summaryrefslogtreecommitdiff
path: root/target/linux/ramips/dts/UBNT-ERX.dts
blob: 0014ac766f0539f8d68de508cfc089979cc2336c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
#include <dt-bindings/input/input.h>

/dts-v1/;

#include "mt7621.dtsi"

/ {
	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
	model = "UBNT-ERX";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x10000000>;
	};

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	palmbus@1E000000 {
		spi@b00 {
			/* This board has 2Mb spi flash soldered in and visible
			   from manufacturer's firmware.
			   But this SoC shares spi and nand pins,
			   and current driver does't handle this sharing well */
			status = "disabled";
			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "m25p80";
				reg = <1>;
				linux,modalias = "m25p80";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "spi";
					reg = <0x0 0x200000>;
					read-only;
				};
			};
		};
	};

	nand@1e003000 {
		compatible = "mtk,mt7621-nand";
		bank-width = <2>;
		reg = <0x1e003000 0x800
		       0x1e003800 0x800>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x80000>;
			read-only;
		};

		partition@80000 {
			label = "u-boot-env";
			reg = <0x80000 0x60000>;
			read-only;
		};

		factory: partition@e0000 {
			label = "factory";
			reg = <0xe0000 0x60000>;
		};

		partition@140000 {
			label = "kernel1";
			reg = <0x140000 0x300000>;
		};

		partition@440000 {
			label = "kernel2";
			reg = <0x440000 0x300000>;
		};

		partition@740000 {
			label = "ubi";
			reg = <0x740000 0xf7c0000>;
		};

	};

	ethernet@1e100000 {
		mtd-mac-address = <&factory 0x22>;
	};

	pinctrl {
		state_default: pinctrl0 {
			gpio {
				ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
				ralink,function = "gpio";
			};
		};
	};

	sdhci@1E130000 {
		status = "disabled";
	};

	pcie@1e140000 {
		status = "disabled";
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 12 1>;
			linux,code = <KEY_RESTART>;
		};
	};
};