1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
From 0f34b495557223c0d129bf97a1fb89990cfd83ed Mon Sep 17 00:00:00 2001
From: Georgii Staroselskii <gosha371@gmail.com>
Date: Tue, 23 Aug 2016 17:40:05 +0400
Subject: [PATCH] overlays: added sc16is750 UART over I2C (#1617)
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 10 ++++++
.../boot/dts/overlays/sc16is750-i2c-overlay.dts | 37 ++++++++++++++++++++++
3 files changed, 48 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -75,6 +75,7 @@ dtbo-$(RPI_DT_OVERLAYS) += rpi-ft5406.dt
dtbo-$(RPI_DT_OVERLAYS) += rpi-proto.dtbo
dtbo-$(RPI_DT_OVERLAYS) += rpi-sense.dtbo
dtbo-$(RPI_DT_OVERLAYS) += rra-digidac1-wm8741-audio.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += sc16is750-i2c.dtbo
dtbo-$(RPI_DT_OVERLAYS) += sc16is752-spi1.dtbo
dtbo-$(RPI_DT_OVERLAYS) += sdhost.dtbo
dtbo-$(RPI_DT_OVERLAYS) += sdio.dtbo
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -935,6 +935,16 @@ Load: dtoverlay=rra-digidac1-wm8741-au
Params: <None>
+Name: sc16is750-i2c
+Info: Overlay for the NXP SC16IS750 UART with I2C Interface
+ Enables the chip on I2C1 at 0x48. To select another address,
+ please refer to table 10 in reference manual.
+
+Load: dtoverlay=sc16is750-i2c,<param>=<val>
+Params: int_pin GPIO used for IRQ (default 24)
+ addr Address (default 0x48)
+
+
Name: sc16is752-spi1
Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface
Enables the chip on SPI1.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
@@ -0,0 +1,37 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&i2c_arm>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ sc16is750: sc16is750@48 {
+ compatible = "nxp,sc16is750";
+ reg = <0x48>; /* address */
+ clocks = <&sc16is750_clk>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */
+ #gpio-cells = <2>;
+
+ sc16is750_clk: sc16is750_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <14745600>;
+ };
+ };
+ };
+ };
+
+
+ __overrides__ {
+ int_pin = <&sc16is750>,"interrupts:0";
+ addr = <&sc16is750>,"reg:0";
+ };
+
+};
|
