summaryrefslogtreecommitdiff
path: root/target/linux/ramips/patches-4.4/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch
blob: d13bda7a0847cce2755545edd641fc26419dd3de (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
From 2c39ddc83452c34fedc86261ed1f96d7537adfd1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 14 Dec 2015 21:28:10 +0100
Subject: [PATCH 502/513] net-next: mediatek: add switch driver for rt3050

This driver is very basic and only provides basic init and irq support.
Switchdev support for this device will follow.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 drivers/net/ethernet/mediatek/esw_rt3050.c |  640 ++++++++++++++++++++++++++++
 drivers/net/ethernet/mediatek/esw_rt3050.h |   29 ++
 2 files changed, 669 insertions(+)
 create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c
 create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h

--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
@@ -0,0 +1,640 @@
+/*   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+
+#include <linux/ioport.h>
+#include <linux/mii.h>
+
+#include <ralink_regs.h>
+
+/* HW limitations for this switch:
+ * - No large frame support (PKT_MAX_LEN at most 1536)
+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
+ *   though this might be possible using the undocumented PPE.
+ */
+
+#define RT305X_ESW_REG_ISR		0x00
+#define RT305X_ESW_REG_IMR		0x04
+#define RT305X_ESW_REG_FCT0		0x08
+#define RT305X_ESW_REG_PFC1		0x14
+#define RT305X_ESW_REG_ATS		0x24
+#define RT305X_ESW_REG_ATS0		0x28
+#define RT305X_ESW_REG_ATS1		0x2c
+#define RT305X_ESW_REG_ATS2		0x30
+#define RT305X_ESW_REG_PVIDC(_n)	(0x40 + 4 * (_n))
+#define RT305X_ESW_REG_VLANI(_n)	(0x50 + 4 * (_n))
+#define RT305X_ESW_REG_VMSC(_n)		(0x70 + 4 * (_n))
+#define RT305X_ESW_REG_POA		0x80
+#define RT305X_ESW_REG_FPA		0x84
+#define RT305X_ESW_REG_SOCPC		0x8c
+#define RT305X_ESW_REG_POC0		0x90
+#define RT305X_ESW_REG_POC1		0x94
+#define RT305X_ESW_REG_POC2		0x98
+#define RT305X_ESW_REG_SGC		0x9c
+#define RT305X_ESW_REG_STRT		0xa0
+#define RT305X_ESW_REG_PCR0		0xc0
+#define RT305X_ESW_REG_PCR1		0xc4
+#define RT305X_ESW_REG_FPA2		0xc8
+#define RT305X_ESW_REG_FCT2		0xcc
+#define RT305X_ESW_REG_SGC2		0xe4
+#define RT305X_ESW_REG_P0LED		0xa4
+#define RT305X_ESW_REG_P1LED		0xa8
+#define RT305X_ESW_REG_P2LED		0xac
+#define RT305X_ESW_REG_P3LED		0xb0
+#define RT305X_ESW_REG_P4LED		0xb4
+#define RT305X_ESW_REG_PXPC(_x)		(0xe8 + (4 * _x))
+#define RT305X_ESW_REG_P1PC		0xec
+#define RT305X_ESW_REG_P2PC		0xf0
+#define RT305X_ESW_REG_P3PC		0xf4
+#define RT305X_ESW_REG_P4PC		0xf8
+#define RT305X_ESW_REG_P5PC		0xfc
+
+#define RT305X_ESW_LED_LINK		0
+#define RT305X_ESW_LED_100M		1
+#define RT305X_ESW_LED_DUPLEX		2
+#define RT305X_ESW_LED_ACTIVITY		3
+#define RT305X_ESW_LED_COLLISION	4
+#define RT305X_ESW_LED_LINKACT		5
+#define RT305X_ESW_LED_DUPLCOLL		6
+#define RT305X_ESW_LED_10MACT		7
+#define RT305X_ESW_LED_100MACT		8
+/* Additional led states not in datasheet: */
+#define RT305X_ESW_LED_BLINK		10
+#define RT305X_ESW_LED_ON		12
+
+#define RT305X_ESW_LINK_S		25
+#define RT305X_ESW_DUPLEX_S		9
+#define RT305X_ESW_SPD_S		0
+
+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S	16
+#define RT305X_ESW_PCR0_WT_PHY_CMD	BIT(13)
+#define RT305X_ESW_PCR0_CPU_PHY_REG_S	8
+
+#define RT305X_ESW_PCR1_WT_DONE		BIT(0)
+
+#define RT305X_ESW_ATS_TIMEOUT		(5 * HZ)
+#define RT305X_ESW_PHY_TIMEOUT		(5 * HZ)
+
+#define RT305X_ESW_PVIDC_PVID_M		0xfff
+#define RT305X_ESW_PVIDC_PVID_S		12
+
+#define RT305X_ESW_VLANI_VID_M		0xfff
+#define RT305X_ESW_VLANI_VID_S		12
+
+#define RT305X_ESW_VMSC_MSC_M		0xff
+#define RT305X_ESW_VMSC_MSC_S		8
+
+#define RT305X_ESW_SOCPC_DISUN2CPU_S	0
+#define RT305X_ESW_SOCPC_DISMC2CPU_S	8
+#define RT305X_ESW_SOCPC_DISBC2CPU_S	16
+#define RT305X_ESW_SOCPC_CRC_PADDING	BIT(25)
+
+#define RT305X_ESW_POC0_EN_BP_S		0
+#define RT305X_ESW_POC0_EN_FC_S		8
+#define RT305X_ESW_POC0_DIS_RMC2CPU_S	16
+#define RT305X_ESW_POC0_DIS_PORT_M	0x7f
+#define RT305X_ESW_POC0_DIS_PORT_S	23
+
+#define RT305X_ESW_POC2_UNTAG_EN_M	0xff
+#define RT305X_ESW_POC2_UNTAG_EN_S	0
+#define RT305X_ESW_POC2_ENAGING_S	8
+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S	16
+
+#define RT305X_ESW_SGC2_DOUBLE_TAG_M	0x7f
+#define RT305X_ESW_SGC2_DOUBLE_TAG_S	0
+#define RT305X_ESW_SGC2_LAN_PMAP_M	0x3f
+#define RT305X_ESW_SGC2_LAN_PMAP_S	24
+
+#define RT305X_ESW_PFC1_EN_VLAN_M	0xff
+#define RT305X_ESW_PFC1_EN_VLAN_S	16
+#define RT305X_ESW_PFC1_EN_TOS_S	24
+
+#define RT305X_ESW_VLAN_NONE		0xfff
+
+#define RT305X_ESW_GSC_BC_STROM_MASK	0x3
+#define RT305X_ESW_GSC_BC_STROM_SHIFT	4
+
+#define RT305X_ESW_GSC_LED_FREQ_MASK	0x3
+#define RT305X_ESW_GSC_LED_FREQ_SHIFT	23
+
+#define RT305X_ESW_POA_LINK_MASK	0x1f
+#define RT305X_ESW_POA_LINK_SHIFT	25
+
+#define RT305X_ESW_PORT_ST_CHG		BIT(26)
+#define RT305X_ESW_PORT0		0
+#define RT305X_ESW_PORT1		1
+#define RT305X_ESW_PORT2		2
+#define RT305X_ESW_PORT3		3
+#define RT305X_ESW_PORT4		4
+#define RT305X_ESW_PORT5		5
+#define RT305X_ESW_PORT6		6
+
+#define RT305X_ESW_PMAP_LLLLLL		0x3f
+#define RT305X_ESW_PMAP_LLLLWL		0x2f
+#define RT305X_ESW_PMAP_WLLLLL		0x3e
+
+#define RT305X_ESW_PORTS_INTERNAL					\
+		(BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |	\
+		 BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |	\
+		 BIT(RT305X_ESW_PORT4))
+
+#define RT305X_ESW_PORTS_NOCPU						\
+		(RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
+
+#define RT305X_ESW_PORTS_CPU	BIT(RT305X_ESW_PORT6)
+
+#define RT305X_ESW_PORTS_ALL						\
+		(RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
+
+#define RT305X_ESW_NUM_PORTS		7
+#define RT305X_ESW_NUM_LEDS		5
+
+#define RT5350_EWS_REG_LED_POLARITY	0x168
+#define RT5350_RESET_EPHY		BIT(24)
+
+struct esw_port {
+	bool	disable;
+	u8	led;
+};
+
+struct rt305x_esw {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq;
+
+	/* Protects against concurrent register r/w operations. */
+	spinlock_t		reg_rw_lock;
+
+	unsigned char		port_map;
+	unsigned int		reg_led_polarity;
+
+	struct esw_port ports[RT305X_ESW_NUM_PORTS];
+
+};
+
+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
+{
+	__raw_writel(val, esw->base + reg);
+}
+
+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
+{
+	return __raw_readl(esw->base + reg);
+}
+
+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
+			       unsigned long mask, unsigned long val)
+{
+	unsigned long t;
+
+	t = __raw_readl(esw->base + reg) & ~mask;
+	__raw_writel(t | val, esw->base + reg);
+}
+
+static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
+		    unsigned long mask, unsigned long val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&esw->reg_rw_lock, flags);
+	esw_rmw_raw(esw, reg, mask, val);
+	spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
+}
+
+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
+			    u32 phy_register, u32 write_data)
+{
+	unsigned long t_start = jiffies;
+	int ret = 0;
+
+	while (1) {
+		if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
+		      RT305X_ESW_PCR1_WT_DONE))
+			break;
+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+			ret = 1;
+			goto out;
+		}
+	}
+
+	write_data &= 0xffff;
+	esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
+		      (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
+		      (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
+		RT305X_ESW_REG_PCR0);
+
+	t_start = jiffies;
+	while (1) {
+		if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
+			    RT305X_ESW_PCR1_WT_DONE)
+			break;
+
+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+			ret = 1;
+			break;
+		}
+	}
+out:
+	if (ret)
+		dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
+	return ret;
+}
+
+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+{
+	unsigned reg;
+
+	reg = esw_r32(esw, RT305X_ESW_REG_POC0);
+	return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
+	       RT305X_ESW_POC0_DIS_PORT_M;
+}
+
+static void esw_hw_init(struct rt305x_esw *esw)
+{
+	int i;
+	u8 port_disable = 0;
+	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
+
+	/* vodoo from original driver */
+	esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
+	esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
+	/* Port priority 1 for all ports, vlan enabled. */
+	esw_w32(esw, 0x00005555 |
+		     (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
+		RT305X_ESW_REG_PFC1);
+
+	/* Enable Back Pressure, and Flow Control */
+	esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
+		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
+		RT305X_ESW_REG_POC0);
+
+	/* Enable Aging, and VLAN TAG removal */
+	esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
+		      (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
+		RT305X_ESW_REG_POC2);
+
+	esw_w32(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
+
+	/* 300s aging timer, max packet len 1536, broadcast storm prevention
+	 * disabled, disable collision abort, mac xor48 hash, 10 packet back
+	 * pressure jam, GMII disable was_transmit, back pressure disabled,
+	 * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
+	 * ports.
+	 */
+	esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
+
+	/* Setup SoC Port control register */
+	esw_w32(esw,
+		(RT305X_ESW_SOCPC_CRC_PADDING |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
+		(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
+		RT305X_ESW_REG_SOCPC);
+
+	/* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
+	 * turbo mii off, rgmi 3.3v off
+	 * port5: disabled
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	 */
+	esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
+	esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
+
+	/* Force Link/Activity on ports */
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
+	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
+
+	/* Copy disabled port configuration from bootloader setup */
+	port_disable = esw_get_port_disable(esw);
+	for (i = 0; i < 6; i++)
+		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+
+	if (ralink_soc == RT305X_SOC_RT3352) {
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient LSB=0 disable PHY */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7016);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0038);
+		}
+
+		/* select global register */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* enlarge agcsel threshold 3 and threshold 2 */
+		rt305x_mii_write(esw, 0, 1, 0x4a40);
+		/* enlarge agcsel threshold 5 and threshold 4 */
+		rt305x_mii_write(esw, 0, 2, 0x6254);
+		/* enlarge agcsel threshold  */
+		rt305x_mii_write(esw, 0, 3, 0xa17f);
+		rt305x_mii_write(esw, 0, 12, 0x7eaa);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* increased squelch pulse count threshold. */
+		rt305x_mii_write(esw, 0, 16, 0x0684);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* tune TP_IDL tail and head waveform, enable power
+		 * down slew rate control
+		 */
+		rt305x_mii_write(esw, 0, 22, 0x253f);
+		/* set PLL/Receive bias current are calibrated */
+		rt305x_mii_write(esw, 0, 27, 0x2fda);
+		/* change PLL/Receive bias current to internal(RT3350) */
+		rt305x_mii_write(esw, 0, 28, 0xc410);
+		/* change PLL bias current to internal(RT3052_MP3) */
+		rt305x_mii_write(esw, 0, 29, 0x598b);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	} else if (ralink_soc == RT305X_SOC_RT5350) {
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		/* set the led polarity */
+		esw_w32(esw, esw->reg_led_polarity & 0x1F,
+			RT5350_EWS_REG_LED_POLARITY);
+
+		/* local registers */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient LSB=0 disable PHY */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7015);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0038);
+		}
+
+		/* global registers */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* enlarge agcsel threshold 3 and threshold 2 */
+		rt305x_mii_write(esw, 0, 1, 0x4a40);
+		/* enlarge agcsel threshold 5 and threshold 4 */
+		rt305x_mii_write(esw, 0, 2, 0x6254);
+		/* enlarge agcsel threshold 6 */
+		rt305x_mii_write(esw, 0, 3, 0xa17f);
+		rt305x_mii_write(esw, 0, 12, 0x7eaa);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* increased squelch pulse count threshold. */
+		rt305x_mii_write(esw, 0, 16, 0x0684);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* tune TP_IDL tail and head waveform, enable power
+		 * down slew rate control
+		 */
+		rt305x_mii_write(esw, 0, 22, 0x253f);
+		/* set PLL/Receive bias current are calibrated */
+		rt305x_mii_write(esw, 0, 27, 0x2fda);
+		/* change PLL/Receive bias current to internal(RT3350) */
+		rt305x_mii_write(esw, 0, 28, 0xc410);
+		/* change PLL bias current to internal(RT3052_MP3) */
+		rt305x_mii_write(esw, 0, 29, 0x598b);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	} else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
+		int i;
+
+		/* reset EPHY */
+		fe_reset(RT5350_RESET_EPHY);
+
+		rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
+		rt305x_mii_write(esw, 0, 26, 0x0020);
+
+		for (i = 0; i < 5; i++) {
+			rt305x_mii_write(esw, i, 31, 0x8000);
+			rt305x_mii_write(esw, i,  0, 0x3100);
+			rt305x_mii_write(esw, i, 30, 0xa000);
+			rt305x_mii_write(esw, i, 31, 0xa000);
+			rt305x_mii_write(esw, i, 16, 0x0606);
+			rt305x_mii_write(esw, i, 23, 0x0f0e);
+			rt305x_mii_write(esw, i, 24, 0x1610);
+			rt305x_mii_write(esw, i, 30, 0x1f15);
+			rt305x_mii_write(esw, i, 28, 0x6111);
+			rt305x_mii_write(esw, i, 31, 0x2000);
+			rt305x_mii_write(esw, i, 26, 0x0000);
+		}
+
+		/* 100Base AOI setting */
+		rt305x_mii_write(esw, 0, 31, 0x5000);
+		rt305x_mii_write(esw, 0, 19, 0x004a);
+		rt305x_mii_write(esw, 0, 20, 0x015a);
+		rt305x_mii_write(esw, 0, 21, 0x00ee);
+		rt305x_mii_write(esw, 0, 22, 0x0033);
+		rt305x_mii_write(esw, 0, 23, 0x020a);
+		rt305x_mii_write(esw, 0, 24, 0x0000);
+		rt305x_mii_write(esw, 0, 25, 0x024a);
+		rt305x_mii_write(esw, 0, 26, 0x035a);
+		rt305x_mii_write(esw, 0, 27, 0x02ee);
+		rt305x_mii_write(esw, 0, 28, 0x0233);
+		rt305x_mii_write(esw, 0, 29, 0x000a);
+		rt305x_mii_write(esw, 0, 30, 0x0000);
+	} else {
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+		for (i = 0; i < 5; i++) {
+			if (esw->ports[i].disable) {
+				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+			} else {
+				rt305x_mii_write(esw, i, MII_BMCR,
+						 BMCR_FULLDPLX |
+						 BMCR_ANENABLE |
+						 BMCR_SPEED100);
+			}
+			/* TX10 waveform coefficient */
+			rt305x_mii_write(esw, i, 26, 0x1601);
+			/* TX100/TX10 AD/DA current bias */
+			rt305x_mii_write(esw, i, 29, 0x7058);
+			/* TX100 slew rate control */
+			rt305x_mii_write(esw, i, 30, 0x0018);
+		}
+
+		/* PHY IOT */
+		/* select global register */
+		rt305x_mii_write(esw, 0, 31, 0x0);
+		/* tune TP_IDL tail and head waveform */
+		rt305x_mii_write(esw, 0, 22, 0x052f);
+		/* set TX10 signal amplitude threshold to minimum */
+		rt305x_mii_write(esw, 0, 17, 0x0fe0);
+		/* set squelch amplitude to higher threshold */
+		rt305x_mii_write(esw, 0, 18, 0x40ba);
+		/* longer TP_IDL tail length */
+		rt305x_mii_write(esw, 0, 14, 0x65);
+		/* select local register */
+		rt305x_mii_write(esw, 0, 31, 0x8000);
+	}
+
+	if (esw->port_map)
+		port_map = esw->port_map;
+	else
+		port_map = RT305X_ESW_PMAP_LLLLLL;
+
+	/* Unused HW feature, but still nice to be consistent here...
+	 * This is also exported to userspace ('lan' attribute) so it's
+	 * conveniently usable to decide which ports go into the wan vlan by
+	 * default.
+	 */
+	esw_rmw(esw, RT305X_ESW_REG_SGC2,
+		RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
+		port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
+
+	/* make the switch leds blink */
+	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
+		esw->ports[i].led = 0x05;
+
+	/* Only unmask the port change interrupt */
+	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+}
+
+static irqreturn_t esw_interrupt(int irq, void *_esw)
+{
+	struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
+	u32 status;
+
+	status = esw_r32(esw, RT305X_ESW_REG_ISR);
+	if (status & RT305X_ESW_PORT_ST_CHG) {
+		u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
+
+		link >>= RT305X_ESW_POA_LINK_SHIFT;
+		link &= RT305X_ESW_POA_LINK_MASK;
+		dev_info(esw->dev, "link changed 0x%02X\n", link);
+	}
+	esw_w32(esw, status, RT305X_ESW_REG_ISR);
+
+	return IRQ_HANDLED;
+}
+
+static int esw_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
+	struct device_node *np = pdev->dev.of_node;
+	const __be32 *port_map, *reg_init;
+	struct rt305x_esw *esw;
+	struct resource *irq;
+	int ret;
+
+	esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
+	if (!esw)
+		return -ENOMEM;
+
+	esw->dev = &pdev->dev;
+	esw->irq = irq->start;
+	esw->base = devm_ioremap_resource(&pdev->dev, res);
+	if (!esw->base)
+		return -EADDRNOTAVAIL;
+
+	port_map = of_get_property(np, "mediatek,portmap", NULL);
+	if (port_map)
+		esw->port_map = be32_to_cpu(*port_map);
+
+	reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
+	if (reg_init)
+		esw->reg_led_polarity = be32_to_cpu(*reg_init);
+
+	platform_set_drvdata(pdev, esw);
+
+	spin_lock_init(&esw->reg_rw_lock);
+
+	esw_hw_init(esw);
+
+	ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
+			       esw);
+
+	if (!ret) {
+		esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
+		esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+	}
+
+	return ret;
+}
+
+static int esw_remove(struct platform_device *pdev)
+{
+	struct rt305x_esw *esw = platform_get_drvdata(pdev);
+
+	if (esw) {
+		esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ralink_esw_match[] = {
+	{ .compatible = "ralink,rt3050-esw" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ralink_esw_match);
+
+static struct platform_driver esw_driver = {
+	.probe = esw_probe,
+	.remove = esw_remove,
+	.driver = {
+		.name = "rt3050-esw",
+		.owner = THIS_MODULE,
+		.of_match_table = ralink_esw_match,
+	},
+};
+
+int __init mtk_switch_init(void)
+{
+	return platform_driver_register(&esw_driver);
+}
+
+void mtk_switch_exit(void)
+{
+	platform_driver_unregister(&esw_driver);
+}
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.h
@@ -0,0 +1,29 @@
+/*   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#ifndef _RALINK_ESW_RT3052_H__
+#define _RALINK_ESW_RT3052_H__
+
+#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
+
+int __init mtk_switch_init(void);
+void mtk_switch_exit(void);
+
+#else
+
+static inline int __init mtk_switch_init(void) { return 0; }
+static inline void mtk_switch_exit(void) { }
+
+#endif
+#endif