summaryrefslogtreecommitdiff
path: root/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
blob: 19dea170c32cbdf4fef64b5730ef7731df108feb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
From: Gabor Juhos <juhosg@openwrt.org>
Subject: net: phy: allow to configure AR803x PHYs via platform data

Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
 include/linux/platform_data/phy-at803x.h | 11 +++++++
 2 files changed, 67 insertions(+)
 create mode 100644 include/linux/platform_data/phy-at803x.h

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -12,12 +12,14 @@
  */
 
 #include <linux/phy.h>
+#include <linux/mdio.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>
+#include <linux/platform_data/phy-at803x.h>
 
 #define AT803X_INTR_ENABLE			0x12
 #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
@@ -45,6 +47,11 @@
 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000
 
+#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
+#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
+
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
 
@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
 struct at803x_priv {
 	bool phy_reset:1;
 	struct gpio_desc *gpiod_reset;
+	int prev_speed;
 };
 
 struct at803x_context {
@@ -277,8 +285,16 @@ does_not_require_reset_workaround:
 	return 0;
 }
 
+static void at803x_disable_smarteee(struct phy_device *phydev)
+{
+	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
+		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+}
+
 static int at803x_config_init(struct phy_device *phydev)
 {
+	struct at803x_platform_data *pdata;
 	int ret;
 
 	ret = genphy_config_init(phydev);
@@ -299,6 +315,26 @@ static int at803x_config_init(struct phy
 			return ret;
 	}
 
+	pdata = dev_get_platdata(&phydev->mdio.dev);
+	if (pdata) {
+		if (pdata->disable_smarteee)
+			at803x_disable_smarteee(phydev);
+
+		if (pdata->enable_rgmii_rx_delay)
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
+				AT803X_DEBUG_RX_CLK_DLY_EN);
+		else
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
+
+		if (pdata->enable_rgmii_tx_delay)
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+				AT803X_DEBUG_TX_CLK_DLY_EN);
+		else
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+	}
+
 	return 0;
 }
 
@@ -336,6 +372,8 @@ static int at803x_config_intr(struct phy
 static void at803x_link_change_notify(struct phy_device *phydev)
 {
 	struct at803x_priv *priv = phydev->priv;
+	struct at803x_platform_data *pdata;
+	pdata = dev_get_platdata(&phydev->mdio.dev);
 
 	/*
 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
@@ -364,6 +402,24 @@ static void at803x_link_change_notify(st
 	} else {
 		priv->phy_reset = false;
 	}
+	if (pdata && pdata->fixup_rgmii_tx_delay &&
+	    phydev->speed != priv->prev_speed) {
+		switch (phydev->speed) {
+		case SPEED_10:
+		case SPEED_100:
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+				AT803X_DEBUG_TX_CLK_DLY_EN);
+			break;
+		case SPEED_1000:
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+			break;
+		default:
+			break;
+		}
+
+		priv->prev_speed = phydev->speed;
+	}
 }
 
 static int at803x_aneg_done(struct phy_device *phydev)
--- /dev/null
+++ b/include/linux/platform_data/phy-at803x.h
@@ -0,0 +1,11 @@
+#ifndef _PHY_AT803X_PDATA_H
+#define _PHY_AT803X_PDATA_H
+
+struct at803x_platform_data {
+	int disable_smarteee:1;
+	int enable_rgmii_tx_delay:1;
+	int enable_rgmii_rx_delay:1;
+	int fixup_rgmii_tx_delay:1;
+};
+
+#endif /* _PHY_AT803X_PDATA_H */