path: root/target/linux/generic/patches-3.9/020-ssb_update.patch

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -138,13 +138,13 @@ config SSB_DRIVER_MIPS
 
 config SSB_SFLASH
 	bool "SSB serial flash support"
-	depends on SSB_DRIVER_MIPS && BROKEN
+	depends on SSB_DRIVER_MIPS
 	default y
 
 # Assumption: We are on embedded, if we compile the MIPS core.
 config SSB_EMBEDDED
 	bool
-	depends on SSB_DRIVER_MIPS
+	depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
 	default y
 
 config SSB_DRIVER_EXTIF
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
 
 	if (cc->dev->id.revision >= 11)
 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
-	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+	ssb_dbg("chipcommon status is 0x%x\n", cc->status);
 
 	if (cc->dev->id.revision >= 20) {
 		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
 		return;
 	}
 
-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-		   (crystalfreq / 1000), (crystalfreq % 1000));
+	ssb_info("Programming PLL to %u.%03u MHz\n",
+		 crystalfreq / 1000, crystalfreq % 1000);
 
 	/* First turn the PLL off. */
 	switch (bus->chip_id) {
@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
 	}
 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+		ssb_emerg("Failed to turn the PLL off!\n");
 
 	/* Set PDIV in PLL control 0. */
 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
 		return;
 	}
 
-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-		   (crystalfreq / 1000), (crystalfreq % 1000));
+	ssb_info("Programming PLL to %u.%03u MHz\n",
+		 crystalfreq / 1000, crystalfreq % 1000);
 
 	/* First turn the PLL off. */
 	switch (bus->chip_id) {
@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
 	}
 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+		ssb_emerg("Failed to turn the PLL off!\n");
 
 	/* Set p1div and p2div. */
 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
 	case 43222:
 		break;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "ERROR: PLL init unknown for device %04X\n",
-			   bus->chip_id);
+		ssb_err("ERROR: PLL init unknown for device %04X\n",
+			bus->chip_id);
 	}
 }
 
@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
 		max_msk = 0xFFFFF;
 		break;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "ERROR: PMU resource config unknown for device %04X\n",
-			   bus->chip_id);
+		ssb_err("ERROR: PMU resource config unknown for device %04X\n",
+			bus->chip_id);
 	}
 
 	if (updown_tab) {
@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon 
 	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
 	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
 
-	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
-		    cc->pmu.rev, pmucap);
+	ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
+		cc->pmu.rev, pmucap);
 
 	if (cc->pmu.rev == 1)
 		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
 	case 0x5354:
 		ssb_pmu_get_alp_clock_clk0(cc);
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "ERROR: PMU alp clock unknown for device %04X\n",
-			   bus->chip_id);
+		ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
+			bus->chip_id);
 		return 0;
 	}
 }
@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
 		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
 		return 240000000;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "ERROR: PMU cpu clock unknown for device %04X\n",
-			   bus->chip_id);
+		ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
+			bus->chip_id);
 		return 0;
 	}
 }
@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
 	case 0x5354:
 		return 120000000;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "ERROR: PMU controlclock unknown for device %04X\n",
-			   bus->chip_id);
+		ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
+			bus->chip_id);
 		return 0;
 	}
 }
@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct 
 		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
 		break;
 	case 43222:
-		/* TODO: BCM43222 requires updating PLLs too */
-		return;
+		if (spuravoid == 1) {
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
+		} else {
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
+		}
+		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+		break;
 	default:
 		ssb_printk(KERN_ERR PFX
 			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -9,6 +9,19 @@
 
 #include "ssb_private.h"
 
+static struct resource ssb_sflash_resource = {
+	.name	= "ssb_sflash",
+	.start	= SSB_FLASH2,
+	.end	= 0,
+	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device ssb_sflash_dev = {
+	.name		= "ssb_sflash",
+	.resource	= &ssb_sflash_resource,
+	.num_resources	= 1,
+};
+
 struct ssb_sflash_tbl_e {
 	char *name;
 	u32 id;
@@ -16,7 +29,7 @@ struct ssb_sflash_tbl_e {
 	u16 numblocks;
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
 	{ "M25P20", 0x11, 0x10000, 4, },
 	{ "M25P40", 0x12, 0x10000, 8, },
 
@@ -27,7 +40,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
 	{ 0 },
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
 	{ "SST25WF512", 1, 0x1000, 16, },
 	{ "SST25VF512", 0x48, 0x1000, 16, },
 	{ "SST25WF010", 2, 0x1000, 32, },
@@ -45,7 +58,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
 	{ 0 },
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
 	{ "AT45DB011", 0xc, 256, 512, },
 	{ "AT45DB021", 0x14, 256, 1024, },
 	{ "AT45DB041", 0x1c, 256, 2048, },
@@ -73,7 +86,8 @@ static void ssb_sflash_cmd(struct ssb_ch
 /* Initialize serial flash access */
 int ssb_sflash_init(struct ssb_chipcommon *cc)
 {
-	struct ssb_sflash_tbl_e *e;
+	struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
+	const struct ssb_sflash_tbl_e *e;
 	u32 id, id2;
 
 	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
@@ -131,10 +145,20 @@ int ssb_sflash_init(struct ssb_chipcommo
 		return -ENOTSUPP;
 	}
 
-	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
-		e->name, e->blocksize, e->numblocks);
-
-	pr_err("Serial flash support is not implemented yet!\n");
+	sflash->window = SSB_FLASH2;
+	sflash->blocksize = e->blocksize;
+	sflash->numblocks = e->numblocks;
+	sflash->size = sflash->blocksize * sflash->numblocks;
+	sflash->present = true;
+
+	pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+		e->name, sflash->size / 1024, e->blocksize, e->numblocks);
+
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+					 sflash->size;
+	ssb_sflash_dev.dev.platform_data = sflash;
 
-	return -ENOTSUPP;
+	return 0;
 }
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -167,21 +167,22 @@ static void set_irq(struct ssb_device *d
 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 	}
-	ssb_dprintk(KERN_INFO PFX
-		    "set_irq: core 0x%04x, irq %d => %d\n",
-		    dev->id.coreid, oldirq+2, irq+2);
+	ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
+		dev->id.coreid, oldirq+2, irq+2);
 }
 
 static void print_irq(struct ssb_device *dev, unsigned int irq)
 {
-	int i;
 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-	ssb_dprintk(KERN_INFO PFX
-		"core 0x%04x, irq :", dev->id.coreid);
-	for (i = 0; i <= 6; i++) {
-		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
-	}
-	ssb_dprintk("\n");
+	ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
+		dev->id.coreid,
+		irq_name[0], irq == 0 ? "*" : " ",
+		irq_name[1], irq == 1 ? "*" : " ",
+		irq_name[2], irq == 2 ? "*" : " ",
+		irq_name[3], irq == 3 ? "*" : " ",
+		irq_name[4], irq == 4 ? "*" : " ",
+		irq_name[5], irq == 5 ? "*" : " ",
+		irq_name[6], irq == 6 ? "*" : " ");
 }
 
 static void dump_irq(struct ssb_bus *bus)
@@ -286,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
 	if (!mcore->dev)
 		return; /* We don't have a MIPS core */
 
-	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
+	ssb_dbg("Initializing MIPS core...\n");
 
 	bus = mcore->dev->bus;
 	hz = ssb_clockspeed(bus);
@@ -334,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
 			break;
 		}
 	}
-	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+	ssb_dbg("after irq reconfiguration\n");
 	dump_irq(bus);
 
 	ssb_mips_serial_init(mcore);
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
 		return -ENODEV;
 	}
 
-	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-		   pci_name(d));
+	ssb_info("PCI: Fixing up device %s\n", pci_name(d));
 
 	/* Fix up interrupt lines */
 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
 		return;
 
-	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+	ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
 
 	/* Enable PCI bridge bus mastering and memory space */
 	pci_set_master(dev);
 	if (pcibios_enable_device(dev, ~0) < 0) {
-		ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+		ssb_err("PCI: SSB bridge enable failed\n");
 		return;
 	}
 
@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
 
 	/* Make sure our latency is high enough to handle the devices behind us */
 	lat = 168;
-	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-		   pci_name(dev), lat);
+	ssb_info("PCI: Fixing latency timer of device %s to %u\n",
+		 pci_name(dev), lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
 		return;
 	extpci_core = pc;
 
-	ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
+	ssb_dbg("PCIcore in host mode found\n");
 	/* Reset devices on the external PCI bus */
 	val = SSB_PCICORE_CTL_RST_OE;
 	val |= SSB_PCICORE_CTL_CLK_OE;
@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
 	udelay(1); /* Assertion time demanded by the PCI standard */
 
 	if (pc->dev->bus->has_cardbus_slot) {
-		ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
+		ssb_dbg("CardBus slot detected\n");
 		pc->cardbusmode = 1;
 		/* GPIO 1 resets the bridge */
 		ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
 					     bus->busnumber, &wdt,
 					     sizeof(wdt));
 	if (IS_ERR(pdev)) {
-		ssb_dprintk(KERN_INFO PFX
-			    "can not register watchdog device, err: %li\n",
-			    PTR_ERR(pdev));
+		ssb_dbg("can not register watchdog device, err: %li\n",
+			PTR_ERR(pdev));
 		return PTR_ERR(pdev);
 	}
 
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
 
 		err = sdrv->probe(sdev, &sdev->id);
 		if (err) {
-			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
-				   dev_name(sdev->dev));
+			ssb_err("Failed to thaw device %s\n",
+				dev_name(sdev->dev));
 			result = err;
 		}
 		ssb_device_put(sdev);
@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
 
 	err = ssb_gpio_unregister(bus);
 	if (err == -EBUSY)
-		ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
+		ssb_dbg("Some GPIOs are still in use\n");
 	else if (err)
-		ssb_dprintk(KERN_ERR PFX
-			    "Can not unregister GPIO driver: %i\n", err);
+		ssb_dbg("Can not unregister GPIO driver: %i\n", err);
 
 	ssb_buses_lock();
 	ssb_devices_unregister(bus);
@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
 
 		devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 		if (!devwrap) {
-			ssb_printk(KERN_ERR PFX
-				   "Could not allocate device\n");
+			ssb_err("Could not allocate device\n");
 			err = -ENOMEM;
 			goto error;
 		}
@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
 		sdev->dev = dev;
 		err = device_register(dev);
 		if (err) {
-			ssb_printk(KERN_ERR PFX
-				   "Could not register %s\n",
-				   dev_name(dev));
+			ssb_err("Could not register %s\n", dev_name(dev));
 			/* Set dev to NULL to not unregister
 			 * dev on error unwinding. */
 			sdev->dev = NULL;
@@ -557,6 +553,14 @@ static int ssb_devices_register(struct s
 	}
 #endif
 
+#ifdef CONFIG_SSB_SFLASH
+	if (bus->mipscore.sflash.present) {
+		err = platform_device_register(&ssb_sflash_dev);
+		if (err)
+			pr_err("Error registering serial flash\n");
+	}
+#endif
+
 	return 0;
 error:
 	/* Unwind the already registered devices. */
@@ -825,10 +829,9 @@ static int ssb_bus_register(struct ssb_b
 	ssb_mipscore_init(&bus->mipscore);
 	err = ssb_gpio_init(bus);
 	if (err == -ENOTSUPP)
-		ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
+		ssb_dbg("GPIO driver not activated\n");
 	else if (err)
-		ssb_dprintk(KERN_ERR PFX
-			   "Error registering GPIO driver: %i\n", err);
+		ssb_dbg("Error registering GPIO driver: %i\n", err);
 	err = ssb_fetch_invariants(bus, get_invariants);
 	if (err) {
 		ssb_bus_may_powerdown(bus);
@@ -878,11 +881,11 @@ int ssb_bus_pcibus_register(struct ssb_b
 
 	err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 	if (!err) {
-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-			   "PCI device %s\n", dev_name(&host_pci->dev));
+		ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
+			 dev_name(&host_pci->dev));
 	} else {
-		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
-			   " of SSB with error %d\n", err);
+		ssb_err("Failed to register PCI version of SSB with error %d\n",
+			err);
 	}
 
 	return err;
@@ -903,8 +906,8 @@ int ssb_bus_pcmciabus_register(struct ss
 
 	err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 	if (!err) {
-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-			   "PCMCIA device %s\n", pcmcia_dev->devname);
+		ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+			 pcmcia_dev->devname);
 	}
 
 	return err;
@@ -925,8 +928,8 @@ int ssb_bus_sdiobus_register(struct ssb_
 
 	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
 	if (!err) {
-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
-			   "SDIO device %s\n", sdio_func_id(func));
+		ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
+			 sdio_func_id(func));
 	}
 
 	return err;
@@ -944,8 +947,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
 
 	err = ssb_bus_register(bus, get_invariants, baseaddr);
 	if (!err) {
-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
-			   "address 0x%08lX\n", baseaddr);
+		ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+			 baseaddr);
 	}
 
 	return err;
@@ -1339,7 +1342,7 @@ out:
 #endif
 	return err;
 error:
-	ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
+	ssb_err("Bus powerdown failed\n");
 	goto out;
 }
 EXPORT_SYMBOL(ssb_bus_may_powerdown);
@@ -1362,7 +1365,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
 
 	return 0;
 error:
-	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
+	ssb_err("Bus powerup failed\n");
 	return err;
 }
 EXPORT_SYMBOL(ssb_bus_powerup);
@@ -1470,15 +1473,13 @@ static int __init ssb_modinit(void)
 
 	err = b43_pci_ssb_bridge_init();
 	if (err) {
-		ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
-			   "initialization failed\n");
+		ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
 	err = ssb_gige_init();
 	if (err) {
-		ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
-			   "driver initialization failed\n");
+		ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
 	}
 	return 0;
 error:
-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+	ssb_err("Failed to switch to core %u\n", coreidx);
 	return -ENODEV;
 }
 
@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
 	unsigned long flags;
 
 #if SSB_VERBOSE_PCICORESWITCH_DEBUG
-	ssb_printk(KERN_INFO PFX
-		   "Switching to %s core, index %d\n",
-		   ssb_core_name(dev->id.coreid),
-		   dev->core_index);
+	ssb_info("Switching to %s core, index %d\n",
+		 ssb_core_name(dev->id.coreid),
+		 dev->core_index);
 #endif
 
 	spin_lock_irqsave(&bus->bar_lock, flags);
@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
 	return t[crc ^ data];
 }
 
+static void sprom_get_mac(char *mac, const u16 *in)
+{
+	int i;
+	for (i = 0; i < 3; i++) {
+		*mac++ = in[i] >> 8;
+		*mac++ = in[i];
+	}
+}
+
 static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
 {
 	int word;
@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
 	u32 spromctl;
 	u16 size = bus->sprom_size;
 
-	ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
 	if (err)
 		goto err_ctlreg;
@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
 	if (err)
 		goto err_ctlreg;
-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
+	ssb_notice("[ 0%%");
 	msleep(500);
 	for (i = 0; i < size; i++) {
 		if (i == size / 4)
-			ssb_printk("25%%");
+			ssb_cont("25%%");
 		else if (i == size / 2)
-			ssb_printk("50%%");
+			ssb_cont("50%%");
 		else if (i == (size * 3) / 4)
-			ssb_printk("75%%");
+			ssb_cont("75%%");
 		else if (i % 2)
-			ssb_printk(".");
+			ssb_cont(".");
 		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
 		mmiowb();
 		msleep(20);
@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
 	if (err)
 		goto err_ctlreg;
 	msleep(500);
-	ssb_printk("100%% ]\n");
-	ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+	ssb_cont("100%% ]\n");
+	ssb_notice("SPROM written\n");
 
 	return 0;
 err_ctlreg:
-	ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
+	ssb_err("Could not access SPROM control register.\n");
 	return err;
 }
 
@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
 	return (s8)gain;
 }
 
+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
+{
+	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
+	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
+	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
+	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
+	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
+	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
+	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
+	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
+	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
+	     SSB_SPROM2_MAXP_A_LO_SHIFT);
+}
+
 static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
 {
-	int i;
-	u16 v;
 	u16 loc[3];
 
 	if (out->revision == 3)			/* rev 3 moved MAC */
@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
 		loc[1] = SSB_SPROM1_ET0MAC;
 		loc[2] = SSB_SPROM1_ET1MAC;
 	}
-	for (i = 0; i < 3; i++) {
-		v = in[SPOFF(loc[0]) + i];
-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-	}
+	sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
 	if (out->revision < 3) { 	/* only rev 1-2 have et0, et1 */
-		for (i = 0; i < 3; i++) {
-			v = in[SPOFF(loc[1]) + i];
-			*(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
-		}
-		for (i = 0; i < 3; i++) {
-			v = in[SPOFF(loc[2]) + i];
-			*(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
-		}
+		sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
+		sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
 	}
 	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
 	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
 	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
 	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
 	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
 	if (out->revision == 1)
 		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
 		     SSB_SPROM1_BINF_CCODE_SHIFT);
@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
 	     SSB_SPROM1_ITSSI_A_SHIFT);
 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-	if (out->revision >= 2)
-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+
 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
 
@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
 						    SSB_SPROM1_AGAIN_A,
 						    SSB_SPROM1_AGAIN_A_SHIFT);
+	if (out->revision >= 2)
+		sprom_extract_r23(out, in);
 }
 
 /* Revs 4 5 and 8 have partially shared layout */
@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
 
 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 {
-	int i;
-	u16 v;
 	u16 il0mac_offset;
 
 	if (out->revision == 4)
 		il0mac_offset = SSB_SPROM4_IL0MAC;
 	else
 		il0mac_offset = SSB_SPROM5_IL0MAC;
-	/* extract the MAC address */
-	for (i = 0; i < 3; i++) {
-		v = in[SPOFF(il0mac_offset) + i];
-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-	}
+
+	sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
+
 	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
 	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
 	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
 	SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
 	if (out->revision == 4) {
 		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
 		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
 static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
 {
 	int i;
-	u16 v, o;
+	u16 o;
 	u16 pwr_info_offset[] = {
 		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
 		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
 			ARRAY_SIZE(out->core_pwr_info));
 
 	/* extract the MAC address */
-	for (i = 0; i < 3; i++) {
-		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-	}
+	sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
+
 	SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
 	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
 	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus 
 	memset(out, 0, sizeof(*out));
 
 	out->revision = in[size - 1] & 0x00FF;
-	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
+	ssb_dbg("SPROM revision %d detected\n", out->revision);
 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
 	memset(out->et1mac, 0xFF, 6);
 
@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus 
 		 * number stored in the SPROM.
 		 * Always extract r1. */
 		out->revision = 1;
-		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+		ssb_dbg("SPROM treated as revision %d\n", out->revision);
 	}
 
 	switch (out->revision) {
@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus 
 		sprom_extract_r8(out, in);
 		break;
 	default:
-		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-			   " revision %d detected. Will extract"
-			   " v1\n", out->revision);
+		ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
+			 out->revision);
 		out->revision = 1;
 		sprom_extract_r123(out, in);
 	}
@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
 	u16 *buf;
 
 	if (!ssb_is_sprom_available(bus)) {
-		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
+		ssb_err("No SPROM available!\n");
 		return -ENODEV;
 	}
 	if (bus->chipco.dev) {	/* can be unavailable! */
@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
 	} else {
 		bus->sprom_offset = SSB_SPROM_BASE1;
 	}
-	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+	ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
 
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)
@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
 			 * available for this device in some other storage */
 			err = ssb_fill_sprom_with_fallback(bus, sprom);
 			if (err) {
-				ssb_printk(KERN_WARNING PFX "WARNING: Using"
-					   " fallback SPROM failed (err %d)\n",
-					   err);
+				ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
+					 err);
 			} else {
-				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
-					    " revision %d provided by"
-					    " platform.\n", sprom->revision);
+				ssb_dbg("Using SPROM revision %d provided by platform\n",
+					sprom->revision);
 				err = 0;
 				goto out_free;
 			}
-			ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
-				   " SPROM CRC (corrupt SPROM)\n");
+			ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
 		}
 	}
 	err = sprom_extract(bus, sprom, buf, bus->sprom_size);
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
 	struct ssb_bus *ssb = pci_get_drvdata(dev);
 	int err;
 
-	pci_set_power_state(dev, 0);
+	pci_set_power_state(dev, PCI_D0);
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
 
 	return 0;
 error:
-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+	ssb_err("Failed to switch to core %u\n", coreidx);
 	return err;
 }
 
@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
 	int err;
 
 #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
-	ssb_printk(KERN_INFO PFX
-		   "Switching to %s core, index %d\n",
-		   ssb_core_name(dev->id.coreid),
-		   dev->core_index);
+	ssb_info("Switching to %s core, index %d\n",
+		 ssb_core_name(dev->id.coreid),
+		 dev->core_index);
 #endif
 
 	err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
 
 	return 0;
 error:
-	ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
+	ssb_err("Failed to switch pcmcia segment\n");
 	return err;
 }
 
@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
 	bool failed = 0;
 	size_t size = SSB_PCMCIA_SPROM_SIZE;
 
-	ssb_printk(KERN_NOTICE PFX
-		   "Writing SPROM. Do NOT turn off the power! "
-		   "Please stand by...\n");
+	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
 	if (err) {
-		ssb_printk(KERN_NOTICE PFX
-			   "Could not enable SPROM write access.\n");
+		ssb_notice("Could not enable SPROM write access\n");
 		return -EBUSY;
 	}
-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
+	ssb_notice("[ 0%%");
 	msleep(500);
 	for (i = 0; i < size; i++) {
 		if (i == size / 4)
-			ssb_printk("25%%");
+			ssb_cont("25%%");
 		else if (i == size / 2)
-			ssb_printk("50%%");
+			ssb_cont("50%%");
 		else if (i == (size * 3) / 4)
-			ssb_printk("75%%");
+			ssb_cont("75%%");
 		else if (i % 2)
-			ssb_printk(".");
+			ssb_cont(".");
 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
 		if (err) {
-			ssb_printk(KERN_NOTICE PFX
-				   "Failed to write to SPROM.\n");
+			ssb_notice("Failed to write to SPROM\n");
 			failed = 1;
 			break;
 		}
 	}
 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
 	if (err) {
-		ssb_printk(KERN_NOTICE PFX
-			   "Could not disable SPROM write access.\n");
+		ssb_notice("Could not disable SPROM write access\n");
 		failed = 1;
 	}
 	msleep(500);
 	if (!failed) {
-		ssb_printk("100%% ]\n");
-		ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+		ssb_cont("100%% ]\n");
+		ssb_notice("SPROM written\n");
 	}
 
 	return failed ? -EBUSY : 0;
@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
 	return -ENOSPC; /* continue with next entry */
 
 error:
-	ssb_printk(KERN_ERR PFX
+	ssb_err(
 		   "PCMCIA: Failed to fetch device invariants: %s\n",
 		   error_description);
 	return -ENODEV;
@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
 	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
 				ssb_pcmcia_get_mac, sprom);
 	if (res != 0) {
-		ssb_printk(KERN_ERR PFX
+		ssb_err(
 			"PCMCIA: Failed to fetch MAC address\n");
 		return -ENODEV;
 	}
@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
 	if ((res == 0) || (res == -ENOSPC))
 		return 0;
 
-	ssb_printk(KERN_ERR PFX
+	ssb_err(
 			"PCMCIA: Failed to fetch device invariants\n");
 	return -ENODEV;
 }
@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
 
 	return 0;
 error:
-	ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
+	ssb_err("Failed to initialize PCMCIA host device\n");
 	return err;
 }
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
 		chipid_fallback = 0x4401;
 		break;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "PCI-ID not in fallback list\n");
+		ssb_err("PCI-ID not in fallback list\n");
 	}
 
 	return chipid_fallback;
@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
 	case 0x4704:
 		return 9;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "CHIPID not in nrcores fallback list\n");
+		ssb_err("CHIPID not in nrcores fallback list\n");
 	}
 
 	return 1;
@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			bus->chip_package = 0;
 		}
 	}
-	ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
-		   "package 0x%02X\n", bus->chip_id, bus->chip_rev,
-		   bus->chip_package);
+	ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
+		 bus->chip_id, bus->chip_rev, bus->chip_package);
 	if (!bus->nr_devices)
 		bus->nr_devices = chipid_to_nrcores(bus->chip_id);
 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
-		ssb_printk(KERN_ERR PFX
-			   "More than %d ssb cores found (%d)\n",
-			   SSB_MAX_NR_CORES, bus->nr_devices);
+		ssb_err("More than %d ssb cores found (%d)\n",
+			SSB_MAX_NR_CORES, bus->nr_devices);
 		goto err_unmap;
 	}
 	if (bus->bustype == SSB_BUSTYPE_SSB) {
@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			nr_80211_cores++;
 			if (nr_80211_cores > 1) {
 				if (!we_support_multiple_80211_cores(bus)) {
-					ssb_dprintk(KERN_INFO PFX "Ignoring additional "
-						    "802.11 core\n");
+					ssb_dbg("Ignoring additional 802.11 core\n");
 					continue;
 				}
 			}
@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 		case SSB_DEV_EXTIF:
 #ifdef CONFIG_SSB_DRIVER_EXTIF
 			if (bus->extif.dev) {
-				ssb_printk(KERN_WARNING PFX
-					   "WARNING: Multiple EXTIFs found\n");
+				ssb_warn("WARNING: Multiple EXTIFs found\n");
 				break;
 			}
 			bus->extif.dev = dev;
@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			break;
 		case SSB_DEV_CHIPCOMMON:
 			if (bus->chipco.dev) {
-				ssb_printk(KERN_WARNING PFX
-					   "WARNING: Multiple ChipCommon found\n");
+				ssb_warn("WARNING: Multiple ChipCommon found\n");
 				break;
 			}
 			bus->chipco.dev = dev;
@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 		case SSB_DEV_MIPS_3302:
 #ifdef CONFIG_SSB_DRIVER_MIPS
 			if (bus->mipscore.dev) {
-				ssb_printk(KERN_WARNING PFX
-					   "WARNING: Multiple MIPS cores found\n");
+				ssb_warn("WARNING: Multiple MIPS cores found\n");
 				break;
 			}
 			bus->mipscore.dev = dev;
@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 				}
 			}
 			if (bus->pcicore.dev) {
-				ssb_printk(KERN_WARNING PFX
-					   "WARNING: Multiple PCI(E) cores found\n");
+				ssb_warn("WARNING: Multiple PCI(E) cores found\n");
 				break;
 			}
 			bus->pcicore.dev = dev;
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
 	while (cnt < sprom_size_words) {
 		memcpy(tmp, dump, 4);
 		dump += 4;
-		err = strict_strtoul(tmp, 16, &parsed);
+		err = kstrtoul(tmp, 16, &parsed);
 		if (err)
 			return err;
 		sprom[cnt++] = swab16((u16)parsed);
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
 		goto out_kfree;
 	err = ssb_devices_freeze(bus, &freeze);
 	if (err) {
-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+		ssb_err("SPROM write: Could not freeze all devices\n");
 		goto out_unlock;
 	}
 	res = sprom_write(bus, sprom);
 	err = ssb_devices_thaw(&freeze);
 	if (err)
-		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+		ssb_err("SPROM write: Could not thaw all devices\n");
 out_unlock:
 	mutex_unlock(&bus->sprom_mutex);
 out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -9,16 +9,27 @@
 #define PFX	"ssb: "
 
 #ifdef CONFIG_SSB_SILENT
-# define ssb_printk(fmt, x...)	do { /* nothing */ } while (0)
+# define ssb_printk(fmt, ...)					\
+	do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
 #else
-# define ssb_printk		printk
+# define ssb_printk(fmt, ...)					\
+	printk(fmt, ##__VA_ARGS__)
 #endif /* CONFIG_SSB_SILENT */
 
+#define ssb_emerg(fmt, ...)	ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
+#define ssb_err(fmt, ...)	ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
+#define ssb_warn(fmt, ...)	ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
+#define ssb_notice(fmt, ...)	ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
+#define ssb_info(fmt, ...)	ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
+#define ssb_cont(fmt, ...)	ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
+
 /* dprintk: Debugging printk; vanishes for non-debug compilation */
 #ifdef CONFIG_SSB_DEBUG
-# define ssb_dprintk(fmt, x...)	ssb_printk(fmt , ##x)
+# define ssb_dbg(fmt, ...)					\
+	ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
 #else
-# define ssb_dprintk(fmt, x...)	do { /* nothing */ } while (0)
+# define ssb_dbg(fmt, ...)					\
+	do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
 #endif
 
 #ifdef CONFIG_SSB_DEBUG
@@ -232,6 +243,10 @@ static inline int ssb_sflash_init(struct
 extern struct platform_device ssb_pflash_dev;
 #endif
 
+#ifdef CONFIG_SSB_SFLASH
+extern struct platform_device ssb_sflash_dev;
+#endif
+
 #ifdef CONFIG_SSB_DRIVER_EXTIF
 extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
 extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -26,13 +26,14 @@ struct ssb_sprom_core_pwr_info {
 
 struct ssb_sprom {
 	u8 revision;
-	u8 il0mac[6];		/* MAC address for 802.11b/g */
-	u8 et0mac[6];		/* MAC address for Ethernet */
-	u8 et1mac[6];		/* MAC address for 802.11a */
+	u8 il0mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11b/g */
+	u8 et0mac[6] __aligned(sizeof(u16));	/* MAC address for Ethernet */
+	u8 et1mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11a */
 	u8 et0phyaddr;		/* MII address for enet0 */
 	u8 et1phyaddr;		/* MII address for enet1 */
 	u8 et0mdcport;		/* MDIO for enet0 */
 	u8 et1mdcport;		/* MDIO for enet1 */
+	u16 dev_id;		/* Device ID overriding e.g. PCI ID */
 	u16 board_rev;		/* Board revision number from SPROM. */
 	u16 board_num;		/* Board number from SPROM. */
 	u16 board_type;		/* Board type from SPROM. */
@@ -340,13 +341,61 @@ enum ssb_bustype {
 #define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
 #define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
 /* board_type */
+#define SSB_BOARD_BCM94301CB	0x0406
+#define SSB_BOARD_BCM94301MP	0x0407
+#define SSB_BOARD_BU4309	0x040A
+#define SSB_BOARD_BCM94309CB	0x040B
+#define SSB_BOARD_BCM4309MP	0x040C
+#define SSB_BOARD_BU4306	0x0416
 #define SSB_BOARD_BCM94306MP	0x0418
 #define SSB_BOARD_BCM4309G	0x0421
 #define SSB_BOARD_BCM4306CB	0x0417
-#define SSB_BOARD_BCM4309MP	0x040C
+#define SSB_BOARD_BCM94306PC	0x0425	/* pcmcia 3.3v 4306 card */
+#define SSB_BOARD_BCM94306CBSG	0x042B	/* with SiGe PA */
+#define SSB_BOARD_PCSG94306	0x042D	/* with SiGe PA */
+#define SSB_BOARD_BU4704SD	0x042E	/* with sdram */
+#define SSB_BOARD_BCM94704AGR	0x042F	/* dual 11a/11g Router */
+#define SSB_BOARD_BCM94308MP	0x0430	/* 11a-only minipci */
+#define SSB_BOARD_BU4318	0x0447
+#define SSB_BOARD_CB4318	0x0448
+#define SSB_BOARD_MPG4318	0x0449
 #define SSB_BOARD_MP4318	0x044A
-#define SSB_BOARD_BU4306	0x0416
-#define SSB_BOARD_BU4309	0x040A
+#define SSB_BOARD_SD4318	0x044B
+#define SSB_BOARD_BCM94306P	0x044C	/* with SiGe */
+#define SSB_BOARD_BCM94303MP	0x044E
+#define SSB_BOARD_BCM94306MPM	0x0450
+#define SSB_BOARD_BCM94306MPL	0x0453
+#define SSB_BOARD_PC4303	0x0454	/* pcmcia */
+#define SSB_BOARD_BCM94306MPLNA	0x0457
+#define SSB_BOARD_BCM94306MPH	0x045B
+#define SSB_BOARD_BCM94306PCIV	0x045C
+#define SSB_BOARD_BCM94318MPGH	0x0463
+#define SSB_BOARD_BU4311	0x0464
+#define SSB_BOARD_BCM94311MC	0x0465
+#define SSB_BOARD_BCM94311MCAG	0x0466
+/* 4321 boards */
+#define SSB_BOARD_BU4321	0x046B
+#define SSB_BOARD_BU4321E	0x047C
+#define SSB_BOARD_MP4321	0x046C
+#define SSB_BOARD_CB2_4321	0x046D
+#define SSB_BOARD_CB2_4321_AG	0x0066
+#define SSB_BOARD_MC4321	0x046E
+/* 4325 boards */
+#define SSB_BOARD_BCM94325DEVBU	0x0490
+#define SSB_BOARD_BCM94325BGABU	0x0491
+#define SSB_BOARD_BCM94325SDGWB	0x0492
+#define SSB_BOARD_BCM94325SDGMDL	0x04AA
+#define SSB_BOARD_BCM94325SDGMDL2	0x04C6
+#define SSB_BOARD_BCM94325SDGMDL3	0x04C9
+#define SSB_BOARD_BCM94325SDABGWBA	0x04E1
+/* 4322 boards */
+#define SSB_BOARD_BCM94322MC	0x04A4
+#define SSB_BOARD_BCM94322USB	0x04A8	/* dualband */
+#define SSB_BOARD_BCM94322HM	0x04B0
+#define SSB_BOARD_BCM94322USB2D	0x04Bf	/* single band discrete front end */
+/* 4312 boards */
+#define SSB_BOARD_BU4312	0x048A
+#define SSB_BOARD_BCM4312MCGSG	0x04B5
 /* chip_package */
 #define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
 #define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -20,6 +20,18 @@ struct ssb_pflash {
 	u32 window_size;
 };
 
+#ifdef CONFIG_SSB_SFLASH
+struct ssb_sflash {
+	bool present;
+	u32 window;
+	u32 blocksize;
+	u16 numblocks;
+	u32 size;
+
+	void *priv;
+};
+#endif
+
 struct ssb_mipscore {
 	struct ssb_device *dev;
 
@@ -27,6 +39,9 @@ struct ssb_mipscore {
 	struct ssb_serial_port serial_ports[4];
 
 	struct ssb_pflash pflash;
+#ifdef CONFIG_SSB_SFLASH
+	struct ssb_sflash sflash;
+#endif
 };
 
 extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -172,6 +172,7 @@
 #define SSB_SPROMSIZE_WORDS_R4		220
 #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
 #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+#define SSB_SPROMSIZE_WORDS_R10		230
 #define SSB_SPROM_BASE1			0x1000
 #define SSB_SPROM_BASE31		0x0800
 #define SSB_SPROM_REVISION		0x007E
@@ -289,11 +290,11 @@
 #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
 #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
+#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
+#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
 #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
 #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
 #define  SSB_SPROM4_AGAIN0_SHIFT	0
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -168,6 +168,7 @@ static void nvram_read_alpha2(const char
 static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
 					const char *prefix, bool fallback)
 {
+	nvram_read_u16(prefix, NULL, "devid", &sprom->dev_id, 0, fallback);
 	nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff, fallback);
 	nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff, fallback);
 	nvram_read_u8(prefix, NULL, "ledbh2", &sprom->gpio2, 0xff, fallback);