summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-4.1/0007-dmaengine-Add-support-for-BCM2708.patch
blob: 9f225878b6f8dbeeb6356908a49680eb2028b19d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
From 04a4ceef489437512b4d40071e049950d56fbb27 Mon Sep 17 00:00:00 2001
From: Florian Meier <florian.meier@koalo.de>
Date: Fri, 22 Nov 2013 14:22:53 +0100
Subject: [PATCH 007/171] dmaengine: Add support for BCM2708
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add support for DMA controller of BCM2708 as used in the Raspberry Pi.
Currently it only supports cyclic DMA.

Signed-off-by: Florian Meier <florian.meier@koalo.de>

dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels

DMA: fix cyclic LITE length overflow bug

dmaengine: bcm2708: Remove chancnt affectations

Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d:
chancnt is already filled by dma_async_device_register, which uses the channel
list to know how much channels there is.

Since it's already filled, we can safely remove it from the drivers' probe
function.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dmaengine: bcm2708: overwrite dreq only if it is not set

dreq is set when the DMA channel is fetched from Device Tree.
slave_id is set using dmaengine_slave_config().
Only overwrite dreq with slave_id if it is not set.

dreq/slave_id in the cyclic DMA case is not touched, because I don't
have hardware to test with.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dmaengine: bcm2708: do device registration in the board file

Don't register the device in the driver. Do it in the board file.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835

Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
Add Device Tree support to the non ARCH_BCM2835 case.
Use the same driver name regardless of architecture.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

BCM270x_DT: add bcm2835-dma entry

Add Device Tree entry for bcm2835-dma.
The entry doesn't contain any resources since they are handled
by the arch/arm/mach-bcm270x/dma.c driver.
In non-DT mode, don't add the device in the board file.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

bcm2708-dmaengine: Add debug options

BCM270x: Add memory and irq resources to dmaengine device and DT

Prepare for merging of the legacy DMA API arch driver dma.c
with bcm2708-dmaengine by adding memory and irq resources both
to platform file device and Device Tree node.
Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c

Merge the legacy DMA API driver with bcm2708-dmaengine.
This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox
driver is also needed).

Changes to the dma.c code:
- Use BIT() macro.
- Cutdown some comments to one line.
- Add mutex to vc_dmaman and use this, since the dev lock is locked
  during probing of the engine part.
- Add global g_dmaman variable since drvdata is used by the engine part.
- Restructure for readability:
  vc_dmaman_chan_alloc()
  vc_dmaman_chan_free()
  bcm_dma_chan_free()
- Restructure bcm_dma_chan_alloc() to simplify error handling.
- Use device irq resources instead of hardcoded bcm_dma_irqs table.
- Remove dev_dmaman_register() and code it directly.
- Remove dev_dmaman_deregister() and code it directly.
- Simplify bcm_dmaman_probe() using devm_* functions.
- Get dmachans from DT if available.
- Keep 'dma.dmachans' module argument name for backwards compatibility.

Make it available on ARCH_BCM2835 as well.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

dmaengine: bcm2708: set residue_granularity field

bcm2708-dmaengine supports residue reporting at burst level
but didn't report this via the residue_granularity field.

Without this field set properly we get playback issues with I2S cards.
---
 arch/arm/mach-bcm2708/bcm2708.c           |   68 ++
 arch/arm/mach-bcm2709/bcm2709.c           |   68 ++
 drivers/dma/Kconfig                       |   13 +-
 drivers/dma/Makefile                      |    1 +
 drivers/dma/bcm2708-dmaengine.c           | 1298 +++++++++++++++++++++++++++++
 include/linux/platform_data/dma-bcm2708.h |  127 +++
 6 files changed, 1574 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/bcm2708-dmaengine.c
 create mode 100644 include/linux/platform_data/dma-bcm2708.h

--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -234,6 +234,73 @@ static struct amba_device *amba_devs[] _
 	&uart0_device,
 };
 
+static struct resource bcm2708_dmaengine_resources[] = {
+	{
+		.start = DMA_BASE,
+		.end = DMA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_DMA0,
+		.end = IRQ_DMA0,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA1,
+		.end = IRQ_DMA1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA2,
+		.end = IRQ_DMA2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA3,
+		.end = IRQ_DMA3,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA4,
+		.end = IRQ_DMA4,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA5,
+		.end = IRQ_DMA5,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA6,
+		.end = IRQ_DMA6,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA7,
+		.end = IRQ_DMA7,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA8,
+		.end = IRQ_DMA8,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA9,
+		.end = IRQ_DMA9,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA10,
+		.end = IRQ_DMA10,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA11,
+		.end = IRQ_DMA11,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA12,
+		.end = IRQ_DMA12,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device bcm2708_dmaengine_device = {
+	.name = "bcm2708-dmaengine",
+	.id = -1,
+	.resource = bcm2708_dmaengine_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_dmaengine_resources),
+};
+
 static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
 
 static struct platform_device bcm2708_fb_device = {
@@ -463,6 +530,7 @@ void __init bcm2708_init(void)
 	bcm2708_init_clocks();
 	bcm2708_dt_init();
 
+	bcm_register_device_dt(&bcm2708_dmaengine_device);
 	bcm_register_device(&bcm2708_vcio_device);
 #ifdef CONFIG_BCM2708_GPIO
 	bcm_register_device_dt(&bcm2708_gpio_device);
--- a/arch/arm/mach-bcm2709/bcm2709.c
+++ b/arch/arm/mach-bcm2709/bcm2709.c
@@ -244,6 +244,73 @@ static struct amba_device *amba_devs[] _
 	&uart0_device,
 };
 
+static struct resource bcm2708_dmaengine_resources[] = {
+	{
+		.start = DMA_BASE,
+		.end = DMA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_DMA0,
+		.end = IRQ_DMA0,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA1,
+		.end = IRQ_DMA1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA2,
+		.end = IRQ_DMA2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA3,
+		.end = IRQ_DMA3,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA4,
+		.end = IRQ_DMA4,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA5,
+		.end = IRQ_DMA5,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA6,
+		.end = IRQ_DMA6,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA7,
+		.end = IRQ_DMA7,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA8,
+		.end = IRQ_DMA8,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA9,
+		.end = IRQ_DMA9,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA10,
+		.end = IRQ_DMA10,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA11,
+		.end = IRQ_DMA11,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DMA12,
+		.end = IRQ_DMA12,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device bcm2708_dmaengine_device = {
+	.name = "bcm2708-dmaengine",
+	.id = -1,
+	.resource = bcm2708_dmaengine_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_dmaengine_resources),
+};
+
 static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
 
 static struct platform_device bcm2708_fb_device = {
@@ -483,6 +550,7 @@ void __init bcm2709_init(void)
 	bcm2709_init_clocks();
 	bcm2709_dt_init();
 
+	bcm_register_device_dt(&bcm2708_dmaengine_device);
 	bcm_register_device(&bcm2708_vcio_device);
 #ifdef CONFIG_BCM2708_GPIO
 	bcm_register_device_dt(&bcm2708_gpio_device);
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -337,6 +337,17 @@ config DMA_BCM2835
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 
+config DMA_BCM2708
+	tristate "BCM2708 DMA engine support"
+	depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+
+config DMA_BCM2708_LEGACY
+	bool "BCM2708 DMA legacy API support"
+	depends on DMA_BCM2708
+	default y
+
 config TI_CPPI41
 	tristate "AM33xx CPPI41 DMA support"
 	depends on ARCH_OMAP
@@ -385,7 +396,7 @@ config MOXART_DMA
 	select DMA_VIRTUAL_CHANNELS
 	help
 	  Enable support for the MOXA ART SoC DMA controller.
- 
+
 config FSL_EDMA
 	tristate "Freescale eDMA engine support"
 	depends on OF
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
 obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_DMA_OMAP) += omap-dma.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
+obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
 obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
--- /dev/null
+++ b/drivers/dma/bcm2708-dmaengine.c
@@ -0,0 +1,1298 @@
+/*
+ * BCM2835 DMA engine support
+ *
+ * This driver supports cyclic and scatter/gather DMA transfers.
+ *
+ * Author:      Florian Meier <florian.meier@koalo.de>
+ *              Gellert Weisz <gellert@raspberrypi.org>
+ *              Copyright 2013-2014
+ *
+ * Based on
+ *	OMAP DMAengine support by Russell King
+ *
+ *	BCM2708 DMA Driver
+ *	Copyright (C) 2010 Broadcom
+ *
+ *	Raspberry Pi PCM I2S ALSA Driver
+ *	Copyright (c) by Phil Poole 2013
+ *
+ *	MARVELL MMP Peripheral DMA Driver
+ *	Copyright 2012 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_data/dma-bcm2708.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+
+#include "virt-dma.h"
+
+static unsigned dma_debug;
+
+/*
+ * Legacy DMA API
+ */
+
+#ifdef CONFIG_DMA_BCM2708_LEGACY
+
+#define CACHE_LINE_MASK 31
+#define DEFAULT_DMACHAN_BITMAP 0x10  /* channel 4 only */
+
+/* valid only for channels 0 - 14, 15 has its own base address */
+#define BCM2708_DMA_CHAN(n)	((n) << 8) /* base address */
+#define BCM2708_DMA_CHANIO(dma_base, n) \
+	((void __iomem *)((char *)(dma_base) + BCM2708_DMA_CHAN(n)))
+
+struct vc_dmaman {
+	void __iomem *dma_base;
+	u32 chan_available; /* bitmap of available channels */
+	u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */
+	struct mutex lock;
+};
+
+static struct device *dmaman_dev;	/* we assume there's only one! */
+static struct vc_dmaman *g_dmaman;	/* DMA manager */
+static int dmachans = -1;		/* module parameter */
+
+/* DMA Auxiliary Functions */
+
+/* A DMA buffer on an arbitrary boundary may separate a cache line into a
+   section inside the DMA buffer and another section outside it.
+   Even if we flush DMA buffers from the cache there is always the chance that
+   during a DMA someone will access the part of a cache line that is outside
+   the DMA buffer - which will then bring in unwelcome data.
+   Without being able to dictate our own buffer pools we must insist that
+   DMA buffers consist of a whole number of cache lines.
+*/
+extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len)
+{
+	int i;
+
+	for (i = 0; i < sg_len; i++) {
+		if (sg_ptr[i].offset & CACHE_LINE_MASK ||
+		    sg_ptr[i].length & CACHE_LINE_MASK)
+			return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma);
+
+extern void bcm_dma_start(void __iomem *dma_chan_base,
+			  dma_addr_t control_block)
+{
+	dsb();	/* ARM data synchronization (push) operation */
+
+	writel(control_block, dma_chan_base + BCM2708_DMA_ADDR);
+	writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS);
+}
+EXPORT_SYMBOL_GPL(bcm_dma_start);
+
+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base)
+{
+	dsb();
+
+	/* ugly busy wait only option for now */
+	while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE)
+		cpu_relax();
+}
+EXPORT_SYMBOL_GPL(bcm_dma_wait_idle);
+
+extern bool bcm_dma_is_busy(void __iomem *dma_chan_base)
+{
+	dsb();
+
+	return readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_is_busy);
+
+/* Complete an ongoing DMA (assuming its results are to be ignored)
+   Does nothing if there is no DMA in progress.
+   This routine waits for the current AXI transfer to complete before
+   terminating the current DMA. If the current transfer is hung on a DREQ used
+   by an uncooperative peripheral the AXI transfer may never complete.	In this
+   case the routine times out and return a non-zero error code.
+   Use of this routine doesn't guarantee that the ongoing or aborted DMA
+   does not produce an interrupt.
+*/
+extern int bcm_dma_abort(void __iomem *dma_chan_base)
+{
+	unsigned long int cs;
+	int rc = 0;
+
+	cs = readl(dma_chan_base + BCM2708_DMA_CS);
+
+	if (BCM2708_DMA_ACTIVE & cs) {
+		long int timeout = 10000;
+
+		/* write 0 to the active bit - pause the DMA */
+		writel(0, dma_chan_base + BCM2708_DMA_CS);
+
+		/* wait for any current AXI transfer to complete */
+		while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0)
+			cs = readl(dma_chan_base + BCM2708_DMA_CS);
+
+		if (0 != (cs & BCM2708_DMA_ISPAUSED)) {
+			/* we'll un-pause when we set of our next DMA */
+			rc = -ETIMEDOUT;
+
+		} else if (BCM2708_DMA_ACTIVE & cs) {
+			/* terminate the control block chain */
+			writel(0, dma_chan_base + BCM2708_DMA_NEXTCB);
+
+			/* abort the whole DMA */
+			writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE,
+			       dma_chan_base + BCM2708_DMA_CS);
+		}
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_abort);
+
+ /* DMA Manager Device Methods */
+
+static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base,
+			   u32 chans_available)
+{
+	dmaman->dma_base = dma_base;
+	dmaman->chan_available = chans_available;
+	dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c;  /* 2 & 3 */
+	dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01;  /* 0 */
+	dmaman->has_feature[BCM_DMA_FEATURE_NORMAL_ORD] = 0xfe;  /* 1 to 7 */
+	dmaman->has_feature[BCM_DMA_FEATURE_LITE_ORD] = 0x7f00;  /* 8 to 14 */
+}
+
+static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman,
+				unsigned preferred_feature_set)
+{
+	u32 chans;
+	int chan = 0;
+	int feature;
+
+	chans = dmaman->chan_available;
+	for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++)
+		/* select the subset of available channels with the desired
+		   feature so long as some of the candidate channels have that
+		   feature */
+		if ((preferred_feature_set & (1 << feature)) &&
+		    (chans & dmaman->has_feature[feature]))
+			chans &= dmaman->has_feature[feature];
+
+	if (!chans)
+		return -ENOENT;
+
+	/* return the ordinal of the first channel in the bitmap */
+	while (chans != 0 && (chans & 1) == 0) {
+		chans >>= 1;
+		chan++;
+	}
+	/* claim the channel */
+	dmaman->chan_available &= ~(1 << chan);
+
+	return chan;
+}
+
+static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan)
+{
+	if (chan < 0)
+		return -EINVAL;
+
+	if ((1 << chan) & dmaman->chan_available)
+		return -EIDRM;
+
+	dmaman->chan_available |= (1 << chan);
+
+	return 0;
+}
+
+/* DMA Manager Monitor */
+
+extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
+			      void __iomem **out_dma_base, int *out_dma_irq)
+{
+	struct vc_dmaman *dmaman = g_dmaman;
+	struct platform_device *pdev = to_platform_device(dmaman_dev);
+	struct resource *r;
+	int chan;
+
+	if (!dmaman_dev)
+		return -ENODEV;
+
+	mutex_lock(&dmaman->lock);
+	chan = vc_dmaman_chan_alloc(dmaman, preferred_feature_set);
+	if (chan < 0)
+		goto out;
+
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, (unsigned int)chan);
+	if (!r) {
+		dev_err(dmaman_dev, "failed to get irq for DMA channel %d\n",
+			chan);
+		vc_dmaman_chan_free(dmaman, chan);
+		chan = -ENOENT;
+		goto out;
+	}
+
+	*out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, chan);
+	*out_dma_irq = r->start;
+	dev_dbg(dmaman_dev,
+		"Legacy API allocated channel=%d, base=%p, irq=%i\n",
+		chan, *out_dma_base, *out_dma_irq);
+
+out:
+	mutex_unlock(&dmaman->lock);
+
+	return chan;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc);
+
+extern int bcm_dma_chan_free(int channel)
+{
+	struct vc_dmaman *dmaman = g_dmaman;
+	int rc;
+
+	if (!dmaman_dev)
+		return -ENODEV;
+
+	mutex_lock(&dmaman->lock);
+	rc = vc_dmaman_chan_free(dmaman, channel);
+	mutex_unlock(&dmaman->lock);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_chan_free);
+
+static int bcm_dmaman_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct vc_dmaman *dmaman;
+	struct resource *r;
+	void __iomem *dma_base;
+	uint32_t val;
+
+	if (!of_property_read_u32(dev->of_node,
+				  "brcm,dma-channel-mask", &val))
+		dmachans = val;
+	else if (dmachans == -1)
+		dmachans = DEFAULT_DMACHAN_BITMAP;
+
+	dmaman = devm_kzalloc(dev, sizeof(*dmaman), GFP_KERNEL);
+	if (!dmaman)
+		return -ENOMEM;
+
+	mutex_init(&dmaman->lock);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dma_base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(dma_base))
+		return PTR_ERR(dma_base);
+
+	vc_dmaman_init(dmaman, dma_base, dmachans);
+	g_dmaman = dmaman;
+	dmaman_dev = dev;
+
+	dev_info(dev, "DMA legacy API manager at %p, dmachans=0x%x\n",
+		 dma_base, dmachans);
+
+	return 0;
+}
+
+static int bcm_dmaman_remove(struct platform_device *pdev)
+{
+	dmaman_dev = NULL;
+
+	return 0;
+}
+
+#else /* CONFIG_DMA_BCM2708_LEGACY */
+
+static int bcm_dmaman_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_DMA_BCM2708_LEGACY */
+
+/*
+ * DMA engine
+ */
+
+struct bcm2835_dmadev {
+	struct dma_device ddev;
+	spinlock_t lock;
+	void __iomem *base;
+	struct device_dma_parameters dma_parms;
+};
+
+struct bcm2835_dma_cb {
+	uint32_t info;
+	uint32_t src;
+	uint32_t dst;
+	uint32_t length;
+	uint32_t stride;
+	uint32_t next;
+	uint32_t pad[2];
+};
+
+struct bcm2835_chan {
+	struct virt_dma_chan vc;
+	struct list_head node;
+
+	struct dma_slave_config	cfg;
+	bool cyclic;
+
+	int ch;
+	struct bcm2835_desc *desc;
+
+	void __iomem *chan_base;
+	int irq_number;
+
+	unsigned int dreq;
+};
+
+struct bcm2835_desc {
+	struct virt_dma_desc vd;
+	enum dma_transfer_direction dir;
+
+	unsigned int control_block_size;
+	struct bcm2835_dma_cb *control_block_base;
+	dma_addr_t control_block_base_phys;
+
+	unsigned int frames;
+	size_t size;
+};
+
+#define BCM2835_DMA_CS		0x00
+#define BCM2835_DMA_ADDR	0x04
+#define BCM2835_DMA_SOURCE_AD	0x0c
+#define BCM2835_DMA_DEST_AD	0x10
+#define BCM2835_DMA_NEXTCB	0x1C
+
+/* DMA CS Control and Status bits */
+#define BCM2835_DMA_ACTIVE	BIT(0)
+#define BCM2835_DMA_INT	BIT(2)
+#define BCM2835_DMA_ISPAUSED	BIT(4)  /* Pause requested or not active */
+#define BCM2835_DMA_ISHELD	BIT(5)  /* Is held by DREQ flow control */
+#define BCM2835_DMA_ERR	BIT(8)
+#define BCM2835_DMA_ABORT	BIT(30) /* Stop current CB, go to next, WO */
+#define BCM2835_DMA_RESET	BIT(31) /* WO, self clearing */
+
+#define BCM2835_DMA_INT_EN	BIT(0)
+#define BCM2835_DMA_WAIT_RESP	BIT(3)
+#define BCM2835_DMA_D_INC	BIT(4)
+#define BCM2835_DMA_D_WIDTH	BIT(5)
+#define BCM2835_DMA_D_DREQ	BIT(6)
+#define BCM2835_DMA_S_INC	BIT(8)
+#define BCM2835_DMA_S_WIDTH	BIT(9)
+#define BCM2835_DMA_S_DREQ	BIT(10)
+
+#define BCM2835_DMA_PER_MAP(x)	((x) << 16)
+#define	BCM2835_DMA_WAITS(x)	(((x)&0x1f) << 21)
+
+#define SDHCI_BCM_DMA_WAITS 0  /* delays slowing DMA transfers: 0-31 */
+
+#define BCM2835_DMA_DATA_TYPE_S8	1
+#define BCM2835_DMA_DATA_TYPE_S16	2
+#define BCM2835_DMA_DATA_TYPE_S32	4
+#define BCM2835_DMA_DATA_TYPE_S128	16
+
+#define BCM2835_DMA_BULK_MASK	BIT(0)
+#define BCM2835_DMA_FIQ_MASK	(BIT(2) | BIT(3))
+
+
+/* Valid only for channels 0 - 14, 15 has its own base address */
+#define BCM2835_DMA_CHAN(n)	((n) << 8) /* Base address */
+#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
+
+#define MAX_LITE_TRANSFER 32768
+#define MAX_NORMAL_TRANSFER 1073741824
+
+static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d)
+{
+	return container_of(d, struct bcm2835_dmadev, ddev);
+}
+
+static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c)
+{
+	return container_of(c, struct bcm2835_chan, vc.chan);
+}
+
+static inline struct bcm2835_desc *to_bcm2835_dma_desc(
+		struct dma_async_tx_descriptor *t)
+{
+	return container_of(t, struct bcm2835_desc, vd.tx);
+}
+
+static void dma_dumpregs(struct bcm2835_chan *c)
+{
+	pr_debug("-------------DMA DUMPREGS-------------\n");
+	pr_debug("CS=			%u\n",
+		readl(c->chan_base + BCM2835_DMA_CS));
+	pr_debug("ADDR=			%u\n",
+		readl(c->chan_base + BCM2835_DMA_ADDR));
+	pr_debug("SOURCE_ADDR=	%u\n",
+		readl(c->chan_base + BCM2835_DMA_SOURCE_AD));
+	pr_debug("DEST_AD=		%u\n",
+		readl(c->chan_base + BCM2835_DMA_DEST_AD));
+	pr_debug("NEXTCB=			%u\n",
+		readl(c->chan_base + BCM2835_DMA_NEXTCB));
+	pr_debug("--------------------------------------\n");
+}
+
+static void bcm2835_dma_desc_free(struct virt_dma_desc *vd)
+{
+	struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd);
+	dma_free_coherent(desc->vd.tx.chan->device->dev,
+			desc->control_block_size,
+			desc->control_block_base,
+			desc->control_block_base_phys);
+	kfree(desc);
+}
+
+static int bcm2835_dma_abort(void __iomem *chan_base)
+{
+	unsigned long cs;
+	long int timeout = 10000;
+
+	cs = readl(chan_base + BCM2835_DMA_CS);
+	if (!(cs & BCM2835_DMA_ACTIVE))
+		return 0;
+
+	/* Write 0 to the active bit - Pause the DMA */
+	writel(0, chan_base + BCM2835_DMA_CS);
+
+	/* Wait for any current AXI transfer to complete */
+	while ((cs & BCM2835_DMA_ISPAUSED) && --timeout) {
+		cpu_relax();
+		cs = readl(chan_base + BCM2835_DMA_CS);
+	}
+
+	/* We'll un-pause when we set of our next DMA */
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	if (!(cs & BCM2835_DMA_ACTIVE))
+		return 0;
+
+	/* Terminate the control block chain */
+	writel(0, chan_base + BCM2835_DMA_NEXTCB);
+
+	/* Abort the whole DMA */
+	writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE,
+	       chan_base + BCM2835_DMA_CS);
+
+	return 0;
+}
+
+
+static void bcm2835_dma_start_desc(struct bcm2835_chan *c)
+{
+	struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
+	struct bcm2835_desc *d;
+
+	if (!vd) {
+		c->desc = NULL;
+		return;
+	}
+
+	list_del(&vd->node);
+
+	c->desc = d = to_bcm2835_dma_desc(&vd->tx);
+
+	writel(d->control_block_base_phys, c->chan_base + BCM2835_DMA_ADDR);
+	writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
+
+}
+
+static irqreturn_t bcm2835_dma_callback(int irq, void *data)
+{
+	struct bcm2835_chan *c = data;
+	struct bcm2835_desc *d;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->vc.lock, flags);
+
+	/* Acknowledge interrupt */
+	writel(BCM2835_DMA_INT, c->chan_base + BCM2835_DMA_CS);
+
+	d = c->desc;
+
+	if (d) {
+		if (c->cyclic) {
+			vchan_cyclic_callback(&d->vd);
+
+			/* Keep the DMA engine running */
+			writel(BCM2835_DMA_ACTIVE,
+				c->chan_base + BCM2835_DMA_CS);
+
+		} else {
+			vchan_cookie_complete(&c->desc->vd);
+			bcm2835_dma_start_desc(c);
+		}
+	}
+
+	spin_unlock_irqrestore(&c->vc.lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	int ret;
+
+	dev_dbg(c->vc.chan.device->dev,
+			"Allocating DMA channel %d\n", c->ch);
+
+	ret = request_irq(c->irq_number,
+			bcm2835_dma_callback, 0, "DMA IRQ", c);
+
+	return ret;
+}
+
+static void bcm2835_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+
+	vchan_free_chan_resources(&c->vc);
+	free_irq(c->irq_number, c);
+
+	dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch);
+}
+
+static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d)
+{
+	return d->size;
+}
+
+static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr)
+{
+	unsigned int i;
+	size_t size;
+
+	for (size = i = 0; i < d->frames; i++) {
+		struct bcm2835_dma_cb *control_block =
+			&d->control_block_base[i];
+		size_t this_size = control_block->length;
+		dma_addr_t dma;
+
+		if (d->dir == DMA_DEV_TO_MEM)
+			dma = control_block->dst;
+		else
+			dma = control_block->src;
+
+		if (size)
+			size += this_size;
+		else if (addr >= dma && addr < dma + this_size)
+			size += dma + this_size - addr;
+	}
+
+	return size;
+}
+
+static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan,
+	dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	struct bcm2835_desc *d;
+	struct virt_dma_desc *vd;
+	enum dma_status ret;
+	unsigned long flags;
+	dma_addr_t pos;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE || !txstate)
+		return ret;
+
+	spin_lock_irqsave(&c->vc.lock, flags);
+	vd = vchan_find_desc(&c->vc, cookie);
+	if (vd) {
+		txstate->residue =
+			bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx));
+	} else if (c->desc && c->desc->vd.tx.cookie == cookie) {
+		d = c->desc;
+
+		if (d->dir == DMA_MEM_TO_DEV)
+			pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD);
+		else if (d->dir == DMA_DEV_TO_MEM)
+			pos = readl(c->chan_base + BCM2835_DMA_DEST_AD);
+		else
+			pos = 0;
+
+		txstate->residue = bcm2835_dma_desc_size_pos(d, pos);
+	} else {
+		txstate->residue = 0;
+	}
+
+	spin_unlock_irqrestore(&c->vc.lock, flags);
+
+	return ret;
+}
+
+static void bcm2835_dma_issue_pending(struct dma_chan *chan)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->vc.lock, flags);
+	if (vchan_issue_pending(&c->vc) && !c->desc)
+		bcm2835_dma_start_desc(c);
+
+	spin_unlock_irqrestore(&c->vc.lock, flags);
+}
+
+static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
+	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+	size_t period_len, enum dma_transfer_direction direction,
+	unsigned long flags)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	enum dma_slave_buswidth dev_width;
+	struct bcm2835_desc *d;
+	dma_addr_t dev_addr;
+	unsigned int es, sync_type;
+	unsigned int frame, max_size;
+
+	/* Grab configuration */
+	if (!is_slave_direction(direction)) {
+		dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
+		return NULL;
+	}
+
+	if (direction == DMA_DEV_TO_MEM) {
+		dev_addr = c->cfg.src_addr;
+		dev_width = c->cfg.src_addr_width;
+		sync_type = BCM2835_DMA_S_DREQ;
+	} else {
+		dev_addr = c->cfg.dst_addr;
+		dev_width = c->cfg.dst_addr_width;
+		sync_type = BCM2835_DMA_D_DREQ;
+	}
+
+	/* Bus width translates to the element size (ES) */
+	switch (dev_width) {
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		es = BCM2835_DMA_DATA_TYPE_S32;
+		break;
+	default:
+		return NULL;
+	}
+
+	/* Now allocate and setup the descriptor. */
+	d = kzalloc(sizeof(*d), GFP_NOWAIT);
+	if (!d)
+		return NULL;
+
+	d->dir = direction;
+
+	if (c->ch >= 8) /* we have a LITE channel */
+		max_size = MAX_LITE_TRANSFER;
+	else
+		max_size = MAX_NORMAL_TRANSFER;
+	period_len = min(period_len, max_size);
+
+	d->frames = (buf_len-1) / period_len + 1;
+
+	/* Allocate memory for control blocks */
+	d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb);
+	d->control_block_base = dma_zalloc_coherent(chan->device->dev,
+			d->control_block_size, &d->control_block_base_phys,
+			GFP_NOWAIT);
+
+	if (!d->control_block_base) {
+		kfree(d);
+		return NULL;
+	}
+
+	/*
+	 * Iterate over all frames, create a control block
+	 * for each frame and link them together.
+	 */
+	for (frame = 0; frame < d->frames; frame++) {
+		struct bcm2835_dma_cb *control_block =
+			&d->control_block_base[frame];
+
+		/* Setup adresses */
+		if (d->dir == DMA_DEV_TO_MEM) {
+			control_block->info = BCM2835_DMA_D_INC;
+			control_block->src = dev_addr;
+			control_block->dst = buf_addr + frame * period_len;
+		} else {
+			control_block->info = BCM2835_DMA_S_INC;
+			control_block->src = buf_addr + frame * period_len;
+			control_block->dst = dev_addr;
+		}
+
+		/* Enable interrupt */
+		control_block->info |= BCM2835_DMA_INT_EN;
+
+		/* Setup synchronization */
+		if (sync_type != 0)
+			control_block->info |= sync_type;
+
+		/* Setup DREQ channel */
+		if (c->cfg.slave_id != 0)
+			control_block->info |=
+				BCM2835_DMA_PER_MAP(c->cfg.slave_id);
+
+		/* Length of a frame */
+		if (frame != d->frames-1)
+			control_block->length = period_len;
+		else
+			control_block->length = buf_len - (d->frames - 1) * period_len;
+
+		d->size += control_block->length;
+
+		/*
+		 * Next block is the next frame.
+		 * This function is called on cyclic DMA transfers.
+		 * Therefore, wrap around at number of frames.
+		 */
+		control_block->next = d->control_block_base_phys +
+			sizeof(struct bcm2835_dma_cb)
+			* ((frame + 1) % d->frames);
+	}
+
+	c->cyclic = true;
+
+	return vchan_tx_prep(&c->vc, &d->vd, flags);
+}
+
+
+static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sgl,
+	unsigned int sg_len, enum dma_transfer_direction direction,
+	unsigned long flags, void *context)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	enum dma_slave_buswidth dev_width;
+	struct bcm2835_desc *d;
+	dma_addr_t dev_addr;
+	struct scatterlist *sgent;
+	unsigned int es, sync_type;
+	unsigned int i, j, splitct, max_size;
+
+	if (!is_slave_direction(direction)) {
+		dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
+		return NULL;
+	}
+
+	if (direction == DMA_DEV_TO_MEM) {
+		dev_addr = c->cfg.src_addr;
+		dev_width = c->cfg.src_addr_width;
+		sync_type = BCM2835_DMA_S_DREQ;
+	} else {
+		dev_addr = c->cfg.dst_addr;
+		dev_width = c->cfg.dst_addr_width;
+		sync_type = BCM2835_DMA_D_DREQ;
+	}
+
+	/* Bus width translates to the element size (ES) */
+	switch (dev_width) {
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		es = BCM2835_DMA_DATA_TYPE_S32;
+		break;
+	default:
+		return NULL;
+	}
+
+	/* Now allocate and setup the descriptor. */
+	d = kzalloc(sizeof(*d), GFP_NOWAIT);
+	if (!d)
+		return NULL;
+
+	d->dir = direction;
+
+	if (c->ch >= 8) /* we have a LITE channel */
+		max_size = MAX_LITE_TRANSFER;
+	else
+		max_size = MAX_NORMAL_TRANSFER;
+
+	/* We store the length of the SG list in d->frames
+	   taking care to account for splitting up transfers
+	   too large for a LITE channel */
+
+	d->frames = 0;
+	for_each_sg(sgl, sgent, sg_len, i) {
+		uint32_t len = sg_dma_len(sgent);
+		d->frames += 1 + len / max_size;
+	}
+
+	/* Allocate memory for control blocks */
+	d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb);
+	d->control_block_base = dma_zalloc_coherent(chan->device->dev,
+			d->control_block_size, &d->control_block_base_phys,
+			GFP_NOWAIT);
+
+	if (!d->control_block_base) {
+		kfree(d);
+		return NULL;
+	}
+
+	/*
+	 * Iterate over all SG entries, create a control block
+	 * for each frame and link them together.
+	 */
+
+	/* we count the number of times an SG entry had to be splitct
+	   as a result of using a LITE channel */
+	splitct = 0;
+
+	for_each_sg(sgl, sgent, sg_len, i) {
+		dma_addr_t addr = sg_dma_address(sgent);
+		uint32_t len = sg_dma_len(sgent);
+
+		for (j = 0; j < len; j += max_size) {
+			struct bcm2835_dma_cb *control_block =
+				&d->control_block_base[i+splitct];
+
+			/* Setup adresses */
+			if (d->dir == DMA_DEV_TO_MEM) {
+				control_block->info = BCM2835_DMA_D_INC |
+					BCM2835_DMA_D_WIDTH | BCM2835_DMA_S_DREQ;
+				control_block->src = dev_addr;
+				control_block->dst = addr + (dma_addr_t)j;
+			} else {
+				control_block->info = BCM2835_DMA_S_INC |
+					BCM2835_DMA_S_WIDTH | BCM2835_DMA_D_DREQ;
+				control_block->src = addr + (dma_addr_t)j;
+				control_block->dst = dev_addr;
+			}
+
+			/* Common part */
+			u32 waits = SDHCI_BCM_DMA_WAITS;
+			if ((dma_debug >> 0) & 0x1f)
+				waits = (dma_debug >> 0) & 0x1f;
+			control_block->info |= BCM2835_DMA_WAITS(waits);
+			control_block->info |= BCM2835_DMA_WAIT_RESP;
+
+			/* Enable  */
+			if (i == sg_len-1 && len-j <= max_size)
+				control_block->info |= BCM2835_DMA_INT_EN;
+
+			/* Setup synchronization */
+			if (sync_type != 0)
+				control_block->info |= sync_type;
+
+			/* Setup DREQ channel */
+			if (c->dreq != 0)
+				control_block->info |=
+					BCM2835_DMA_PER_MAP(c->dreq);
+
+			/* Length of a frame */
+			control_block->length = min(len-j, max_size);
+			d->size += control_block->length;
+
+			/*
+			 * Next block is the next frame.
+			 */
+			if (i < sg_len-1 || len-j > max_size) {
+				/* next block is the next frame. */
+				control_block->next = d->control_block_base_phys +
+				sizeof(struct bcm2835_dma_cb) * (i + splitct + 1);
+			} else {
+				/* next block is empty. */
+				control_block->next = 0;
+			}
+
+			if (len-j > max_size)
+				splitct++;
+		}
+	}
+
+	c->cyclic = false;
+
+	return vchan_tx_prep(&c->vc, &d->vd, flags);
+}
+
+static int bcm2835_dma_slave_config(struct dma_chan *chan,
+		struct dma_slave_config *cfg)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	if ((cfg->direction == DMA_DEV_TO_MEM &&
+	     cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
+	    (cfg->direction == DMA_MEM_TO_DEV &&
+	     cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
+	    !is_slave_direction(cfg->direction)) {
+		return -EINVAL;
+	}
+
+	c->cfg = *cfg;
+	if (!c->dreq)
+		c->dreq = cfg->slave_id;
+
+	return 0;
+}
+
+static int bcm2835_dma_terminate_all(struct dma_chan *chan)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device);
+	unsigned long flags;
+	int timeout = 10000;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&c->vc.lock, flags);
+
+	/* Prevent this channel being scheduled */
+	spin_lock(&d->lock);
+	list_del_init(&c->node);
+	spin_unlock(&d->lock);
+
+	/*
+	 * Stop DMA activity: we assume the callback will not be called
+	 * after bcm_dma_abort() returns (even if it does, it will see
+	 * c->desc is NULL and exit.)
+	 */
+	if (c->desc) {
+		c->desc = NULL;
+		bcm2835_dma_abort(c->chan_base);
+
+		/* Wait for stopping */
+		while (--timeout) {
+			if (!(readl(c->chan_base + BCM2835_DMA_CS) &
+						BCM2835_DMA_ACTIVE))
+				break;
+
+			cpu_relax();
+		}
+
+		if (!timeout)
+			dev_err(d->ddev.dev, "DMA transfer could not be terminated\n");
+	}
+
+	vchan_get_all_descriptors(&c->vc, &head);
+	spin_unlock_irqrestore(&c->vc.lock, flags);
+	vchan_dma_desc_free_list(&c->vc, &head);
+
+	return 0;
+}
+
+#ifndef CONFIG_DMA_BCM2708_LEGACY
+static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
+{
+	struct bcm2835_chan *c;
+
+	c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	c->vc.desc_free = bcm2835_dma_desc_free;
+	vchan_init(&c->vc, &d->ddev);
+	INIT_LIST_HEAD(&c->node);
+
+	c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id);
+	c->ch = chan_id;
+	c->irq_number = irq;
+
+	return 0;
+}
+#endif
+
+static int bcm2708_dma_chan_init(struct bcm2835_dmadev *d,
+	void __iomem *chan_base, int chan_id, int irq)
+{
+	struct bcm2835_chan *c;
+
+	c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	c->vc.desc_free = bcm2835_dma_desc_free;
+	vchan_init(&c->vc, &d->ddev);
+	INIT_LIST_HEAD(&c->node);
+
+	c->chan_base = chan_base;
+	c->ch = chan_id;
+	c->irq_number = irq;
+
+	return 0;
+}
+
+
+static void bcm2835_dma_free(struct bcm2835_dmadev *od)
+{
+	struct bcm2835_chan *c, *next;
+
+	list_for_each_entry_safe(c, next, &od->ddev.channels,
+				 vc.chan.device_node) {
+		list_del(&c->vc.chan.device_node);
+		tasklet_kill(&c->vc.task);
+	}
+}
+
+static const struct of_device_id bcm2835_dma_of_match[] = {
+	{ .compatible = "brcm,bcm2835-dma", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
+
+static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec,
+					   struct of_dma *ofdma)
+{
+	struct bcm2835_dmadev *d = ofdma->of_dma_data;
+	struct dma_chan *chan;
+
+	chan = dma_get_any_slave_channel(&d->ddev);
+	if (!chan)
+		return NULL;
+
+	/* Set DREQ from param */
+	to_bcm2835_dma_chan(chan)->dreq = spec->args[0];
+
+	return chan;
+}
+
+static int bcm2835_dma_probe(struct platform_device *pdev)
+{
+	struct bcm2835_dmadev *od;
+#ifndef CONFIG_DMA_BCM2708_LEGACY
+	struct resource *res;
+	void __iomem *base;
+	uint32_t chans_available;
+#endif
+	int rc;
+	int i;
+	int irq;
+
+
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+
+#ifdef CONFIG_DMA_BCM2708_LEGACY
+
+	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (rc)
+		return rc;
+	dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+
+
+	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return -ENOMEM;
+
+	rc = bcm_dmaman_probe(pdev);
+	if (rc)
+		return rc;
+
+	pdev->dev.dma_parms = &od->dma_parms;
+	dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
+
+
+	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
+	dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask);
+	dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
+	od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
+	od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
+	od->ddev.device_tx_status = bcm2835_dma_tx_status;
+	od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
+	od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
+	od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg;
+	od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
+	od->ddev.device_config = bcm2835_dma_slave_config;
+	od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	od->ddev.dev = &pdev->dev;
+	INIT_LIST_HEAD(&od->ddev.channels);
+	spin_lock_init(&od->lock);
+
+	platform_set_drvdata(pdev, od);
+
+	for (i = 0; i < 5; i++) {
+		void __iomem *chan_base;
+		int chan_id;
+
+		chan_id = bcm_dma_chan_alloc(BCM_DMA_FEATURE_LITE,
+			&chan_base,
+			&irq);
+
+		if (chan_id < 0)
+			break;
+
+		rc = bcm2708_dma_chan_init(od, chan_base, chan_id, irq);
+		if (rc)
+			goto err_no_dma;
+	}
+
+	if (pdev->dev.of_node) {
+		rc = of_dma_controller_register(pdev->dev.of_node,
+						bcm2835_dma_xlate, od);
+		if (rc) {
+			dev_err(&pdev->dev,
+				"Failed to register DMA controller\n");
+			goto err_no_dma;
+		}
+	}
+
+#else
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (rc)
+		return rc;
+
+
+	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return -ENOMEM;
+
+	pdev->dev.dma_parms = &od->dma_parms;
+	dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
+
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	od->base = base;
+
+
+	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
+	dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask);
+	dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
+	od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
+	od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
+	od->ddev.device_tx_status = bcm2835_dma_tx_status;
+	od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
+	od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
+	od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg;
+	od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
+	od->ddev.device_config = bcm2835_dma_slave_config;
+	od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	od->ddev.dev = &pdev->dev;
+	INIT_LIST_HEAD(&od->ddev.channels);
+	spin_lock_init(&od->lock);
+
+	platform_set_drvdata(pdev, od);
+
+
+	/* Request DMA channel mask from device tree */
+	if (of_property_read_u32(pdev->dev.of_node,
+			"brcm,dma-channel-mask",
+			&chans_available)) {
+		dev_err(&pdev->dev, "Failed to get channel mask\n");
+		rc = -EINVAL;
+		goto err_no_dma;
+	}
+
+
+	/*
+	 * Do not use the FIQ and BULK channels,
+	 * because they are used by the GPU.
+	 */
+	chans_available &= ~(BCM2835_DMA_FIQ_MASK | BCM2835_DMA_BULK_MASK);
+
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		irq = platform_get_irq(pdev, i);
+		if (irq < 0)
+			break;
+
+		if (chans_available & (1 << i)) {
+			rc = bcm2835_dma_chan_init(od, i, irq);
+			if (rc)
+				goto err_no_dma;
+		}
+	}
+
+	dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);
+
+	/* Device-tree DMA controller registration */
+	rc = of_dma_controller_register(pdev->dev.of_node,
+			bcm2835_dma_xlate, od);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to register DMA controller\n");
+		goto err_no_dma;
+	}
+#endif
+
+	rc = dma_async_device_register(&od->ddev);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"Failed to register slave DMA engine device: %d\n", rc);
+		goto err_no_dma;
+	}
+
+	dev_info(&pdev->dev, "Load BCM2835 DMA engine driver\n");
+	dev_info(&pdev->dev, "dma_debug:%x\n", dma_debug);
+
+	return 0;
+
+err_no_dma:
+	bcm2835_dma_free(od);
+	return rc;
+}
+
+static int bcm2835_dma_remove(struct platform_device *pdev)
+{
+	struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+
+	dma_async_device_unregister(&od->ddev);
+	bcm2835_dma_free(od);
+	bcm_dmaman_remove(pdev);
+
+	return 0;
+}
+
+static struct platform_driver bcm2835_dma_driver = {
+	.probe	= bcm2835_dma_probe,
+	.remove	= bcm2835_dma_remove,
+	.driver = {
+		.name = "bcm2708-dmaengine",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(bcm2835_dma_of_match),
+	},
+};
+
+static int bcm2835_init(void)
+{
+	return platform_driver_register(&bcm2835_dma_driver);
+}
+
+static void bcm2835_exit(void)
+{
+	platform_driver_unregister(&bcm2835_dma_driver);
+}
+
+/*
+ * Load after serial driver (arch_initcall) so we see the messages if it fails,
+ * but before drivers (module_init) that need a DMA channel.
+ */
+subsys_initcall(bcm2835_init);
+module_exit(bcm2835_exit);
+
+module_param(dma_debug, uint, 0644);
+#ifdef CONFIG_DMA_BCM2708_LEGACY
+/* Keep backward compatibility: dma.dmachans= */
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "dma."
+module_param(dmachans, int, 0644);
+#endif
+MODULE_ALIAS("platform:bcm2835-dma");
+MODULE_DESCRIPTION("BCM2835 DMA engine driver");
+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
+MODULE_AUTHOR("Gellert Weisz <gellert@raspberrypi.org>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/linux/platform_data/dma-bcm2708.h
@@ -0,0 +1,127 @@
+/*
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PLAT_BCM2708_DMA_H
+#define _PLAT_BCM2708_DMA_H
+
+/* DMA CS Control and Status bits */
+#define BCM2708_DMA_ACTIVE	BIT(0)
+#define BCM2708_DMA_INT		BIT(2)
+#define BCM2708_DMA_ISPAUSED	BIT(4)  /* Pause requested or not active */
+#define BCM2708_DMA_ISHELD	BIT(5)  /* Is held by DREQ flow control */
+#define BCM2708_DMA_ERR		BIT(8)
+#define BCM2708_DMA_ABORT	BIT(30) /* stop current CB, go to next, WO */
+#define BCM2708_DMA_RESET	BIT(31) /* WO, self clearing */
+
+/* DMA control block "info" field bits */
+#define BCM2708_DMA_INT_EN	BIT(0)
+#define BCM2708_DMA_TDMODE	BIT(1)
+#define BCM2708_DMA_WAIT_RESP	BIT(3)
+#define BCM2708_DMA_D_INC	BIT(4)
+#define BCM2708_DMA_D_WIDTH	BIT(5)
+#define BCM2708_DMA_D_DREQ	BIT(6)
+#define BCM2708_DMA_S_INC	BIT(8)
+#define BCM2708_DMA_S_WIDTH	BIT(9)
+#define BCM2708_DMA_S_DREQ	BIT(10)
+
+#define	BCM2708_DMA_BURST(x)	(((x) & 0xf) << 12)
+#define	BCM2708_DMA_PER_MAP(x)	((x) << 16)
+#define	BCM2708_DMA_WAITS(x)	(((x) & 0x1f) << 21)
+
+#define BCM2708_DMA_DREQ_EMMC	11
+#define BCM2708_DMA_DREQ_SDHOST	13
+
+#define BCM2708_DMA_CS		0x00 /* Control and Status */
+#define BCM2708_DMA_ADDR	0x04
+/* the current control block appears in the following registers - read only */
+#define BCM2708_DMA_INFO	0x08
+#define BCM2708_DMA_SOURCE_AD	0x0c
+#define BCM2708_DMA_DEST_AD	0x10
+#define BCM2708_DMA_NEXTCB	0x1C
+#define BCM2708_DMA_DEBUG	0x20
+
+#define BCM2708_DMA4_CS		(BCM2708_DMA_CHAN(4) + BCM2708_DMA_CS)
+#define BCM2708_DMA4_ADDR	(BCM2708_DMA_CHAN(4) + BCM2708_DMA_ADDR)
+
+#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w))
+
+/* When listing features we can ask for when allocating DMA channels give
+   those with higher priority smaller ordinal numbers */
+#define BCM_DMA_FEATURE_FAST_ORD	0
+#define BCM_DMA_FEATURE_BULK_ORD	1
+#define BCM_DMA_FEATURE_NORMAL_ORD	2
+#define BCM_DMA_FEATURE_LITE_ORD	3
+#define BCM_DMA_FEATURE_FAST		BIT(BCM_DMA_FEATURE_FAST_ORD)
+#define BCM_DMA_FEATURE_BULK		BIT(BCM_DMA_FEATURE_BULK_ORD)
+#define BCM_DMA_FEATURE_NORMAL		BIT(BCM_DMA_FEATURE_NORMAL_ORD)
+#define BCM_DMA_FEATURE_LITE		BIT(BCM_DMA_FEATURE_LITE_ORD)
+#define BCM_DMA_FEATURE_COUNT		4
+
+struct bcm2708_dma_cb {
+	unsigned long info;
+	unsigned long src;
+	unsigned long dst;
+	unsigned long length;
+	unsigned long stride;
+	unsigned long next;
+	unsigned long pad[2];
+};
+
+struct scatterlist;
+
+#ifdef CONFIG_DMA_BCM2708_LEGACY
+
+int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len);
+void bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block);
+void bcm_dma_wait_idle(void __iomem *dma_chan_base);
+bool bcm_dma_is_busy(void __iomem *dma_chan_base);
+int bcm_dma_abort(void __iomem *dma_chan_base);
+
+/* return channel no or -ve error */
+int bcm_dma_chan_alloc(unsigned preferred_feature_set,
+		       void __iomem **out_dma_base, int *out_dma_irq);
+int bcm_dma_chan_free(int channel);
+
+#else /* CONFIG_DMA_BCM2708_LEGACY */
+
+static inline int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr,
+					  int sg_len)
+{
+	return 0;
+}
+
+static inline void bcm_dma_start(void __iomem *dma_chan_base,
+				 dma_addr_t control_block) { }
+
+static inline void bcm_dma_wait_idle(void __iomem *dma_chan_base) { }
+
+static inline bool bcm_dma_is_busy(void __iomem *dma_chan_base)
+{
+	return false;
+}
+
+static inline int bcm_dma_abort(void __iomem *dma_chan_base)
+{
+	return -EINVAL;
+}
+
+static inline int bcm_dma_chan_alloc(unsigned preferred_feature_set,
+				     void __iomem **out_dma_base,
+				     int *out_dma_irq)
+{
+	return -EINVAL;
+}
+
+static inline int bcm_dma_chan_free(int channel)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_DMA_BCM2708_LEGACY */
+
+#endif /* _PLAT_BCM2708_DMA_H */