1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -19,6 +19,49 @@
#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
/*
+ * Hynix H27UBG8T2BTR timings
+ * This chip has an exceptionally large tADL, which results in only supporting
+ * ONFI timing mode 0. Using these timings, the clock can be raised from
+ * 12.5MHz to 50MHz.
+ */
+const struct nand_sdr_timings hynix_h27ubg8t2btr_sdr_timing = {
+ .tADL_min = 200000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 100000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 20000,
+ .tDH_min = 5000,
+ .tDS_min = 10000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 20000,
+ .tREA_max = 16000,
+ .tREH_min = 8000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 5000,
+ .tRP_min = 10000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tRR_min = 20000,
+ .tWC_min = 20000,
+ .tWH_min = 10000,
+ .tWHR_min = 80000,
+ .tWP_min = 8000,
+ .tWW_min = 100000,
+};
+
+/*
* The chip ID list:
* name, device ID, page size, chip size in MiB, eraseblock size, options
*
@@ -50,6 +93,10 @@ struct nand_flash_dev nand_flash_ids[] =
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
4 },
+ {"H27UBG8T2BTR-BC 64G 3.3V 8-bit",
+ { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} },
+ SZ_8K, SZ_4K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+ 0, &hynix_h27ubg8t2btr_sdr_timing },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
|
