summaryrefslogtreecommitdiff
path: root/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h
blob: f609f3c2eb45a9c4cc26c3c1fc291338204efdba (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
/*
 * Broadcom SiliconBackplane hardware register definitions.
 *
 * Copyright 2007, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 *
 * $Id$
 */

#ifndef	_SBCONFIG_H
#define	_SBCONFIG_H
#include "linuxver.h"

/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define	_PADLINE(line)	pad ## line
#define	_XSTR(line)	_PADLINE(line)
#define	PAD		_XSTR(__LINE__)
#endif

/*
 * SiliconBackplane Address Map.
 * All regions may not exist on all chips.
 */
#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
#define SB_PCI_MEM		0x08000000	/* Host Mode sb2pcitranslation0 (64 MB) */
#define SB_PCI_MEM_SZ		(64 * 1024 * 1024)
#define SB_PCI_CFG		0x0c000000	/* Host Mode sb2pcitranslation1 (64 MB) */
#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */

#define	SB_FLASH2		0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
#define	SB_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
#define	SB_ARMCM3_ROM		0x1e000000	/* ARM Cortex-M3 ROM */
#define	SB_FLASH1		0x1fc00000	/* MIPS Flash Region 1 */
#define	SB_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
#define	SB_ARM7S_ROM		0x20000000	/* ARM7TDMI-S ROM */
#define	SB_ARMCM3_SRAM2		0x60000000	/* ARM Cortex-M3 SRAM Region 2 */
#define	SB_ARM7S_SRAM2		0x80000000	/* ARM7TDMI-S SRAM Region 2 */
#define	SB_ARM_FLASH1		0xffff0000	/* ARM Flash Region 1 */
#define	SB_ARM_FLASH1_SZ	0x00010000	/* ARM Size of Flash Region 1 */

#define SB_PCI_DMA		0x40000000	/* Client Mode sb2pcitranslation2 (1 GB) */
#define SB_PCI_DMA_SZ		0x40000000	/* Client Mode sb2pcitranslation2 size in bytes */
#define SB_PCIE_DMA_L32		0x00000000	/* PCIE Client Mode sb2pcitranslation2
						 * (2 ZettaBytes), low 32 bits
						 */
#define SB_PCIE_DMA_H32		0x80000000	/* PCIE Client Mode sb2pcitranslation2
						 * (2 ZettaBytes), high 32 bits
						 */
#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)


/* enumeration space related defs */
#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
#define SB_MAXFUNCS		4		/* max. # functions per core */
#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */

/* mips address */
#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */

/*
 * Sonics Configuration Space Registers.
 */
#define SBIPSFLAG		0x08
#define SBTPSFLAG		0x18
#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
#define SBADMATCH3		0x60
#define SBADMATCH2		0x68
#define SBADMATCH1		0x70
#define SBIMSTATE		0x90
#define SBINTVEC		0x94
#define SBTMSTATELOW		0x98
#define SBTMSTATEHIGH		0x9c
#define SBBWA0			0xa0
#define SBIMCONFIGLOW		0xa8
#define SBIMCONFIGHIGH		0xac
#define SBADMATCH0		0xb0
#define SBTMCONFIGLOW		0xb8
#define SBTMCONFIGHIGH		0xbc
#define SBBCONFIG		0xc0
#define SBBSTATE		0xc8
#define SBACTCNFG		0xd8
#define	SBFLAGST		0xe8
#define SBIDLOW			0xf8
#define SBIDHIGH		0xfc

/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
 * a few registers *below* that line. I think it would be very confusing to try
 * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
 */

#define SBIMERRLOGA		0xea8
#define SBIMERRLOG		0xeb0
#define SBTMPORTCONNID0		0xed8
#define SBTMPORTLOCK0		0xef8

#ifndef _LANGUAGE_ASSEMBLY

typedef volatile struct _sbconfig {
	uint32	PAD[2];
	uint32	sbipsflag;		/* initiator port ocp slave flag */
	uint32	PAD[3];
	uint32	sbtpsflag;		/* target port ocp slave flag */
	uint32	PAD[11];
	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
	uint32	PAD;
	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
	uint32	PAD[3];
	uint32	sbadmatch3;		/* address match3 */
	uint32	PAD;
	uint32	sbadmatch2;		/* address match2 */
	uint32	PAD;
	uint32	sbadmatch1;		/* address match1 */
	uint32	PAD[7];
	uint32	sbimstate;		/* initiator agent state */
	uint32	sbintvec;		/* interrupt mask */
	uint32	sbtmstatelow;		/* target state */
	uint32	sbtmstatehigh;		/* target state */
	uint32	sbbwa0;			/* bandwidth allocation table0 */
	uint32	PAD;
	uint32	sbimconfiglow;		/* initiator configuration */
	uint32	sbimconfighigh;		/* initiator configuration */
	uint32	sbadmatch0;		/* address match0 */
	uint32	PAD;
	uint32	sbtmconfiglow;		/* target configuration */
	uint32	sbtmconfighigh;		/* target configuration */
	uint32	sbbconfig;		/* broadcast configuration */
	uint32	PAD;
	uint32	sbbstate;		/* broadcast state */
	uint32	PAD[3];
	uint32	sbactcnfg;		/* activate configuration */
	uint32	PAD[3];
	uint32	sbflagst;		/* current sbflags */
	uint32	PAD[3];
	uint32	sbidlow;		/* identification */
	uint32	sbidhigh;		/* identification */
} sbconfig_t;

#endif /* _LANGUAGE_ASSEMBLY */

/* sbipsflag */
#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
#define	SBIPS_INT1_SHIFT	0
#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
#define	SBIPS_INT2_SHIFT	8
#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
#define	SBIPS_INT3_SHIFT	16
#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
#define	SBIPS_INT4_SHIFT	24

/* sbtpsflag */
#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */

/* sbtmerrlog */
#define	SBTMEL_CM		0x00000007	/* command */
#define	SBTMEL_CI		0x0000ff00	/* connection id */
#define	SBTMEL_EC		0x0f000000	/* error code */
#define	SBTMEL_ME		0x80000000	/* multiple error */

/* sbimstate */
#define	SBIM_PC			0xf		/* pipecount */
#define	SBIM_AP_MASK		0x30		/* arbitration policy */
#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
#define	SBIM_AP_TS		0x10		/* use timesliaces only */
#define	SBIM_AP_TK		0x20		/* use token only */
#define	SBIM_AP_RSV		0x30		/* reserved */
#define	SBIM_IBE		0x20000		/* inbanderror */
#define	SBIM_TO			0x40000		/* timeout */
#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */

/* sbtmstatelow */
#define	SBTML_RESET		0x1		/* reset */
#define	SBTML_REJ_MASK		0x6		/* reject */
#define	SBTML_REJ_SHIFT		1
#define	SBTML_CLK		0x10000		/* clock enable */
#define	SBTML_FGC		0x20000		/* force gated clocks on */
#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
#define	SBTML_PE		0x40000000	/* pme enable */
#define	SBTML_BE		0x80000000	/* bist enable */

/* sbtmstatehigh */
#define	SBTMH_SERR		0x1		/* serror */
#define	SBTMH_INT		0x2		/* interrupt */
#define	SBTMH_BUSY		0x4		/* busy */
#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
#define	SBTMH_FL_MASK		0x0fff0000	/* core-specific flags */
#define SBTMH_DMA64		0x10000000      /* supports DMA with 64-bit addresses */
#define	SBTMH_GCR		0x20000000	/* gated clock request */
#define	SBTMH_BISTF		0x40000000	/* bist failed */
#define	SBTMH_BISTD		0x80000000	/* bist done */


/* sbbwa0 */
#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
#define	SBBWA_TAB1_SHIFT	16

/* sbimconfiglow */
#define	SBIMCL_STO_MASK		0x7		/* service timeout */
#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
#define	SBIMCL_RTO_SHIFT	4
#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
#define	SBIMCL_CID_SHIFT	16

/* sbimconfighigh */
#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
#define	SBIMCH_TEM_SHIFT	4
#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
#define	SBIMCH_BEM_SHIFT	6

/* sbadmatch0 */
#define	SBAM_TYPE_MASK		0x3		/* address type */
#define	SBAM_AD64		0x4		/* reserved */
#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
#define	SBAM_ADINT0_SHIFT	3
#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
#define	SBAM_ADINT1_SHIFT	3
#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
#define	SBAM_ADINT2_SHIFT	3
#define	SBAM_ADEN		0x400		/* enable */
#define	SBAM_ADNEG		0x800		/* negative decode */
#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
#define	SBAM_BASE0_SHIFT	8
#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
#define	SBAM_BASE1_SHIFT	12
#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
#define	SBAM_BASE2_SHIFT	16

/* sbtmconfiglow */
#define	SBTMCL_CD_MASK		0xff		/* clock divide */
#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
#define	SBTMCL_CO_SHIFT		11
#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
#define	SBTMCL_IF_SHIFT		18
#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
#define	SBTMCL_IM_SHIFT		24

/* sbtmconfighigh */
#define	SBTMCH_BM_MASK		0x3		/* busy mode */
#define	SBTMCH_RM_MASK		0x3		/* retry mode */
#define	SBTMCH_RM_SHIFT		2
#define	SBTMCH_SM_MASK		0x30		/* stop mode */
#define	SBTMCH_SM_SHIFT		4
#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
#define	SBTMCH_EM_SHIFT		8
#define	SBTMCH_IM_MASK		0xc00		/* int mode */
#define	SBTMCH_IM_SHIFT		10

/* sbbconfig */
#define	SBBC_LAT_MASK		0x3		/* sb latency */
#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
#define	SBBC_MAX0_SHIFT		16
#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
#define	SBBC_MAX1_SHIFT		20

/* sbbstate */
#define	SBBS_SRD		0x1		/* st reg disable */
#define	SBBS_HRD		0x2		/* hold reg disable */

/* sbidlow */
#define	SBIDL_CS_MASK		0x3		/* config space */
#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
#define	SBIDL_AR_SHIFT		3
#define	SBIDL_SYNCH		0x40		/* sync */
#define	SBIDL_INIT		0x80		/* initiator */
#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
#define	SBIDL_MINLAT_SHIFT	8
#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
#define	SBIDL_MAXLAT_SHIFT	12
#define	SBIDL_FIRST		0x10000		/* this initiator is first */
#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
#define	SBIDL_CW_SHIFT		18
#define	SBIDL_TP_MASK		0xf00000	/* target ports */
#define	SBIDL_TP_SHIFT		20
#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
#define	SBIDL_IP_SHIFT		24
#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
#define	SBIDL_RV_SHIFT		28
#define	SBIDL_RV_2_2		0x00000000	/* version 2.2 or earlier */
#define	SBIDL_RV_2_3		0x10000000	/* version 2.3 */

/* sbidhigh */
#define	SBIDH_RC_MASK		0x000f		/* revision code */
#define	SBIDH_RCE_MASK		0x7000		/* revision code extension field */
#define	SBIDH_RCE_SHIFT		8
#define	SBCOREREV(sbidh) \
	((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
#define	SBIDH_CC_MASK		0x8ff0		/* core code */
#define	SBIDH_CC_SHIFT		4
#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
#define	SBIDH_VC_SHIFT		16

#define	SB_COMMIT		0xfd8		/* update buffered registers value */

/* vendor codes */
#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */

/* core codes */
#define	SB_NODEV		0x700		/* Invalid coreid */
#define	SB_CC			0x800		/* chipcommon core */
#define	SB_ILINE20		0x801		/* iline20 core */
#define	SB_SDRAM		0x803		/* sdram core */
#define	SB_PCI			0x804		/* pci core */
#define	SB_MIPS			0x805		/* mips core */
#define	SB_ENET			0x806		/* enet mac core */
#define	SB_CODEC		0x807		/* v90 codec core */
#define	SB_USB			0x808		/* usb 1.1 host/device core */
#define	SB_ADSL			0x809		/* ADSL core */
#define	SB_ILINE100		0x80a		/* iline100 core */
#define	SB_IPSEC		0x80b		/* ipsec core */
#define	SB_PCMCIA		0x80d		/* pcmcia core */
#define	SB_SOCRAM		0x80e		/* internal memory core */
#define	SB_MEMC			0x80f		/* memc sdram core */
#define	SB_EXTIF		0x811		/* external interface core */
#define	SB_D11			0x812		/* 802.11 MAC core */
#define	SB_MIPS33		0x816		/* mips3302 core */
#define	SB_USB11H		0x817		/* usb 1.1 host core */
#define	SB_USB11D		0x818		/* usb 1.1 device core */
#define	SB_USB20H		0x819		/* usb 2.0 host core */
#define	SB_USB20D		0x81a		/* usb 2.0 device core */
#define	SB_SDIOH		0x81b		/* sdio host core */
#define	SB_ROBO			0x81c		/* roboswitch core */
#define	SB_ATA100		0x81d		/* parallel ATA core */
#define	SB_SATAXOR		0x81e		/* serial ATA & XOR DMA core */
#define	SB_GIGETH		0x81f		/* gigabit ethernet core */
#define	SB_PCIE			0x820		/* pci express core */
#define	SB_MIMO			0x821		/* MIMO phy core */
#define	SB_SRAMC		0x822		/* SRAM controller core */
#define	SB_MINIMAC		0x823		/* MINI MAC/phy core */
#define	SB_ARM7S		0x825		/* ARM7tdmi-s core */
#define SB_SDIOD		0x829		/* SDIO device core */
#define SB_ARMCM3		0x82a		/* ARM Cortex M3 core */
#define SB_OCP			0x830		/* OCP2OCP bridge core */
#define SB_SC			0x831		/* shared common core */
#define SB_AHB			0x832		/* OCP2AHB bridge core */

#define	SB_CC_IDX		0		/* chipc, when present, is always core 0 */

/* Not an enumeration space register, but common to all cores to
 * communicate w/PMU regarding Silicon Backplane clocking.
 */
#define SB_CLK_CTL_ST		0x1e0		/* clock control and status */

/* clk_ctl_st register */
#define	CCS_FORCEALP		0x00000001	/* force ALP request */
#define	CCS_FORCEHT		0x00000002	/* force HT request */
#define	CCS_FORCEILP		0x00000004	/* force ILP request */
#define	CCS_ALPAREQ		0x00000008	/* ALP Avail Request */
#define	CCS_HTAREQ		0x00000010	/* HT Avail Request */
#define	CCS_FORCEHWREQOFF	0x00000020	/* Force HW Clock Request Off */
#define	CCS_ALPAVAIL		0x00010000	/* ALP is available */
#define	CCS_HTAVAIL		0x00020000	/* HT is available */
#define	CCS0_HTAVAIL		0x00010000	/* HT avail in chipc and pcmcia on 4328a0 */
#define	CCS0_ALPAVAIL		0x00020000	/* ALP avail in chipc and pcmcia on 4328a0 */

/* Not really related to Silicon Backplane, but a couple of software
 * conventions for the use the flash space:
 */

/* Minumum amount of flash we support */
#define FLASH_MIN		0x00020000	/* Minimum flash size */

/* A boot/binary may have an embedded block that describes its size  */
#define	BISZ_OFFSET		0x3e0		/* At this offset into the binary */
#define	BISZ_MAGIC		0x4249535a	/* Marked with this value: 'BISZ' */
#define	BISZ_MAGIC_IDX		0		/* Word 0: magic */
#define	BISZ_TXTST_IDX		1		/*	1: text start */
#define	BISZ_TXTEND_IDX		2		/*	2: text end */
#define	BISZ_DATAST_IDX		3		/*	3: data start */
#define	BISZ_DATAEND_IDX	4		/*	4: data end */
#define	BISZ_BSSST_IDX		5		/*	5: bss start */
#define	BISZ_BSSEND_IDX		6		/*	6: bss end */
#define BISZ_SIZE		7		/* descriptor size in 32-bit intergers */

#endif	/* _SBCONFIG_H */