path: root/target/linux/brcm2708/patches-4.9/0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch

From 546bac0479e51024027f8c8820f912573643b101 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Wed, 18 Jan 2017 07:31:57 +1100
Subject: [PATCH] clk: bcm2835: Add leaf clock measurement support, disabled by
 default

This proved incredibly useful during debugging of the DSI driver, to
see if our clocks were running at rate we requested.  Let's leave it
here for the next person interacting with clocks on the platform (and
so that hopefully we can just hook it up to debugfs some day).

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 3f9195811d8d829556c4cd88d3f9e56a80d5ba60)
---
 drivers/clk/bcm/clk-bcm2835.c | 144 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 119 insertions(+), 25 deletions(-)

--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -39,6 +39,7 @@
 #include <linux/clk.h>
 #include <linux/clk/bcm2835.h>
 #include <linux/debugfs.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -98,7 +99,8 @@
 #define CM_SMIDIV		0x0b4
 /* no definition for 0x0b8  and 0x0bc */
 #define CM_TCNTCTL		0x0c0
-#define CM_TCNTDIV		0x0c4
+# define CM_TCNT_SRC1_SHIFT		12
+#define CM_TCNTCNT		0x0c4
 #define CM_TECCTL		0x0c8
 #define CM_TECDIV		0x0cc
 #define CM_TD0CTL		0x0d0
@@ -338,6 +340,61 @@ static inline u32 cprman_read(struct bcm
 	return readl(cprman->regs + reg);
 }
 
+/* Does a cycle of measuring a clock through the TCNT clock, which may
+ * source from many other clocks in the system.
+ */
+static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman,
+					      u32 tcnt_mux)
+{
+	u32 osccount = 19200; /* 1ms */
+	u32 count;
+	ktime_t timeout;
+
+	spin_lock(&cprman->regs_lock);
+
+	cprman_write(cprman, CM_TCNTCTL, CM_KILL);
+
+	cprman_write(cprman, CM_TCNTCTL,
+		     (tcnt_mux & CM_SRC_MASK) |
+		     (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT);
+
+	cprman_write(cprman, CM_OSCCOUNT, osccount);
+
+	/* do a kind delay at the start */
+	mdelay(1);
+
+	/* Finish off whatever is left of OSCCOUNT */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_OSCCOUNT)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	/* Wait for BUSY to clear. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for !BUSY\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	count = cprman_read(cprman, CM_TCNTCNT);
+
+	cprman_write(cprman, CM_TCNTCTL, 0);
+
+out:
+	spin_unlock(&cprman->regs_lock);
+
+	return count * 1000;
+}
+
 static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
 				  struct debugfs_reg32 *regs, size_t nregs,
 				  struct dentry *dentry)
@@ -473,6 +530,8 @@ struct bcm2835_clock_data {
 
 	bool is_vpu_clock;
 	bool is_mash_clock;
+
+	u32 tcnt_mux;
 };
 
 struct bcm2835_gate_data {
@@ -1008,6 +1067,17 @@ static int bcm2835_clock_on(struct clk_h
 		     CM_GATE);
 	spin_unlock(&cprman->regs_lock);
 
+	/* Debug code to measure the clock once it's turned on to see
+	 * if it's ticking at the rate we expect.
+	 */
+	if (data->tcnt_mux && false) {
+		dev_info(cprman->dev,
+			 "clk %s: rate %ld, measure %ld\n",
+			 data->name,
+			 clk_hw_get_rate(hw),
+			 bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux));
+	}
+
 	return 0;
 }
 
@@ -1774,7 +1844,8 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_OTPCTL,
 		.div_reg = CM_OTPDIV,
 		.int_bits = 4,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		.tcnt_mux = 6),
 	/*
 	 * Used for a 1Mhz clock for the system clocksource, and also used
 	 * bythe watchdog timer and the camera pulse generator.
@@ -1808,13 +1879,15 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_H264CTL,
 		.div_reg = CM_H264DIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 1),
 	[BCM2835_CLOCK_ISP]	= REGISTER_VPU_CLK(
 		.name = "isp",
 		.ctl_reg = CM_ISPCTL,
 		.div_reg = CM_ISPDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 2),
 
 	/*
 	 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL
@@ -1825,13 +1898,15 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_SDCCTL,
 		.div_reg = CM_SDCDIV,
 		.int_bits = 6,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		.tcnt_mux = 3),
 	[BCM2835_CLOCK_V3D]	= REGISTER_VPU_CLK(
 		.name = "v3d",
 		.ctl_reg = CM_V3DCTL,
 		.div_reg = CM_V3DDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 4),
 	/*
 	 * VPU clock.  This doesn't have an enable bit, since it drives
 	 * the bus for everything else, and is special so it doesn't need
@@ -1845,7 +1920,8 @@ static const struct bcm2835_clk_desc clk
 		.int_bits = 12,
 		.frac_bits = 8,
 		.flags = CLK_IS_CRITICAL,
-		.is_vpu_clock = true),
+		.is_vpu_clock = true,
+		.tcnt_mux = 5),
 
 	/* clocks with per parent mux */
 	[BCM2835_CLOCK_AVEO]	= REGISTER_PER_CLK(
@@ -1853,19 +1929,22 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_AVEOCTL,
 		.div_reg = CM_AVEODIV,
 		.int_bits = 4,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		.tcnt_mux = 38),
 	[BCM2835_CLOCK_CAM0]	= REGISTER_PER_CLK(
 		.name = "cam0",
 		.ctl_reg = CM_CAM0CTL,
 		.div_reg = CM_CAM0DIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 14),
 	[BCM2835_CLOCK_CAM1]	= REGISTER_PER_CLK(
 		.name = "cam1",
 		.ctl_reg = CM_CAM1CTL,
 		.div_reg = CM_CAM1DIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 15),
 	[BCM2835_CLOCK_DFT]	= REGISTER_PER_CLK(
 		.name = "dft",
 		.ctl_reg = CM_DFTCTL,
@@ -1877,7 +1956,8 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_DPICTL,
 		.div_reg = CM_DPIDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 17),
 
 	/* Arasan EMMC clock */
 	[BCM2835_CLOCK_EMMC]	= REGISTER_PER_CLK(
@@ -1885,7 +1965,8 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_EMMCCTL,
 		.div_reg = CM_EMMCDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 39),
 
 	/* General purpose (GPIO) clocks */
 	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
@@ -1894,7 +1975,8 @@ static const struct bcm2835_clk_desc clk
 		.div_reg = CM_GP0DIV,
 		.int_bits = 12,
 		.frac_bits = 12,
-		.is_mash_clock = true),
+		.is_mash_clock = true,
+		.tcnt_mux = 20),
 	[BCM2835_CLOCK_GP1]	= REGISTER_PER_CLK(
 		.name = "gp1",
 		.ctl_reg = CM_GP1CTL,
@@ -1902,7 +1984,8 @@ static const struct bcm2835_clk_desc clk
 		.int_bits = 12,
 		.frac_bits = 12,
 		.flags = CLK_IS_CRITICAL,
-		.is_mash_clock = true),
+		.is_mash_clock = true,
+		.tcnt_mux = 21),
 	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
 		.name = "gp2",
 		.ctl_reg = CM_GP2CTL,
@@ -1917,40 +2000,46 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_HSMCTL,
 		.div_reg = CM_HSMDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 22),
 	[BCM2835_CLOCK_PCM]	= REGISTER_PER_CLK(
 		.name = "pcm",
 		.ctl_reg = CM_PCMCTL,
 		.div_reg = CM_PCMDIV,
 		.int_bits = 12,
 		.frac_bits = 12,
-		.is_mash_clock = true),
+		.is_mash_clock = true,
+		.tcnt_mux = 23),
 	[BCM2835_CLOCK_PWM]	= REGISTER_PER_CLK(
 		.name = "pwm",
 		.ctl_reg = CM_PWMCTL,
 		.div_reg = CM_PWMDIV,
 		.int_bits = 12,
 		.frac_bits = 12,
-		.is_mash_clock = true),
+		.is_mash_clock = true,
+		.tcnt_mux = 24),
 	[BCM2835_CLOCK_SLIM]	= REGISTER_PER_CLK(
 		.name = "slim",
 		.ctl_reg = CM_SLIMCTL,
 		.div_reg = CM_SLIMDIV,
 		.int_bits = 12,
 		.frac_bits = 12,
-		.is_mash_clock = true),
+		.is_mash_clock = true,
+		.tcnt_mux = 25),
 	[BCM2835_CLOCK_SMI]	= REGISTER_PER_CLK(
 		.name = "smi",
 		.ctl_reg = CM_SMICTL,
 		.div_reg = CM_SMIDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 27),
 	[BCM2835_CLOCK_UART]	= REGISTER_PER_CLK(
 		.name = "uart",
 		.ctl_reg = CM_UARTCTL,
 		.div_reg = CM_UARTDIV,
 		.int_bits = 10,
-		.frac_bits = 12),
+		.frac_bits = 12,
+		.tcnt_mux = 28),
 
 	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
 	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(
@@ -1963,7 +2052,8 @@ static const struct bcm2835_clk_desc clk
 		 * Allow rate change propagation only on PLLH_AUX which is
 		 * assigned index 7 in the parent array.
 		 */
-		.set_rate_parent = BIT(7)),
+		.set_rate_parent = BIT(7),
+		.tcnt_mux = 29),
 
 	/* dsi clocks */
 	[BCM2835_CLOCK_DSI0E]	= REGISTER_PER_CLK(
@@ -1971,25 +2061,29 @@ static const struct bcm2835_clk_desc clk
 		.ctl_reg = CM_DSI0ECTL,
 		.div_reg = CM_DSI0EDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 18),
 	[BCM2835_CLOCK_DSI1E]	= REGISTER_PER_CLK(
 		.name = "dsi1e",
 		.ctl_reg = CM_DSI1ECTL,
 		.div_reg = CM_DSI1EDIV,
 		.int_bits = 4,
-		.frac_bits = 8),
+		.frac_bits = 8,
+		.tcnt_mux = 19),
 	[BCM2835_CLOCK_DSI0P]	= REGISTER_DSI0_CLK(
 		.name = "dsi0p",
 		.ctl_reg = CM_DSI0PCTL,
 		.div_reg = CM_DSI0PDIV,
 		.int_bits = 0,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		.tcnt_mux = 12),
 	[BCM2835_CLOCK_DSI1P]	= REGISTER_DSI1_CLK(
 		.name = "dsi1p",
 		.ctl_reg = CM_DSI1PCTL,
 		.div_reg = CM_DSI1PDIV,
 		.int_bits = 0,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		.tcnt_mux = 13),
 
 	/* the gates */