summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-4.4/0156-Aux-SPI-1-2-implementation.patch
blob: 8094495f34994ef4898eaadb6027596054612430 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
From fb47ac65c77bd2bc6480bb45a0bef29056108984 Mon Sep 17 00:00:00 2001
From: Fraser <github@frasersdev.net>
Date: Tue, 23 Feb 2016 10:04:37 +1100
Subject: [PATCH] Aux SPI 1&2 implementation

Adds aux spi 1 & 2 devices to compatible raspberry PIs.
* Minor config of the driver build environment to ensure they get built
for CONFIG_ARCH_BCM2708 & CONFIG_ARCH_BCM2709 devices.
* Adds the aux spi driver into the defconfigs as a module.
* Adds the auxiliary and spi1/2 devices into the device tree in a
disabled state
* Provides decide tree overlays which enables the devices and gives
users a degree of control over how they are setup.
---
 arch/arm/boot/dts/bcm2708_common.dtsi           | 34 ++++++++-
 arch/arm/boot/dts/overlays/Makefile             |  6 ++
 arch/arm/boot/dts/overlays/README               | 99 +++++++++++++++++++++++++
 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 57 ++++++++++++++
 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 69 +++++++++++++++++
 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 81 ++++++++++++++++++++
 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 57 ++++++++++++++
 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 69 +++++++++++++++++
 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 81 ++++++++++++++++++++
 arch/arm/configs/bcm2709_defconfig              |  1 +
 arch/arm/configs/bcmrpi_defconfig               |  1 +
 drivers/clk/bcm/Makefile                        |  2 +-
 drivers/spi/Kconfig                             |  2 +-
 13 files changed, 556 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts

--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/clock/bcm2835-aux.h>
 #include "skeleton.dtsi"
 
 / {
@@ -5,6 +6,7 @@
 
 	aliases {
 		audio = &audio;
+		aux = &aux;
 		sound = &sound;
 		soc = &soc;
 		dma = &dma;
@@ -19,6 +21,8 @@
 		spi0 = &spi0;
 		i2c0 = &i2c0;
 		uart1 = &uart1;
+		spi1 = &spi1;
+		spi2 = &spi2;
 		mmc = &mmc;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -186,6 +190,14 @@
 			status = "disabled";
 		};
 
+		aux: aux@0x7e215004 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clk_core>;
+			status = "disabled";
+		};
+
 		uart1: uart@7e215040 {
 			compatible = "brcm,bcm2835-aux-uart", "ns16550";
 			reg = <0x7e215040 0x40>;
@@ -194,7 +206,27 @@
 			reg-shift = <2>;
 			no-loopback-test;
 			status = "disabled";
-	        };
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>, <0x7e215000 0x8>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150C0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150C0 0x40>, <0x7e215000 0x8>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
 		mmc: mmc@7e300000 {
 			compatible = "brcm,bcm2835-mmc";
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -57,6 +57,12 @@ dtb-$(RPI_DT_OVERLAYS) += sdtweak-overla
 dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-1cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-2cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-3cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-1cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-2cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-3cs-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += spi-gpio35-39-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -713,6 +713,105 @@ Load:   dtoverlay=spi-gpio35-39
 Params: <None>
 
 
+Name:   spi1-1cs
+Info:   Enables spi1 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin number for the CS line and spidev device node
+        creation are configurable.
+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+              A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load:   dtoverlay=spi1-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.0 (default
+                                is 'okay' or enabled).
+
+
+Name:   spi1-2cs
+Info:   Enables spi1 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+              A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load:   dtoverlay=spi1-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.0 (default
+                                is 'okay' or enabled).
+        cs1_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.1 (default
+                                is 'okay' or enabled).
+
+
+Name:   spi1-3cs
+Info:   Enables spi1 with three chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+              A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load:   dtoverlay=spi1-3cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
+        cs2_pin                 GPIO pin for CS2 (default 16 - BCM SPI1_CE2).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.0 (default
+                                is 'okay' or enabled).
+        cs1_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.1 (default
+                                is 'okay' or enabled).
+        cs2_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev1.2 (default
+                                is 'okay' or enabled).
+
+
+Name:   spi2-1cs
+Info:   Enables spi2 with a single chip select (CS) line and associated spidev
+        dev node. The gpio pin number for the CS line and spidev device node
+        creation are configurable.
+        N.B.: spi2 is only accessible with the Compute Module.
+Load:   dtoverlay=spi2-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.0 (default
+                                is 'okay' or enabled).
+
+
+Name:   spi2-2cs
+Info:   Enables spi2 with two chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+        N.B.: spi2 is only accessible with the Compute Module.
+Load:   dtoverlay=spi2-2cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.0 (default
+                                is 'okay' or enabled).
+        cs1_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.1 (default
+                                is 'okay' or enabled).
+
+
+Name:   spi2-3cs
+Info:   Enables spi2 with three chip select (CS) lines and associated spidev
+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
+        creation are configurable.
+        N.B.: spi2 is only accessible with the Compute Module.
+Load:   dtoverlay=spi2-3cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+        cs1_pin                 GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
+        cs2_pin                 GPIO pin for CS2 (default 45 - BCM SPI2_CE2).
+        cs0_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.0 (default
+                                is 'okay' or enabled).
+        cs1_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.1 (default
+                                is 'okay' or enabled).
+        cs2_spidev              Set to 'disabled' to stop the creation of a
+                                userspace device node /dev/spidev2.2 (default
+                                is 'okay' or enabled).
+
+
 Name:   tinylcd35
 Info:   3.5" Color TFT Display by www.tinylcd.com
         Options: Touch, RTC, keypad
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi1_pins: spi1_pins {
+				brcm,pins = <19 20 21>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi1_cs_pins: spi1_cs_pins {
+				brcm,pins = <18>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi1>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+			cs-gpios = <&gpio 18 1>;
+			status = "okay";
+
+			spidev1_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev1_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi1_pins: spi1_pins {
+				brcm,pins = <19 20 21>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi1_cs_pins: spi1_cs_pins {
+				brcm,pins = <18 17>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi1>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+			cs-gpios = <&gpio 18 1>, <&gpio 17 1>;
+			status = "okay";
+
+			spidev1_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev1_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&spi1_cs_pins>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev1_0>,"status";
+		cs1_spidev = <&spidev1_1>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi1_pins: spi1_pins {
+				brcm,pins = <19 20 21>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi1_cs_pins: spi1_cs_pins {
+				brcm,pins = <18 17 16>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi1>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+			cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>;
+			status = "okay";
+
+			spidev1_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev1_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev1_2: spidev@2 {
+				compatible = "spidev";
+				reg = <2>;      /* CE2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&spi1_cs_pins>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs2_pin  = <&spi1_cs_pins>,"brcm,pins:8",
+			   <&frag1>,"cs-gpios:28";
+		cs0_spidev = <&spidev1_0>,"status";
+		cs1_spidev = <&spidev1_1>,"status";
+		cs2_spidev = <&spidev1_2>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi2_pins: spi2_pins {
+				brcm,pins = <40 41 42>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi2_cs_pins: spi2_cs_pins {
+				brcm,pins = <43>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi2>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+			cs-gpios = <&gpio 43 1>;
+			status = "okay";
+
+			spidev2_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs0_spidev = <&spidev2_0>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi2_pins: spi2_pins {
+				brcm,pins = <40 41 42>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi2_cs_pins: spi2_cs_pins {
+				brcm,pins = <43 44>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi2>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+			cs-gpios = <&gpio 43 1>, <&gpio 44 1>;
+			status = "okay";
+
+			spidev2_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev2_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&spi2_cs_pins>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs0_spidev = <&spidev2_0>,"status";
+		cs1_spidev = <&spidev2_1>,"status";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			spi2_pins: spi2_pins {
+				brcm,pins = <40 41 42>;
+				brcm,function = <3>; /* alt4 */
+			};
+
+			spi2_cs_pins: spi2_cs_pins {
+				brcm,pins = <43 44 45>;
+				brcm,function = <1>; /* output */
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&spi2>;
+		frag1: __overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+			cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>;
+			status = "okay";
+
+			spidev2_0: spidev@0 {
+				compatible = "spidev";
+				reg = <0>;      /* CE0 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev2_1: spidev@1 {
+				compatible = "spidev";
+				reg = <1>;      /* CE1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+
+			spidev2_2: spidev@2 {
+				compatible = "spidev";
+				reg = <2>;      /* CE2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spi-max-frequency = <500000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&spi2_cs_pins>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs2_pin  = <&spi2_cs_pins>,"brcm,pins:8",
+			   <&frag1>,"cs-gpios:28";
+		cs0_spidev = <&spidev2_0>,"status";
+		cs1_spidev = <&spidev2_1>,"status";
+		cs2_spidev = <&spidev2_2>,"status";
+	};
+};
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -601,6 +601,7 @@ CONFIG_I2C_BCM2708=m
 CONFIG_I2C_GPIO=m
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
 CONFIG_SPI_SPIDEV=y
 CONFIG_PPS=m
 CONFIG_PPS_CLIENT_LDISC=m
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -593,6 +593,7 @@ CONFIG_I2C_BCM2708=m
 CONFIG_I2C_GPIO=m
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
 CONFIG_SPI_SPIDEV=y
 CONFIG_PPS=m
 CONFIG_PPS_CLIENT_LDISC=m
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -4,7 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
 obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709)	+= clk-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835-aux.o
+obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709)	+= clk-bcm2835-aux.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-ns2.o
 obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o
 obj-$(CONFIG_ARCH_BCM_NSP)	+= clk-nsp.o
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -90,7 +90,7 @@ config SPI_BCM2835
 
 config SPI_BCM2835AUX
 	tristate "BCM2835 SPI auxiliary controller"
-	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 || COMPILE_TEST
 	depends on GPIOLIB
 	help
 	  This selects a driver for the Broadcom BCM2835 SPI aux master.