summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
blob: a9ae084a604c63bc1bbf075fcaf7947c14ecab4d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:26:42 +0200
Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master

This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
 drivers/i2c/busses/Kconfig      |   10 +
 drivers/i2c/busses/Makefile     |    1 +
 drivers/i2c/busses/i2c-lantiq.c |  747 +++++++++++++++++++++++++++++++++++++++
 drivers/i2c/busses/i2c-lantiq.h |  234 ++++++++++++
 4 files changed, 992 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-lantiq.c
 create mode 100644 drivers/i2c/busses/i2c-lantiq.h

--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -639,6 +639,16 @@ config I2C_MESON
 	  If you say yes to this option, support will be included for the
 	  I2C interface on the Amlogic Meson family of SoCs.
 
+config I2C_LANTIQ
+	tristate "Lantiq I2C interface"
+	depends on LANTIQ && SOC_FALCON
+	help
+	  If you say yes to this option, support will be included for the
+	  Lantiq I2C core.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-lantiq.
+
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
 obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
+obj-$(CONFIG_I2C_LANTIQ)	+= i2c-lantiq.o
 obj-$(CONFIG_I2C_LPC2K)		+= i2c-lpc2k.o
 obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
--- /dev/null
+++ b/drivers/i2c/busses/i2c-lantiq.c
@@ -0,0 +1,747 @@
+
+/*
+ * Lantiq I2C bus adapter
+ *
+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h> /* for kzalloc, kfree */
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_i2c.h>
+
+#include <lantiq_soc.h>
+#include "i2c-lantiq.h"
+
+/*
+ * CURRENT ISSUES:
+ * - no high speed support
+ * - ten bit mode is not tested (no slave devices)
+ */
+
+/* access macros */
+#define i2c_r32(reg)	\
+	__raw_readl(&(priv->membase)->reg)
+#define i2c_w32(val, reg)	\
+	__raw_writel(val, &(priv->membase)->reg)
+#define i2c_w32_mask(clear, set, reg)	\
+	i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
+
+#define DRV_NAME "i2c-lantiq"
+#define DRV_VERSION "1.00"
+
+#define LTQ_I2C_BUSY_TIMEOUT		20 /* ms */
+
+#ifdef DEBUG
+#define LTQ_I2C_XFER_TIMEOUT		(25*HZ)
+#else
+#define LTQ_I2C_XFER_TIMEOUT		HZ
+#endif
+
+#define LTQ_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
+					 I2C_IMSC_I2C_ERR_INT_EN)
+
+#define LTQ_I2C_ARB_LOST		(1 << 0)
+#define LTQ_I2C_NACK			(1 << 1)
+#define LTQ_I2C_RX_UFL			(1 << 2)
+#define LTQ_I2C_RX_OFL			(1 << 3)
+#define LTQ_I2C_TX_UFL			(1 << 4)
+#define LTQ_I2C_TX_OFL			(1 << 5)
+
+struct ltq_i2c {
+	struct mutex mutex;
+
+
+	/* active clock settings */
+	unsigned int input_clock;	/* clock input for i2c hardware block */
+	unsigned int i2c_clock;		/* approximated bus clock in kHz */
+
+	struct clk *clk_gate;
+	struct clk *clk_input;
+
+
+	/* resources (memory and interrupts) */
+	int irq_lb;				/* last burst irq */
+
+	struct lantiq_reg_i2c __iomem *membase;	/* base of mapped registers */
+
+	struct i2c_adapter adap;
+	struct device *dev;
+
+	struct completion cmd_complete;
+
+
+	/* message transfer data */
+	struct i2c_msg *current_msg;	/* current message */
+	int msgs_num;		/* number of messages to handle */
+	u8 *msg_buf;		/* current buffer */
+	u32 msg_buf_len;	/* remaining length of current buffer */
+	int msg_err;		/* error status of the current transfer */
+
+
+	/* master status codes */
+	enum {
+		STATUS_IDLE,
+		STATUS_ADDR,	/* address phase */
+		STATUS_WRITE,
+		STATUS_READ,
+		STATUS_READ_END,
+		STATUS_STOP
+	} status;
+};
+
+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
+
+static inline void enable_burst_irq(struct ltq_i2c *priv)
+{
+	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
+}
+static inline void disable_burst_irq(struct ltq_i2c *priv)
+{
+	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
+}
+
+static void prepare_msg_send_addr(struct ltq_i2c *priv)
+{
+	struct i2c_msg *msg = priv->current_msg;
+	int rd = !!(msg->flags & I2C_M_RD);	/* extends to 0 or 1 */
+	u16 addr = msg->addr;
+
+	/* new i2c_msg */
+	priv->msg_buf = msg->buf;
+	priv->msg_buf_len = msg->len;
+	if (rd)
+		priv->status = STATUS_READ;
+	else
+		priv->status = STATUS_WRITE;
+
+	/* send slave address */
+	if (msg->flags & I2C_M_TEN) {
+		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
+		i2c_w32(addr & 0xff, txd);
+	} else {
+		i2c_w32((addr & 0x7f) << 1 | rd, txd);
+	}
+}
+
+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
+{
+	struct i2c_msg *msg = priv->current_msg;
+	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
+
+	pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
+
+	priv->status = STATUS_ADDR;
+
+	if (!(msg->flags & I2C_M_RD))
+		len += msg->len;
+	else
+		/* set maximum received packet size (before rx int!) */
+		i2c_w32(msg->len, mrps_ctrl);
+	i2c_w32(len, tps_ctrl);
+	enable_burst_irq(priv);
+}
+
+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
+{
+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
+	unsigned int input_clock = clk_get_rate(priv->clk_input);
+	u32 dec, inc = 1;
+
+	/* clock changed? */
+	if (priv->input_clock == input_clock)
+		return 0;
+
+	/*
+	 * this formula is only an approximation, found by the recommended
+	 * values in the "I2C Architecture Specification 1.7.1"
+	 */
+	dec = input_clock / (priv->i2c_clock * 2);
+	if (dec <= 6)
+		return -ENXIO;
+
+	i2c_w32(0, fdiv_high_cfg);
+	i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
+		(dec << I2C_FDIV_CFG_DEC_OFFSET),
+		fdiv_cfg);
+
+	dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
+		input_clock, priv->i2c_clock, dec);
+
+	priv->input_clock = input_clock;
+	return 0;
+}
+
+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
+{
+	int ret = 0;
+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
+
+	/* disable bus */
+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
+
+#ifndef DEBUG
+	/* set normal operation clock divider */
+	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
+#else
+	/* for debugging a higher divider value! */
+	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
+#endif
+
+	/* setup clock */
+	ret = ltq_i2c_hw_set_clock(adap);
+	if (ret != 0) {
+		dev_warn(priv->dev, "invalid clock settings\n");
+		return ret;
+	}
+
+	/* configure fifo */
+	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
+		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
+		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
+		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
+		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
+		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
+		fifo_cfg);
+
+	/* configure address */
+	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data in
+					   the fifo */
+		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
+		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
+		0,			/* our slave address (not used!) */
+		addr_cfg);
+
+	/* enable bus */
+	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
+
+	return 0;
+}
+
+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
+
+	do {
+		u32 stat = i2c_r32(bus_stat);
+
+		if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
+			return 0;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, timeout));
+
+	dev_err(priv->dev, "timeout waiting for bus ready\n");
+	return -ETIMEDOUT;
+}
+
+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
+{
+	if (priv->msg_buf_len && priv->msg_buf) {
+		i2c_w32(*priv->msg_buf, txd);
+
+		if (--priv->msg_buf_len)
+			priv->msg_buf++;
+		else
+			priv->msg_buf = NULL;
+	} else {
+		last = 1;
+	}
+
+	if (last)
+		disable_burst_irq(priv);
+}
+
+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
+{
+	u32 fifo_stat, timeout;
+	if (priv->msg_buf_len && priv->msg_buf) {
+		timeout = 5000000;
+		do {
+			fifo_stat = i2c_r32(ffs_stat);
+		} while (!fifo_stat && --timeout);
+		if (!timeout) {
+			last = 1;
+			pr_debug("\nrx timeout\n");
+			goto err;
+		}
+		while (fifo_stat) {
+			*priv->msg_buf = i2c_r32(rxd);
+			if (--priv->msg_buf_len) {
+				priv->msg_buf++;
+			} else {
+				priv->msg_buf = NULL;
+				last = 1;
+				break;
+			}
+			/*
+			 * do not read more than burst size, otherwise no "last
+			 * burst" is generated and the transaction is blocked!
+			 */
+			fifo_stat = 0;
+		}
+	} else {
+		last = 1;
+	}
+err:
+	if (last) {
+		disable_burst_irq(priv);
+
+		if (priv->status == STATUS_READ_END) {
+			/* 
+			 * do the STATUS_STOP and complete() here, as sometimes
+			 * the tx_end is already seen before this is finished
+			 */
+			priv->status = STATUS_STOP;
+			complete(&priv->cmd_complete);
+		} else {
+			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
+			priv->status = STATUS_READ_END;
+		}
+	}
+}
+
+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
+{
+	/* enable interrupts */
+	i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
+
+	/* trigger transfer of first msg */
+	ltq_i2c_set_tx_len(priv);
+}
+
+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
+{
+#if defined(DEBUG)
+	int i, j;
+	pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
+	for (i = 0; i < num; i++) {
+		pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
+			(msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
+			msgs[i].len, msgs[i].addr);
+		if (!(msgs[i].flags & I2C_M_RD) || rx) {
+			for (j = 0; j < msgs[i].len; j++)
+				pr_debug("%02X ", msgs[i].buf[j]);
+		}
+		pr_debug("\n");
+	}
+#endif
+}
+
+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
+{
+	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
+		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
+}
+
+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+			   int num)
+{
+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
+	int ret;
+
+	dev_dbg(priv->dev, "xfer %u messages\n", num);
+	dump_msgs(msgs, num, 0);
+
+	mutex_lock(&priv->mutex);
+
+	init_completion(&priv->cmd_complete);
+	priv->current_msg = msgs;
+	priv->msgs_num = num;
+	priv->msg_err = 0;
+	priv->status = STATUS_IDLE;
+
+	/* wait for the bus to become ready */
+	ret = ltq_i2c_wait_bus_not_busy(priv);
+	if (ret)
+		goto done;
+
+	while (priv->msgs_num) {
+		/* start the transfers */
+		ltq_i2c_xfer_init(priv);
+
+		/* wait for transfers to complete */
+		ret = wait_for_completion_interruptible_timeout(
+			&priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
+		if (ret == 0) {
+			dev_err(priv->dev, "controller timed out\n");
+			ltq_i2c_hw_init(adap);
+			ret = -ETIMEDOUT;
+			goto done;
+		} else if (ret < 0)
+			goto done;
+
+		if (priv->msg_err) {
+			if (priv->msg_err & LTQ_I2C_NACK)
+				ret = -ENXIO;
+			else
+				ret = -EREMOTEIO;
+			goto done;
+		}
+		if (--priv->msgs_num)
+			priv->current_msg++;
+	}
+	/* no error? */
+	ret = num;
+
+done:
+	ltq_i2c_release_bus(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	if (ret >= 0)
+		dump_msgs(msgs, num, 1);
+
+	pr_debug("XFER ret %d\n", ret);
+	return ret;
+}
+
+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
+{
+	struct ltq_i2c *priv = dev_id;
+	struct i2c_msg *msg = priv->current_msg;
+	int last = (irq == priv->irq_lb);
+
+	if (last)
+		pr_debug("LB ");
+	else
+		pr_debug("B ");
+
+	if (msg->flags & I2C_M_RD) {
+		switch (priv->status) {
+		case STATUS_ADDR:
+			pr_debug("X");
+			prepare_msg_send_addr(priv);
+			disable_burst_irq(priv);
+			break;
+		case STATUS_READ:
+		case STATUS_READ_END:
+			pr_debug("R");
+			ltq_i2c_rx(priv, last);
+			break;
+		default:
+			disable_burst_irq(priv);
+			pr_warn("Status R %d\n", priv->status);
+			break;
+		}
+	} else {
+		switch (priv->status) {
+		case STATUS_ADDR:
+			pr_debug("x");
+			prepare_msg_send_addr(priv);
+			break;
+		case STATUS_WRITE:
+			pr_debug("w");
+			ltq_i2c_tx(priv, last);
+			break;
+		default:
+			disable_burst_irq(priv);
+			pr_warn("Status W %d\n", priv->status);
+			break;
+		}
+	}
+
+	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
+	return IRQ_HANDLED;
+}
+
+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
+{
+	u32 i_pro = i2c_r32(p_irqss);
+
+	pr_debug("i2c-p");
+
+	/* not acknowledge */
+	if (i_pro & I2C_P_IRQSS_NACK) {
+		priv->msg_err |= LTQ_I2C_NACK;
+		pr_debug(" nack");
+	}
+
+	/* arbitration lost */
+	if (i_pro & I2C_P_IRQSS_AL) {
+		priv->msg_err |= LTQ_I2C_ARB_LOST;
+		pr_debug(" arb-lost");
+	}
+	/* tx -> rx switch */
+	if (i_pro & I2C_P_IRQSS_RX)
+		pr_debug(" rx");
+
+	/* tx end */
+	if (i_pro & I2C_P_IRQSS_TX_END)
+		pr_debug(" txend");
+	pr_debug("\n");
+
+	if (!priv->msg_err) {
+		/* tx -> rx switch */
+		if (i_pro & I2C_P_IRQSS_RX) {
+			priv->status = STATUS_READ;
+			enable_burst_irq(priv);
+		}
+		if (i_pro & I2C_P_IRQSS_TX_END) {
+			if (priv->status == STATUS_READ)
+				priv->status = STATUS_READ_END;
+			else {
+				disable_burst_irq(priv);
+				priv->status = STATUS_STOP;
+			}
+		}
+	}
+
+	i2c_w32(i_pro, p_irqsc);
+}
+
+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
+{
+	u32 i_raw, i_err = 0;
+	struct ltq_i2c *priv = dev_id;
+
+	i_raw = i2c_r32(mis);
+	pr_debug("i_raw 0x%08X\n", i_raw);
+
+	/* error interrupt */
+	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
+		i_err = i2c_r32(err_irqss);
+		pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
+			i_err, i2c_r32(bus_stat));
+
+		/* tx fifo overflow (8) */
+		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
+			priv->msg_err |= LTQ_I2C_TX_OFL;
+
+		/* tx fifo underflow (4) */
+		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
+			priv->msg_err |= LTQ_I2C_TX_UFL;
+
+		/* rx fifo overflow (2) */
+		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
+			priv->msg_err |= LTQ_I2C_RX_OFL;
+
+		/* rx fifo underflow (1) */
+		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
+			priv->msg_err |= LTQ_I2C_RX_UFL;
+
+		i2c_w32(i_err, err_irqsc);
+	}
+
+	/* protocol interrupt */
+	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
+		ltq_i2c_isr_prot(priv);
+
+	if ((priv->msg_err) || (priv->status == STATUS_STOP))
+		complete(&priv->cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
+{
+	return	I2C_FUNC_I2C |
+		I2C_FUNC_10BIT_ADDR |
+		I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm ltq_i2c_algorithm = {
+	.master_xfer	= ltq_i2c_xfer,
+	.functionality	= ltq_i2c_functionality,
+};
+
+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct ltq_i2c *priv;
+	struct i2c_adapter *adap;
+	struct resource *mmres, irqres[4];
+	int ret = 0;
+
+	dev_dbg(&pdev->dev, "probing\n");
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ret = of_irq_to_resource_table(node, irqres, 4);
+	if (!mmres || (ret != 4)) {
+		dev_err(&pdev->dev, "no resources\n");
+		return -ENODEV;
+	}
+
+	/* allocate private data */
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "can't allocate private data\n");
+		return -ENOMEM;
+	}
+
+	adap = &priv->adap;
+	i2c_set_adapdata(adap, priv);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
+	adap->algo = &ltq_i2c_algorithm;
+
+	if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
+		dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
+		priv->i2c_clock = 100000;
+	}
+
+	init_completion(&priv->cmd_complete);
+	mutex_init(&priv->mutex);
+
+	priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
+	if (priv->membase == NULL)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->irq_lb = irqres[0].start;
+
+	ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
+		0x0, "i2c lb", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
+			irqres[0].start);
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
+		0x0, "i2c b", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
+			irqres[1].start);
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
+		0x0, "i2c err", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get error IRQ %d\n",
+			irqres[2].start);
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
+		0x0, "i2c p", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
+			irqres[3].start);
+		return -ENODEV;
+	}
+
+	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
+	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
+		irqres[1].start, irqres[2].start, irqres[3].start);
+
+	priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk_gate)) {
+		dev_err(&pdev->dev, "failed to get i2c clk\n");
+		return -ENOENT;
+	}
+
+	/* this is a static clock, which has no refcounting */
+	priv->clk_input = clk_get_fpi();
+	if (IS_ERR(priv->clk_input)) {
+		dev_err(&pdev->dev, "failed to get fpi clk\n");
+		return -ENOENT;
+	}
+
+	clk_activate(priv->clk_gate);
+
+	/* add our adapter to the i2c stack */
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret) {
+		dev_err(&pdev->dev, "can't register I2C adapter\n");
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	i2c_set_adapdata(adap, priv);
+
+	/* print module version information */
+	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
+		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
+		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
+
+	/* initialize HW */
+	ret = ltq_i2c_hw_init(adap);
+	if (ret) {
+		dev_err(&pdev->dev, "can't configure adapter\n");
+		i2c_del_adapter(adap);
+		platform_set_drvdata(pdev, NULL);
+	} else {
+		dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
+	}
+
+	of_i2c_register_devices(adap);
+
+out:
+	/* if init failed, we need to deactivate the clock gate */
+	if (ret)
+		clk_deactivate(priv->clk_gate);
+
+	return ret;
+}
+
+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
+{
+	struct ltq_i2c *priv = platform_get_drvdata(pdev);
+
+	/* disable bus */
+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
+
+	/* power down the core */
+	clk_deactivate(priv->clk_gate);
+
+	/* remove driver */
+	i2c_del_adapter(&priv->adap);
+	kfree(priv);
+
+	dev_dbg(&pdev->dev, "removed\n");
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+static const struct of_device_id ltq_i2c_match[] = {
+	{ .compatible = "lantiq,lantiq-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
+
+static struct platform_driver ltq_i2c_driver = {
+	.probe	= ltq_i2c_probe,
+	.remove	= __devexit_p(ltq_i2c_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = ltq_i2c_match,
+	},
+};
+
+module_platform_driver(ltq_i2c_driver);
+
+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
--- /dev/null
+++ b/drivers/i2c/busses/i2c-lantiq.h
@@ -0,0 +1,234 @@
+#ifndef I2C_LANTIQ_H
+#define I2C_LANTIQ_H
+
+/* I2C register structure */
+struct lantiq_reg_i2c {
+	/* I2C Kernel Clock Control Register */
+	unsigned int clc; /* 0x00000000 */
+	/* Reserved */
+	unsigned int res_0; /* 0x00000004 */
+	/* I2C Identification Register */
+	unsigned int id; /* 0x00000008 */
+	/* Reserved */
+	unsigned int res_1; /* 0x0000000C */
+	/*
+	 * I2C RUN Control Register
+	 * This register enables and disables the I2C peripheral. Before
+	 * enabling, the I2C has to be configured properly. After enabling
+	 * no configuration is possible
+	 */
+	unsigned int run_ctrl; /* 0x00000010 */
+	/*
+	 * I2C End Data Control Register
+	 * This register is used to either turn around the data transmission
+	 * direction or to address another slave without sending a stop
+	 * condition. Also the software can stop the slave-transmitter by
+	 * sending a not-accolade when working as master-receiver or even
+	 * stop data transmission immediately when operating as
+	 * master-transmitter. The writing to the bits of this control
+	 * register is only effective when in MASTER RECEIVES BYTES, MASTER
+	 * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
+	 */
+	unsigned int endd_ctrl; /* 0x00000014 */
+	/*
+	 * I2C Fractional Divider Configuration Register
+	 * These register is used to program the fractional divider of the I2C
+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
+	 * two (fixed) values for the two operating frequencies are programmed
+	 * into these (configuration) registers. The Register FDIV_HIGH_CFG has
+	 * the same layout as I2C_FDIV_CFG.
+	 */
+	unsigned int fdiv_cfg; /* 0x00000018 */
+	/*
+	 * I2C Fractional Divider (highspeed mode) Configuration Register
+	 * These register is used to program the fractional divider of the I2C
+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
+	 * two (fixed) values for the two operating frequencies are programmed
+	 * into these (configuration) registers. The Register FDIV_CFG has the
+	 * same layout as I2C_FDIV_CFG.
+	 */
+	unsigned int fdiv_high_cfg; /* 0x0000001C */
+	/* I2C Address Configuration Register */
+	unsigned int addr_cfg; /* 0x00000020 */
+	/* I2C Bus Status Register
+	 * This register gives a status information of the I2C. This additional
+	 * information can be used by the software to start proper actions.
+	 */
+	unsigned int bus_stat; /* 0x00000024 */
+	/* I2C FIFO Configuration Register */
+	unsigned int fifo_cfg; /* 0x00000028 */
+	/* I2C Maximum Received Packet Size Register */
+	unsigned int mrps_ctrl; /* 0x0000002C */
+	/* I2C Received Packet Size Status Register */
+	unsigned int rps_stat; /* 0x00000030 */
+	/* I2C Transmit Packet Size Register */
+	unsigned int tps_ctrl; /* 0x00000034 */
+	/* I2C Filled FIFO Stages Status Register */
+	unsigned int ffs_stat; /* 0x00000038 */
+	/* Reserved */
+	unsigned int res_2; /* 0x0000003C */
+	/* I2C Timing Configuration Register */
+	unsigned int tim_cfg; /* 0x00000040 */
+	/* Reserved */
+	unsigned int res_3[7]; /* 0x00000044 */
+	/* I2C Error Interrupt Request Source Mask Register */
+	unsigned int err_irqsm; /* 0x00000060 */
+	/* I2C Error Interrupt Request Source Status Register */
+	unsigned int err_irqss; /* 0x00000064 */
+	/* I2C Error Interrupt Request Source Clear Register */
+	unsigned int err_irqsc; /* 0x00000068 */
+	/* Reserved */
+	unsigned int res_4; /* 0x0000006C */
+	/* I2C Protocol Interrupt Request Source Mask Register */
+	unsigned int p_irqsm; /* 0x00000070 */
+	/* I2C Protocol Interrupt Request Source Status Register */
+	unsigned int p_irqss; /* 0x00000074 */
+	/* I2C Protocol Interrupt Request Source Clear Register */
+	unsigned int p_irqsc; /* 0x00000078 */
+	/* Reserved */
+	unsigned int res_5; /* 0x0000007C */
+	/* I2C Raw Interrupt Status Register */
+	unsigned int ris; /* 0x00000080 */
+	/* I2C Interrupt Mask Control Register */
+	unsigned int imsc; /* 0x00000084 */
+	/* I2C Masked Interrupt Status Register */
+	unsigned int mis; /* 0x00000088 */
+	/* I2C Interrupt Clear Register */
+	unsigned int icr; /* 0x0000008C */
+	/* I2C Interrupt Set Register */
+	unsigned int isr; /* 0x00000090 */
+	/* I2C DMA Enable Register */
+	unsigned int dmae; /* 0x00000094 */
+	/* Reserved */
+	unsigned int res_6[8154]; /* 0x00000098 */
+	/* I2C Transmit Data Register */
+	unsigned int txd; /* 0x00008000 */
+	/* Reserved */
+	unsigned int res_7[4095]; /* 0x00008004 */
+	/* I2C Receive Data Register */
+	unsigned int rxd; /* 0x0000C000 */
+	/* Reserved */
+	unsigned int res_8[4095]; /* 0x0000C004 */
+};
+
+/*
+ * Clock Divider for Normal Run Mode
+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
+ * on reading.
+ */
+#define I2C_CLC_RMC_MASK 0x0000FF00
+/* field offset */
+#define I2C_CLC_RMC_OFFSET 8
+
+/* Fields of "I2C Identification Register" */
+/* Module ID */
+#define I2C_ID_ID_MASK 0x0000FF00
+/* field offset */
+#define I2C_ID_ID_OFFSET 8
+/* Revision */
+#define I2C_ID_REV_MASK 0x000000FF
+/* field offset */
+#define I2C_ID_REV_OFFSET 0
+
+/* Fields of "I2C Interrupt Mask Control Register" */
+/* Enable */
+#define I2C_IMSC_BREQ_INT_EN 0x00000008
+/* Enable */
+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
+
+/* Fields of "I2C Fractional Divider Configuration Register" */
+/* field offset */
+#define I2C_FDIV_CFG_INC_OFFSET 16
+
+/* Fields of "I2C Interrupt Mask Control Register" */
+/* Enable */
+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
+/* Enable */
+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
+
+/* Fields of "I2C Error Interrupt Request Source Status Register" */
+/* TXF_OFL */
+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
+/* TXF_UFL */
+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
+/* RXF_OFL */
+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
+/* RXF_UFL */
+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
+
+/* Fields of "I2C Raw Interrupt Status Register" */
+/* Read: Interrupt occurred. */
+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
+/* Read: Interrupt occurred. */
+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
+
+/* Fields of "I2C FIFO Configuration Register" */
+/* TX FIFO Flow Control */
+#define I2C_FIFO_CFG_TXFC 0x00020000
+/* RX FIFO Flow Control */
+#define I2C_FIFO_CFG_RXFC 0x00010000
+/* Word aligned (character alignment of four characters) */
+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
+/* Word aligned (character alignment of four characters) */
+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
+/* 1 word */
+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
+
+/* Fields of "I2C FIFO Configuration Register" */
+/* 1 word */
+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
+/* Stop on Packet End Enable */
+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
+/* Stop on Not Acknowledge Enable */
+#define I2C_ADDR_CFG_SONA_EN 0x00100000
+/* Enable */
+#define I2C_ADDR_CFG_MnS_EN 0x00080000
+
+/* Fields of "I2C Interrupt Clear Register" */
+/* Clear */
+#define I2C_ICR_BREQ_INT_CLR 0x00000008
+/* Clear */
+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
+
+/* Fields of "I2C Fractional Divider Configuration Register" */
+/* field offset */
+#define I2C_FDIV_CFG_DEC_OFFSET 0
+
+/* Fields of "I2C Bus Status Register" */
+/* Bus Status */
+#define I2C_BUS_STAT_BS_MASK 0x00000003
+/* Read from I2C Bus. */
+#define I2C_BUS_STAT_RNW_READ 0x00000004
+/* I2C Bus is free. */
+#define I2C_BUS_STAT_BS_FREE 0x00000000
+/*
+ * The device is working as master and has claimed the control on the
+ * I2C-bus (busy master).
+ */
+#define I2C_BUS_STAT_BS_BM 0x00000002
+
+/* Fields of "I2C RUN Control Register" */
+/* Enable */
+#define I2C_RUN_CTRL_RUN_EN 0x00000001
+
+/* Fields of "I2C End Data Control Register" */
+/*
+ * Set End of Transmission
+ * Note:Do not write '1' to this bit when bus is free. This will cause an
+ * abort after the first byte when a new transfer is started.
+ */
+#define I2C_ENDD_CTRL_SETEND 0x00000002
+
+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
+/* NACK */
+#define I2C_P_IRQSS_NACK 0x00000010
+/* AL */
+#define I2C_P_IRQSS_AL 0x00000008
+/* RX */
+#define I2C_P_IRQSS_RX 0x00000040
+/* TX_END */
+#define I2C_P_IRQSS_TX_END 0x00000020
+
+
+#endif /* I2C_LANTIQ_H */