path: root/target/linux/s3c24xx/patches-2.6.26/1008-gta01-jbt6k74.patch.patch

From 5b0814282e6878f7f2f07b98cc8b0128e7ea423d Mon Sep 17 00:00:00 2001
From: mokopatches <mokopatches@openmoko.org>
Date: Wed, 16 Jul 2008 14:44:48 +0100
Subject: [PATCH] gta01-jbt6k74.patch
 This driver adds support for the SPI-based control interface of the LCM (LCD
 Panel) found on the FIC GTA01 hardware.

The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
be able to drive any other diplay based on the JBT6K74-AS controller ASIC.

Signed-off-by: Harald Welte <laforge@openmoko.org>
---
 arch/arm/mach-s3c2410/Kconfig   |    1 +
 drivers/video/display/Kconfig   |   11 +
 drivers/video/display/Makefile  |    1 +
 drivers/video/display/jbt6k74.c |  678 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 691 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/display/jbt6k74.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7e3a1a2..58519e6 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -114,6 +114,7 @@ config MACH_VR1000
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select DISPLAY_JBT6K74
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig
index f99af93..f0da483 100644
--- a/drivers/video/display/Kconfig
+++ b/drivers/video/display/Kconfig
@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT
 comment "Display hardware drivers"
 	depends on DISPLAY_SUPPORT
 
+config DISPLAY_JBT6K74
+	tristate "TPO JBT6K74-AS TFT display ASIC control interface"
+	depends on SPI_MASTER && SYSFS
+	help
+	  SPI driver for the control interface of TFT panels containing
+	  the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
+	  TFT diplay module used in the FIC/OpenMoko Neo1973 GSM phones.
+
+	  The control interface is required for display operation, as it
+	  controls power management, display timing and gamma calibration.
+
 endmenu
diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile
index c0ea832..011b69d 100644
--- a/drivers/video/display/Makefile
+++ b/drivers/video/display/Makefile
@@ -3,4 +3,5 @@
 display-objs				:= display-sysfs.o
 
 obj-$(CONFIG_DISPLAY_SUPPORT)		+= display.o
+obj-$(CONFIG_DISPLAY_JBT6K74)		+= jbt6k74.o
 
diff --git a/drivers/video/display/jbt6k74.c b/drivers/video/display/jbt6k74.c
new file mode 100644
index 0000000..d021d7e
--- /dev/null
+++ b/drivers/video/display/jbt6k74.c
@@ -0,0 +1,678 @@
+/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
+ *
+ * Copyright (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>,
+ * 	   Stefan Schmidt <stefan@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <linux/spi/spi.h>
+
+enum jbt_register {
+	JBT_REG_SLEEP_IN		= 0x10,
+	JBT_REG_SLEEP_OUT		= 0x11,
+
+	JBT_REG_DISPLAY_OFF		= 0x28,
+	JBT_REG_DISPLAY_ON		= 0x29,
+
+	JBT_REG_RGB_FORMAT		= 0x3a,
+	JBT_REG_QUAD_RATE		= 0x3b,
+
+	JBT_REG_POWER_ON_OFF		= 0xb0,
+	JBT_REG_BOOSTER_OP		= 0xb1,
+	JBT_REG_BOOSTER_MODE		= 0xb2,
+	JBT_REG_BOOSTER_FREQ		= 0xb3,
+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
+	JBT_REG_VSC_VOLTAGE		= 0xb5,
+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
+	JBT_REG_EXT_DISPL		= 0xb7,
+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
+	JBT_REG_DCCLK_DCEV		= 0xb9,
+	JBT_REG_DISPLAY_MODE1		= 0xba,
+	JBT_REG_DISPLAY_MODE2		= 0xbb,
+	JBT_REG_DISPLAY_MODE		= 0xbc,
+	JBT_REG_ASW_SLEW		= 0xbd,
+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
+
+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
+
+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
+
+	/* VGA */
+	JBT_REG_BLANK_CONTROL		= 0xcf,
+	JBT_REG_BLANK_TH_TV		= 0xd0,
+	JBT_REG_CKV_ON_OFF		= 0xd1,
+	JBT_REG_CKV_1_2			= 0xd2,
+	JBT_REG_OEV_TIMING		= 0xd3,
+	JBT_REG_ASW_TIMING_1		= 0xd4,
+	JBT_REG_ASW_TIMING_2		= 0xd5,
+
+	/* QVGA */
+	JBT_REG_BLANK_CONTROL_QVGA	= 0xd6,
+	JBT_REG_BLANK_TH_TV_QVGA	= 0xd7,
+	JBT_REG_CKV_ON_OFF_QVGA		= 0xd8,
+	JBT_REG_CKV_1_2_QVGA		= 0xd9,
+	JBT_REG_OEV_TIMING_QVGA		= 0xde,
+	JBT_REG_ASW_TIMING_1_QVGA	= 0xdf,
+	JBT_REG_ASW_TIMING_2_QVGA	= 0xe0,
+
+
+	JBT_REG_HCLOCK_VGA		= 0xec,
+	JBT_REG_HCLOCK_QVGA		= 0xed,
+
+};
+
+enum jbt_state {
+	JBT_STATE_DEEP_STANDBY,
+	JBT_STATE_SLEEP,
+	JBT_STATE_NORMAL,
+	JBT_STATE_QVGA_NORMAL,
+};
+
+static const char *jbt_state_names[] = {
+	[JBT_STATE_DEEP_STANDBY]	= "deep-standby",
+	[JBT_STATE_SLEEP]		= "sleep",
+	[JBT_STATE_NORMAL]		= "normal",
+	[JBT_STATE_QVGA_NORMAL]		= "qvga-normal",
+};
+
+struct jbt_info {
+	enum jbt_state state, last_state;
+	struct spi_device *spi_dev;
+	struct mutex lock;		/* protects tx_buf and reg_cache */
+	u16 tx_buf[8];
+	u16 reg_cache[0xEE];
+};
+
+#define JBT_COMMAND	0x000
+#define JBT_DATA	0x100
+
+static int jbt_reg_write_nodata(struct jbt_info *jbt, u8 reg)
+{
+	int rc;
+
+	mutex_lock(&jbt->lock);
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       1*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = 0;
+
+	mutex_unlock(&jbt->lock);
+
+	return rc;
+}
+
+
+static int jbt_reg_write(struct jbt_info *jbt, u8 reg, u8 data)
+{
+	int rc;
+
+	mutex_lock(&jbt->lock);
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | data;
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       2*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = data;
+
+	mutex_unlock(&jbt->lock);
+
+	return rc;
+}
+
+static int jbt_reg_write16(struct jbt_info *jbt, u8 reg, u16 data)
+{
+	int rc;
+
+	mutex_lock(&jbt->lock);
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | (data >> 8);
+	jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
+
+	rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+		       3*sizeof(u16));
+	if (rc == 0)
+		jbt->reg_cache[reg] = data;
+
+	mutex_unlock(&jbt->lock);
+
+	return rc;
+}
+
+static int jbt_init_regs(struct jbt_info *jbt, int qvga)
+{
+	int rc;
+
+	dev_dbg(&jbt->spi_dev->dev, "entering %cVGA mode\n", qvga ? 'Q' : ' ');
+
+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
+	rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
+	rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
+	rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
+	rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
+	rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
+	rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
+	/*
+	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+	 * to avoid red / blue flicker
+	 */
+	rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x04);
+	rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+	rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+	if (!qvga) {
+		rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
+		rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
+		rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
+
+		rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
+		rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
+
+		rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
+		rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
+		rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
+	} else {
+		rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
+		rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
+		rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
+
+		rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
+		rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
+
+		rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
+		rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
+		rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
+	}
+
+	return rc ? -EIO : 0;
+}
+
+static int standby_to_sleep(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* three times command zero */
+	rc = jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	rc |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	rc |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+
+	/* deep standby out */
+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17);
+
+	return rc ? -EIO : 0;
+}
+
+static int sleep_to_normal(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
+
+	/* Quad mode off */
+	rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
+
+	/* AVDD on, XVDD on */
+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+	/* Sleep mode off */
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+
+	/* initialize register set */
+	rc |= jbt_init_regs(jbt, 0);
+
+	return rc ? -EIO : 0;
+}
+
+static int sleep_to_qvga_normal(struct jbt_info *jbt)
+{
+	int rc;
+
+	/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
+
+	/* Quad mode on */
+	rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
+
+	/* AVDD on, XVDD on */
+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+	/* Sleep mode off */
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+
+	/* initialize register set for qvga*/
+	rc |= jbt_init_regs(jbt, 1);
+
+	return rc ? -EIO : 0;
+}
+
+static int normal_to_sleep(struct jbt_info *jbt)
+{
+	int rc;
+
+	rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
+
+	return rc ? -EIO : 0;
+}
+
+static int sleep_to_standby(struct jbt_info *jbt)
+{
+	return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
+}
+
+/* frontend function */
+int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state)
+{
+	int rc = -EINVAL;
+
+	dev_dbg(&jbt->spi_dev->dev, "entering (old_state=%u, "
+		"new_state=%u)\n", jbt->state, new_state);
+
+	switch (jbt->state) {
+	case JBT_STATE_DEEP_STANDBY:
+		switch (new_state) {
+		case JBT_STATE_DEEP_STANDBY:
+			rc = 0;
+			break;
+		case JBT_STATE_SLEEP:
+			rc = standby_to_sleep(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+			/* first transition into sleep */
+			rc = standby_to_sleep(jbt);
+			/* then transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		case JBT_STATE_QVGA_NORMAL:
+			/* first transition into sleep */
+			rc = standby_to_sleep(jbt);
+			/* then transition into normal */
+			rc |= sleep_to_qvga_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_SLEEP:
+		switch (new_state) {
+		case JBT_STATE_SLEEP:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			rc = sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+			rc = sleep_to_normal(jbt);
+			break;
+		case JBT_STATE_QVGA_NORMAL:
+			rc = sleep_to_qvga_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_NORMAL:
+		switch (new_state) {
+		case JBT_STATE_NORMAL:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* then transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_SLEEP:
+			rc = normal_to_sleep(jbt);
+			break;
+		case JBT_STATE_QVGA_NORMAL:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* second transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			/* third transition into sleep */
+			rc |= standby_to_sleep(jbt);
+			/* fourth transition into normal */
+			rc |= sleep_to_qvga_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_STATE_QVGA_NORMAL:
+		switch (new_state) {
+		case JBT_STATE_QVGA_NORMAL:
+			rc = 0;
+			break;
+		case JBT_STATE_DEEP_STANDBY:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* then transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			break;
+		case JBT_STATE_SLEEP:
+			rc = normal_to_sleep(jbt);
+			break;
+		case JBT_STATE_NORMAL:
+			/* first transition into sleep */
+			rc = normal_to_sleep(jbt);
+			/* second transition into deep standby */
+			rc |= sleep_to_standby(jbt);
+			/* third transition into sleep */
+			rc |= standby_to_sleep(jbt);
+			/* fourth transition into normal */
+			rc |= sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	}
+	if (rc == 0)
+		jbt->state = new_state;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_enter_state);
+
+int jbt6k74_display_onoff(struct jbt_info *jbt, int on)
+{
+	if (on)
+		return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
+	else
+		return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+}
+EXPORT_SYMBOL_GPL(jbt6k74_display_onoff);
+
+static ssize_t state_read(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+
+	if (jbt->state >= ARRAY_SIZE(jbt_state_names))
+		return -EIO;
+
+	return sprintf(buf, "%s\n", jbt_state_names[jbt->state]);
+}
+
+static ssize_t state_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int i, rc;
+
+	for (i = 0; i < ARRAY_SIZE(jbt_state_names); i++) {
+		if (!strncmp(buf, jbt_state_names[i],
+			     strlen(jbt_state_names[i]))) {
+			rc = jbt6k74_enter_state(jbt, i);
+			if (rc)
+				return rc;
+			switch (i) {
+			case JBT_STATE_NORMAL:
+			case JBT_STATE_QVGA_NORMAL:
+				/* Enable display again after deep-standby */
+				rc = jbt6k74_display_onoff(jbt, 1);
+				if (rc)
+					return rc;
+				break;
+			default:
+				break;
+			}
+			return count;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(state, 0644, state_read, state_write);
+
+static int reg_by_string(const char *name)
+{
+	if (!strcmp(name, "gamma_fine1"))
+		return JBT_REG_GAMMA1_FINE_1;
+	else if (!strcmp(name, "gamma_fine2"))
+		return JBT_REG_GAMMA1_FINE_2;
+	else if (!strcmp(name, "gamma_inclination"))
+		return JBT_REG_GAMMA1_INCLINATION;
+	else
+		return JBT_REG_GAMMA1_BLUE_OFFSET;
+}
+
+static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	u16 val;
+
+	mutex_lock(&jbt->lock);
+	val = jbt->reg_cache[reg];
+	mutex_unlock(&jbt->lock);
+
+	return sprintf(buf, "0x%04x\n", val);
+}
+
+static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	jbt_reg_write(jbt, reg, val & 0xff);
+
+	return count;
+}
+
+static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
+
+static struct attribute *jbt_sysfs_entries[] = {
+	&dev_attr_state.attr,
+	&dev_attr_gamma_fine1.attr,
+	&dev_attr_gamma_fine2.attr,
+	&dev_attr_gamma_inclination.attr,
+	&dev_attr_gamma_blue_offset.attr,
+	NULL,
+};
+
+static struct attribute_group jbt_attr_group = {
+	.name	= NULL,
+	.attrs	= jbt_sysfs_entries,
+};
+
+/* linux device model infrastructure */
+
+static int __devinit jbt_probe(struct spi_device *spi)
+{
+	int rc;
+	struct jbt_info *jbt;
+
+	/* the controller doesn't have a MISO pin; we can't do detection */
+
+	spi->mode = SPI_CPOL | SPI_CPHA;
+	spi->bits_per_word = 9;
+
+	rc = spi_setup(spi);
+	if (rc < 0) {
+		dev_err(&spi->dev,
+			"error during spi_setup of jbt6k74 driver\n");
+		return rc;
+	}
+
+	jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
+	if (!jbt)
+		return -ENOMEM;
+
+	jbt->spi_dev = spi;
+	jbt->state = JBT_STATE_DEEP_STANDBY;
+	mutex_init(&jbt->lock);
+
+	dev_set_drvdata(&spi->dev, jbt);
+
+	rc = jbt6k74_enter_state(jbt, JBT_STATE_NORMAL);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot enter NORMAL state\n");
+		goto err_free_drvdata;
+	}
+
+	rc = jbt6k74_display_onoff(jbt, 1);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot switch display on\n");
+		goto err_standby;
+	}
+
+	rc = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
+	if (rc < 0) {
+		dev_err(&spi->dev, "cannot create sysfs group\n");
+		goto err_off;
+	}
+
+	return 0;
+
+err_off:
+	jbt6k74_display_onoff(jbt, 0);
+err_standby:
+	jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
+err_free_drvdata:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(jbt);
+
+	return rc;
+}
+
+static int __devexit jbt_remove(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	/* We don't want to switch off the display in case the user
+	 * accidentially onloads the module (whose use count normally is 0) */
+
+	sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(jbt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	/* Save mode for resume */
+	jbt->last_state = jbt->state;
+	jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
+
+	return 0;
+}
+
+static int jbt_resume(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	jbt6k74_enter_state(jbt, jbt->last_state);
+
+	switch (jbt->last_state) {
+	case JBT_STATE_NORMAL:
+	case JBT_STATE_QVGA_NORMAL:
+		jbt6k74_display_onoff(jbt, 1);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+#else
+#define jbt_suspend	NULL
+#define jbt_resume	NULL
+#endif
+
+static struct spi_driver jbt6k74_driver = {
+	.driver = {
+		.name	= "jbt6k74",
+		.owner	= THIS_MODULE,
+	},
+
+	.probe	 = jbt_probe,
+	.remove	 = __devexit_p(jbt_remove),
+	.suspend = jbt_suspend,
+	.resume	 = jbt_resume,
+};
+
+static int __init jbt_init(void)
+{
+	return spi_register_driver(&jbt6k74_driver);
+}
+
+static void __exit jbt_exit(void)
+{
+	spi_unregister_driver(&jbt6k74_driver);
+}
+
+MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(jbt_init);
+module_exit(jbt_exit);
-- 
1.5.6.3