summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches-3.2/0021-MIPS-lantiq-use-devres-managed-gpios.patch
blob: e7ae83d5a605200df00919df02cfffa66ddeaa14 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
From 20ed991ce59030544426dc3422da7ee76667537b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 8 Mar 2012 08:37:25 +0100
Subject: [PATCH 21/73] MIPS: lantiq: use devres managed gpios

3.2 introduced devm_request_gpio() to allow managed gpios.

The devres api requires a struct device pointer to work. Add a parameter to ltq_gpio_request()
so that managed gpios can work.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 .../include/asm/mach-lantiq/falcon/lantiq_soc.h    |    4 +---
 arch/mips/include/asm/mach-lantiq/lantiq.h         |    4 ++++
 .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 ---
 arch/mips/lantiq/falcon/gpio.c                     |    4 ++--
 arch/mips/lantiq/falcon/prom.c                     |    7 -------
 arch/mips/lantiq/xway/gpio.c                       |    4 ++--
 arch/mips/lantiq/xway/gpio_stp.c                   |   13 ++++++++-----
 arch/mips/pci/pci-lantiq.c                         |   18 ++++++++++--------
 drivers/net/ethernet/lantiq_etop.c                 |    9 ++++++---
 drivers/tty/serial/lantiq.c                        |   12 ++++++++++++
 10 files changed, 45 insertions(+), 33 deletions(-)

diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index b074748..a5dc06a 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -126,9 +126,7 @@ extern __iomem void *ltq_sys1_membase;
 #define ltq_sys1_w32_mask(clear, set, reg)   \
 	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
 
-/* gpio_request wrapper to help configure the pin */
-extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
-				unsigned int dir, const char *name);
+/* gpio wrapper to help configure the pin muxing */
 extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
 
 /* to keep the irq code generic we need to define these to 0 as falcon
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
index 188de0f..924b91a 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -37,6 +37,10 @@ extern unsigned int ltq_get_soc_type(void);
 /* spinlock all ebu i/o */
 extern spinlock_t ebu_lock;
 
+/* request a non-gpio and set the PIO config */
+extern int ltq_gpio_request(struct device *dev, unsigned int pin,
+		unsigned int mux, unsigned int dir, const char *name);
+
 /* some irq helpers */
 extern void ltq_disable_irq(struct irq_data *data);
 extern void ltq_mask_and_ack_irq(struct irq_data *data);
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index 6983d75..6c5b705 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -145,9 +145,6 @@
 extern __iomem void *ltq_ebu_membase;
 extern __iomem void *ltq_cgu_membase;
 
-/* request a non-gpio and set the PIO config */
-extern int  ltq_gpio_request(unsigned int pin, unsigned int mux,
-				unsigned int dir, const char *name);
 extern void ltq_pmu_enable(unsigned int module);
 extern void ltq_pmu_disable(unsigned int module);
 extern void ltq_cgu_enable(unsigned int clk);
diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
index 28f8639..a44f71b 100644
--- a/arch/mips/lantiq/falcon/gpio.c
+++ b/arch/mips/lantiq/falcon/gpio.c
@@ -97,7 +97,7 @@ int ltq_gpio_mux_set(unsigned int pin, unsigned int mux)
 }
 EXPORT_SYMBOL(ltq_gpio_mux_set);
 
-int ltq_gpio_request(unsigned int pin, unsigned int mux,
+int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
 			unsigned int dir, const char *name)
 {
 	int port = pin / 100;
@@ -106,7 +106,7 @@ int ltq_gpio_request(unsigned int pin, unsigned int mux,
 	if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
 		return -EINVAL;
 
-	if (gpio_request(pin, name)) {
+	if (devm_gpio_request(dev, pin, name)) {
 		pr_err("failed to setup lantiq gpio: %s\n", name);
 		return -EBUSY;
 	}
diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
index b50d6f9..f98b389 100644
--- a/arch/mips/lantiq/falcon/prom.c
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -27,9 +27,6 @@
 #define TYPE_SHIFT	26
 #define TYPE_MASK	0x3C000000
 
-#define MUXC_SIF_RX_PIN		112
-#define MUXC_SIF_TX_PIN		113
-
 /* this parameter allows us enable/disable asc1 via commandline */
 static int register_asc1;
 static int __init
@@ -48,10 +45,6 @@ ltq_soc_setup(void)
 	falcon_register_gpio();
 	if (register_asc1) {
 		ltq_register_asc(1);
-		if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
-			pr_err("failed to request asc1-rx");
-		if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
-			pr_err("failed to request asc1-tx");
 		ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
 	}
 }
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index 14ff7c7..54ec6c9 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -50,14 +50,14 @@ int irq_to_gpio(unsigned int gpio)
 }
 EXPORT_SYMBOL(irq_to_gpio);
 
-int ltq_gpio_request(unsigned int pin, unsigned int mux,
+int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
 			unsigned int dir, const char *name)
 {
 	int id = 0;
 
 	if (pin >= (MAX_PORTS * PINS_PER_PORT))
 		return -EINVAL;
-	if (gpio_request(pin, name)) {
+	if (devm_gpio_request(dev, pin, name)) {
 		pr_err("failed to setup lantiq gpio: %s\n", name);
 		return -EBUSY;
 	}
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index cb6f170..e6b4809 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -80,11 +80,6 @@ static struct gpio_chip ltq_stp_chip = {
 
 static int ltq_stp_hw_init(void)
 {
-	/* the 3 pins used to control the external stp */
-	ltq_gpio_request(4, 2, 1, "stp-st");
-	ltq_gpio_request(5, 2, 1, "stp-d");
-	ltq_gpio_request(6, 2, 1, "stp-sh");
-
 	/* sane defaults */
 	ltq_stp_w32(0, LTQ_STP_AR);
 	ltq_stp_w32(0, LTQ_STP_CPU0);
@@ -133,6 +128,14 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to remap STP memory\n");
 		return -ENOMEM;
 	}
+
+	/* the 3 pins used to control the external stp */
+	if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
+			ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
+			ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
+		dev_err(&pdev->dev, "failed to request needed gpios\n");
+		return -EBUSY;
+	}
 	ret = gpiochip_add(&ltq_stp_chip);
 	if (!ret)
 		ret = ltq_stp_hw_init();
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index c001c5a..47b551c 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -150,24 +150,26 @@ static u32 ltq_calc_bar11mask(void)
 	return bar11mask;
 }
 
-static void ltq_pci_setup_gpio(int gpio)
+static void ltq_pci_setup_gpio(struct device *dev)
 {
+	struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
 	int i;
 	for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
-		if (gpio & (1 << i)) {
-			ltq_gpio_request(ltq_pci_gpio_map[i].pin,
+		if (conf->gpio & (1 << i)) {
+			ltq_gpio_request(dev, ltq_pci_gpio_map[i].pin,
 				ltq_pci_gpio_map[i].mux,
 				ltq_pci_gpio_map[i].dir,
 				ltq_pci_gpio_map[i].name);
 		}
 	}
-	ltq_gpio_request(21, 0, 1, "pci-reset");
-	ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+	ltq_gpio_request(dev, 21, 0, 1, "pci-reset");
+	ltq_pci_req_mask = (conf->gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
 }
 
-static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+static int __devinit ltq_pci_startup(struct device *dev)
 {
 	u32 temp_buffer;
+	struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
 
 	/* set clock to 33Mhz */
 	if (ltq_is_ar9()) {
@@ -190,7 +192,7 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
 	}
 
 	/* setup pci clock and gpis used by pci */
-	ltq_pci_setup_gpio(conf->gpio);
+	ltq_pci_setup_gpio(dev);
 
 	/* enable auto-switching between PCI and EBU */
 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
@@ -275,7 +277,7 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
 		ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
 	ltq_pci_controller.io_map_base =
 		(unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
-	ltq_pci_startup(ltq_pci_data);
+	ltq_pci_startup(&pdev->dev);
 	register_pci_controller(&ltq_pci_controller);
 
 	return 0;
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index dddb9fe..fcbb9c7 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -291,9 +291,6 @@ ltq_etop_gbit_init(void)
 {
 	ltq_pmu_enable(PMU_SWITCH);
 
-	ltq_gpio_request(42, 2, 1, "MDIO");
-	ltq_gpio_request(43, 2, 1, "MDC");
-
 	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
 	/** Disable MDIO auto polling mode */
 	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
@@ -868,6 +865,12 @@ ltq_etop_probe(struct platform_device *pdev)
 			err = -ENOMEM;
 			goto err_out;
 		}
+		if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
+				ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
+			dev_err(&pdev->dev, "failed to request MDIO gpios\n");
+			err = -EBUSY;
+			goto err_out;
+		}
 	}
 
 	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 96c1cac..5d25828 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -107,6 +107,9 @@
 #define ASCFSTAT_TXFREEMASK	0x3F000000
 #define ASCFSTAT_TXFREEOFF	24
 
+#define MUXC_SIF_RX_PIN		112
+#define MUXC_SIF_TX_PIN		113
+
 static void lqasc_tx_chars(struct uart_port *port);
 static struct ltq_uart_port *lqasc_port[MAXPORTS];
 static struct uart_driver lqasc_reg;
@@ -529,6 +532,15 @@ lqasc_request_port(struct uart_port *port)
 		if (port->membase == NULL)
 			return -ENOMEM;
 	}
+	if (ltq_is_falcon() && (port->line == 1)) {
+		struct ltq_uart_port *ltq_port = lqasc_port[pdev->id];
+		if (ltq_gpio_request(&pdev->dev, MUXC_SIF_RX_PIN,
+				3, 0, "asc1-rx"))
+			return -EBUSY;
+		if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
+				3, 1, "asc1-tx"))
+			return -EBUSY;
+	}
 	return 0;
 }
 
-- 
1.7.9.1