summaryrefslogtreecommitdiff
path: root/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch
blob: a8604abff076d765a8867db281fa8eaa20d218d4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -25,6 +25,14 @@ config MACH_AVILA
 	  Avila Network Platform. For more information on this platform,
 	  see <file:Documentation/arm/IXP4xx>.
 
+config MACH_CAMBRIA
+	bool "Cambria"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the Gateworks
+	  Cambria series. For more information on this platform,
+	  see <file:Documentation/arm/IXP4xx>.
+
 config MACH_LOFT
     bool "Loft"
     depends on MACH_AVILA
@@ -222,7 +230,7 @@ config CPU_IXP46X
 
 config CPU_IXP43X
 	bool
-	depends on MACH_KIXRP435
+	depends on MACH_KIXRP435 || MACH_CAMBRIA
 	default y
 
 config MACH_GTWX5715
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -7,6 +7,7 @@ obj-pci-n	:=
 
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
+obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
@@ -31,6 +32,7 @@ obj-y	+= common.o
 
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
 obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
+obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arch/mach-ixp4xx/cambria-pci.c
+ *
+ * PCI setup routines for Gateworks Cambria series
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init cambria_pci_preinit(void)
+{
+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 2)
+		return IRQ_IXP4XX_GPIO10;
+	else if (slot == 3)
+		return IRQ_IXP4XX_GPIO9;
+	else if (slot == 4)
+		return IRQ_IXP4XX_GPIO8;
+	else if (slot == 6)
+		return IRQ_IXP4XX_GPIO10;
+	else if (slot == 15)
+		return IRQ_IXP4XX_GPIO8;
+
+	else return -1;
+}
+
+struct hw_pci cambria_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        cambria_pci_preinit,
+	.ops =            &ixp4xx_ops,
+	.setup =          ixp4xx_setup,
+	.map_irq =        cambria_map_irq,
+};
+
+int __init cambria_pci_init(void)
+{
+	if (machine_is_cambria())
+		pci_common_init(&cambria_pci);
+	return 0;
+}
+
+subsys_initcall(cambria_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
@@ -0,0 +1,993 @@
+/*
+ * arch/arm/mach-ixp4xx/cambria-setup.c
+ *
+ * Board setup for the Gateworks Cambria series
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ *         Tim Harvey <tharvey@gateworks.com>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio_buttons.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/gw_i2c_pld.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/if_ether.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/netdevice.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/socket.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
+
+#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
+
+struct cambria_board_info {
+	unsigned char	*model;
+	void		(*setup)(void);
+};
+
+static struct cambria_board_info *cambria_info __initdata;
+
+static struct flash_platform_data cambria_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource cambria_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cambria_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &cambria_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cambria_flash_resource,
+};
+
+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
+	.sda_pin	= 7,
+	.scl_pin	= 6,
+};
+
+static struct platform_device cambria_i2c_gpio = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cambria_i2c_gpio_data,
+	},
+};
+
+#ifdef SFP_SERIALID
+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
+	.sda_pin	= 113,
+	.scl_pin	= 112,
+	.sda_is_open_drain = 0,
+	.scl_is_open_drain = 0,
+};
+
+static struct platform_device cambria_i2c_gpio_sfpa = {
+	.name		= "i2c-gpio",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &cambria_i2c_gpio_sfpa_data,
+	},
+};
+
+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
+	.sda_pin	= 115,
+	.scl_pin	= 114,
+	.sda_is_open_drain = 0,
+	.scl_is_open_drain = 0,
+};
+
+static struct platform_device cambria_i2c_gpio_sfpb = {
+	.name		= "i2c-gpio",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &cambria_i2c_gpio_sfpb_data,
+	},
+};
+#endif // #ifdef SFP_SERIALID
+
+static struct eth_plat_info cambria_npec_data = {
+	.phy		= 1,
+	.rxq		= 4,
+	.txreadyq	= 21,
+};
+
+static struct eth_plat_info cambria_npea_data = {
+	.phy		= 2,
+	.rxq		= 2,
+	.txreadyq	= 19,
+};
+
+static struct platform_device cambria_npec_device = {
+	.name			= "ixp4xx_eth",
+	.id			= IXP4XX_ETH_NPEC,
+	.dev.platform_data	= &cambria_npec_data,
+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+};
+
+static struct platform_device cambria_npea_device = {
+	.name			= "ixp4xx_eth",
+	.id			= IXP4XX_ETH_NPEA,
+	.dev.platform_data	= &cambria_npea_data,
+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
+};
+
+static struct resource cambria_uart_resource = {
+	.start	= IXP4XX_UART1_BASE_PHYS,
+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port cambria_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device cambria_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data	= cambria_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cambria_uart_resource,
+};
+
+static struct resource cambria_optional_uart_resources[] = {
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x53000000,
+		.end	= 0x53000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x52000000,
+		.end	= 0x52000fff,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= 0x53000000,
+		.end	= 0x53000fff,
+		.flags	= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port cambria_optional_uart_data[] = {
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM_DELAY,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+		.rw_delay	= 10,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM_DELAY,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+		.rw_delay	= 10,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 18432000,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 18432000,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 18432000,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 18432000,
+	},
+	{
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 18432000,
+	},
+  { },
+};
+
+static struct platform_device cambria_optional_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM1,
+	.dev.platform_data	= cambria_optional_uart_data,
+	.num_resources	= 2,
+	.resource	= cambria_optional_uart_resources,
+};
+
+static struct resource cambria_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO12,
+		.end	= IRQ_IXP4XX_GPIO12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data cambria_pata_data = {
+	.cs0_bits	= 0xbfff3c03,
+	.cs1_bits	= 0xbfff3c03,
+};
+
+static struct platform_device cambria_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &cambria_pata_data,
+	.num_resources		= ARRAY_SIZE(cambria_pata_resources),
+	.resource		= cambria_pata_resources,
+};
+
+static struct gpio_led cambria_gpio_leds[] = {
+	{
+		.name		= "user",
+		.gpio		= 5,
+		.active_low 	= 1,
+	},
+	{
+		.name		= "user2",
+		.gpio		= 0,
+		.active_low 	= 1,
+	},
+	{
+		.name		= "user3",
+		.gpio		= 0,
+		.active_low 	= 1,
+	},
+	{
+		.name		= "user4",
+		.gpio		= 0,
+		.active_low 	= 1,
+	}
+};
+
+static struct gpio_led_platform_data cambria_gpio_leds_data = {
+	.num_leds	= 1,
+	.leds		= cambria_gpio_leds,
+};
+
+static struct platform_device cambria_gpio_leds_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev.platform_data = &cambria_gpio_leds_data,
+};
+
+static struct resource cambria_gpio_resources[] = {
+	{
+		.name = "gpio",
+		.flags  = 0,
+	},
+};
+
+static struct gpio cambria_gpios_gw2350[] = {
+	// ARM GPIO
+#if 0 // configured from bootloader
+	{  0, GPIOF_IN,            "ARM_DIO0" },
+	{  1, GPIOF_IN,            "ARM_DIO1" },
+	{  2, GPIOF_IN,            "ARM_DIO2" },
+	{  3, GPIOF_IN,            "ARM_DIO3" },
+	{  4, GPIOF_IN,            "ARM_DIO4" },
+	{  5, GPIOF_IN,            "ARM_DIO5" },
+	{ 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
+#endif
+	{  8, GPIOF_IN,            "ARM_DIO8" },
+	{  9, GPIOF_IN,            "ARM_DIO9" },
+};
+
+static struct gpio cambria_gpios_gw2358[] = {
+	// ARM GPIO
+#if 0 // configured from bootloader
+	{  0, GPIOF_IN,            "*VINLOW#" },
+	{  2, GPIOF_IN,            "*GPS_PPS" },
+	{  3, GPIOF_IN,            "*GPS_IRQ#" },
+	{  4, GPIOF_IN,            "*RS485_IRQ#" },
+	{  5, GPIOF_IN,            "*SER_EN#" },
+	{ 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
+#endif
+};
+
+static struct gpio cambria_gpios_gw2359[] = {
+	// ARM GPIO
+#if 0 // configured from bootloader
+	{  0, GPIOF_IN,            "*PCA_IRQ#" },
+	{  1, GPIOF_IN,            "ARM_DIO1" },
+	{  2, GPIOF_IN,            "ARM_DIO2" },
+	{  3, GPIOF_IN,            "ARM_DIO3" },
+	{  4, GPIOF_IN,            "ARM_DIO4" },
+	{  5, GPIOF_IN,            "ARM_DIO5" },
+	{  8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
+#endif
+	{ 11, GPIOF_OUT_INIT_HIGH, "*SER_EN"   },       // console serial enable
+	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
+	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
+	// GSC GPIO
+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+	{100, GPIOF_IN,            "*USER_PB#" },
+#endif
+	{103, GPIOF_OUT_INIT_HIGH, "*5V_EN" },         // 5V aux supply enable
+	{108, GPIOF_IN,            "*SMUXDA0" },
+	{109, GPIOF_IN,            "*SMUXDA1" },
+	{110, GPIOF_IN,            "*SMUXDA2" },
+	{111, GPIOF_IN,            "*SMUXDB0" },
+	{112, GPIOF_IN,            "*SMUXDB1" },
+	{113, GPIOF_IN,            "*SMUXDB2" },
+	// PCA GPIO
+	{118, GPIOF_IN,            "*USIM2_DET#"},     // USIM2 Detect
+	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCI, 0=FP)
+	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCI, 0=FP)
+	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
+	{123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" },     // J21/J10
+	{124, GPIOF_IN,            "*COM1_DSR#" },     // J21/J10
+	{127, GPIOF_IN,            "PCA_DIO0" },
+	{128, GPIOF_IN,            "PCA_DIO1" },
+	{129, GPIOF_IN,            "PCA_DIO2" },
+	{130, GPIOF_IN,            "PCA_DIO3" },
+	{131, GPIOF_IN,            "PCA_DIO4" },
+};
+
+static struct gpio cambria_gpios_gw2360[] = {
+	// ARM GPIO
+	{  0, GPIOF_IN,            "*PCA_IRQ#" },
+	{ 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
+	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
+	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
+	// GSC GPIO
+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+	{100, GPIOF_IN,            "*USER_PB#" },
+#endif
+	{108, GPIOF_OUT_INIT_LOW,  "*ENET1_EN#" },     // ENET1 TX Enable
+	{109, GPIOF_IN,            "*ENET1_PRES#" },   // ENET1 Detect (0=SFP present)
+	{110, GPIOF_OUT_INIT_LOW,  "*ENET2_EN#" },     // ENET2 TX Enable
+	{111, GPIOF_IN,            "*ENET2_PRES#"},    // ENET2 Detect (0=SFP present)
+	// PCA GPIO
+	{116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"},      // USIM2 Select (1=Loc, 0=Rem)
+	{117, GPIOF_IN,            "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
+	{118, GPIOF_IN,            "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
+	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCIe1, 0=J1)
+	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCIe2, 0=J1)
+	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
+	{127, GPIOF_IN,            "DIO0" },
+	{128, GPIOF_IN,            "DIO1" },
+	{129, GPIOF_IN,            "DIO2" },
+	{130, GPIOF_IN,            "DIO3" },
+	{131, GPIOF_IN,            "DIO4" },
+};
+
+static struct latch_led cambria_latch_leds[] = {
+	{
+		.name	= "ledA",  /* green led */
+		.bit	= 0,
+	},
+	{
+		.name	= "ledB",  /* green led */
+		.bit	= 1,
+	},
+	{
+		.name	= "ledC",  /* green led */
+		.bit	= 2,
+	},
+	{
+		.name	= "ledD",  /* green led */
+		.bit	= 3,
+	},
+	{
+		.name	= "ledE",  /* green led */
+		.bit	= 4,
+	},
+	{
+		.name	= "ledF",  /* green led */
+		.bit	= 5,
+	},
+	{
+		.name	= "ledG",  /* green led */
+		.bit	= 6,
+	},
+	{
+		.name	= "ledH",  /* green led */
+		.bit	= 7,
+	}
+};
+
+static struct latch_led_platform_data cambria_latch_leds_data = {
+	.num_leds	= 8,
+	.leds		= cambria_latch_leds,
+	.mem		= 0x53F40000,
+};
+
+static struct platform_device cambria_latch_leds_device = {
+	.name		= "leds-latch",
+	.id		= -1,
+	.dev.platform_data = &cambria_latch_leds_data,
+};
+
+static struct resource cambria_usb0_resources[] = {
+	{
+		.start	= 0xCD000000,
+		.end	= 0xCD000300,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 32,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource cambria_usb1_resources[] = {
+	{
+		.start	= 0xCE000000,
+		.end	= 0xCE000300,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 33,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dma_mask = ~(u32)0;
+
+static struct platform_device cambria_usb0_device =  {
+	.name		= "ixp4xx-ehci",
+	.id		= 0,
+	.resource	= cambria_usb0_resources,
+	.num_resources	= ARRAY_SIZE(cambria_usb0_resources),
+	.dev = {
+		.dma_mask		= &ehci_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct platform_device cambria_usb1_device = {
+	.name		= "ixp4xx-ehci",
+	.id		= 1,
+	.resource	= cambria_usb1_resources,
+	.num_resources	= ARRAY_SIZE(cambria_usb1_resources),
+	.dev = {
+		.dma_mask		= &ehci_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
+	.gpio_base	= 16,
+	.nr_gpio	= 8,
+};
+
+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
+	.gpio_base	= 24,
+	.nr_gpio	= 2,
+};
+
+
+static struct gpio_button cambria_gpio_buttons[] = {
+	{
+		.desc		= "user",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 2,
+		.gpio		= 25,
+	}
+};
+
+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
+	.poll_interval	= 500,
+	.nbuttons	= 1,
+	.buttons	= cambria_gpio_buttons,
+};
+
+static struct platform_device cambria_gpio_buttons_device = {
+	.name			= "gpio-buttons",
+	.id			= -1,
+	.dev.platform_data	= &cambria_gpio_buttons_data,
+};
+
+static struct platform_device *cambria_devices[] __initdata = {
+	&cambria_i2c_gpio,
+	&cambria_flash,
+	&cambria_uart,
+};
+
+static int cambria_register_gpio(struct gpio *array, size_t num)
+{
+	int i, err, ret;
+
+	ret = 0;
+	for (i = 0; i < num; i++, array++) {
+		const char *label = array->label;
+		if (label[0] == '*')
+			label++;
+		err = gpio_request_one(array->gpio, array->flags, label);
+		if (err)
+			ret = err;
+		else {
+			err = gpio_export(array->gpio, array->label[0] != '*');
+		}
+	}
+	return ret;
+}
+
+static void __init cambria_gw23xx_setup(void)
+{
+	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
+																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
+
+	platform_device_register(&cambria_npec_device);
+	platform_device_register(&cambria_npea_device);
+}
+
+static void __init cambria_gw2350_setup(void)
+{
+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+	cambria_optional_uart_data[0].mapbase	= 0x52FF0000;
+	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x52FF0000, 0x0fff);
+	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
+
+	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
+	cambria_optional_uart_data[1].mapbase	= 0x53FF0000;
+	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53FF0000, 0x0fff);
+	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
+
+	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
+																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
+
+	platform_device_register(&cambria_optional_uart);
+	platform_device_register(&cambria_npec_device);
+	platform_device_register(&cambria_npea_device);
+
+	platform_device_register(&cambria_usb0_device);
+	platform_device_register(&cambria_usb1_device);
+
+	platform_device_register(&cambria_gpio_leds_device);
+
+	/* gpio config (/sys/class/gpio) */
+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
+}
+
+static void __init cambria_gw2358_setup(void)
+{
+	*IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+	cambria_optional_uart_data[0].mapbase	= 0x53FC0000;
+	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x53FC0000, 0x0fff);
+	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
+
+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
+	cambria_optional_uart_data[1].mapbase	= 0x53F80000;
+	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53F80000, 0x0fff);
+	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
+
+	cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
+																		(1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
+
+	platform_device_register(&cambria_optional_uart);
+
+	platform_device_register(&cambria_npec_device);
+	platform_device_register(&cambria_npea_device);
+
+	platform_device_register(&cambria_usb0_device);
+	platform_device_register(&cambria_usb1_device);
+
+	platform_device_register(&cambria_pata);
+
+	cambria_gpio_leds[0].gpio = 24;
+	platform_device_register(&cambria_gpio_leds_device);
+
+	platform_device_register(&cambria_latch_leds_device);
+
+	platform_device_register(&cambria_gpio_buttons_device);
+
+	/* gpio config (/sys/class/gpio) */
+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
+}
+
+static void __init cambria_gw2359_setup(void)
+{
+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
+	/* The mvswitch driver has some hard-coded values which could
+	 * easily be turned into a platform resource if needed.  For now they
+	 * match our hardware configuration:
+	 *  MV_BASE    0x10 - phy base address
+	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
+	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
+	 *
+	 * The mvswitch driver registers a fixup which forces a driver match
+	 * if phy_addr matches MV_BASE
+	 *
+	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
+	 * in the other.
+	 */
+	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
+#else
+	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
+	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
+	// CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
+	cambria_npec_data.phy = 0x14;
+#endif
+	platform_device_register(&cambria_npec_device);
+	platform_device_register(&cambria_npea_device);
+
+	platform_device_register(&cambria_usb0_device);
+	platform_device_register(&cambria_usb1_device);
+
+	cambria_gpio_leds_data.num_leds = 3;
+	cambria_gpio_leds[0].name = "user1";
+	cambria_gpio_leds[0].gpio = 125; // PNLLED1#
+	cambria_gpio_leds[1].gpio = 126; // PNLLED3#
+	cambria_gpio_leds[2].gpio = 119; // PNLLED4#
+	platform_device_register(&cambria_gpio_leds_device);
+
+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+	cambria_gpio_buttons[0].gpio = 100;
+	platform_device_register(&cambria_gpio_buttons_device);
+#endif
+
+	/* gpio config (/sys/class/gpio) */
+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
+}
+
+static void __init cambria_gw2360_setup(void)
+{
+	/* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
+	 * The chip-selects are expanded via a 3-to-8 decoder and CS2
+	 * and they are 8bit devices
+	 */
+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
+	cambria_optional_uart_data[0].mapbase = 0x52000000;
+	cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
+	cambria_optional_uart_data[0].uartclk = 18432000;
+	cambria_optional_uart_data[0].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[0].irq     = IRQ_IXP4XX_GPIO2;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[1].mapbase = 0x52000008;
+	cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
+	cambria_optional_uart_data[1].uartclk = 18432000;
+	cambria_optional_uart_data[1].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[1].irq     = IRQ_IXP4XX_GPIO3;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[2].mapbase = 0x52000010;
+	cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
+	cambria_optional_uart_data[2].uartclk = 18432000;
+	cambria_optional_uart_data[2].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[2].irq     = IRQ_IXP4XX_GPIO4;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[3].mapbase = 0x52000018;
+	cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
+	cambria_optional_uart_data[3].uartclk = 18432000;
+	cambria_optional_uart_data[3].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[3].irq     = IRQ_IXP4XX_GPIO5;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[4].mapbase = 0x52000020;
+	cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
+	cambria_optional_uart_data[4].uartclk = 18432000;
+	cambria_optional_uart_data[4].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[4].irq     = IRQ_IXP4XX_GPIO8;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[5].mapbase = 0x52000028;
+	cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
+	cambria_optional_uart_data[5].uartclk = 18432000;
+	cambria_optional_uart_data[5].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[5].irq     = IRQ_IXP4XX_GPIO9;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart_data[6].mapbase = 0x52000030;
+	cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
+	cambria_optional_uart_data[6].uartclk = 18432000;
+	cambria_optional_uart_data[6].iotype  = UPIO_MEM;
+	cambria_optional_uart_data[6].irq     = IRQ_IXP4XX_GPIO10;
+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
+
+	cambria_optional_uart.num_resources   = 7,
+	platform_device_register(&cambria_optional_uart);
+
+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
+	/* The mvswitch driver has some hard-coded values which could
+	 * easily be turned into a platform resource if needed.  For now they
+	 * match our hardware configuration:
+	 *  MV_BASE    0x10 - phy base address
+	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
+	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
+	 *
+	 * The mvswitch driver registers a fixup which forces a driver match
+	 * if phy_addr matches MV_BASE
+	 *
+	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
+	 * in the other.
+	 */
+	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
+#else
+	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
+	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
+#endif
+
+	// disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
+	//cambria_npec_data.noautoneg = 1;   // disable autoneg
+	cambria_npec_data.speed_10 = 0;    // 100mbps
+	cambria_npec_data.half_duplex = 0; // full-duplex
+	platform_device_register(&cambria_npec_device);
+	platform_device_register(&cambria_npea_device);
+
+	platform_device_register(&cambria_usb0_device);
+	platform_device_register(&cambria_usb1_device);
+
+	cambria_gpio_leds_data.num_leds = 3;
+	cambria_gpio_leds[0].name = "user1";
+	cambria_gpio_leds[0].gpio = 125;
+	cambria_gpio_leds[1].gpio = 126;
+	cambria_gpio_leds[2].gpio = 119;
+	platform_device_register(&cambria_gpio_leds_device);
+
+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+	cambria_gpio_buttons[0].gpio = 100;
+	platform_device_register(&cambria_gpio_buttons_device);
+#endif
+
+#ifdef SFP_SERIALID
+	/* the SFP modules each have an i2c bus for serial ident via GSC GPIO
+	 * To use these the i2c-gpio driver must be changed to use the _cansleep
+	 * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
+	 * use that anyway as it doesn't operate in an IRQ context).
+	 * Additionally the i2c-gpio module must set the gpio to output-high prior
+	 * to changing direction to an input to enable internal Pullups
+	 */
+	platform_device_register(&cambria_i2c_gpio_sfpa);
+	platform_device_register(&cambria_i2c_gpio_sfpb);
+#endif
+
+	/* gpio config (/sys/class/gpio) */
+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
+}
+
+static struct cambria_board_info cambria_boards[] __initdata = {
+	{
+		.model	= "GW2350",
+		.setup	= cambria_gw2350_setup,
+	}, {
+		.model	= "GW2351",
+		.setup	= cambria_gw2350_setup,
+	}, {
+		.model	= "GW2358",
+		.setup	= cambria_gw2358_setup,
+	}, {
+		.model	= "GW2359",
+		.setup	= cambria_gw2359_setup,
+	}, {
+		.model	= "GW2360",
+		.setup	= cambria_gw2360_setup,
+	}, {
+		.model	= "GW2371",
+		.setup	= cambria_gw2358_setup,
+	}
+};
+
+static struct cambria_board_info * __init cambria_find_board_info(char *model)
+{
+	int i;
+	model[6] = '\0';
+
+	for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
+		struct cambria_board_info *info = &cambria_boards[i];
+		if (strcmp(info->model, model) == 0)
+			return info;
+	}
+
+	return NULL;
+}
+
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+	char mac_addr[ETH_ALEN];
+	char model[7];
+
+	at24_mem_acc = mem_acc;
+
+	/* Read MAC addresses */
+	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
+		memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
+	}
+	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
+		memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
+	}
+
+	/* Read the first 6 bytes of the model number */
+	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
+		cambria_info = cambria_find_board_info(model);
+	}
+
+}
+
+static struct at24_platform_data cambria_eeprom_info = {
+	.byte_len	= 1024,
+	.page_size	= 16,
+	.flags		= AT24_FLAG_READONLY,
+	.setup		= at24_setup,
+};
+
+static struct pca953x_platform_data cambria_pca_data = {
+	.gpio_base = 100,
+	.irq_base = -1,
+};
+
+static struct pca953x_platform_data cambria_pca2_data = {
+	.gpio_base = 116,
+	.irq_base = -1,
+};
+
+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x23),
+		.platform_data = &cambria_pca_data,
+	},
+	{
+		I2C_BOARD_INFO("pca9555", 0x27),
+		.platform_data = &cambria_pca2_data,
+	},
+	{
+		I2C_BOARD_INFO("ds1672", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("gsp", 0x29),
+	},
+	{
+		I2C_BOARD_INFO("ad7418", 0x28),
+	},
+	{
+		I2C_BOARD_INFO("24c08", 0x51),
+		.platform_data	= &cambria_eeprom_info
+	},
+	{
+		I2C_BOARD_INFO("gw_i2c_pld", 0x56),
+		.platform_data	= &gw_i2c_pld_data0,
+	},
+	{
+		I2C_BOARD_INFO("gw_i2c_pld", 0x57),
+		.platform_data	= &gw_i2c_pld_data1,
+	},
+};
+
+static void __init cambria_init(void)
+{
+	ixp4xx_sys_init();
+
+	cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
+
+	cambria_pata_resources[0].start = 0x53e00000;
+	cambria_pata_resources[0].end = 0x53e3ffff;
+
+	cambria_pata_resources[1].start = 0x53e40000;
+	cambria_pata_resources[1].end = 0x53e7ffff;
+
+	cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
+	cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
+}
+
+static int __init cambria_model_setup(void)
+{
+	if (!machine_is_cambria())
+		return 0;
+
+	if (cambria_info) {
+		printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
+				cambria_info->model);
+		cambria_info->setup();
+	} else {
+		printk(KERN_INFO "Unknown/missing Cambria model number"
+				" -- defaults will be used\n");
+		cambria_gw23xx_setup();
+	}
+
+	return 0;
+}
+late_initcall(cambria_model_setup);
+
+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.init_time	= ixp4xx_timer_init,
+	.atag_offset	= 0x0100,
+	.init_machine	= cambria_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
+	.restart	= ixp4xx_restart,
+MACHINE_END