summaryrefslogtreecommitdiff
path: root/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch
blob: fea668d4fd7aacc8cf6539d947846e5a93db9ae0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -487,6 +487,15 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
+config LEDS_TLC59116
+	tristate "LED driver for TLC59116F dimmer"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for Texas Instruments TLC59116F
+	  LED controller. It is generally only useful
+	  as a platform driver
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
+obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
--- /dev/null
+++ b/drivers/leds/leds-tlc59116.c
@@ -0,0 +1,498 @@
+/*
+ * Copyright 2014 Belkin Inc.
+ *
+ * Author: Belkin Inc.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for various TLC59116 I2C LED drivers
+  */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define TLC59116_LED_OFF	0x0	/* Output LOW */
+#define TLC59116_LED_ON	0x1	/* Output HI-Z */
+#define TLC59116_DIM	0x2	/* Dimming */
+#define TLC59116_BLINK	0x3	/* Blinking */
+
+#define TLC59116_PINS		16
+#define TLC59116_REG_MODE1	0x00	/* Mode register 0 */
+#define MODE1_RESPON_ADDR_MASK	0xF0
+#define MODE1_NORMAL_MODE	(0 << 4)
+#define MODE1_SPEED_MODE	(1 << 4)
+
+#define TLC59116_REG_MODE2	0x01	/* Mode register 1 */
+#define MODE2_DIM		(0 << 5)
+#define MODE2_BLINK		(1 << 5)
+#define MODE2_OCH_STOP                  (0 << 3)
+#define MODE2_OCH_ACK                   (1 << 3)
+
+#define TLC59116_REG_PWM0	0x02
+#define TLC59116_REG_PWM1	0x03
+#define TLC59116_REG_PWM2	0x04
+#define TLC59116_REG_PWM3	0x05
+#define TLC59116_REG_PWM4	0x06
+#define TLC59116_REG_PWM5	0x07
+#define TLC59116_REG_PWM6	0x08
+#define TLC59116_REG_PWM7	0x09
+#define TLC59116_REG_PWM8	0x0a
+#define TLC59116_REG_PWM9	0x0b
+#define TLC59116_REG_PWM10	0x0c
+#define TLC59116_REG_PWM11	0x0d
+#define TLC59116_REG_PWM12	0x0e
+#define TLC59116_REG_PWM13	0x0f
+#define TLC59116_REG_PWM14	0x10
+#define TLC59116_REG_PWM15	0x01
+
+#define TLC59116_REG_GRPPWM	0x12
+#define TLC59116_REG_GRPFREQ	0x13
+
+#define TLC59116_PERIOD_MIN	41	/* 41ms */
+#define TLC59116_PERIOD_MAX	10730	/* 10.73s */
+
+#define TLC59116_REG_LEDOUT0         0x14    /* LED [3:0] driver output state registers */              
+#define TLC59116_REG_LEDOUT1         0x15    /* LED [7:4] driver output state registers */
+#define TLC59116_REG_LEDOUT2         0x16    /* LED [11:8] driver output state registers */
+#define TLC59116_REG_LEDOUT3         0x17    /* LED [15:12] driver output state registers */
+
+#define GPIO0_MASK        0x3
+
+#define DEBUG 0
+
+#if DEBUG > 1
+#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg)
+#else
+#define led_dbg(fmt, arg...)
+#endif
+
+
+#if DEBUG > 0
+#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg)
+#else
+#define led_info(fmt, arg...)
+#endif
+
+enum tlc59116_type {
+	tlc59116,
+};
+
+struct tlc59116_chipdef {
+	int			bits;
+	u8			slv_addr;	/* 7-bit slave address mask */
+	int			slv_addr_shift;	/* Number of bits to ignore */
+};
+
+static struct tlc59116_chipdef tlc59116_chipdefs[] = {
+	[tlc59116] = {
+		.bits		= 16,
+		.slv_addr	= /* 1100xxx */ 0x68,
+		.slv_addr_shift	= 3,
+	},
+};
+
+static const struct i2c_device_id tlc59116_id[] = {
+	{ "tlc59116", tlc59116 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
+
+struct tlc59116_led {
+	struct tlc59116_chipdef	*chipdef;
+	struct i2c_client	*client;
+	struct work_struct	work;
+	spinlock_t		lock;
+	enum led_brightness	brightness;
+	struct led_classdev	led_cdev;
+	int			led_num;	/* 0 .. 8 potentially */
+	char			name[32];
+};
+
+//#define DUMP_REGS
+
+#ifdef DUMP_REGS
+void dump_regs(struct i2c_client *client)
+{
+        int i, j = 0;
+        u8 data;
+        printk ("\n-------------------------------------\n");
+        for (i = 0; i< 0x20; i++)
+        {
+                data = i2c_smbus_read_byte_data(client, i);
+		printk ("[0x%x] = 0x%x ",i, data);
+                j++;
+                if (j == 5)
+                {
+                        printk ("\n");
+                        j = 0;
+                }
+        }
+        printk ("\n");
+}
+#endif
+
+static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode)
+{
+	uint8_t val = 0;
+	
+	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
+		mode = MODE2_DIM;
+
+	/* Configure MODE1 register */
+	val &= 0x0;
+	val &= MODE1_RESPON_ADDR_MASK;
+	val |= MODE1_NORMAL_MODE;
+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val);
+
+        /* Configure MODE2 Reg */
+        val &= 0x00;
+        val |= MODE2_OCH_STOP;
+
+        val |= mode;
+
+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val);
+        mdelay(100);
+	
+	return 0;
+}
+
+static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode)
+{
+        char data, addr = 0, i;
+
+        if ((gpio_no >= 0) && (gpio_no < 4))
+                addr = TLC59116_REG_LEDOUT0;
+        else if ((gpio_no >= 4) && (gpio_no < 8))
+                addr = TLC59116_REG_LEDOUT1;
+        else if ((gpio_no >= 8) && (gpio_no < 12))
+                addr = TLC59116_REG_LEDOUT2;
+        else if ((gpio_no >=12 ) && (gpio_no < 16))
+                addr = TLC59116_REG_LEDOUT3;
+
+        data = i2c_smbus_read_byte_data(client, addr);
+
+        i = (gpio_no % 4) * 2;
+
+        data &= ~(GPIO0_MASK << i);
+        act_mode = act_mode << i;
+        data |= act_mode;
+
+        if(i2c_smbus_write_byte_data(client, addr, data) != 0) {
+                return -1;
+        }
+        return 0;
+}
+
+static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val)
+{
+	val &= 0x03;
+        tlc59116_set_gpio_act(client, gpio_no, val);
+#ifdef DUMP_REGS
+	dump_regs(client);
+#endif
+        return 0;
+}
+
+static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no)
+{
+	uint8_t val, reg, data;
+	
+	led_dbg("gpio = %d\n", gpio_no);
+	reg = TLC59116_REG_LEDOUT0;
+
+        if ((gpio_no >= 0) && (gpio_no < 4))
+                reg = TLC59116_REG_LEDOUT0;
+        else if ((gpio_no >= 4) && (gpio_no < 8)) {
+                reg = TLC59116_REG_LEDOUT1;
+		gpio_no = gpio_no - 4;
+	}
+        else if ((gpio_no >= 8) && (gpio_no < 12)) {
+                reg = TLC59116_REG_LEDOUT2;
+		gpio_no = gpio_no - 8;
+	}
+        else if ((gpio_no >=12 ) && (gpio_no < 16)) {
+                reg = TLC59116_REG_LEDOUT3;
+		gpio_no = gpio_no - 12;
+	}
+	
+	val = i2c_smbus_read_byte_data(client, reg);
+
+	data = (val >> (gpio_no * 2)) & 0x03;
+	return data;
+}
+
+/*
+ * gpio_no [0..7]
+ * duty_cycle [0..99]%
+ * 
+ * */
+static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness)
+{
+	uint8_t pwm;
+
+	pwm = gpio_no + TLC59116_REG_PWM0;
+        i2c_smbus_write_byte_data(client, pwm, brightness);
+
+        return 0;
+}
+
+static void tlc59116_led_work(struct work_struct *work)
+{
+	struct tlc59116_led *tlc59116;
+
+	tlc59116 = container_of(work, struct tlc59116_led, work);
+
+	led_dbg("\nbrighness = %d \n", tlc59116->brightness);
+	switch (tlc59116->brightness) {
+	case LED_OFF:
+		led_info("\nLed off\n");
+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF);
+		break;
+
+	case LED_FULL:
+		led_info("\nLed on\n");
+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON);
+		break;
+	default:
+		led_info("\nBrightness is %d\n", tlc59116->brightness);
+		if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num))
+			tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM);
+
+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
+		break;
+	}
+
+}
+
+static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	struct tlc59116_led *tlc59116;
+
+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
+
+	spin_lock(&tlc59116->lock);
+	tlc59116->brightness = value;
+
+	/*
+	 * Must use workqueue for the actual I/O since I2C operations
+	 * can sleep.
+	 */
+	schedule_work(&tlc59116->work);
+
+	spin_unlock(&tlc59116->lock);
+}
+
+/*
+ * delay_on, delay_off: units are in ms
+ *
+ */
+
+static int tlc59116_set_blink(struct led_classdev *led_cdev,
+				unsigned long *delay_on,
+				unsigned long *delay_off)
+{
+	struct tlc59116_led *tlc59116;
+	uint16_t	period;
+	uint16_t	duty_cycle;
+	uint8_t		gdc;
+	uint8_t		gfrq;
+	
+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
+	led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n", 
+				*delay_on, *delay_off, tlc59116->brightness);
+
+	// Hardware blinking only for tricolor leds . The rest will have software blinking
+	if (tlc59116->led_num > 2) 
+		return 1;
+
+	if ((*delay_on == 0) && (*delay_off ==0)) {
+		spin_lock(&tlc59116->lock);
+
+		/* MODE2[DMBLNK] = 1 */
+		tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
+
+		/* Set LDRx = 11 */
+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
+
+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
+		spin_unlock(&tlc59116->lock);
+		return 0;
+	}
+
+
+	if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX)
+	{
+		led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX);
+		return -EINVAL;
+	}
+
+	if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN)
+	{
+		*delay_on = TLC59116_PERIOD_MIN/2 + 1;
+		*delay_off = TLC59116_PERIOD_MIN/2 + 1;
+	}
+	period = (*delay_on) + (*delay_off);
+
+	duty_cycle = (100 * (*delay_on)) / period;
+
+	spin_lock(&tlc59116->lock);
+	
+	/* MODE2[DMBLNK] = 1 */
+	tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
+
+	/* Set LDRx = 11 */
+	tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
+
+	tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
+
+	gdc = (duty_cycle * 256)/100;
+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc);	
+
+	gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */
+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq);		
+	
+
+#ifdef DUMP_REGS
+	dump_regs(tlc59116->client);
+#endif
+
+	spin_unlock(&tlc59116->lock);
+	return 0;
+}
+
+static int tlc59116_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct tlc59116_led *tlc59116;
+	struct tlc59116_chipdef *chip;
+	struct i2c_adapter *adapter;
+	struct led_platform_data *pdata;
+	int i, err;
+
+	chip = &tlc59116_chipdefs[id->driver_data];
+	adapter = to_i2c_adapter(client->dev.parent);
+	pdata = client->dev.platform_data;
+
+	/* Make sure the slave address / chip type combo given is possible */
+	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
+	    chip->slv_addr) {
+		dev_err(&client->dev, "invalid slave address %02x\n",
+				client->addr);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at "
+			"slave address 0x%02x\n",
+			id->name, chip->bits, client->addr);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return -EIO;
+
+	if (pdata) {
+		if (pdata->num_leds != chip->bits) {
+			dev_err(&client->dev, "board info claims %d LEDs"
+					" on a %d-bit chip\n",
+					pdata->num_leds, chip->bits);
+			return -ENODEV;
+		}
+	}
+
+	tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL);
+	if (!tlc59116)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tlc59116);
+
+	for (i = 0; i < chip->bits; i++) {
+		tlc59116[i].chipdef = chip;
+		tlc59116[i].client = client;
+		tlc59116[i].led_num = i;
+
+		/* Platform data can specify LED names and default triggers */
+		if (pdata) {
+			if (pdata->leds[i].name)
+				snprintf(tlc59116[i].name,
+					 sizeof(tlc59116[i].name), "tlc59116:%s",
+					 pdata->leds[i].name);
+			if (pdata->leds[i].default_trigger)
+				tlc59116[i].led_cdev.default_trigger =
+					pdata->leds[i].default_trigger;
+		} else {
+			snprintf(tlc59116[i].name, sizeof(tlc59116[i].name),
+				 "tlc59116:%d", i);
+		}
+
+		spin_lock_init(&tlc59116[i].lock);
+
+		tlc59116[i].led_cdev.name = tlc59116[i].name;
+		tlc59116[i].led_cdev.brightness_set = tlc59116_led_set;
+	        tlc59116[i].led_cdev.blink_set = tlc59116_set_blink;	
+		tlc59116[i].led_cdev.brightness = 0;
+
+		INIT_WORK(&tlc59116[i].work, tlc59116_led_work);
+
+		err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev);
+		if (err < 0)
+			goto exit;
+	}
+		
+        tlc59116_set_mode(client, MODE2_DIM);
+
+	/* Turn off LEDs */
+	for (i = 0; i < chip->bits; i++)
+		tlc59116_set_gpio(client, i, TLC59116_LED_OFF);
+
+	return 0;
+
+exit:
+	while (i--) {
+		led_classdev_unregister(&tlc59116[i].led_cdev);
+		cancel_work_sync(&tlc59116[i].work);
+	}
+
+	devm_kfree(&client->dev, tlc59116);
+	i2c_set_clientdata(client, NULL);
+
+	return err;
+}
+
+static int tlc59116_remove(struct i2c_client *client)
+{
+	struct tlc59116_led *tlc59116 = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < tlc59116->chipdef->bits; i++) {
+		led_classdev_unregister(&tlc59116[i].led_cdev);
+		cancel_work_sync(&tlc59116[i].work);
+	}
+
+	devm_kfree(&client->dev, tlc59116);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static struct i2c_driver tlc59116_driver = {
+	.driver = {
+		.name	= "leds-tlc59116",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= tlc59116_probe,
+	.remove	= tlc59116_remove,
+	.id_table = tlc59116_id,
+};
+
+module_i2c_driver(tlc59116_driver);
+
+MODULE_AUTHOR("Belkin Inc.");
+MODULE_DESCRIPTION("TLC59116 LED driver");
+MODULE_LICENSE("GPL v2");