1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
From 427a938858630fe4cec1b3829624676a4106d236 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 6 Jan 2016 21:55:10 +0100
Subject: [PATCH 24/91] dt-bindings: add MediaTek PCIe binding documentation
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../devicetree/bindings/pci/mediatek-pcie.txt | 140 ++++++++++++++++++++
1 file changed, 140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 0000000..8fea3ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,140 @@
+Mediatek PCIe controller
+
+Required properties:
+- compatible: Should be one of:
+ - "mediatek,mt2701-pcie"
+ - "mediatek,mt7623-pcie"
+- device_type: Must be "pci"
+- reg: A list of physical base address and length for each set of controller
+ registers. A list of register ranges to use. Must contain an
+ entry for each entry in the reg-names property.
+- reg-names: Must include the following entries:
+ "pcie": PCIe registers
+ "pcie phy0": PCIe PHY0 registers
+ "pcie phy1": PCIe PHY0 registers
+ "pcie phy2": PCIe PHY0 registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ "pcie0": The interrupt that is asserted for port0
+ "pcie1": The interrupt that is asserted for port1
+ "pcie2": The interrupt that is asserted for port2
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+ PCI regions. The entries must be 6 cells each.
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - pcie0
+ - pcie1
+ - pcie2
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - pcie0
+ - pcie1
+ - pcie2
+- mediatek,hifsys: Must contain a phandle to the HIFSYS syscon range.
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: Must be "pci"
+- assigned-addresses: Address and size of the port configuration registers
+- reg: PCI bus address of the root port
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+
+Example:
+
+SoC DTSI:
+
+ hifsys: clock-controller@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pcie-controller@1a140000 {
+ compatible = "mediatek,mt7623-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x8000>, /* PCI-Express registers */
+ <0 0x1a149000 0 0x1000>, /* PCI-Express PHY0 */
+ <0 0x1a14a000 0 0x1000>, /* PCI-Express PHY1 */
+ <0 0x1a244000 0 0x1000>; /* PCI-Express PHY2 */
+ reg-names = "pcie", "pcie phy0", "pcie phy1", "pcie phy2";
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie0", "pcie1", "pcie2";
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "pcie";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+ reset-names = "pcie0", "pice1", "pcie2";
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ mediatek,hifsys = <&hifsys>;
+
+ ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* io space */
+ 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* pci memory */
+
+ status = "disabled";
+
+ pcie@1,0 {
+ device_type = "pci";
+ reg = <0x0800 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+ };
+
+ pcie@2,0{
+ device_type = "pci";
+ reg = <0x1000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+ };
+
+ pcie@3,0{
+ device_type = "pci";
+ reg = <0x1800 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+ };
+ };
+
+Board DTS:
+
+ pcie-controller {
+ status = "okay";
+
+ pci@1,0 {
+ status = "okay";
+ };
+ };
--
1.7.10.4
|
