1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
From 5ad283c69029a519681ed453e7f7ddf250c10559 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 18 Nov 2015 03:51:24 +0100
Subject: [PATCH 507/513] net-next: mediatek: add support for rt3883
Add support for rt3883 and its smaller version rt3662. They both have a single
gBit port that will normally be attached to an external phy of switch.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
---
drivers/net/ethernet/mediatek/soc_rt3883.c | 75 ++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 drivers/net/ethernet/mediatek/soc_rt3883.c
diff --git a/drivers/net/ethernet/mediatek/soc_rt3883.c b/drivers/net/ethernet/mediatek/soc_rt3883.c
new file mode 100644
index 0000000..7f34d4d
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/soc_rt3883.c
@@ -0,0 +1,75 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT3883_RSTCTRL_FE BIT(21)
+
+static void rt3883_fe_reset(void)
+{
+ fe_reset(RT3883_RSTCTRL_FE);
+}
+
+static int rt3883_fwd_config(struct fe_priv *priv)
+{
+ int ret;
+
+ ret = fe_set_clock_cycle(priv);
+ if (ret)
+ return ret;
+
+ fe_fwd_config(priv);
+ fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
+ fe_csum_config(priv);
+
+ return ret;
+}
+
+static void rt3883_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
+}
+
+static struct fe_soc_data rt3883_data = {
+ .init_data = rt3883_init_data,
+ .reset_fe = rt3883_fe_reset,
+ .fwd_config = rt3883_fwd_config,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .rx_int = FE_RX_DONE_INT,
+ .tx_int = FE_TX_DONE_INT,
+ .status_int = FE_CNT_GDM_AF,
+ .checksum_bit = RX_DMA_L4VALID,
+ .mdio_read = rt2880_mdio_read,
+ .mdio_write = rt2880_mdio_write,
+ .mdio_adjust_link = rt2880_mdio_link_adjust,
+ .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
--
1.7.10.4
|
