1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
|
From 5b3f9de4171368d9a99fa4c8b8b1bcc8505fb3c6 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Mon, 11 Jan 2010 04:29:44 +0100
Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-serial.patch
---
drivers/serial/8250.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 103 insertions(+), 1 deletions(-)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -196,7 +196,7 @@ static const struct serial8250_config ua
[PORT_16550A] = {
.name = "16550A",
.fifo_size = 16,
- .tx_loadsz = 16,
+ .tx_loadsz = 8,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO,
},
@@ -403,6 +403,10 @@ static unsigned int mem_serial_in(struct
static void mem_serial_out(struct uart_port *p, int offset, int value)
{
offset = map_8250_out_reg(p, offset) << p->regshift;
+#if defined(CONFIG_JZSOC)
+ if (offset == (UART_FCR << p->regshift))
+ value |= 0x10; /* set FCR.UUE */
+#endif
writeb(value, p->membase + offset);
}
@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u
serial_unlink_irq_chain(up);
}
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
+static unsigned short quot1[3] = {0}; /* quot[0]:baud_div, quot[1]:umr, quot[2]:uacr */
+static unsigned short * serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ int err, sum, i, j;
+ int a[12], b[12];
+ unsigned short div, umr, uacr;
+ unsigned short umr_best, div_best, uacr_best;
+ long long t0, t1, t2, t3;
+
+ sum = 0;
+ umr_best = div_best = uacr_best = 0;
+ div = 1;
+
+ if ((port->uartclk % (16 * baud)) == 0) {
+ quot1[0] = port->uartclk / (16 * baud);
+ quot1[1] = 16;
+ quot1[2] = 0;
+ return quot1;
+ }
+
+ while (1) {
+ umr = port->uartclk / (baud * div);
+ if (umr > 32) {
+ div++;
+ continue;
+ }
+ if (umr < 4) {
+ break;
+ }
+ for (i = 0; i < 12; i++) {
+ a[i] = umr;
+ b[i] = 0;
+ sum = 0;
+ for (j = 0; j <= i; j++) {
+ sum += a[j];
+ }
+
+ /* the precision could be 1/2^(36) due to the value of t0 */
+ t0 = 0x1000000000LL;
+ t1 = (i + 1) * t0;
+ t2 = (sum * div) * t0;
+ t3 = div * t0;
+ do_div(t1, baud);
+ do_div(t2, port->uartclk);
+ do_div(t3, (2 * port->uartclk));
+ err = t1 - t2 - t3;
+
+ if (err > 0) {
+ a[i] += 1;
+ b[i] = 1;
+ }
+ }
+
+ uacr = 0;
+ for (i = 0; i < 12; i++) {
+ if (b[i] == 1) {
+ uacr |= 1 << i;
+ }
+ }
+
+ /* the best value of umr should be near 16, and the value of uacr should better be smaller */
+ if (abs(umr - 16) < abs(umr_best - 16) || (abs(umr - 16) == abs(umr_best - 16) && uacr_best > uacr)) {
+ div_best = div;
+ umr_best = umr;
+ uacr_best = uacr;
+ }
+ div++;
+ }
+
+ quot1[0] = div_best;
+ quot1[1] = umr_best;
+ quot1[2] = uacr_best;
+
+ return quot1;
+}
+#else
static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
{
unsigned int quot;
@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis
return quot;
}
+#endif
static void
serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
+ unsigned short *quot1;
+#endif
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -2275,7 +2360,12 @@ serial8250_set_termios(struct uart_port
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / 16 / 0xffff,
port->uartclk / 16);
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
+ quot1 = serial8250_get_divisor(port, baud);
+ quot = quot1[0]; /* not usefull, just let gcc happy */
+#else
quot = serial8250_get_divisor(port, baud);
+#endif
/*
* Oxford Semi 952 rev B workaround
@@ -2353,6 +2443,10 @@ serial8250_set_termios(struct uart_port
if (up->capabilities & UART_CAP_UUE)
up->ier |= UART_IER_UUE | UART_IER_RTOIE;
+#ifdef CONFIG_JZSOC
+ up->ier |= UART_IER_RTOIE; /* Set this flag, or very slow */
+#endif
+
serial_out(up, UART_IER, up->ier);
if (up->capabilities & UART_CAP_EFR) {
@@ -2387,7 +2481,15 @@ serial8250_set_termios(struct uart_port
serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
}
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
+#define UART_UMR 9
+#define UART_UACR 10
+ serial_dl_write(up, quot1[0]);
+ serial_outp(up, UART_UMR, quot1[1]);
+ serial_outp(up, UART_UACR, quot1[2]);
+#else
serial_dl_write(up, quot);
+#endif
/*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
|
