summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches-3.2/0008-MIPS-lantiq-add-basic-support-for-FALC-ON.patch
blob: 72b0fa7438cfad36bbeeff41e76f29634897c970 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
From d54a53bc8bc25bf2f9076013f89b30cb9103f99f Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 11 Aug 2011 14:33:04 +0200
Subject: [PATCH 08/70] MIPS: lantiq: add basic support for FALC-ON

Adds support for the FALC-ON SoC. This SoC is from the FTTH/GPON SoC family.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
 .../include/asm/mach-lantiq/falcon/falcon_irq.h    |  268 ++++++++++++++++++++
 arch/mips/include/asm/mach-lantiq/falcon/irq.h     |   18 ++
 .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |  143 +++++++++++
 arch/mips/include/asm/mach-lantiq/lantiq.h         |    1 +
 arch/mips/lantiq/Kconfig                           |    4 +
 arch/mips/lantiq/Makefile                          |    1 +
 arch/mips/lantiq/Platform                          |    1 +
 arch/mips/lantiq/falcon/Makefile                   |    1 +
 arch/mips/lantiq/falcon/clk.c                      |   44 ++++
 arch/mips/lantiq/falcon/devices.c                  |   87 +++++++
 arch/mips/lantiq/falcon/devices.h                  |   18 ++
 arch/mips/lantiq/falcon/prom.c                     |   93 +++++++
 arch/mips/lantiq/falcon/reset.c                    |   87 +++++++
 arch/mips/lantiq/falcon/sysctrl.c                  |  183 +++++++++++++
 14 files changed, 949 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
 create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/irq.h
 create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
 create mode 100644 arch/mips/lantiq/falcon/Makefile
 create mode 100644 arch/mips/lantiq/falcon/clk.c
 create mode 100644 arch/mips/lantiq/falcon/devices.c
 create mode 100644 arch/mips/lantiq/falcon/devices.h
 create mode 100644 arch/mips/lantiq/falcon/prom.c
 create mode 100644 arch/mips/lantiq/falcon/reset.c
 create mode 100644 arch/mips/lantiq/falcon/sysctrl.c

diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
new file mode 100644
index 0000000..4dc6466
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
@@ -0,0 +1,268 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#ifndef _FALCON_IRQ__
+#define _FALCON_IRQ__
+
+#define INT_NUM_IRQ0			8
+#define INT_NUM_IM0_IRL0		(INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0		(INT_NUM_IM0_IRL0 + 32)
+#define INT_NUM_IM2_IRL0		(INT_NUM_IM1_IRL0 + 32)
+#define INT_NUM_IM3_IRL0		(INT_NUM_IM2_IRL0 + 32)
+#define INT_NUM_IM4_IRL0		(INT_NUM_IM3_IRL0 + 32)
+#define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
+#define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define MIPS_CPU_TIMER_IRQ			7
+
+/* HOST IF Event Interrupt */
+#define FALCON_IRQ_HOST				(INT_NUM_IM0_IRL0 + 0)
+/* HOST IF Mailbox0 Receive Interrupt */
+#define FALCON_IRQ_HOST_MB0_RX			(INT_NUM_IM0_IRL0 + 1)
+/* HOST IF Mailbox0 Transmit Interrupt */
+#define FALCON_IRQ_HOST_MB0_TX			(INT_NUM_IM0_IRL0 + 2)
+/* HOST IF Mailbox1 Receive Interrupt */
+#define FALCON_IRQ_HOST_MB1_RX			(INT_NUM_IM0_IRL0 + 3)
+/* HOST IF Mailbox1 Transmit Interrupt */
+#define FALCON_IRQ_HOST_MB1_TX			(INT_NUM_IM0_IRL0 + 4)
+/* I2C Last Single Data Transfer Request */
+#define FALCON_IRQ_I2C_LSREQ			(INT_NUM_IM0_IRL0 + 8)
+/* I2C Single Data Transfer Request */
+#define FALCON_IRQ_I2C_SREQ			(INT_NUM_IM0_IRL0 + 9)
+/* I2C Last Burst Data Transfer Request */
+#define FALCON_IRQ_I2C_LBREQ			(INT_NUM_IM0_IRL0 + 10)
+/* I2C Burst Data Transfer Request */
+#define FALCON_IRQ_I2C_BREQ			(INT_NUM_IM0_IRL0 + 11)
+/* I2C Error Interrupt */
+#define FALCON_IRQ_I2C_I2C_ERR			(INT_NUM_IM0_IRL0 + 12)
+/* I2C Protocol Interrupt */
+#define FALCON_IRQ_I2C_I2C_P			(INT_NUM_IM0_IRL0 + 13)
+/* SSC Transmit Interrupt */
+#define FALCON_IRQ_SSC_T			(INT_NUM_IM0_IRL0 + 14)
+/* SSC Receive Interrupt */
+#define FALCON_IRQ_SSC_R			(INT_NUM_IM0_IRL0 + 15)
+/* SSC Error Interrupt */
+#define FALCON_IRQ_SSC_E			(INT_NUM_IM0_IRL0 + 16)
+/* SSC Frame Interrupt */
+#define FALCON_IRQ_SSC_F			(INT_NUM_IM0_IRL0 + 17)
+/* Advanced Encryption Standard Interrupt */
+#define FALCON_IRQ_AES_AES			(INT_NUM_IM0_IRL0 + 27)
+/* Secure Hash Algorithm Interrupt */
+#define FALCON_IRQ_SHA_HASH			(INT_NUM_IM0_IRL0 + 28)
+/* PCM Receive Interrupt */
+#define FALCON_IRQ_PCM_RX			(INT_NUM_IM0_IRL0 + 29)
+/* PCM Transmit Interrupt */
+#define FALCON_IRQ_PCM_TX			(INT_NUM_IM0_IRL0 + 30)
+/* PCM Transmit Crash Interrupt */
+#define FALCON_IRQ_PCM_HW2_CRASH		(INT_NUM_IM0_IRL0 + 31)
+
+/* EBU Serial Flash Command Error */
+#define FALCON_IRQ_EBU_SF_CMDERR		(INT_NUM_IM1_IRL0 + 0)
+/* EBU Serial Flash Command Overwrite Error */
+#define FALCON_IRQ_EBU_SF_COVERR		(INT_NUM_IM1_IRL0 + 1)
+/* EBU Serial Flash Busy */
+#define FALCON_IRQ_EBU_SF_BUSY			(INT_NUM_IM1_IRL0 + 2)
+/* External Interrupt from GPIO P0 */
+#define FALCON_IRQ_GPIO_P0			(INT_NUM_IM1_IRL0 + 4)
+/* External Interrupt from GPIO P1 */
+#define FALCON_IRQ_GPIO_P1			(INT_NUM_IM1_IRL0 + 5)
+/* External Interrupt from GPIO P2 */
+#define FALCON_IRQ_GPIO_P2			(INT_NUM_IM1_IRL0 + 6)
+/* External Interrupt from GPIO P3 */
+#define FALCON_IRQ_GPIO_P3			(INT_NUM_IM1_IRL0 + 7)
+/* External Interrupt from GPIO P4 */
+#define FALCON_IRQ_GPIO_P4			(INT_NUM_IM1_IRL0 + 8)
+/* 8kHz backup interrupt derived from core-PLL */
+#define FALCON_IRQ_FSC_BKP			(INT_NUM_IM1_IRL0 + 10)
+/* FSC Timer Interrupt 0 */
+#define FALCON_IRQ_FSCT_CMP0			(INT_NUM_IM1_IRL0 + 11)
+/* FSC Timer Interrupt 1 */
+#define FALCON_IRQ_FSCT_CMP1			(INT_NUM_IM1_IRL0 + 12)
+/* 8kHz root interrupt derived from GPON interface */
+#define FALCON_IRQ_FSC_ROOT			(INT_NUM_IM1_IRL0 + 13)
+/* Time of Day */
+#define FALCON_IRQ_TOD				(INT_NUM_IM1_IRL0 + 14)
+/* PMA Interrupt from IntNode of the 200MHz Domain */
+#define FALCON_IRQ_PMA_200M			(INT_NUM_IM1_IRL0 + 15)
+/* PMA Interrupt from IntNode of the TX Clk Domain */
+#define FALCON_IRQ_PMA_TX			(INT_NUM_IM1_IRL0 + 16)
+/* PMA Interrupt from IntNode of the RX Clk Domain */
+#define FALCON_IRQ_PMA_RX			(INT_NUM_IM1_IRL0 + 17)
+/* SYS1 Interrupt */
+#define FALCON_IRQ_SYS1				(INT_NUM_IM1_IRL0 + 20)
+/* SYS GPE Interrupt */
+#define FALCON_IRQ_SYS_GPE			(INT_NUM_IM1_IRL0 + 21)
+/* Watchdog Access Error Interrupt */
+#define FALCON_IRQ_WDT_AEIR			(INT_NUM_IM1_IRL0 + 24)
+/* Watchdog Prewarning Interrupt */
+#define FALCON_IRQ_WDT_PIR			(INT_NUM_IM1_IRL0 + 25)
+/* SBIU interrupt */
+#define FALCON_IRQ_SBIU0			(INT_NUM_IM1_IRL0 + 27)
+/* FPI Bus Control Unit Interrupt */
+#define FALCON_IRQ_BCU0				(INT_NUM_IM1_IRL0 + 29)
+/* DDR Controller Interrupt */
+#define FALCON_IRQ_DDR				(INT_NUM_IM1_IRL0 + 30)
+/* Crossbar Error Interrupt */
+#define FALCON_IRQ_XBAR_ERROR			(INT_NUM_IM1_IRL0 + 31)
+
+/* ICTRLL 0 Interrupt */
+#define FALCON_IRQ_ICTRLL0			(INT_NUM_IM2_IRL0 + 0)
+/* ICTRLL 1 Interrupt */
+#define FALCON_IRQ_ICTRLL1			(INT_NUM_IM2_IRL0 + 1)
+/* ICTRLL 2 Interrupt */
+#define FALCON_IRQ_ICTRLL2			(INT_NUM_IM2_IRL0 + 2)
+/* ICTRLL 3 Interrupt */
+#define FALCON_IRQ_ICTRLL3			(INT_NUM_IM2_IRL0 + 3)
+/* OCTRLL 0 Interrupt */
+#define FALCON_IRQ_OCTRLL0			(INT_NUM_IM2_IRL0 + 4)
+/* OCTRLL 1 Interrupt */
+#define FALCON_IRQ_OCTRLL1			(INT_NUM_IM2_IRL0 + 5)
+/* OCTRLL 2 Interrupt */
+#define FALCON_IRQ_OCTRLL2			(INT_NUM_IM2_IRL0 + 6)
+/* OCTRLL 3 Interrupt */
+#define FALCON_IRQ_OCTRLL3			(INT_NUM_IM2_IRL0 + 7)
+/* OCTRLG Interrupt */
+#define FALCON_IRQ_OCTRLG			(INT_NUM_IM2_IRL0 + 9)
+/* IQM Interrupt */
+#define FALCON_IRQ_IQM				(INT_NUM_IM2_IRL0 + 10)
+/* FSQM Interrupt */
+#define FALCON_IRQ_FSQM				(INT_NUM_IM2_IRL0 + 11)
+/* TMU Interrupt */
+#define FALCON_IRQ_TMU				(INT_NUM_IM2_IRL0 + 12)
+/* LINK1 Interrupt */
+#define FALCON_IRQ_LINK1			(INT_NUM_IM2_IRL0 + 14)
+/* ICTRLC 0 Interrupt */
+#define FALCON_IRQ_ICTRLC0			(INT_NUM_IM2_IRL0 + 16)
+/* ICTRLC 1 Interrupt */
+#define FALCON_IRQ_ICTRLC1			(INT_NUM_IM2_IRL0 + 17)
+/* OCTRLC Interrupt */
+#define FALCON_IRQ_OCTRLC			(INT_NUM_IM2_IRL0 + 18)
+/* CONFIG Break Interrupt */
+#define FALCON_IRQ_CONFIG_BREAK			(INT_NUM_IM2_IRL0 + 19)
+/* CONFIG Interrupt */
+#define FALCON_IRQ_CONFIG			(INT_NUM_IM2_IRL0 + 20)
+/* Dispatcher Interrupt */
+#define FALCON_IRQ_DISP				(INT_NUM_IM2_IRL0 + 21)
+/* TBM Interrupt */
+#define FALCON_IRQ_TBM				(INT_NUM_IM2_IRL0 + 22)
+/* GTC Downstream Interrupt */
+#define FALCON_IRQ_GTC_DS			(INT_NUM_IM2_IRL0 + 29)
+/* GTC Upstream Interrupt */
+#define FALCON_IRQ_GTC_US			(INT_NUM_IM2_IRL0 + 30)
+/* EIM Interrupt */
+#define FALCON_IRQ_EIM				(INT_NUM_IM2_IRL0 + 31)
+
+/* ASC0 Transmit Interrupt */
+#define FALCON_IRQ_ASC0_T			(INT_NUM_IM3_IRL0 + 0)
+/* ASC0 Receive Interrupt */
+#define FALCON_IRQ_ASC0_R			(INT_NUM_IM3_IRL0 + 1)
+/* ASC0 Error Interrupt */
+#define FALCON_IRQ_ASC0_E			(INT_NUM_IM3_IRL0 + 2)
+/* ASC0 Transmit Buffer Interrupt */
+#define FALCON_IRQ_ASC0_TB			(INT_NUM_IM3_IRL0 + 3)
+/* ASC0 Autobaud Start Interrupt */
+#define FALCON_IRQ_ASC0_ABST			(INT_NUM_IM3_IRL0 + 4)
+/* ASC0 Autobaud Detection Interrupt */
+#define FALCON_IRQ_ASC0_ABDET			(INT_NUM_IM3_IRL0 + 5)
+/* ASC1 Modem Status Interrupt */
+#define FALCON_IRQ_ASC0_MS			(INT_NUM_IM3_IRL0 + 6)
+/* ASC0 Soft Flow Control Interrupt */
+#define FALCON_IRQ_ASC0_SFC			(INT_NUM_IM3_IRL0 + 7)
+/* ASC1 Transmit Interrupt */
+#define FALCON_IRQ_ASC1_T			(INT_NUM_IM3_IRL0 + 8)
+/* ASC1 Receive Interrupt */
+#define FALCON_IRQ_ASC1_R			(INT_NUM_IM3_IRL0 + 9)
+/* ASC1 Error Interrupt */
+#define FALCON_IRQ_ASC1_E			(INT_NUM_IM3_IRL0 + 10)
+/* ASC1 Transmit Buffer Interrupt */
+#define FALCON_IRQ_ASC1_TB			(INT_NUM_IM3_IRL0 + 11)
+/* ASC1 Autobaud Start Interrupt */
+#define FALCON_IRQ_ASC1_ABST			(INT_NUM_IM3_IRL0 + 12)
+/* ASC1 Autobaud Detection Interrupt */
+#define FALCON_IRQ_ASC1_ABDET			(INT_NUM_IM3_IRL0 + 13)
+/* ASC1 Modem Status Interrupt */
+#define FALCON_IRQ_ASC1_MS			(INT_NUM_IM3_IRL0 + 14)
+/* ASC1 Soft Flow Control Interrupt */
+#define FALCON_IRQ_ASC1_SFC			(INT_NUM_IM3_IRL0 + 15)
+/* GPTC Timer/Counter 1A Interrupt */
+#define FALCON_IRQ_GPTC_TC1A			(INT_NUM_IM3_IRL0 + 16)
+/* GPTC Timer/Counter 1B Interrupt */
+#define FALCON_IRQ_GPTC_TC1B			(INT_NUM_IM3_IRL0 + 17)
+/* GPTC Timer/Counter 2A Interrupt */
+#define FALCON_IRQ_GPTC_TC2A			(INT_NUM_IM3_IRL0 + 18)
+/* GPTC Timer/Counter 2B Interrupt */
+#define FALCON_IRQ_GPTC_TC2B			(INT_NUM_IM3_IRL0 + 19)
+/* GPTC Timer/Counter 3A Interrupt */
+#define FALCON_IRQ_GPTC_TC3A			(INT_NUM_IM3_IRL0 + 20)
+/* GPTC Timer/Counter 3B Interrupt */
+#define FALCON_IRQ_GPTC_TC3B			(INT_NUM_IM3_IRL0 + 21)
+/* DFEV0, Channel 1 Transmit Interrupt */
+#define FALCON_IRQ_DFEV0_2TX			(INT_NUM_IM3_IRL0 + 26)
+/* DFEV0, Channel 1 Receive Interrupt */
+#define FALCON_IRQ_DFEV0_2RX			(INT_NUM_IM3_IRL0 + 27)
+/* DFEV0, Channel 1 General Purpose Interrupt */
+#define FALCON_IRQ_DFEV0_2GP			(INT_NUM_IM3_IRL0 + 28)
+/* DFEV0, Channel 0 Transmit Interrupt */
+#define FALCON_IRQ_DFEV0_1TX			(INT_NUM_IM3_IRL0 + 29)
+/* DFEV0, Channel 0 Receive Interrupt */
+#define FALCON_IRQ_DFEV0_1RX			(INT_NUM_IM3_IRL0 + 30)
+/* DFEV0, Channel 0 General Purpose Interrupt */
+#define FALCON_IRQ_DFEV0_1GP			(INT_NUM_IM3_IRL0 + 31)
+
+/* ICTRLL 0 Error */
+#define FALCON_IRQ_ICTRLL0_ERR			(INT_NUM_IM4_IRL0 + 0)
+/* ICTRLL 1 Error */
+#define FALCON_IRQ_ICTRLL1_ERR			(INT_NUM_IM4_IRL0 + 1)
+/* ICTRLL 2 Error */
+#define FALCON_IRQ_ICTRLL2_ERR			(INT_NUM_IM4_IRL0 + 2)
+/* ICTRLL 3 Error */
+#define FALCON_IRQ_ICTRLL3_ERR			(INT_NUM_IM4_IRL0 + 3)
+/* OCTRLL 0 Error */
+#define FALCON_IRQ_OCTRLL0_ERR			(INT_NUM_IM4_IRL0 + 4)
+/* OCTRLL 1 Error */
+#define FALCON_IRQ_OCTRLL1_ERR			(INT_NUM_IM4_IRL0 + 5)
+/* OCTRLL 2 Error */
+#define FALCON_IRQ_OCTRLL2_ERR			(INT_NUM_IM4_IRL0 + 6)
+/* OCTRLL 3 Error */
+#define FALCON_IRQ_OCTRLL3_ERR			(INT_NUM_IM4_IRL0 + 7)
+/* ICTRLG Error */
+#define FALCON_IRQ_ICTRLG_ERR			(INT_NUM_IM4_IRL0 + 8)
+/* OCTRLG Error */
+#define FALCON_IRQ_OCTRLG_ERR			(INT_NUM_IM4_IRL0 + 9)
+/* IQM Error */
+#define FALCON_IRQ_IQM_ERR			(INT_NUM_IM4_IRL0 + 10)
+/* FSQM Error */
+#define FALCON_IRQ_FSQM_ERR			(INT_NUM_IM4_IRL0 + 11)
+/* TMU Error */
+#define FALCON_IRQ_TMU_ERR			(INT_NUM_IM4_IRL0 + 12)
+/* MPS Status Interrupt #0 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR0			(INT_NUM_IM4_IRL0 + 14)
+/* MPS Status Interrupt #1 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR1			(INT_NUM_IM4_IRL0 + 15)
+/* MPS Status Interrupt #2 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR2			(INT_NUM_IM4_IRL0 + 16)
+/* MPS Status Interrupt #3 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR3			(INT_NUM_IM4_IRL0 + 17)
+/* MPS Status Interrupt #4 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR4			(INT_NUM_IM4_IRL0 + 18)
+/* MPS Status Interrupt #5 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR5			(INT_NUM_IM4_IRL0 + 19)
+/* MPS Status Interrupt #6 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR6			(INT_NUM_IM4_IRL0 + 20)
+/* MPS Status Interrupt #7 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR7			(INT_NUM_IM4_IRL0 + 21)
+/* MPS Status Interrupt #8 (VPE1 to VPE0) */
+#define FALCON_IRQ_MPS_IR8			(INT_NUM_IM4_IRL0 + 22)
+/* VPE0 Exception Level Flag Interrupt */
+#define FALCON_IRQ_VPE0_EXL			(INT_NUM_IM4_IRL0 + 29)
+/* VPE0 Error Level Flag Interrupt */
+#define FALCON_IRQ_VPE0_ERL			(INT_NUM_IM4_IRL0 + 30)
+/* VPE0 Performance Monitoring Counter Interrupt */
+#define FALCON_IRQ_VPE0_PMCIR			(INT_NUM_IM4_IRL0 + 31)
+
+#endif /* _FALCON_IRQ__ */
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
new file mode 100644
index 0000000..2caccd9
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#ifndef __FALCON_IRQ_H
+#define __FALCON_IRQ_H
+
+#include <falcon_irq.h>
+
+#define NR_IRQS 328
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
new file mode 100644
index 0000000..b074748
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_FALCON_H__
+#define _LTQ_FALCON_H__
+
+#ifdef CONFIG_SOC_FALCON
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_FALCON		0x01B8
+
+/* SoC Types */
+#define SOC_TYPE_FALCON		0x01
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR	0x1E100C00
+#define LTQ_ASC1_BASE_ADDR	0x1E100B00
+#define LTQ_ASC_SIZE		0x100
+
+#define LTQ_ASC_TIR(x)          (INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x)          (INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x)          (INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+/*
+ * during early_printk no ioremap possible at this early stage
+ * lets use KSEG1 instead
+ */
+#define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR	0x1F880200
+#define LTQ_ICU_SIZE		0x100
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR	0x1F8803F0
+#define LTQ_WDT_SIZE		0x10
+
+#define LTQ_RST_CAUSE_WDTRST	0x0002
+
+/* EBU - external bus unit */
+#define LTQ_EBU_BASE_ADDR       0x18000000
+#define LTQ_EBU_SIZE            0x0100
+
+#define LTQ_EBU_MODCON  0x000C
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR     0x1D810000
+#define LTQ_GPIO0_SIZE          0x0080
+#define LTQ_GPIO1_BASE_ADDR     0x1E800100
+#define LTQ_GPIO1_SIZE          0x0080
+#define LTQ_GPIO2_BASE_ADDR     0x1D810100
+#define LTQ_GPIO2_SIZE          0x0080
+#define LTQ_GPIO3_BASE_ADDR     0x1E800200
+#define LTQ_GPIO3_SIZE          0x0080
+#define LTQ_GPIO4_BASE_ADDR     0x1E800300
+#define LTQ_GPIO4_SIZE          0x0080
+#define LTQ_PADCTRL0_BASE_ADDR  0x1DB01000
+#define LTQ_PADCTRL0_SIZE       0x0100
+#define LTQ_PADCTRL1_BASE_ADDR  0x1E800400
+#define LTQ_PADCTRL1_SIZE       0x0100
+#define LTQ_PADCTRL2_BASE_ADDR  0x1DB02000
+#define LTQ_PADCTRL2_SIZE       0x0100
+#define LTQ_PADCTRL3_BASE_ADDR  0x1E800500
+#define LTQ_PADCTRL3_SIZE       0x0100
+#define LTQ_PADCTRL4_BASE_ADDR  0x1E800600
+#define LTQ_PADCTRL4_SIZE       0x0100
+
+/* CHIP ID */
+#define LTQ_STATUS_BASE_ADDR	0x1E802000
+
+#define LTQ_FALCON_CHIPID	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c))
+#define LTQ_FALCON_CHIPTYPE	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38))
+#define LTQ_FALCON_CHIPCONF	((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40))
+
+/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */
+#define LTQ_SYS1_BASE_ADDR      0x1EF00000
+#define LTQ_SYS1_SIZE           0x0100
+#define LTQ_STATUS_BASE_ADDR	0x1E802000
+#define LTQ_STATUS_SIZE		0x0080
+#define LTQ_SYS_ETH_BASE_ADDR	0x1DB00000
+#define LTQ_SYS_ETH_SIZE	0x0100
+#define LTQ_SYS_GPE_BASE_ADDR	0x1D700000
+#define LTQ_SYS_GPE_SIZE	0x0100
+
+#define SYSCTL_SYS1		0
+#define SYSCTL_SYSETH		1
+#define SYSCTL_SYSGPE		2
+
+/* Activation Status Register */
+#define ACTS_ASC1_ACT	0x00000800
+#define ACTS_P0		0x00010000
+#define ACTS_P1		0x00010000
+#define ACTS_P2		0x00020000
+#define ACTS_P3		0x00020000
+#define ACTS_P4		0x00040000
+#define ACTS_PADCTRL0	0x00100000
+#define ACTS_PADCTRL1	0x00100000
+#define ACTS_PADCTRL2	0x00200000
+#define ACTS_PADCTRL3	0x00200000
+#define ACTS_PADCTRL4	0x00400000
+
+extern void ltq_sysctl_activate(int module, unsigned int mask);
+extern void ltq_sysctl_deactivate(int module, unsigned int mask);
+extern void ltq_sysctl_clken(int module, unsigned int mask);
+extern void ltq_sysctl_clkdis(int module, unsigned int mask);
+extern void ltq_sysctl_reboot(int module, unsigned int mask);
+extern int ltq_gpe_is_activated(unsigned int mask);
+
+/* global register ranges */
+extern __iomem void *ltq_ebu_membase;
+extern __iomem void *ltq_sys1_membase;
+#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+#define ltq_ebu_w32_mask(clear, set, reg)   \
+	ltq_ebu_w32((ltq_ebu_r32(reg) & ~(clear)) | (set), reg)
+
+#define ltq_sys1_w32(x, y)	ltq_w32((x), ltq_sys1_membase + (y))
+#define ltq_sys1_r32(x)		ltq_r32(ltq_sys1_membase + (x))
+#define ltq_sys1_w32_mask(clear, set, reg)   \
+	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
+
+/* gpio_request wrapper to help configure the pin */
+extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
+				unsigned int dir, const char *name);
+extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
+
+/* to keep the irq code generic we need to define these to 0 as falcon
+   has no EIU/EBU */
+#define LTQ_EIU_BASE_ADDR	0
+#define LTQ_EBU_PCC_ISTAT	0
+
+#define ltq_is_ar9()	0
+#define ltq_is_vr9()	0
+
+#endif /* CONFIG_SOC_FALCON */
+#endif /* _LTQ_XWAY_H__ */
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
index 66d7300..188de0f 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -25,6 +25,7 @@ extern unsigned int ltq_get_soc_type(void);
 /* clock speeds */
 #define CLOCK_60M	60000000
 #define CLOCK_83M	83333333
+#define CLOCK_100M	100000000
 #define CLOCK_111M	111111111
 #define CLOCK_133M	133333333
 #define CLOCK_167M	166666667
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 3fccf21..cb6b39f 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -16,8 +16,12 @@ config SOC_XWAY
 	bool "XWAY"
 	select SOC_TYPE_XWAY
 	select HW_HAS_PCI
+
+config SOC_FALCON
+	bool "FALCON"
 endchoice
 
 source "arch/mips/lantiq/xway/Kconfig"
+source "arch/mips/lantiq/falcon/Kconfig"
 
 endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
index e5dae0e..7e9c69e 100644
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devices.o
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
 obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+obj-$(CONFIG_SOC_FALCON) += falcon/
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
index f3dff05..b3ec498 100644
--- a/arch/mips/lantiq/Platform
+++ b/arch/mips/lantiq/Platform
@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ)	+= lantiq/
 cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
 load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
 cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
+cflags-$(CONFIG_SOC_FALCON)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
new file mode 100644
index 0000000..e9c7455
--- /dev/null
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -0,0 +1 @@
+obj-y := clk.o prom.o reset.o sysctrl.o devices.o
diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
new file mode 100644
index 0000000..afe1b52
--- /dev/null
+++ b/arch/mips/lantiq/falcon/clk.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/ioport.h>
+#include <linux/export.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* CPU0 Clock Control Register */
+#define LTQ_SYS1_CPU0CC		0x0040
+/* clock divider bit */
+#define LTQ_CPU0CC_CPUDIV	0x0001
+
+unsigned int
+ltq_get_io_region_clock(void)
+{
+	return CLOCK_200M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int
+ltq_get_cpu_hz(void)
+{
+	if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
+		return CLOCK_200M;
+	else
+		return CLOCK_400M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int
+ltq_get_fpi_hz(void)
+{
+	return CLOCK_100M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
new file mode 100644
index 0000000..c4606f2
--- /dev/null
+++ b/arch/mips/lantiq/falcon/devices.c
@@ -0,0 +1,87 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* nand flash */
+/* address lines used for NAND control signals */
+#define NAND_ADDR_ALE		0x10000
+#define NAND_ADDR_CLE		0x20000
+/* Ready/Busy Status */
+#define MODCON_STS		0x0002
+/* Ready/Busy Status Edge */
+#define MODCON_STSEDGE		0x0004
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static int
+falcon_nand_ready(struct mtd_info *mtd)
+{
+	u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
+
+	return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
+						(MODCON_STS | MODCON_STSEDGE)));
+}
+
+static void
+falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
+
+		if (ctrl & NAND_CLE)
+			nandaddr |= NAND_ADDR_CLE;
+		if (ctrl & NAND_ALE)
+			nandaddr |= NAND_ADDR_ALE;
+
+		this->IO_ADDR_W = (void __iomem *) nandaddr;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static struct platform_nand_data falcon_flash_nand_data = {
+	.chip = {
+		.nr_chips		= 1,
+		.chip_delay		= 25,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl = {
+		.cmd_ctrl		= falcon_hwcontrol,
+		.dev_ready		= falcon_nand_ready,
+	}
+};
+
+static struct resource ltq_nand_res =
+	MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX);
+
+static struct platform_device ltq_flash_nand = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &ltq_nand_res,
+	.dev		= {
+		.platform_data = &falcon_flash_nand_data,
+	},
+};
+
+void __init
+falcon_register_nand(void)
+{
+	platform_device_register(&ltq_flash_nand);
+}
diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
new file mode 100644
index 0000000..e802a7c
--- /dev/null
+++ b/arch/mips/lantiq/falcon/devices.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _FALCON_DEVICES_H__
+#define _FALCON_DEVICES_H__
+
+#include "../devices.h"
+
+extern void falcon_register_nand(void);
+
+#endif
diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
new file mode 100644
index 0000000..b50d6f9
--- /dev/null
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -0,0 +1,93 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+#include "../prom.h"
+
+#define SOC_FALCON		"Falcon"
+#define SOC_FALCON_D		"Falcon-D"
+#define SOC_FALCON_V		"Falcon-V"
+#define SOC_FALCON_M		"Falcon-M"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFF000
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+#define SREV_SHIFT	22
+#define SREV_MASK	0x03C00000
+#define TYPE_SHIFT	26
+#define TYPE_MASK	0x3C000000
+
+#define MUXC_SIF_RX_PIN		112
+#define MUXC_SIF_TX_PIN		113
+
+/* this parameter allows us enable/disable asc1 via commandline */
+static int register_asc1;
+static int __init
+ltq_parse_asc1(char *p)
+{
+	register_asc1 = 1;
+	return 0;
+}
+__setup("use_asc1", ltq_parse_asc1);
+
+void __init
+ltq_soc_setup(void)
+{
+	ltq_register_asc(0);
+	ltq_register_wdt();
+	falcon_register_gpio();
+	if (register_asc1) {
+		ltq_register_asc(1);
+		if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
+			pr_err("failed to request asc1-rx");
+		if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
+			pr_err("failed to request asc1-tx");
+		ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
+	}
+}
+
+void __init
+ltq_soc_detect(struct ltq_soc_info *i)
+{
+	u32 type;
+	i->partnum = (ltq_r32(LTQ_FALCON_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_FALCON_CHIPID) & REV_MASK) >> REV_SHIFT;
+	i->srev = ((ltq_r32(LTQ_FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT);
+	sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'),
+		i->rev & 0x7, (i->srev & 0x3) + 1);
+
+	switch (i->partnum) {
+	case SOC_ID_FALCON:
+		type = (ltq_r32(LTQ_FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT;
+		switch (type) {
+		case 0:
+			i->name = SOC_FALCON_D;
+			break;
+		case 1:
+			i->name = SOC_FALCON_V;
+			break;
+		case 2:
+			i->name = SOC_FALCON_M;
+			break;
+		default:
+			i->name = SOC_FALCON;
+			break;
+		}
+		i->type = SOC_TYPE_FALCON;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/falcon/reset.c b/arch/mips/lantiq/falcon/reset.c
new file mode 100644
index 0000000..cbcadc5
--- /dev/null
+++ b/arch/mips/lantiq/falcon/reset.c
@@ -0,0 +1,87 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+#include <linux/export.h>
+
+#include <lantiq_soc.h>
+
+/* CPU0 Reset Source Register */
+#define LTQ_SYS1_CPU0RS		0x0040
+/* reset cause mask */
+#define LTQ_CPU0RS_MASK		0x0003
+
+int
+ltq_reset_cause(void)
+{
+	return ltq_sys1_r32(LTQ_SYS1_CPU0RS) & LTQ_CPU0RS_MASK;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+#define BOOT_REG_BASE	(KSEG1 | 0x1F200000)
+#define BOOT_PW1_REG	(BOOT_REG_BASE | 0x20)
+#define BOOT_PW2_REG	(BOOT_REG_BASE | 0x24)
+#define BOOT_PW1	0x4C545100
+#define BOOT_PW2	0x0051544C
+
+#define WDT_REG_BASE	(KSEG1 | 0x1F8803F0)
+#define WDT_PW1		0x00BE0000
+#define WDT_PW2		0x00DC0000
+
+static void
+ltq_machine_restart(char *command)
+{
+	pr_notice("System restart\n");
+	local_irq_disable();
+
+	/* reboot magic */
+	ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */
+	ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */
+	ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */
+
+	/* watchdog magic */
+	ltq_w32(WDT_PW1, (void *)WDT_REG_BASE);
+	ltq_w32(WDT_PW2 |
+		(0x3 << 26) | /* PWL */
+		(0x2 << 24) | /* CLKDIV */
+		(0x1 << 31) | /* enable */
+		(1), /* reload */
+		(void *)WDT_REG_BASE);
+	unreachable();
+}
+
+static void
+ltq_machine_halt(void)
+{
+	pr_notice("System halted.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static void
+ltq_machine_power_off(void)
+{
+	pr_notice("Please turn off the power now.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init
+mips_reboot_setup(void)
+{
+	_machine_restart = ltq_machine_restart;
+	_machine_halt = ltq_machine_halt;
+	pm_power_off = ltq_machine_power_off;
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
new file mode 100644
index 0000000..905a142
--- /dev/null
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <asm/delay.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* infrastructure control register */
+#define SYS1_INFRAC		0x00bc
+/* Configuration fuses for drivers and pll */
+#define STATUS_CONFIG		0x0040
+
+/* GPE frequency selection */
+#define GPPC_OFFSET		24
+#define GPEFREQ_MASK		0x00000C0
+#define GPEFREQ_OFFSET		10
+/* Clock status register */
+#define LTQ_SYSCTL_CLKS		0x0000
+/* Clock enable register */
+#define LTQ_SYSCTL_CLKEN	0x0004
+/* Clock clear register */
+#define LTQ_SYSCTL_CLKCLR	0x0008
+/* Activation Status Register */
+#define LTQ_SYSCTL_ACTS		0x0020
+/* Activation Register */
+#define LTQ_SYSCTL_ACT		0x0024
+/* Deactivation Register */
+#define LTQ_SYSCTL_DEACT	0x0028
+/* reboot Register */
+#define LTQ_SYSCTL_RBT		0x002c
+
+static struct resource ltq_sysctl_res[] = {
+	MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
+	MEM_RES("syseth", LTQ_SYS_ETH_BASE_ADDR, LTQ_SYS_ETH_SIZE),
+	MEM_RES("sysgpe", LTQ_SYS_GPE_BASE_ADDR, LTQ_SYS_GPE_SIZE),
+};
+
+static struct resource ltq_status_res =
+	MEM_RES("status", LTQ_STATUS_BASE_ADDR, LTQ_STATUS_SIZE);
+static struct resource ltq_ebu_res =
+	MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
+
+static void __iomem *ltq_sysctl[3];
+static void __iomem *ltq_status_membase;
+void __iomem *ltq_sys1_membase;
+void __iomem *ltq_ebu_membase;
+
+#define ltq_reg_w32(m, x, y)	ltq_w32((x), ltq_sysctl[m] + (y))
+#define ltq_reg_r32(m, x)	ltq_r32(ltq_sysctl[m] + (x))
+#define ltq_reg_w32_mask(m, clear, set, reg)	\
+		ltq_reg_w32(m, (ltq_reg_r32(m, reg) & ~(clear)) | (set), reg)
+
+#define ltq_status_w32(x, y)	ltq_w32((x), ltq_status_membase + (y))
+#define ltq_status_r32(x)	ltq_r32(ltq_status_membase + (x))
+
+static inline void
+ltq_sysctl_wait(int module, unsigned int mask,
+		unsigned int test, unsigned int reg)
+{
+	int err = 1000000;
+
+	do {} while (--err && ((ltq_reg_r32(module, reg)
+					& mask) != test));
+	if (!err)
+		pr_err("module de/activation failed %d %08X %08X\n",
+							module, mask, test);
+}
+
+void
+ltq_sysctl_activate(int module, unsigned int mask)
+{
+	if (module > SYSCTL_SYSGPE)
+		return;
+
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_ACT);
+	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
+}
+EXPORT_SYMBOL(ltq_sysctl_activate);
+
+void
+ltq_sysctl_deactivate(int module, unsigned int mask)
+{
+	if (module > SYSCTL_SYSGPE)
+		return;
+
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_DEACT);
+	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_ACTS);
+}
+EXPORT_SYMBOL(ltq_sysctl_deactivate);
+
+void
+ltq_sysctl_clken(int module, unsigned int mask)
+{
+	if (module > SYSCTL_SYSGPE)
+		return;
+
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_CLKS);
+}
+EXPORT_SYMBOL(ltq_sysctl_clken);
+
+void
+ltq_sysctl_clkdis(int module, unsigned int mask)
+{
+	if (module > SYSCTL_SYSGPE)
+		return;
+
+	ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+	ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_CLKS);
+}
+EXPORT_SYMBOL(ltq_sysctl_clkdis);
+
+void
+ltq_sysctl_reboot(int module, unsigned int mask)
+{
+	unsigned int act;
+
+	if (module > SYSCTL_SYSGPE)
+		return;
+
+	act = ltq_reg_r32(module, LTQ_SYSCTL_ACT);
+	if ((~act & mask) != 0)
+		ltq_sysctl_activate(module, ~act & mask);
+	ltq_reg_w32(module, act & mask, LTQ_SYSCTL_RBT);
+	ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
+}
+EXPORT_SYMBOL(ltq_sysctl_reboot);
+
+/* enable the ONU core */
+static void
+ltq_gpe_enable(void)
+{
+	unsigned int freq;
+	unsigned int status;
+
+	/* if if the clock is already enabled */
+	status = ltq_reg_r32(SYSCTL_SYS1, SYS1_INFRAC);
+	if (status & (1 << (GPPC_OFFSET + 1)))
+		return;
+
+	if (ltq_status_r32(STATUS_CONFIG) == 0)
+		freq = 1; /* use 625MHz on unfused chip */
+	else
+		freq = (ltq_status_r32(STATUS_CONFIG) &
+			GPEFREQ_MASK) >>
+			GPEFREQ_OFFSET;
+
+	/* apply new frequency */
+	ltq_reg_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
+		freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
+	udelay(1);
+
+	/* enable new frequency */
+	ltq_reg_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
+	udelay(1);
+}
+
+void __init
+ltq_soc_init(void)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		ltq_sysctl[i] = ltq_remap_resource(&ltq_sysctl_res[i]);
+
+	ltq_sys1_membase = ltq_sysctl[0];
+	ltq_status_membase = ltq_remap_resource(&ltq_status_res);
+	ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_res);
+
+	ltq_gpe_enable();
+}
-- 
1.7.7.1