1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
Optionally omit the CS signal, if there's only one device on the bus.
--mb
Index: linux-2.6.28.2/drivers/spi/spi_gpio.c
===================================================================
--- linux-2.6.28.2.orig/drivers/spi/spi_gpio.c 2009-02-11 18:48:23.000000000 +0100
+++ linux-2.6.28.2/drivers/spi/spi_gpio.c 2009-02-11 18:48:50.000000000 +0100
@@ -178,8 +178,10 @@ static void spi_gpio_chipselect(struct s
if (is_active)
setsck(spi, spi->mode & SPI_CPOL);
- /* SPI is normally active-low */
- gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
+ if (cs != SPI_GPIO_NO_CHIPSELECT) {
+ /* SPI is normally active-low */
+ gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
+ }
}
static int spi_gpio_setup(struct spi_device *spi)
@@ -191,15 +193,17 @@ static int spi_gpio_setup(struct spi_dev
return -EINVAL;
if (!spi->controller_state) {
- status = gpio_request(cs, spi->dev.bus_id);
- if (status)
- return status;
- status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+ if (cs != SPI_GPIO_NO_CHIPSELECT) {
+ status = gpio_request(cs, spi->dev.bus_id);
+ if (status)
+ return status;
+ status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+ }
}
if (!status)
status = spi_bitbang_setup(spi);
if (status) {
- if (!spi->controller_state)
+ if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
gpio_free(cs);
}
return status;
@@ -209,7 +213,8 @@ static void spi_gpio_cleanup(struct spi_
{
unsigned long cs = (unsigned long) spi->controller_data;
- gpio_free(cs);
+ if (cs != SPI_GPIO_NO_CHIPSELECT)
+ gpio_free(cs);
spi_bitbang_cleanup(spi);
}
Index: linux-2.6.28.2/include/linux/spi/spi_gpio.h
===================================================================
--- linux-2.6.28.2.orig/include/linux/spi/spi_gpio.h 2009-02-11 18:48:23.000000000 +0100
+++ linux-2.6.28.2/include/linux/spi/spi_gpio.h 2009-02-11 18:58:31.000000000 +0100
@@ -25,10 +25,16 @@
* ...
* };
*
+ * If chipselect is not used (there's only one device on the bus), assign
+ * SPI_GPIO_NO_CHIPSELECT to the controller_data:
+ * .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
+ *
* If the bitbanged bus is later switched to a "native" controller,
* that platform_device and controller_data should be removed.
*/
+#define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l)
+
/**
* struct spi_gpio_platform_data - parameter for bitbanged SPI master
* @sck: number of the GPIO used for clock output
|
