1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
|
From c7773e6daa5df456d6e0b935321425f3cb7a55b8 Mon Sep 17 00:00:00 2001
From: Jan Grulich <jan@grulich.eu>
Date: Mon, 24 Aug 2015 16:03:47 +0100
Subject: [PATCH 084/381] RaspiDAC3 support
Signed-off-by: Jan Grulich <jan@grulich.eu>
config: fix RaspiDAC Rev.3x dependencies
Change depends to SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
like the other I2S soundcard drivers.
Signed-off-by: Matthias Reichl <hias@horus.com>
---
sound/soc/bcm/Kconfig | 8 ++
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/raspidac3.c | 191 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 201 insertions(+)
create mode 100644 sound/soc/bcm/raspidac3.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -56,3 +56,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC
select SND_SOC_PCM512x_I2C
help
Say Y or M if you want to add support for IQaudIO-DAC.
+
+config SND_BCM2708_SOC_RASPIDAC3
+ tristate "Support for RaspiDAC Rev.3x"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_PCM512x_I2C
+ select SND_SOC_TPA6130A2
+ help
+ Say Y or M if you want to add support for RaspiDAC Rev.3x.
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -11,6 +11,7 @@ snd-soc-hifiberry-amp-objs := hifiberry_
snd-soc-rpi-dac-objs := rpi-dac.o
snd-soc-rpi-proto-objs := rpi-proto.o
snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+snd-soc-raspidac3-objs := raspidac3.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
@@ -19,3 +20,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_A
obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
--- /dev/null
+++ b/sound/soc/bcm/raspidac3.c
@@ -0,0 +1,191 @@
+/*
+ * ASoC Driver for RaspiDAC v3
+ *
+ * Author: Jan Grulich <jan@grulich.eu>
+ * Copyright 2015
+ * based on code by Daniel Matuschek <daniel@hifiberry.com>
+ * based on code by Florian Meier <florian.meier@koalo.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/pcm512x.h"
+#include "../codecs/tpa6130a2.h"
+
+/* sound card init */
+static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd)
+{
+ int ret;
+ struct snd_soc_card *card = rtd->card;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08);
+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
+
+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
+ else {
+ struct snd_kcontrol *kctl;
+
+ ret = tpa6130a2_add_controls(codec);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to add TPA6130A2 controls: %d\n",
+ ret);
+ ret = snd_soc_limit_volume(card,
+ "TPA6130A2 Headphone Playback Volume",
+ 54);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n",
+ ret);
+ kctl = snd_soc_card_get_kcontrol(card,
+ "TPA6130A2 Headphone Playback Volume");
+ if (kctl) {
+ strcpy(kctl->id.name, "Headphones Playback Volume");
+ /* disable the volume dB scale so alsamixer works */
+ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
+ }
+
+ kctl = snd_soc_card_get_kcontrol(card,
+ "TPA6130A2 Headphone Playback Switch");
+ if (kctl)
+ strcpy(kctl->id.name, "Headphones Playback Switch");
+ }
+
+ return 0;
+}
+
+/* set hw parameters */
+static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* startup */
+static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) {
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08);
+ tpa6130a2_stereo_enable(codec, 1);
+ return 0;
+}
+
+/* shutdown */
+static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) {
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
+ tpa6130a2_stereo_enable(codec, 0);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_raspidac3_ops = {
+ .hw_params = snd_rpi_raspidac3_hw_params,
+ .startup = snd_rpi_raspidac3_startup,
+ .shutdown = snd_rpi_raspidac3_shutdown,
+};
+
+/* interface setup */
+static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = {
+{
+ .name = "RaspiDAC Rev.3x",
+ .stream_name = "RaspiDAC HiFi",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm512x-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm512x.1-004c",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_rpi_raspidac3_ops,
+ .init = snd_rpi_raspidac3_init,
+},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_raspidac3 = {
+ .name = "RaspiDAC Rev.3x HiFi Audio Card",
+ .dai_link = snd_rpi_raspidac3_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai),
+};
+
+/* sound card test */
+static int snd_rpi_raspidac3_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_rpi_raspidac3.dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0];
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+ }
+
+ ret = snd_soc_register_card(&snd_rpi_raspidac3);
+ if (ret)
+ dev_err(&pdev->dev,
+ "snd_soc_register_card() failed: %d\n", ret);
+
+ return ret;
+}
+
+/* sound card disconnect */
+static int snd_rpi_raspidac3_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_rpi_raspidac3);
+}
+
+static const struct of_device_id raspidac3_of_match[] = {
+ { .compatible = "jg,raspidacv3", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, raspidac3_of_match);
+
+/* sound card platform driver */
+static struct platform_driver snd_rpi_raspidac3_driver = {
+ .driver = {
+ .name = "snd-rpi-raspidac3",
+ .owner = THIS_MODULE,
+ .of_match_table = raspidac3_of_match,
+ },
+ .probe = snd_rpi_raspidac3_probe,
+ .remove = snd_rpi_raspidac3_remove,
+};
+
+module_platform_driver(snd_rpi_raspidac3_driver);
+
+MODULE_AUTHOR("Jan Grulich <jan@grulich.eu>");
+MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x");
+MODULE_LICENSE("GPL v2");
|
