1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
From 9dd4e96d415d1e1910ec42058729380cddb22f9d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Mar 2016 14:32:07 +0200
Subject: [PATCH 78/91] net: mediatek: update the IRQ part of the binding
document
The current binding document only describes a single interrupt. Update the
document by adding the 2 other interrupts.
The driver currently only uses a single interrupt. The HW is however able
to using IRQ grouping to split TX and RX onto separate GIC irqs.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/net/mediatek-net.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 5ca7929..32eaaca 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
Required properties:
- compatible: Should be "mediatek,mt7623-eth"
- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
+- interrupts: Should contain the three frame engines interrupts in numeric
+ order. These are fe_int0, fe_int1 and fe_int2.
- clocks: the clock used by the core
- clock-names: the names of the clock listed in the clocks property. These are
"ethif", "esw", "gp2", "gp1"
@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
<ðsys CLK_ETHSYS_GP2>,
<ðsys CLK_ETHSYS_GP1>;
clock-names = "ethif", "esw", "gp2", "gp1";
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
+ GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
+ GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
resets = <ðsys MT2701_ETHSYS_ETH_RST>;
reset-names = "eth";
--
1.7.10.4
|
