (0x1f<<PHY_STATE_OFFSET)
+  #define INIT       (1<<PHY_STATE_OFFSET)
+  #define FINDING    (2<<PHY_STATE_OFFSET)
+  #define FOUND      (3<<PHY_STATE_OFFSET)
+  #define NWAY_START (4<<PHY_STATE_OFFSET)
+  #define NWAY_WAIT  (5<<PHY_STATE_OFFSET)
+  #define LINK_WAIT  (6<<PHY_STATE_OFFSET)
+  #define LINKED     (7<<PHY_STATE_OFFSET)
+  #define LOOPBACK   (8<<PHY_STATE_OFFSET)
+
+#define PHY_SPEED_OFFSET    (PHY_STATE_OFFSET+PHY_STATE_SIZE)
+#define PHY_SPEED_SIZE      (1)     /* 11 Bits used */
+#define PHY_SPEED_MASK      (1<<PHY_SPEED_OFFSET)
+
+#define PHY_DUPLEX_OFFSET   (PHY_SPEED_OFFSET+PHY_SPEED_SIZE)
+#define PHY_DUPLEX_SIZE     (1)     /* 12 Bits used */
+#define PHY_DUPLEX_MASK     (1<<PHY_DUPLEX_OFFSET)
+
+#define PHY_TIM_OFFSET      (PHY_DUPLEX_OFFSET+PHY_DUPLEX_SIZE)
+#define PHY_TIM_SIZE        (10)    /* 22 Bits used */
+#define PHY_TIM_MASK        (0x3ff<<PHY_TIM_OFFSET)
+  #define PHY_FIND_TO (  2<<PHY_TIM_OFFSET)
+  #define PHY_RECK_TO (200<<PHY_TIM_OFFSET)
+  #define PHY_LINK_TO (500<<PHY_TIM_OFFSET)
+  #define PHY_NWST_TO (500<<PHY_TIM_OFFSET)
+  #define PHY_NWDN_TO (800<<PHY_TIM_OFFSET)
+  #define PHY_MDIX_TO (274<<PHY_TIM_OFFSET) /* 2.74 Seconds <--Spec and empirical */
+
+#define PHY_SMODE_OFFSET    (PHY_TIM_OFFSET+PHY_TIM_SIZE)
+#define PHY_SMODE_SIZE      (5)     /* 27 Bits used */
+#define PHY_SMODE_MASK      (0x1f<<PHY_SMODE_OFFSET)
+  #define SMODE_AUTO   (0x10<<PHY_SMODE_OFFSET)
+  #define SMODE_FD100  (0x08<<PHY_SMODE_OFFSET)
+  #define SMODE_HD100  (0x04<<PHY_SMODE_OFFSET)
+  #define SMODE_FD10   (0x02<<PHY_SMODE_OFFSET)
+  #define SMODE_HD10   (0x01<<PHY_SMODE_OFFSET)
+  #define SMODE_ALL    (0x1f<<PHY_SMODE_OFFSET)
+
+#define PHY_CHNG_OFFSET    (PHY_SMODE_OFFSET+PHY_SMODE_SIZE)
+#define PHY_CHNG_SIZE      (1)     /* 28 Bits used */
+#define PHY_CHNG_MASK      (1<<PHY_CHNG_OFFSET)
+  #define PHY_CHANGE (1<<PHY_CHNG_OFFSET)
+
+#define PHY_TIMEDOUT_OFFSET    (PHY_CHNG_OFFSET+PHY_CHNG_SIZE)
+#define PHY_TIMEDOUT_SIZE      (1)     /*  29 Bits used */
+#define PHY_TIMEDOUT_MASK      (1<<PHY_TIMEDOUT_OFFSET)
+  #define PHY_MDIX_SWITCH  (1<<PHY_TIMEDOUT_OFFSET)
+
+#define PHY_MDIX_OFFSET    (PHY_TIMEDOUT_OFFSET+PHY_TIMEDOUT_SIZE)
+#define PHY_MDIX_SIZE      (1)     /*  30 Bits used */
+#define PHY_MDIX_MASK      (1<<PHY_MDIX_OFFSET)
+  #define PHY_MDIX     (1<<PHY_MDIX_OFFSET)
+
+static char *lstate[]={"NULL","INIT","FINDING","FOUND","NWAY_START","NWAY_WAIT","LINK_WAIT","LINKED", "LOOPBACK"};
+static int cpMacDebug;
+
+/*  Local MDIO Register Macros    */
+
+#define myMDIO_ALIVE           MDIO_ALIVE     (PhyDev->miibase)
+#define myMDIO_CONTROL         MDIO_CONTROL   (PhyDev->miibase)
+#define myMDIO_LINK            MDIO_LINK      (PhyDev->miibase)
+#define myMDIO_LINKINT         MDIO_LINKINT   (PhyDev->miibase)
+#define myMDIO_USERACCESS      MDIO_USERACCESS(PhyDev->miibase, PhyDev->inst)
+#define myMDIO_USERPHYSEL      MDIO_USERPHYSEL(PhyDev->miibase, PhyDev->inst)
+#define myMDIO_VER             MDIO_VER       (PhyDev->miibase)
+
+#ifndef VOLATILE32
+#define VOLATILE32(addr) (*((volatile bit32u *)(addr)))
+#endif
+
+/************************************
+***
+*** Delays at least ClockWait cylces
+*** before returning
+***
+**************************************/
+void _mdioDelayEmulate(PHY_DEVICE *PhyDev, int ClockWait)
+  {
+#ifdef _CPHAL_CPMAC                                                  /*+RC3.02*/
+  HAL_DEVICE *HalDev = PhyDev->HalDev;                               /*+RC3.02*/
+  osfuncSleep((int*)&ClockWait);                                     /*+RC3.02*/
+#else                                                                /*+RC3.02*/
+  volatile bit32u i=0;
+  while(ClockWait--)
+    {
+    i |= myMDIO_LINK; /*  MDIO register access to burn cycles */
+    }
+#endif
+  }
+
+void _mdioWaitForAccessComplete(PHY_DEVICE *PhyDev)
+  {
+  while((myMDIO_USERACCESS & MDIO_USERACCESS_GO)!=0)
+    {
+    }
+  }
+
+void _mdioUserAccess(PHY_DEVICE *PhyDev, bit32u method, bit32u regadr, bit32u phyadr, bit32u data)
+  {
+  bit32u  control;
+
+  control =  MDIO_USERACCESS_GO |
+             (method) |
+             (((regadr) << 21) & MDIO_USERACCESS_REGADR) |
+             (((phyadr) << 16) & MDIO_USERACCESS_PHYADR) |
+             ((data) & MDIO_USERACCESS_DATA);
+
+  myMDIO_USERACCESS = control;
+  }
+
+
+
+/************************************
+***
+*** Waits for MDIO_USERACCESS to be ready and reads data
+*** If 'WaitForData' set, waits for read to complete and returns Data,
+*** otherwise returns 0
+*** Note: 'data' is 16 bits but we use 32 bits
+***        to be consistent with rest of the code.
+***
+**************************************/
+bit32u _mdioUserAccessRead(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr)
+  {
+
+  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
+  _mdioUserAccess(PhyDev, MDIO_USERACCESS_READ, regadr, phyadr, 0);
+  _mdioWaitForAccessComplete(PhyDev);  /* Wait for Read to complete */
+
+  return(myMDIO_USERACCESS & MDIO_USERACCESS_DATA);
+  }
+
+
+/************************************
+***
+*** Waits for MDIO_USERACCESS to be ready and writes data
+***
+**************************************/
+void _mdioUserAccessWrite(PHY_DEVICE *PhyDev, bit32u regadr, bit32u phyadr, bit32u data)
+  {
+  _mdioWaitForAccessComplete(PhyDev);  /* Wait until UserAccess ready */
+  _mdioUserAccess(PhyDev, MDIO_USERACCESS_WRITE, regadr, phyadr, data);
+  }
+
+void _mdioDumpPhyDetailed(PHY_DEVICE *PhyDev)
+{
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyNum;
+  int     RegData;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  RegData = _mdioUserAccessRead(PhyDev, 0, PhyNum);
+  mdioPrintf("PhyControl: %04X, Lookback=%s, Speed=%s, Duplex=%s\n",
+    RegData,
+    RegData&PHY_LOOP?"On":"Off",
+    RegData&PHY_100?"100":"10",
+    RegData&PHY_FD?"Full":"Half");
+  RegData = _mdioUserAccessRead(PhyDev, 1, PhyNum);
+  mdioPrintf("PhyStatus: %04X, AutoNeg=%s, Link=%s\n",
+    RegData,
+    RegData&NWAY_COMPLETE?"Complete":"NotComplete",
+    RegData&PHY_LINKED?"Up":"Down");
+  RegData = _mdioUserAccessRead(PhyDev, 4, PhyNum);
+  mdioPrintf("PhyMyCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
+    RegData,
+    RegData&NWAY_FD100?"Yes":"No",
+    RegData&NWAY_HD100?"Yes":"No",
+    RegData&NWAY_FD10?"Yes":"No",
+    RegData&NWAY_HD10?"Yes":"No");
+
+  RegData = _mdioUserAccessRead(PhyDev, 5, PhyNum);
+  mdioPrintf("PhyPartnerCapability: %04X, 100FD=%s, 100HD=%s, 10FD=%s, 10HD=%s\n",
+    RegData,
+    RegData&NWAY_FD100?"Yes":"No",
+    RegData&NWAY_HD100?"Yes":"No",
+    RegData&NWAY_FD10?"Yes":"No",
+    RegData&NWAY_HD10?"Yes":"No");
+}
+void _mdioDumpPhy(PHY_DEVICE *PhyDev, bit32u p)
+  {
+  bit32u j,n,PhyAcks;
+  bit32u PhyRegAddr;
+  bit32u phy_num;
+  bit32u PhyMask  = PhyDev->PhyMask;
+
+  PhyAcks=myMDIO_ALIVE;
+  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
+
+  for(phy_num=0,j=1;phy_num<32;phy_num++,j<<=1)
+    {
+    if (PhyAcks&j)
+      {
+      mdioPrintf("%2d%s:",phy_num,(phy_num==p)?">":" ");
+      for(PhyRegAddr=0;PhyRegAddr<6;PhyRegAddr++)
+        {
+        n = _mdioUserAccessRead(PhyDev, PhyRegAddr, phy_num);
+        mdioPrintf(" %04x",n&0x0ffff);
+        }
+      mdioPrintf("\n");
+      }
+    }
+  _mdioDumpPhyDetailed(PhyDev);
+  }
+
+void _mdioDumpState(PHY_DEVICE *PhyDev)
+  {
+  bit32u state    = PhyDev->PhyState;
+
+  if (!cpMacDebug) return;
+
+  mdioPrintf("Phy: %d, ",(state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
+  mdioPrintf("State: %d/%s, ",(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET,lstate[(state&PHY_STATE_MASK)>>PHY_STATE_OFFSET]);
+  mdioPrintf("Speed: %d, ",(state&PHY_SPEED_MASK)>>PHY_SPEED_OFFSET);
+  mdioPrintf("Dup: %d, ",(state&PHY_DUPLEX_MASK)>>PHY_DUPLEX_OFFSET);
+  mdioPrintf("Tim: %d, ",(state&PHY_TIM_MASK)>>PHY_TIM_OFFSET);
+  mdioPrintf("SMode: %d, ",(state&PHY_SMODE_MASK)>>PHY_SMODE_OFFSET);
+  mdioPrintf("Chng: %d",(state&PHY_CHNG_MASK)>>PHY_CHNG_OFFSET);
+  mdioPrintf("\n");
+
+  if (((state&PHY_STATE_MASK)!=FINDING)&&((state&PHY_STATE_MASK)!=INIT))
+    _mdioDumpPhy(PhyDev, (state&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
+  }
+
+
+void _mdioResetPhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
+  {
+  bit16u PhyControlReg;
+
+  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_RESET);
+  if (cpMacDebug)
+    mdioPrintf("cpMacMdioPhYReset(%d)\n",PhyNum);
+
+  /* Read control register until Phy Reset is complete */
+  do
+   {
+    PhyControlReg = _mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
+   }
+   while (PhyControlReg & PHY_RESET); /* Wait for Reset to clear */
+  }
+
+void _mdioDisablePhy(PHY_DEVICE *PhyDev,bit32u PhyNum)
+  {
+  _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_ISOLATE|PHY_PDOWN);
+
+  if (cpMacDebug)
+    mdioPrintf("cpMacMdioDisablePhy(%d)\n",PhyNum);
+
+  }
+
+void _MdioInitState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u CurrentState;
+
+  CurrentState=*PhyState;
+  CurrentState=(CurrentState&~PHY_TIM_MASK)|(PHY_FIND_TO);
+  CurrentState=(CurrentState&~PHY_STATE_MASK)|(FINDING);
+  CurrentState=(CurrentState&~PHY_SPEED_MASK);
+  CurrentState=(CurrentState&~PHY_DUPLEX_MASK);
+  CurrentState|=PHY_CHANGE;
+
+  *PhyState=CurrentState;
+
+  }
+
+void _MdioFindingState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyMask  = PhyDev->PhyMask;
+  bit32u  PhyNum,i,j,PhyAcks;
+
+
+  PhyNum=PHY_NOT_FOUND;
+
+  if (*PhyState&PHY_TIM_MASK)
+    {
+    *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
+    }
+   else
+    {
+    PhyAcks=myMDIO_ALIVE;
+    PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
+
+    for(i=0,j=1;(i<32)&&((j&PhyAcks)==0);i++,j<<=1);
+
+    if ((PhyAcks)&&(i<32)) PhyNum=i;
+    if (PhyNum!=PHY_NOT_FOUND)
+      {
+      /*  Phy Found! */
+      *PhyState=(*PhyState&~PHY_DEV_MASK)|((PhyNum&PHY_DEV_MASK)<<PHY_DEV_OFFSET);
+      *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
+      *PhyState|=PHY_CHANGE;
+      if (cpMacDebug)
+        mdioPrintf("cpMacMdioFindingState: PhyNum: %d\n",PhyNum);
+      }
+     else
+      {
+      if (cpMacDebug)
+        mdioPrintf("cpMacMdioFindingState: Timed Out looking for a Phy!\n");
+      *PhyState|=PHY_RECK_TO;  /* This state currently has no support?*/
+      }
+    }
+  }
+
+void _MdioFoundState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState  = &PhyDev->PhyState;
+  bit32u  PhyMask   = PhyDev->PhyMask;
+  bit32u  MLinkMask = PhyDev->MLinkMask;
+  bit32u  PhyNum,PhyStatus,NWAYadvertise,m,phynum,i,j,PhyAcks;
+  bit32u  PhySel;
+
+  if ((*PhyState&PHY_SMODE_MASK)==0) return;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  PhyAcks=myMDIO_ALIVE;
+  PhyAcks&=PhyMask;   /* Only interested in 'our' Phys */
+
+  /* Will now isolate all our Phys, except the one we have decided to use */
+  for(phynum=0,j=1;phynum<32;phynum++,j<<=1)
+    {
+    if (PhyAcks&j)
+      {
+        if (phynum!=PhyNum)  /* Do not disabled Found Phy */
+          _mdioDisablePhy(PhyDev,phynum);
+      }
+    }
+
+  /*  Reset the Phy and proceed with auto-negotiation */
+  _mdioResetPhy(PhyDev,PhyNum);
+
+  /* Now setup the MDIOUserPhySel register */
+
+  PhySel=PhyNum;  /* Set the phy address */
+
+  /*  Set the way Link will be Monitored */
+  /* Check the Link Selection Method */
+  if ((1 << PhyNum) & MLinkMask)
+    PhySel |= MDIO_USERPHYSEL_LINKSEL;
+
+  myMDIO_USERPHYSEL = PhySel;  /* update PHYSEL */
+
+  /* Get the Phy Status */
+  PhyStatus = _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
+
+
+#ifdef _CPHAL_CPMAC
+  /*  For Phy Internal loopback test, need to wait until Phy
+      found, then set Loopback */
+  if (PhyDev->HalDev->MdioConnect & _CPMDIO_LOOPBK)
+    {
+    /* Set Phy in Loopback */
+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, PHY_LOOP|PHY_FD);
+    /* Do a read to ensure PHY_LOOP has completed */
+    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
+    *PhyState=(*PhyState&~PHY_STATE_MASK)|(LOOPBACK);
+    *PhyState|=PHY_CHANGE;
+    return;
+    }
+#endif
+
+
+  if (cpMacDebug)
+    mdioPrintf("Enable Phy to negotiate external connection\n");
+
+  NWAYadvertise=NWAY_SEL;
+  if (*PhyState&SMODE_FD100) NWAYadvertise|=NWAY_FD100;
+  if (*PhyState&SMODE_HD100) NWAYadvertise|=NWAY_HD100;
+  if (*PhyState&SMODE_FD10)  NWAYadvertise|=NWAY_FD10;
+  if (*PhyState&SMODE_HD10)  NWAYadvertise|=NWAY_HD10;
+
+  *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
+  if ((PhyStatus&NWAY_CAPABLE)&&(*PhyState&SMODE_AUTO))   /*NWAY Phy Detected*/
+    {
+    /*For NWAY compliant Phys                                                */
+
+    _mdioUserAccessWrite(PhyDev, NWAY_ADVERTIZE_REG, PhyNum, NWAYadvertise);
+
+    if (cpMacDebug)
+      {
+      mdioPrintf("NWAY Advertising: ");
+      if (NWAYadvertise&NWAY_FD100) mdioPrintf("FullDuplex-100 ");
+      if (NWAYadvertise&NWAY_HD100) mdioPrintf("HalfDuplex-100 ");
+      if (NWAYadvertise&NWAY_FD10)  mdioPrintf("FullDuplex-10 ");
+      if (NWAYadvertise&NWAY_HD10)  mdioPrintf("HalfDuplex-10 ");
+      mdioPrintf("\n");
+      }
+
+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN);
+
+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
+
+    *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
+    }
+   else
+    {
+    *PhyState&=~SMODE_AUTO;   /*The Phy is not capable of auto negotiation!  */
+    m=NWAYadvertise;
+    for(j=0x8000,i=0;(i<16)&&((j&m)==0);i++,j>>=1);
+    m=j;
+    j=0;
+    if (m&(NWAY_FD100|NWAY_HD100))
+      {
+      j=PHY_100;
+      m&=(NWAY_FD100|NWAY_HD100);
+      }
+    if (m&(NWAY_FD100|NWAY_FD10))
+      j |= PHY_FD;
+    if (cpMacDebug)
+      mdioPrintf("Requested PHY mode %s Duplex %s Mbps\n",(j&PHY_FD)?"Full":"Half",(j&PHY_100)?"100":"10");
+    _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, j);
+    *PhyState&=~PHY_SPEED_MASK;
+    if (j&PHY_100)
+      *PhyState|=(1<<PHY_SPEED_OFFSET);
+    *PhyState&=~PHY_DUPLEX_MASK;
+    if (j&PHY_FD)
+      *PhyState|=(1<<PHY_DUPLEX_OFFSET);
+    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
+    }
+     _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
+  }
+
+void _MdioNwayStartState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u PhyNum,PhyMode;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  /*Wait for Negotiation to start                                            */
+
+  PhyMode=_mdioUserAccessRead(PhyDev, PHY_CONTROL_REG, PhyNum);
+
+  if((PhyMode&RENEGOTIATE)==0)
+    {
+    _mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum); /*Flush pending latch bits*/
+    *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
+    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
+    _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
+    }
+   else
+    {
+    if (*PhyState&PHY_TIM_MASK)
+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
+     else
+      _mdioPhyTimeOut(PhyDev);
+    }
+  }
+
+void _MdioNwayWaitState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyNum,PhyStatus,NWAYadvertise,NWAYREadvertise,NegMode,i,j;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
+
+  if (PhyStatus&NWAY_COMPLETE)
+    {
+    *PhyState|=PHY_CHANGE;
+    *PhyState&=~PHY_SPEED_MASK;
+    *PhyState&=~PHY_DUPLEX_MASK;
+
+    NWAYadvertise   =_mdioUserAccessRead(PhyDev, NWAY_ADVERTIZE_REG, PhyNum);
+    NWAYREadvertise =_mdioUserAccessRead(PhyDev, NWAY_REMADVERTISE_REG, PhyNum);
+
+    /* Negotiated mode is we and the remote have in common */
+    NegMode = NWAYadvertise & NWAYREadvertise;
+
+    if (cpMacDebug)
+      {
+       mdioPrintf("Phy: %d, ",(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
+       mdioPrintf("NegMode %04X, NWAYadvertise %04X, NWAYREadvertise %04X\n",
+         NegMode,  NWAYadvertise, NWAYREadvertise);
+      }
+
+    /* Limit negotiation to fields below */
+    NegMode &= (NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10);
+
+    if (NegMode==0)
+      {
+      NegMode=(NWAY_HD100|NWAY_HD10)&NWAYadvertise; /*or 10 ?? who knows, Phy is not MII compliant*/
+      if(cpMacDebug)
+        {
+         mdioPrintf("Mdio:WARNING: Negotiation complete but NO agreement, default is HD\n");
+         _mdioDumpPhyDetailed(PhyDev);
+        } 
+      }
+    for(j=0x8000,i=0;(i<16)&&((j&NegMode)==0);i++,j>>=1);
+
+
+    NegMode=j;
+    if (cpMacDebug)
+      {
+      mdioPrintf("Negotiated connection: ");
+      if (NegMode&NWAY_FD100) mdioPrintf("FullDuplex 100 Mbs\n");
+      if (NegMode&NWAY_HD100) mdioPrintf("HalfDuplex 100 Mbs\n");
+      if (NegMode&NWAY_FD10) mdioPrintf("FullDuplex 10 Mbs\n");
+      if (NegMode&NWAY_HD10) mdioPrintf("HalfDuplex 10 Mbs\n");
+      }
+    if (NegMode!=0)
+      {
+      if (PhyStatus&PHY_LINKED)
+        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
+       else
+        *PhyState=(*PhyState&~PHY_STATE_MASK)|LINK_WAIT;
+      if (NegMode&(NWAY_FD100|NWAY_HD100))
+        *PhyState=(*PhyState&~PHY_SPEED_MASK)|(1<<PHY_SPEED_OFFSET);
+      if (NegMode&(NWAY_FD100|NWAY_FD10))
+        *PhyState=(*PhyState&~PHY_DUPLEX_MASK)|(1<<PHY_DUPLEX_OFFSET);
+      }
+    }
+   else
+    {
+    if (*PhyState&PHY_TIM_MASK)
+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
+     else
+      _mdioPhyTimeOut(PhyDev);
+    }
+  }
+
+void _MdioLinkWaitState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyStatus;
+  bit32u  PhyNum;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
+
+  if (PhyStatus&PHY_LINKED)
+    {
+    *PhyState=(*PhyState&~PHY_STATE_MASK)|LINKED;
+    *PhyState|=PHY_CHANGE;
+    }
+   else
+    {
+    if (*PhyState&PHY_TIM_MASK)
+      *PhyState=(*PhyState&~PHY_TIM_MASK)|((*PhyState&PHY_TIM_MASK)-(1<<PHY_TIM_OFFSET));
+     else
+      _mdioPhyTimeOut(PhyDev);
+    }
+  }
+
+void _mdioPhyTimeOut(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState;
+
+  if(_mdioMdixSupported(PhyDev) == 0)
+    return;  /* AutoMdix not supported */
+
+  PhyState = &PhyDev->PhyState;
+
+  /*  Indicate MDI/MDIX mode switch is needed */
+  *PhyState|=PHY_MDIX_SWITCH;
+
+  /* Toggle the MDIX mode indicatir */
+  if(*PhyState & PHY_MDIX)
+    *PhyState &= ~PHY_MDIX_MASK;       /* Current State is MDIX, set to MDI */
+  else
+    *PhyState |=  PHY_MDIX_MASK;      /* Current State is MDI, set to MDIX */
+
+  /* Reset state machine to FOUND */
+  *PhyState=(*PhyState&~PHY_STATE_MASK)|(FOUND);
+  }
+
+void _MdioLoopbackState(PHY_DEVICE *PhyDev)
+  {
+  return;
+  }
+
+void _MdioLinkedState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyNum   = (*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  if (myMDIO_LINK&(1<<PhyNum)) return;  /* if still Linked, exit*/
+
+  /* Not Linked */
+  *PhyState&=~(PHY_STATE_MASK|PHY_TIM_MASK);
+  if (*PhyState&SMODE_AUTO)
+    *PhyState|=PHY_CHANGE|NWAY_WAIT|PHY_NWDN_TO;
+   else
+    *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
+    
+  _mdioMdixDelay(PhyDev);  /* If AutoMdix add delay */
+  }
+
+void _MdioDefaultState(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  /*Awaiting a cpMacMdioInit call                                             */
+  *PhyState|=PHY_CHANGE;
+  }
+
+
+/*User Calls*********************************************************       */
+
+void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full)
+  {
+  }
+
+
+int cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetReg, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info)
+  {
+  bit32u HighestChannel;
+  bit32u ControlState;
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u clkdiv;                                                  /*MJH+030328*/
+
+  cpMacDebug=verbose;  
+ 
+  PhyDev->miibase   = miibase;
+  PhyDev->inst      = inst;
+  PhyDev->PhyMask   = PhyMask;
+  PhyDev->MLinkMask = MLinkMask;
+  PhyDev->MdixMask  = MdixMask;
+#ifdef _CPHAL_CPMAC
+  PhyDev->HalDev    = (HAL_DEVICE*) Info;
+#endif
+
+  *PhyState &= ~PHY_MDIX_MASK;   /* Set initial State to MDI */
+   
+  /* Check that the channel supplied is within range */
+  HighestChannel = (myMDIO_CONTROL & MDIO_CONTROL_HIGHEST_USER_CHANNEL) > 8;
+  if(inst > HighestChannel)
+    return(HighestChannel);
+
+  /*Setup MII MDIO access regs                                              */
+
+  /* Calculate the correct value for the mclkdiv */
+  /* See PITS #14 */
+  if (MdioClockFreq)                                              /*MJH+030402*/
+     clkdiv = (MdioBusFreq / MdioClockFreq) - 1;                  /*MJH+030402*/
+  else                                                            /*MJH+030402*/
+     clkdiv = 0xFF;                                               /*MJH+030402*/
+
+  ControlState  = MDIO_CONTROL_ENABLE;
+  ControlState |= (clkdiv & MDIO_CONTROL_CLKDIV);                 /*MJH+030328*/
+
+  /*
+      If mii is not out of reset or if the Control Register is not set correctly
+      then initalize
+  */
+  if( !(VOLATILE32(ResetReg) & (1 << ResetBit)) ||
+     ((myMDIO_CONTROL & (MDIO_CONTROL_CLKDIV | MDIO_CONTROL_ENABLE)) != ControlState) )/*GSG~030404*/
+    {
+    /*  MII not setup, Setup initial condition  */
+    VOLATILE32(ResetReg) &= ~(1 << ResetBit);
+    _mdioDelayEmulate(PhyDev, 64);
+    VOLATILE32(ResetReg) |= (1 << ResetBit);  /* take mii out of reset  */
+    _mdioDelayEmulate(PhyDev, 64);
+    myMDIO_CONTROL = ControlState;  /* Enable MDIO   */
+    }
+
+  *PhyState=INIT;
+
+  if (cpMacDebug)
+    mdioPrintf("cpMacMdioInit\n");
+  _mdioDumpState(PhyDev);
+  return(0);
+  }
+
+void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u CurrentState;
+
+  PhyDev->PhyMode = PhyMode;   /* used for AUTOMIDX, planned to replace PhyState fields */
+
+  *PhyState&=~PHY_SMODE_MASK;
+
+  if (PhyMode&NWAY_AUTO)  *PhyState|=SMODE_AUTO;
+  if (PhyMode&NWAY_FD100) *PhyState|=SMODE_FD100;
+  if (PhyMode&NWAY_HD100) *PhyState|=SMODE_HD100;
+  if (PhyMode&NWAY_FD10)  *PhyState|=SMODE_FD10;
+  if (PhyMode&NWAY_HD10)  *PhyState|=SMODE_HD10;
+
+  CurrentState=*PhyState&PHY_STATE_MASK;
+  if ((CurrentState==NWAY_START)||
+      (CurrentState==NWAY_WAIT) ||
+      (CurrentState==LINK_WAIT) ||
+      (CurrentState==LINKED)      )
+    *PhyState=(*PhyState&~PHY_STATE_MASK)|FOUND|PHY_CHANGE;
+  if (cpMacDebug)
+    mdioPrintf("cpMacMdioSetPhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
+     PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
+     PhyMode&NWAY_HD100);
+  _mdioDumpState(PhyDev);
+  }
+
+/* cpMacMdioTic is called every 10 mili seconds to process Phy states         */
+
+int cpMacMdioTic(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  CurrentState;
+
+  /*Act on current state of the Phy                                          */
+
+  CurrentState=*PhyState;
+  switch(CurrentState&PHY_STATE_MASK)
+    {
+    case INIT:       _MdioInitState(PhyDev);      break;
+    case FINDING:    _MdioFindingState(PhyDev);   break;
+    case FOUND:      _MdioFoundState(PhyDev);     break;
+    case NWAY_START: _MdioNwayStartState(PhyDev); break;
+    case NWAY_WAIT:  _MdioNwayWaitState(PhyDev);  break;
+    case LINK_WAIT:  _MdioLinkWaitState(PhyDev);  break;
+    case LINKED:     _MdioLinkedState(PhyDev);    break;
+    case LOOPBACK:   _MdioLoopbackState(PhyDev);  break;
+    default:         _MdioDefaultState(PhyDev);   break;
+    }
+
+  /*Dump state info if a change has been detected                            */
+
+  if ((CurrentState&~PHY_TIM_MASK)!=(*PhyState&~PHY_TIM_MASK))
+    _mdioDumpState(PhyDev);
+
+  /*  Check is MDI/MDIX mode switch is needed */
+  if(*PhyState & PHY_MDIX_SWITCH)
+    {
+    bit32u Mdix;
+
+    *PhyState &= ~PHY_MDIX_SWITCH;  /* Clear Mdix Flip indicator */
+
+    if(*PhyState & PHY_MDIX)
+      Mdix = 1;
+    else
+      Mdix = 0;
+    return(_MIIMDIO_MDIXFLIP|Mdix);
+    }
+
+  /*Return state change to user                                              */
+
+  if (*PhyState&PHY_CHNG_MASK)
+    {
+    *PhyState&=~PHY_CHNG_MASK;
+    return(1);
+    }
+   else
+    return(0);
+  }
+
+/* cpMacMdioGetDuplex is called to retrieve the Duplex info                   */
+
+int cpMacMdioGetDuplex(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  return((*PhyState&PHY_DUPLEX_MASK)?1:0);  /* return 0 or a 1  */
+  }
+
+/* cpMacMdioGetSpeed is called to retreive the Speed info                     */
+
+int cpMacMdioGetSpeed(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  return(*PhyState&PHY_SPEED_MASK);
+  }
+
+/* cpMacMdioGetPhyNum is called to retreive the Phy Device Adr info           */
+
+int cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  return((*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET);
+  }
+
+/* cpMacMdioGetLoopback is called to Determine if the LOOPBACK state has been reached*/
+
+int cpMacMdioGetLoopback(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  return((*PhyState&PHY_STATE_MASK)==LOOPBACK);
+  }
+/* cpMacMdioGetLinked is called to Determine if the LINKED state has been reached*/
+
+int cpMacMdioGetLinked(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  return((*PhyState&PHY_STATE_MASK)==LINKED);
+  }
+
+void cpMacMdioLinkChange(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u  PhyNum,PhyStatus;
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+
+  if (cpMacMdioGetLinked(PhyDev))
+    {
+    PhyStatus=_mdioUserAccessRead(PhyDev, PHY_STATUS_REG, PhyNum);
+
+    if ((PhyStatus&PHY_LINKED)==0)
+      {
+      *PhyState&=~(PHY_TIM_MASK|PHY_STATE_MASK);
+      if (*PhyState&SMODE_AUTO)
+        {
+        _mdioUserAccessWrite(PhyDev, PHY_CONTROL_REG, PhyNum, AUTO_NEGOTIATE_EN|RENEGOTIATE);
+        *PhyState|=PHY_CHANGE|PHY_NWST_TO|NWAY_START;
+        }
+       else
+        {
+        *PhyState|=PHY_CHANGE|PHY_LINK_TO|LINK_WAIT;
+        }
+      }
+    }
+  }
+
+void cpMacMdioGetVer(bit32u miibase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin)
+  {
+  bit32u  Ver;
+
+  Ver = MDIO_VER(miibase);
+
+  *ModID  = (Ver & MDIO_VER_MODID) >> 16;
+  *RevMaj = (Ver & MDIO_VER_REVMAJ) >> 8;
+  *RevMin = (Ver & MDIO_VER_REVMIN);
+  }
+
+int cpMacMdioGetPhyDevSize(void)
+  {
+  return(sizeof(PHY_DEVICE));
+  }
+
+  /* returns 0 if current Phy has AutoMdix support, otherwise 0 */
+int _mdioMdixSupported(PHY_DEVICE *PhyDev)
+  {
+  bit32u *PhyState = &PhyDev->PhyState;
+  bit32u PhyNum;
+
+  if((PhyDev->PhyMode & NWAY_AUTOMDIX) == 0)
+    return(0);  /* AutoMdix not turned on */
+
+  PhyNum=(*PhyState&PHY_DEV_MASK)>>PHY_DEV_OFFSET;
+  if( ((1<<PhyNum) & PhyDev->MdixMask) == 0)
+    return(0);  /*  Phy does not support AutoMdix*/
+
+  return(1);
+  }
+
+/* If current Phy has AutoMdix support add Mdix Delay to the Timer State Value */
+void _mdioMdixDelay(PHY_DEVICE *PhyDev)
+  {
+  int Delay;
+  bit32u *PhyState = &PhyDev->PhyState;  
+#ifdef _CPHAL_CPMAC
+  HAL_DEVICE *HalDev = PhyDev->HalDev;
+#endif
+
+  if(_mdioMdixSupported(PhyDev) == 0)
+    return;  /* AutoMdix not supported */
+/* Currently only supported when used with the CPMAC */
+#ifdef _CPHAL_CPMAC
+  /* Get the Delay value in milli-seconds and convert to ten-milli second value */
+  Delay = cpmacRandomRange(HalDev, _AUTOMDIX_DELAY_MIN, _AUTOMDIX_DELAY_MAX);
+  Delay /= 10;
+
+  /*  Add AutoMidx Random Switch Delay to AutoMdix Link Delay */
+
+  Delay += (PHY_MDIX_TO>>PHY_TIM_OFFSET);
+
+  /* Change Timeout value to AutoMdix standard */
+  *PhyState &= ~(PHY_TIM_MASK);  /* Clear current Time out value */
+  *PhyState |=  (Delay<<PHY_TIM_OFFSET);     /* Set new value */
+#endif
+  }
+
+
diff -urN linux.old/drivers/net/avalanche_cpmac/cpmdio.h linux.dev/drivers/net/avalanche_cpmac/cpmdio.h
--- linux.old/drivers/net/avalanche_cpmac/cpmdio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpmdio.h	2005-07-12 02:48:42.047593000 +0200
@@ -0,0 +1,73 @@
+/*****************************************************************************
+**      TNETD53xx Software Support
+**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
+**
+**      FILE: cpmdio.h   User Include for MDIO API Access
+**
+**      DESCRIPTION:
+**              This include file contains definitions for the the MDIO API
+**
+**      HISTORY:
+**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
+**              04Apr02 Michael Hanrahan Added Interrupt Support
+*****************************************************************************/
+#ifndef _INC_CPMDIO
+#define _INC_CPMDIO
+
+
+#ifndef __CPHAL_CPMDIO
+typedef void PHY_DEVICE;
+#endif
+
+
+/*Version Information */
+
+void cpMacMdioGetVer(bit32u miiBase, bit32u *ModID,  bit32u *RevMaj,  bit32u *RevMin);
+
+/*Called once at the begining of time                                        */
+
+int  cpMacMdioInit(PHY_DEVICE *PhyDev, bit32u miibase, bit32u inst, bit32u PhyMask, bit32u MLinkMask, bit32u MdixMask, bit32u ResetBase, bit32u ResetBit, bit32u MdioBusFreq, bit32u MdioClockFreq, int verbose, void *Info);
+int  cpMacMdioGetPhyDevSize(void);
+
+
+/*Called every 10 mili Seconds, returns TRUE if there has been a mode change */
+
+int cpMacMdioTic(PHY_DEVICE *PhyDev);
+
+/*Called to set Phy mode                                                     */
+
+void cpMacMdioSetPhyMode(PHY_DEVICE *PhyDev,bit32u PhyMode);
+
+/*Calls to retreive info after a mode change!                                */
+
+int  cpMacMdioGetDuplex(PHY_DEVICE *PhyDev);
+int  cpMacMdioGetSpeed(PHY_DEVICE *PhyDev);
+int  cpMacMdioGetPhyNum(PHY_DEVICE *PhyDev);
+int  cpMacMdioGetLinked(PHY_DEVICE *PhyDev);
+void cpMacMdioLinkChange(PHY_DEVICE *PhyDev);
+
+/*  Shot Down  */
+
+void cpMacMdioClose(PHY_DEVICE *PhyDev, int Full);
+
+
+/* Phy Mode Values  */
+#define NWAY_AUTOMDIX       (1<<16)
+#define NWAY_FD100          (1<<8)
+#define NWAY_HD100          (1<<7)
+#define NWAY_FD10           (1<<6)
+#define NWAY_HD10           (1<<5)
+#define NWAY_AUTO           (1<<0)
+
+/*
+ *
+ *    Tic() return values
+ *
+ */
+
+#define _MIIMDIO_MDIXFLIP (1<<28)
+
+#define _AUTOMDIX_DELAY_MIN  80  /* milli-seconds*/
+#define _AUTOMDIX_DELAY_MAX 200  /* milli-seconds*/
+
+#endif  /*  _INC_CPMDIO */
diff -urN linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c
--- linux.old/drivers/net/avalanche_cpmac/cppi_cpmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cppi_cpmac.c	2005-07-12 02:48:42.048593000 +0200
@@ -0,0 +1,1345 @@
+/*************************************************************************
+ *  TNETDxxxx Software Support
+ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
+ *
+ *  FILE: cppi.c
+ *
+ *  DESCRIPTION:
+ *      This file contains shared code for all CPPI modules.
+ *
+ *  HISTORY:
+ *   7Aug02 Greg RC1.00  Original Version created.
+ *  27Sep02 Mick RC1.01  Merged for use by CPMAC/CPSAR
+ *  16Oct02 Mick RC1.02  Performance Tweaks (see cppihist.txt)
+ *  12Nov02 Mick RC1.02  Updated to use cpmac_reg.h
+ *  09Jan03 Mick RC3.01  Removed modification to RxBuffer ptr
+ *  28Mar03 Mick 1.03    RxReturn now returns error if Malloc Fails
+ *  10Apr03 Mick 1.03.02 Added Needs Buffer Support
+ *  11Jun03 Mick 1.06.02 halSend() errors corrected
+ *  23Aug04 Mick 1.07.08 cpmac only - Send: bypass threshold check if TxInts re-enabled
+ *
+ *  @author  Greg Guyotte
+ *  @version 1.00
+ *  @date    7-Aug-2002
+ *****************************************************************************/
+/* each CPPI module must modify this file, the rest of the
+                     code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
+
+/* CPPI registers */
+
+/* the following defines are not CPPI specific */
+
+static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork);                     
+
+static void FreeRx(HAL_DEVICE *HalDev, int Ch)
+  {
+   HAL_RCB *rcb_ptr;                                                /*+GSG 030303*/
+   int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;                        /*+GSG 030303*/
+   int Num = HalDev->ChData[Ch].RxNumBuffers, i;                    /*+GSG 030303*/
+
+   /* Free Rx data buffers attached to descriptors, if necessary */
+   if (HalDev->RcbStart[Ch] != 0)                                   /*+GSG 030303*/
+     {                                                              /*+GSG 030303*/
+      for(i=0;i<Num;i++)                                            /*+GSG 030303*/
+        {                                                           /*+GSG 030303*/
+         rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
+
+         /* free the data buffer */
+         if (rcb_ptr->DatPtr != 0)
+       {
+
+        HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
+        rcb_ptr->OsInfo=0;                                        /*MJH+030522*/
+        rcb_ptr->DatPtr=0;                                        /*MJH+030522*/
+       }
+    }                                                           /*+GSG 030303*/
+     }                                                              /*+GSG 030303*/
+
+   /* free up all desciptors at once */
+   HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
+
+   /* mark buffers as freed */
+   HalDev->RcbStart[Ch] = 0;
+  }
+
+static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
+  {
+
+/*+GSG 030303*/
+
+   /* free all descriptors at once */
+   HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
+
+   HalDev->TcbStart[Ch][Queue] = 0;
+  }
+
+/* return of 0 means that this code executed, -1 means the interrupt was not
+   a teardown interrupt */
+static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
+  {
+   bit32u base = HalDev->dev_base;
+
+   /* check to see if the interrupt is a teardown interrupt */
+   if (((CPMAC_RX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
+     {
+      /* finish channel teardown */
+
+      /* Free channel resources on a FULL teardown */
+      if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
+        {
+         FreeRx(HalDev, Ch);
+        }
+
+      /* bug fix - clear Rx channel pointers on teardown */
+      HalDev->RcbPool[Ch] = 0;
+      HalDev->RxActQueueHead[Ch]  = 0;
+      HalDev->RxActQueueCount[Ch] = 0;
+      HalDev->RxActive[Ch] = FALSE;
+
+      /* write completion pointer */
+      (CPMAC_RX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
+
+      /* use direction bit as a teardown pending bit! May be able to
+         use only one teardown pending integer in HalDev */
+
+      HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
+
+      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
+
+      HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
+      CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
+      if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
+    {
+
+     HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_RX);
+    }
+      HalDev->RxTeardownPending[Ch] = 0;
+
+      return (EC_NO_ERRORS);
+     }
+   return (-1);
+  }
+
+/* return of 0 means that this code executed, -1 means the interrupt was not
+   a teardown interrupt.  Note: this code is always called with Queue == 0 (hi priority). */
+static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
+  {
+   bit32u base = HalDev->dev_base;
+   HAL_TCB *Last, *Curr, *First;                                    /*+GSG 030303*/
+   int i;
+
+   if (((CPMAC_TX_INT_ACK( base , Ch ))  & TEARDOWN_VAL) == TEARDOWN_VAL)
+     {
+      /* perform all actions for both queues (+GSG 040212) */
+      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
+        {
+         /* return outstanding buffers to OS                             +RC3.02*/
+         Curr = HalDev->TxActQueueHead[Ch][i];                     /*+GSG 030303*/
+         First = Curr;                                                 /*+GSG 030303*/
+         while (Curr)                                                  /*+GSG 030303*/
+           {                                                           /*+GSG 030303*/
+            /* Pop TCB(s) for packet from the stack */                 /*+GSG 030303*/
+            Last = Curr->Eop;                                          /*+GSG 030303*/
+            HalDev->TxActQueueHead[Ch][i] = Last->Next;            /*+GSG 030303*/
+                                                                    /*+GSG 030303*/
+            /* return to OS */                                         /*+GSG 030303*/
+            HalDev->OsFunc->SendComplete(Curr->OsInfo);                /*+GSG 030303*/
+                                                                    /*+GSG 030303*/
+            /* Push Tcb(s) back onto the stack */                      /*+GSG 030303*/
+            Curr = Last->Next;                                         /*+GSG 030303*/
+            Last->Next = HalDev->TcbPool[Ch][i];                   /*+GSG 030303*/
+            HalDev->TcbPool[Ch][i] = First;                        /*+GSG 030303*/
+                                                                    /*+GSG 030303*/
+            /* set the first(SOP) pointer for the next packet */       /*+GSG 030303*/
+            First = Curr;                                              /*+GSG 030303*/
+           }                                                           /*+GSG 030303*/
+        }
+
+      /* finish channel teardown */
+
+      if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
+        {
+         FreeTx(HalDev, Ch, 0);
+
+         if (HalDev->ChData[Ch].TxNumQueues == 2)
+           FreeTx(HalDev, Ch, 1);
+        } /* if FULL teardown */
+
+      /* perform all actions for both queues (+GSG 040212) */
+      for (i=0; i<HalDev->ChData[Ch].TxNumQueues; i++)
+        {
+         /* bug fix - clear Tx channel pointers on teardown */
+         HalDev->TcbPool[Ch][i] = 0;
+         HalDev->TxActQueueHead[Ch][i]  = 0;
+         HalDev->TxActQueueCount[Ch][i] = 0;
+         HalDev->TxActive[Ch][i]        = FALSE;
+        }
+
+      /* write completion pointer, only needed for the high priority queue */
+      (CPMAC_TX_INT_ACK( base , Ch ))  = TEARDOWN_VAL;
+
+      /* no longer pending teardown */
+      HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
+
+      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
+
+      HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
+      CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Ch);
+      if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
+        {
+
+         HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX);
+        }
+      HalDev->TxTeardownPending[Ch] = 0;
+
+      return (EC_NO_ERRORS);
+     }
+   return (-1);
+  }
+
+/* +GSG 030421 */
+static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
+  {
+   if (HalDev->RxActQueueHead[Ch]==0)
+     {
+
+      HalDev->RxActQueueHead[Ch]=FirstRcb;
+      HalDev->RxActQueueTail[Ch]=LastRcb;
+      if (!HalDev->RxActive[Ch])
+        {
+         /* write Rx Queue Head Descriptor Pointer */
+         ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
+         HalDev->RxActive[Ch]=TRUE;
+        }
+     }
+    else
+     {
+      register HAL_RCB *OldTailRcb;
+      register bit32u rmode;
+      
+      HalDev->OsFunc->CriticalOn();
+      OldTailRcb=HalDev->RxActQueueTail[Ch];
+      OldTailRcb->Next=(void *)FirstRcb;
+      OldTailRcb=VirtToVirtNoCache(OldTailRcb);
+      OldTailRcb->HNext=VirtToPhys(FirstRcb) - HalDev->offset;
+      HalDev->RxActQueueTail[Ch]=LastRcb;
+      rmode=OldTailRcb->mode;
+      if (rmode&CB_EOQ_BIT)
+        {
+        rmode&=~CB_EOQ_BIT;
+        ((CPMAC_RX_HDP(  HalDev->dev_base  ,  Ch  )) )  = VirtToPhys(FirstRcb) - HalDev->offset;
+        OldTailRcb->mode=rmode;
+        }   
+      HalDev->OsFunc->CriticalOff();
+     }
+  }
+
+/**
+ *  @ingroup CPHAL_Functions
+ *  This function is called to indicate to the CPHAL that the upper layer
+ *  software has finished processing the receive data (given to it by
+ *  osReceive()).  The CPHAL will then return the appropriate receive buffers
+ *  and buffer descriptors to the available pool.
+ *
+ *  @param   HalReceiveInfo   Start of receive buffer descriptor chain returned to
+ *                      CPHAL.
+ *  @param   StripFlag  Flag indicating whether the upper layer software has
+ *                      retained ownership of the receive data buffers.
+ *<BR>
+ * 'FALSE' means  that the CPHAL can reuse the receive data buffers.
+ *<BR>
+ * 'TRUE' : indicates the data buffers were retained by the OS
+ *<BR>
+ * NOTE:  If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
+ *
+ *  @return EC_NO_ERRORS (ok). <BR>
+ *          Possible Error Codes:<BR>
+ *          @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
+ *          @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
+ *          @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
+ */
+static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
+            int StripFlag)
+  {
+   int Ch, i;
+   HAL_RCB *LastRcb;
+   HAL_DEVICE *HalDev;
+   int RcbSize;
+   int FragCount;
+
+   Ch = HalReceiveInfo->mode&0x0ff;
+   HalDev = (HAL_DEVICE *)HalReceiveInfo->Off_BLen;
+   FragCount = HalReceiveInfo->mode>>8;
+      
+   if (HalDev->State != enOpened)
+     return(EC_CPMAC |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
+
+   LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
+   LastRcb->HNext=0;
+   LastRcb->Next=0;
+   RcbSize = HalDev->ChData[Ch].RxBufSize;
+
+   if (FragCount>1)
+     {
+      LastRcb->Off_BLen=RcbSize;
+      LastRcb->mode=CB_OWNERSHIP_BIT;
+     }
+
+   HalReceiveInfo->Off_BLen=RcbSize;
+   HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
+
+   /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
+   if (StripFlag)
+     {
+      int rc=0;                                                      /*MJH+030417*/
+      int GoodCount=0;                                               /*GSG+030421*/       
+      HAL_RCB *TempRcb;
+      char *pBuf;
+      HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0;         /* +GSG 030421 */
+
+      TempRcb = HalReceiveInfo;
+      for (i=0; i<FragCount; i++)
+        {
+         if (TempRcb == 0)
+           {
+            dbgPrintf("Rx Return error while allocating new buffers\n");
+            dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
+              (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
+            osfuncSioFlush();
+
+            return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
+           }
+
+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
+                             0xF,HalDev->ChData[Ch].OsSetup,
+                             (void *)TempRcb,
+                             (void *)&TempRcb->OsInfo,
+                             (void *) HalDev->OsDev);
+         if (!pBuf)
+           {
+            /* malloc failed, add this RCB to Needs Buffer List */
+            (HAL_RCB *)TempRcb->Eop = TempRcb;                                  /* GSG +030430 */
+            TempRcb->mode=1<<8|Ch;
+            TempRcb->Off_BLen=(bit32u)HalDev;
+            
+            if(HalDev->NeedsCount < MAX_NEEDS)                                  /* +MJH 030410 */
+              {                                                                 /* +MJH 030410 */
+               HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
+               HalDev->NeedsCount++;                                            /* +MJH 030410 */
+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER);         /* ~MJH 030417 */
+              }                                                                 /* +MJH 030410 */
+             else                                                               /* +MJH 030410 */
+               rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED);              /* ~MJH 030417 */
+
+            /* requeue any previous RCB's that were ready to go before this one */
+            if (GoodCount > 0)                                                  /* +GSG 030421 */
+              {                                                                 /* +GSG 030421 */
+               LastGoodRcb->HNext=0;                                            /* +GSG 030430 */
+               LastGoodRcb->Next=0;                                             /* +GSG 030430 */
+               osfuncDataCacheHitWritebackAndInvalidate((void *)LastGoodRcb, 16);            /* +GSG 030430 */
+
+               AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);   /* +GSG 030421 */
+               GoodCount = 0;                                                   /* +GSG 030421 */
+              }                                                                 /* +GSG 030421 */
+
+            CurrHeadRcb = TempRcb->Next;                                        /* +GSG 030421 */
+           }
+          else                                                                  /* +GSG 030421 */
+           {                                                                    /* +GSG 030421 */
+            /* malloc succeeded, requeue the RCB to the hardware */
+            TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
+            TempRcb->DatPtr=pBuf;
+            /* Emerald fix 10/29 */
+            osfuncDataCacheHitWritebackAndInvalidate((void *)TempRcb, 16);
+
+            /* i store the last good RCB in case the malloc fails for the
+               next fragment.  This ensures that I can go ahead and return
+               a partial chain of RCB's to the hardware */
+            LastGoodRcb = TempRcb;                                              /* +GSG 030421 */
+            GoodCount++;                                                        /* +GSG 030421 */
+           }                                                                    /* +GSG 030421 */
+         TempRcb = TempRcb->Next;
+        } /*  end of Frag loop */
+      /* if there any good RCB's to requeue, do so here */
+      if (GoodCount > 0)                                                        /* +GSG 030421 */
+        {
+         AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch);          /* +GSG 030421 */
+        }
+      return(rc);                                                               /* ~GSG 030421 */
+     }
+   else
+     {
+      /*  Not Stripping */
+      /* Emerald */
+      /* Write Back SOP and last RCB */
+      osfuncDataCacheHitWritebackAndInvalidate((void *)HalReceiveInfo, 16);
+
+      if (FragCount > 1)
+        {
+         osfuncDataCacheHitWritebackAndInvalidate((void *)LastRcb, 16);
+        }
+      /* if not stripping buffers, always add to queue */
+      AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
+     }
+
+   return(EC_NO_ERRORS);
+  }
+
+/* +MJH 030410
+   Trys to liberate an RCB until liberation fails.
+   Note: If liberation fails then RxReturn will re-add the RCB to the
+         Needs list.
+*/
+static void NeedsCheck(HAL_DEVICE *HalDev)
+{
+    HAL_RECEIVEINFO* HalRcb;
+    int rc;
+    HalDev->OsFunc->CriticalOn();
+    while(HalDev->NeedsCount)
+      {
+      HalDev->NeedsCount--;
+      HalRcb = HalDev->Needs[HalDev->NeedsCount];
+      rc =  halRxReturn(HalRcb, 1);
+      /* short circuit if RxReturn starts to fail */
+      if (rc != 0)
+        break;
+      }
+    HalDev->OsFunc->CriticalOff();
+}
+
+/*
+ *  This function allocates transmit buffer descriptors (internal CPHAL function).
+ *  It creates a high priority transmit queue by default for a single Tx
+ *  channel.  If QoS is enabled for the given CPHAL device, this function
+ *  will also allocate a low priority transmit queue.
+ *
+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
+ *  @param   Ch       Channel number.
+ *
+ *  @return  0 OK, Non-Zero Not OK
+ */
+static int InitTcb(HAL_DEVICE *HalDev, int Ch)
+  {
+   int i, Num = HalDev->ChData[Ch].TxNumBuffers;
+   HAL_TCB *pTcb=0;
+   char *AllTcb;
+   int  tcbSize, Queue;
+   int SizeMalloc;
+
+   tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
+   SizeMalloc = (tcbSize*Num)+0xf;
+
+   for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
+     {
+      if (HalDev->TcbStart[Ch][Queue] == 0)
+        {
+
+         /* malloc all TCBs at once */
+         AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
+         if (!AllTcb)
+           {
+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
+           }
+
+         HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
+
+         /* keep this address for freeing later */
+         HalDev->TcbStart[Ch][Queue] = AllTcb;
+        }
+       else
+        {
+         /* if the memory has already been allocated, simply reuse it! */
+         AllTcb = HalDev->TcbStart[Ch][Queue];
+        }
+
+      /* align to cache line */
+      AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143  MJH~030522*/
+
+      /* default High priority transmit queue */
+      HalDev->TcbPool[Ch][Queue]=0;
+      for(i=0;i<Num;i++)
+        {
+         /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
+         pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
+         pTcb->mode=0;
+         pTcb->BufPtr=0;
+         pTcb->Next=HalDev->TcbPool[Ch][Queue];
+         pTcb->Off_BLen=0;
+         HalDev->TcbPool[Ch][Queue]=pTcb;
+        }
+      /*HalDev->TcbEnd = pTcb;*/
+     }
+
+   return(EC_NO_ERRORS);
+  }
+
+/*
+ *  This function allocates receive buffer descriptors (internal CPHAL function).
+ *  After allocation, the function 'queues' (gives to the hardware) the newly
+ *  created receive buffers to enable packet reception.
+ *
+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
+ *  @param   Ch    Channel number.
+ *
+ *  @return  0 OK, Non-Zero Not OK
+ */
+static int InitRcb(HAL_DEVICE *HalDev, int Ch)
+  {
+   int i, Num = HalDev->ChData[Ch].RxNumBuffers;
+   int Size = HalDev->ChData[Ch].RxBufSize;
+   HAL_RCB *pRcb;
+   char *pBuf;
+   char *AllRcb;
+   int  rcbSize;
+   int  DoMalloc = 0;
+   int SizeMalloc;
+   int MallocSize;
+
+   rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
+   SizeMalloc = (rcbSize*Num)+0xf;
+
+   if (HalDev->RcbStart[Ch] == 0)
+     {
+      DoMalloc = 1;
+
+      /* malloc all RCBs at once */
+      AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
+      if (!AllRcb)
+        {
+         return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
+        }
+
+      HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
+
+      /* keep this address for freeing later */
+      HalDev->RcbStart[Ch] = AllRcb;
+     }
+    else
+     {
+      /* if the memory has already been allocated, simply reuse it! */
+      AllRcb = HalDev->RcbStart[Ch];
+     }
+
+   /* align to cache line */
+   AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf);  /*PITS #143  MJH~030522*/
+
+   HalDev->RcbPool[Ch]=0;
+   for(i=0;i<Num;i++)
+     {
+      pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
+
+      if (DoMalloc == 1)
+        {
+
+         MallocSize = Size;                                       /*~3.01 */
+         pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
+         if(!pBuf)
+             {
+            return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
+             }
+           /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
+         pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
+         pRcb->DatPtr=pBuf;
+        }
+      pRcb->mode=(1<<8)|Ch; /* One Frag for Ch */
+      pRcb->Next=(void *)HalDev->RcbPool[Ch];
+      pRcb->Off_BLen=(bit32u)HalDev;
+      HalDev->RcbPool[Ch]=pRcb;
+     }
+
+   /* Give all of the Rx buffers to hardware */
+
+   while(HalDev->RcbPool[Ch])
+     {
+      pRcb=HalDev->RcbPool[Ch];
+      HalDev->RcbPool[Ch]=pRcb->Next;
+      pRcb->Eop=(void*)pRcb;
+      pRcb->mode=(1<<8)|Ch;
+      halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
+     }
+
+   return(EC_NO_ERRORS);
+  }
+
+/**
+ *  @ingroup CPHAL_Functions
+ *  This function transmits the data in FragList using available transmit
+ *  buffer descriptors.  More information on the use of the Mode parameter
+ *  is available in the module-specific appendices.  Note:  The OS should
+ *  not call Send() for a channel that has been requested to be torndown.
+ *
+ *  @param   HalDev      CPHAL module instance. (set by cphalInitModule())
+ *  @param   FragList    Fragment List structure.
+ *  @param   FragCount   Number of fragments in FragList.
+ *  @param   PacketSize  Number of bytes to transmit.
+ *  @param   OsSendInfo  OS Send Information structure. <BR>
+ *  @param   Mode        32-bit value with the following bit fields: <BR>
+ *                       31-16: Mode  (used for module specific data). <BR>
+ *                       15-08: Queue (transmit queue to send on). <BR>
+ *                       07-00: Channel (channel number to send on).
+ *
+ *  @return  EC_NO_ERRORS (ok). <BR>
+ *           Possible Error Codes:<BR>
+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
+ *           @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
+ *           @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
+ *           @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
+ */
+static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
+                      int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
+                      bit32u Mode)
+  {
+  HAL_TCB *tcb_ptr, *head;
+  int i;
+  int rc = EC_NO_ERRORS;
+  int Ch = Mode & 0xFF;
+  int Queue = (Mode>>8)&0xFF;
+  /*int DoThresholdCheck=1;  */ /* Used when TxIntDisable is set and TxInts are re-enabled */
+  
+  if (HalDev->State != enOpened)
+     return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
+
+  if (!HalDev->Linked)
+    {
+     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NOT_LINKED;
+     return(rc);
+    }
+
+  if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)                    /*MJH~030611*/ /*PITS 148*/
+    return(EC_CPMAC |EC_FUNC_SEND|EC_VAL_INVALID_CH);              /*+GSG 030303*/
+
+  HalDev->OsFunc->CriticalOn();
+
+  /* Setup Tx mode and size */
+  if (PacketSize<60)
+    {
+     FragList[FragCount-1].len += (60 - PacketSize);              /*MJH~030506*//*PITS 132*/
+     PacketSize = 60;                                             /*MJH~030506*/
+    }
+  Mode &= CB_PASSCRC_BIT;
+
+  tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
+
+  if (tcb_ptr)
+    {
+
+     Mode|=PacketSize|CB_SOF_BIT|CB_OWNERSHIP_BIT;
+
+     for (i=0; i<FragCount; i++)
+
+       {
+        /* Setup Tx mode and size */
+        tcb_ptr->Off_BLen = FragList[i].len;
+        
+        tcb_ptr->mode     = Mode;
+        tcb_ptr->BufPtr   = VirtToPhys((bit32 *)FragList[i].data) - HalDev->offset;
+        tcb_ptr->OsInfo = OsSendInfo;
+
+        if (i == (FragCount - 1))
+          {
+           /* last fragment */
+           tcb_ptr->mode |= CB_EOF_BIT;
+
+           /* since this is the last fragment, set the TcbPool pointer before
+              nulling out the Next pointers */
+
+           HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
+
+           tcb_ptr->Next = 0;
+           tcb_ptr->HNext = 0;
+
+           /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
+              so we can save that information in the SOP */
+           head->Eop = tcb_ptr;
+
+           /* Emerald fix 10/29 */
+       osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
+
+          }
+         else
+          {
+           Mode=CB_OWNERSHIP_BIT;
+           tcb_ptr->HNext    = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
+        
+           /* Emerald fix 10/29 */
+           osfuncDataCacheHitWritebackAndInvalidate((void *)tcb_ptr, 16);
+
+           tcb_ptr = tcb_ptr->Next;  /* what about the end of TCB list?? */
+
+           if (tcb_ptr == 0)
+             {
+              rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
+              goto ExitSend;
+             }
+          }
+       } /* for */
+
+     /* put it on the high priority queue */
+     if (HalDev->TxActQueueHead[Ch][Queue] == 0)
+       {
+        HalDev->TxActQueueHead[Ch][Queue]=head;
+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
+/*+GSG 030303*//*+GSG 030303*/
+        if (!HalDev->TxActive[Ch][Queue])
+          {
+
+              bit32u base = HalDev->dev_base;
+              
+              /* write CPPI TX HDP */
+              (CPMAC_TX_HDP( base , Ch ))  = VirtToPhys(head)  - HalDev->offset;
+              HalDev->TxActive[Ch][Queue]=TRUE;
+
+          }
+       }
+      else
+       {
+	    register volatile HAL_TCB *pTailTcb;   
+        register bit32u tmode;
+        register bit32u pCurrentTcb;
+        
+        HalDev->TxActQueueTail[Ch][Queue]->Next=head;
+        /* Emerald fix 10/29 */
+        
+        pTailTcb=(HAL_TCB *)VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext);
+        pCurrentTcb=VirtToPhys(head)  - HalDev->offset;
+        pTailTcb->HNext=pCurrentTcb;
+        HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
+/*+GSG 030303*/
+        tmode=pTailTcb->mode;  
+        if (tmode&CB_EOQ_BIT)
+          {
+           bit32u base = HalDev->dev_base;
+
+           tmode&=~CB_EOQ_BIT;
+           pTailTcb->mode=tmode;
+           ((CPMAC_TX_HDP( base , Ch )) )  = pCurrentTcb;
+          }
+
+        else
+          {
+           if(HalDev->TxIntDisable)
+             {
+              /*  Enable Interrupts, to ensure packet goes out on wire */
+              CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); 
+              halPacketProcessEnd(HalDev); /* Allow Interrupt to be seen at the OS */
+              /*DoThresholdCheck = 0; */       /* Disable Threshold Check */
+
+             }       
+          }
+
+       }
+     rc = EC_NO_ERRORS;
+     goto ExitSend;
+    } /* if (tcb_ptr) */
+   else
+    {
+     rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
+     goto ExitSend;
+    }
+ExitSend:
+
+/* 15 June 2004 - NSP Performance Update : If Tx Ints are disabled then process them here */
+/* 29 June 2004 - NSP Performance Update : Moved to end at request of BCIL */
+/* 23 Aug  2004 - NSP Performance Update : If Tx Ints are re-enabled do not do Threshold check */
+
+   if(HalDev->TxIntDisable /*&& DoThresholdCheck*/)
+   {
+      if(--HalDev->TxIntThreshold[Ch] <= 0)
+      {
+          int MoreWork;
+          TxInt(HalDev, Ch, 0, &MoreWork);
+          HalDev->TxIntThreshold[Ch] = HalDev->TxIntThresholdMaster[Ch];
+      }
+   }
+    HalDev->OsFunc->CriticalOff();
+
+   return(rc);
+  }
+
+/*
+ *  This function processes receive interrupts.  It traverses the receive
+ *  buffer queue, extracting the data and passing it to the upper layer software via
+ *  osReceive().  It handles all error conditions and fragments without valid data by
+ *  immediately returning the RCB's to the RCB pool.
+ *
+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
+ *  @param   Ch       Channel Number.
+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
+ *
+ *  @return  0 if OK, non-zero otherwise.
+ */
+static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
+  {
+  HAL_RCB *CurrentRcb, *SopRcb, *EofRcb, *EopRcb;
+  bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
+    FrmFrags, TotalFrags, FrmLen;
+  int base = HalDev->dev_base, Ret;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+  int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
+  int FragIndex; /* +GSG 030508 */
+  
+  if(HalDev->NeedsCount) /* +MJH 030410 */
+    NeedsCheck(HalDev);  /* +MJH 030410 */
+
+  /* Handle case of teardown interrupt */
+  if (HalDev->RxTeardownPending[Ch] != 0)
+    {
+     Ret = RxTeardownInt(HalDev, Ch);
+     if (Ret == 0)
+       {                                                              /*+GSG 030303*/
+        *MoreWork = 0;
+        return (EC_NO_ERRORS);
+       }                                                              /*+GSG 030303*/
+    }
+
+  /* Examine first RCB on the software active queue */
+  CurrentRcb=HalDev->RxActQueueHead[Ch];
+  osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
+  RxBufStatus=CurrentRcb->mode;
+  PacketsServiced=0;
+  
+  /* Process received packets until we find hardware owned descriptors
+     or until we hit RxServiceMax */
+  while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
+    (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
+    {
+
+     PacketsServiced++; /* ~GSG 030307 */
+     SopRcb=CurrentRcb;
+     RxSopStatus=RxBufStatus;
+     RxPktLen = RxSopStatus&CB_SIZE_MASK;
+    
+     FrmFrags=0;
+     TotalFrags=0;
+     FragIndex=0;
+     FrmLen=0;
+     EofRcb=0;
+
+/* +GSG 030508 *//* +GSG 030508 */
+
+     /* Loop through all fragments that comprise current packet.  Build
+        fraglist and exit when the end of the packet is reached, or the
+        end of the descriptor list is reached. */
+     do
+       {
+	    bit32u DmaLen;
+	   
+
+        DmaLen=CurrentRcb->Off_BLen;
+
+        FrmLen+=DmaLen;
+        TotalFrags++;
+        if (!EofRcb)
+          {
+           HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr);       /* ~GSG 030508 */
+
+           HalDev->fraglist[FragIndex].len=DmaLen;                              /* ~GSG 030508 */
+
+           /* GSG 12/9 */
+           HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo;             /* ~GSG 030508 */
+
+           /* Upper layer must do the data invalidate */ 
+
+           FrmFrags++;
+           FragIndex++;                                                         /* ~GSG 030508 */
+           if (FrmLen>=RxPktLen)
+             EofRcb=CurrentRcb;
+          }
+        EopRcb=CurrentRcb;
+        CurrentRcb=EopRcb->Next;
+        if (CurrentRcb)
+          {
+           osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
+          }
+       }while(((EopRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
+     
+     /* Write the completion pointer for interrupt acknowledgement*/
+     (CPMAC_RX_INT_ACK( base , Ch ))  = VirtToPhys(EopRcb) - HalDev->offset;
+
+     EopRcb->Next=0;
+
+     if (CurrentRcb == 0)
+       { 
+	    /* If we are out of RCB's we must not send this packet
+	       to the OS. */
+        int RcbSize = HalDev->ChData[Ch].RxBufSize;
+
+        if (TotalFrags>1)
+          {
+           EopRcb->Off_BLen=RcbSize;
+           EopRcb->mode=CB_OWNERSHIP_BIT;
+           osfuncDataCacheHitWritebackAndInvalidate((void *)EopRcb, 16);
+          }
+
+        SopRcb->Off_BLen=RcbSize;
+        SopRcb->mode=CB_OWNERSHIP_BIT;   
+        osfuncDataCacheHitWritebackAndInvalidate((void *)SopRcb, 16);
+      
+        ((CPMAC_RX_HDP( base , Ch )) )  = VirtToPhys(SopRcb);
+       }
+      else
+       { 
+	    /* Dequeue packet and send to OS */
+        int mode;
+
+        /* setup SopRcb for the packet */
+        SopRcb->Eop=(void*)EopRcb;
+
+        /* dequeue packet */
+        HalDev->RxActQueueHead[Ch]=CurrentRcb;
+        
+        if (EopRcb->mode&CB_EOQ_BIT)
+          {
+	       /* Next pointer is non-null and EOQ bit is set, which
+	          indicates misqueue packet in CPPI protocol. */
+
+           ((CPMAC_RX_HDP( base , Ch )) )  = EopRcb->HNext;
+          }
+        
+        mode = (SopRcb->mode & 0xFFFF0000) | Ch;
+
+        SopRcb->mode=(FrmFrags<<8)|Ch;
+        SopRcb->Off_BLen=(bit32u)HalDev;
+        
+        /* send packet up the higher layer driver */
+        OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen,             /* ~GSG 030508 */
+                       (HAL_RECEIVEINFO *)SopRcb,mode);
+    
+        RxBufStatus=CurrentRcb->mode;          
+       }
+    } /* while loop */
+      
+  if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
+    {
+     *MoreWork = 1;
+    }
+   else
+    {
+     *MoreWork = 0;
+    }
+
+  return (EC_NO_ERRORS);
+}
+
+/*
+ *  This function processes transmit interrupts.  It traverses the
+ *  transmit buffer queue, detecting sent data buffers and notifying the upper
+ *  layer software via osSendComplete().  (for SAR, i originally had this split
+ *  into two functions, one for each queue, but joined them on 8/8/02)
+ *
+ *  @param   HalDev   CPHAL module instance. (set by cphalInitModule())
+ *  @param   Queue    Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
+ *  @param   MoreWork Flag that indicates that there is more work to do when set to 1.
+ *
+ *  @return  0 if OK, non-zero otherwise.
+ */
+int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
+  {
+  HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
+  int PacketsServiced;
+  bit32u TxFrameStatus;
+  int base;
+  int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+
+/*+GSG 030303*//*+GSG 030303*/
+
+  /* load the module base address */
+  base = HalDev->dev_base;
+  
+  /* Handle case of teardown interrupt.  This must be checked at
+     the top of the function rather than the bottom, because
+     the normal data processing can wipe out the completion
+     pointer which is used to determine teardown complete. */
+  if (HalDev->TxTeardownPending[Ch] != 0)
+    {
+	 int Ret;
+	 
+     Ret = TxTeardownInt(HalDev, Ch, Queue);
+     if (Ret == 0)
+       {                                                              /*+GSG 030303*/
+        *MoreWork = 0; /* bug fix 1/6 */                              /*+GSG 030303*/
+        return (EC_NO_ERRORS);
+       }                                                              /*+GSG 030303*/
+    }
+
+  OsFunc->CriticalOn(); /*  240904 */
+
+  CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
+  FirstTcbProcessed=CurrentTcb;
+
+  if (CurrentTcb==0)
+    {
+     /* I saw this error a couple of times when multi-channels were added */
+     dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
+     dbgPrintf("              Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
+     dbgPrintf("              HalDev = 0x%08x\n", (bit32u)HalDev);
+     osfuncSioFlush();
+     OsFunc->CriticalOff(); 
+     return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
+    }
+
+  osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
+  TxFrameStatus=CurrentTcb->mode;
+  PacketsServiced=0;
+
+  /* should the ownership bit check be inside of the loop?? could make it a
+     while-do loop and take this check away */
+  if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
+    {
+    do
+      {
+      /* Pop TCB(s) for packet from the stack */
+      LastTcbProcessed=CurrentTcb->Eop;
+
+      /* new location for acknowledge */
+      /* Write the completion pointer */
+      (CPMAC_TX_INT_ACK( base , Ch ))  = VirtToPhys(LastTcbProcessed) - HalDev->offset;
+
+      HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
+
+/*+GSG 030303*//*+GSG 030303*/
+
+      osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
+
+      if (LastTcbProcessed->mode&CB_EOQ_BIT)
+        {
+         if (LastTcbProcessed->Next)
+           {
+            /* Misqueued packet */
+
+               (CPMAC_TX_HDP( base , Ch ))  = LastTcbProcessed->HNext;
+
+           }
+          else
+           {
+       /* Tx End of Queue */
+
+            HalDev->TxActive[Ch][Queue]=FALSE;
+           }
+        }
+
+      OsFunc->SendComplete(CurrentTcb->OsInfo);
+
+      /* Push Tcb(s) back onto the stack */
+      CurrentTcb = LastTcbProcessed->Next;
+
+      LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
+
+      HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
+
+      PacketsServiced++;
+
+      TxFrameStatus=CB_OWNERSHIP_BIT;
+      /* set the first(SOP) pointer for the next packet */
+      FirstTcbProcessed = CurrentTcb;
+      if (CurrentTcb)
+        {
+         osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
+         TxFrameStatus=CurrentTcb->mode;
+        }
+
+      }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
+             &&(PacketsServiced<TxServiceMax));
+
+    if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
+             &&(PacketsServiced==TxServiceMax))
+      {
+       *MoreWork = 1;
+      }
+     else
+      {
+       *MoreWork = 0;
+      }
+    }
+    OsFunc->CriticalOff(); 
+
+  return(EC_NO_ERRORS);
+  }
+
+/**
+ *  @ingroup CPHAL_Functions
+ *  This function performs a teardown for the given channel.  The value of the
+ *  Mode parameter controls the operation of the function, as documented below.
+ *
+ *  Note: If bit 3 of Mode is set, this call is blocking, and will not return
+ *  until the teardown interrupt has occurred and been processed. While waiting
+ *  for a blocking teardown to complete, ChannelTeardown() will signal the OS
+ *  (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
+ *  necessary.  If and only if bit 3 of Mode is clear, the CPHAL will call the
+ *  OS TeardownComplete() function to indicate that the teardown has completed.
+ *
+ *  @param   HalDev  CPHAL module instance. (set by xxxInitModule())
+ *  @param   Ch      Channel number.
+ *  @param   Mode    Bit 0 (LSB): Perform Tx teardown (if set).<BR>
+ *                   Bit 1: Perform Rx teardown (if set). <BR>
+ *                   Bit 2: If set, perform full teardown (free buffers/descriptors).
+ *                          If clear, perform partial teardown (keep buffers). <BR>
+ *                   Bit 3 (MSB): If set, call is blocking.
+ *                            If clear, call is non-blocking.
+ *
+ *  @return  EC_NO_ERRORS (ok). <BR>
+ *           Possible Error Codes:<BR>
+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
+ *           @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
+ *           @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
+ *           @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
+ *           @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
+ *           @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
+ *           @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
+ *           @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
+ *           @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
+ */
+static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
+  {
+   int DoTx, DoRx, Sleep=2048, timeout=0;                         /*MJH~030306*/
+   bit32u base = HalDev->dev_base;
+
+/* Set the module, used for error returns */
+
+   DoTx = (Mode & TX_TEARDOWN);
+   DoRx = (Mode & RX_TEARDOWN);
+
+   if (HalDev->State < enInitialized)
+     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
+
+   if ((Ch < 0) || (Ch > (MAX_CHAN-1) ))
+     {
+     return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
+     }
+
+   /* set teardown pending bits before performing the teardown, because they
+      will be used in the int handler (this is done for AAL5) */
+   if (DoTx)
+     {
+      if (HalDev->TxTeardownPending[Ch] != 0)
+        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
+
+      /* If a full teardown, this also means that the user must
+      setup all channels again to use them */
+      if (Mode & FULL_TEARDOWN)
+        HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
+
+      if (HalDev->State < enOpened)
+        {
+         /* if the hardware has never been opened, the channel has never actually
+         been setup in the hardware, so I just need to reset the software flag
+         and leave */
+         HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
+         return (EC_NO_ERRORS);
+    }
+       else
+    {
+         if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
+       {
+            return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
+       }
+
+         /* set teardown flag */
+         HalDev->TxTeardownPending[Ch] = Mode;
+    }
+     }
+
+   if (DoRx)
+     {
+      if (HalDev->RxTeardownPending[Ch] != 0)
+        return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
+
+      if (Mode & FULL_TEARDOWN)
+        HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
+
+      if (HalDev->State < enOpened)
+        {
+         HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
+         return (EC_NO_ERRORS);
+    }
+       else
+    {
+         if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
+           return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
+
+         HalDev->RxTeardownPending[Ch] = Mode;
+    }
+     }
+
+   /* Perform Tx Teardown Duties */
+   if ((DoTx) && (HalDev->State == enOpened))
+     {
+      /* Request TX channel teardown */
+      (CPMAC_TX_TEARDOWN( base ))  = Ch;
+
+      /* wait until teardown has completed */
+      if (Mode & BLOCKING_TEARDOWN)
+        {
+     timeout = 0;
+         while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
+       {
+            osfuncSleep(&Sleep);
+
+            timeout++;
+        if (timeout > 100000)
+          {
+               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
+          }
+       }
+    }
+     } /* if DoTx */
+
+   /* Perform Rx Teardown Duties */
+   if ((DoRx) && (HalDev->State == enOpened))
+     {
+
+      /* perform CPMAC specific RX channel teardown */
+      CPMAC_RX_TEARDOWN(base) = Ch;
+
+      if (Mode & BLOCKING_TEARDOWN)
+        {
+     timeout = 0;
+         while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
+       {
+            osfuncSleep(&Sleep);
+
+            timeout++;
+        if (timeout > 100000)
+          {
+               return(EC_CPMAC |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
+          }
+       }
+        }
+     } /* if DoRx */
+
+   return (EC_NO_ERRORS);
+  }
+
+/**
+ *  @ingroup CPHAL_Functions
+ *  This function closes the CPHAL module.  The module will be reset.
+ *  The Mode parameter should be used to determine the actions taken by
+ *  Close().
+ *
+ *  @param   HalDev   CPHAL module instance. (set by xxxInitModule())
+ *  @param   Mode     Indicates actions to take on close.  The following integer
+ *                    values are valid: <BR>
+ *                    1:  Does not free buffer resources, init parameters remain
+ *                        intact.  User can then call Open() without calling Init()
+ *                        to attempt to reset the device and bring it back to the
+ *                        last known state.<BR>
+ *                    2:  Frees the buffer resources, but keeps init parameters.  This
+ *                        option is a more aggressive means of attempting a device reset.
+ *                    3:  Frees the buffer resources, and clears all init parameters. <BR>
+ *                        At this point, the caller would have to call to completely
+ *                        reinitialize the device (Init()) before being able to call
+ *                        Open().  Use this mode if you are shutting down the module
+ *                        and do not plan to restart.
+ *
+ *  @return  EC_NO_ERRORS (ok).<BR>
+ *           Possible Error Codes:<BR>
+ *           @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
+ *           Any error code from halChannelTeardown().<BR>
+ */
+static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
+  {
+   int Ch, Inst, Ret;
+   OS_DEVICE *TmpOsDev;
+   OS_FUNCTIONS *TmpOsFunc;
+   HAL_FUNCTIONS *TmpHalFunc;
+   char *TmpDeviceInfo;
+
+   int Ticks;                                                     /*MJH~030306*/
+
+   /* Verify proper device state */
+   if (HalDev->State != enOpened)
+     return (EC_CPMAC  | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
+
+   /* Teardown all open channels */
+   for (Ch = 0; Ch <= (MAX_CHAN-1) ; Ch++)
+     {
+      if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
+        {
+         if (Mode == 1)
+           {
+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
+            if (Ret) return (Ret);
+           }
+          else
+           {
+            Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
+            if (Ret) return (Ret);
+           }
+        }
+
+      if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
+        {
+         if (Mode == 1)
+           {
+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
+            if (Ret) return (Ret);
+           }
+          else
+           {
+            Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
+            if (Ret) return (Ret);
+           }
+        }
+     }
+
+   /* free fraglist in HalDev */
+   HalDev->OsFunc->Free(HalDev->fraglist);
+   HalDev->fraglist = 0;
+
+   /* unregister the interrupt */
+   HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
+
+   Ticks = 0;    /* Disable Tick Timer */                           /*MJH+030306*/
+   HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcClear, &Ticks); /*MJH+030306*/
+
+   /* Free the Phy Information Structure */
+   if(HalDev->PhyDev)
+   {
+      HalDev->OsFunc->Free(HalDev->PhyDev);                               /*MJH+030513*/
+      HalDev->PhyDev = 0;                                         /*MJH+030522*/
+   }
+
+   /* Perform CPMAC specific closing functions */
+   CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
+   CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
+   CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
+
+   /* put device back into reset */
+   (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit);
+   Ticks = 64;                                                    /*MJH~030306*/
+   osfuncSleep(&Ticks);
+
+   /* If mode is 3, than clear the HalDev and set next state to DevFound*/
+   if (Mode == 3)
+     {
+      /* I need to keep the HalDev parameters that were setup in InitModule */
+      TmpOsDev = HalDev->OsDev;
+      TmpOsFunc = HalDev->OsFunc;
+      TmpDeviceInfo = HalDev->DeviceInfo;
+
+      TmpHalFunc = HalDev->HalFuncPtr;
+      Inst = HalDev->Inst;
+
+      /* Clear HalDev */
+
+      HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
+
+      /* Restore key parameters */
+      HalDev->OsDev = TmpOsDev;
+      HalDev->OsFunc = TmpOsFunc;
+      HalDev->DeviceInfo = TmpDeviceInfo;
+
+      HalDev->HalFuncPtr = TmpHalFunc;
+      HalDev->Inst = Inst;
+
+      HalDev->State = enDevFound;
+     }
+    else
+     {
+      HalDev->State = enInitialized;
+     }
+
+   return(EC_NO_ERRORS);
+  }
diff -urN linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c
--- linux.old/drivers/net/avalanche_cpmac/cpremap_cpmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpremap_cpmac.c	2005-07-12 02:48:42.049593000 +0200
@@ -0,0 +1,28 @@
+#ifndef _INC_CPREMAP_C
+#define _INC_CPREMAP_C
+
+#ifdef __ADAM2
+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
+  {
+  asm(" cache  17, (%0)" : : "r" (ptr));
+  }
+
+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
+  { 
+  asm(" cache  25, (%0)" : : "r" (ptr));
+  }
+  
+static inline void osfuncDataCacheHitWritebackAndInvalidate(void *ptr, int Size)
+  { 
+  asm(" cache  21, (%0)" : : "r" (ptr));
+  }
+
+#else
+
+#define osfuncDataCacheHitInvalidate(MemPtr, Size)               __asm__(" .set mips3; cache  17, (%0); .set mips0" : : "r" (MemPtr))
+#define osfuncDataCacheHitWritebackAndInvalidate(MemPtr, Size)   __asm__(" .set mips3; cache  21, (%0); .set mips0" : : "r" (MemPtr))
+#define osfuncDataCacheHitWriteback(MemPtr, Size)                __asm__(" .set mips3; cache  25, (%0); .set mips0" : : "r" (MemPtr))      
+            
+#endif
+
+#endif
diff -urN linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h
--- linux.old/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/cpswhal_cpmac.h	2005-07-12 02:48:42.050593000 +0200
@@ -0,0 +1,632 @@
+/************************************************************************
+ *  TNETDxxxx Software Support
+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
+ *
+ *  FILE: cphal.h
+ *
+ *  DESCRIPTION:
+ *      User include file, contains data definitions shared between the CPHAL
+ *      and the upper-layer software.
+ *
+ *  HISTORY:
+ *      Date      Modifier  Ver    Notes
+ *      28Feb02   Greg      1.00   Original
+ *      06Mar02   Greg      1.01   Documentation enhanced
+ *      18Jul02   Greg      1.02   Many updates (OAM additions, general reorg)
+ *      22Nov02   Mick      RC2    Additions from Denis' input on Control
+ *
+ *  author  Greg Guyotte
+ *  version 1.02
+ *  date    18-Jul-2002
+ *****************************************************************************/
+#ifndef _INC_CPHAL_H
+#define _INC_CPHAL_H
+
+#ifdef _CPHAL_CPMAC
+#include "ec_errors_cpmac.h"
+#endif
+
+#ifdef _CPHAL_AAL5
+#include "ec_errors_cpaal5.h"
+#endif
+
+#ifdef _CPHAL_CPSAR
+#include "ec_errors_cpsar.h"
+#endif
+
+#ifdef _CPHAL_AAL2
+#include "ec_errors_cpaal2.h"
+#endif
+
+#ifndef __ADAM2
+typedef char           bit8;
+typedef short          bit16;
+typedef int            bit32;
+
+typedef unsigned char  bit8u;
+typedef unsigned short bit16u;
+typedef unsigned int   bit32u;
+
+/*
+typedef char           INT8;
+typedef short          INT16;
+typedef int            INT32;
+typedef unsigned char  UINT8;
+typedef unsigned short UINT16;
+typedef unsigned int   UINT32;
+*/
+/*typedef unsigned int   size_t;*/
+#endif
+
+#ifdef _CPHAL
+
+#ifndef TRUE
+#define TRUE (1==1)
+#endif
+
+#ifndef FALSE
+#define FALSE (1==2)
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#endif
+
+#define        VirtToPhys(a)                 (((int)a)&~0xe0000000)
+#define        VirtToVirtNoCache(a)          ((void*)((VirtToPhys(a))|0xa0000000))
+#define        VirtToVirtCache(a)            ((void*)((VirtToPhys(a))|0x80000000))
+#define        PhysToVirtNoCache(a)          ((void*)(((int)a)|0xa0000000))
+#define        PhysToVirtCache(a)            ((void*)(((int)a)|0x80000000))
+/*
+#define        DataCacheHitInvalidate(a)     {__asm__(" cache  17, (%0)" :   : "r" (a));}
+#define        DataCacheHitWriteback(a)      {__asm__(" cache  25, (%0)" :   : "r" (a));}
+*/
+
+#define PARTIAL 1     /**< Used in @c Close() and @c ChannelTeardown() */
+#define FULL 2        /**< Used in @c Close() and @c ChannelTeardown() */
+
+/* Channel Teardown Defines */
+#define RX_TEARDOWN 2
+#define TX_TEARDOWN 1
+#define BLOCKING_TEARDOWN 8
+#define FULL_TEARDOWN 4
+#define PARTIAL_TEARDOWN 0
+
+#define MAX_DIR 2
+#define DIRECTION_TX 0
+#define DIRECTION_RX 1
+#define TX_CH 0
+#define RX_CH 1
+#define HAL_ERROR_DEVICE_NOT_FOUND    1
+#define HAL_ERROR_FAILED_MALLOC       2
+#define HAL_ERROR_OSFUNC_SIZE         3
+#define HAL_DEFAULT  0xFFFFFFFF
+#define VALID(val)    (val!=HAL_DEFAULT)
+
+/*
+ERROR REPORTING
+
+HAL Module Codes.  Each HAL module reporting an error code
+should OR the error code with the respective Module error code
+from the list below.
+*/
+#define EC_AAL5                                EC_HAL|EC_DEV_AAL5
+#define EC_AAL2                                EC_HAL|EC_DEV_AAL2
+#define EC_CPSAR                               EC_HAL|EC_DEV_CPSAR
+#define EC_CPMAC                               EC_HAL|EC_DEV_CPMAC
+#define EC_VDMA                                EC_HAL|EC_DEV_VDMA
+#define EC_VLYNQ                               EC_HAL|EC_DEV_VLYNQ
+#define EC_CPPI                                EC_HAL|EC_DEV_CPPI
+
+/*
+HAL Function Codes.  Each HAL module reporting an error code
+should OR the error code with one of the function codes from
+the list below.
+*/
+#define EC_FUNC_HAL_INIT                       EC_FUNC(1)
+#define EC_FUNC_CHSETUP                        EC_FUNC(2)
+#define EC_FUNC_CHTEARDOWN                     EC_FUNC(3)
+#define EC_FUNC_RXRETURN                       EC_FUNC(4)
+#define EC_FUNC_SEND                           EC_FUNC(5)
+#define EC_FUNC_RXINT                          EC_FUNC(6)
+#define EC_FUNC_TXINT                          EC_FUNC(7)
+#define EC_FUNC_AAL2_VDMA                      EC_FUNC(8)
+#define EC_FUNC_OPTIONS                        EC_FUNC(9)
+#define EC_FUNC_PROBE                          EC_FUNC(10)
+#define EC_FUNC_OPEN                           EC_FUNC(11)
+#define EC_FUNC_CONTROL                        EC_FUNC(12)
+#define EC_FUNC_DEVICE_INT                     EC_FUNC(13)
+#define EC_FUNC_STATUS                         EC_FUNC(14)
+#define EC_FUNC_TICK                           EC_FUNC(15)
+#define EC_FUNC_CLOSE                          EC_FUNC(16)
+#define EC_FUNC_SHUTDOWN                       EC_FUNC(17)
+#define EC_FUNC_DEVICE_INT_ALT                 EC_FUNC(18) /* +GSG 030306 */
+
+/*
+HAL Error Codes.  The list below defines every type of error
+used in all HAL modules. DO NOT CHANGE THESE VALUES!  Add new
+values in integer order to the bottom of the list.
+*/
+#define EC_VAL_PDSP_LOAD_FAIL                 EC_ERR(0x01)|EC_CRITICAL
+#define EC_VAL_FIRMWARE_TOO_LARGE             EC_ERR(0x02)|EC_CRITICAL
+#define EC_VAL_DEVICE_NOT_FOUND               EC_ERR(0x03)|EC_CRITICAL
+#define EC_VAL_BASE_ADDR_NOT_FOUND            EC_ERR(0x04)|EC_CRITICAL
+#define EC_VAL_RESET_BIT_NOT_FOUND            EC_ERR(0x05)|EC_CRITICAL
+#define EC_VAL_CH_INFO_NOT_FOUND              EC_ERR(0x06)
+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED       EC_ERR(0x07)|EC_CRITICAL
+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED       EC_ERR(0x08)|EC_CRITICAL
+#define EC_VAL_MALLOC_DEV_FAILED              EC_ERR(0x09)
+#define EC_VAL_OS_VERSION_NOT_SUPPORTED       EC_ERR(0x0A)|EC_CRITICAL
+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED    EC_ERR(0x0B)|EC_CRITICAL
+#define EC_VAL_NULL_CPSAR_DEV                 EC_ERR(0x0C)|EC_CRITICAL
+
+#define EC_VAL_LUT_NOT_READY                  EC_ERR(0x0D)
+#define EC_VAL_INVALID_CH                     EC_ERR(0x0E)
+#define EC_VAL_NULL_CH_STRUCT                 EC_ERR(0x0F)
+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND       EC_ERR(0x10)
+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND       EC_ERR(0x11)
+#define EC_VAL_RX_CH_ALREADY_TORNDOWN         EC_ERR(0x12)
+#define EC_VAL_TX_CH_ALREADY_TORNDOWN         EC_ERR(0x13)
+#define EC_VAL_TX_TEARDOWN_TIMEOUT            EC_ERR(0x14)
+#define EC_VAL_RX_TEARDOWN_TIMEOUT            EC_ERR(0x15)
+#define EC_VAL_CH_ALREADY_TORNDOWN            EC_ERR(0x16)
+#define EC_VAL_VC_SETUP_NOT_READY             EC_ERR(0x17)
+#define EC_VAL_VC_TEARDOWN_NOT_READY          EC_ERR(0x18)
+#define EC_VAL_INVALID_VC                     EC_ERR(0x19)
+#define EC_VAL_INVALID_LC                     EC_ERR(0x20)
+#define EC_VAL_INVALID_VDMA_CH                EC_ERR(0x21)
+#define EC_VAL_INVALID_CID                    EC_ERR(0x22)
+#define EC_VAL_INVALID_UUI                    EC_ERR(0x23)
+#define EC_VAL_INVALID_UUI_DISCARD            EC_ERR(0x24)
+#define EC_VAL_CH_ALREADY_OPEN                EC_ERR(0x25)
+
+#define EC_VAL_RCB_MALLOC_FAILED              EC_ERR(0x26)
+#define EC_VAL_RX_BUFFER_MALLOC_FAILED        EC_ERR(0x27)
+#define EC_VAL_OUT_OF_TCBS                    EC_ERR(0x28)
+#define EC_VAL_NO_TCBS                        EC_ERR(0x29)
+#define EC_VAL_NULL_RCB                       EC_ERR(0x30)|EC_CRITICAL
+#define EC_VAL_SOP_ERROR                      EC_ERR(0x31)|EC_CRITICAL
+#define EC_VAL_EOP_ERROR                      EC_ERR(0x32)|EC_CRITICAL
+#define EC_VAL_NULL_TCB                       EC_ERR(0x33)|EC_CRITICAL
+#define EC_VAL_CORRUPT_RCB_CHAIN              EC_ERR(0x34)|EC_CRITICAL
+#define EC_VAL_TCB_MALLOC_FAILED              EC_ERR(0x35)
+
+#define EC_VAL_DISABLE_POLLING_FAILED         EC_ERR(0x36)
+#define EC_VAL_KEY_NOT_FOUND                  EC_ERR(0x37)
+#define EC_VAL_MALLOC_FAILED                  EC_ERR(0x38)
+#define EC_VAL_RESET_BASE_NOT_FOUND           EC_ERR(0x39)|EC_CRITICAL
+#define EC_VAL_INVALID_STATE                  EC_ERR(0x40)
+#define EC_VAL_NO_TXH_WORK_TO_DO              EC_ERR(0x41)
+#define EC_VAL_NO_TXL_WORK_TO_DO              EC_ERR(0x42)
+#define EC_VAL_NO_RX_WORK_TO_DO               EC_ERR(0x43)
+#define EC_VAL_NOT_LINKED                     EC_ERR(0x44)
+#define EC_VAL_INTERRUPT_NOT_FOUND            EC_ERR(0x45)
+#define EC_VAL_OFFSET_NOT_FOUND               EC_ERR(0x46)
+#define EC_VAL_MODULE_ALREADY_CLOSED          EC_ERR(0x47)
+#define EC_VAL_MODULE_ALREADY_SHUTDOWN        EC_ERR(0x48)
+#define EC_VAL_ACTION_NOT_FOUND               EC_ERR(0x49)
+#define EC_VAL_RX_CH_ALREADY_SETUP            EC_ERR(0x50)
+#define EC_VAL_TX_CH_ALREADY_SETUP            EC_ERR(0x51)
+#define EC_VAL_RX_CH_ALREADY_OPEN             EC_ERR(0x52)
+#define EC_VAL_TX_CH_ALREADY_OPEN             EC_ERR(0x53)
+#define EC_VAL_CH_ALREADY_SETUP               EC_ERR(0x54)
+#define EC_VAL_RCB_NEEDS_BUFFER               EC_ERR(0x55) /* +GSG 030410 */
+#define EC_VAL_RCB_DROPPED                    EC_ERR(0x56) /* +GSG 030410 */
+#define EC_VAL_INVALID_VALUE                  EC_ERR(0x57)
+
+/**
+@defgroup shared_data Shared Data Structures
+
+The data structures documented here are shared by all modules.
+*/
+
+/**
+ *  @ingroup shared_data
+ *  This is the fragment list structure.  Each fragment list entry contains a
+ *  length and a data buffer.
+ */
+typedef struct
+  {
+   bit32u   len;    /**< Length of the fragment in bytes (lower 16 bits are valid).  For SOP, upper 16 bits is the buffer offset. */
+   void     *data;  /**< Pointer to fragment data. */
+   void     *OsInfo; /**< Pointer to OS defined data. */
+  }FRAGLIST;
+
+#if defined (_CPHAL_CPMAC)
+#define CB_PASSCRC_BIT     (1<<26)
+
+/* CPMAC CPHAL STATUS */
+#define CPMAC_STATUS_LINK               (1 << 0)
+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  /* 0 - HD, 1 - FD */
+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  /* 0 - 10, 1 - 100 */
+
+/*   ADAPTER CHECK Codes */
+
+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)
+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)
+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13)
+
+#define _CPMDIO_DISABLE                 (1 << 0)
+#define _CPMDIO_HD                      (1 << 1)
+#define _CPMDIO_FD                      (1 << 2)
+#define _CPMDIO_10                      (1 << 3)
+#define _CPMDIO_100                     (1 << 4)
+#define _CPMDIO_NEG_OFF                 (1 << 5)
+#define _CPMDIO_LOOPBK                  (1 << 16)
+#define _CPMDIO_AUTOMDIX                (1 << 17)   /* Bit 16 and above not used by MII register */
+#define _CPMDIO_NOPHY                   (1 << 20)
+#endif
+
+/**
+ *  @ingroup shared_data
+ *  Channel specific configuration information.  This structure should be
+ *  populated by upper-layer software prior to calling @c ChannelSetup().  Any
+ *  configuration item that can be changed on a per channel basis should
+ *  be represented here.  Each module may define this structure with additional
+ *  module-specific members.
+ */
+typedef struct
+  {
+   int Channel;        /**< Channel number. */
+   int Direction;      /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
+   OS_SETUP *OsSetup;  /**< OS defined information associated with this channel. */
+
+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
+   int RxBufSize;      /**< Size (in bytes) for each Rx buffer.*/
+   int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
+   int RxNumBuffers;   /**< The number of Rx buffer descriptors to allocate for Ch. */
+   int RxServiceMax;   /**< Maximum number of packets to service at one time. */
+
+   int TxNumBuffers;   /**< The number of Tx buffer descriptors to allocate for Ch. */
+   int TxNumQueues;    /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
+   int TxServiceMax;   /**< Maximum number of packets to service at one time. */
+#endif
+
+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
+   int CpcsUU;      /**< The 2-byte CPCS UU and CPI information. */
+   int Gfc;         /**< Generic Flow Control. */
+   int Clp;         /**< Cell Loss Priority. */
+   int Pti;         /**< Payload Type Indication. */
+#endif
+
+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
+   int DaMask;      /**< Specifies whether credit issuance is paused when Tx data not available. */
+   int Priority;    /**< Priority bin this channel will be scheduled within. */
+   int PktType;     /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
+   int Vci;         /**< Virtual Channel Identifier. */
+   int Vpi;         /**< Virtual Path Identifier. */
+   int FwdUnkVc;    /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
+
+   /* Tx VC State */
+   int TxVc_CellRate;  /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
+   int TxVc_QosType;   /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
+   int TxVc_Mbs;       /**< Min Burst Size in cells.*/
+   int TxVc_Pcr;       /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
+
+   bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
+   int TxVc_OamTc;     /**< TC Path to transmit OAM cells for TX connection (0,1). */
+   int TxVc_VpOffset;  /**< Offset to the OAM VP state table. */
+   /* Rx VC State */
+   int RxVc_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
+   int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
+   bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
+   int RxVc_OamTc;     /**< TC Path to transmit OAM cells for RX connection (0,1). */
+   int RxVc_VpOffset;  /**< Offset to the OAM VP state table. */
+   /* Tx VP State */
+   int TxVp_OamTc;     /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
+   bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
+   /* Rx VP State  */
+   int RxVp_OamCh;     /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
+   int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
+   bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
+   int RxVp_OamTc;     /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
+   int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
+#endif
+
+
+#ifdef _CPHAL_VDMAVT
+   bit32u RemFifoAddr; /* Mirror mode only. */
+   bit32u FifoAddr;
+   bit32  PollInt;
+   bit32  FifoSize;
+   int    Ready;
+#endif
+
+  }CHANNEL_INFO;
+
+/*
+ *  This structure contains each statistic value gathered by the CPHAL.
+ *  Applications may access statistics data by using the @c StatsGet() routine.
+ */
+/* STATS */
+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
+typedef struct
+  {
+   bit32u CrcErrors[16];
+   bit32u LenErrors[16];
+   bit32u DmaLenErrors[16];
+   bit32u AbortErrors[16];
+   bit32u StarvErrors[16];
+   bit32u TxMisQCnt[16][2];
+   bit32u RxMisQCnt[16];
+   bit32u RxEOQCnt[16];
+   bit32u TxEOQCnt[16][2];
+   bit32u RxPacketsServiced[16];
+   bit32u TxPacketsServiced[16][2];
+   bit32u RxMaxServiced;
+   bit32u TxMaxServiced[16][2];
+   bit32u RxTotal;
+   bit32u TxTotal;
+  } STAT_INFO;
+#endif
+
+/*
+ *  VDMA Channel specific configuration information
+ */
+#ifdef _CPHAL_AAL2
+typedef struct
+  {
+   int Ch;           /**< Channel Number */
+   int RemoteEndian; /**< Endianness of remote VDMA-VT device */
+   int CpsSwap;      /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device.  When 1, in MS byte. */
+  }VdmaChInfo;
+#endif
+
+#ifndef _CPHAL
+  typedef void HAL_DEVICE;
+  typedef void HAL_PRIVATE;
+  typedef void HAL_RCB;
+  typedef void HAL_RECEIVEINFO;
+#endif
+
+/**
+ *  @ingroup shared_data
+ *  The HAL_FUNCTIONS struct defines the function pointers used by upper layer
+ *  software.  The upper layer software receives these pointers through the
+ *  call to xxxInitModule().
+ */
+typedef struct
+  {
+  int  (*ChannelSetup)    (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
+  int  (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
+  int  (*Close)           (HAL_DEVICE *HalDev, int Mode);
+  int  (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
+  int  (*Init)            (HAL_DEVICE *HalDev);
+  int  (*Open)            (HAL_DEVICE *HalDev);
+  int  (*PacketProcessEnd) (HAL_DEVICE *HalDev);
+  int  (*Probe)           (HAL_DEVICE *HalDev);
+  int  (*RxReturn)        (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
+  int  (*Send)            (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
+  int  (*Shutdown)        (HAL_DEVICE *HalDev);
+  int  (*Tick)            (HAL_DEVICE *HalDev);
+
+#ifdef _CPHAL_AAL5
+  int  (*Kick) (HAL_DEVICE *HalDev, int Queue);
+  void (*OamFuncConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig);
+  void (*OamLoopbackConfig)   (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
+  STAT_INFO*  (*StatsGetOld)(HAL_DEVICE *HalDev);
+#endif
+  } HAL_FUNCTIONS;
+
+/**
+ *  @ingroup shared_data
+ *  The OS_FUNCTIONS struct defines the function pointers for all upper layer
+ *  functions accessible to the CPHAL.  The upper layer software is responsible
+ *  for providing the correct OS-specific implementations for the following
+ *  functions. It is populated by calling InitModule() (done by the CPHAL in
+ *  xxxInitModule().
+ */
+typedef struct
+  {
+  int   (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
+  void  (*CriticalOn)(void);
+  void  (*CriticalOff)(void);
+  void  (*DataCacheHitInvalidate)(void *MemPtr, int Size);
+  void  (*DataCacheHitWriteback)(void *MemPtr, int Size);
+  int   (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
+  int   (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
+  int   (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
+  void  (*Free)(void *MemPtr);
+  void  (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
+  void  (*FreeDev)(void *MemPtr);
+  void  (*FreeDmaXfer)(void *MemPtr);
+  void  (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
+  void  (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
+  void* (*Malloc)(bit32u size);
+  void* (*MallocDev)(bit32u Size);
+  void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
+  void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
+                       OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
+                       OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
+  void* (*Memset)(void *Dest, int C, bit32u N);
+  int   (*Printf)(const char *Format, ...);
+  int   (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
+                 bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
+  int   (*SendComplete)(OS_SENDINFO *OsSendInfo);
+  int   (*Sprintf)(char *S, const char *Format, ...);
+  int   (*Strcmpi)(const char *Str1, const char *Str2);
+  unsigned int (*Strlen)(const char *S);
+  char* (*Strstr)(const char *S1, const char *S2);
+  unsigned long  (*Strtoul)(const char *Str, char **Endptr, int Base);
+  void  (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
+  } OS_FUNCTIONS;
+
+/************** MODULE SPECIFIC STUFF BELOW **************/
+
+#ifdef _CPHAL_CPMAC
+
+/*
+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
+*/
+
+int halCpmacInitModule(HAL_DEVICE **HalDev,
+                 OS_DEVICE *OsDev,
+                 HAL_FUNCTIONS **HalFunc,
+                 OS_FUNCTIONS *OsFunc,
+                 int OsFuncSize,
+                 int *HalFuncSize,
+                 int Inst);
+#endif
+
+#ifdef _CPHAL_AAL5
+/*
+ *  @ingroup shared_data
+ *  The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
+ *  software.  The upper layer software receives these pointers through the
+ *  call to cphalInitModule().
+ */
+/*
+typedef struct
+  {
+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
+  int  (*Init)(HAL_DEVICE *HalDev);
+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
+  int  (*Open)(HAL_DEVICE *HalDev);
+  int  (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
+  int  (*Probe)(HAL_DEVICE *HalDev);
+  int  (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
+  int  (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
+                 int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
+                 bit32u Mode);
+  int  (*StatsClear)(HAL_DEVICE *HalDev);
+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
+  int  (*Status)(HAL_DEVICE *HalDev);
+  void (*Tick)(HAL_DEVICE *HalDev);
+  int  (*Kick)(HAL_DEVICE *HalDev, int Queue);
+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
+  } AAL5_FUNCTIONS;
+*/
+
+int cpaal5InitModule(HAL_DEVICE **HalDev,
+                 OS_DEVICE *OsDev,
+                 HAL_FUNCTIONS **HalFunc,
+                 OS_FUNCTIONS *OsFunc,
+                 int OsFuncSize,
+                 int *HalFuncSize,
+                 int Inst);
+#endif
+
+#ifdef _CPHAL_AAL2
+/**
+ *  @ingroup shared_data
+ *  The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
+ *  software.  The upper layer software receives these pointers through the
+ *  call to cphalInitModule().
+ */
+typedef struct
+  {
+  int  (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
+  int  (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
+  int  (*Close)(HAL_DEVICE *HalDev, int Mode);
+  int  (*Init)(HAL_DEVICE *HalDev);
+  int  (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
+  int  (*Open)(HAL_DEVICE *HalDev);
+  int  (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
+  int  (*Probe)(HAL_DEVICE *HalDev);
+
+  int  (*StatsClear)(HAL_DEVICE *HalDev);
+  STAT_INFO*  (*StatsGet)(HAL_DEVICE *HalDev);
+  int  (*Status)(HAL_DEVICE *HalDev);
+  void (*Tick)(HAL_DEVICE *HalDev);
+  int  (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
+                                    int VdmaCh, int UUIDiscard);
+  int  (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
+                                   int LC);
+  int  (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
+  int  (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
+                               VdmaChInfo *VdmaCh);
+  volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
+  int  (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
+                           int RxMultiMode, int TxMultiMode, int SchedMode,
+                           int TcCh);
+  void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
+  int  (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
+  } AAL2_FUNCTIONS;
+
+int cpaal2InitModule(HAL_DEVICE **HalDev,
+                 OS_DEVICE *OsDev,
+                 AAL2_FUNCTIONS **HalFunc,
+                 OS_FUNCTIONS *OsFunc,
+                 int OsFuncSize,
+                 int *HalFuncSize,
+                 int Inst);
+#endif
+
+#ifdef _CPHAL_VDMAVT
+/**
+ *  @ingroup shared_data
+ *  The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
+ *  software.  The upper layer software receives these pointers through the
+ *  call to InitModule().
+ *
+ *  Note that this list is still under definition.
+ */
+typedef struct
+  {
+  bit32  (*Init)( HAL_DEVICE *VdmaVtDev);
+    /*  bit32  (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
+                  bit32u Addr, bit32u Size, bit32u PollInt);
+    bit32  (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
+                  bit32u Addr, bit32u Size, bit32u PollInt); */
+  bit32  (*Tx)(HAL_DEVICE *VdmaVtDev);
+  bit32  (*Rx)(HAL_DEVICE *VdmaVtDev);
+  bit32  (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
+                         bit32u RemDevID);
+  bit32  (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
+  bit32  (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
+  bit32  (*Open)(HAL_DEVICE *VdmaVtDev);
+  bit32  (*Close)(HAL_DEVICE *VdmaVtDev);
+  int    (*Control)         (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
+  int    (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
+  int    (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
+  int    (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
+                 int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
+  } VDMA_FUNCTIONS;
+
+int VdmaInitModule(HAL_DEVICE **VdmaVt,
+                 OS_DEVICE *OsDev,
+                 VDMA_FUNCTIONS **VdmaVtFunc,
+                 OS_FUNCTIONS *OsFunc,
+                 int OsFuncSize,
+                 int *HalFuncSize,
+                 int Inst);
+#endif
+
+/*
+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
+                      int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
+                      int *Size, int Inst);
+*/
+
+
+#ifdef _CPHAL_AAL5
+extern const char hcSarFrequency[];
+#endif
+
+#ifdef _CPHAL_CPMAC
+/* following will be common, once 'utl' added */
+extern const char hcClear[];
+extern const char hcGet[];
+extern const char hcSet[];
+extern const char hcTick[];
+
+extern const char hcCpuFrequency[];
+extern const char hcCpmacFrequency[];
+extern const char hcMdioBusFrequency[];
+extern const char hcMdioClockFrequency[];
+extern const char hcCpmacBase[];
+extern const char hcPhyNum[];
+extern const char hcSize[];
+extern const char hcCpmacSize[];
+extern const char hcPhyAccess[];
+extern const char hcMdixMask[];
+extern const char hcMdioMdixSwitch[];
+#endif
+
+#endif  /*  end of _INC_    */
diff -urN linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h
--- linux.old/drivers/net/avalanche_cpmac/dox_cpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/dox_cpmac.h	2005-07-12 02:48:42.050593000 +0200
@@ -0,0 +1,842 @@
+/*****************************************************************************
+ *  TNETDxxxx Software Support
+ *  Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
+ *
+ *  FILE:
+ *
+ *  DESCRIPTION:
+ *      This file contains documentation for the CPMAC
+ *
+ *  HISTORY:
+ *  @author Michael Hanrahan/Greg Guyotte
+ *  @version 1.00
+ *  @date    03-Dec-2002
+ *****************************************************************************/
+#ifndef _DOX_CPMAC_H
+#define _DOX_CPMAC_H
+/**
+@page CPMAC_Implementation_Details Version
+
+@copydoc CPMAC_Version
+*/
+
+/**
+@page cpmac_intro Introduction
+
+The CPMAC implementation will support 8 channels for transmit and 8 channel for
+receive.  Each of the 8 transmit channels has 1 queue associated with it.  It is
+recommended that only 1 channel is used for @c Receive() per processor.
+*/
+
+/**
+@page cpmac_details API Implementation Details
+@par osReceive
+@p Mode parameter
+- The Upper 16 bits of Mode match Word 3 of the Rx Buffer Descriptor
+
+@par halSend
+@p Mode parameter
+-  Bits 0-7 contain the Channel Number
+-  Bits 8-25 are reserved
+-  Bit  26 - if 0, the CRC will be calculated, if 1 the CRC will be Passed
+-  Bits 27-31 : reserved
+@section cpmac_keys Control Keys
+
+@par StateChange
+CPHAL calls the OS when a state change is detected.
+OS should check the CPMAC Status. See the Control Key 'Status' for more details.
+
+@par Status
+OS calls the CPHAL to obtain Status information. The Returned status is as follows
+
+@par MaxFrags
+The OS may "Set" or "Get" this value.  This defines the maximum
+number of fragments that can be received by the CPMAC Rx port.  The default
+value for CPMAC is 2.  This provides enough space to receive a maximum
+length packet (1,518 bytes) with the default buffer size of 1518 and any
+amount of RxBufferOffset.  If the buffer size is configured to be smaller,
+the OS *MUST* modify this parameter according to the following formula:
+((System Max packet length)/(RxBufSize)) + 1.  (The extra 1 fragment is to
+allow for RxBufferOffset)
+
+@code
+// Following defined in "cpswhal_cpmac.h"
+// CPMAC CPHAL STATUS
+#define CPMAC_STATUS_LINK               (1 << 0)
+#define CPMAC_STATUS_LINK_DUPLEX        (1 << 1)  // 0 - HD, 1 - FD
+#define CPMAC_STATUS_LINK_SPEED         (1 << 2)  // 0 - 10, 1 - 100
+
+// ADAPTER CHECK Codes
+#define CPMAC_STATUS_ADAPTER_CHECK             (1 << 7)
+#define CPMAC_STATUS_HOST_ERR_DIRECTION        (1 << 8)    // 0 - Tx, 1 - Rx
+#define CPMAC_STATUS_HOST_ERR_CODE             (0xF << 9)  See CPMAC Guide
+#define CPMAC_STATUS_HOST_ERR_CH               (0x7 << 13) See CPMAC Guide
+@endcode
+
+@code
+void osStateChange(OS_DEVICE *OsDev)
+  {
+  int status;
+  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
+  if(status & CPMAC_STATUS_ADAPTER_CHECK)
+    {
+    printf("[osStateChange[%d]]  HAL notified OS of AdapterCheck (Link Status 0x%08X)\n", OsDev->port, status);
+    adaptercheck(OsDev->port);
+    }
+  else
+    {
+    printf("[osStateChange[%d]]  HAL notified OS of State Change (Link Status %s)\n", OsDev->port, (status & CPMAC_STATUS_LINK) ? "Up" : "Down");
+    if(status & CPMAC_STATUS_LINK)
+      {
+      printf("Speed %s, Duplex %s\n",
+      status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
+      status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
+      }
+    }
+@endcode
+
+@par Tick
+     The CPHAL calls the OS to set the interval for calling halTick()<BR>
+     Note: Predefined value hcTick now recommended for use.
+@code
+***  Example Code ***
+
+*** CPHAL code ***
+int Ticks;
+HalDev->OsFunc->Control(HalDev->OsDev, hcTick, hcSet, &Ticks);
+
+*** OS code ***
+  ..
+  if(osStrcmpi(pszKey, hcTick) == 0)
+  {
+    if(osStrcmpi(pszAction, hcSet) == 0)
+    {
+      // Enable the Tick Interval
+      if(*(unsigned int *) ParmValue)
+        printf("osTickSet: Interval = %d ticks\n", Interval);
+    }
+    else
+    if(osStrcmpi(pszAction, hcClear) == 0)
+    {
+        // Request disabling of the Tick Timer, ParmValue is ignored
+    }
+  }
+@endcode
+
+@par The following information can be obtained by the OS via 'Get'
+
+- StatsDump : OS supplies pointer to an 36 element unsigned int array
+CPHAL will populate the array with the current Statistics values.<BR>
+Note: all hcXXXX values are predefined and should be used by the OS.
+
+- hcPhyNum : Returns the PHY number.
+- hcCpmacBase : Returns the base-address of the CPMAC device
+- hcCpmacSize : Returns size of the CPMAC memory map
+
+
+@par Phy Register Communication
+
+halControl() is used to read and write the Phy Registers via the key hcPhyAccess
+
+Both reading and writing the Phy registers involve setting the Value parameter of halControl()
+<BR>
+Value is a 32-bit value with bits partioned as follows
+<BR>
+
+   0 -  4  Phy Number   <BR>
+   5 -  9  Phy Register <BR>
+  10 - 15  reserved     <BR>
+  16 - 31  Data  (write only)
+<BR>
+
+
+<B>Reading the Phy register</B>
+
+@code
+    bit32u Value;
+    bit32u RegAddr;
+    bit32u PhyNum;
+    bit32u PhyRegisterData;
+
+    //  Read Phy 31, register 20
+
+    PhyNum  = 31;
+    RegAddr = 20;
+
+    Value = (RegAddr << 5);
+    Value |= (PhyNum & 0x1F);
+
+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
+    If(rc == 0)
+    {
+        // Value is overwriten with the value in Register 20 of Phy number 31.
+        PhyRegisterData = Value;
+    }
+@endcode
+
+<B>Writing the Phy register</B>
+@code
+    bit32u Value;
+    bit32u RegAddr;
+    bit32u PhyNum;
+    bit32u PhyRegisterData;
+
+    //  Reset Phy 23
+
+    PhyNum  = 23;
+    RegAddr = 0;
+    PhyRegisterData = 0x8000;  // Reset bit set
+
+    Value = (RegAddr << 5);
+    Value |= (PhyNum & 0x1F);
+    Value |= (PhyRegisterData << 16);
+
+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcSet, (bit32u *) &Value)
+
+    // Check is reset if done
+
+    PhyNum  = 23;
+    RegAddr = 0;
+
+    Value = (RegAddr << 5);
+    Value |= (PhyNum & 0x1F);
+
+    rc  = HalFunc->Control(HalDev, hcPhyAccess, hcGet, (bit32u *) &Value)
+
+    If(rc == 0)
+    {
+        // Value is overwriten with the value in Register 0 of Phy number 23.
+        PhyRegisterData = Value;
+        if((PhyRegisterData & 0x8000) == 0)
+           ResetIsComplete;
+    }
+
+@endcode
+<B>
+*** Example Showing turning values off/on ***
+<BR>
+</B>
+
+@code
+
+int On=1;
+int Off=0;
+   # Turn On loopback
+   OsDev->HalFunc->Control(OsDev->HalDev, "CTRL_LOOPBACK", hcSet, (int*) &On);
+
+   #  Turn off RX Flow
+   OsDev->HalFunc->Control(OsDev->HalDev, "RX_FLOW_EN", hcSet, (int*) &Off);
+@endcode
+
+@par CPMAC Configurable Parameters
+
+- RX_PASS_CRC        : See MBP_Enable description
+- RX_QOS_EN          : See MBP_Enable description
+- RX_NO_CHAIN        : See MBP_Enable description
+- RX_CMF_EN          : See MBP_Enable description
+- RX_CSF_EN          : See MBP_Enable description
+- RX_CEF_EN          : See MBP_Enable description
+- RX_CAF_EN          : See MBP_Enable description
+- RX_PROM_CH         : See MBP_Enable description
+- RX_BROAD_EN        : See MBP_Enable description
+- RX_BROAD_CH        : See MBP_Enable description
+- RX_MULT_EN         : See MBP_Enable description
+- RX_MULT_CH         : See MBP_Enable description
+
+- TX_PTYPE           : See MacControl description
+- TX_PACE            : See MacControl description
+- TX_FLOW_EN         : See MacControl description
+- RX_FLOW_EN         : See MacControl description
+- CTRL_LOOPBACK      : See MacControl description
+
+- RX_MAXLEN          : See CPMAC Guide
+- RX_FILTERLOWTHRESH : See CPMAC Guide
+- RX0_FLOWTHRESH     : See CPMAC Guide
+- RX_UNICAST_SET     : See CPMAC Guide
+- RX_UNICAST_CLEAR   : See CPMAC Guide
+
+@par Multicast Support
+- RX_MULTI_ALL       : When used with hcSet, sets all the Hash Bits. When used
+with hcClear clears all the Hash Bits.
+- RX_MULTI_SINGLE    : When used with hcSet, adds the Hashed Mac Address. When used
+with hcClear deletes the Hashed Mac Address.
+Note: Support will be added to keep track of Single additions and deletions.
+
+@code
+*** Example Code ***
+
+*** OS code ***
+  bit8u  MacAddress[6];
+  MacAddress[0] = 0x80;
+  MacAddress[1] = 0x12;
+  MacAddress[2] = 0x34;
+  MacAddress[3] = 0x56;
+  MacAddress[4] = 0x78;
+  MacAddress[5] = 0x78;
+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcSet, (bit8u*) &MacAddress);
+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_SINGLE", hcClear, (bit8u*) &MacAddress);
+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcSet, NULL);
+  OsDev->HalFunc->Control(OsDev->HalDev, "RX_MULTI_ALL", hcClear, NULL);
+@endcode
+@par MdioConnect Fields
+<BR>
+- "MdioConnect"     : The OS can set the Phy connection using this key. The default connection is Auto-Negotiation ON, All modes possible.
+
+
+- _CPMDIO_HD       <----- Allow Half Duplex, default is 1 (On)
+- _CPMDIO_FD       <----- Allow Full Duplex, default is 1 (On)
+- _CPMDIO_10       <----- Allow 10  Mbs, default is 1 (On)
+- _CPMDIO_100      <----- Allow 100 Mbs, default is 1 (On)
+- _CPMDIO_NEG_OFF  <----- Turn off Auto Negotiation, default is 0 (Auto Neg is on)
+- _CPMDIO_NOPHY    <----- Set for use with Marvel-type switch, default is 0 (Phy present)
+- _CPMDIO_AUTOMDIX  <---- Enables Auto Mdix (in conjunction with MdixMask), default is 1 (On)
+
+Note: When _CPMDIO_NOPHY is set, CPMAC will report being linked at 100/FD. Reported PhyNum will be 0xFFFFFFFF
+
+@par Setting CPMAC for use with a Marvel-type Switch
+@code
+     bit32u MdioConnect;
+
+     MdioConnect = _CPMDIO_NOPHY;
+     OsDev->HalFunc->Control(OsDev->HalDev, "MdioConnect", hcSet, (bit32u*) &MdioConnect);
+@endcode
+
+@par OS Support for MDIO
+@p The OS will need to supply the following values which the CPHAL will request via halControl()
+<BR>
+- MdioBusFrequency : The frequency of the BUS that MDIO is on (requested via hcMdioBusFrequency)
+<BR>
+- MdioClockFrequency : The desired Clock Frequency that MDIO qill operate at (requested via hcMdioClockFrequency)
+*/
+
+/**
+@page cpmac_conf DeviceFindxxx() Parameters
+
+These are some of the parameters that the CPMAC will request via the DeviceFindxxx() functions -
+<BR>
+- "Mlink"    : bit mask indicating what link status method Phy is using. Default is MDIO state machine (0x0)
+- "PhyMask"  : bit mask indicating PhyNums used by this CPMAC (e.g 0x8000000, PhyNum is 31)
+- "MdixMask" : bit mask indicating which Phys support AutoMdix. Default is 0x0 (None)
+<BR>
+@par Example cpmac definition from the options.conf for the Sangam VDB
+<BR>
+- cpmac( id=eth0, base=0xA8610000, size=0x800, reset_bit=17, int_line=19, PhyMask=0x80000000, MLink=0, MdixMask=0 )
+*/
+
+/**
+@page auto_mdix Auto Mdix Support
+
+Auto Mdix selection is controlled by two elements in the CPMAC. First the OS can turn Auto Midx On or Off by the use of the
+MdioConnect field, _CPMDIO_AUTOMDIX. This is defaulted ON.  For actual Auto Mdix operation the Phy must also be Auto Mdix capable.
+This is specified by the DeviceFindxxx() field, "MdixMask" (supplied as the variable hcMdixMask).
+If both these fields are set then the CPMDIO state machine will be enabled for Auto Mdix checking.
+If a switch to MDI or MDIX mode is needed, the CPMAC will signal this to the OS via Control() using
+the hcMdioMdixSwitch key.
+
+@par OS example for responding to a Mdix Switch Request
+<BR>
+@code
+if(osStrcmpi(pszKey, hcMdioMdixSwitch) == 0)  // See if key is Mdix Switch Request
+  {
+      if(osStrcmpi(pszAction, hcSet) == 0)   // Only respond to Set requests
+      {
+
+          bit32u Mdix;
+
+          Mdix = *(bit32u *) ParmValue;     // Extract requested Mode
+                                            // 0 : MDI
+                                            // 1 : MDIX
+          if(Mdix)
+            osSetPhyIntoMdixMode();         // Device specific logic
+          else
+            osSetPhyIntoMdiMode();          // Device specific logic
+          rc = 0;                           // Set return code as Successfull
+      }
+@endcode
+*/
+
+/**
+@page cpmac_stats CPMAC Specific Statistics
+
+Statistics level '0' contains all CPMAC specific statistics.
+
+
+*/
+
+/**
+@page Example_Driver_Code
+
+@section  example_intro Introduction
+This section provides an in-depth code example for driver implementations.  The code
+below illustrates the use of the CPMAC HAL, but is equally applicable to any CPHAL
+implementation. Note: the CPHAl constants hcGet, hcSet etc., are currently available for use with teh CPMAC module.
+Other modules should continue to use pszGET, etc. until these are made generally available.
+
+@par Pull Model Example
+
+@code
+
+#define _CPHAL_CPMAC
+
+typedef struct _os_device_s  OS_DEVICE;
+typedef struct _os_receive_s OS_RECEIVEINFO;
+typedef struct _os_send_s    OS_SENDINFO;
+typedef struct _os_setup_s   OS_SETUP;
+
+#include "cpswhal_cpmac.h"
+
+#define dbgPrintf printf
+
+typedef struct  _os_device_s
+{
+   HAL_DEVICE    *HalDev;
+   HAL_FUNCTIONS *HalFunc;
+   OS_FUNCTIONS  *OsFunc;
+   OS_SETUP      *OsSetup;
+   bit32u        Interrupt;
+   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
+   int           ModulePort;
+   int           Protocol;
+   int           LinkStatus;  // 0-> down, otherwise up
+}os_device_s;
+
+typedef struct  _os_receive_s
+{
+   HAL_RECEIVEINFO *HalReceiveInfo;
+   char   *ReceiveBuffer;
+   OS_DEVICE  *OsDev;
+}os_receive_s;
+
+typedef struct  _os_send_s
+{
+   OS_DEVICE  *OsDev;
+}os_send_s;
+
+typedef struct  _os_setup_s
+{
+   OS_DEVICE  *OsDev;
+}os_setup_s;
+
+
+
+void FlowForCphal(OS_DEVICE *OsDev)
+{
+  CHANNEL_INFO ChannelInfo;
+  int nChannels = 200;
+  int halFuncSize;
+  int rc;
+
+  //  Populate OsFunc structure
+  rc =  osInitModule(OsDev);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+
+  //  OS-Cphal handshake
+  rc = halCpmacInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
+                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from halCpmacInitModule:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+  // See if hardware module exists
+  rc = OsDev->HalFunc->Probe(OsDev->HalDev);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from Probe:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+  // Initialize hardware module
+  rc = OsDev->HalFunc->Init(OsDev->HalDev);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from Init:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+  // Setup Channel Information (Tranmsit, channel 0)
+  ChannelInfo.Channel      = 0;
+  ChannelInfo.Direction    = DIRECTION_TX;
+  ChannelInfo.TxNumBuffers = nChannels;
+  ChannelInfo.TxNumQueues  = 1;
+  ChannelInfo.TxServiceMax = nChannels/3;
+
+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
+
+  // Setup Channel Information (Receive, channel 0)
+  ChannelInfo.Channel        = 0;
+  ChannelInfo.Direction      = DIRECTION_RX;
+  ChannelInfo.RxBufSize      = 1518;
+  ChannelInfo.RxBufferOffset = 0;
+  ChannelInfo.RxNumBuffers   = 2*nChannels;
+  ChannelInfo.RxServiceMax   = nChannels/3;
+
+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
+
+  // Open the hardware module
+  rc = OsDev->HalFunc->Open(OsDev->HalDev);
+
+  // Module now ready to Send/Receive data
+}
+
+
+int osInitModule(OS_FUNCTIONS **pOsFunc)
+  {
+   OS_FUNCTIONS *OsFunc;
+
+   OsFunc = (OS_FUNCTIONS *) malloc(sizeof(OS_FUNCTIONS));
+   if (!OsFunc)
+     return (-1);
+
+   *pOsFunc = OsFunc;
+
+   OsFunc->CriticalOff               = osCriticalOff;
+   OsFunc->CriticalOn                = osCriticalOn;
+   OsFunc->DataCacheHitInvalidate    = osDataCacheHitInvalidate;
+   OsFunc->DataCacheHitWriteback     = osDataCacheHitWriteback;
+   OsFunc->DeviceFindInfo            = osDeviceFindInfo;
+   OsFunc->DeviceFindParmUint        = osDeviceFindParmUint;
+   OsFunc->DeviceFindParmValue       = osDeviceFindParmValue;
+   OsFunc->Free                      = osFree;
+   OsFunc->FreeDev                   = osFreeDev;
+   OsFunc->FreeDmaXfer               = osFreeDmaXfer;
+   OsFunc->FreeRxBuffer              = osFreeRxBuffer;
+   OsFunc->IsrRegister               = osIsrRegister;
+   OsFunc->IsrUnRegister             = osIsrUnRegister;
+   OsFunc->Malloc                    = osMalloc;
+   OsFunc->MallocDev                 = osMallocDev;
+   OsFunc->MallocDmaXfer             = osMallocDmaXfer;
+   OsFunc->MallocRxBuffer            = osMallocRxBuffer;
+
+
+   OsFunc->Memset                    = memset;
+   OsFunc->Printf                    = printf;
+   OsFunc->Sprintf                   = sprintf;
+   OsFunc->Strcmpi                   = osStrcmpi;
+   OsFunc->Strlen                    = strlen;
+   OsFunc->Strstr                    = strstr;
+   OsFunc->Strtoul                   = strtoul;
+
+   OsFunc->Control                   = osControl;
+   OsFunc->Receive                   = osReceive;
+   OsFunc->SendComplete              = osSendComplete;
+   OsFunc->TeardownComplete          = osTearDownComplete;
+
+   return(0);
+  }
+
+
+int osReceive(OS_DEVICE *OsDev,FRAGLIST *Fraglist,bit32u FragCount,bit32u PacketSize,HAL_RECEIVEINFO *halInfo, bit32u mode)
+  {
+  OS_RECEIVEINFO *skb = (OS_RECEIVEINFO *)Fraglist[0].OsInfo;
+  dcache_i((char *)Fraglist->data, Fraglist->len);
+  OsDev->HalFunc->RxReturn(halInfo,0);
+  return(0);
+  }
+
+int osSendComplete(OS_SENDINFO *skb)
+  {
+  return(0);
+  }
+
+
+static void *osMallocRxBuffer(bit32u Size,void *MemBase, bit32u MemRange,
+                              OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
+                              OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev )
+  {
+   void *HalBuffer;
+   OS_RECEIVEINFO *OsPriv;
+
+   HalBuffer=malloc(Size);
+   if (!HalBuffer)
+     {
+      return(0);
+     }
+
+   // Malloc the OS block
+   *OsReceiveInfo = malloc(sizeof(OS_RECEIVEINFO));
+   if (!*OsReceiveInfo)
+     {
+      free(HalBuffer);
+      return(0);
+     }
+
+   // Initialize the new buffer descriptor
+   OsPriv                 = *OsReceiveInfo;
+   OsPriv->OsDev          =  OsDev;
+   OsPriv->ReceiveBuffer  =  HalBuffer;
+   OsPriv->HalReceiveInfo =  HalReceiveInfo;
+
+   return(HalBuffer);
+  }
+
+
+void SendBuffer(OS_DEVICE *OsDev, char *Buffer, int Size)
+{
+  FRAGLIST Fraglist;
+  bit32u FragCount;
+
+  tcb_pending++;
+  Fraglist.len  = Size;
+  Fraglist.data = (unsigned *) Buffer;
+  FragCount     = 1;
+  mode          = 0;   //  Channel 0
+
+  dcache_wb(Fraglist.data, Fraglist.len);
+  OsDev->HalFunc->Send(OsDev->HalDev, &Fraglist, FragCount, Size, (OS_SENDINFO *) Buffer, mode);
+}
+
+
+void osStateChange(OS_DEVICE *OsDev)
+  {
+  int status;
+  int LinkStatus;
+  OsDev->HalFunc->Control(OsDev->HalDev, "Status", hcGet, &status);
+  if(status & CPMAC_STATUS_ADAPTER_CHECK)
+    {
+    //  Adapter Check, take appropiate action
+    }
+  else
+    {
+    LinkStatus = status & CPMAC_STATUS_LINK;
+    if(LinkStatus != OsDev->LinkStatus)
+      {
+      dbgPrintf("\n%s:Link %s for inst %d Speed %s, Duplex %s\n",
+                 __FUNCTION__,
+                 LinkStatus ? "up" : "down",
+                 OsDev->ModulePort,
+                 status & CPMAC_STATUS_LINK_SPEED ? "100" : "10",
+                 status & CPMAC_STATUS_LINK_DUPLEX ? "FD" : "HD");
+      OsDev->LinkStatus = LinkStatus;
+      }
+    }
+  }
+
+
+int osControl(OS_DEVICE *OsDev, const char *pszKey, const char* pszAction, void *ParmValue)
+  {
+  int rc=-1;
+
+  if (osStrcmpi(pszKey, hcCpuFrequency) == 0)
+   {
+   if(osStrcmpi(pszAction, hcGet) == 0)
+     {
+     *(bit32u*) ParmValue = cpufreq;
+     rc = 0;
+     }
+   }
+  if (osStrcmpi(pszKey, hcMdioBusFrequency) == 0)
+   {
+   if(osStrcmpi(pszAction, hcGet) == 0)
+     {
+     *(bit32u *)ParmValue = MdioBusFrequency;
+     rc = 0;
+     }
+   }
+if (osStrcmpi(pszKey, hcMdioClockFrequency) == 0)
+   {
+   if(osStrcmpi(pszAction, hcGet) == 0)
+     {
+     *(bit32u *)ParmValue = MdioClockFrequency;
+     rc = 0;
+     }
+   }
+
+  if (osStrcmpi(pszKey, hcTick) == 0)
+   {
+   if(osStrcmpi(pszAction, hcSet) == 0)
+     {
+       osTickSetInterval(OsDev, *(unsigned int *) ParmValue);
+       rc = 0;
+     }
+   else
+   if(osStrcmpi(pszAction, hcClear) == 0)
+     {
+       osTickDisable(OsDev);
+       rc = 0;
+     }
+   }
+
+  if (osStrcmpi(pszKey, "SioFlush") == 0)
+    {
+       MySioFlush();
+       rc = 0;
+    }
+
+  if (osStrcmpi(pszKey, "StateChange") == 0)
+    {
+       osStateChange(OsDev);
+       rc = 0;
+    }
+
+  if (osStrcmpi(pszKey, "Sleep") == 0)
+    {
+       osSleep(*(int *)ParmValue);
+       rc = 0;
+    }
+  return(rc);
+  }
+
+@endcode
+
+
+@par Push Model Example (Currently Eswitch ONLY)
+
+@code
+
+typedef struct _os_device_s  OS_DEVICE;
+typedef struct _os_receive_s OS_RECEIVEINFO;
+typedef struct _os_send_s    OS_SENDINFO;
+typedef struct _os_setup_s   OS_SETUP;
+
+#include "cpswhal.h"          //Get glogal HAL stuff
+#include "cpswhaleswitch.h"   //Get device specific hal stuff
+
+
+typedef struct  _os_device_s
+{
+   HAL_DEVICE    *HalDev;
+   HAL_FUNCTIONS *HalFunc;
+   OS_FUNCTIONS  *OsFunc;
+   OS_SETUP      *OsSetup;
+   bit32u        Interrupt;
+   int           (*halIsr)(HAL_DEVICE  *HalDev, int*);
+   int           ModulePort;
+   int           Protocol;
+   int           LinkStatus;  // 0-> down, otherwise up
+}os_device_s;
+
+typedef struct  _os_receive_s
+{
+   HAL_RECEIVEINFO *HalReceiveInfo;
+   char   *ReceiveBuffer;
+   OS_DEVICE  *OsDev;
+}os_receive_s;
+
+typedef struct  _os_send_s
+{
+   OS_DEVICE  *OsDev;
+}os_send_s;
+
+typedef struct  _os_setup_s
+{
+   OS_DEVICE  *OsDev;
+}os_setup_s;
+
+
+
+void FlowForCphal(OS_DEVICE *OsDev)
+{
+CHANNEL_INFO ChannelInfo;
+  int nChannels = 200;
+  int halFuncSize;
+  int rc;
+
+  //  Populate OsFunc structure
+  rc =  osInitModule(OsDev);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from osInitModule:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+
+  //  OS-Cphal handshake
+  rc = cpswHalEswitchInitModule(&OsDev->HalDev, OsDev, &OsDev->HalFunc, OsDev->OsFunc,
+                              sizeof(OS_FUNCTIONS), &halFuncSize, OsDev->ModulePort);
+
+  if(rc)
+  {
+    sprintf(bufTmp, "%s: return code from cpswHalEswitchInitModule:'0x%08X'", __FUNCTION__, rc);
+    errorout(bufTmp);
+  }
+
+
+  ChannelInfo.Channel      = 7;
+  ChannelInfo.Direction    = DIRECTION_RX;
+  ChanInfo.Receive = osReceiveSS;         //  Specify function to receive data for this channel
+
+  rc = OsDev->HalFunc->ChannelSetup(OsDev->HalDev, &ChannelInfo, OsDev->OsSetup);
+
+  MyConfig.debug=0;
+  MyConfig.CpuFrequency = CpuFreq;
+  MyConfig.EswitchFrequency = EswitchFreq;
+  MyConfig.ResetBase  = 0xa8611600;
+  MyConfig.MacAddress = MacAddr;
+
+  MyConfig.EswitchResetBit= 27;
+  MyConfig.Cpmac0ResetBit = 17;
+  MyConfig.Cpmac1ResetBit = 21;
+  MyConfig.MdioResetBit   = 22;
+  MyConfig.Phy0ResetBit   = 26;
+  MyConfig.Phy1ResetBit   = 28;
+  MyConfig.HdmaResetBit   = 13;
+  MyConfig.Cpmac0IntBit   = 19;
+  MyConfig.Cpmac1IntBit   = 33;
+  MyConfig.EswitchIntBit  = 27;
+  MyConfig.EswitchBase    = 0xa8640000;
+  MyConfig.EswitchBufferSize     = 64;
+  MyConfig.EswitchHostBufCount   = 0;
+  MyConfig.EswitchDefaultCamSize = 64;
+  MyConfig.EswitchOverFlowCount  = 200;
+  MyConfig.EswitchOverFlowSize   = 256;
+
+
+
+
+  rc=EswitchConfig(HalDev,HalFunc,&MyConfig);
+
+
+  // Open the hardware module
+  rc = OsDev->HalFunc->Open(OsDev->HalDev);
+
+  // Module now ready to Send/Receive data
+}
+
+
+int EswitchConfig(HAL_DEVICE *HalDev, HAL_FUNCTIONS *HalFunc, ESWITCH_CONFIG *Config)
+{
+  bit32u sts;
+  sts = 0;
+
+  sts |= cpswhalPushBin(hcdebug, Config->debug);
+  sts |= cpswhalPushBin(hcCpuFrequency     , Config->CpuFrequency );
+  sts |= cpswhalPushBin(hcEswitchFrequency , Config->EswitchFrequency );
+  sts |= cpswhalPushBin(hcResetBase        , Config->ResetBase  );
+  sts |= cpswhalPushBin(hcMacAddress       , Config->MacAddress );
+  sts |= cpswhalPushBin(hcEswitchResetBit, Config->EswitchResetBit);
+  sts |= cpswhalPushBin(hcCpmac0ResetBit , Config->Cpmac0ResetBit );
+  sts |= cpswhalPushBin(hcCpmac1ResetBit , Config->Cpmac1ResetBit );
+  sts |= cpswhalPushBin(hcMdioResetBit   , Config->MdioResetBit   );
+  sts |= cpswhalPushBin(hcPhy0ResetBit   , Config->Phy0ResetBit   );
+  sts |= cpswhalPushBin(hcPhy1ResetBit   , Config->Phy1ResetBit   );
+  sts |= cpswhalPushBin(hcHdmaResetBit   , Config->HdmaResetBit   );
+  sts |= cpswhalPushBin(hcCpmac0IntBit   , Config->Cpmac0IntBit   );
+  sts |= cpswhalPushBin(hcCpmac1IntBit   , Config->Cpmac1IntBit   );
+  sts |= cpswhalPushBin(hcEswitchIntBit  , Config->EswitchIntBit  );
+  sts |= cpswhalPushBin(hcEswitchBase           , Config->EswitchBase    );
+  sts |= cpswhalPushBin(hcEswitchBufferSize     , Config->EswitchBufferSize     );
+  sts |= cpswhalPushBin(hcEswitchHostBufCount   , Config->EswitchHostBufCount   );
+  sts |= cpswhalPushBin(hcEswitchDefaultCamSize , Config->EswitchDefaultCamSize );
+  sts |= cpswhalPushBin(hcEswitchOverFlowCount  , Config->EswitchOverFlowCount  );
+  sts |= cpswhalPushBin(hcEswitchOverFlowSize   , Config->EswitchOverFlowSize   );
+  return(sts);
+}
+
+
+
+@endcode
+*/
+
+#endif
diff -urN linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h
--- linux.old/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/ec_errors_cpmac.h	2005-07-12 02:48:42.051592000 +0200
@@ -0,0 +1,118 @@
+/***************************************************************************
+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
+
+ FILE:  ec_errors.h
+
+ DESCRIPTION:
+   This file contains definitions and function declarations for
+   error code support.
+
+ HISTORY:
+   14Dec00 MJH             Added masking to EC_CLASS etc macros
+   17Sep02 GSG             Added HAL support (new class&devices)
+   03Oct02 GSG             Removed C++ style comments
+***************************************************************************/
+#ifndef _INC_EC_ERRORS
+#define _INC_EC_ERRORS
+
+/*
+  31    - CRITICAL
+  30-28 - CLASS         (ie. DIAG, KERNEL, FLASH, etc)
+  27-24 - INSTANCE      (ie. 1, 2, 3, etc )
+  23-16 - DEVICE        (ie. EMAC, IIC, etc)
+  15-08 - FUNCTION      (ie. RX, TX, INIT, etc)
+  07-00 - ERROR CODE    (ie. NO_BASE, FILE_NOT_FOUND, etc )
+*/
+
+/*---------------------------------------------------------------------------
+  Useful defines for accessing fields within error code
+---------------------------------------------------------------------------*/
+#define CRITICAL_SHIFT    31
+#define CLASS_SHIFT       28
+#define INST_SHIFT        24
+#define DEVICE_SHIFT      16
+#define FUNCTION_SHIFT     8
+#define ERROR_CODE_SHIFT   0
+
+#define CRITICAL_MASK     1
+#define CLASS_MASK        0x07
+#define DEVICE_MASK       0xFF
+#define INST_MASK         0x0F
+#define FUNCTION_MASK     0xFF
+#define ERROR_CODE_MASK   0xFF
+
+#define EC_CLASS(val)     ((val&CLASS_MASK)      << CLASS_SHIFT)
+#define EC_DEVICE(val)    ((val&DEVICE_MASK)     << DEVICE_SHIFT)
+#define EC_INST(val)      ((val&INST_MASK)       << INST_SHIFT)
+#define EC_FUNC(val)      ((val&FUNCTION_MASK)   << FUNCTION_SHIFT)
+#define EC_ERR(val)       ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
+
+/*---------------------------------------------------------------------------
+   Operation classes
+---------------------------------------------------------------------------*/
+#define EC_HAL              EC_CLASS(0)
+#define EC_DIAG             EC_CLASS(8)
+
+/*---------------------------------------------------------------------------
+   Device types
+---------------------------------------------------------------------------*/
+#define EC_DEV_EMAC         EC_DEVICE(1)
+#define EC_DEV_IIC          EC_DEVICE(2)
+#define EC_DEV_RESET        EC_DEVICE(3)
+#define EC_DEV_ATMSAR       EC_DEVICE(4)
+#define EC_DEV_MEM          EC_DEVICE(5)
+#define EC_DEV_DES          EC_DEVICE(6)
+#define EC_DEV_DMA          EC_DEVICE(7)
+#define EC_DEV_DSP          EC_DEVICE(8)
+#define EC_DEV_TMR          EC_DEVICE(9)
+#define EC_DEV_WDT          EC_DEVICE(10)
+#define EC_DEV_DCL          EC_DEVICE(11)
+#define EC_DEV_BBIF         EC_DEVICE(12)
+#define EC_DEV_PCI              EC_DEVICE(13)
+#define EC_DEV_XBUS         EC_DEVICE(14)
+#define EC_DEV_DSLIF            EC_DEVICE(15)
+#define EC_DEV_USB                      EC_DEVICE(16)
+#define EC_DEV_CLKC                     EC_DEVICE(17)
+#define EC_DEV_RAPTOR       EC_DEVICE(18)
+#define EC_DEV_DSPC                     EC_DEVICE(19)
+#define EC_DEV_INTC                     EC_DEVICE(20)
+#define EC_DEV_GPIO                     EC_DEVICE(21)
+#define EC_DEV_BIST                     EC_DEVICE(22)
+#define EC_DEV_HDLC                     EC_DEVICE(23)
+#define EC_DEV_UART                     EC_DEVICE(24)
+#define EC_DEV_VOIC                     EC_DEVICE(25)
+/* 9.17.02 (new HAL modules) */
+#define EC_DEV_CPSAR        EC_DEVICE(0x1A)
+#define EC_DEV_AAL5         EC_DEVICE(0x1B)
+#define EC_DEV_AAL2         EC_DEVICE(0x1C)
+#define EC_DEV_CPMAC        EC_DEVICE(0x1D)
+#define EC_DEV_VDMA         EC_DEVICE(0x1E)
+#define EC_DEV_VLYNQ        EC_DEVICE(0x1F)
+#define EC_DEV_CPPI         EC_DEVICE(0x20)
+#define EC_DEV_CPMDIO       EC_DEVICE(0x21)
+
+/*---------------------------------------------------------------------------
+   Function types
+---------------------------------------------------------------------------*/
+#define EC_FUNC_READ_CONF   EC_FUNC(1)
+#define EC_FUNC_INIT        EC_FUNC(2)
+
+/*---------------------------------------------------------------------------
+   Error codes
+---------------------------------------------------------------------------*/
+#define EC_CRITICAL         (1<<CRITICAL_SHIFT)
+#define EC_NO_ERRORS        0
+#define EC_VAL_NO_BASE      EC_ERR(1)
+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
+#define EC_VAL_NO_RESET     EC_ERR(3)
+#define EC_VAL_BAD_BASE     EC_ERR(4)
+#define EC_VAL_MALLOCFAILED EC_ERR(5)
+#define EC_VAL_NO_RESETBASE EC_ERR(6)
+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
+
+/*---------------------------------------------------------------------------
+   Function declarations
+---------------------------------------------------------------------------*/
+extern void ec_log_error( unsigned int );
+
+#endif /* _INC_EC_ERRORS */
diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.c linux.dev/drivers/net/avalanche_cpmac/hcpmac.c
--- linux.old/drivers/net/avalanche_cpmac/hcpmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.c	2005-07-12 02:48:42.174574000 +0200
@@ -0,0 +1,1878 @@
+/******************************************************************************
+ *  TNETDxxxx Software Support
+ *  Copyright (c) 2002-2004 Texas Instruments Incorporated. All Rights Reserved.
+ *
+ *  FILE:
+ *
+ *  DESCRIPTION:
+ *      This file contains the code for the HAL EMAC Bridge Test
+ *
+ *  HISTORY:
+ *  xxXxx01 Denis            RC1.00  Original Version created.
+ *  22Jan02 Denis/Mick       RC1.01  Modified for HAL EMAC API
+ *  24Jan02 Denis/Mick       RC1.02  Speed Improvements
+ *  28Jan02 Denis/Mick       RC1.16  Made function calls pointers
+ *  28Jan02 Mick             RC1.18  Split into separate modules
+ *  29Jan02 Mick             RC1.19  Hal include file cleaned up
+ *  15Jul02 Michael Hanrahan RC1.20  Synch'd with Linux Version
+ *  23Sep02 Michael Hanrahan RC1.21  Added CPPI.C
+ *  16Oct02 Michael Hanrahan RC1.22  Added CAF etc to Options.Conf
+ *  09Jan03 Michael Hanrahan RC3.01  Fixed incorrect MDIO check
+ *  01Feb03 Michael Hanrahan RC3.02  Updated for GPIO/PBUSFREQ
+ *  29Mar03 Michael Hanrahan 1.03 Corrected  ChannelConfigGet
+ *  29Mar03 Michael Hanrahan 1.03 Removed user setting of TxNumQueues
+ *  23Aug04 Michael Hanrahan 1.7.8 Support for Setting Mac Address
+ *  @author Michael Hanrahan
+ *  @version 1.02
+ *  @date    24-Jan-2002
+ *****************************************************************************/
+#define _HAL_CPMAC
+#define _CPHAL_CPMAC
+#define _CPHAL
+#define __CPHAL_CPMDIO
+
+#include "dox_cpmac.h"  /*  Documentation information */
+
+/*  OS Data Structure definitions  */
+
+typedef void OS_PRIVATE;
+typedef void OS_DEVICE;
+typedef void OS_SENDINFO;
+typedef void OS_RECEIVEINFO;
+typedef void OS_SETUP;
+
+/*  HAL Data Structure definitions  */
+
+typedef struct _phy_device PHY_DEVICE;
+typedef struct hal_device  HAL_DEVICE;
+typedef struct hal_private HAL_PRIVATE;
+typedef struct hal_private HAL_RECEIVEINFO;
+
+#include "cpcommon_cpmac.h"
+#include "cpswhal_cpmac.h"
+#include "cpmdio.h"
+#include "hcpmac.h"
+#include "cpmac_reg.h"
+
+
+#define EC_MODULE
+
+/* MDIO Clock Frequency Default Value */
+
+/* Rcb/Tcb Constants */
+
+#define CB_SOF_BIT         (1<<31)
+#define CB_EOF_BIT         (1<<30)
+#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
+#define CB_OWNERSHIP_BIT   (1<<29)
+#define CB_EOQ_BIT         (1<<28)
+#define CB_SIZE_MASK       0x0000ffff
+#define RCB_ERRORS_MASK    0x03fe0000
+
+static char *channel_names[]   = CHANNEL_NAMES; /* GSG 11/22 (may change this implementation) */
+
+#define scFound(Module) if (HalDev->State != enDevFound)    return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
+#define scInit(Module)  if (HalDev->State <  enInitialized) return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
+#define scOpen(Module)  if (HalDev->State <  enOpened)      return (Module|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE)
+
+
+
+/********************************************************************
+**
+**  L O C A L  F U N C T I O N S
+**
+********************************************************************/
+static int halIsr(HAL_DEVICE *HalDev, int *MorePackets);
+static int cpmacRandom(HAL_DEVICE *HalDev);
+static int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max);
+static int halPacketProcessEnd(HAL_DEVICE *HalDev);
+
+#include "cpcommon_cpmac.c"                                                /*~RC3.02*/
+#include "cppi_cpmac.c"
+#include "cpmdio.c"                                                  /*~RC3.02*/
+
+static int MacAddressSave(HAL_DEVICE *HalDev, unsigned char *MacAddr)
+  {
+  int i;
+  int inst             = HalDev->inst;
+
+  HalDev->MacAddr = MacAddr;
+
+  if(HalDev->debug)
+    {
+    dbgPrintf("MacAddrSave[%d]: ", inst);
+    for (i=0;i<6;i++)
+       dbgPrintf("%X", HalDev->MacAddr[i]);
+    dbgPrintf("\n");
+    osfuncSioFlush();
+    }
+  return(EC_NO_ERRORS);
+  }
+static int MacAddressSet(HAL_DEVICE *HalDev)
+  {
+  unsigned char *macadr = &HalDev->MacAddr[0];
+  int base             = HalDev->dev_base;
+
+  scOpen(EC_CPMAC);
+  CPMAC_MACADDRLO_0(base) = macadr[5];
+  CPMAC_MACADDRMID(base)  = macadr[4];
+  CPMAC_MACADDRHI(base)   = (macadr[0])|(macadr[1]<<8)|(macadr[2]<<16)|(macadr[3]<<24);
+  if(HalDev->debug)
+    {
+     dbgPrintf("MacAddrSet: MacAddr(%d) %X %X %X\n", HalDev->inst, CPMAC_MACADDRLO_0(base),
+                                                     CPMAC_MACADDRMID(base),
+                                                     CPMAC_MACADDRHI(base));
+
+     dbgPrintf("Start MAC: %d\n",HalDev->dev_base);
+     osfuncSioFlush();
+    }
+  return(EC_NO_ERRORS);
+  }
+
+
+/*
+  Updates the MacHash registers
+*/
+static void MacHashSet(HAL_DEVICE *HalDev)
+  {
+  if(HalDev->State <  enOpened)
+    return;
+
+  CPMAC_MACHASH1(HalDev->dev_base) = HalDev->MacHash1;
+  CPMAC_MACHASH2(HalDev->dev_base) = HalDev->MacHash2;
+  if (DBG(11))
+    dbgPrintf("CPMAC[%X]: MacHash1 0x%08X, MacHash2 0x%08X\n", HalDev->dev_base, CPMAC_MACHASH1(HalDev->dev_base), CPMAC_MACHASH2(HalDev->dev_base));
+  }
+
+/*
+  Reads the MacControl register and updates
+  the changable bits. (See MACCONTROL_MASK)
+*/
+static void RxMBP_EnableSet(HAL_DEVICE *HalDev)
+  {
+   bit32u RxMbpEnable;
+   if(HalDev->State <  enOpened)
+     return;
+   RxMbpEnable  = CPMAC_RX_MBP_ENABLE(HalDev->dev_base);
+   RxMbpEnable &= ~RX_MBP_ENABLE_MASK; /* Clear out updatable bits */
+   RxMbpEnable |= HalDev->RxMbpEnable;
+   CPMAC_RX_MBP_ENABLE(HalDev->dev_base) = RxMbpEnable;
+  }
+/*
+  Reads the MacControl register and updates
+  the changable bits. (See MACCONTROL_MASK)
+*/
+static void MacControlSet(HAL_DEVICE *HalDev)
+  {
+   bit32u MacControl;
+   if(HalDev->State <  enOpened)
+     return;
+   MacControl  = CPMAC_MACCONTROL(HalDev->dev_base);
+   MacControl &= ~MACCONTROL_MASK; /* Clear out updatable bits */
+   MacControl |= HalDev->MacControl;
+   if(!(MacControl & MII_EN)) /* If Enable is not set just update register  */
+      CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
+   else
+     {
+     if(MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
+       {
+       /* mii_en is set and loopback is needed,
+          clear mii_en, set loopback, then set mii_en
+       */
+       MacControl &= ~MII_EN;  /* Clear MII_EN  */
+       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
+       CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN; /* Set MII_EN  */
+       HalDev->Linked = 1; /* if in loopback the logically linked */
+       }
+     else  /* If Loopback not set just update */
+       {
+       CPMAC_MACCONTROL(HalDev->dev_base) = MacControl;
+       }
+     }
+    if(DBG(0))
+      dbgPrintf("[halMacControlSet]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
+  }
+static int UnicastSet(HAL_DEVICE *HalDev)
+  {
+  CPMAC_RX_UNICAST_SET(HalDev->dev_base)    = HalDev->RxUnicastSet;
+  CPMAC_RX_UNICAST_CLEAR(HalDev->dev_base)  = HalDev->RxUnicastClear;
+  return(EC_NO_ERRORS);
+  }
+
+  
+static bit32u HashGet(bit8u *Address)
+  {
+  bit32u hash;
+    bit8u  tmpval;
+    int    i;
+
+    hash = 0;
+    for( i=0; i<2; i++ )
+    {
+        tmpval = *Address++;
+        hash  ^= (tmpval>>2)^(tmpval<<4);
+        tmpval = *Address++;
+        hash  ^= (tmpval>>4)^(tmpval<<2);
+        tmpval = *Address++;
+        hash  ^= (tmpval>>6)^(tmpval);
+    }
+
+    return( hash & 0x3F );
+  }
+
+static void HashAdd(HAL_DEVICE *HalDev, bit8u *MacAddress)
+{
+  bit32u HashValue;
+  bit32u HashBit;
+
+  HashValue = HashGet(MacAddress);
+
+  if(HashValue < 32)
+    {
+    HashBit = (1 << HashValue);
+    HalDev->MacHash1 |= HashBit;
+    }
+    else
+    {
+    HashBit = (1 << (HashValue-32));
+    HalDev->MacHash2 |= HashBit;
+    }
+}
+
+static void HashDel(HAL_DEVICE *HalDev, bit8u *MacAddress)
+{
+  bit32u HashValue;
+  bit32u HashBit;
+
+  HashValue = HashGet(MacAddress);
+
+  if(HashValue < 32)
+    {
+    HashBit = (1 << HashValue);
+    HalDev->MacHash1 &= ~HashBit;
+    }
+    else
+    {
+    HashBit = (1 << (HashValue-32));
+    HalDev->MacHash2 &= ~HashBit;
+    }
+}
+
+/*  Replace with an array based on key, with a ptr to the code to do */
+/* e.g.  [enRX_PASS_CRC] = {Set, MBP_UPDATE() } */
+static void DuplexUpdate(HAL_DEVICE *HalDev)
+{
+  int base           = HalDev->dev_base;
+  PHY_DEVICE *PhyDev = HalDev->PhyDev;
+
+  if(HalDev->State <  enOpened)
+    return;
+
+   /* No Phy Condition */
+   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
+   {
+       /*  No Phy condition, always linked */
+       HalDev->Linked     = 1;
+       HalDev->EmacSpeed  = 1;
+       HalDev->EmacDuplex = 1;
+       HalDev->PhyNum     = 0xFFFFFFFF;  /* No Phy Num */
+       CPMAC_MACCONTROL(base) |= FULLDUPLEX;                      /*MJH+030909*/
+       osfuncStateChange();
+       return;
+   }
+
+  if(HalDev->MacControl & CTRL_LOOPBACK)    /*  Loopback Set  */
+    {
+    HalDev->Linked = 1;
+    return;
+    }
+
+  if (HalDev->MdioConnect & _CPMDIO_LOOPBK)
+    {
+    HalDev->Linked = cpMacMdioGetLoopback(HalDev->PhyDev);
+    }
+  else
+    {
+    HalDev->Linked = cpMacMdioGetLinked(HalDev->PhyDev);
+    }
+  if (HalDev->Linked)
+    {
+     /*  Retreive Duplex and Speed and the Phy Number  */
+     if(HalDev->MdioConnect & _CPMDIO_LOOPBK)
+       HalDev->EmacDuplex = 1;
+     else
+       HalDev->EmacDuplex = cpMacMdioGetDuplex(PhyDev);
+     HalDev->EmacSpeed  = cpMacMdioGetSpeed(PhyDev);
+     HalDev->PhyNum     = cpMacMdioGetPhyNum(PhyDev);
+
+     if(HalDev->EmacDuplex)
+       CPMAC_MACCONTROL(base) |= FULLDUPLEX;
+     else
+       CPMAC_MACCONTROL(base) &= ~FULLDUPLEX;
+     if(HalDev->debug)
+        dbgPrintf("%d: Phy= %d, Speed=%s, Duplex=%s\n",HalDev->inst,HalDev->PhyNum,(HalDev->EmacSpeed)?"100":"10",(HalDev->EmacDuplex)?"Full":"Half");
+    }
+  if(HalDev->debug)
+     dbgPrintf("DuplexUpdate[%d]: MACCONTROL 0x%08X, %s\n", HalDev->inst, CPMAC_MACCONTROL(base),(HalDev->Linked)?"Linked":"Not Linked");
+}
+static void MdioSetPhyMode(HAL_DEVICE *HalDev)
+  {
+  unsigned int PhyMode;
+  /* Verify proper device state */
+  if (HalDev->State < enOpened)
+    return;
+
+  PhyMode = NWAY_AUTO|NWAY_FD100|NWAY_HD100|NWAY_FD10|NWAY_HD10;
+  if(DBG(0))
+    {
+    dbgPrintf("halSetPhyMode1: MdioConnect:%08X ,", HalDev->MdioConnect);
+    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
+           PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
+           PhyMode&NWAY_HD100);
+    }
+
+
+  if (  HalDev->MdioConnect & _CPMDIO_NEG_OFF)  /* ~RC3.01                */
+    PhyMode &= ~(NWAY_AUTO);                    /* Disable Auto Neg       */
+  if (!(HalDev->MdioConnect & _CPMDIO_HD))
+    PhyMode &= ~(NWAY_HD100|NWAY_HD10);         /* Cannot support HD      */
+  if (!(HalDev->MdioConnect & _CPMDIO_FD))
+    PhyMode &= ~(NWAY_FD100|NWAY_FD10);         /* Cannot support FD      */
+  if (!(HalDev->MdioConnect & _CPMDIO_10))
+    PhyMode &= ~(NWAY_HD10|NWAY_FD10);          /* Cannot support 10 Mbs  */
+  if (!(HalDev->MdioConnect & _CPMDIO_100))
+    PhyMode &= ~(NWAY_HD100|NWAY_FD100);        /* Cannot support 100 Mbs */
+
+  if(HalDev->MdioConnect & _CPMDIO_AUTOMDIX)   PhyMode |= NWAY_AUTOMDIX; /* Set AutoMdix */
+
+  if (HalDev->CpmacFrequency <= 50000000)
+    PhyMode &= ~(NWAY_FD100|NWAY_HD100); /* Cannot support 100 MBS */
+  if(DBG(7))
+    dbgPrintf("halNeg: PhyMode[0x%08X] %d\n", HalDev->dev_base, PhyMode);
+
+  if(DBG(0))
+    {
+    dbgPrintf("halSetPhyMode2: MdioConnect:%08X ,", HalDev->MdioConnect);
+    dbgPrintf("PhyMode:%08X Auto:%d, FD10:%d, HD10:%d, FD100:%d, HD100:%d\n", PhyMode,
+               PhyMode&NWAY_AUTO, PhyMode&NWAY_FD10, PhyMode&NWAY_HD10, PhyMode&NWAY_FD100,
+               PhyMode&NWAY_HD100);
+    }
+
+
+  cpMacMdioSetPhyMode(HalDev->PhyDev,PhyMode);
+  DuplexUpdate(HalDev);
+  }
+static int StatsClear(HAL_DEVICE *HalDev)
+{
+  int i;
+  MEM_PTR pStats;
+
+  scOpen(EC_CPMAC);
+
+  pStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
+  for (i=0;i<STATS_MAX;i++)
+    {
+    *(MEM_PTR)(pStats) =  0xFFFFFFFF;
+    pStats++;
+    }
+
+  return(EC_NO_ERRORS);
+}
+static void StatsDump(HAL_DEVICE *HalDev, void *Value)
+ {
+ MEM_PTR ptrStats;
+ MEM_PTR ptrValue;
+ int i;
+ ptrStats = pCPMAC_RXGOODFRAMES(HalDev->dev_base);
+ ptrValue = (bit32u*) Value;
+ for (i=0; i<STATS_MAX; i++)
+  {
+     *ptrValue = *ptrStats;
+     if(DBG(4))
+      {
+      dbgPrintf("halStatsDump: Stat[%d:0x%08X] %d 0x%08X %d\n", i, ptrStats, *ptrStats, ptrValue, *ptrValue);
+      osfuncSioFlush();
+      }
+     ptrStats++;
+     ptrValue++;
+  }
+ }
+static void ConfigApply(HAL_DEVICE *HalDev)
+  {
+  CPMAC_RX_MAXLEN(HalDev->dev_base)          = HalDev->RxMaxLen;
+  CPMAC_RX_FILTERLOWTHRESH(HalDev->dev_base) = HalDev->RxFilterLowThresh;
+  CPMAC_RX0_FLOWTHRESH(HalDev->dev_base)     = HalDev->Rx0FlowThresh;
+  UnicastSet(HalDev);
+  MacAddressSet(HalDev);
+  RxMBP_EnableSet(HalDev);
+  MacHashSet(HalDev);
+  MacControlSet(HalDev);
+  if(DBG(0))
+     dbgPrintf("ValuesUpdate[%d]: MBP_ENABLE 0x%08X\n", HalDev->inst, CPMAC_RX_MBP_ENABLE(HalDev->dev_base));
+  }
+static int halStatus(HAL_DEVICE *HalDev)
+{
+   int status;
+
+    if(HalDev->State <  enOpened)
+      return (EC_CPMAC|EC_FUNC_STATUS|EC_VAL_INVALID_STATE);      /*MJH+030805*/
+
+   /* No Phy Condition */
+   if(HalDev->MdioConnect & _CPMDIO_NOPHY)                        /*MJH+030805*/
+   {
+       /*  No Phy condition, always linked */
+       status = HalDev->Linked;
+       status |= CPMAC_STATUS_LINK_DUPLEX;
+       status |= CPMAC_STATUS_LINK_SPEED;
+       return(status);
+   }
+
+
+   if (HalDev->HostErr)  /* Adapter Check  */
+    {
+    bit32u tmp;
+    status = CPMAC_STATUS_ADAPTER_CHECK;
+    if(HalDev->MacStatus & RX_HOST_ERR_CODE)
+      {
+      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
+      tmp     = (HalDev->MacStatus & RX_HOST_ERR_CODE) >> 12; /* Code */
+      status |= (tmp << 9); /* Code */
+      tmp     = (HalDev->MacStatus & RX_ERR_CH) >> 8; /* Channel */
+      status |= (tmp << 13);
+      }
+    else
+    if(HalDev->MacStatus & TX_HOST_ERR_CODE)
+      {
+      status |= CPMAC_STATUS_HOST_ERR_DIRECTION;
+      tmp     = (HalDev->MacStatus & TX_HOST_ERR_CODE) >> 20; /* Code */
+      status |= (tmp << 9); /* Code */
+      tmp     = (HalDev->MacStatus & TX_ERR_CH) >> 16; /* Channel */
+      status |= (tmp << 13);
+      }
+    }
+   else
+    {
+    status = HalDev->Linked;
+    if(status)
+      {
+      status = CPMAC_STATUS_LINK;
+      if(cpMacMdioGetDuplex(HalDev->PhyDev))
+        status |= CPMAC_STATUS_LINK_DUPLEX;
+      if(cpMacMdioGetSpeed(HalDev->PhyDev))
+        status |= CPMAC_STATUS_LINK_SPEED;
+      }
+    }
+   if(HalDev->debug)
+      dbgPrintf("[halStatus] Link Status is %d for 0x%X\n", status, HalDev->dev_base);
+   return(status);
+}
+static int InfoAccess(HAL_DEVICE *HalDev, int Key, int Action, void *ParmValue)
+  {
+  int rc = 0;
+  int Update=0;
+
+  switch (Key)
+  {
+    /********************************************************************/
+    /*                                                                  */
+    /*                      GENERAL                                     */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enVersion :
+         if(Action==enGET)
+           {
+           *(const char **)ParmValue = pszVersion_CPMAC;
+           }
+    break;
+    case enDebug  :
+         if(Action==enSET)
+           {
+           HalDev->debug = *(unsigned int *)ParmValue;
+           }
+    break;
+
+    case enStatus      :
+         if(Action==enGET)
+           {
+           int status;
+           status = halStatus(HalDev);
+           *(int *)ParmValue = status;
+           }
+    break;
+    /********************************************************************/
+    /*                                                                  */
+    /*                      RX_MBP_ENABLE                               */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enRX_PASS_CRC  :
+         if(Action==enSET)
+           {
+           UPDATE_RX_PASS_CRC(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_QOS_EN  :
+         if(Action==enSET)
+           {
+           UPDATE_RX_QOS_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_NO_CHAIN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_NO_CHAIN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_CMF_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_CMF_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_CSF_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_CSF_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_CEF_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_CEF_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_CAF_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_CAF_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_PROM_CH :
+         if(Action==enSET)
+           {
+           UPDATE_RX_PROM_CH(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_BROAD_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_BROAD_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_BROAD_CH :
+         if(Action==enSET)
+           {
+           UPDATE_RX_BROAD_CH(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_MULT_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_MULT_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_MULT_CH :
+         if(Action==enSET)
+           {
+           UPDATE_RX_MULT_CH(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+
+    /********************************************************************/
+    /*                                                                  */
+    /*                      MAC_CONTROL                                 */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enTX_PTYPE :
+         if(Action==enSET)
+           {
+           UPDATE_TX_PTYPE(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enTX_PACE :
+         if(Action==enSET)
+           {
+           UPDATE_TX_PACE(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enTX_FLOW_EN :
+         if(Action==enSET)
+           {
+           UPDATE_TX_FLOW_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_FLOW_EN :
+         if(Action==enSET)
+           {
+           UPDATE_RX_FLOW_EN(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+
+    case enCTRL_LOOPBACK :
+         if(Action==enSET)
+           {
+           UPDATE_CTRL_LOOPBACK(*(unsigned int *)ParmValue);
+           Update=1;
+           }
+    break;
+    /********************************************************************/
+    /*                                                                  */
+    /*                      RX_UNICAST_SET                              */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enRX_UNICAST_SET :
+         if(Action==enSET)
+          {
+           HalDev->RxUnicastSet   |=  (1 << *(unsigned int *)ParmValue);
+           HalDev->RxUnicastClear &= ~(1 << *(unsigned int *)ParmValue);
+           Update=1;
+          }
+    break;
+    case enRX_UNICAST_CLEAR :
+         if(Action==enSET)
+          {
+          HalDev->RxUnicastClear |=  (1 << *(unsigned int *)ParmValue);
+          HalDev->RxUnicastSet   &= ~(1 << *(unsigned int *)ParmValue);
+          Update=1;
+          }
+    break;
+
+    case enRX_MAXLEN :
+         if(Action==enSET)
+           {
+           HalDev->RxMaxLen    =   *(unsigned int *)ParmValue;
+           Update=1;
+           }
+    break;
+
+    case enRX_FILTERLOWTHRESH :
+         if(Action==enSET)
+           {
+           HalDev->RxFilterLowThresh  =   *(unsigned int *)ParmValue;
+           Update=1;
+           }
+    break;
+    case enRX0_FLOWTHRESH :
+         if(Action==enSET)
+           {
+           HalDev->Rx0FlowThresh =   *(unsigned int *)ParmValue;
+           Update=1;
+           }
+    break;
+    /********************************************************************/
+    /*                                                                  */
+    /*                      RX_MULTICAST                                */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enRX_MULTICAST :
+    break;
+    case enRX_MULTI_SINGLE :
+         if(DBG(11))
+          {
+           int tmpi;
+           bit8u *MacAddress;
+           MacAddress = (bit8u *) ParmValue;
+           dbgPrintf("CPMAC[%X]:  MacAddress '", HalDev->dev_base);
+           for (tmpi=0; tmpi<6; tmpi++)
+             dbgPrintf("%02X:", MacAddress[tmpi]);
+             dbgPrintf("\n");
+          }
+         if(Action==enCLEAR)
+           {
+           HashDel(HalDev, ParmValue);
+           Update=1;
+           }
+         else
+         if(Action==enSET)
+           {
+           HashAdd(HalDev, ParmValue);
+           Update=1;
+           }
+    break;
+    case enRX_MULTI_ALL :
+         if(Action==enCLEAR)
+           {
+           HalDev->MacHash1 = 0;
+           HalDev->MacHash2 = 0;
+           Update=1;
+           }
+         else
+         if(Action==enSET)
+           {
+           HalDev->MacHash1 = 0xFFFFFFFF;
+           HalDev->MacHash2 = 0xFFFFFFFF;
+           Update=1;
+           }
+    break;
+
+    /********************************************************************/
+    /*                                                                  */
+    /*                      MDIO                                        */
+    /*                                                                  */
+    /********************************************************************/
+
+    case enMdioConnect :
+         if(Action==enSET)
+           {
+           HalDev->MdioConnect = *(unsigned int *)ParmValue;
+           MdioSetPhyMode(HalDev);
+           }
+           if(Action==enGET)
+           {
+           *(unsigned int *)ParmValue = HalDev->MdioConnect;
+           }
+    break;
+
+
+    /********************************************************************/
+    /*                                                                  */
+    /*                      STATISTICS                                  */
+    /*                                                                  */
+    /********************************************************************/
+    case enStatsClear :
+           StatsClear(HalDev);
+    break;
+    case enStatsDump :
+         if(Action==enGET)
+           {
+           StatsDump(HalDev, ParmValue);
+           }
+    break;
+
+/*  Not implemented
+    case enStats1 :
+         if(Action==enGET)
+           {
+           StatsGet(HalDev, ParmValue, 1);
+           }
+    break;
+
+    case enStats2 :
+         if(Action==enGET)
+           {
+           StatsGet(HalDev, ParmValue, 2);
+           }
+    break;
+    case enStats3 :
+         if(Action==enGET)
+           {
+           StatsGet(HalDev, ParmValue, 3);
+           }
+    break;
+    case enStats4 :
+         if(Action==enGET)
+           {
+           StatsGet(HalDev, ParmValue, 4);
+           }
+    break;
+
+*/
+
+    default:
+    rc = EC_CPMAC|EC_FUNC_OPTIONS|EC_VAL_KEY_NOT_FOUND;
+    break;
+  }
+
+  /* Verify proper device state */
+  if (HalDev->State == enOpened)
+    switch (Update)
+      {
+      case 1 :
+           ConfigApply(HalDev);
+      break;
+      default:
+      break;
+      }
+
+  return (rc);
+  }
+static const char pszStats[]       = "Stats;";
+
+static int halControl(HAL_DEVICE *HalDev, const char *pszKey, const char *pszAction, void *Value)
+  {
+  int i;
+  int rc=0;
+  int Action;
+  int ActionFound;
+  int KeyFound;
+
+#ifdef __CPHAL_DEBUG
+  if (DBG(1))
+    {
+    dbgPrintf("\nhalControl-HalDev:%08X,Action:%s,Key:%s\n", (bit32u)HalDev, pszAction, pszKey);
+    }
+#endif
+
+  /* 23Aug04 - BCIL needs to set Mac Address  */
+  if(HalDev->OsFunc->Strcmpi(pszKey, pszMacAddr) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+        unsigned char *MacAddr;  
+        MacAddr = (unsigned char *) Value;  
+        MacAddressSave(HalDev, MacAddr); 
+        MacAddressSet(HalDev);       
+        return(0);
+      }
+    else
+      {
+       return(-1);
+      }
+    }
+     
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcLinked) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+        HalDev->Linked = *(int *)Value;
+        return(0);
+      }
+    else
+      {
+       return(-1);
+      }
+    }
+  
+  if(HalDev->OsFunc->Strcmpi(pszKey, "TxIntDisable") == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+        HalDev->TxIntDisable = *(int *)Value;
+        if(HalDev->TxIntDisable && (HalDev->State == enOpened))
+          {
+              /* if Opened and need TxIntDisabled, clear Ints for Channel 0 */
+              CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 1;             
+          }        
+        return(0);
+      }
+    else
+      {
+       return(-1);
+      }
+    }
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyAccess) == 0)
+    {
+    bit32u RegAddr;
+    bit32u PhyNum;
+    bit32u Data;
+    bit32u ValueIn;
+
+    ValueIn = *(bit32u*) Value;
+
+    KeyFound=1;
+    /* Cannot access MII if not opended */
+
+    if(HalDev->State < enOpened)
+      return(-1);
+
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+      {
+
+      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
+      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits */
+
+      *(bit32u*)Value = _mdioUserAccessRead(HalDev->PhyDev, RegAddr, PhyNum);
+
+      return(0);
+      } /* end of hcGet */
+
+
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+      PhyNum  = (ValueIn & 0x1F);        /* Phynum 0-32 */
+      RegAddr = (ValueIn >> 5) & 0xFF;   /* RegAddr in upper 11 bits of lower 16 */
+
+      Data    = ValueIn >> 16;           /* Data store in upper 16 bits */
+
+      _mdioUserAccessWrite(HalDev->PhyDev, RegAddr, PhyNum, Data);
+      return(0);
+      }
+    } /*  End of hcPhyAccess */
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcPhyNum) == 0)
+    {
+    KeyFound=1;
+    if(!HalDev->Linked)
+      return(-1);  /* if not linked the no Phy Connected */
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+      {
+        *(int *)Value = HalDev->PhyNum;
+      return(0);
+      }
+    }
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacSize) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+      {
+        *(bit32u *)Value = HalDev->CpmacSize;
+      return(0);
+      }
+    }
+
+   if(HalDev->OsFunc->Strcmpi(pszKey, hcCpmacBase) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+      {
+        *(int *)Value = HalDev->dev_base;
+      return(0);
+      }
+    }
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcFullDuplex) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+        UPDATE_FULLDUPLEX(*(unsigned int *)Value);
+        if(HalDev->State == enOpened)
+           ConfigApply(HalDev);
+      return(0);
+      }
+    else
+      return(-1);
+    }
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, pszDebug) == 0)
+    {
+    KeyFound=1;
+    if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+      {
+        ActionFound=1;
+        HalDev->debug = *(int *)Value;
+      }
+    }
+
+  if(HalDev->OsFunc->Strcmpi(pszKey, hcMaxFrags) == 0)
+    {
+     KeyFound=1;
+     if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+       {
+        ActionFound=1;
+
+        if ((*(int *)Value) > 0)
+          HalDev->MaxFrags = *(int *)Value;
+         else
+          rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
+      }
+
+     if (HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+       {
+        ActionFound=1;
+
+        *(int *)Value = HalDev->MaxFrags;
+       }
+    }
+
+  if(HalDev->OsFunc->Strstr(pszKey, pszStats) != 0)
+    {
+     KeyFound=1;
+     if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+         {
+       int Level;
+       int Ch;
+       char *TmpKey = (char *)pszKey;
+       ActionFound=1;
+       TmpKey += HalDev->OsFunc->Strlen(pszStats);
+       Level   = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
+       TmpKey++;
+       Ch      = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
+       TmpKey++;
+       osfuncSioFlush();
+#ifdef __CPHAL_DEBUG
+  if (DBG(1))
+    {
+    dbgPrintf("\nhalControl-HalDev:%08X, Level:%d, Ch:%d\n", (bit32u)HalDev, Level, Ch);
+    }
+#endif
+         StatsGet(HalDev, (void **)Value, Level, Ch, 0);
+       osfuncSioFlush();
+         }
+    }
+
+
+  if(HalDev->OsFunc->Strcmpi(pszAction, hcSet) == 0)
+    Action = enSET;
+  else
+  if(HalDev->OsFunc->Strcmpi(pszAction, hcClear) == 0)
+    Action = enCLEAR;
+  else
+  if(HalDev->OsFunc->Strcmpi(pszAction, hcGet) == 0)
+    Action = enGET;
+  else
+    Action = enNULL;
+
+
+
+  for(i=enCommonStart+1;i<enCommonEnd;i++)
+    {
+    if(HalDev->OsFunc->Strcmpi(KeyCommon[i].strKey, pszKey)==0)
+      {
+      rc = InfoAccess(HalDev, KeyCommon[i].enKey, Action, Value);
+      }
+    }
+  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
+    {
+    if(HalDev->OsFunc->Strcmpi(KeyCpmac[i].strKey, pszKey)==0)
+      {
+      rc = InfoAccess(HalDev, KeyCpmac[i].enKey, Action, Value);
+      }
+    }
+/*
+  if (KeyFound == 0)
+    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
+
+  if (ActionFound == 0)
+    rc = (EC_MODULE|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
+*/
+
+  return(rc);
+  }
+static bit32u ConfigGet(HAL_DEVICE *HalDev)
+  {
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+  char *DeviceInfo     = HalDev->DeviceInfo;
+  int i                = HalDev->inst;
+  bit32u Value;
+  int Error;
+
+  /* get the configuration parameters common to all modules */
+  Error = ConfigGetCommon(HalDev);
+  if (Error) return (EC_CPMAC|Error);
+
+  if (HalDev->debug)
+    {
+      dbgPrintf("ConfigGet: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
+      osfuncSioFlush();
+    }
+
+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, pszMdioConnect,&Value); /*MJH+030805*/
+  if(!Error) HalDev->MdioConnect = Value;
+
+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "PhyMask",&Value);
+  if(!Error) HalDev->PhyMask = Value;
+
+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, "MLink",&Value);
+  if(!Error) HalDev->MLinkMask = Value;
+
+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcMdixMask, &Value);
+  if(!Error)
+    HalDev->MdixMask = Value;
+  else
+    HalDev->MdixMask = 0;
+
+  Error = OsFunc->DeviceFindParmUint(DeviceInfo, hcSize, &Value); /*MJH+030425*/
+  if(!Error) HalDev->CpmacSize = Value;
+
+  for(i=enCommonStart+1;i<enCommonEnd;i++)
+    {
+    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCommon[i].strKey, (bit32u*)&Value);
+    if(!Error)
+      {
+      InfoAccess(HalDev, KeyCommon[i].enKey, enSET, (bit32u*)&Value);
+      }
+    }
+  for(i=enCpmacStart+1;i<enCpmacEnd;i++)
+    {
+    Error = OsFunc->DeviceFindParmUint(DeviceInfo, KeyCpmac[i].strKey, (bit32u*)&Value);
+    if(!Error)
+      {
+      InfoAccess(HalDev, KeyCpmac[i].enKey, enSET, (bit32u*)&Value);
+      }
+    }
+   return (EC_NO_ERRORS);
+  }
+
+
+static void ConfigInit(HAL_DEVICE *HalDev)
+  {
+  if(HalDev->inst == 0)
+    {
+     HalDev->dev_base  = 0xA8610000;
+     HalDev->ResetBit  = 17;
+     HalDev->interrupt = 19;
+     HalDev->MLinkMask = 0;
+     HalDev->PhyMask   = 0xAAAAAAAA;
+    }
+  else
+    {
+     HalDev->dev_base  = 0xA8612800;
+     HalDev->ResetBit  = 21;
+     HalDev->interrupt = 33;                                         /*~RC3.02*/
+     HalDev->MLinkMask = 0;
+     HalDev->PhyMask   = 0x55555555;
+    }
+  HalDev->RxMaxLen    = 1518;
+  HalDev->MaxFrags    = 2;
+  HalDev->MdioConnect = _CPMDIO_HD|_CPMDIO_FD|_CPMDIO_10|_CPMDIO_100|_CPMDIO_AUTOMDIX;
+  HalDev->debug=0xFFFFFFFF;
+  HalDev->debug=0;
+  }
+/* Shuts down the EMAC device
+ *
+ *@param HalDev EMAC instance. This was returned by halOpen()
+ *@param mode Indicates actions to tak on close.
+ <br>
+ *PARTIAL - Disable EMAC
+ <br>
+ *FULL    - Disable EMAC and call OS to free all allocated memory
+ *
+ *@retval
+ *        0 OK
+ <br>
+ *        Non-Zero Not OK
+ *
+ */
+static int halInit( HAL_DEVICE *HalDev)
+  {
+   int rc;
+
+  /* Verify proper device state */
+  if (HalDev->State != enDevFound)
+    return(EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
+
+  /* Configure HAL defaults */
+  ConfigInit(HalDev);
+
+  /* Retrieve HAL configuration parameters from data store */
+  rc = ConfigGet(HalDev);
+  if (rc) return (rc);
+
+  /* Updated 030403*/
+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpuFrequency, hcGet, &HalDev->CpuFrequency); /*MJH+030403*/
+  if(rc)
+    HalDev->CpuFrequency = 20000000;  /*20 Mhz default */         /*MJH+030403*/
+
+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcCpmacFrequency, hcGet, &HalDev->CpmacFrequency); /*MJH+030331*/
+  if(rc)
+    HalDev->CpmacFrequency = HalDev->CpuFrequency/2;               /*MJH~030404*/
+
+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioBusFrequency,  hcGet, &HalDev->MdioBusFrequency);  /*MJH+030402*/
+  if(rc)
+    HalDev->MdioBusFrequency = HalDev->CpmacFrequency;
+
+  rc = HalDev->OsFunc->Control(HalDev->OsDev, hcMdioClockFrequency,  hcGet, &HalDev->MdioClockFrequency);  /*MJH+030402*/
+  if(rc)
+    HalDev->MdioClockFrequency = 2200000; /* 2.2 Mhz PITS #14 */
+
+
+  /* update device state */
+  HalDev->State = enInitialized;
+
+  /* initialize statistics */
+  StatsInit(HalDev);                                                  /* +RC3.02 */
+
+  /*                                                                  -RC3.02
+  StatsTable3[0].StatPtr  = &HalDev->ChData[0].RxBufSize;
+  StatsTable3[1].StatPtr  = &HalDev->ChData[0].RxBufferOffset;
+  StatsTable3[2].StatPtr  = &HalDev->ChData[0].RxNumBuffers;
+  StatsTable3[3].StatPtr  = &HalDev->ChData[0].RxServiceMax;
+  StatsTable3[4].StatPtr  = &HalDev->ChData[0].TxNumBuffers;
+  StatsTable3[5].StatPtr  = &HalDev->ChData[0].TxNumQueues;
+  StatsTable3[6].StatPtr  = &HalDev->ChData[0].TxServiceMax;
+  */
+
+  return(EC_NO_ERRORS);
+  }
+static int halProbe(HAL_DEVICE *HalDev)
+  {
+  int inst             = HalDev->inst;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+  int error_code;
+
+  if (HalDev->State != enConnected)
+     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
+
+  if(HalDev->debug) dbgPrintf("halProbe: %d ",inst);
+
+  error_code = OsFunc->DeviceFindInfo(inst,"cpmac",&HalDev->DeviceInfo);
+
+  if(error_code)
+     return (EC_CPMAC|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND );
+
+  /* Set device state to DevFound */
+  HalDev->State = enDevFound;
+  return(EC_NO_ERRORS);
+  }
+static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
+  {
+  int Ch        = HalChn->Channel;
+  int Direction = HalChn->Direction;
+  int nTxBuffers = 256;
+
+  if (Direction == DIRECTION_TX)
+    {
+    HalDev->ChData[Ch].TxNumBuffers   = nTxBuffers;
+    HalDev->ChData[Ch].TxNumQueues    = 1;
+    HalDev->ChData[Ch].TxServiceMax   = nTxBuffers/3;
+    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
+    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
+    }
+
+  if (Direction == DIRECTION_RX)
+    {
+    HalDev->ChData[Ch].RxNumBuffers   = nTxBuffers*2;
+    HalDev->ChData[Ch].RxBufferOffset = 0;
+    HalDev->ChData[Ch].RxBufSize      = 1518;
+    HalDev->ChData[Ch].RxServiceMax   = nTxBuffers/3; /*Not a typo*/
+    }
+  }
+static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
+  {
+   int Ch        = HalChn->Channel;
+   int Direction = HalChn->Direction;
+
+   if (DBG(11))
+     {
+      dbgPrintf("halChannelConfigApply[%d:%d] haldev:0x%08X inst:%d base:0x%08X reset:%d\n", Ch, Direction, (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
+      osfuncSioFlush();
+     }
+
+   if (Direction == DIRECTION_TX)
+   {
+     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
+     {
+      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_TX_CH_ALREADY_OPEN);
+     }
+
+     /* Initialize Queue Data */
+     HalDev->TxActQueueHead[Ch][0]  = 0;
+     HalDev->TxActQueueCount[Ch][0] = 0;
+     HalDev->TxActive[Ch][0]        = FALSE;
+
+     /* Need to use a macro that takes channel as input */
+     CPMAC_TX0_HDP(HalDev->dev_base)=0;
+
+     /* Initialize buffer memory for the channel */
+     InitTcb(HalDev, Ch);
+
+     if(!HalDev->TxIntDisable)
+       CPMAC_TX_INTMASK_SET(HalDev->dev_base) = (1<<Ch); /* GSG 11/22 */
+   }
+   else
+   {
+     if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
+     {
+      return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_RX_CH_ALREADY_OPEN);
+     }
+
+     /* Initialize Queue Data */
+     HalDev->RxActQueueHead[Ch]     = 0;
+     HalDev->RxActQueueCount[Ch]    = 0;
+
+     HalDev->RxActive[Ch]           = FALSE;
+
+     /* Need to use a macro that takes channel as input */
+     CPMAC_RX0_HDP(HalDev->dev_base)=0;
+
+     /* Initialize buffer memory for the channel */
+     InitRcb(HalDev, Ch);
+
+     CPMAC_RX_INTMASK_SET(HalDev->dev_base)  = (1<<Ch); /* GSG 11/22 */
+   }
+
+   HalDev->ChIsOpen[Ch][Direction] = TRUE; /* channel is open */
+
+   return (EC_NO_ERRORS);
+  }
+
+/* GSG 11/22
+ * Retrieves channel parameters from configuration file.  Any parameters
+ * which are not found are ignored, and the HAL default value will apply,
+ * unless a new value is given through the channel structure in the call
+ * to ChannelSetup.
+ */
+static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
+  {
+  int Ch        = HalChn->Channel;
+  int Direction = HalChn->Direction;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+  unsigned int rc, Value;
+  void *ChInfo;
+
+   rc=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
+   /*  Do not fail if Channel Info not available for RC2 */
+   if (rc) return(0);
+/*   if (rc) return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);*/
+
+   /* i don't care if a value is not found because they are optional */
+   if(Direction == DIRECTION_TX)
+     {
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
+     if (!rc) HalDev->ChData[Ch].TxNumBuffers = Value;
+
+     /*rc=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);*/ /*MJH-030329*/
+     /*if (!rc) HalDev->ChData[Ch].TxNumQueues = Value;*/              /*MJH-030329*/
+
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
+     if (!rc) 
+       {
+         HalDev->ChData[Ch].TxServiceMax = Value;
+         HalDev->TxIntThreshold[Ch]      = HalDev->ChData[Ch].TxServiceMax;
+         HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
+       }
+     }
+   if(Direction == DIRECTION_RX)
+     {
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
+     if (!rc) HalDev->ChData[Ch].RxNumBuffers = Value;
+
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
+     if (!rc) HalDev->ChData[Ch].RxBufferOffset = Value;
+
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
+     if (!rc) HalDev->ChData[Ch].RxBufSize = Value;
+
+     rc=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
+     if (!rc) HalDev->ChData[Ch].RxServiceMax = Value;
+     }
+   return (EC_NO_ERRORS);
+  }
+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
+
+static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
+  {
+  int Ch        = HalChn->Channel;
+  int Direction = HalChn->Direction;
+#ifdef __CPHAL_DEBUG
+  if (DBG(1))
+    {
+    dbgPrintf("\nChnUpd-HalDev:%08X,Chn:%d:%d\n", (bit32u)HalDev, Ch, Direction); osfuncSioFlush();
+    }
+#endif
+  if (Direction == DIRECTION_TX)
+    {
+    ChannelUpdate(TxNumBuffers);
+    /*ChannelUpdate(TxNumQueues);*/                               /*MJH~030329*/
+    ChannelUpdate(TxServiceMax);
+    HalDev->TxIntThreshold[Ch]        = HalDev->ChData[Ch].TxServiceMax;
+    HalDev->TxIntThresholdMaster[Ch]  = HalDev->TxIntThreshold[Ch];
+    }
+  else
+  if (Direction == DIRECTION_RX)
+    {
+    ChannelUpdate(RxBufferOffset);
+    ChannelUpdate(RxBufSize);
+    ChannelUpdate(RxNumBuffers);
+    ChannelUpdate(RxServiceMax);
+#ifdef __CPHAL_DEBUG
+  if (DBG(1))
+    {
+    dbgPrintf("\nRxNumBuffers %d\n",HalChn->RxNumBuffers); osfuncSioFlush();
+    }
+#endif
+    }
+  }
+static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn, OS_SETUP *OsSetup)
+  {
+  int Direction;
+  int Ch;
+  int rc;
+
+  /* Verify proper device state */
+  if (HalDev->State < enInitialized)
+    return (EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
+
+  /* We require the channel structure to be passed, even if it only contains
+     the channel number */
+  if (HalChn == NULL)
+    {
+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
+    }
+
+  Ch        = HalChn->Channel;
+  Direction = HalChn->Direction;
+
+  /* This should check on Maximum Channels for RX or TX,
+     they might be different Mick 021124 */
+  if ((Ch < 0) || (Ch > (MAX_CHAN-1)))
+    {
+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
+    }
+
+  /* if channel is already open, this call is invalid */
+  if (HalDev->ChIsOpen[Ch][Direction] == TRUE)
+    {
+     return(EC_CPMAC|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
+    }
+
+  /* channel is closed, but might be setup.  If so, reopen the hardware channel. */
+  if (HalDev->ChIsSetup[Ch][Direction] == FALSE)
+    {
+     /* Setup channel configuration */
+     HalDev->ChData[Ch].Channel = Ch;
+
+     /* Store OS_SETUP */
+     HalDev->ChData[Ch].OsSetup = OsSetup;
+
+     /*  Framework :
+         Set Default Values
+         Update with options.conf
+     Apply driver updates
+     */
+     ChannelConfigInit(HalDev, HalChn);
+     ChannelConfigGet(HalDev, HalChn);
+     ChannelConfigUpdate(HalDev, HalChn);
+
+     /* cppi.c needs to use Rx/TxServiceMax */
+     HalDev->BuffersServicedMax  = 169;  /* TEMP */
+
+     HalDev->ChIsSetup[Ch][Direction] = TRUE;
+    }
+
+  rc = EC_NO_ERRORS;
+
+  /* If the hardware has been opened (is out of reset), then configure the channel
+     in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
+  if (HalDev->State == enOpened)
+    {
+     rc = ChannelConfigApply(HalDev, HalChn);
+    }
+
+  return (rc);
+  }
+
+
+static int miiInfoGet(HAL_DEVICE *HalDev, bit32u *miiBaseAddress, bit32u *miiResetBit)
+  {
+  int rc;
+  void *DeviceInfo;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+
+  /*  Only one instance of cpmdio   */
+  rc = OsFunc->DeviceFindInfo(0,"cpmdio",&DeviceInfo);               /*~RC3.02*/
+
+  if(rc)
+     return (EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_DEVICE_NOT_FOUND );
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",miiBaseAddress);
+  if(rc)
+      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",miiResetBit);
+  if(rc)
+      rc=EC_DEV_CPMDIO|EC_FUNC_OPEN|EC_VAL_NO_BASE;
+
+
+  /* See if need to make mdio functional in GPIO */
+  gpioCheck(HalDev, DeviceInfo);
+
+  if(DBG(0))
+    dbgPrintf("miiBase: 0x%08X %u\n", *miiBaseAddress, *miiResetBit);
+  return(rc);
+  }
+static void ephyCheck(HAL_DEVICE *HalDev)
+  {                                                                  /*+RC3.02*/
+  int rc;
+  void *DeviceInfo;
+  int mii_phy;
+  int reset_bit;
+  OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
+
+  rc = OsFunc->DeviceFindInfo(0,"ephy",&DeviceInfo);
+  if(rc) return;
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "mii_phy",&mii_phy);
+  if(rc) return;
+
+  rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
+  if(rc) return;
+
+  if (HalDev->PhyMask & (1 << mii_phy))
+    {
+    *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << reset_bit);                      /*+RC3.02*/
+    resetWait(HalDev);
+    }
+  }                                                                  /*+RC3.02*/
+static void AutoNegotiate(HAL_DEVICE *HalDev)
+  {
+  int size;
+  bit32u ModID,  RevMaj,  RevMin;
+  PHY_DEVICE *PhyDev;
+  bit32u miiBaseAddress;
+  bit32u miiResetBit;
+
+  /* Verify proper device state */
+  if (HalDev->State < enOpened)
+    return;
+
+  miiInfoGet(HalDev, &miiBaseAddress, &miiResetBit);
+
+  cpMacMdioGetVer(miiBaseAddress, &ModID,  &RevMaj,  &RevMin);
+  if(HalDev->debug)
+     dbgPrintf("Mdio Module Id %d, Version %d.%d\n", ModID,  RevMaj,  RevMin);
+
+  size = cpMacMdioGetPhyDevSize();
+  PhyDev = (PHY_DEVICE *) HalDev->OsFunc->Malloc( size );
+
+  HalDev->PhyDev = PhyDev;
+
+  ephyCheck(HalDev);
+
+  cpMacMdioInit( PhyDev, miiBaseAddress, HalDev->inst, HalDev->PhyMask, HalDev->MLinkMask, HalDev->MdixMask, HalDev->ResetBase, miiResetBit, HalDev->MdioBusFrequency, HalDev->MdioClockFrequency, HalDev->debug, HalDev); /*MJH~030402*/
+  MdioSetPhyMode(HalDev);
+
+  return;
+  }
+static int halOpen(HAL_DEVICE *HalDev)
+  {
+  unsigned char *MacAddr;
+  int i;
+  int j;
+  int rc, Ticks;
+
+  if (HalDev->debug)
+    {
+      dbgPrintf("halOpen: haldev:0x%08X inst:%d base:0x%08X reset:%d\n", (bit32u) &HalDev, HalDev->inst, HalDev->dev_base, HalDev->ResetBit);
+      osfuncSioFlush();
+    }
+
+   /* Verify proper device state */
+   if (HalDev->State < enInitialized)
+     return (EC_CPMAC|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
+
+
+  /* take CPMAC out of reset - GSG 11/20*/
+  if ((VOLATILE32(HalDev->ResetBase) & (1 << HalDev->ResetBit)) != 0)
+    {
+     /* perform normal close duties */
+     CPMAC_MACCONTROL(HalDev->dev_base) &= ~MII_EN;
+     CPMAC_TX_CONTROL(HalDev->dev_base) &= ~TX_EN;
+     CPMAC_RX_CONTROL(HalDev->dev_base) &= ~RX_EN;
+
+     /* disable interrupt masks */
+     CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
+     CPMAC_RX_INTMASK_CLEAR(HalDev->dev_base) = 0xFF;
+    }
+
+   /* take CPMAC out of reset */
+   *(volatile bit32u *)(HalDev->ResetBase) &= ~(1 << HalDev->ResetBit);
+   resetWait(HalDev);
+   *(volatile bit32u *)(HalDev->ResetBase) |=  (1 << HalDev->ResetBit);
+   resetWait(HalDev);
+
+  /* After Reset clear the Transmit and Receive DMA Head Descriptor Pointers */
+
+  CPMAC_TX0_HDP(HalDev->dev_base)=0;
+  CPMAC_TX1_HDP(HalDev->dev_base)=0;
+  CPMAC_TX2_HDP(HalDev->dev_base)=0;
+  CPMAC_TX3_HDP(HalDev->dev_base)=0;
+  CPMAC_TX4_HDP(HalDev->dev_base)=0;
+  CPMAC_TX5_HDP(HalDev->dev_base)=0;
+  CPMAC_TX6_HDP(HalDev->dev_base)=0;
+  CPMAC_TX7_HDP(HalDev->dev_base)=0;
+
+  /* Rx Init  */
+
+  CPMAC_RX0_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX1_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX2_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX3_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX4_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX5_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX6_HDP(HalDev->dev_base) = 0;
+  CPMAC_RX7_HDP(HalDev->dev_base) = 0;
+
+  CPMAC_RX_BUFFER_OFFSET(HalDev->dev_base) = 0;
+
+  /* Init Tx and Rx DMA */
+
+  CPMAC_TX_CONTROL(HalDev->dev_base) |= TX_EN;
+  CPMAC_RX_CONTROL(HalDev->dev_base) |= RX_EN;
+
+  CPMAC_MAC_INTMASK_SET(HalDev->dev_base) |=2; /* Enable Adaptercheck Ints */
+  HalDev->OsFunc->Control(HalDev->OsDev, pszMacAddr, hcGet, &MacAddr); /* GSG 11/22 */
+  MacAddressSave(HalDev, MacAddr);
+
+  HalDev->HostErr = 0;      /* Clear Adapter Check indicator */
+  HalDev->State = enOpened; /* Change device state */
+
+  /* Start MDIO Negotiation */
+  AutoNegotiate(HalDev);
+
+  /*  Enable the Os Timer  */
+  Ticks = HalDev->CpuFrequency / 100;  /*  10 milli-secs */       /*MJH~030402*/
+  HalDev->OsFunc->Control(HalDev->OsDev, pszTick, hcSet, &Ticks); /* GSG 11/22 */
+  HalDev->OsFunc->IsrRegister(HalDev->OsDev, halIsr, HalDev->interrupt);
+
+  /* GSG +030523 Malloc space for the Rx fraglist */
+  HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
+
+  /* Any pre-open configuration */
+
+  /* For any channels that have been pre-initialized, set them up now */
+  /* Note : This loop should not use MAX_CHN, it should only
+            loop through Channels Setup, memory should not be reserved
+            until Channel is Setup
+  */
+  for(i=0; i<MAX_CHAN; i++) /* i loops through Channels */
+  for(j=0; j<2; j++)        /* j loops through DIRECTION values, 0 and 1  */
+    {
+     if(HalDev->ChIsSetup[i][j]==TRUE)   /* If the Channel and Direction have been Setup */
+       if(HalDev->ChIsOpen[i][j]==FALSE) /* but not opened, then Apply Values now */
+         {
+          CHANNEL_INFO HalChn;
+          HalChn.Channel   = i;
+          HalChn.Direction = j;
+          rc = ChannelConfigApply(HalDev, &HalChn);
+          if(rc != EC_NO_ERRORS)
+            return(rc);
+         }
+    }  /* End of looping through Channel/Direction */
+
+  ConfigApply(HalDev);  /* Apply Configuration Values to Device */
+  CPMAC_MACCONTROL(HalDev->dev_base) |= MII_EN;  /* MAC_EN */
+  if(DBG(0))
+     dbgPrintf("[halOpen]MacControl:%08X\n", CPMAC_MACCONTROL(HalDev->dev_base));
+  return(EC_NO_ERRORS);
+  }
+
+#define INT_PENDING (MAC_IN_VECTOR_TX_INT_OR | MAC_IN_VECTOR_RX_INT_OR | MAC_IN_VECTOR_HOST_INT)
+static int halShutdown(HAL_DEVICE *HalDev)
+  {
+   int Ch, Queue;                                                  /*GSG+030514*/
+
+   /* Verify proper device state */
+   if (HalDev->State == enOpened)
+     halClose(HalDev, 3); /* GSG ~030429 */
+
+   /* Buffer/descriptor resources may still need to be freed if a Close
+      Mode 1 was performed prior to Shutdown - clean up here */    /*GSG+030514*/
+   for (Ch=0; Ch<MAX_CHAN; Ch++)
+     {
+      if (HalDev->RcbStart[Ch] != 0)
+        FreeRx(HalDev,Ch);
+
+      for(Queue=0; Queue<MAX_QUEUE; Queue++)
+        {
+         if (HalDev->TcbStart[Ch][Queue] != 0)
+           FreeTx(HalDev,Ch,Queue);
+        }
+     }
+
+   /* free the HalFunc */
+   HalDev->OsFunc->Free(HalDev->HalFuncPtr);
+
+   /* free the HAL device */
+   HalDev->OsFunc->Free(HalDev);
+
+   return(EC_NO_ERRORS);
+  }
+int halIsr(HAL_DEVICE *HalDev, int *MorePackets)
+{
+  bit32u IntVec;
+  int Serviced;
+  int PacketsServiced=0;
+  int Channel;
+  int TxMorePackets=0;
+  int RxMorePackets=0;
+
+  /* Verify proper device state - important because a call prior to Open would
+      result in a lockup */
+  if (HalDev->State != enOpened)
+     return(EC_CPMAC|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
+
+  IntVec = CPMAC_MAC_IN_VECTOR(HalDev->dev_base);
+
+#ifdef __CPHAL_DEBUG
+  if (DBG(0))
+    {
+    dbgPrintf("\nhalIsr: inst %d, IntVec 0x%X\n", HalDev->inst, IntVec); osfuncSioFlush();/* GSG 11/22 */
+    }
+#endif
+
+  HalDev->IntVec = IntVec;
+  if (IntVec & MAC_IN_VECTOR_TX_INT_OR)
+   {
+     int TxServiceMax=0;  /* Compiler complains if not initialized */
+      
+     Channel = (IntVec & 0x7);
+     
+     if(HalDev->TxIntDisable)
+       {
+         CPMAC_TX_INTMASK_CLEAR(HalDev->dev_base) = (1<<Channel);  /* Disable Interrupt for Channel */           
+         TxServiceMax = HalDev->ChData[Channel].TxServiceMax;  
+         HalDev->ChData[Channel].TxServiceMax = 10000;             /* Need to service all packets in the Queue */
+       }      
+     
+     PacketsServiced |= TxInt(HalDev, Channel, 0, &TxMorePackets);
+     
+     if(HalDev->TxIntDisable)        
+          HalDev->ChData[Channel].TxServiceMax  = TxServiceMax;         
+    }
+  
+  if (IntVec & MAC_IN_VECTOR_RX_INT_OR)
+    {
+     Channel = (IntVec >> 8) & 0x7;
+     Serviced = RxInt(HalDev, Channel, &RxMorePackets);
+     PacketsServiced |= (Serviced<<16);
+    }
+
+  if (IntVec & MAC_IN_VECTOR_HOST_INT)
+    {
+    /* Adaptercheck */
+    HalDev->HostErr = 1;
+    HalDev->MacStatus = CPMAC_MACSTATUS(HalDev->dev_base);
+    osfuncStateChange();                                          /*MJH+030328*/
+    if(DBG(0))
+      {
+      dbgPrintf("Adaptercheck: %08x for base:%X\n",HalDev->MacStatus, (bit32u)HalDev->dev_base);
+      osfuncSioFlush();
+      }
+    }
+  *MorePackets = (TxMorePackets | RxMorePackets);
+  return (PacketsServiced);
+}
+
+int halPacketProcessEnd(HAL_DEVICE *HalDev)
+{
+  int base             = HalDev->dev_base;
+  CPMAC_MAC_EOI_VECTOR(base) = 0;
+  return(0);
+}
+
+
+
+static int PhyCheck(HAL_DEVICE *HalDev)
+  {
+      return(cpMacMdioTic(HalDev->PhyDev));
+  }
+static int halTick(HAL_DEVICE *HalDev)
+{
+    int TickChange;
+
+    if(HalDev->State <  enOpened)
+      return (EC_CPMAC|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
+
+    /* if NO Phy no need to check Link */
+    if(HalDev->MdioConnect & _CPMDIO_NOPHY)
+      return(EC_NO_ERRORS);  /* No change in Phy State detected */
+
+    TickChange = PhyCheck(HalDev);
+    /* Phy State Change Detected */
+    if(TickChange == 1)
+    {
+        /*  MDIO indicated a change  */
+        DuplexUpdate(HalDev);
+        osfuncStateChange();
+        return(EC_NO_ERRORS);
+    }
+
+    /* if in AutoMdix mode, and Flip request received, inform OS */
+    if( (HalDev->MdioConnect & _CPMDIO_AUTOMDIX)  &&
+        (TickChange & _MIIMDIO_MDIXFLIP))
+    {
+       bit32u Mdix;
+       Mdix = TickChange & 0x1;   /*  Mdix mode stored in bit 0 */
+       HalDev->OsFunc->Control(HalDev->OsDev, hcMdioMdixSwitch, hcSet, &Mdix);
+       return(EC_NO_ERRORS);
+    }
+
+    return(EC_NO_ERRORS);
+}
+
+int halCpmacInitModule(HAL_DEVICE **pHalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS **pHalFunc,
+                       OS_FUNCTIONS *OsFunc, int OsFuncSize,     int *HalFuncSize, int Inst)
+  {
+    HAL_DEVICE *HalDev;
+    HAL_FUNCTIONS *HalFunc;
+
+    if (OsFuncSize < sizeof(OS_FUNCTIONS))
+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
+
+    HalDev = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
+    if (!HalDev)
+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
+
+    /* clear the HalDev area */
+    OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
+
+    /* Initialize the size of hal functions */
+    *HalFuncSize = sizeof (HAL_FUNCTIONS);
+
+    HalFunc = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
+    if (!HalFunc)
+      return (EC_CPMAC|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
+
+    /* clear the function pointers */
+    OsFunc->Memset(HalFunc, 0, sizeof(HAL_FUNCTIONS));
+
+    HalDev->OsDev   = OsDev;
+    HalDev->OsOpen  = OsDev;
+    HalDev->inst    = Inst;
+    HalDev->OsFunc  = OsFunc;
+    HalDev->HalFunc = HalFunc;
+    /* Remove the following from cppi, replace with HalFunc */
+    HalDev->HalFuncPtr = HalFunc; /* GSG 11/20 changed name to match cppi */
+
+    /****************************************************************/
+    /*                 POPULATE HALFUNC                             */
+    /****************************************************************/
+    HalFunc->ChannelSetup     = halChannelSetup;
+    HalFunc->ChannelTeardown  = halChannelTeardown; /* GSG 11/20 */
+    HalFunc->Close            = halClose; /* GSG 11/20 */
+    HalFunc->Control          = halControl; /* GSG 11/22 */
+    HalFunc->Init             = halInit;
+    HalFunc->Open             = halOpen;
+    HalFunc->PacketProcessEnd = halPacketProcessEnd;
+    HalFunc->Probe            = halProbe;
+    HalFunc->RxReturn         = halRxReturn;
+    HalFunc->Send             = halSend;
+    HalFunc->Shutdown         = halShutdown;
+    HalFunc->Tick             = halTick;
+
+    /* HalFunc->Status        = halStatus;*/ /* GSG 11/22 */
+    /* pass the HalDev and HalFunc back to the caller */
+
+    *pHalDev  = HalDev;
+    *pHalFunc = HalFunc;
+
+    HalDev->State = enConnected;   /* Initialize the hardware state */
+
+    if (HalDev->debug) HalDev->OsFunc->Printf("halCpmacInitModule: Leave\n");
+    return(0);
+  }
+
+int cpmacRandomRange(HAL_DEVICE *HalDev, int min, int max)
+{
+    int iTmp;
+    iTmp  = cpmacRandom(HalDev);
+    iTmp %= ((max-min)+1);
+    iTmp += min;
+    return(iTmp);
+}
+
+int cpmacRandom(HAL_DEVICE *HalDev)
+{
+    int iTmp;
+    iTmp = CPMAC_BOFFTEST(HalDev->dev_base);
+    iTmp >>= 16;      /*  get rndnum field */
+    iTmp &= (0x3FF); /* field is 10 bits wide */
+    return(iTmp);
+}
diff -urN linux.old/drivers/net/avalanche_cpmac/hcpmac.h linux.dev/drivers/net/avalanche_cpmac/hcpmac.h
--- linux.old/drivers/net/avalanche_cpmac/hcpmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/hcpmac.h	2005-07-12 02:48:42.175574000 +0200
@@ -0,0 +1,383 @@
+/** @file***********************************************************************
+ *  TNETDxxxx Software Support
+ *  Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
+ *
+ *  FILE:
+ *
+ *  DESCRIPTION:
+ *      This file contains definitions for the HAL EMAC API
+ *
+ *  HISTORY:
+ *  xxXxx01 Denis      1.00  Original Version created.
+ *  22Jan02 Denis/Mick 1.01  Modified for HAL EMAC API
+ *  24Jan02 Denis/Mick 1.02  Speed Improvements
+ *  28Jan02 Denis/Mick 1.16  Made function calls pointers
+ *  28Jan02 Mick       1.18  Split into separate modules
+ *  @author Michael Hanrahan
+ *  @version 1.02
+ *  @date    24-Jan-2002
+ *****************************************************************************/
+#ifndef _INC_HCPMAC
+#define _INC_HCPMAC
+
+/** \namespace CPMAC_Version
+This documents version 01.07.04 of the CPMAC CPHAL.
+*/
+const char *pszVersion_CPMAC="CPMAC 01.07.08 "__DATE__" "__TIME__;
+
+/* CHECK THESE LOCATIONS */
+#define TEARDOWN_VAL       0xfffffffc
+#define CB_OFFSET_MASK     0xFFFF0000
+
+
+#define MAX_CHAN 8
+#define MAX_QUEUE 1
+
+typedef struct
+  {
+  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor  */
+  bit32 BufPtr;     /*< Pointer to the data buffer                    */
+  bit32 Off_BLen;   /*< Contains buffer offset and buffer length      */
+  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
+  void *Next;
+  void *OsInfo;
+  void *Eop;
+#ifdef __CPHAL_DEBUG
+  bit32 DbgSop;
+  bit32 DbgData;
+  bit32 DbgFraglist;
+#endif
+  }HAL_TCB;
+
+typedef volatile struct hal_private
+  {
+  bit32 HNext;      /*< Hardware's pointer to next buffer descriptor     */
+  bit32 BufPtr;     /*< Pointer to the data buffer                       */
+  bit32 Off_BLen;   /*< Contains buffer offset and buffer length         */
+  bit32 mode;       /*< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
+  void *DatPtr;
+  void *Next;
+  void *OsInfo;
+  void *Eop;
+  }HAL_RCB;
+
+#define MAX_NEEDS 512                                             /*MJH+030409*/
+/*  HAL  */
+
+typedef struct hal_device
+  {
+  OS_DEVICE *OsDev;
+  OS_FUNCTIONS *OsFunc;
+    /*OS_SETUP *OsSetup;*/                                     /* -GSG 030508 */
+  int inst;
+  bit32u rxbufseq;
+
+
+  bit32 dev_base;
+  bit32  offset;
+
+  bit32u ResetBase; /* GSG 10/20 */
+  int ResetBit;
+  void *OsOpen;
+  bit32u IntVec;
+  PHY_DEVICE *PhyDev;
+  bit32u EmacDuplex;
+  bit32u EmacSpeed;
+  bit32u PhyNum;
+  bit32u MLinkMask;
+  bit32u PhyMask;
+  bit32u MdixMask;
+
+  bit32u Linked;
+  DEVICE_STATE State;
+  unsigned char *MacAddr;
+  HAL_FUNCTIONS *HalFuncPtr; /* GSG 11/20 changed name to match cppi */
+  HAL_FUNCTIONS *HalFunc;
+/*  unsigned int CpuFreq;*/                                       /*MJH-030402*/
+  unsigned int MdioConnect;
+  unsigned int HostErr;
+
+/************************************************************************/
+/*                                                                      */
+/*      R E G I S T E R S                                               */
+/*                                                                      */
+/************************************************************************/
+
+  bit32u RxMbpEnable;
+  bit32u RxUnicastSet;
+  bit32u RxUnicastClear;
+  bit32u RxMaxLen;
+  bit32u RxFilterLowThresh;
+  bit32u Rx0FlowThresh;
+  bit32u MacControl;
+  bit32u MacStatus;
+  bit32u MacHash1;
+  bit32u MacHash2;
+
+/************************************************************************/
+/*                                                                      */
+/*      O P T I O N S                                                   */
+/*                                                                      */
+/************************************************************************/
+
+  char *DeviceInfo;
+  bit32u interrupt;
+
+
+  bit32u RxPassCrc;
+  bit32u RxCaf;
+  bit32u RxCef;
+  bit32u RxBcast;
+  bit32u RxBcastCh;
+  HAL_RCB *RcbPool[MAX_CHAN];
+  bit32 RxActQueueCount[MAX_CHAN];
+  HAL_RCB *RxActQueueHead[MAX_CHAN];
+  HAL_RCB *RxActQueueTail[MAX_CHAN];
+  bit32 RxActive[MAX_CHAN];
+  HAL_TCB *TcbPool[MAX_CHAN][MAX_QUEUE];
+  bit32 TxActQueueCount[MAX_CHAN][MAX_QUEUE];
+  HAL_TCB *TxActQueueHead[MAX_CHAN][MAX_QUEUE];
+  HAL_TCB *TxActQueueTail[MAX_CHAN][MAX_QUEUE];
+  bit32 TxActive[MAX_CHAN][MAX_QUEUE];
+  bit32 TxTeardownPending[MAX_CHAN];
+  bit32 RxTeardownPending[MAX_CHAN];
+  bit32 ChIsOpen[MAX_CHAN][2];
+  bit32 ChIsSetup[MAX_CHAN][2];
+  FRAGLIST *fraglist;
+  char *TcbStart[MAX_CHAN][MAX_QUEUE];
+  char *RcbStart[MAX_CHAN];
+  bit32 RcbSize[MAX_CHAN];
+/*  STAT_INFO Stats;  */
+  bit32  Inst;
+  bit32u BuffersServicedMax;
+  CHANNEL_INFO ChData[MAX_CHAN];
+  bit32u MdioClockFrequency;                                      /*MJH+030402*/
+  bit32u MdioBusFrequency;                                        /*MJH+030402*/
+  bit32u CpuFrequency;                                            /*MJH+030402*/
+  bit32u CpmacFrequency;                                          /*MJH+030403*/
+  bit32u CpmacSize;                                               /*MJH+030425*/
+  int debug;
+  bit32u NeedsCount;                                              /*MJH+030409*/
+  HAL_RECEIVEINFO *Needs[MAX_NEEDS];                              /*MJH+030409*/
+  int MaxFrags;
+  int TxIntThreshold[MAX_CHAN];                   /* MJH 040621  NSP Performance Update */
+  int TxIntThresholdMaster[MAX_CHAN];             /* MJH 040827  NSP Performance Update */
+  int TxIntDisable;                     /* MJH 040621  NSP Performance Update */  
+  }HALDEVICE;
+
+#define STATS_MAX 36
+
+#define MACCONTROL_MASK    (TX_PTYPE|TX_PACE|TX_FLOW_EN|RX_FLOW_EN|CTRL_LOOPBACK)
+#define RX_MBP_ENABLE_MASK                                       \
+        (RX_PASS_CRC|RX_QOS_EN|RX_NO_CHAIN|                      \
+         RX_CMF_EN|RX_CSF_EN|RX_CEF_EN|RX_CAF_EN|RX_PROM_CH_MASK|     \
+         RX_BROAD_EN|RX_BROAD_CH_MASK|RX_MULT_EN|RX_MULT_CH_MASK)
+
+
+#define MBP_UPDATE(Mask, On)                      \
+         if(On)   HalDev->RxMbpEnable |=  Mask;   \
+         else     HalDev->RxMbpEnable &= ~Mask
+
+#define CONTROL_UPDATE(Mask, On)                  \
+         if(On)   HalDev->MacControl |=  Mask;    \
+         else     HalDev->MacControl &= ~Mask
+
+
+#define UPDATE_TX_PTYPE(Value)       CONTROL_UPDATE(TX_PTYPE,Value)
+#define UPDATE_TX_PACE(Value)        CONTROL_UPDATE(TX_PACE,Value)
+#define UPDATE_MII_EN(Value)         CONTROL_UPDATE(MII_EN,Value)
+#define UPDATE_TX_FLOW_EN(Value)     CONTROL_UPDATE(TX_FLOW_EN,Value)
+#define UPDATE_RX_FLOW_EN(Value)     CONTROL_UPDATE(RX_FLOW_EN,Value)
+#define UPDATE_CTRL_LOOPBACK(Value)  CONTROL_UPDATE(CTRL_LOOPBACK,Value)
+#define UPDATE_FULLDUPLEX(Value)     CONTROL_UPDATE(FULLDUPLEX,(Value))
+
+#define UPDATE_RX_PASS_CRC(Value)    MBP_UPDATE(RX_PASS_CRC,  Value)
+#define UPDATE_RX_QOS_EN(Value)      MBP_UPDATE(RX_QOS_EN,    Value)
+#define UPDATE_RX_NO_CHAIN(Value)    MBP_UPDATE(RX_NO_CHAIN,  Value)
+#define UPDATE_RX_CMF_EN(Value)      MBP_UPDATE(RX_CMF_EN,    Value)
+#define UPDATE_RX_CSF_EN(Value)      MBP_UPDATE(RX_CSF_EN,    Value)
+#define UPDATE_RX_CEF_EN(Value)      MBP_UPDATE(RX_CEF_EN,    Value)
+#define UPDATE_RX_CAF_EN(Value)      MBP_UPDATE(RX_CAF_EN,    Value)
+#define UPDATE_RX_BROAD_EN(Value)    MBP_UPDATE(RX_BROAD_EN,  Value)
+#define UPDATE_RX_MULT_EN(Value)     MBP_UPDATE(RX_MULT_EN,   Value)
+
+#define UPDATE_RX_PROM_CH(Value)                         \
+        HalDev->RxMbpEnable &=  ~RX_PROM_CH_MASK;        \
+        HalDev->RxMbpEnable |=   RX_PROM_CH(Value)
+
+#define UPDATE_RX_BROAD_CH(Value)                        \
+           HalDev->RxMbpEnable &=  ~RX_BROAD_CH_MASK;    \
+           HalDev->RxMbpEnable |=   RX_BROAD_CH(Value)
+
+#define UPDATE_RX_MULT_CH(Value)                         \
+           HalDev->RxMbpEnable &=  ~RX_MULT_CH_MASK;     \
+           HalDev->RxMbpEnable |=   RX_MULT_CH(Value)
+
+
+
+typedef enum
+  {
+   /*  CPMAC */
+    enCpmacStart=0,
+    enStats0,
+    enStats1,
+    enStats2,
+    enStats3,
+    enStats4,
+    enStatsDump,
+    enStatsClear,
+    enRX_PASS_CRC,
+    enRX_QOS_EN,
+    enRX_NO_CHAIN,
+    enRX_CMF_EN,
+    enRX_CSF_EN,
+    enRX_CEF_EN,
+    enRX_CAF_EN,
+    enRX_PROM_CH,
+    enRX_BROAD_EN,
+    enRX_BROAD_CH,
+    enRX_MULT_EN,
+    enRX_MULT_CH,
+
+    enTX_PTYPE,
+    enTX_PACE,
+    enMII_EN,
+    enTX_FLOW_EN,
+    enRX_FLOW_EN,
+    enCTRL_LOOPBACK,
+
+    enRX_MAXLEN,
+    enRX_FILTERLOWTHRESH,
+    enRX0_FLOWTHRESH,
+    enRX_UNICAST_SET,
+    enRX_UNICAST_CLEAR,
+    enMdioConnect,
+    enMAC_ADDR_GET,
+    enTick,
+    enRX_MULTICAST,
+    enRX_MULTI_ALL,
+    enRX_MULTI_SINGLE,
+    enVersion,
+    enCpmacEnd                                   /* Last entry */
+  }INFO_KEY_CPMAC;
+
+static const char pszVersion[]                 = "Version";
+static const char pszStats0[]                  = "Stats0";
+static const char pszStats1[]                  = "Stats1";
+static const char pszStats2[]                  = "Stats2";
+static const char pszStats3[]                  = "Stats3";
+static const char pszStats4[]                  = "Stats4";
+static const char pszStatsDump[]               = "StatsDump";
+static const char pszStatsClear[]              = "StatsClear";
+
+/********************************************************************
+**
+**  RX MBP ENABLE
+**
+********************************************************************/
+static const char pszRX_PASS_CRC[]             = "RX_PASS_CRC";
+static const char pszRX_QOS_EN[]               = "RX_QOS_EN";
+static const char pszRX_NO_CHAIN[]             = "RX_NO_CHAIN";
+static const char pszRX_CMF_EN[]               = "RX_CMF_EN";
+static const char pszRX_CSF_EN[]               = "RX_CSF_EN";
+static const char pszRX_CEF_EN[]               = "RX_CEF_EN";
+static const char pszRX_CAF_EN[]               = "RX_CAF_EN";
+static const char pszRX_PROM_CH[]              = "RX_PROM_CH";
+static const char pszRX_BROAD_EN[]             = "RX_BROAD_EN";
+static const char pszRX_BROAD_CH[]             = "RX_BROAD_CH";
+static const char pszRX_MULT_EN[]              = "RX_MULT_EN";
+static const char pszRX_MULT_CH[]              = "RX_MULT_CH";
+
+
+/********************************************************************
+**
+**  MAC CONTROL
+**
+********************************************************************/
+static const char pszTX_PTYPE[]                = "TX_PTYPE";
+static const char pszTX_PACE[]                 = "TX_PACE";
+static const char pszMII_EN[]                  = "MII_EN";
+static const char pszTX_FLOW_EN[]              = "TX_FLOW_EN";
+static const char pszRX_FLOW_EN[]              = "RX_FLOW_EN";
+static const char pszCTRL_LOOPBACK[]           = "CTRL_LOOPBACK";
+
+static const char pszRX_MAXLEN[]               = "RX_MAXLEN";
+static const char pszRX_FILTERLOWTHRESH[]      = "RX_FILTERLOWTHRESH";
+static const char pszRX0_FLOWTHRESH[]          = "RX0_FLOWTHRESH";
+static const char pszRX_UNICAST_SET[]          = "RX_UNICAST_SET";
+static const char pszRX_UNICAST_CLEAR[]        = "RX_UNICAST_CLEAR";
+static const char pszMdioConnect[]             = "MdioConnect";
+static const char pszMacAddr[]                 = "MacAddr";
+static const char pszTick[]                    = "Tick";
+
+/********************************************************************
+**
+**  MULTICAST
+**
+********************************************************************/
+
+static const char pszRX_MULTICAST[]            = "RX_MULTICAST";
+static const char pszRX_MULTI_ALL[]            = "RX_MULTI_ALL";
+static const char pszRX_MULTI_SINGLE[]         = "RX_MULTI_SINGLE";
+
+/*
+static const char* pszGFHN = "GFHN";
+*/
+
+static const CONTROL_KEY KeyCpmac[] =
+   {
+     {""                           , enCpmacStart},
+     {pszStats0                    , enStats0},
+     {pszStats1                    , enStats1},
+     {pszStats2                    , enStats2},
+     {pszStats3                    , enStats3},
+     {pszStats4                    , enStats4},
+     {pszStatsClear                , enStatsClear},
+     {pszStatsDump                 , enStatsDump},
+     {pszRX_PASS_CRC               , enRX_PASS_CRC},
+     {pszRX_QOS_EN                 , enRX_QOS_EN},
+     {pszRX_NO_CHAIN               , enRX_NO_CHAIN},
+     {pszRX_CMF_EN                 , enRX_CMF_EN},
+     {pszRX_CSF_EN                 , enRX_CSF_EN},
+     {pszRX_CEF_EN                 , enRX_CEF_EN},
+     {pszRX_CAF_EN                 , enRX_CAF_EN},
+     {pszRX_PROM_CH                , enRX_PROM_CH},
+     {pszRX_BROAD_EN               , enRX_BROAD_EN},
+     {pszRX_BROAD_CH               , enRX_BROAD_CH},
+     {pszRX_MULT_EN                , enRX_MULT_EN},
+     {pszRX_MULT_CH                , enRX_MULT_CH},
+
+     {pszTX_PTYPE                  , enTX_PTYPE},
+     {pszTX_PACE                   , enTX_PACE},
+     {pszMII_EN                    , enMII_EN},
+     {pszTX_FLOW_EN                , enTX_FLOW_EN},
+     {pszRX_FLOW_EN                , enRX_FLOW_EN},
+     {pszCTRL_LOOPBACK             , enCTRL_LOOPBACK},
+     {pszRX_MAXLEN                 , enRX_MAXLEN},
+     {pszRX_FILTERLOWTHRESH        , enRX_FILTERLOWTHRESH},
+     {pszRX0_FLOWTHRESH            , enRX0_FLOWTHRESH},
+     {pszRX_UNICAST_SET            , enRX_UNICAST_SET},
+     {pszRX_UNICAST_CLEAR          , enRX_UNICAST_CLEAR},
+     {pszMdioConnect               , enMdioConnect},
+     {pszRX_MULTICAST              , enRX_MULTICAST},
+     {pszRX_MULTI_ALL              , enRX_MULTI_ALL},
+     {pszRX_MULTI_SINGLE           , enRX_MULTI_SINGLE},
+     {pszTick                      , enTick},
+     {pszVersion                   , enVersion},
+     {""                           , enCpmacEnd}
+   };
+
+const char hcCpuFrequency[]       = "CpuFreq";
+const char hcCpmacFrequency[]     = "CpmacFrequency";
+const char hcMdioBusFrequency[]   = "MdioBusFrequency";
+const char hcMdioClockFrequency[] = "MdioClockFrequency";
+const char hcCpmacBase[]          = "CpmacBase";
+const char hcPhyNum[]             = "PhyNum";
+const char hcSize[]               = "size";
+const char hcCpmacSize[]          = "CpmacSize";
+const char hcPhyAccess[]          = "PhyAccess";
+const char hcLinked[]             = "Linked";
+const char hcFullDuplex[]         = "FullDuplex";
+const char hcMdixMask[]           = "MdixMask";
+const char hcMdioMdixSwitch[]     = "MdixSet";
+#endif
diff -urN linux.old/drivers/net/avalanche_cpmac/Makefile linux.dev/drivers/net/avalanche_cpmac/Makefile
--- linux.old/drivers/net/avalanche_cpmac/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/Makefile	2005-07-12 02:48:42.175574000 +0200
@@ -0,0 +1,26 @@
+# File: drivers/net/avalanche_cpmac/Makefile
+#
+# Makefile for the Linux network (CPMAC) device drivers.
+#
+
+O_TARGET := avalanche_cpmac.o
+
+
+list-multi := avalanche_cpmac.o
+obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) := avalanche_cpmac.o
+
+avalanche_cpmac-objs += cpmac.o            cpmacHalLx.o       hcpmac.o \
+                        	      psp_config_build.o psp_config_mgr.o            \
+				      psp_config_parse.o psp_config_util.o
+
+
+include $(TOPDIR)/Rules.make
+
+
+avalanche_cpmac.o:        $(avalanche_cpmac-objs)
+	$(LD) -r -o $@ $(avalanche_cpmac-objs)
+
+
+
+clean:
+	rm -f core *.o *.a *.s
diff -urN linux.old/drivers/net/avalanche_cpmac/mdio_reg.h linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h
--- linux.old/drivers/net/avalanche_cpmac/mdio_reg.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/mdio_reg.h	2005-07-12 02:48:42.176573000 +0200
@@ -0,0 +1,121 @@
+/****************************************************************************
+**      TNETD53xx Software Support
+**      Copyright(c) 2002, Texas Instruments Incorporated. All Rights Reserved.
+**
+**      FILE: mdio_reg.h   Register definitions for the VBUS MII module
+**
+**      DESCRIPTION:
+**              This include file contains register definitions for the
+**              VBUS MII module.
+**
+**      HISTORY:
+**              27Mar02 Michael Hanrahan Original (modified from emacmdio.h)
+**              01Apr02 Michael Hanrahan Modified to include all regs. in spec
+**              03Apr02 Michael Hanrahan Updated to Version 0.6 of spec
+**              05Apr02 Michael Hanrahan Moved Phy Mode values into here
+**              30Apr02 Michael Hanrahan Updated to Version 0.8 of spec
+**              30Apr02 Michael Hanrahan Updated to recommended format
+**              10May02 Michael Hanrahan Updated to Version 0.9 of spec
+*****************************************************************************/
+#ifndef _INC_MDIO_REG
+#define _INC_MDIO_REG
+
+/***************************************************************************
+**                                                                         
+**         M D I O  M E M O R Y  M A P 
+**                                                                         
+***************************************************************************/
+
+
+#define pMDIO_VER(base)                 ((volatile bit32u *)(base+0x00))
+#define pMDIO_CONTROL(base)             ((volatile bit32u *)(base+0x04))
+#define pMDIO_ALIVE(base)               ((volatile bit32u *)(base+0x08))
+#define pMDIO_LINK(base)                ((volatile bit32u *)(base+0x0C))
+#define pMDIO_LINKINTRAW(base)          ((volatile bit32u *)(base+0x10))
+#define pMDIO_LINKINTMASKED(base)       ((volatile bit32u *)(base+0x14))
+#define pMDIO_USERINTRAW(base)          ((volatile bit32u *)(base+0x20))
+#define pMDIO_USERINTMASKED(base)       ((volatile bit32u *)(base+0x24))
+#define pMDIO_USERINTMASKED_SET(base)   ((volatile bit32u *)(base+0x28))
+#define pMDIO_USERINTMASKED_CLR(base)   ((volatile bit32u *)(base+0x2C))
+#define pMDIO_USERACCESS(base, channel) ((volatile bit32u *)(base+(0x80+(channel*8))))
+#define pMDIO_USERPHYSEL(base, channel) ((volatile bit32u *)(base+(0x84+(channel*8))))
+
+
+/***************************************************************************
+**                                                                         
+**         M D I O  R E G I S T E R  A C C E S S  M A C R O S 
+**                                                                         
+***************************************************************************/
+
+
+#define MDIO_ALIVE(base)                    (*(pMDIO_ALIVE(base)))
+#define MDIO_CONTROL(base)                  (*(pMDIO_CONTROL(base)))
+#define         MDIO_CONTROL_IDLE                 (1 << 31)
+#define         MDIO_CONTROL_ENABLE               (1 << 30)
+#define         MDIO_CONTROL_PREAMBLE             (1 << 20)  
+#define         MDIO_CONTROL_FAULT                (1 << 19)
+#define         MDIO_CONTROL_FAULT_DETECT_ENABLE  (1 << 18)
+#define         MDIO_CONTROL_INT_TEST_ENABLE      (1 << 17)
+#define         MDIO_CONTROL_HIGHEST_USER_CHANNEL (0x1F << 8)
+#define         MDIO_CONTROL_CLKDIV               (0xFF)
+#define MDIO_LINK(base)                     (*(pMDIO_LINK(base)))
+#define MDIO_LINKINTRAW(base)               (*(pMDIO_LINKINTRAW(base)))
+#define MDIO_LINKINTMASKED(base)            (*(pMDIO_LINKINTMASKED(base)))
+#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
+#define MDIO_USERINTMASKED(base)            (*(pMDIO_USERINTMASKED(base)))
+#define MDIO_USERINTMASKED_CLR(base)        (*(pMDIO_USERINTMASKED_CLR(base)))
+#define MDIO_USERINTMASKED_SET(base)        (*(pMDIO_USERINTMASKED_SET(base)))
+#define MDIO_USERINTRAW(base)               (*(pMDIO_USERINTRAW(base)))
+#define MDIO_USERACCESS(base, channel)      (*(pMDIO_USERACCESS(base, channel)))
+#define         MDIO_USERACCESS_GO     (1 << 31)
+#define         MDIO_USERACCESS_WRITE  (1 << 30)
+#define         MDIO_USERACCESS_READ   (0 << 30)
+#define         MDIO_USERACCESS_ACK    (1 << 29)
+#define         MDIO_USERACCESS_REGADR (0x1F << 21)
+#define         MDIO_USERACCESS_PHYADR (0x1F << 16)
+#define         MDIO_USERACCESS_DATA   (0xFFFF)
+#define MDIO_USERPHYSEL(base, channel)      (*(pMDIO_USERPHYSEL(base, channel)))
+#define         MDIO_USERPHYSEL_LINKSEL         (1 << 7)
+#define         MDIO_USERPHYSEL_LINKINT_ENABLE  (1 << 6)
+#define         MDIO_USERPHYSEL_PHYADR_MON      (0x1F)
+#define MDIO_VER(base)                      (*(pMDIO_VER(base)))
+#define         MDIO_VER_MODID         (0xFFFF << 16)
+#define         MDIO_VER_REVMAJ        (0xFF   << 8)
+#define         MDIO_VER_REVMIN        (0xFF)
+
+
+
+
+/****************************************************************************/
+/*                                                                          */
+/*         P H Y   R E G I S T E R  D E F I N I T I O N S                   */
+/*                                                                          */
+/****************************************************************************/
+
+
+#define PHY_CONTROL_REG       0
+  #define PHY_RESET           (1<<15)
+  #define PHY_LOOP            (1<<14)
+  #define PHY_100             (1<<13)
+  #define AUTO_NEGOTIATE_EN   (1<<12)
+  #define PHY_PDOWN           (1<<11)
+  #define PHY_ISOLATE         (1<<10)
+  #define RENEGOTIATE         (1<<9)
+  #define PHY_FD              (1<<8)
+
+#define PHY_STATUS_REG        1
+  #define NWAY_COMPLETE       (1<<5)
+  #define NWAY_CAPABLE        (1<<3)
+  #define PHY_LINKED          (1<<2)
+
+#define NWAY_ADVERTIZE_REG    4
+#define NWAY_REMADVERTISE_REG 5
+  #define NWAY_FD100          (1<<8)
+  #define NWAY_HD100          (1<<7)
+  #define NWAY_FD10           (1<<6)
+  #define NWAY_HD10           (1<<5)
+  #define NWAY_SEL            (1<<0)
+  #define NWAY_AUTO           (1<<0)
+
+
+#endif _INC_MDIO_REG
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.c linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c
--- linux.old/drivers/net/avalanche_cpmac/psp_config_build.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.c	2005-07-12 02:48:42.176573000 +0200
@@ -0,0 +1,335 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Configuration Build Source
+ ******************************************************************************
+ * FILE NAME:       psp_config_build.c
+ *
+ * DESCRIPTION:     Configuration Build API Implementation
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+#ifdef INCLUDE_FFS
+#include "ffs.h"
+#endif /* INCLUDE_FFS */
+
+#include "psp_config_mgr.h"
+#include "psp_config_build.h"
+#include "psp_config_util.h"
+
+#define MAX_DEVICE_NAME_LEN     16
+#define MAX_DEVICE_STR_LEN      512
+
+#ifndef NULL
+#define NULL (char *)0
+#endif
+
+#include <asm/ar7/sangam.h>
+#include <linux/slab.h>
+#include <linux/config.h>
+
+
+#define os_malloc(size) kmalloc(size, GFP_KERNEL)
+
+int psp_run_enumerator(void)
+{
+    return(0);
+}
+
+#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
+
+static int auto_detect_cpmac_phy(void)
+{
+
+#define SELECT_INT_PHY_MAC 0
+#define SELECT_EXT_PHY_MAC 1
+
+    volatile unsigned long *reset_cntl = AVALANCHE_RESET_CONTROL_BASE, *mdio_cntl  = ((int)AVALANCHE_MDIO_BASE + 0x4);
+    unsigned int j= 0, detected_phy_map = 0, auto_select = SELECT_INT_PHY_MAC;
+                                                                                                                   
+    *reset_cntl |= (1 << AVALANCHE_MDIO_RESET_BIT) | (1 << AVALANCHE_LOW_CPMAC_RESET_BIT) | (1 << AVALANCHE_HIGH_CPMAC_RESET_BIT) | (1 << AVALANCHE_LOW_EPHY_RESET_BIT);                                 
+    *mdio_cntl   = (1 << 30) | ((CONFIG_AR7_SYS * 1000)/2200);                                              
+                                                                                                                   
+    for(j=0;j < 300000; j++) 
+    { 
+        if(j%100000) continue;
+
+        detected_phy_map = *(mdio_cntl + 1);
+        if(detected_phy_map) 
+        {
+            detected_phy_map &= ~AVALANCHE_LOW_CPMAC_PHY_MASK;
+                
+            if(detected_phy_map && !(detected_phy_map & (detected_phy_map - 1)))
+            {
+                auto_select = SELECT_EXT_PHY_MAC;
+                break;
+            }
+        } 
+    }
+
+    return(auto_select);
+
+}
+
+#endif
+
+
+#ifndef AVALANCHE_LOW_CPMAC_MDIX_MASK
+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
+#endif
+
+void psp_load_default_static_cfg(void)
+{
+    char s2[100],  s3[100];
+    char s4[2000], s6[2000];
+    int threshold = 20;
+    char *tx_threshold_ptr = prom_getenv("threshold");
+    
+    if(tx_threshold_ptr)
+      threshold = simple_strtol(tx_threshold_ptr, (char **)NULL, 10);
+
+    /* Static configuration if options.conf not present */
+    sprintf(s3,"cpmdio(id=mii, base=%u, reset_bit=%d)", AVALANCHE_MDIO_BASE, 22);
+    sprintf(s2, "reset( id=[ResetRegister], base=%u)", AVALANCHE_RESET_CONTROL_BASE);
+
+    sprintf(s4, "cpmac(id=[cpmac], unit=0, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MdixMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_LOW_CPMAC_BASE, AVALANCHE_LOW_CPMAC_RESET_BIT, AVALANCHE_LOW_CPMAC_PHY_MASK, AVALANCHE_LOW_CPMAC_MDIX_MASK, AVALANCHE_LOW_CPMAC_INT,threshold,threshold,threshold);
+
+    sprintf(s6, "cpmac(id=[cpmac], unit=1, base=%u, size=0x800, reset_bit=%d, PhyMask=%u, MLink=0, int_line=%d, memory_offset=0, RX_CAF=1, RX_PASSCRC=0, RX_CEF=1, RX_BCAST=0, RX_BCASTCH=0, Ch0=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch1=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128], Ch2=[TxNumBuffers=256, TxNumQueues=1, TxServiceMax=%d, RxNumBuffers=256, RxBufferOffset=0, RxBufSize=1000, RxServiceMax=128])", AVALANCHE_HIGH_CPMAC_BASE, AVALANCHE_HIGH_CPMAC_RESET_BIT, AVALANCHE_HIGH_CPMAC_PHY_MASK, AVALANCHE_HIGH_CPMAC_INT,threshold,threshold,threshold);
+
+    psp_config_add("reset", s2, psp_config_strlen(s2), en_compile);
+
+
+#if defined (CONFIG_AVALANCHE_LOW_CPMAC)
+
+    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
+    psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
+
+#endif
+
+
+#if defined (CONFIG_AVALANCHE_HIGH_CPMAC)
+
+    psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
+    psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
+
+#endif
+
+#if defined (CONFIG_AVALANCHE_CPMAC_AUTO)
+    { 
+        char *phy_sel_ptr = prom_getenv("mac_phy_sel"); 
+        int   phy_sel = SELECT_EXT_PHY_MAC;
+        char *mac_port = prom_getenv("MAC_PORT"); /* Internal: 0, External: 1 */
+
+        if(phy_sel_ptr && (0 == strcmp(phy_sel_ptr, "int")))
+        {
+            phy_sel = SELECT_INT_PHY_MAC;
+        }
+
+        //if(phy_sel == auto_detect_cpmac_phy())
+        if(!mac_port || 0 == strcmp(mac_port, "1"))
+        {
+            printk("Using the MAC with external PHY\n");
+            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
+            psp_config_add("cpmac", s6, psp_config_strlen(s6), en_compile);
+        }
+        else
+        {
+            printk("Using the MAC with internal PHY\n");
+            psp_config_add("cpmdio", s3, psp_config_strlen(s3), en_compile);
+            psp_config_add("cpmac", s4, psp_config_strlen(s4), en_compile);
+        }
+    }
+                      
+#endif    
+
+}
+
+char* psp_conf_read_file(char *p_file_name)
+{
+#ifdef INCLUDE_FFS
+    
+    char        *p_file_data = NULL;
+    unsigned int file_size;
+    FFS_FILE    *p_file = NULL;
+
+    if(p_file_name == NULL)
+    {
+        return (NULL);
+    }
+
+    if(!(p_file = ffs_fopen(p_file_name, "r"))) 
+    {
+        return(NULL);
+    }
+
+    file_size = p_file->_AvailableBytes;
+
+    p_file_data = os_malloc(file_size + 1);
+    
+    if(ffs_fread(p_file_data, file_size, 1, p_file) == 0)
+    {
+        kfree(p_file_data);
+        return(NULL);
+    }
+
+    ffs_fclose(p_file);
+   
+    p_file_data[file_size] = '\0';
+
+    return(p_file_data);
+    
+#else /* NO FFS */
+    return(NULL);
+#endif /* INCLUDE_FFS */
+}
+
+int psp_conf_get_line(char *p_in_data, char **next_line)
+{
+    char *p       = p_in_data;
+
+    while(*p && *p++ != '\n')
+    {
+
+    } 
+   
+    *next_line = p;
+
+    return(p - 1 - p_in_data);
+}
+
+
+int psp_conf_is_data_line(char *line)
+{
+    int ret_val = 1;
+
+    if(*line == '\0' || *line == '\n' || *line == '#')
+        ret_val = 0;
+
+    return(ret_val);
+}
+
+int psp_conf_get_key_size(char *data)
+{
+    char *p = data;
+
+    while(*p && *p != '\n' && *p != '(' && *p != ' ')
+        p++;
+
+    return(p - data);
+}
+
+char* psp_conf_eat_white_spaces(char *p)
+{
+    while(*p && *p != '\n' && *p == ' ')
+        p++;
+
+    return (p);
+}
+
+int psp_build_from_opt_conf(void)
+{
+    char *data       = NULL;
+    char *data_hold  = NULL;
+    char *next_line  = NULL; 
+    int  line_size   = 0;
+
+    if((data = psp_conf_read_file("/etc/options.conf")) == NULL)
+        return(-1);
+
+    data_hold = data;
+
+    while((line_size=psp_conf_get_line(data, &next_line)) != -1)
+    {
+
+        char *name = NULL;
+        int  name_size; 
+ 
+    data = psp_conf_eat_white_spaces(data);
+
+        if(psp_conf_is_data_line(data))
+        {
+            data[line_size] = '\0';
+ 
+            name_size = psp_conf_get_key_size(data);
+           
+            if(name_size > 0) 
+            {
+                name = (char *) os_malloc(name_size + 1);
+                if(name == NULL) break;
+
+                psp_config_memcpy(name, data, name_size);
+                name[name_size] = '\0';
+
+                psp_config_add(name, data, line_size, en_opt_conf);
+            
+                kfree(name);
+            }
+
+            data[line_size] = '\n';
+        }
+
+        data = next_line;
+    }
+
+    kfree(data_hold);
+    return (0);
+}
+
+
+int psp_write_conf_file(char *p_write_file, char * dev_cfg_string)
+{
+#ifdef INCLUDE_FFS
+    int bytes_written=0;
+        FFS_FILE *file_ptr=NULL;    
+ 
+    /*
+     * NOTE: In current implementation of FFS in ADAM2 if the file exists beforehand, it
+     * can't be opened for write.
+     */
+        if(!(file_ptr=ffs_fopen(p_write_file, "w"))) {
+        return(-1);
+        }
+    
+    /* Write into the file "output.con" the character string */
+    /* write a \n before a writing a line */
+    if(!(bytes_written = ffs_fwrite("\n", 1, sizeof(char), file_ptr))) {
+        return (-1);
+    }
+    
+    if(!(bytes_written = ffs_fwrite(dev_cfg_string, psp_config_strlen(dev_cfg_string), sizeof(char), file_ptr))) {
+        return (-1);        
+    }
+    ffs_fclose(file_ptr);
+    return (bytes_written+1);
+#else /* NO FFS */
+    return(-1);
+#endif /* INCLUDE_FFS */
+}
+
+void build_psp_config(void)
+{
+
+    /* initialize the repository. */
+    psp_config_init();
+    
+#ifdef INCLUDE_FFS
+    ffs_init();
+#endif /* INCLUDE_FFS */
+
+    /* read the configuration from the options.conf to override default ones */
+    psp_build_from_opt_conf();
+
+    /* read the configuration which were not over ridden in options.conf */
+    psp_load_default_static_cfg();
+
+    /* let the vlynq be enumerated. Enumerator will add cfg info
+       of the discovered device instances to the repository.*/
+    psp_run_enumerator();
+
+    /* dump the repository*/
+    dump_device_cfg_pool();
+
+}
+
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.h linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h
--- linux.old/drivers/net/avalanche_cpmac/psp_config_build.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_build.h	2005-07-12 02:48:42.176573000 +0200
@@ -0,0 +1,138 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Configuration Build Header
+ ******************************************************************************
+ * FILE NAME:       psp_config_build.h
+ *
+ * DESCRIPTION:     Configuration Build API's.
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+#ifndef __PSP_CONF_BUILD_H__
+#define __PSP_CONF_BUILD_H__
+
+/*------------------------------------------------------------------------------
+ * Name: psp_conf_read_file
+ *
+ * Parameters: 
+ *         in: p_file_name - the name of the file to read from.
+ *
+ * Description:
+ *     Reads the entire file in one shot. This function opens  the 
+ *     file, determines the size of the data to be read, allocates 
+ *     the required memory, NULL terminates the data and closes the
+ *     file.
+ *
+ *     It is responsibily of the callee to free the memory after it is
+ *     done with that data.
+ *    
+ *
+ * Returns:
+ *     A NULL pointer, if failed to read the data otherwise, a valid
+ *     pointer referring to the data read from the file.
+ *
+ * Example: 
+ *   
+ *     psp_conf_read_file("/etc/options.conf");
+ *---------------------------------------------------------------------------*/
+ char *psp_conf_read_file(char *p_file_name);
+
+ /*----------------------------------------------------------------------------
+  * Function : psp_conf_write_file
+  *
+  * Parameters:
+  *         in: p_file_name - the file to which data is to be written.
+  *         in: data        - the NULL terminated data string.
+  *
+  * Description:
+  *     Write the indicated data into the file. This function opens the file,
+  *     appends the data to end of the file, closes the file. 
+  *
+  * Returns:
+  *
+  *     The number of bytes on success. 
+  *     0 on failure.
+  *
+  * Example:
+  *
+  *     psp_conf_write_file("/etc/outcon.conf", data);
+  *--------------------------------------------------------------------------*/
+ int   psp_conf_write_file(char *p_file_name, char *data);
+
+ /*----------------------------------------------------------------------------
+  * Function: psp_conf_get_line
+  *
+  * Parameters:
+  *         in: data      - the data from which the line is to identified.
+  *        out: next_line - the pointer to start of the next line. 
+  *
+  * Description:
+  *     Expects the data to be '\n' separated segments and data is NULL 
+  *     terminated. Parses the given data for '\n' or '\0'. Provides a pointer
+  *     to the start of next line in the next_line. 
+  *
+  * Returns:
+  *     -1 on error.
+  *      0 or more to indicate the number of bytes in the line starting at 
+  *      data.
+  *--------------------------------------------------------------------------*/
+ int psp_get_conf_line(char *p_in_data, char **next_line);
+
+ /*----------------------------------------------------------------------------
+  * Function: psp_conf_is_data_line
+  *
+  * Parameters:
+  *         in: line - the array of bytes.
+  *
+  * Description:
+  *     Tests the first byte in the array for '\0' or '\n' or '#'. Lines 
+  *     starting with these characters are not considered data.
+  *
+  * Returns:
+  *     1 if the line has data.
+  *     0 otherwise.
+  *
+  *--------------------------------------------------------------------------*/
+ int psp_conf_is_data_line(char *line);
+
+ /*----------------------------------------------------------------------------
+  * Function: psp_conf_eat_white_spaces
+  *
+  * Parameters:
+  *         in: line - the array of bytes.
+  *
+  * Description:
+  *     Eats white spaces at the begining of the line while looking out for 
+  *     '\0' or '\n' or ' '.
+  * 
+  * Returns:
+  *     Pointer to the begining of the non white space character. 
+  *     NULL if '\0' or '\n' is found.
+  *
+  *--------------------------------------------------------------------------*/
+  char *psp_conf_eat_white_spaces(char *line);
+
+  /*---------------------------------------------------------------------------
+   * Function: psp_conf_get_key_size
+   *
+   * Parameters:
+   *         in: line - the array of bytes.
+   *
+   * Description:
+   *     Identifies the size of the 'key' in array formatted as 
+   *     key(id=[key1]....). This function also checks out for '\0' and '\n'.
+   *
+   * Returns:
+   *     On success, The number of bytes that forms the key. 
+   *     0 otherwise. 
+   *     
+   *-------------------------------------------------------------------------*/
+  int psp_conf_get_key_size(char *line);
+
+
+
+#endif /* __PSP_CONF_BUILD_H__ */
+
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c
--- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.c	2005-07-12 02:48:42.177573000 +0200
@@ -0,0 +1,464 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager Source
+ ******************************************************************************
+ * FILE NAME:       psp_config_mgr.c
+ *
+ * DESCRIPTION:
+ *
+ * Manages configuration information. The repository is managed on the basis of 
+ * <key, info> pair. It is possible to have multiple occurrence of the same key. 
+ * Multiple occurences of the same keys are referred to as 'instances'. 
+ * 'instances' are assigned in the order of configuration arrival. The first 
+ * config for a 'key' added to the repository would be treated as instance 0 and
+ * next config to arrive for the same key would be treated as instance '1' and 
+ * so on.
+ * 
+ * Info is retrieved from the repository based on the 'key' and 'instance' value.
+ *
+ * No assumption is made about the format of the information that is put in the 
+ * repository. The only requirement is that 'key' should be NULL terminated 
+ * string.
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+//#include <stdio.h>
+//#include <stdlib.h>
+#include "psp_config_mgr.h"
+#include "psp_config_util.h"
+
+#include <linux/slab.h>
+
+/*-----------------------------------------------------------
+  Implemented elsewhere
+ -----------------------------------------------------------*/
+extern int sys_read_options_conf(void);
+extern int sys_write_options_conf(char *cfg_info);
+extern int sys_load_default_static_cfg(void);
+extern int sys_run_enumerator(void);
+
+#define os_malloc(size) kmalloc(size, GFP_KERNEL)
+
+/*---------------------------------------------------------
+ * Data structures.
+ *--------------------------------------------------------*/
+struct device_cfg_data;
+
+typedef struct device_instance_cfg_data
+{
+    struct device_instance_cfg_data       *next;
+    char                                  locale[100];
+    unsigned int                          data_size;
+    char                                  *data;
+
+} DEV_INSTANCE_CFG_DATA_T;
+
+struct device_cfg_collection;
+
+typedef struct device_cfg_collection
+{
+    struct device_cfg_collection *next;
+    char                         *device_name;
+    CFG_TYPE_T                   cfg_type;
+    int                          count;
+    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_begin;
+    DEV_INSTANCE_CFG_DATA_T      *dev_inst_list_end;
+} DEVICE_CFG_T;
+
+
+typedef struct device_cfg_list
+{
+    DEVICE_CFG_T   *device_cfg_begin;
+    int            count;
+} DEVICE_CFG_LIST_T;
+
+/*-----------------------------------------------------------------------------
+ * Functions used locally with in the file.
+ *---------------------------------------------------------------------------*/
+static void p_init_device_cfg_list(void);
+static int  p_add_instance_cfg_data(DEVICE_CFG_T            *p_dev_cfg,
+                                    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data);
+static DEVICE_CFG_T* p_create_dev_cfg(char *device_name);
+static DEVICE_CFG_T* p_get_dev_cfg(char *device_name);
+static int p_set_device_cfg_type(DEVICE_CFG_T     *p_dev_cfg,
+                                 CFG_TYPE_T       cfg_type);
+
+/* PSP Config manager debug */                                 
+#define PSP_CFG_MGR_DEBUG 0
+
+#define dbgPrint if (PSP_CFG_MGR_DEBUG) printk
+
+/*-----------------------------------------------------------------------------
+ * The repository.
+ *---------------------------------------------------------------------------*/
+static DEVICE_CFG_LIST_T g_device_cfg_list;
+
+/*---------------------------------------------
+ * Initialize the device collection pool.
+ *--------------------------------------------*/ 
+void p_init_device_cfg_list(void)
+{
+    g_device_cfg_list.count = 0;
+    g_device_cfg_list.device_cfg_begin = NULL;
+}
+
+/*----------------------------------------------------------------------
+ * Add the device cfg into the device linked list.
+ *---------------------------------------------------------------------*/
+int p_add_dev_cfg_to_list(DEVICE_CFG_LIST_T *p_dev_list,
+                          DEVICE_CFG_T      *p_dev_cfg)
+{
+    if(p_dev_list->count != 0)
+        p_dev_cfg->next            = p_dev_list->device_cfg_begin;
+
+    p_dev_list->device_cfg_begin   = p_dev_cfg;
+
+    p_dev_list->count++;
+
+    return (0);
+}
+
+/*------------------------------------------------------------------
+ * Add the cfg data into the cfg data linked list of the collection.
+ *------------------------------------------------------------------*/
+int p_add_instance_cfg_data(DEVICE_CFG_T                 *p_dev_cfg,
+                            DEV_INSTANCE_CFG_DATA_T      *p_dev_inst_data)
+{
+    if(p_dev_cfg->count == 0)
+        p_dev_cfg->dev_inst_list_begin     = p_dev_inst_data;
+    else
+        p_dev_cfg->dev_inst_list_end->next = p_dev_inst_data;
+        
+    p_dev_cfg->dev_inst_list_end           = p_dev_inst_data;
+
+    p_dev_cfg->count++;
+    
+    return (0);
+}
+
+/*-----------------------------------------------------------------------------
+ * Create the device cfg.
+ *---------------------------------------------------------------------------*/
+DEVICE_CFG_T *p_create_dev_cfg(char *device_name)
+{
+    DEVICE_CFG_T *p_dev_cfg = NULL;
+
+    if((p_dev_cfg = os_malloc(sizeof(DEVICE_CFG_T))) == NULL)
+    {
+        dbgPrint("Failed to allocate memory for DEVICE_CFG_T.\n");
+    }
+    else if((p_dev_cfg->device_name = os_malloc(psp_config_strlen(device_name) + 1))==NULL)
+    {
+        dbgPrint("Failed to allocate memory for device name.\n");
+    }
+    else
+    {
+        psp_config_strcpy(p_dev_cfg->device_name, device_name);
+        p_dev_cfg->cfg_type = en_raw;
+        p_dev_cfg->count = 0;
+        p_dev_cfg->dev_inst_list_begin = NULL;
+        p_dev_cfg->dev_inst_list_end   = NULL;
+        p_dev_cfg->next                = NULL;
+    }
+
+    return(p_dev_cfg);
+}
+
+/*------------------------------------------------------------------------------
+ * Get the device cfg collection.
+ *-----------------------------------------------------------------------------*/
+DEVICE_CFG_T *p_get_dev_cfg(char *device_name)
+{
+    int count               = 0;
+    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
+
+    for(count=0; count < g_device_cfg_list.count; count++)
+    {
+        if(psp_config_strcmp(device_name, p_dev_cfg->device_name) == 0)
+        {
+            break;
+        }
+
+        p_dev_cfg = p_dev_cfg->next;
+    }
+    
+    return(p_dev_cfg); 
+}
+
+/*-------------------------------------------------------------------------
+ * Gets the name for the static cfg type. Utility function. Debug purposes.
+ *-------------------------------------------------------------------------*/
+char *p_get_cfg_type_name_for_en(CFG_TYPE_T  cfg_type)
+{
+    static char raw_str      [] = "still raw";
+    static char compile_str  [] = "configured at compile time";
+    static char optconf_str  [] = "configured by options.conf";
+    static char vlynq_str    [] = "configured by VLYNQ";
+    static char no_static_str[] = "no static configuration";
+
+    if(cfg_type == en_raw)
+        return (raw_str);
+    else if(cfg_type == en_compile)
+        return (compile_str);
+    else if(cfg_type == en_opt_conf)
+        return (optconf_str);
+    else if(cfg_type == en_vlynq)
+        return (vlynq_str);
+    else
+        return (no_static_str);
+
+}
+
+/*-----------------------------------------------------------------------------
+ * Sets the static cfg status of the device collection.
+ *
+ * If the collection is en_virgin then, the collection is assigned to cfg_type.
+ * If the cfg_type is en_vlynq then, the old cfg_type is retained. 
+ * en_compile and en_opt_conf are mutually exclusive. One of these can be 
+ * accomodated.
+ *
+ *---------------------------------------------------------------------------*/
+int p_set_device_cfg_type(DEVICE_CFG_T    *p_dev_cfg,
+                          CFG_TYPE_T      cfg_type)
+{
+    int ret_val = 0;
+
+    if(p_dev_cfg->cfg_type == en_raw)
+        p_dev_cfg->cfg_type = cfg_type;
+    else if((cfg_type == en_vlynq) || (p_dev_cfg->cfg_type == cfg_type))
+        ;
+    else
+    {
+        dbgPrint("Device %s has been %s which overrides %s.\n",
+                  p_dev_cfg->device_name,
+                  p_get_cfg_type_name_for_en(p_dev_cfg->cfg_type),
+                  p_get_cfg_type_name_for_en(cfg_type));
+        ret_val = -1;
+    }
+
+    return(ret_val);
+}
+
+/*------------------------------------------------------------------------
+ * Add the config str into the repository. The cfg type indicates
+ * whether the device has been configured statically, from options.conf or
+ * by vlynq enumeration.
+ *------------------------------------------------------------------------*/
+int psp_config_add(char *key, void *p_cfg_str, unsigned int cfg_len, 
+                   CFG_TYPE_T cfg_type)
+{
+    int                     ret_val           = -1;
+    DEVICE_CFG_T            *p_dev_cfg        = NULL;
+    DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data  = NULL;  
+
+    if(p_cfg_str == NULL || key == NULL)
+    {
+        dbgPrint("Null input pointer(s).\n");
+    }
+    /* check if there exist a dev_cfg for the given key, if not,
+       then create one and add it to the device list. */
+    else if(((p_dev_cfg = p_get_dev_cfg(key)) == NULL) &&
+            (((p_dev_cfg = p_create_dev_cfg(key)) == NULL) ||
+               p_add_dev_cfg_to_list(&g_device_cfg_list, p_dev_cfg) != 0))
+    {
+        dbgPrint("Failed to allocate mem or add dev cfg for %s.\n", key);
+    }
+    /* make sure that we can add this cfg type to the repository */
+    else if(p_set_device_cfg_type(p_dev_cfg, cfg_type) == -1)
+    {
+        dbgPrint("Ignoring \"%s\" for device \"%s\".\n",
+                  p_get_cfg_type_name_for_en(cfg_type),  
+                  p_dev_cfg->device_name); 
+    }
+    else if((p_dev_inst_data = os_malloc(sizeof(DEV_INSTANCE_CFG_DATA_T)))== NULL)
+    {
+        dbgPrint("Failed to allocate memory for DEV_INSTANCE_CFG_DATA_T.\n");
+    }
+    else if((p_dev_inst_data->data = os_malloc(cfg_len) + 1) == NULL)
+    {
+        dbgPrint("Failed to allocate memory for the config data.\n");
+    }
+    else
+    {
+        p_dev_inst_data->next = NULL;
+
+        if(cfg_type == en_opt_conf || cfg_type == en_compile)
+            psp_config_strcpy(p_dev_inst_data->locale, "dev on chip ");
+        else if(cfg_type == en_vlynq)
+            psp_config_strcpy(p_dev_inst_data->locale, "dev on vlynq");
+        else 
+            psp_config_strcpy(p_dev_inst_data->locale, "dev locale ?");
+
+        psp_config_memcpy(p_dev_inst_data->data, p_cfg_str, cfg_len);
+        p_dev_inst_data->data_size = cfg_len;
+        *(p_dev_inst_data->data + cfg_len) = '\0';
+
+        ret_val = p_add_instance_cfg_data(p_dev_cfg, p_dev_inst_data);
+    } 
+
+    return(ret_val);
+}
+
+/*-------------------------------------------------------------
+ * Get the total number of device instances in the repository
+ *------------------------------------------------------------*/
+int psp_config_get_num_keys(void)
+{
+    return(g_device_cfg_list.count);
+}
+
+
+/*--------------------------------------------------------------------
+ * Get the device configuration info from the repository.
+ *-------------------------------------------------------------------*/
+int psp_config_get(char *key, int instance, char **cfg_data_out)
+{
+    int ret_val             = -1;
+    DEVICE_CFG_T *p_dev_cfg = NULL;
+    *cfg_data_out           = NULL;
+
+    if(key == NULL && cfg_data_out == NULL)
+    {
+        dbgPrint("Key has a NULL value.\n");
+    }
+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
+    {
+        dbgPrint("cfg information for %s could not be found.\n", key);
+    }
+    else if(p_dev_cfg->count)
+    {
+         DEV_INSTANCE_CFG_DATA_T *p_dev_inst_data = 
+                                  p_dev_cfg->dev_inst_list_begin;
+         int index = 0;
+         for(index = 0; 
+             index != instance && index < p_dev_cfg->count; 
+             index++)
+         {
+             p_dev_inst_data = p_dev_inst_data->next;
+         }
+
+         if(p_dev_inst_data != NULL && p_dev_inst_data->data != NULL)
+         {
+             *cfg_data_out = p_dev_inst_data->data;
+             ret_val = p_dev_inst_data->data_size;
+         }
+    }
+
+    return (ret_val);
+}
+
+/*----------------------------------------------------------------
+ * Returns the number of instances found in the repository for the
+ * specified key.
+ *---------------------------------------------------------------*/
+int psp_config_get_num_instances(char *key)
+{
+    int ret_val             = 0;
+    DEVICE_CFG_T *p_dev_cfg = NULL;
+
+    if(key == NULL)
+    {
+        dbgPrint("Key has a NULL value.\n");
+    }
+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
+    {
+        dbgPrint("cfg information for %s could not be found.\n", key);
+    }
+    else
+    {
+        ret_val = p_dev_cfg->count;
+    }
+    
+    return (ret_val);
+}
+
+/*------------------------------------------------------------------
+ * Dump the configuration repository. 
+ * Caution: DO NOT USE THIS FOR ANY NON NBU specified config format.
+ *-----------------------------------------------------------------*/
+void psp_config_print(char *key)
+{
+    DEVICE_CFG_T *p_dev_cfg = NULL;
+
+    if(key == NULL)
+    {
+        dbgPrint("Key has a NULL value.\n");
+    }
+    else if((p_dev_cfg = p_get_dev_cfg(key)) == NULL)
+    {
+        dbgPrint("cfg information for %s could not be found.\n", key);
+    }
+    else if(p_dev_cfg && p_dev_cfg->count)
+    {
+        DEV_INSTANCE_CFG_DATA_T   *p_dev_inst_data;
+
+        p_dev_inst_data = p_dev_cfg->dev_inst_list_begin;
+
+        do
+        {
+            dbgPrint("%s : %s\n", p_dev_inst_data->locale, 
+                      p_dev_inst_data->data);
+            p_dev_inst_data = p_dev_inst_data->next;
+
+        } while(p_dev_inst_data);
+    }
+    else
+    {
+        dbgPrint("Nothing was found for %s.\n", key);
+    }
+}
+
+void dump_device_cfg_pool(void)
+{
+    DEVICE_CFG_T *p_dev_cfg = g_device_cfg_list.device_cfg_begin;
+    
+    if(p_dev_cfg != NULL && g_device_cfg_list.count)
+    {
+        int index=0;
+
+        for(index=0; index < g_device_cfg_list.count; index++)
+        {
+            psp_config_print(p_dev_cfg->device_name);
+            p_dev_cfg = p_dev_cfg->next;
+        }
+    }
+    else
+    {
+        dbgPrint("repository is empty.\n");
+    }
+}
+
+void psp_config_init(void)
+{
+    p_init_device_cfg_list();
+}
+
+void psp_config_cleanup()                                                       
+{                                                                               
+    int dev_count              = 0;                                             
+    int inst_count             = 0;                                             
+    DEVICE_CFG_T            *p = g_device_cfg_list.device_cfg_begin;            
+    DEV_INSTANCE_CFG_DATA_T *q = NULL;                                          
+                                                                                
+    for(dev_count = 0; dev_count < g_device_cfg_list.count; dev_count++)        
+    {                                                                           
+        DEVICE_CFG_T            *p_temp = NULL;                                 
+        if(p) q = p->dev_inst_list_begin;                                       
+                                                                                
+        for(inst_count = 0; inst_count < p->count && q != NULL; inst_count++)   
+        {                                                                       
+            DEV_INSTANCE_CFG_DATA_T *q_temp = q;                                
+            q_temp = q->next;                                                   
+            kfree(q->data);                                                     
+            kfree(q);                                                           
+            q = q_temp;                                                         
+        }                                                                       
+                                                                                
+        p_temp = p->next;                                                       
+        kfree(p);                                                               
+        p = p_temp;                                                             
+    }                                                                           
+}                                                                               
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h
--- linux.old/drivers/net/avalanche_cpmac/psp_config_mgr.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_mgr.h	2005-07-12 02:48:42.177573000 +0200
@@ -0,0 +1,110 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager Header
+ ******************************************************************************
+ * FILE NAME:       psp_config_mgr.h
+ *
+ * DESCRIPTION:     Storing and retrieving the configuration based on key
+ * A set of APIs to be used by one and sundry (including drivers and enumerator) to build
+ * and read cfg information of the devices for an avalanche SOC.
+ *
+ * This set of APIs isolates the configuration management from the world and provides simple
+ * access convinience.
+ *
+ * Device in this set refers to the peripherals that can be found on the SOC or on VLYNQ.
+ * The configuration is stored in the form of string and drivers can use these APIs to get
+ * a particular parameter value.
+ *
+ * The memory allocation for the pass back parameters is done by the caller.
+ *
+ * 0 is returned for SUCCESS or TRUE.
+ *  -1 is returned for FAILURE or FALSE.
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+ 
+#ifndef __PSP_CONFIG_MGR_H__
+#define __PSP_CONFIG_MGR_H__
+
+typedef enum cfg_type
+{
+    en_raw     = 0,
+    en_compile,
+    en_opt_conf,
+    en_vlynq
+} CFG_TYPE_T;
+
+/* Build psp configuration */
+void build_psp_config(void);
+ 
+/********************************************************
+ * Access Operations.
+ ********************************************************/
+
+/*------------------------------------------------------------------------- 
+   initializes the configuration repository. 
+ -------------------------------------------------------------------------*/
+void  psp_config_init(void);
+
+/*-------------------------------------------------------------------------- 
+   Adds the configuration information into the repository. 'key' is required 
+   to be NULL terminated string. 'cfg_ptr' points to the configuration data.
+   'cfg_len' is the length of the data pointed to by 'cfg_ptr' in bytes. 
+   'cfg_type' indicates the type of config information.
+
+   psp_config_mgr copies the 'cfg_len' bytes of data pointed to by 'cfg_ptr' 
+   into its internal repository. 
+
+   Returns: 0 on success, -1 on failure.
+  -------------------------------------------------------------------------*/
+int   psp_config_add(char *key, void *cfg_ptr, 
+                     unsigned int cfg_len, CFG_TYPE_T cfg_type);
+
+
+/* --------------------------------------------------------------------------
+   Passes back, in "*cfg_out_val" a pointer to the config data in the repository
+   for the specified 'key' and 'instance'. It returns the size of the config
+   info
+
+   psp_config_mgr passes back a pointer in '*cfg_out_val' which refers to 
+   some location in its internal repository. It is strongly recommended that 
+   if the user intends to modify the contents of the config info for reasons 
+   whatsoever, then, user should allocate memory of size returned by this 
+   routine and copy the contents from '*cfg_out_val'.
+  
+   Any, modification carried out on the repository would lead to un-expected
+   results.
+
+   Returns: 0 or more for the size of config info, -1 on error.
+  --------------------------------------------------------------------------*/ 
+int   psp_config_get(char *key, int instance, char **cfg_out_val);
+
+
+/*--------------------------------------------------------------------------
+   Get the number of keys that have been added in the repository so far.
+
+   Returns: 0 or more for the num of keys, -1 on error.
+  -------------------------------------------------------------------------*/
+int   psp_config_get_num_keys(void);
+
+
+/*--------------------------------------------------------------------------
+   Get the number of instances that are present in the repository for the 
+   given 'key'.
+
+   Returns: 0 or more for the num of instances, -1 on error.
+  -------------------------------------------------------------------------*/  
+int   psp_config_get_num_instances(char *key);
+
+
+/*--------------------------------------------------------------------------
+   Prints the config data for all instances associated with the specified 
+   'key'.
+  -------------------------------------------------------------------------*/
+void  psp_config_print(char *key);
+
+void  dump_device_cfg_pool(void);
+
+#endif /* __PSP_CONFIG_MGR_H__ */
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c
--- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.c	2005-07-12 02:48:42.178573000 +0200
@@ -0,0 +1,362 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Parse API Source
+ ******************************************************************************
+ * FILE NAME:       psp_config_parse.c
+ *
+ * DESCRIPTION:     These APIs should be used only for scanvenging parameters which 
+ *                  are stored in the following format.
+ *
+ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+//#include <stdio.h>
+#include <linux/stddef.h>
+
+/*--------------------------------------------------
+ * MACROS.
+ *-------------------------------------------------*/
+#define my_isdigit(c) (c >= '0' && c <= '9')
+#define my_isoct(c)   (c >= '0' && c <= '7')  
+#define my_xtod(c)    ((c) <= '9' ? (c) - '0' : (c) - 'a' +  10)
+#define my_ifupper(c)    (c >= 'A' && c <= 'F')
+#define XTOD(c)       ((c) - 'A' + 10)
+#define my_ishex(c)   ((c >= 'a' && c <='f') || (c >= 'A' && c<='F') || my_isdigit(c) ) 
+
+/*---------------------------------------------------
+ * Local Functions.
+ *--------------------------------------------------*/
+static int p_get_substr_from_str(char *p_in_str, char begin_delimiter,
+                                 char end_delimiter, int pair_flag,
+                                 char **p_out_str);
+static int p_get_u_int_from_str(char *p_in_str, char begin_delimiter,
+                                char end_delimiter, unsigned long *out_val);
+
+/*---------------------------------------------------
+ * Return pointer to first instance of the char.
+ *--------------------------------------------------*/
+static char* psp_config_strchr(char *str, char chr)
+{
+    while(*str)
+    {
+        if(*str == chr)
+            break;
+        str++;    
+    }
+    
+    return((*str) ? str : NULL);
+}
+
+/*------------------------------------------------------------------------
+ * Convert the string upto delimiter to unsigned long.
+ *-----------------------------------------------------------------------*/
+unsigned long my_atoul(char *p, char end_delimiter, unsigned long *out_val)
+{
+    unsigned long n;
+    int c;
+ 
+    /* check the for null input */    
+    if (!p)
+        return -1;
+     
+    c = *p;    
+    
+    /* pass through the leading spaces */
+    if (!my_isdigit(c)) 
+    {
+        while ( c == ' ')
+            c = *++p;
+            
+    }
+    
+    if (c == '0')
+    {
+        if(*(p + 1) == 'x' || *(p+1) == 'X' ) 
+        {
+            /* string is in hex format */
+
+            p += 2; 
+            c = *p;
+            
+            if(my_ishex(c))
+            {
+               if(my_ifupper(c))
+                   n = XTOD(c);
+               else         
+                       n = my_xtod(c);
+            }
+            else
+                return -1; /* invalid hex string format */
+                
+            while ((c = *++p) && my_ishex(c)) 
+            {
+                n *= 16; 
+                if(my_ifupper(c))
+                   n += XTOD(c);
+                else         
+                       n += my_xtod(c);
+            }
+         }
+        else
+        {
+            /* string is in octal format */
+
+            if( my_isoct(c) )
+            n = c - '0';
+            else
+                return -1; /* invalid octal string format */
+ 
+            while ((c = *++p) && my_isoct(c)) 
+            {
+                n *= 8; 
+                n += c - '0'; 
+            }
+        } 
+         
+    }      
+    else 
+    {
+        /* string is in decimal format */
+ 
+        if( my_isdigit(c) )
+            n = c - '0';
+        else
+            return -1; /* invalid decimal string format */
+
+        while ((c = *++p) && my_isdigit(c)) 
+        {
+            n *= 10; 
+            n += c - '0'; 
+        }
+    }
+   
+    /* move through the trailing spaces */ 
+    while(*p == ' ')
+        p++;
+        
+    if(*p == end_delimiter)
+       {
+           *out_val = n;
+           return 0;
+       }   
+        
+    else
+        return -1; /* invalid string format */
+}
+
+/*---------------------------------------------------------------------------------
+ * Gets the substring de-limited by the 'begin_delimiter' and 'end_delimiter'.
+ * and returns the size of the substring. 
+ *
+ * Parses the NULL terminated p_in_str for a character array delimited by 
+ * begin_delimiter and end_delimiter, passes back the pointer to the character 
+ * array in ' *p_out_str '. The passed pointer ' *p_out_str ' should point to 
+ * the location next (byte) to the begin_delimiter. The function routine returns 
+ * the number of characters excluding the begin_delimiter and end_delimiter, 
+ * found in the array delimited by the said delimiters.
+ *
+ * If the pair_flag is set to 1, then, number of begin_delimiter and end_delimiter
+ * found in the parsing should match (equal) and this routine passes back the 
+ * pointer to the character array, starting at a location next (byte) to the 
+ * first begin_delimiter,  inclusive of all intermediate matching delimiter 
+ * characters found between outer delimiters. If the pair flag is set and if 
+ * begin_delimiter and end_delimiter happens to be same, then error (-1) is 
+ * returned.
+ * 
+ * Return: 0 or more to indicate the size of the substring, -1 on error.
+ *-------------------------------------------------------------------------------*/
+int p_get_substr_from_str(char *p_in_str, char begin_delimiter, 
+                          char end_delimiter, int pair_flag, 
+                          char **p_out_str) 
+{
+    int cnt,pos;
+
+    if(pair_flag  && begin_delimiter == end_delimiter)
+        return -1;
+    
+    if((p_in_str = psp_config_strchr(p_in_str, begin_delimiter)) == 0)
+        return -1; /* no start delimiter found */
+    
+    p_in_str++;      
+    *p_out_str = p_in_str;
+     
+    for(pos = 0,cnt =1; cnt && p_in_str[pos] ; pos++)
+    {
+        if(p_in_str[pos] == end_delimiter)
+        {
+            if(pair_flag == 0)
+                return pos;
+               
+            cnt--;                  
+        }             
+        else if(p_in_str[pos] == begin_delimiter)
+            cnt++;
+        else 
+            ; /* We do nothing */
+      
+    }
+    
+    if( cnt == 0)   
+        return pos - 1;
+    else
+        return -1; /* no corresponding end delimiter found */
+}
+
+/*--------------------------------------------------------------------------    
+ * Parses the NULL terminated p_in_str for unsigned long value delimited by 
+ * begin_delimiter and end_delimiter, passes back the found in ' *out_val '.  
+ * The function routine returns 0 on success and returns -1 on failure. 
+ * The first instance of the de-limiter should be accounted for the parsing.
+ *
+ * The base for unsigned value would 10, octal and hex. The value passed back 
+ * would be of the base 10. Spaces at the begining of the byte array are valid  
+ * and should be ingnored in the calculation of the value. Space character in 
+ * the middle of the byte array or any character other than the valid ones 
+ * (based on base type) should return error. The octal value begins with '0', 
+ * the hex value begins with "0x" or "0X", the base value can begin with 
+ * '1' to '9'.
+ * 
+ * Returns: 0 on success, -1 on failure.
+ *-------------------------------------------------------------------------*/
+int p_get_u_int_from_str(char *p_in_str, char begin_delimiter, 
+                         char end_delimiter, unsigned long *out_val) 
+{
+    char *start;
+    unsigned long num;
+    
+    num = p_get_substr_from_str(p_in_str, begin_delimiter, end_delimiter,
+                                0, &start);
+
+    if(num == (unsigned long)-1)
+        return -1;
+    
+    return my_atoul(start,end_delimiter,out_val);
+}
+
+/*--------------------------------------------------------------------------
+ * Finds the first occurrence of the substring p_find_str in the string
+ * p_in_str. 
+ *-------------------------------------------------------------------------*/
+char *my_strstr(char *p_in_str, const char *p_find_str)
+{
+    char *p = (char *)p_find_str;
+    char *ret = NULL;
+
+    while(*p_in_str)
+    {
+        if(!(*p))
+            return (ret);
+        else if(*p_in_str == *p)
+        {
+            if(!ret) ret = p_in_str;
+            p++;
+            p_in_str++;
+        }
+        else if(ret)
+        {
+            p = (char *)p_find_str;
+            p_in_str = ret + 1;
+            ret = NULL;
+        }
+        else
+            p_in_str++;
+    }
+
+    if(*p_in_str != *p) ret = NULL;
+
+    return (ret);
+
+}
+
+/*------------------------------------------------------------------------------
+ * Gets the value of the config param in the unsigned int format. The value is 
+ * stored in the following format in the string.
+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
+ *-----------------------------------------------------------------------------*/
+int psp_config_get_param_uint(char *p_in_str, const char *param, unsigned int *out_val)
+{
+    int   ret_val = -1;
+    char *p_strstr;
+
+    if(!p_in_str || !param || !out_val) 
+    {
+        ;
+    } 
+    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
+    {
+        ;
+    }
+    else if(p_get_u_int_from_str(p_strstr, '=', ',', (unsigned long *)out_val) == 0)
+    {
+        ret_val = 0;
+    }
+    else if(p_get_u_int_from_str(p_strstr, '=', ']', (unsigned long*)out_val) == 0)
+    {
+        ret_val = 0;
+    }
+    else if(p_get_u_int_from_str(p_strstr, '=', ')', (unsigned long*)out_val) == 0)
+    {
+        ret_val = 0;
+    }
+    else
+    {
+        /* we failed */
+    }
+
+    return (ret_val);
+}
+ 
+/*------------------------------------------------------------------------------
+ * Gets the value of the config param in the Non NULL terminated format. The value 
+ * is stored in the following format in the string. 
+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
+ *-----------------------------------------------------------------------------*/
+int psp_config_get_param_string(char *p_in_str, const char *param, char **out_val)
+{
+    int ret_val = -1;
+    char *p_strstr;
+
+    if(!p_in_str || !param || !(out_val))
+        ;
+    else if((p_strstr = my_strstr(p_in_str, param)) == NULL)
+    {
+        ;
+    }
+    else if((ret_val = p_get_substr_from_str(p_strstr, '[', ']', 1, out_val)) == -1)
+    {
+        ;
+    }
+    else
+    {
+        ; /* we got the value */
+    }   
+ 
+    return (ret_val); 
+} 
+
+#ifdef PSP_CONFIG_MGR_DEBUG_TEST
+main()
+{
+    unsigned long num =999;
+    int ret = 0;
+    char *val1 = NULL;
+    char val[30];
+    char str1[] = "cpmac(id=[cpmac], k0=[a1=[a2=[test], a3=2], k1=100, k2=[k3=300, k4=200], k7=722)";
+
+    psp_config_get_param_uint(str1, "k7", &num);
+    printf("%u.\n", num);    
+    ret = psp_config_get_param_string(str1, "a1", &val1); 
+    if(ret >= 0) { printf("%d.\n", ret); strncpy(val, val1, ret); val[ret] = '\0';}
+    
+    printf("val = \"%s\", and size = %d \n", val, ret);
+
+    if(val[ret]) ; else printf("jeee.\n");
+}
+#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
+
+
+
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h
--- linux.old/drivers/net/avalanche_cpmac/psp_config_parse.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_parse.h	2005-07-12 02:48:42.178573000 +0200
@@ -0,0 +1,32 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Parse API Header
+ ******************************************************************************
+ * FILE NAME:       psp_config_parse.h
+ *
+ * DESCRIPTION:     Parsing for params from string available in the NBU format.
+ *                  These APIs should be used only for scanvenging parameters which 
+ *                  are stored in the following format.
+ *                  
+ *                  str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+#ifndef __PSP_CONFIG_PARSER_H__
+#define __PSP_CONFIG_PARSER_H__
+
+/*------------------------------------------------------------------
+ * These APIs should be used only for scanvenging parameters which 
+ * are stored in the following format.
+ *
+ * str[] = "module(id=[module], k1=v1, k2=[k3=v3, k4=v4], k5=v5)"
+ *-----------------------------------------------------------------*/
+int psp_config_get_param_uint(char *p_in_str, const char *param, 
+                              unsigned int *out_val);
+int psp_config_get_param_string(char *p_in_str, const char *param, 
+                                char **out_val);
+
+#endif /* __PSP_CONFIG_PARSER_H__ */
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.c linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c
--- linux.old/drivers/net/avalanche_cpmac/psp_config_util.c	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.c	2005-07-12 02:48:42.178573000 +0200
@@ -0,0 +1,106 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Utilities API Source
+ ******************************************************************************
+ * FILE NAME:       psp_config_util.c
+ *
+ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
+ *                  Provided here to reduce dependencies on the standard libraries 
+ *                  and for cases where psp_config would required to run before 
+ *                  the whole system is loaded or outside the scope of the OS.
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
+//#include <stdio.h>
+#include "psp_config_util.h"
+#include <linux/stddef.h>
+
+/*---------------------------------------------
+ * strlen.
+ *-------------------------------------------*/
+int psp_config_strlen(char *p)
+{
+    char *p_orig = p;
+    while(*p)
+        p++;
+    return(p - p_orig);
+}
+
+/*--------------------------------------------
+ * strcmp.
+ *-------------------------------------------*/
+int psp_config_strcmp(char *s1, char *s2)
+{
+    while(*s1 && *s2)
+    {
+        if(*s1 != *s2)
+            break;
+        s1++;
+        s2++;
+    }
+
+    return(*s1 - *s2);
+}
+
+/*--------------------------------------------
+ * strcpy.
+ *------------------------------------------*/
+char* psp_config_strcpy(char *dest, char *src)
+{
+    char *dest_orig = dest;
+
+    while(*src)
+    {
+        *dest++ = *src++;
+    }
+
+    *dest = '\0';
+
+    return(dest_orig);
+}
+
+/*----------------------------------------------
+ * psp_config_memcpy.
+ *--------------------------------------------*/
+void* psp_config_memcpy(void* dest, void* src, unsigned int n)
+{
+    void *dest_orig = dest;
+
+    while(n)
+    {
+        *(char *)dest++ = *(char *)src++;
+        n--;
+    }
+
+    return (dest_orig);
+}
+
+/*---------------------------------------------------
+ * Return pointer to first instance of the char.
+ *--------------------------------------------------*/
+char* psp_config_strchr(char *str, char chr)
+{
+    while(*str)
+    {
+        if(*str == chr)
+            break;
+        str++;    
+    }
+    
+    return((*str) ? str : NULL);
+}
+
+#ifdef PSP_CONFIG_MGR_DEBUG_TEST
+
+int main( )
+{
+    char s[] = "hello             ";
+    printf("%d.\n", psp_config_strlen("hello\n"));
+    printf("%d.\n", psp_config_strcmp("hells", "hellq"));
+    printf("%s %s.\n", psp_config_strcpy(s + 6, "test1"), s);
+}
+
+#endif /* PSP_CONFIG_MGR_DEBUG_TEST */
diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_util.h linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h
--- linux.old/drivers/net/avalanche_cpmac/psp_config_util.h	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/psp_config_util.h	2005-07-12 02:48:42.179573000 +0200
@@ -0,0 +1,26 @@
+/******************************************************************************
+ * FILE PURPOSE:    PSP Config Manager - Utilities API Header
+ ******************************************************************************
+ * FILE NAME:       psp_config_util.h
+ *
+ * DESCRIPTION:     These APIs provide the standard "C" string interfaces. 
+ *                  Provided here to reduce dependencies on the standard libraries 
+ *                  and for cases where psp_config would required to run before 
+ *                  the whole system is loaded or outside the scope of the OS.
+ *
+ * REVISION HISTORY:
+ * 27 Nov 02 - PSP TII  
+ *
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+ 
+#ifndef __PSP_CONFIG_UTIL_H__
+#define __PSP_CONFIG_UTIL_H__
+
+extern int   psp_config_strlen(char*);
+extern int   psp_config_strcmp(char*, char*);
+extern char* psp_config_strcpy(char*, char*);
+extern void* psp_config_memcpy(void*, void*, unsigned int n);
+extern char* psp_config_strchr(char*, char);
+
+#endif /* __PSP_CONFIG_UTIL_H__ */
diff -urN linux.old/drivers/net/avalanche_cpmac/readme.txt linux.dev/drivers/net/avalanche_cpmac/readme.txt
--- linux.old/drivers/net/avalanche_cpmac/readme.txt	1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/net/avalanche_cpmac/readme.txt	2005-07-12 02:48:42.179573000 +0200
@@ -0,0 +1,545 @@
+23 August 2004      CPMAC 1.7.8 (NSP Performance Team Release)
+
+CC Labels: REL_20040823_HALdallas_cpmac_01.07.08
+
+New features:  Key "MacAddr" can now be used to set the Mac Address after Open. 
+
+ unsigned char MacAddr[6];
+
+  // Set Mac Address to "00.B0.D0.10.80.C1"     
+  MacAddr[0] = 0x00;
+  MacAddr[1] = 0xB0;
+  MacAddr[2] = 0xD0;
+  MacAddr[3] = 0x10;
+  MacAddr[4] = 0x80;
+  MacAddr[5] = 0xC1;
+      
+  HalFunc->Control(HalDev, "MacAddr", hcSet, &MacAddr);      
+
+Bug fixes: in Send(), Threshold is not checked if Tx Ints are re-enabled.
+
+Modules affected:  hcpmac.c, hcpmac.h, cppi_cpmac.c
+
+22 June 2004          CPMAC 1.7.6 (NSP Performance Team Release)
+
+CC Labels: REL_20040622_HALdallas_cpmac_01.07.06
+
+New features:  Key "TxIntDisable" used to disable Tx Interrupts. If it is set, then Tx Interrupts will be processed on Send() controlled by Tx ServiceMax Setting. 
+
+ int On = 1;
+ HalFunc->Control(HalDev, "TxIntDisable", "Set", &On);
+
+Bug fixes: NTR
+
+10 June 2004          CPMAC 1.7.5 (external release)
+
+CC Labels: REL_20040610_HALdallas_cpmac_01.07.05
+
+New features:  NTR
+
+Bug fixes: Fixed an issue with calculation for the multicast hash.
+
+27 May 2004          CPSAR 1.7.4, CPMAC 1.7.4 (external release)
+
+CC Labels: REL_20040527_HALdallas_cpsar_01.07.04
+           REL_20040527_HALdallas_cpmac_01.07.04
+
+New features:  NTR
+
+Bug fixes: A flaw was fixed in the critical sectioning of the CPPI file, affecting both
+           the MAC and the SAR releases.  This flaw was detected on Titan PSP 4.7 BFT2.
+
+05 May 2004          CPSAR 1.7.3, CPMAC 1.7.3 (external release)
+
+CC Labels: REL_20040505_HALdallas_cpsar_01.07.03
+                REL_20040505_HALdallas_cpmac_01.07.03
+
+New features:  NTR
+
+Bug fixes: 1) Firmware has been updated to fix a problem with Host OAM mode operation.  
+               2) Cache macros have been fixed.
+
+Notes:  This release contains all performance enhancements currently available for CPHAL 1.x.  
+
+19 April 2004          CPSAR 1.7.2, CPMAC 1.7.2 (external release)
+
+CC Labels: REL_20040419_HALdallas_cpsar_01.07.02
+                REL_20040419_HALdallas_cpmac_01.07.02
+
+New features:  NTR
+
+Bug fixes: Fixes merge problem in 1.7.1.
+
+Notes:  This is a branch release which contains only a subset of the performance improvements.
+            The remaining performance improvements are stiill being qualified at this time.
+
+1 April 2004          CPSAR 1.7.1, CPMAC 1.7.1 (external release)
+
+NOTICE: DO NOT USE 1.7.1.  It has a known problem (see 1.7.2 notes)
+
+CC Labels: REL_20040401_HALdallas_cpsar_01.07.01
+                REL_20040401_HALdallas_cpmac_01.07.01
+
+New features:  Performance improvement in CPPI layer, affecting both CPSAR and CPMAC.  
+
+Bug fixes: NTR
+
+17 Februrary 2004    CPSAR 1.7.0 (external release)
+
+CC Labels: REL_20040217_HALdallas_cpsar_01.07.00
+
+New features:  Added support for "TxFlush" feature.  This allows the upper
+               layer to flush all or part of a given Tx queue for a given
+               channel.  This is to be used during call setup for a voice
+               connection.
+
+30 January 2004      CPMAC 1.7.0 (external release)
+
+CC Labels: REL_20040130_HALdallas_cpmac_01.07.00
+
+Bug fixes:    CPMDIO - When in manual negotiate mode and linked, dropping link would move into NWAY state rather than manual state.
+              CPMDIO - Extraneous debug message corrected
+New features: CPMDIO - Support for AutoMdix usage added. 
+
+25 September 2003      CPSAR 1.6.6 (external release)
+
+CC Labels: REL_20030925_HALdallas_cpsar_01.06.06
+
+Bug fixes:   PDSP firmware has been updated to fix the OAM padding problem.  It previously
+             wrote pad bytes into a reserved field of the OAM cell.  There is a small
+             change to the CPSAR configuration code which corresponds to the PDSP spec
+             change.
+
+New features: NTR
+
+09 September 2003      CPMAC 1.6.6 (external release)
+
+CC Labels: REL_20030909_HALdallas_cpmac_01.06.06
+
+Bug fixes:   CPMAC : When _CPMDIO_NOPHY is set, Cpmac COntrol is set to Full Duplex
+             Bridge loopback test does not show a problem using 1.6.5 if packet rate is
+             below 50,000 pbs. Now testing with a 100% send from Ixia.
+
+New features: NTR
+
+05 August 2003         CPHAL 1.6.5 (external release)
+
+CC Labels: REL_20030805_HALdallas_cpmac_01.06.05
+
+Bug fixes: NTR
+
+New features:  CPMAC : Added support for CPMAC modules that do not have a Phy connected.
+               The CPMAC is informed of this by the MdioConnect option
+               _CPMDIO_NOPHY. This is the only driver change needed to
+               receive and transmit packets through the Marvel switch.
+               Note  In this mode Link status will reported linked at 100/FD to
+               PhyNum 0xFFFFFFFF.
+
+               ALL:  Cleaned up some Vlynq support logic.
+
+16 July 2003         CPSAR 1.6.3 (external release), no CPMAC release
+
+CC Labels: REL_20030716_HALdallas_cpsar_01.06.03
+
+Bug fixes: 1) Changed default value of CPCS_UU from 0x5aa5 to 0.  The old default value caused
+              problems with Cisco routers.
+
+New features:  NTR
+
+Known issues not addressed in this release: NTR.
+
+01 July 2003         CPHAL 1.6.2 (external release)
+
+CC Labels: REL_20030701_HALdallas_cpmac_01.06.02
+           REL_20030701_HALdallas_cpsar_01.06.02
+
+Bug fixes: 1) A previous firmware upgrade caused firmware OAM loopback cells to only work on every other
+              command.  This has been fixed in the new firmware version (0.47).
+           2) Problem with PTI values changing on transparent mode packets has been resolved.
+           3) Previously, successful firmware OAM loopback cells waited 5 seconds before notifying the
+              OS of success, rather that notifying immediately.  This has been resolved in firmware.
+           4) PITS #148 (MAC and SAR), #149 (MAC) have been fixed.
+
+New features: 1) AAL5 HAL now capable of receiving unknown VCI/VPI cells on a single transparent channel.
+                 See updated HAL document (AAL5 appendix) for implementation details.
+              2) AAL5 HAL now allows OS to modify the OAM loopback timeout window.  Previously, failed
+                 OAM loopback attempts timed out after a nominal 5 seconds (based on the SAR frequency
+                 provided by the OS).  Now, the default is 5 seconds, but the OS may change the
+                 value via halControl() to any integer number of milliseconds.  See updated HAL document
+                 (AAL5 appendix) for implementation details.
+              3) MAC (cpmdio): added loopback to Istate.  Used for debug.
+
+Known issues not addressed in this release: NTR.
+
+09 June 2003         CPSAR 1.6.1 (external release), CPMAC 1.6.1 (internal release - no functional change)
+
+Note: This is the same set of fixes being applied to 1.6.0 that were applied to 1.5.3.  The only difference
+      between 1.6.1 and 1.5.4 is that 1.6.1 has the TurboDSL fix.
+
+CC Labels: REL_20030609_HALdallas_cpmac_01.06.01
+           REL_20030609_HALdallas_cpsar_01.06.01
+
+Bug fixes: 1) Bug in OamLoopbackConfig fixed.
+           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
+              presence of OAM traffic when operating at or near line rate.
+
+New features: NTR.
+
+09 June 2003         CPSAR 1.5.4 (external release), CPMAC 1.5.4 (internal release - no functional change)
+
+Note:  This is a branch release from 1.5.3.  This does not contain anything from 1.6.0.  The CPMAC is
+only being labeled to keep the release flow consistent.
+
+CC Labels: REL_20030609_HALdallas_cpmac_01.05.04
+           REL_20030609_HALdallas_cpsar_01.05.04
+
+Bug fixes: 1) Bug in OamLoopbackConfig fixed.
+           2) New firmware version (.43) to fix Westell issue of dropped downstream packets in
+              presence of OAM traffic when operating at or near line rate.
+
+New features: NTR.
+
+30 May 2003         CPSAR 1.6.0 (external release), CPMAC 1.6.0 (internal release - no functional change)
+
+CC Labels: REL_20030530_HALdallas_cpmac_01.06.00
+           REL_20030530_HALdallas_cpsar_01.06.00
+
+Bug fixes: 1) TurboDSL issue has been fixed with a software workaround in TxInt.  This workaround
+              has been verified under Adam2 ONLY at this point.  Testing remains to be done on
+              Linux and VxWorks.
+
+New features: NTR.
+
+Known issues not addressed in this release: NTR.
+
+30 May 2003         CPSAR 1.5.3 (external release), CPMAC 1.5.3 (internal release - no functional change)
+
+CC Labels: REL_20030530_HALdallas_cpmac_01.05.03
+           REL_20030530_HALdallas_cpsar_01.05.03
+
+Bug fixes: NTR.
+
+New features: 1) AAL5 Send() has been modified to accept an ATM Header either in the first
+                 fragment by itself, or in the first fragment directly in front of payload data.
+                 The API() does not change.
+              2) Documentation updates throughout, reflected in latest version of CPHAL user's
+                 guide.
+              3) AAL5 MaxFrags default value is now 46.  This is based upon the default AAL5
+                 RxBufSize of 1518 (MaxFrags = (65568/1518) + 2).  IF THE OS CHOOSES A SMALLER
+                 RxBufSize, IT MUST INCREASE THE VALUE OF MaxFrags ACCORDINGLY.  This is done
+                 via halControl(), prior to Open().
+
+Known issues not addressed in this release:
+              1) The Linux SAR driver is seeing an issue in which it cannot
+                 reliably send traffic simultaneously on both the high and
+                 low priority queues of a single AAL5 channel. (TurboDSL)
+
+23 May 2003         CPHAL 1.5.2 (external release)
+
+CC Labels: REL_20030523_HALdallas_cpmac_01.05.02
+           REL_20030523_HALdallas_cpsar_01.05.02
+
+Bug fixes: 1) PITS #138: CPMAC flooding issue resolved.
+           2) PITS #142: OS may now set "MaxFrags" via Control().  This controls the
+              maximum number of fragments expected by the CPHAL.  The default value is 2 for
+              CPMAC and 1028 for AAL5.  If the OS chooses a RxBufSize that will cause more
+              fragments than the defaults, the OS must set "MaxFrags" to a correct value
+              ((maximum packet length / RxBufSize) + 2).
+           3) PITS #143: Fixed.
+           4) Firmware OAM bug fixed. (new firmware release in this version)
+
+New features: NTR.
+
+Known issues not addressed in this release:
+              1) The Linux SAR driver is seeing an issue in which it cannot
+                 reliably send traffic simultaneously on both the high and
+                 low priority queues of a single AAL5 channel. (TurboDSL)
+
+14 May 2003         CPHAL 1.5.1 (external release)
+
+CC Labels: REL_20030514_HALdallas_cpmac_01.05.01
+           REL_20030514_HALdallas_cpsar_01.05.01
+
+Bug fixes:    1) PITS 132 - (CPMAC) Frames < 60 bytes and split into
+                             multi-fragments.
+              2) BCIL MR PSP00000353 - (CPMAC) PhyDev not free'd on halClose()
+              3) PITS 113 - OsSetup bug in ChannelSetup fixed.
+              4) Fixed AAL5 to check return values of InitTcb/InitRcb.
+              5) Fixed Shutdown to properly free resources in the case of a Close
+                 mode 1 followed by Shutdown.  Previously, buffer and descriptor
+                 resources were left unfreed in this case.
+
+New features: 1) AAL5 Send() modified to be capable of accepting ATM header as first four
+                 bytes of first fragment.  This allows the OS to "override" the
+                 default ATM header which is constructed from preconfigured channel
+                 parameters.
+              2) AAL5 Receive() modified to be capable of passing the received ATM header (4 bytes, no HEC)
+                 in the first fragment (by itself).  It also passes up the OS an indication
+                 of what the received packet type was.  For Host OAM and transparent mode
+                 packets, the ATM header is passed in this manner, and for other types of packets
+                 (AAL5, NULL AAL) no ATM header is passed currently.
+
+Known issues not addressed in this release:
+              1) The Linux SAR driver is seeing an issue in which it cannot
+                 reliably send traffic simultaneously on both the high and
+                 low priority queues of a single AAL5 channel.
+
+30 April 2003         CPHAL 1.5.0 (external release)
+
+CC Labels: REL_20030430_HALdallas_cpmac_01.05.00
+           REL_20030430_HALdallas_cpsar_01.05.00
+
+Bug fixes:   1) Fixed AAL5 bug that rendered the low priority queue
+                unusable.
+             2) Fixed a bug in AAL5's Oam Rate calculations.
+             3) Fixed use of "DeviceCPID" key in AAL5's halControl().
+             4) Fixed RxReturn logic in HAL.  The HAL now can handle
+                failing MallocRxBuffer calls when multiple fragments
+                are being used.
+
+New features: 1) AAL5 Stats now available on a per queue basis.
+              2) AAL5 adds two new keys to halControl() for "Set" actions:
+                 RxVc_OamCh and RxVp_OamCh.
+              3) Shutdown() has been modified for both AAL5 and CPMAC to
+                 call Close() if the module is still in the Open state.
+              4) CPMAC adds the following access keys to halControl():
+                 hcPhyAccess,hcPhyNum,hcCpmacBase,hcSize,and hcCpmacSize.
+              5) CPHAL no longer requests an extra 15 bytes on data buffer
+                 mallocs.
+
+Known issues not addressed in this release:
+              1) The Linux SAR driver is seeing an issue in which it cannot
+                 reliably send traffic simultaneously on both the high and
+                 low priority queues of a single AAL5 channel.
+
+21 April 2003         CPHAL 1.4.1 (external release)
+
+CC Labels: REL_20030421_HALdallas_cpmac_01.04.01
+           REL_20030421_HALdallas_cpsar_01.04.01
+
+Bug fixes:   1) Fixed OAM logic in SAR portion of CPHAL.
+
+New features: 1) OAM loopback counters exposed through halControl.
+              2) Host OAM Send() can now use a single channel to send
+                 OAM cells on unlimited number of VP's/VC's.
+              3) CPHAL now requests "SarFreq" through osControl.
+              4) CPHAL now calculates all OAM function rates based on
+                 "SarFreq"; function OamRateConfig removed for API.
+              5) New OAM function OamLoopbackConfig, used for configuring
+                 loopback functions in firmware OAM mode.
+
+Known issues not addressed in this release:  Bug fix 1) in release 1.4
+             (see below) does not work properly for multiple fragments.
+
+10 April 2003         CPHAL 1.4 (external release)
+
+CC Labels: REL_20030410_HALdallas_cpmac_01.04.00
+           REL_20030410_HALdallas_cpsar_01.04.00
+
+This release is for SAR and MAC.
+
+  Bug fixes: 1) Implemented logic in HAL to re-request buffer mallocs
+                in the case of MallocRxBuffer failing.  The HAL now maintains
+                a NeedsBuffer queue of all RCB's that are without buffers.
+                On interrupts, or on Send(), the HAL checks to see if any
+                RCB's are on the queue, and if so, calls MallocRxBuffer
+                to attempt to get a new buffer and return the RCB to
+                circulation.
+             2) SAR now properly returns all error codes from halOpen and
+                halChannelSetup.
+
+  New features: NTR
+
+  Known issues not addressed in this release: NTR
+
+08 April 2003         CPHAL 1.3.1 (internal release - SAR only)
+
+  CC Labels: REL_20030408_HALdallas_cpsar_01.03.01
+
+  This is a SAR only release.  The current CPMAC release is still 1.3.
+
+  Bug fixes: 1) PDSP State RAM / Scratchpad RAM is now completely cleared after reset.
+                This resolves a stability issue.
+
+  New features: 1) OamMode is now a parameter in halControl().  Both "Set" and "Get"
+                   actions are available.  The value may be "0" (Host OAM), or "1"
+                   (Firmware OAM).
+
+  Known issues not addressed in this release:
+             1) Appropriate action for HAL in the case of MallocRxBuffer failing.  We
+                are investigating whether the HAL should implement a needs buffer
+                queue.
+
+04 April 2003         CPHAL 1.3 (external release)
+
+  CC Labels: REL_20030404_HALdallas_cpmac_01.03.00
+             REL_20030404_HALdallas_cpsar_01.03.00
+             REL_20030404_HALdallas_cpaal5_01.03.00
+             REL_20030404_HALdallas_cpaal2_01.03.00
+
+  This release requires no changes for the ethernet end driver.  The changes necessary
+  for the sar driver (firmware file name changes) have already been implemented.
+
+  Bug fixes: 1) RxReturn now returns an error if MallocRxBuffer fails.  On RxReturn error, the driver should
+                call RxReturn again at a later time (when the malloc may succeed) in order for the CPHAL
+                to maintain a full complement of Rx buffers.  We recommend holding off making this driver
+                change until we verify that this condition occurs.
+
+  New features: 1) Removed benign compiler warnings.
+                2) PITS 122: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=122
+                3) Cpsar label (above) now is applied to everything
+                   beneath /cpsar.
+                4) PITS 14: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=14
+                   Transferred to MR PSP 00000089.
+                5) PITS 120: http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=120
+
+  Known issues not addressed in this release:
+             1) PITS 102 (as relating to OamMode configuration):
+                http://www.nbu.sc.ti.com/cgi-bin/pits/redisplay_archive?product=cphal_dev&report=102
+                Future release will make OamMode configurable
+                through halControl(), not on per channel basis.
+
+20 March 2003         CPHAL 1.2.1 (internal release)
+
+  CC Labels: REL_20030320_HALdallas_cpmac_01.02.01
+             REL_20030320_HALdallas_cpsar_01.02.01
+             REL_20030320_HALdallas_cpaal5_01.02.01
+             REL_20030320_HALdallas_cpaal2_01.02.01
+
+  Bug fixes: 1. Fixed modification of buffer pointer following
+                MallocRxBuffer in cppi.c.
+             2. Removed extra firmware files from /cpsar.
+
+  New features: NTR.
+
+  Known issues not addressed in this release: NTR.
+
+07 March 2003         CPHAL 1.2 (external release)
+
+  CPMAC/CPSAR feature complete release.  SAR added
+  several features including full OAM support and various
+  other features and bug fixes to address PITS 99-106, and
+  114.  CPMAC cleaned up details raised by India PSP
+  team.
+
+29 January 2003       CPHAL RC 3.01a (external release)
+
+  Corrects non-static functions to be static in cppi.c.
+
+09 Janurary 2003      CPHAL RC 3.01 (external release)
+
+  PITS 88: Fixed MDIO re-connection problem (hcpmac.c)
+  PITS 90: Corrected Rx Buffer Pointer modification (cppi.c)
+
+  Corrected error in cpremap.c
+
+20 December 2002      CPHAL RC 3 (external release)
+
+  Statistics support via halControl().  See Appendix A of guide.
+  Fixed errors in ChannelTeardown/ChannelSetup CPHAL logic.
+  Added multicast support as requested.
+  Several new OS string functions added to OS_FUNCTIONS.
+  "DebugLevel" configuration parameter changed to "Debug".
+  "Stats0" changed to "StatsDump" for CPMAC.
+
+13 December 2002      CPHAL RC 2.03 (internal release)
+
+  Performance improvements.
+  More debug statements implemented (esp AAL5).
+  Updated makefile with "make debug" option.
+  Hbridge performance: [debug library] 15774 tps (53% line rate)
+                   [non-debug library] 13700 tps (46%)
+
+10 December 2002      CPHAL Release Candidate 2.02 (internal release)
+
+ Much of the configuration code internal to CPMAC and AAL5 has been made common.
+ [os]Receive API had been modified to remove OsReceiveInfo.  This information is now
+   available as third member of the FRAGLIST structure, on a per buffer basis.
+ Successfully tested multi-fragment support on CPMAC, using 32 byte buffers.
+ Code is now Emerald compliant - all buffer descriptors now aligned to cache-line
+   boundaries.
+
+2 December 2002      CPHAL Release Candidate 2.01
+
+ Updates to comments in hcpmac.c, cpmdio.c, hcpmac.h
+ Nested comment in hcpmac.c in RC2 can cause compile errors.
+
+25 November 2002      CPHAL Release Candidate 2
+
+Project Items not completed for RC2
+#6  Ship as Library -  Once under CC. Moved to RC3
+#8  Under Clearcase -  Moved to RC3
+#25 Emerald compliant - Moved to RC3
+#26 Statistics support - Moved to RC3 (some support in RC2)
+#36 Debug scheme implemented - Moved to RC3 (some support in RC2)
+
+8 November 2002       CPHAL Release Candidate 1
+
+Notes:
+
+Project Items not completed for RC1
+
+#8  Under Clearcase -  Clearcase server failure this week. Moved to RC2
+#6  Ship as Library -  Once under CC. Moved to RC2
+#13 Verify Datatypes. Moved to RC2
+#14 Review APIs.  Moved to RC2
+
+APIs under review for RC2
+
+halIsr()
+hslRxReturn()
+halSend()
+osSendComplete()
+osReceive()
+
+
+CPMAC Build Instructions
+
+Compile the file 'hcpmac.c'.
+
+
+AAL5 Build Instructions
+
+The AAL5 build is composed of the source files aal5sar.c and cpsar.c.
+Refer to the provided makefile for an example of compiling these files
+into a library.
+
+Example CPHAL Code
+
+CPMAC:
+
+Example CPMAC code is provided in the file hbridge.c.
+This program is provided simply as an example of using the CPHAL API.
+It is not intended to be compiled and executed in your environment.
+
+AAL5:
+
+Example AAL5 code is provided in the file loopback.c.  This program
+is provided simply as an example of using the CPHAL API.  It is not
+intended to be compiled and executed in your environment.
+
+
+Performance Baseline
+
+
+Cpmac
+
+RC1: hbridge.bin, running with IXIA cpahl_1.cfg.
+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
+     MIPS core 4Kc.
+
+RC2: hbridge.bin, running with IXIA cpahl_1.cfg.
+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
+     MIPS core 4Ke.
+     CPHAL now includes Emerald support, but this has been disabled by using 'cache -wt' to emulate 4Kc.
+
+RC3: hbridge.bin, running with IXIA cpahl_1.cfg.
+     This sends 64-byte packets from each Ixia port, with mac destination the other Ixia port.
+     MIPS core 4Ke.
+     Running as Emerald processor.
+
+Release  Total Receive Rate    Throughput Setting
+
+RC1             11300                 38%
+RC2              9524                 32%
+RC3             15190                 51%
diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
--- linux.old/drivers/net/Config.in	2005-07-12 03:20:45.726149872 +0200
+++ linux.dev/drivers/net/Config.in	2005-07-12 02:48:42.180573000 +0200
@@ -25,6 +25,24 @@
 comment 'Ethernet (10 or 100Mbit)'
 bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
 if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
+   if [ "$CONFIG_MIPS_TITAN" = "y" -o "$CONFIG_AR7" = "y" ]; then
+        tristate '  Texas Instruments Avalanche CPMAC support' CONFIG_MIPS_AVALANCHE_CPMAC	
+   fi
+   if [ "$CONFIG_MIPS_AVALANCHE_CPMAC" != "n" ]; then
+     if [ "$CONFIG_AR7WRD" = "y" -o "$CONFIG_AR7VWI" = "y" -o "$CONFIG_AR7VW" = "y" ]; then
+	 define_bool  CONFIG_MIPS_CPMAC_INIT_BUF_MALLOC y
+         define_int CONFIG_MIPS_CPMAC_PORTS 1
+	 if [ "$CONFIG_MIPS_AVALANCHE_MARVELL" = "y" ]; then
+             define_bool CONFIG_AVALANCHE_LOW_CPMAC  n
+             define_bool CONFIG_AVALANCHE_HIGH_CPMAC y
+	 else
+             define_bool CONFIG_AVALANCHE_CPMAC_AUTO y
+             define_bool CONFIG_AVALANCHE_LOW_CPMAC n
+             define_bool CONFIG_AVALANCHE_HIGH_CPMAC n
+	fi
+     fi
+   fi
+
    if [ "$CONFIG_ARM" = "y" ]; then  
       dep_bool '  ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
       tristate '  Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS
diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
--- linux.old/drivers/net/Makefile	2005-07-12 03:20:45.726149872 +0200
+++ linux.dev/drivers/net/Makefile	2005-07-12 02:48:42.181573000 +0200
@@ -56,6 +56,16 @@
 subdir-$(CONFIG_BONDING) += bonding
 
 #
+# Texas Instruments AVALANCHE CPMAC  driver
+#
+
+subdir-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac
+#obj-$(CONFIG_MIPS_AVALANCHE_CPMAC) += avalanche_cpmac/avalanche_cpmac.o
+ifeq ($(CONFIG_MIPS_AVALANCHE_CPMAC),y)
+  obj-y += avalanche_cpmac/avalanche_cpmac.o
+endif
+
+#
 # link order important here
 #
 obj-$(CONFIG_PLIP) += plip.o
--- linux.old/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 10:56:33.702931008 +0200
+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c	2005-08-25 11:08:45.027451520 +0200
@@ -2158,17 +2158,16 @@
     CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
     CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
     struct sk_buff       *p_skb         = fragList[0].OsInfo;
-    p_skb->len                          = fragList[0].len;    
 
     /* invalidate the cache. */
     dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
 #ifdef CPMAC_TEST
-    xdump(p_skb->data, p_skb->len, "recv");
+    xdump(p_skb->data, fragList[0].len, "recv");
 #endif
 #ifdef CPMAC_8021Q_SUPPORT
     /* 802.1q stuff, just does the basic checking here. */
     if(!p_cpmac_priv->enable_802_1q      &&
-       p_skb->len > TCI_END_OFFSET       &&
+       fragList[0].len > TCI_END_OFFSET       &&
        IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
     {
          goto cpmac_hal_recv_frame_mismatch;