summaryrefslogtreecommitdiff
path: root/target/linux/atheros/patches-2.6.28/100-board.patch
blob: 8b76d07c38d2f64f22f225d161248b8a22cddf82 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -60,6 +60,19 @@ config BCM47XX
 	help
 	 Support for BCM47XX based boards
 
+config ATHEROS
+	bool "Atheros 231x/531x SoC support"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select GENERIC_GPIO
+	help
+	  Support for AR231x and AR531x based boards
+
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select CEVT_R4K
@@ -597,6 +610,7 @@ config WR_PPMC
 
 endchoice
 
+source "arch/mips/ar231x/Kconfig"
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/emma/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -278,6 +278,13 @@ libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
+# Atheros AR5312/AR2312 WiSoC
+#
+core-$(CONFIG_ATHEROS)		+= arch/mips/ar231x/
+cflags-$(CONFIG_ATHEROS)	+= -I$(srctree)/arch/mips/include/asm/mach-ar231x
+load-$(CONFIG_ATHEROS)		+= 0xffffffff80041000
+
+#
 # Cobalt Server
 #
 core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
--- /dev/null
+++ b/arch/mips/ar231x/Kconfig
@@ -0,0 +1,17 @@
+config ATHEROS_AR5312
+	bool "Atheros 5312/2312+ support"
+	depends on ATHEROS
+	default y
+
+config ATHEROS_AR2315
+	bool "Atheros 2315+ support"
+	depends on ATHEROS
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_GPIO
+	default y
--- /dev/null
+++ b/arch/mips/ar231x/Makefile
@@ -0,0 +1,13 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o devices.o
+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
--- /dev/null
+++ b/arch/mips/ar231x/board.c
@@ -0,0 +1,247 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+#include <linux/etherdevice.h>
+#include <asm/irq_cpu.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+
+#include <ar231x_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+void (*ar231x_irq_dispatch)(void);
+
+static inline bool
+check_radio_magic(u8 *addr)
+{
+	addr += 0x7a; /* offset for flash magic */
+	if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
+		return 1;
+	}
+	return 0;
+}
+
+static inline bool
+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
+{
+	/* config magic found */
+	if (*((u32 *)addr) == AR531X_BD_MAGIC)
+		return 1;
+
+	if (!broken)
+		return 0;
+
+	if (check_radio_magic(addr + 0xf8))
+		ar231x_board.radio = addr + 0xf8;
+	if ((addr < flash_limit + 0x10000) &&
+	     check_radio_magic(addr + 0x10000))
+		ar231x_board.radio = addr + 0x10000;
+
+	if (ar231x_board.radio) {
+		/* broken board data detected, use radio data to find the offset,
+		 * user will fix this */
+		return 1;
+	}
+	return 0;
+}
+
+static u8 *
+find_board_config(u8 *flash_limit, bool broken)
+{
+	u8 *addr;
+	int found = 0;
+
+	for (addr = flash_limit - 0x1000;
+		addr >= flash_limit - 0x30000;
+		addr -= 0x1000) {
+
+		if (check_board_data(flash_limit, addr, broken)) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		addr = NULL;
+
+	return addr;
+}
+
+static u8 *
+find_radio_config(u8 *flash_limit, u8 *board_config)
+{
+	int found;
+	u8 *radio_config;
+
+	/*
+	 * Now find the start of Radio Configuration data, using heuristics:
+	 * Search forward from Board Configuration data by 0x1000 bytes
+	 * at a time until we find non-0xffffffff.
+	 */
+	found = 0;
+	for (radio_config = board_config + 0x1000;
+	     (radio_config < flash_limit);
+	     radio_config += 0x1000) {
+		if ((*(u32 *)radio_config != 0xffffffff) &&
+		    check_radio_magic(radio_config)) {
+			found = 1;
+			break;
+		}
+	}
+
+	/* AR2316 relocates radio config to new location */
+	if (!found) {
+	    for (radio_config = board_config + 0xf8;
+			(radio_config < flash_limit - 0x1000 + 0xf8);
+			 radio_config += 0x1000) {
+			if ((*(u32 *)radio_config != 0xffffffff) &&
+				check_radio_magic(radio_config)) {
+				found = 1;
+				break;
+			}
+	    }
+	}
+
+	if (!found) {
+		printk("Could not find Radio Configuration data\n");
+		radio_config = 0;
+	}
+
+	return (u8 *) radio_config;
+}
+
+int __init
+ar231x_find_config(u8 *flash_limit)
+{
+	struct ar231x_boarddata *config;
+	unsigned int rcfg_size;
+	int broken_boarddata = 0;
+	u8 *bcfg, *rcfg;
+	u8 *board_data;
+	u8 *radio_data;
+	u32 offset;
+
+	ar231x_board.config = NULL;
+	ar231x_board.radio = NULL;
+	/* Copy the board and radio data to RAM, because accessing the mapped
+	 * memory of the flash directly after booting is not safe */
+
+	/* Try to find valid board and radio data */
+	bcfg = find_board_config(flash_limit, false);
+
+	/* If that fails, try to at least find valid radio data */
+	if (!bcfg) {
+		bcfg = find_board_config(flash_limit, true);
+		broken_boarddata = 1;
+	}
+
+	if (!bcfg) {
+		printk(KERN_WARNING "WARNING: No board configuration data found!\n");
+		return -ENODEV;
+	}
+
+	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+	ar231x_board.config = (struct ar231x_boarddata *) board_data;
+	memcpy(board_data, bcfg, 0x100);
+	if (broken_boarddata) {
+		printk(KERN_WARNING "WARNING: broken board data detected\n");
+		config = ar231x_board.config;
+		if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
+			printk(KERN_INFO "Fixing up empty mac addresses\n");
+			random_ether_addr(config->enet0_mac);
+			random_ether_addr(config->enet1_mac);
+		}
+	}
+
+
+	/* Radio config starts 0x100 bytes after board config, regardless
+	 * of what the physical layout on the flash chip looks like */
+
+	if (ar231x_board.radio)
+		rcfg = (u8 *) ar231x_board.radio;
+	else
+		rcfg = find_radio_config(flash_limit, bcfg);
+
+	if (!rcfg)
+		return -ENODEV;
+
+	radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
+	ar231x_board.radio = radio_data;
+	offset = radio_data - board_data;
+	printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
+	rcfg_size = BOARD_CONFIG_BUFSZ - offset;
+	memcpy(radio_data, rcfg, rcfg_size);
+
+	return 0;
+}
+
+static void
+ar231x_halt(void)
+{
+	local_irq_disable();
+	while (1);
+}
+
+void __init
+plat_mem_setup(void)
+{
+	_machine_halt = ar231x_halt;
+	pm_power_off = ar231x_halt;
+
+	ar5312_plat_setup();
+	ar2315_plat_setup();
+
+	/* Disable data watchpoints */
+	write_c0_watchlo0(0);
+}
+
+
+asmlinkage void
+plat_irq_dispatch(void)
+{
+	ar231x_irq_dispatch();
+}
+
+void __init
+plat_time_init(void)
+{
+	ar5312_time_init();
+	ar2315_time_init();
+}
+
+unsigned int __cpuinit
+get_c0_compare_irq(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init
+arch_init_irq(void)
+{
+	clear_c0_status(ST0_IM);
+	mips_cpu_irq_init();
+
+	/* Initialize interrupt controllers */
+	ar5312_irq_init();
+	ar2315_irq_init();
+}
+
+
--- /dev/null
+++ b/arch/mips/ar231x/prom.c
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include "ar5312.h"
+#include "ar2315.h"
+
+void __init prom_init(void)
+{
+	ar5312_prom_init();
+	ar2315_prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
@@ -0,0 +1,83 @@
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar231x_boarddata {
+    u32 magic;                       /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
+    u16 cksum;                       /* checksum (starting with BD_REV 2) */
+    u16 rev;                         /* revision of this struct */
+#define BD_REV  4
+    char boardName[64];            /* Name of board */
+    u16 major;                       /* Board major number */
+    u16 minor;                       /* Board minor number */
+    u32 flags;                      /* Board configuration */
+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
+#define BD_UART1        0x00000004   /* UART1 is stuffed */
+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
+#define BD_SYSLED       0x00000020   /* System LED stuffed */
+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
+    u16 resetConfigGpio;             /* Reset factory GPIO pin */
+    u16 sysLedGpio;                  /* System LED GPIO pin */
+
+    u32 cpuFreq;                     /* CPU core frequency in Hz */
+    u32 sysFreq;                     /* System frequency in Hz */
+    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
+
+    u8  wlan0_mac[6];
+    u8  enet0_mac[6];
+    u8  enet1_mac[6];
+
+    u16 pciId;                       /* Pseudo PCIID for common code */
+    u16 memCap;                      /* cap bank1 in MB */
+
+    /* version 3 */
+    u8  wlan1_mac[6];                 /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ		0x1000
+
+/*
+ * Platform device information for the Wireless MAC
+ */
+struct ar231x_board_config {
+	u16 devid;
+
+	/* board config data */
+	struct ar231x_boarddata *config;
+
+	/* radio calibration data */
+	const char *radio;
+};
+
+/*
+ * Platform device information for the Ethernet MAC
+ */
+struct ar231x_eth {
+	u32 reset_base;
+	u32 reset_mac;
+	u32 reset_phy;
+	u32 phy_base;
+	struct ar231x_board_config *config;
+	char *macaddr;
+};
+
+#endif /* __AR531X_PLATFORM_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
@@ -0,0 +1,84 @@
+/*
+ *  Atheros SoC specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_sb1_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+/* #define cpu_has_watch		? */
+/* #define cpu_has_divec		? */
+/* #define cpu_has_vce			? */
+/* #define cpu_has_cache_cdex_p		? */
+/* #define cpu_has_cache_cdex_s		? */
+/* #define cpu_has_prefetch		? */
+/* #define cpu_has_mcheck		? */
+#define cpu_has_ejtag			1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+#  define cpu_has_llsc			1
+#else
+/*
+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
+ * ll/sc instructions.
+ */
+#  define cpu_has_llsc			0
+#endif
+
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+
+/* #define cpu_has_vtag_icache		? */
+/* #define cpu_has_dc_aliases		? */
+/* #define cpu_has_ic_fills_f_dc	? */
+/* #define cpu_has_pindexed_dcache	? */
+
+/* #define cpu_icache_snoops_remote_store	? */
+
+#define cpu_has_mips32r1		1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+#  define cpu_has_mips32r2		1
+#endif
+
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+
+/* #define cpu_has_nofpuex		? */
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_64bit_gp_regs		0
+#define cpu_has_64bit_addresses		0
+
+/* #define cpu_has_inclusive_pcaches	? */
+
+/* #define cpu_dcache_line_size()	? */
+/* #define cpu_icache_line_size()	? */
+
+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+#define PCI_DMA_OFFSET	0x20000000
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+	return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
@@ -0,0 +1,79 @@
+#ifndef _ATHEROS_GPIO_H_
+#define _ATHEROS_GPIO_H_
+
+#include <ar231x.h>
+
+struct ar231x_gpiodev {
+	u32 valid_mask;
+	u32 (*get_output)(void);
+	u32 (*set_output)(u32 mask, u32 val);
+	u32 (*get)(void);
+	u32 (*set)(u32 mask, u32 val);
+};
+
+extern const struct ar231x_gpiodev *ar231x_gpiodev;
+
+/*
+ * Wrappers for the generic GPIO layer
+ */
+
+static inline int gpio_direction_input(unsigned gpio) {
+	u32 mask = 1 << gpio;
+
+	if (!(ar231x_gpiodev->valid_mask & mask))
+		return -ENXIO;
+
+	ar231x_gpiodev->set_output(mask, 0);
+	return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value) {
+	u32 mask = 1 << gpio;
+
+	if (!(ar231x_gpiodev->valid_mask & mask))
+		return;
+
+	ar231x_gpiodev->set(mask, (!!value) * mask);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value) {
+	u32 mask = 1 << gpio;
+
+	if (!(ar231x_gpiodev->valid_mask & mask))
+		return -ENXIO;
+
+	ar231x_gpiodev->set_output(mask, mask);
+	ar231x_gpiodev->set(mask, (!!value) * mask);
+	return 0;
+}
+
+/* Reads the gpio pin.  Unchecked function */
+static inline int gpio_get_value(unsigned gpio) {
+	u32 mask = 1 << gpio;
+
+	if (!(ar231x_gpiodev->valid_mask & mask))
+		return 0;
+
+	return !!(ar231x_gpiodev->get() & mask);
+}
+
+static inline int gpio_request(unsigned gpio, const char *label) {
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio) {
+}
+
+/* Returns IRQ to attach for gpio.  Unchecked function */
+static inline int gpio_to_irq(unsigned gpio) {
+	return AR531X_GPIO_IRQ(gpio);
+}
+
+/* Returns gpio for IRQ attached.  Unchecked function */
+static inline int irq_to_gpio(unsigned irq) {
+	return (irq - (AR531X_GPIO_IRQ(0)));
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/reset.h
@@ -0,0 +1,6 @@
+#ifndef __AR531X_RESET_H
+#define __AR531X_RESET_H
+
+void ar531x_disable_reset_button(void);
+
+#endif /* __AR531X_RESET_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
@@ -0,0 +1,580 @@
+/*
+ * Register definitions for AR2315+
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __AR2315_REG_H
+#define __AR2315_REG_H
+
+/*
+ * IRQs
+ */
+#define AR2315_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR2315_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR2315_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR2315_IRQ_LCBUS_PCI    MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR2315_IRQ_WLAN0_POLL   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+/*
+ * Address map
+ */
+#define AR2315_SPI_READ         0x08000000      /* SPI FLASH */
+#define AR2315_WLAN0            0xB0000000      /* Wireless MMR */
+#define AR2315_PCI              0xB0100000      /* PCI MMR */
+#define AR2315_SDRAMCTL         0xB0300000      /* SDRAM MMR */
+#define AR2315_LOCAL            0xB0400000      /* LOCAL BUS MMR */
+#define AR2315_ENET0            0xB0500000      /* ETHERNET MMR */
+#define AR2315_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
+#define AR2315_UART0            0xB1100003      /* UART MMR */
+#define AR2315_SPI              0xB1300000      /* SPI FLASH MMR */
+#define AR2315_PCIEXT           0x80000000      /* pci external */
+
+/*
+ * Reset Register
+ */
+#define AR2315_COLD_RESET       (AR2315_DSLBASE + 0x0000)
+
+#define AR2315_RESET_COLD_AHB              0x00000001
+#define AR2315_RESET_COLD_APB              0x00000002
+#define AR2315_RESET_COLD_CPU              0x00000004
+#define AR2315_RESET_COLD_CPUWARM          0x00000008
+#define AR2315_RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
+#define AR2317_RESET_SYSTEM                0x00000010
+
+
+#define AR2315_RESET            (AR2315_DSLBASE + 0x0004)
+
+#define AR2315_RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
+#define AR2315_RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
+#define AR2315_RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
+#define AR2315_RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
+#define AR2315_RESET_MEMCTL                0x00000010      /* warm reset memory controller */
+#define AR2315_RESET_LOCAL                 0x00000020      /* warm reset local bus */
+#define AR2315_RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
+#define AR2315_RESET_SPI                   0x00000080      /* warm reset SPI interface */
+#define AR2315_RESET_UART0                 0x00000100      /* warm reset UART0 */
+#define AR2315_RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
+#define AR2315_RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
+#define AR2315_RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
+
+/*
+ * AHB master arbitration control
+ */
+#define AR2315_AHB_ARB_CTL      (AR2315_DSLBASE + 0x0008)
+
+#define AR2315_ARB_CPU                     0x00000001      /* CPU, default */
+#define AR2315_ARB_WLAN                    0x00000002      /* WLAN */
+#define AR2315_ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
+#define AR2315_ARB_LOCAL                   0x00000008      /* LOCAL */
+#define AR2315_ARB_PCI                     0x00000010      /* PCI */
+#define AR2315_ARB_ETHERNET                0x00000020      /* Ethernet */
+#define AR2315_ARB_RETRY                   0x00000100      /* retry policy, debug only */
+
+/*
+ * Config Register
+ */
+#define AR2315_ENDIAN_CTL       (AR2315_DSLBASE + 0x000c)
+
+#define AR2315_CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
+#define AR2315_CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
+#define AR2315_CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
+#define AR2315_CONFIG_PCI                  0x00000008      /* PCI byteswap */
+#define AR2315_CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
+#define AR2315_CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
+#define AR2315_CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
+
+#define AR2315_CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
+#define AR2315_CONFIG_CPU                  0x00000400      /* CPU big endian */
+#define AR2315_CONFIG_PCIAHB               0x00000800
+#define AR2315_CONFIG_PCIAHB_BRIDGE        0x00001000
+#define AR2315_CONFIG_SPI                  0x00008000      /* SPI byteswap */
+#define AR2315_CONFIG_CPU_DRAM             0x00010000
+#define AR2315_CONFIG_CPU_PCI              0x00020000
+#define AR2315_CONFIG_CPU_MMR              0x00040000
+#define AR2315_CONFIG_BIG                  0x00000400
+
+
+/*
+ * NMI control
+ */
+#define AR2315_NMI_CTL          (AR2315_DSLBASE + 0x0010)
+
+#define AR2315_NMI_EN  1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ */
+#define AR2315_SREV             (AR2315_DSLBASE + 0x0014)
+
+#define AR2315_REV_MAJ                     0x00f0
+#define AR2315_REV_MAJ_S                   4
+#define AR2315_REV_MIN                     0x000f
+#define AR2315_REV_MIN_S                   0
+#define AR2315_REV_CHIP                    (AR2315_REV_MAJ|AR2315_REV_MIN)
+
+/*
+ * Interface Enable
+ */
+#define AR2315_IF_CTL           (AR2315_DSLBASE + 0x0018)
+
+#define AR2315_IF_MASK                     0x00000007
+#define AR2315_IF_DISABLED                 0
+#define AR2315_IF_PCI                      1
+#define AR2315_IF_TS_LOCAL                 2
+#define AR2315_IF_ALL                      3   /* only for emulation with separate pins */
+#define AR2315_IF_LOCAL_HOST               0x00000008
+#define AR2315_IF_PCI_HOST                 0x00000010
+#define AR2315_IF_PCI_INTR                 0x00000020
+#define AR2315_IF_PCI_CLK_MASK             0x00030000
+#define AR2315_IF_PCI_CLK_INPUT            0
+#define AR2315_IF_PCI_CLK_OUTPUT_LOW       1
+#define AR2315_IF_PCI_CLK_OUTPUT_CLK       2
+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH      3
+#define AR2315_IF_PCI_CLK_SHIFT            16
+
+/*
+ * APB Interrupt control
+ */
+
+#define AR2315_ISR              (AR2315_DSLBASE + 0x0020)
+#define AR2315_IMR              (AR2315_DSLBASE + 0x0024)
+#define AR2315_GISR             (AR2315_DSLBASE + 0x0028)
+
+#define AR2315_ISR_UART0                   0x0001           /* high speed UART */
+#define AR2315_ISR_I2C_RSVD                0x0002           /* I2C bus */
+#define AR2315_ISR_SPI                     0x0004           /* SPI bus */
+#define AR2315_ISR_AHB                     0x0008           /* AHB error */
+#define AR2315_ISR_APB                     0x0010           /* APB error */
+#define AR2315_ISR_TIMER                   0x0020           /* timer */
+#define AR2315_ISR_GPIO                    0x0040           /* GPIO */
+#define AR2315_ISR_WD                      0x0080           /* watchdog */
+#define AR2315_ISR_IR_RSVD                 0x0100           /* IR */
+
+#define AR2315_GISR_MISC                   0x0001
+#define AR2315_GISR_WLAN0                  0x0002
+#define AR2315_GISR_MPEGTS_RSVD            0x0004
+#define AR2315_GISR_LOCALPCI               0x0008
+#define AR2315_GISR_WMACPOLL               0x0010
+#define AR2315_GISR_TIMER                  0x0020
+#define AR2315_GISR_ETHERNET               0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR2315_INTR_MISCIO      SR_IBIT3
+#define AR2315_INTR_WLAN0       SR_IBIT4
+#define AR2315_INTR_ENET0       SR_IBIT5
+#define AR2315_INTR_LOCALPCI    SR_IBIT6
+#define AR2315_INTR_WMACPOLL    SR_IBIT7
+#define AR2315_INTR_COMPARE     SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR2315_TIMER            (AR2315_DSLBASE + 0x0030)
+#define AR2315_RELOAD           (AR2315_DSLBASE + 0x0034)
+#define AR2315_WD               (AR2315_DSLBASE + 0x0038)
+#define AR2315_WDC              (AR2315_DSLBASE + 0x003c)
+
+#define AR2315_WDC_IGNORE_EXPIRATION       0x00000000
+#define AR2315_WDC_NMI                     0x00000001               /* NMI on watchdog */
+#define AR2315_WDC_RESET                   0x00000002               /* reset on watchdog */
+
+/*
+ * CPU Performance Counters
+ */
+#define AR2315_PERFCNT0         (AR2315_DSLBASE + 0x0048)
+#define AR2315_PERFCNT1         (AR2315_DSLBASE + 0x004c)
+
+#define AR2315_PERF0_DATAHIT                0x0001  /* Count Data Cache Hits */
+#define AR2315_PERF0_DATAMISS               0x0002  /* Count Data Cache Misses */
+#define AR2315_PERF0_INSTHIT                0x0004  /* Count Instruction Cache Hits */
+#define AR2315_PERF0_INSTMISS               0x0008  /* Count Instruction Cache Misses */
+#define AR2315_PERF0_ACTIVE                 0x0010  /* Count Active Processor Cycles */
+#define AR2315_PERF0_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
+#define AR2315_PERF0_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
+
+#define AR2315_PERF1_EB_ARDY                0x0001  /* Count EB_ARdy signal */
+#define AR2315_PERF1_EB_AVALID              0x0002  /* Count EB_AValid signal */
+#define AR2315_PERF1_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
+#define AR2315_PERF1_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
+#define AR2315_PERF1_VRADDR                 0x0010  /* Count valid read address cycles */
+#define AR2315_PERF1_VWADDR                 0x0020  /* Count valid write address cycles */
+#define AR2315_PERF1_VWDATA                 0x0040  /* Count valid write data cycles */
+
+/*
+ * AHB Error Reporting.
+ */
+#define AR2315_AHB_ERR0         (AR2315_DSLBASE + 0x0050)  /* error  */
+#define AR2315_AHB_ERR1         (AR2315_DSLBASE + 0x0054)  /* haddr  */
+#define AR2315_AHB_ERR2         (AR2315_DSLBASE + 0x0058)  /* hwdata */
+#define AR2315_AHB_ERR3         (AR2315_DSLBASE + 0x005c)  /* hrdata */
+#define AR2315_AHB_ERR4         (AR2315_DSLBASE + 0x0060)  /* status */
+
+#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
+                                        /* write 1 to clear all bits in ERR0     */
+#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
+#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
+
+#define AR2315_PROCERR_HMAST               0x0000000f
+#define AR2315_PROCERR_HMAST_DFLT          0
+#define AR2315_PROCERR_HMAST_WMAC          1
+#define AR2315_PROCERR_HMAST_ENET          2
+#define AR2315_PROCERR_HMAST_PCIENDPT      3
+#define AR2315_PROCERR_HMAST_LOCAL         4
+#define AR2315_PROCERR_HMAST_CPU           5
+#define AR2315_PROCERR_HMAST_PCITGT        6
+
+#define AR2315_PROCERR_HMAST_S             0
+#define AR2315_PROCERR_HWRITE              0x00000010
+#define AR2315_PROCERR_HSIZE               0x00000060
+#define AR2315_PROCERR_HSIZE_S             5
+#define AR2315_PROCERR_HTRANS              0x00000180
+#define AR2315_PROCERR_HTRANS_S            7
+#define AR2315_PROCERR_HBURST              0x00000e00
+#define AR2315_PROCERR_HBURST_S            9
+
+/*
+ * Clock Control
+ */
+#define AR2315_PLLC_CTL         (AR2315_DSLBASE + 0x0064)
+#define AR2315_PLLV_CTL         (AR2315_DSLBASE + 0x0068)
+#define AR2315_CPUCLK           (AR2315_DSLBASE + 0x006c)
+#define AR2315_AMBACLK          (AR2315_DSLBASE + 0x0070)
+#define AR2315_SYNCCLK          (AR2315_DSLBASE + 0x0074)
+#define AR2315_DSL_SLEEP_CTL    (AR2315_DSLBASE + 0x0080)
+#define AR2315_DSL_SLEEP_DUR    (AR2315_DSLBASE + 0x0084)
+
+/* PLLc Control fields */
+#define PLLC_REF_DIV_M              0x00000003
+#define PLLC_REF_DIV_S              0
+#define PLLC_FDBACK_DIV_M           0x0000007C
+#define PLLC_FDBACK_DIV_S           2
+#define PLLC_ADD_FDBACK_DIV_M       0x00000080
+#define PLLC_ADD_FDBACK_DIV_S       7
+#define PLLC_CLKC_DIV_M             0x0001c000
+#define PLLC_CLKC_DIV_S             14
+#define PLLC_CLKM_DIV_M             0x00700000
+#define PLLC_CLKM_DIV_S             20
+
+/* CPU CLK Control fields */
+#define CPUCLK_CLK_SEL_M            0x00000003
+#define CPUCLK_CLK_SEL_S            0
+#define CPUCLK_CLK_DIV_M            0x0000000c
+#define CPUCLK_CLK_DIV_S            2
+
+/* AMBA CLK Control fields */
+#define AMBACLK_CLK_SEL_M           0x00000003
+#define AMBACLK_CLK_SEL_S           0
+#define AMBACLK_CLK_DIV_M           0x0000000c
+#define AMBACLK_CLK_DIV_S           2
+
+/*
+ * GPIO
+ */
+#define AR2315_GPIO_DI          (AR2315_DSLBASE + 0x0088)
+#define AR2315_GPIO_DO          (AR2315_DSLBASE + 0x0090)
+#define AR2315_GPIO_CR          (AR2315_DSLBASE + 0x0098)
+#define AR2315_GPIO_INT         (AR2315_DSLBASE + 0x00a0)
+
+#define AR2315_GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
+#define AR2315_GPIO_CR_O(x)                (1 << (x))                  /* output */
+#define AR2315_GPIO_CR_I(x)                (0)                         /* input */
+
+#define AR2315_GPIO_INT_S(x)               (x)                         /* interrupt enable */
+#define AR2315_GPIO_INT_M                  (0x3F)                      /* mask for int */
+#define AR2315_GPIO_INT_LVL(x)             ((x) << 6)                  /* interrupt level */
+#define AR2315_GPIO_INT_LVL_M              ((0x3) << 6)                /* mask for int level */
+
+#define AR2315_GPIO_INT_MAX_Y				1   /* Maximum value of Y for AR5313_GPIO_INT_* macros */
+#define AR2315_GPIO_INT_LVL_OFF				0   /* Triggerring off */
+#define AR2315_GPIO_INT_LVL_LOW				1   /* Low Level Triggered */
+#define AR2315_GPIO_INT_LVL_HIGH			2   /* High Level Triggered */
+#define AR2315_GPIO_INT_LVL_EDGE			3   /* Edge Triggered */
+
+#define AR2315_RESET_GPIO       5
+#define AR2315_NUM_GPIO         22
+
+/*
+ *  PCI Clock Control
+ */
+#define AR2315_PCICLK           (AR2315_DSLBASE + 0x00a4)
+
+#define AR2315_PCICLK_INPUT_M              0x3
+#define AR2315_PCICLK_INPUT_S              0
+
+#define AR2315_PCICLK_PLLC_CLKM            0
+#define AR2315_PCICLK_PLLC_CLKM1           1
+#define AR2315_PCICLK_PLLC_CLKC            2
+#define AR2315_PCICLK_REF_CLK              3
+
+#define AR2315_PCICLK_DIV_M                0xc
+#define AR2315_PCICLK_DIV_S                2
+
+#define AR2315_PCICLK_IN_FREQ              0
+#define AR2315_PCICLK_IN_FREQ_DIV_6        1
+#define AR2315_PCICLK_IN_FREQ_DIV_8        2
+#define AR2315_PCICLK_IN_FREQ_DIV_10       3
+
+/*
+ * Observation Control Register
+ */
+#define AR2315_OCR              (AR2315_DSLBASE + 0x00b0)
+#define OCR_GPIO0_IRIN              0x0040
+#define OCR_GPIO1_IROUT             0x0080
+#define OCR_GPIO3_RXCLR             0x0200
+
+/*
+ *  General Clock Control
+ */
+
+#define AR2315_MISCCLK          (AR2315_DSLBASE + 0x00b4)
+#define MISCCLK_PLLBYPASS_EN        0x00000001
+#define MISCCLK_PROCREFCLK          0x00000002
+
+/*
+ * SDRAM Controller
+ *   - No read or write buffers are included.
+ */
+#define AR2315_MEM_CFG          (AR2315_SDRAMCTL + 0x00)
+#define AR2315_MEM_CTRL         (AR2315_SDRAMCTL + 0x0c)
+#define AR2315_MEM_REF          (AR2315_SDRAMCTL + 0x10)
+
+#define SDRAM_DATA_WIDTH_M          0x00006000
+#define SDRAM_DATA_WIDTH_S          13
+
+#define SDRAM_COL_WIDTH_M           0x00001E00
+#define SDRAM_COL_WIDTH_S           9
+
+#define SDRAM_ROW_WIDTH_M           0x000001E0
+#define SDRAM_ROW_WIDTH_S           5
+
+#define SDRAM_BANKADDR_BITS_M       0x00000018
+#define SDRAM_BANKADDR_BITS_S       3
+
+/*
+ * SPI Flash Interface Registers
+ */
+
+#define AR2315_SPI_CTL      (AR2315_SPI + 0x00)
+#define AR2315_SPI_OPCODE   (AR2315_SPI + 0x04)
+#define AR2315_SPI_DATA     (AR2315_SPI + 0x08)
+
+#define SPI_CTL_START           0x00000100
+#define SPI_CTL_BUSY            0x00010000
+#define SPI_CTL_TXCNT_MASK      0x0000000f
+#define SPI_CTL_RXCNT_MASK      0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
+#define SPI_CTL_SIZE_MASK       0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK    0x03000000
+#define SPI_OPCODE_MASK         0x000000ff
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR2315_PCI_1MS_REG      (AR2315_PCI + 0x0008)
+#define AR2315_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
+
+#define AR2315_PCI_MISC_CONFIG  (AR2315_PCI + 0x000c)
+#define AR2315_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
+#define AR2315_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
+#define AR2315_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
+#define AR2315_PCIMISC_RST_MODE 0x00000030
+#define AR2315_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
+#define AR2315_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
+#define AR2315_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
+#define AR2315_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
+#define AR2315_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
+#define AR2315_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
+
+#define AR2315_PCI_OUT_TSTAMP   (AR2315_PCI + 0x0010)
+
+#define AR2315_PCI_UNCACHE_CFG  (AR2315_PCI + 0x0014)
+
+#define AR2315_PCI_IN_EN        (AR2315_PCI + 0x0100)
+#define AR2315_PCI_IN_EN0       0x01            /* Enable chain 0 */
+#define AR2315_PCI_IN_EN1       0x02            /* Enable chain 1 */
+#define AR2315_PCI_IN_EN2       0x04            /* Enable chain 2 */
+#define AR2315_PCI_IN_EN3       0x08            /* Enable chain 3 */
+
+#define AR2315_PCI_IN_DIS       (AR2315_PCI + 0x0104)
+#define AR2315_PCI_IN_DIS0      0x01            /* Disable chain 0 */
+#define AR2315_PCI_IN_DIS1      0x02            /* Disable chain 1 */
+#define AR2315_PCI_IN_DIS2      0x04            /* Disable chain 2 */
+#define AR2315_PCI_IN_DIS3      0x08            /* Disable chain 3 */
+
+#define AR2315_PCI_IN_PTR       (AR2315_PCI + 0x0200)
+
+#define AR2315_PCI_OUT_EN       (AR2315_PCI + 0x0400)
+#define AR2315_PCI_OUT_EN0      0x01            /* Enable chain 0 */
+
+#define AR2315_PCI_OUT_DIS      (AR2315_PCI + 0x0404)
+#define AR2315_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
+
+#define AR2315_PCI_OUT_PTR      (AR2315_PCI + 0x0408)
+
+#define AR2315_PCI_INT_STATUS   (AR2315_PCI + 0x0500)   /* write one to clr */
+#define AR2315_PCI_TXINT        0x00000001      /* Desc In Completed */
+#define AR2315_PCI_TXOK         0x00000002      /* Desc In OK */
+#define AR2315_PCI_TXERR        0x00000004      /* Desc In ERR */
+#define AR2315_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
+#define AR2315_PCI_RXINT        0x00000010      /* Desc Out Completed */
+#define AR2315_PCI_RXOK         0x00000020      /* Desc Out OK */
+#define AR2315_PCI_RXERR        0x00000040      /* Desc Out ERR */
+#define AR2315_PCI_RXEOL        0x00000080      /* Desc Out EOL */
+#define AR2315_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
+#define AR2315_PCI_MASK         0x0000FFFF      /* Desc Mask */
+#define AR2315_PCI_EXT_INT      0x02000000
+#define AR2315_PCI_ABORT_INT    0x04000000
+
+#define AR2315_PCI_INT_MASK     (AR2315_PCI + 0x0504)   /* same as INT_STATUS */
+
+#define AR2315_PCI_INTEN_REG    (AR2315_PCI + 0x0508)
+#define AR2315_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
+#define AR2315_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
+
+#define AR2315_PCI_HOST_IN_EN   (AR2315_PCI + 0x0800)
+#define AR2315_PCI_HOST_IN_DIS  (AR2315_PCI + 0x0804)
+#define AR2315_PCI_HOST_IN_PTR  (AR2315_PCI + 0x0810)
+#define AR2315_PCI_HOST_OUT_EN  (AR2315_PCI + 0x0900)
+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
+
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR2315_LB_CONFIG        (AR2315_LOCAL + 0x0000)
+#define AR2315_LBCONF_OE        0x00000001      /* =1 OE is low-true */
+#define AR2315_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
+#define AR2315_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
+#define AR2315_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
+#define AR2315_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
+#define AR2315_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
+#define AR2315_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
+#define AR2315_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
+#define AR2315_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
+#define AR2315_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
+#define AR2315_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
+#define AR2315_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
+#define AR2315_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
+#define AR2315_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
+#define AR2315_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
+#define AR2315_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
+#define AR2315_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
+#define AR2315_LBCONF_INT       0x00020000      /* =1 Intr is low true */
+#define AR2315_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
+#define AR2315_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
+#define AR2315_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
+#define AR2315_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
+#define AR2315_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
+
+#define AR2315_LB_CLKSEL        (AR2315_LOCAL + 0x0004)
+#define AR2315_LBCLK_EXT        0x0001          /* use external clk for lb */
+
+#define AR2315_LB_1MS           (AR2315_LOCAL + 0x0008)
+#define AR2315_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
+
+#define AR2315_LB_MISCCFG       (AR2315_LOCAL + 0x000C)
+#define AR2315_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
+#define AR2315_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
+#define AR2315_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
+#define AR2315_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
+#define AR2315_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
+#define AR2315_LBM_TIMEOUT_SHFT 7
+#define AR2315_LBM_PORTMUX      0x07000000
+
+
+#define AR2315_LB_RXTSOFF       (AR2315_LOCAL + 0x0010)
+
+#define AR2315_LB_TX_CHAIN_EN   (AR2315_LOCAL + 0x0100)
+#define AR2315_LB_TXEN_0        0x01
+#define AR2315_LB_TXEN_1        0x02
+#define AR2315_LB_TXEN_2        0x04
+#define AR2315_LB_TXEN_3        0x08
+
+#define AR2315_LB_TX_CHAIN_DIS  (AR2315_LOCAL + 0x0104)
+#define AR2315_LB_TX_DESC_PTR   (AR2315_LOCAL + 0x0200)
+
+#define AR2315_LB_RX_CHAIN_EN   (AR2315_LOCAL + 0x0400)
+#define AR2315_LB_RXEN          0x01
+
+#define AR2315_LB_RX_CHAIN_DIS  (AR2315_LOCAL + 0x0404)
+#define AR2315_LB_RX_DESC_PTR   (AR2315_LOCAL + 0x0408)
+
+#define AR2315_LB_INT_STATUS    (AR2315_LOCAL + 0x0500)
+#define AR2315_INT_TX_DESC      0x0001
+#define AR2315_INT_TX_OK        0x0002
+#define AR2315_INT_TX_ERR       0x0004
+#define AR2315_INT_TX_EOF       0x0008
+#define AR2315_INT_RX_DESC      0x0010
+#define AR2315_INT_RX_OK        0x0020
+#define AR2315_INT_RX_ERR       0x0040
+#define AR2315_INT_RX_EOF       0x0080
+#define AR2315_INT_TX_TRUNC     0x0100
+#define AR2315_INT_TX_STARVE    0x0200
+#define AR2315_INT_LB_TIMEOUT   0x0400
+#define AR2315_INT_LB_ERR       0x0800
+#define AR2315_INT_MBOX_WR      0x1000
+#define AR2315_INT_MBOX_RD      0x2000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR2315_LB_INT_MASK      (AR2315_LOCAL + 0x0504)
+
+#define AR2315_LB_INT_EN        (AR2315_LOCAL + 0x0508)
+#define AR2315_LB_MBOX          (AR2315_LOCAL + 0x0600)
+
+/*
+ * IR Interface Registers
+ */
+#define AR2315_IR_PKTDATA                   (AR2315_IR + 0x0000)
+
+#define AR2315_IR_PKTLEN                    (AR2315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR2315_IR_CONTROL                   (AR2315_IR + 0x0800)
+#define AR2315_IRCTL_TX                     0x00000000  /* use as tranmitter */
+#define AR2315_IRCTL_RX                     0x00000001  /* use as receiver   */
+#define AR2315_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
+#define AR2315_IRCTL_SAMPLECLK_SHFT                  1
+#define AR2315_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
+#define AR2315_IRCTL_OUTPUTCLK_SHFT                 14
+
+#define AR2315_IR_STATUS                    (AR2315_IR + 0x0804)
+#define AR2315_IRSTS_RX                     0x00000001  /* receive in progress */
+#define AR2315_IRSTS_TX                     0x00000002  /* transmit in progress */
+
+#define AR2315_IR_CONFIG                    (AR2315_IR + 0x0808)
+#define AR2315_IRCFG_INVIN                  0x00000001  /* invert input polarity */
+#define AR2315_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
+#define AR2315_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
+#define AR2315_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
+#define AR2315_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
+#define AR2315_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
+#define AR2315_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
+#define AR2315_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
+
+#define HOST_PCI_DEV_ID         3
+#define HOST_PCI_MBAR0          0x10000000
+#define HOST_PCI_MBAR1          0x20000000
+#define HOST_PCI_MBAR2          0x30000000
+
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE    0x800000
+
+#endif /* __AR2315_REG_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
@@ -0,0 +1,236 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+
+#include <asm/addrspace.h>
+
+/*
+ * IRQs
+ */
+
+#define AR5312_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1_INTRS  MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/* Address Map */
+#define AR531X_WLAN0            0x18000000
+#define AR531X_WLAN1            0x18500000
+#define AR531X_ENET0            0x18100000
+#define AR531X_ENET1            0x18200000
+#define AR531X_SDRAMCTL         0x18300000
+#define AR531X_FLASHCTL         0x18400000
+#define AR531X_APBBASE		0x1c000000
+#define AR531X_FLASH            0x1e000000
+#define AR531X_UART0            0xbc000003      /* UART MMR */
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available.  The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC             2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF  0xc8
+#define AR531X_RADIO0_MASK     0x0003
+#define AR531X_RADIO1_MASK     0x000c
+#define AR531X_RADIO1_S        2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC                 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR		(AR531X_APBBASE  + 0x3000)
+#define AR531X_TIMER		(AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR		(AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR		(AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET		(AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1	(AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH   	(AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR		(AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1		(AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR		(AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1		(AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV		(AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI               0x0001
+#define AR531X_WD_CTRL_RESET             0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE		0x0000
+#define AR531X_ISR_TIMER	0x0001
+#define AR531X_ISR_AHBPROC	0x0002
+#define AR531X_ISR_AHBDMA	0x0004
+#define AR531X_ISR_GPIO		0x0008
+#define AR531X_ISR_UART0	0x0010
+#define AR531X_ISR_UART0DMA	0x0020
+#define AR531X_ISR_WD		0x0040
+#define AR531X_ISR_LOCAL	0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
+#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
+#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+        AR531X_RESET_WLAN0 |\
+        AR531X_RESET_WARM_WLAN0_MAC |\
+        AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+        AR531X_RESET_WLAN1 |\
+        AR531X_RESET_WARM_WLAN1_MAC |\
+        AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0              0x0001
+#define AR531X_ENABLE_ENET0              0x0002
+#define AR531X_ENABLE_ENET1              0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ    0xf000
+#define AR531X_REV_WMAC_MAJ_S  12
+#define AR531X_REV_WMAC_MIN    0x0f00
+#define AR531X_REV_WMAC_MIN_S  8
+#define AR531X_REV_MAJ         0x00f0
+#define AR531X_REV_MAJ_S       4
+#define AR531X_REV_MIN         0x000f
+#define AR531X_REV_MIN_S       0
+#define AR531X_REV_CHIP        (AR531X_REV_MAJ|AR531X_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312          0x4
+#define AR531X_REV_MAJ_AR2313          0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
+#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
+#define FLASHCTL_AC_S   16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M   0x00030000
+#define FLASHCTL_AC_2M   0x00040000
+#define FLASHCTL_AC_4M   0x00050000
+#define FLASHCTL_AC_8M   0x00060000
+#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
+#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
+#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
+#define FLASHCTL_WP     0x04000000      /* Write protect */
+#define FLASHCTL_BM     0x08000000      /* Burst mode */
+#define FLASHCTL_MW     0x30000000      /* Memory width */
+#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
+#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
+#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
+#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
+#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
+#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S  8
+#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S  12
+
+/* GPIO Address Map */
+#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
+#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
+#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
+#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
+#define AR531X_GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
+#define AR531X_GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
+#define AR531X_GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
+#define AR531X_NUM_GPIO		8
+
+
+#endif
+
--- /dev/null
+++ b/arch/mips/ar231x/ar5312.c
@@ -0,0 +1,563 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/leds.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <gpio.h>
+
+#include <ar231x_platform.h>
+#include <ar5312_regs.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar5312.h"
+
+#define IS_5312() (current_cpu_data.cputype != CPU_4KEC)
+
+static void
+ar5312_misc_irq_dispatch(void)
+{
+	unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
+
+	if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
+		do_IRQ(AR531X_MISC_IRQ_TIMER);
+		(void)ar231x_read_reg(AR531X_TIMER);
+	} else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
+		do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+	else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
+		do_IRQ(AR531X_MISC_IRQ_UART0);
+	else if (ar231x_misc_intrs & AR531X_ISR_WD)
+		do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+	else
+		do_IRQ(AR531X_MISC_IRQ_NONE);
+}
+
+void
+ar5312_irq_dispatch(void)
+{
+	int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP2)
+		do_IRQ(AR5312_IRQ_WLAN0_INTRS);
+	else if (pending & CAUSEF_IP3)
+		do_IRQ(AR5312_IRQ_ENET0_INTRS);
+	else if (pending & CAUSEF_IP4)
+		do_IRQ(AR5312_IRQ_ENET1_INTRS);
+	else if (pending & CAUSEF_IP5)
+		do_IRQ(AR5312_IRQ_WLAN1_INTRS);
+	else if (pending & CAUSEF_IP6)
+		ar5312_misc_irq_dispatch();
+	else if (pending & CAUSEF_IP7)
+		do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_enable(unsigned int irq)
+{
+	unsigned int imr;
+
+	imr = ar231x_read_reg(AR531X_IMR);
+	imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+	ar231x_write_reg(AR531X_IMR, imr);
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_disable(unsigned int irq)
+{
+	unsigned int imr;
+
+	imr = ar231x_read_reg(AR531X_IMR);
+	imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+	ar231x_write_reg(AR531X_IMR, imr);
+	ar231x_read_reg(AR531X_IMR); /* flush write buffer */
+}
+
+static unsigned int
+ar5312_misc_intr_startup(unsigned int irq)
+{
+	ar5312_misc_intr_enable(irq);
+	return 0;
+}
+
+static void
+ar5312_misc_intr_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		ar5312_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5312_misc_intr_controller = {
+	.name     = "AR5312-MISC",
+	.startup  = ar5312_misc_intr_startup,
+	.shutdown = ar5312_misc_intr_disable,
+	.enable   = ar5312_misc_intr_enable,
+	.disable  = ar5312_misc_intr_disable,
+	.ack      = ar5312_misc_intr_disable,
+	.end      = ar5312_misc_intr_end,
+};
+
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+	u32 proc1 = ar231x_read_reg(AR531X_PROC1);
+	u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
+	u32 dma1 = ar231x_read_reg(AR531X_DMA1);
+	u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR);   /* clears error state */
+
+	printk("AHB interrupt: PROCADDR=0x%8.8x  PROC1=0x%8.8x  DMAADDR=0x%8.8x  DMA1=0x%8.8x\n",
+			procAddr, proc1, dmaAddr, dma1);
+
+	machine_restart("AHB error"); /* Catastrophic failure */
+	return IRQ_HANDLED;
+}
+
+
+static struct irqaction ar5312_ahb_proc_interrupt  = {
+	.handler = ar5312_ahb_proc_handler,
+	.flags   = IRQF_DISABLED,
+	.name    = "ar5312_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade  = {
+	.handler = no_action,
+	.flags   = IRQF_DISABLED,
+	.name    = "cascade",
+};
+
+void __init ar5312_irq_init(void)
+{
+	int i;
+
+	if (!IS_5312())
+		return;
+
+	ar231x_irq_dispatch = ar5312_irq_dispatch;
+	for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
+		int irq = AR531X_MISC_IRQ_BASE + i;
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &ar5312_misc_intr_controller;
+	}
+	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+	setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
+}
+
+const struct ar231x_gpiodev ar5312_gpiodev;
+
+static u32
+ar5312_gpio_get_output(void)
+{
+	u32 reg;
+	reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
+	reg &= ar5312_gpiodev.valid_mask;
+	return reg;
+}
+
+static u32
+ar5312_gpio_set_output(u32 mask, u32 val)
+{
+	u32 reg;
+
+	reg = ar231x_read_reg(AR531X_GPIO_CR);
+	reg |= mask;
+	reg &= ~val;
+	ar231x_write_reg(AR531X_GPIO_CR, reg);
+	return reg;
+}
+
+static u32
+ar5312_gpio_get(void)
+{
+	u32 reg;
+	reg = ar231x_read_reg(AR531X_GPIO_DI);
+	reg &= ar5312_gpiodev.valid_mask;
+	return reg;
+}
+
+static u32
+ar5312_gpio_set(u32 mask, u32 value)
+{
+	u32 reg;
+	reg = ar231x_read_reg(AR531X_GPIO_DO);
+	reg &= ~mask;
+	reg |= value;
+	ar231x_write_reg(AR531X_GPIO_DO, reg);
+	return reg;
+}
+
+const struct ar231x_gpiodev ar5312_gpiodev = {
+	.valid_mask = (1 << 8) - 1,
+	.get_output = ar5312_gpio_get_output,
+	.set_output = ar5312_gpio_set_output,
+	.get = ar5312_gpio_get,
+	.set = ar5312_gpio_set,
+};
+
+static struct physmap_flash_data ar5312_flash_data = {
+	.width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+	.start = AR531X_FLASH,
+	.end = AR531X_FLASH + 0x800000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct ar231x_eth ar5312_eth0_data = {
+	.reset_base = AR531X_RESET,
+	.reset_mac = AR531X_RESET_ENET0,
+	.reset_phy = AR531X_RESET_EPHY0,
+	.phy_base = KSEG1ADDR(AR531X_ENET0),
+	.config = &ar231x_board,
+};
+
+static struct ar231x_eth ar5312_eth1_data = {
+	.reset_base = AR531X_RESET,
+	.reset_mac = AR531X_RESET_ENET1,
+	.reset_phy = AR531X_RESET_EPHY1,
+	.phy_base = KSEG1ADDR(AR531X_ENET1),
+	.config = &ar231x_board,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev.platform_data = &ar5312_flash_data,
+	.resource = &ar5312_flash_resource,
+	.num_resources = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5312_leds[] = {
+	{ .name = "wlan", .gpio = 0, .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ar5312_led_data = {
+	.num_leds = ARRAY_SIZE(ar5312_leds),
+	.leds = (void *) ar5312_leds,
+};
+
+static struct platform_device ar5312_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev.platform_data = (void *) &ar5312_led_data,
+};
+#endif
+
+/*
+ * NB: This mapping size is larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+static char __init *ar5312_flash_limit(void)
+{
+	u32 ctl;
+	/*
+	 * Configure flash bank 0.
+	 * Assume 8M window size. Flash will be aliased if it's smaller
+	 */
+	ctl = FLASHCTL_E |
+		FLASHCTL_AC_8M |
+		FLASHCTL_RBLE |
+		(0x01 << FLASHCTL_IDCY_S) |
+		(0x07 << FLASHCTL_WST1_S) |
+		(0x07 << FLASHCTL_WST2_S) |
+		(ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+	ar231x_write_reg(AR531X_FLASHCTL0, ctl);
+
+	/* Disable other flash banks */
+	ar231x_write_reg(AR531X_FLASHCTL1,
+		ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+	ar231x_write_reg(AR531X_FLASHCTL2,
+		ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+	return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
+}
+
+int __init ar5312_init_devices(void)
+{
+	struct ar231x_boarddata *config;
+	u32 fctl = 0;
+	const u8 *radio;
+	u8 *c;
+
+	if (!IS_5312())
+		return 0;
+
+	/* Locate board/radio config data */
+	ar231x_find_config(ar5312_flash_limit());
+	config = ar231x_board.config;
+
+
+	/*
+	 * Chip IDs and hardware detection for some Atheros
+	 * models are really broken!
+	 *
+	 * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
+	 * as indication for AR2312, which is otherwise
+	 * indistinguishable from the real AR5312.
+	 */
+	if (ar231x_board.radio) {
+		radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
+		if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
+			config->flags |= BD_ISCASPER;
+	} else
+		radio = NULL;
+
+	/* AR2313 has CPU minor rev. 10 */
+	if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+		ar231x_devtype = DEV_TYPE_AR2313;
+
+	/* AR2312 shares the same Silicon ID as AR5312 */
+	else if (config->flags & BD_ISCASPER)
+		ar231x_devtype = DEV_TYPE_AR2312;
+
+	/* Everything else is probably AR5312 or compatible */
+	else
+		ar231x_devtype = DEV_TYPE_AR5312;
+
+	/* fixup flash width */
+	fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
+	switch (fctl) {
+	case FLASHCTL_MWx16:
+		ar5312_flash_data.width = 2;
+		break;
+	case FLASHCTL_MWx8:
+	default:
+		ar5312_flash_data.width = 1;
+		break;
+	}
+
+	platform_device_register(&ar5312_physmap_flash);
+
+#ifdef CONFIG_LEDS_GPIO
+	ar5312_leds[0].gpio = config->sysLedGpio;
+	platform_device_register(&ar5312_gpio_leds);
+#endif
+
+	/* Fix up MAC addresses if necessary */
+	if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
+		memcpy(config->enet0_mac, config->enet1_mac, 6);
+
+	/* If ENET0 and ENET1 have the same mac address,
+	 * increment the one from ENET1 */
+	if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
+		c = config->enet1_mac + 5;
+		while ((c >= config->enet1_mac) && !(++(*c)))
+			c--;
+	}
+
+	switch(ar231x_devtype) {
+	case DEV_TYPE_AR5312:
+		ar5312_eth0_data.macaddr = config->enet0_mac;
+		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
+			AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
+
+		ar5312_eth1_data.macaddr = config->enet1_mac;
+		ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
+			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
+
+		if (!ar231x_board.radio)
+			return 0;
+
+		if (*((u32 *) radio) & AR531X_RADIO0_MASK)
+			ar231x_add_wmac(0, AR531X_WLAN0,
+				AR5312_IRQ_WLAN0_INTRS);
+
+		break;
+	/*
+	 * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
+	 * of ENET1. Atheros calls it 'twisted' for a reason :)
+	 */
+	case DEV_TYPE_AR2312:
+	case DEV_TYPE_AR2313:
+		ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
+		ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
+		ar5312_eth1_data.macaddr = config->enet0_mac;
+		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
+			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
+
+		if (!ar231x_board.radio)
+			return 0;
+		break;
+	default:
+		break;
+	}
+
+	if (*((u32 *) radio) & AR531X_RADIO1_MASK)
+		ar231x_add_wmac(1, AR531X_WLAN1,
+			AR5312_IRQ_WLAN1_INTRS);
+
+	return 0;
+}
+
+
+static void ar5312_restart(char *command)
+{
+	/* reset the system */
+	local_irq_disable();
+	while(1) {
+		ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
+	}
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+	1,
+	2,
+	4,
+	5
+};
+
+
+static int __init
+ar5312_cpu_frequency(void)
+{
+	unsigned int result;
+	unsigned int predivide_mask, predivide_shift;
+	unsigned int multiplier_mask, multiplier_shift;
+	unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+	unsigned int doubler_mask;
+	u16 devid;
+
+	/* Trust the bootrom's idea of cpu frequency. */
+	if ((result = ar231x_read_reg(AR5312_SCRATCH)))
+		return result;
+
+	devid = ar231x_read_reg(AR531X_REV);
+	devid &= AR531X_REV_MAJ;
+	devid >>= AR531X_REV_MAJ_S;
+	if (devid == AR531X_REV_MAJ_AR2313) {
+		predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+	} else { /* AR5312 and AR2312 */
+		predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+	}
+
+	/*
+	 * Clocking is derived from a fixed 40MHz input clock.
+	 *
+	 *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+	 *  sysFreq = cpuFreq / 4	   (used for APB clock, serial,
+	 *							   flash, Timer, Watchdog Timer)
+	 *
+	 *  cntFreq = cpuFreq / 2	   (use for CPU count/compare)
+	 *
+	 * So, for example, with a PLL multiplier of 5, we have
+	 *
+	 *  cpuFreq = 200MHz
+	 *  sysFreq = 50MHz
+	 *  cntFreq = 100MHz
+	 *
+	 * We compute the CPU frequency, based on PLL settings.
+	 */
+
+	clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
+	preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+	preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+	multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+	if (clockCtl1 & doubler_mask) {
+		multiplier = multiplier << 1;
+	}
+	return (40000000 / preDivisor) * multiplier;
+}
+
+static inline int
+ar5312_sys_frequency(void)
+{
+	return ar5312_cpu_frequency() / 4;
+}
+
+void __init
+ar5312_time_init(void)
+{
+	if (!IS_5312())
+		return;
+
+	mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+
+void __init
+ar5312_prom_init(void)
+{
+	u32 memsize, memcfg, bank0AC, bank1AC;
+	u32 devid;
+
+	if (!IS_5312())
+		return;
+
+	/* Detect memory size */
+	memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
+	bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+	bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+	memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+	        + (bank1AC ? (1 << (bank1AC+1)) : 0);
+	memsize <<= 20;
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+	devid = ar231x_read_reg(AR531X_REV);
+	devid >>= AR531X_REV_WMAC_MIN_S;
+	devid &= AR531X_REV_CHIP;
+	ar231x_board.devid = (u16) devid;
+	ar231x_gpiodev = &ar5312_gpiodev;
+}
+
+void __init
+ar5312_plat_setup(void)
+{
+	if (!IS_5312())
+		return;
+
+	/* Clear any lingering AHB errors */
+	ar231x_read_reg(AR531X_PROCADDR);
+	ar231x_read_reg(AR531X_DMAADDR);
+	ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+	_machine_restart = ar5312_restart;
+	ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
+}
+
--- /dev/null
+++ b/arch/mips/ar231x/ar2315.c
@@ -0,0 +1,677 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include <ar231x_platform.h>
+#include <ar2315_regs.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar2315.h"
+
+#define IS_2315() (current_cpu_data.cputype == CPU_4KEC)
+
+static u32 gpiointmask = 0, gpiointval = 0;
+
+static inline void ar2315_gpio_irq(void)
+{
+	u32 pend;
+	int bit = -1;
+
+	/* only do one gpio interrupt at a time */
+	pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
+
+	if (pend) {
+		bit = fls(pend) - 1;
+		pend &= ~(1 << bit);
+		gpiointval ^= (1 << bit);
+	}
+
+	if (!pend)
+		ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
+
+	if (bit >= 0)
+		do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+static void
+ar2315_irq_dispatch(void)
+{
+	int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP3)
+		do_IRQ(AR2315_IRQ_WLAN0_INTRS);
+	else if (pending & CAUSEF_IP4)
+		do_IRQ(AR2315_IRQ_ENET0_INTRS);
+	else if (pending & CAUSEF_IP2) {
+		unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
+
+		if (misc_intr & AR2315_ISR_SPI)
+			do_IRQ(AR531X_MISC_IRQ_SPI);
+		else if (misc_intr & AR2315_ISR_TIMER)
+			do_IRQ(AR531X_MISC_IRQ_TIMER);
+		else if (misc_intr & AR2315_ISR_AHB)
+			do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+		else if (misc_intr & AR2315_ISR_GPIO)
+			ar2315_gpio_irq();
+		else if (misc_intr & AR2315_ISR_UART0)
+			do_IRQ(AR531X_MISC_IRQ_UART0);
+		else if (misc_intr & AR2315_ISR_WD)
+			do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+		else
+			do_IRQ(AR531X_MISC_IRQ_NONE);
+	} else if (pending & CAUSEF_IP7)
+		do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+static void ar2315_set_gpiointmask(int gpio, int level)
+{
+	u32 reg;
+
+	reg = ar231x_read_reg(AR2315_GPIO_INT);
+	reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
+	reg |= gpio | AR2315_GPIO_INT_LVL(level);
+	ar231x_write_reg(AR2315_GPIO_INT, reg);
+}
+
+static void ar2315_gpio_intr_enable(unsigned int irq)
+{
+	unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
+
+	/* reconfigure GPIO line as input */
+	ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
+
+	/* Enable interrupt with edge detection */
+	gpiointmask |= (1 << gpio);
+	ar2315_set_gpiointmask(gpio, 3);
+}
+
+static void ar2315_gpio_intr_disable(unsigned int irq)
+{
+	unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
+
+	/* Disable interrupt */
+	gpiointmask &= ~(1 << gpio);
+	ar2315_set_gpiointmask(gpio, 0);
+}
+
+static unsigned int
+ar2315_gpio_intr_startup(unsigned int irq)
+{
+	ar2315_gpio_intr_enable(irq);
+	return 0;
+}
+
+static void
+ar2315_gpio_intr_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		ar2315_gpio_intr_enable(irq);
+}
+
+static struct irq_chip ar2315_gpio_intr_controller = {
+	.typename	= "AR2315-GPIO",
+	.startup  = ar2315_gpio_intr_startup,
+	.shutdown = ar2315_gpio_intr_disable,
+	.enable   = ar2315_gpio_intr_enable,
+	.disable  = ar2315_gpio_intr_disable,
+	.ack      = ar2315_gpio_intr_disable,
+	.end      = ar2315_gpio_intr_end,
+};
+
+static void
+ar2315_misc_intr_enable(unsigned int irq)
+{
+	unsigned int imr;
+
+	imr = ar231x_read_reg(AR2315_IMR);
+	switch(irq) {
+	case AR531X_MISC_IRQ_SPI:
+		 imr |= AR2315_ISR_SPI;
+		 break;
+	case AR531X_MISC_IRQ_TIMER:
+	     imr |= AR2315_ISR_TIMER;
+	     break;
+	case AR531X_MISC_IRQ_AHB_PROC:
+	     imr |= AR2315_ISR_AHB;
+	     break;
+	case AR531X_MISC_IRQ_GPIO:
+	     imr |= AR2315_ISR_GPIO;
+	     break;
+	case AR531X_MISC_IRQ_UART0:
+	     imr |= AR2315_ISR_UART0;
+	     break;
+	case AR531X_MISC_IRQ_WATCHDOG:
+	     imr |= AR2315_ISR_WD;
+	     break;
+	default:
+		break;
+	}
+	ar231x_write_reg(AR2315_IMR, imr);
+}
+
+static void
+ar2315_misc_intr_disable(unsigned int irq)
+{
+	unsigned int imr;
+
+	imr = ar231x_read_reg(AR2315_IMR);
+	switch(irq) {
+	case AR531X_MISC_IRQ_SPI:
+		 imr &= ~AR2315_ISR_SPI;
+		 break;
+	case AR531X_MISC_IRQ_TIMER:
+	     imr &= ~AR2315_ISR_TIMER;
+	     break;
+	case AR531X_MISC_IRQ_AHB_PROC:
+	     imr &= ~AR2315_ISR_AHB;
+	     break;
+	case AR531X_MISC_IRQ_GPIO:
+	     imr &= ~AR2315_ISR_GPIO;
+	     break;
+	case AR531X_MISC_IRQ_UART0:
+	     imr &= ~AR2315_ISR_UART0;
+	     break;
+	case AR531X_MISC_IRQ_WATCHDOG:
+	     imr &= ~AR2315_ISR_WD;
+	     break;
+	default:
+		break;
+	}
+	ar231x_write_reg(AR2315_IMR, imr);
+}
+
+static unsigned int
+ar2315_misc_intr_startup(unsigned int irq)
+{
+	ar2315_misc_intr_enable(irq);
+	return 0;
+}
+
+static void
+ar2315_misc_intr_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		ar2315_misc_intr_enable(irq);
+}
+
+
+static struct irq_chip ar2315_misc_intr_controller = {
+	.typename	= "AR2315-MISC",
+	.startup  = ar2315_misc_intr_startup,
+	.shutdown = ar2315_misc_intr_disable,
+	.enable   = ar2315_misc_intr_enable,
+	.disable  = ar2315_misc_intr_disable,
+	.ack      = ar2315_misc_intr_disable,
+	.end      = ar2315_misc_intr_end,
+};
+
+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
+{
+    ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
+    ar231x_read_reg(AR2315_AHB_ERR1);
+
+    printk(KERN_ERR "AHB fatal error\n");
+    machine_restart("AHB error"); /* Catastrophic failure */
+
+    return IRQ_HANDLED;
+}
+
+static struct irqaction ar2315_ahb_proc_interrupt  = {
+	.handler	= ar2315_ahb_proc_handler,
+	.flags		= IRQF_DISABLED,
+	.name		= "ar2315_ahb_proc_interrupt",
+};
+
+static struct irqaction cascade  = {
+	.handler	= no_action,
+	.flags		= IRQF_DISABLED,
+	.name		= "cascade",
+};
+
+void
+ar2315_irq_init(void)
+{
+	int i;
+
+	if (!IS_2315())
+		return;
+
+	ar231x_irq_dispatch = ar2315_irq_dispatch;
+	gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
+	for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
+		int irq = AR531X_MISC_IRQ_BASE + i;
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &ar2315_misc_intr_controller;
+	}
+	for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
+		int irq = AR531X_GPIO_IRQ_BASE + i;
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &ar2315_gpio_intr_controller;
+	}
+	setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
+	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
+	setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
+}
+
+const struct ar231x_gpiodev ar2315_gpiodev;
+
+static u32
+ar2315_gpio_get_output(void)
+{
+	u32 reg;
+	reg = ar231x_read_reg(AR2315_GPIO_CR);
+	reg &= ar2315_gpiodev.valid_mask;
+	return reg;
+}
+
+static u32
+ar2315_gpio_set_output(u32 mask, u32 val)
+{
+	u32 reg;
+
+	reg = ar231x_read_reg(AR2315_GPIO_CR);
+	reg &= ~mask;
+	reg |= val;
+	ar231x_write_reg(AR2315_GPIO_CR, reg);
+	return reg;
+}
+
+static u32
+ar2315_gpio_get(void)
+{
+	u32 reg;
+	reg = ar231x_read_reg(AR2315_GPIO_DI);
+	reg &= ar2315_gpiodev.valid_mask;
+	return reg;
+}
+
+static u32
+ar2315_gpio_set(u32 mask, u32 value)
+{
+	u32 reg;
+	reg = ar231x_read_reg(AR2315_GPIO_DO);
+	reg &= ~mask;
+	reg |= value;
+	ar231x_write_reg(AR2315_GPIO_DO, reg);
+	return reg;
+}
+
+const struct ar231x_gpiodev ar2315_gpiodev = {
+	.valid_mask = (1 << 22) - 1,
+	.get_output = ar2315_gpio_get_output,
+	.set_output = ar2315_gpio_set_output,
+	.get = ar2315_gpio_get,
+	.set = ar2315_gpio_set,
+};
+
+static struct ar231x_eth ar2315_eth_data = {
+	.reset_base = AR2315_RESET,
+	.reset_mac = AR2315_RESET_ENET0,
+	.reset_phy = AR2315_RESET_EPHY0,
+	.phy_base = AR2315_ENET0,
+	.config = &ar231x_board,
+};
+
+static struct resource ar2315_spiflash_res[] = {
+	{
+		.name = "flash_base",
+		.flags = IORESOURCE_MEM,
+		.start = KSEG1ADDR(AR2315_SPI_READ),
+		.end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
+	},
+	{
+		.name = "flash_regs",
+		.flags = IORESOURCE_MEM,
+		.start = 0x11300000,
+		.end = 0x11300012,
+	},
+};
+
+static struct platform_device ar2315_spiflash = {
+	.id = 0,
+	.name = "spiflash",
+	.resource = ar2315_spiflash_res,
+	.num_resources = ARRAY_SIZE(ar2315_spiflash_res)
+};
+
+static struct platform_device ar2315_wdt = {
+	.id = 0,
+	.name = "ar2315_wdt",
+};
+
+#define SPI_FLASH_CTL      0x00
+#define SPI_FLASH_OPCODE   0x04
+#define SPI_FLASH_DATA     0x08
+
+static inline u32
+spiflash_read_reg(int reg)
+{
+	return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
+}
+
+static inline void
+spiflash_write_reg(int reg, u32 data)
+{
+	ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
+}
+
+static u32
+spiflash_wait_status(void)
+{
+	u32 reg;
+
+	do {
+		reg = spiflash_read_reg(SPI_FLASH_CTL);
+	} while (reg & SPI_CTL_BUSY);
+
+	return reg;
+}
+
+static u8
+spiflash_probe(void)
+{
+	u32 reg;
+
+	reg = spiflash_wait_status();
+	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
+	reg |= (1 << 4) | 4 | SPI_CTL_START;
+
+	spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
+	spiflash_write_reg(SPI_FLASH_CTL, reg);
+
+	reg = spiflash_wait_status();
+	reg = spiflash_read_reg(SPI_FLASH_DATA);
+	reg &= 0xff;
+
+	return (u8) reg;
+}
+
+
+#define STM_8MBIT_SIGNATURE     0x13
+#define STM_16MBIT_SIGNATURE    0x14
+#define STM_32MBIT_SIGNATURE    0x15
+#define STM_64MBIT_SIGNATURE    0x16
+#define STM_128MBIT_SIGNATURE   0x17
+
+static u8 __init *
+ar2315_flash_limit(void)
+{
+	u32 flash_size = 0;
+
+	/* probe the flash chip size */
+	switch(spiflash_probe()) {
+		case STM_8MBIT_SIGNATURE:
+			flash_size = 0x00100000;
+			break;
+		case STM_16MBIT_SIGNATURE:
+			flash_size = 0x00200000;
+			break;
+		case STM_32MBIT_SIGNATURE:
+			flash_size = 0x00400000;
+			break;
+		case STM_64MBIT_SIGNATURE:
+			flash_size = 0x00800000;
+			break;
+		case STM_128MBIT_SIGNATURE:
+			flash_size = 0x01000000;
+			break;
+	}
+
+	ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
+		flash_size - 1;
+	return (u8 *) ar2315_spiflash_res[0].end + 1;
+}
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar2315_leds[6];
+static struct gpio_led_platform_data ar2315_led_data = {
+	.leds = (void *) ar2315_leds,
+};
+
+static struct platform_device ar2315_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *) &ar2315_led_data,
+	}
+};
+
+static void __init
+ar2315_init_gpio(void)
+{
+	static char led_names[6][6];
+	int i, led = 0;
+
+	ar2315_led_data.num_leds = 0;
+	for(i = 1; i < 8; i++)
+	{
+		if((i == AR2315_RESET_GPIO) ||
+		   (i == ar231x_board.config->resetConfigGpio))
+			continue;
+
+		if(i == ar231x_board.config->sysLedGpio)
+			strcpy(led_names[led], "wlan");
+		else
+			sprintf(led_names[led], "gpio%d", i);
+
+		ar2315_leds[led].name = led_names[led];
+		ar2315_leds[led].gpio = i;
+		ar2315_leds[led].active_low = 0;
+		led++;
+	}
+	ar2315_led_data.num_leds = led;
+	platform_device_register(&ar2315_gpio_leds);
+}
+#else
+static inline void ar2315_init_gpio(void)
+{
+}
+#endif
+
+int __init
+ar2315_init_devices(void)
+{
+	if (!IS_2315())
+		return 0;
+
+	/* Find board configuration */
+	ar231x_find_config(ar2315_flash_limit());
+	ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
+
+	ar2315_init_gpio();
+	platform_device_register(&ar2315_wdt);
+	platform_device_register(&ar2315_spiflash);
+	ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
+		&ar2315_eth_data);
+	ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
+
+	return 0;
+}
+
+static void
+ar2315_restart(char *command)
+{
+	void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
+
+	local_irq_disable();
+
+	/* try reset the system via reset control */
+	ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
+
+	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
+	 * give it some time to attempt a gpio based hardware reset
+	 * (atheros reference design workaround) */
+	gpio_direction_output(AR2315_RESET_GPIO, 0);
+	mdelay(100);
+
+	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+	 * workaround. Attempt to jump to the mips reset location -
+	 * the boot loader itself might be able to recover the system */
+	mips_reset_vec();
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+    1,
+    2,
+    4,
+    5
+};
+
+static int __initdata PLLC_DIVIDE_TABLE[5] = {
+    2,
+    3,
+    4,
+    6,
+    3
+};
+
+static unsigned int __init
+ar2315_sys_clk(unsigned int clockCtl)
+{
+    unsigned int pllcCtrl,cpuDiv;
+    unsigned int pllcOut,refdiv,fdiv,divby2;
+	unsigned int clkDiv;
+
+    pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
+    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
+    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
+    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
+    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
+    divby2 += 1;
+    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
+
+
+    /* clkm input selected */
+	switch(clockCtl & CPUCLK_CLK_SEL_M) {
+		case 0:
+		case 1:
+			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
+			break;
+		case 2:
+			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
+			break;
+		default:
+			pllcOut = 40000000;
+			clkDiv = 1;
+			break;
+	}
+	cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
+	cpuDiv = cpuDiv * 2 ?: 1;
+	return (pllcOut/(clkDiv * cpuDiv));
+}
+
+static inline unsigned int
+ar2315_cpu_frequency(void)
+{
+    return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
+}
+
+static inline unsigned int
+ar2315_apb_frequency(void)
+{
+    return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
+}
+
+void __init
+ar2315_time_init(void)
+{
+	if (!IS_2315())
+		return;
+
+	mips_hpt_frequency = ar2315_cpu_frequency() / 2;
+}
+
+void __init
+ar2315_prom_init(void)
+{
+	u32 memsize, memcfg, devid;
+
+	if (!IS_2315())
+		return;
+
+	memcfg = ar231x_read_reg(AR2315_MEM_CFG);
+	memsize   = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
+	memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
+	memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
+	memsize <<= 3;
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+	/* Detect the hardware based on the device ID */
+	devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
+	switch(devid) {
+		case 0x90:
+		case 0x91:
+			ar231x_devtype = DEV_TYPE_AR2317;
+			break;
+		default:
+			ar231x_devtype = DEV_TYPE_AR2315;
+			break;
+	}
+	ar231x_gpiodev = &ar2315_gpiodev;
+	ar231x_board.devid = devid;
+}
+
+void __init
+ar2315_plat_setup(void)
+{
+	u32 config;
+
+	if (!IS_2315())
+		return;
+
+	/* Clear any lingering AHB errors */
+	config = read_c0_config();
+	write_c0_config(config & ~0x3);
+	ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
+	ar231x_read_reg(AR2315_AHB_ERR1);
+	ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
+
+	_machine_restart = ar2315_restart;
+	ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
+}
--- /dev/null
+++ b/arch/mips/ar231x/ar2315.h
@@ -0,0 +1,37 @@
+#ifndef __AR2315_H
+#define __AR2315_H
+
+#ifdef CONFIG_ATHEROS_AR2315
+
+extern void ar2315_irq_init(void);
+extern int ar2315_init_devices(void);
+extern void ar2315_prom_init(void);
+extern void ar2315_plat_setup(void);
+extern void ar2315_time_init(void);
+
+#else
+
+static inline void ar2315_irq_init(void)
+{
+}
+
+static inline int ar2315_init_devices(void)
+{
+	return 0;
+}
+
+static inline void ar2315_prom_init(void)
+{
+}
+
+static inline void ar2315_plat_setup(void)
+{
+}
+
+static inline void ar2315_time_init(void)
+{
+}
+
+#endif
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/ar5312.h
@@ -0,0 +1,38 @@
+#ifndef __AR5312_H
+#define __AR5312_H
+
+#ifdef CONFIG_ATHEROS_AR5312
+
+extern void ar5312_irq_init(void);
+extern int ar5312_init_devices(void);
+extern void ar5312_prom_init(void);
+extern void ar5312_plat_setup(void);
+extern void ar5312_time_init(void);
+extern void ar5312_time_init(void);
+
+#else
+
+static inline void ar5312_irq_init(void)
+{
+}
+
+static inline int ar5312_init_devices(void)
+{
+	return 0;
+}
+
+static inline void ar5312_prom_init(void)
+{
+}
+
+static inline void ar5312_plat_setup(void)
+{
+}
+
+static inline void ar5312_time_init(void)
+{
+}
+
+#endif
+
+#endif
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
@@ -0,0 +1,54 @@
+#ifndef __AR531X_H
+#define __AR531X_H
+
+#define AR531X_MISC_IRQ_BASE		0x20
+#define AR531X_GPIO_IRQ_BASE		0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE		AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER		AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC	AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA		AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO		AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0		AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA	AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG	AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL		AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_SPI 		AR531X_MISC_IRQ_BASE+9
+#define AR531X_MISC_IRQ_COUNT		10
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE            AR531X_GPIO_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+n
+#define AR531X_GPIO_IRQ_COUNT           22
+
+static inline u32
+ar231x_read_reg(u32 reg)
+{
+	return __raw_readl((u32 *) KSEG1ADDR(reg));
+}
+
+static inline void
+ar231x_write_reg(u32 reg, u32 val)
+{
+	__raw_writel(val, (u32 *) KSEG1ADDR(reg));
+}
+
+static inline u32
+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
+{
+	u32 ret;
+
+	ret = ar231x_read_reg(reg);
+	ret &= ~mask;
+	ret |= val;
+	ar231x_write_reg(reg, ret);
+
+	return ret;
+}
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/devices.h
@@ -0,0 +1,27 @@
+#ifndef __AR231X_DEVICES_H
+#define __AR231X_DEVICES_H
+
+enum {
+	/* handled by ar5312.c */
+	DEV_TYPE_AR2312,
+	DEV_TYPE_AR2313,
+	DEV_TYPE_AR5312,
+
+	/* handled by ar2315.c */
+	DEV_TYPE_AR2315,
+	DEV_TYPE_AR2316,
+	DEV_TYPE_AR2317,
+
+	DEV_TYPE_UNKNOWN
+};
+
+extern int ar231x_devtype;
+extern struct ar231x_board_config ar231x_board;
+extern void (*ar231x_irq_dispatch)(void);
+
+extern int ar231x_find_config(u8 *flash_limit);
+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
+extern int ar231x_add_wmac(int nr, u32 base, int irq);
+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/devices.c
@@ -0,0 +1,174 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <ar231x_platform.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+struct ar231x_board_config ar231x_board;
+int ar231x_devtype = DEV_TYPE_UNKNOWN;
+const struct ar231x_gpiodev *ar231x_gpiodev;
+
+static struct resource ar231x_eth0_res[] = {
+	{
+		.name = "eth0_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "eth0_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource ar231x_eth1_res[] = {
+	{
+		.name = "eth1_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "eth1_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device ar231x_eth[] = {
+	{
+		.id = 0,
+		.name = "ar231x-eth",
+		.resource = ar231x_eth0_res,
+		.num_resources = ARRAY_SIZE(ar231x_eth0_res)
+	},
+	{
+		.id = 1,
+		.name = "ar231x-eth",
+		.resource = ar231x_eth1_res,
+		.num_resources = ARRAY_SIZE(ar231x_eth1_res)
+	}
+};
+
+static struct resource ar231x_wmac0_res[] = {
+	{
+		.name = "wmac0_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "wmac0_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource ar231x_wmac1_res[] = {
+	{
+		.name = "wmac1_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "wmac1_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+
+static struct platform_device ar231x_wmac[] = {
+	{
+		.id = 0,
+		.name = "ar231x-wmac",
+		.resource = ar231x_wmac0_res,
+		.num_resources = ARRAY_SIZE(ar231x_wmac0_res),
+		.dev.platform_data = &ar231x_board,
+	},
+	{
+		.id = 1,
+		.name = "ar231x-wmac",
+		.resource = ar231x_wmac1_res,
+		.num_resources = ARRAY_SIZE(ar231x_wmac1_res),
+		.dev.platform_data = &ar231x_board,
+	},
+};
+
+static const char *devtype_strings[] = {
+	[DEV_TYPE_AR5312] = "Atheros AR5312",
+	[DEV_TYPE_AR2312] = "Atheros AR2312",
+	[DEV_TYPE_AR2313] = "Atheros AR2313",
+	[DEV_TYPE_AR2315] = "Atheros AR2315",
+	[DEV_TYPE_AR2316] = "Atheros AR2316",
+	[DEV_TYPE_AR2317] = "Atheros AR2317",
+	[DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
+};
+
+const char *get_system_type(void)
+{
+	if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
+		!devtype_strings[ar231x_devtype])
+		return devtype_strings[DEV_TYPE_UNKNOWN];
+	return devtype_strings[ar231x_devtype];
+}
+
+
+int __init
+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
+{
+	struct resource *res;
+
+	ar231x_eth[nr].dev.platform_data = pdata;
+	res = &ar231x_eth[nr].resource[0];
+	res->start = base;
+	res->end = base + 0x2000 - 1;
+	res++;
+	res->start = irq;
+	res->end = irq;
+	return platform_device_register(&ar231x_eth[nr]);
+}
+
+void __init
+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
+{
+	struct uart_port s;
+
+	memset(&s, 0, sizeof(s));
+
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	s.iotype = UPIO_MEM;
+	s.irq = AR531X_MISC_IRQ_UART0;
+	s.regshift = 2;
+	s.mapbase = mapbase;
+	s.uartclk = uartclk;
+	s.membase = (void __iomem *)s.mapbase;
+
+	early_serial_setup(&s);
+}
+
+int __init
+ar231x_add_wmac(int nr, u32 base, int irq)
+{
+	struct resource *res;
+
+	ar231x_wmac[nr].dev.platform_data = &ar231x_board;
+	res = &ar231x_wmac[nr].resource[0];
+	res->start = base;
+	res->end = base + 0x10000 - 1;
+	res++;
+	res->start = irq;
+	res->end = irq;
+	return platform_device_register(&ar231x_wmac[nr]);
+}
+
+static int __init ar231x_register_devices(void)
+{
+	static struct resource res = {
+		.start = 0xFFFFFFFF,
+	};
+
+	platform_device_register_simple("GPIODEV", 0, &res, 1);
+	ar5312_init_devices();
+	ar2315_init_devices();
+
+	return 0;
+}
+
+device_initcall(ar231x_register_devices);