blob: 894b15fdb6ff1d2c96a95aac62631390bdb54091 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
|
From 71f287127dd0aafa0346f198c5eef0c4aac7a5f6 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 18 Feb 2016 15:28:14 +0000
Subject: [PATCH 149/381] BCM270X_DT: at86rf233 overlay - drop to 3MHz
The consensus is that 6MHz is too fast, but that 3MHz is OK.
See: https://github.com/raspberrypi/linux/issues/1294
https://github.com/raspberrypi/linux/issues/1151
---
arch/arm/boot/dts/overlays/README | 2 +-
arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -188,7 +188,7 @@ Load: dtoverlay=at86rf233,<param>=<val
Params: interrupt GPIO used for INT (default 23)
reset GPIO used for Reset (default 24)
sleep GPIO used for Sleep (default 25)
- speed SPI bus speed in Hz (default 6000000)
+ speed SPI bus speed in Hz (default 3000000)
trim Fine tuning of the internal capacitance
arrays (0=+0pF, 15=+4.5pF, default 15)
--- a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts
+++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts
@@ -25,7 +25,7 @@
interrupts = <23 4>; /* active high */
reset-gpio = <&gpio 24 1>;
sleep-gpio = <&gpio 25 1>;
- spi-max-frequency = <6000000>;
+ spi-max-frequency = <3000000>;
xtal-trim = /bits/ 8 <0xf>;
};
};
|
