path: root/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch

From 27ff621cd9a5347efda4be502abbef13a99146ce Mon Sep 17 00:00:00 2001
From: Maarten ter Huurne <maarten@treewalker.org>
Date: Sun, 29 Aug 2010 08:11:00 +0200
Subject: [PATCH 11/21] MIPS: JZ4740: Added setting of PLL rate and main
 dividers.

This functionality makes a cpufreq driver possible.
Squashed version of the development done in the jz-2.6.39 branch.
---
 arch/mips/jz4740/clock.c |  230 ++++++++++++++++++++++++++++++++++++++++++++--
 arch/mips/jz4740/clock.h |    4 +
 2 files changed, 224 insertions(+), 10 deletions(-)

--- a/arch/mips/jz4740/clock.c
+++ b/arch/mips/jz4740/clock.c
@@ -1,5 +1,8 @@
 /*
+ *  Copyright (c) 2006-2007, Ingenic Semiconductor Inc.
  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Copyright (c) 2010, Ulrich Hecht <ulrich.hecht@gmail.com>
+ *  Copyright (c) 2010, Maarten ter Huurne <maarten@treewalker.org>
  *  JZ4740 SoC clock support
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -41,16 +44,20 @@
 #define JZ_CLOCK_CTRL_I2S_SRC_PLL	BIT(31)
 #define JZ_CLOCK_CTRL_KO_ENABLE		BIT(30)
 #define JZ_CLOCK_CTRL_UDC_SRC_PLL	BIT(29)
-#define JZ_CLOCK_CTRL_UDIV_MASK		0x1f800000
 #define JZ_CLOCK_CTRL_CHANGE_ENABLE	BIT(22)
 #define JZ_CLOCK_CTRL_PLL_HALF		BIT(21)
-#define JZ_CLOCK_CTRL_LDIV_MASK		0x001f0000
 #define JZ_CLOCK_CTRL_UDIV_OFFSET	23
 #define JZ_CLOCK_CTRL_LDIV_OFFSET	16
 #define JZ_CLOCK_CTRL_MDIV_OFFSET	12
 #define JZ_CLOCK_CTRL_PDIV_OFFSET	 8
 #define JZ_CLOCK_CTRL_HDIV_OFFSET	 4
 #define JZ_CLOCK_CTRL_CDIV_OFFSET	 0
+#define JZ_CLOCK_CTRL_UDIV_MASK		(0x3f << JZ_CLOCK_CTRL_UDIV_OFFSET)
+#define JZ_CLOCK_CTRL_LDIV_MASK		(0x1f << JZ_CLOCK_CTRL_LDIV_OFFSET)
+#define JZ_CLOCK_CTRL_MDIV_MASK		(0x0f << JZ_CLOCK_CTRL_MDIV_OFFSET)
+#define JZ_CLOCK_CTRL_PDIV_MASK		(0x0f << JZ_CLOCK_CTRL_PDIV_OFFSET)
+#define JZ_CLOCK_CTRL_HDIV_MASK		(0x0f << JZ_CLOCK_CTRL_HDIV_OFFSET)
+#define JZ_CLOCK_CTRL_CDIV_MASK		(0x0f << JZ_CLOCK_CTRL_CDIV_OFFSET)
 
 #define JZ_CLOCK_GATE_UART0	BIT(0)
 #define JZ_CLOCK_GATE_TCU	BIT(1)
@@ -90,6 +97,7 @@
 #define JZ_CLOCK_PLL_M_OFFSET		23
 #define JZ_CLOCK_PLL_N_OFFSET		18
 #define JZ_CLOCK_PLL_OD_OFFSET		16
+#define JZ_CLOCK_PLL_STABILIZE_OFFSET	0
 
 #define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
 #define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
@@ -97,10 +105,15 @@
 #define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
 #define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
 
+#define JZ_REG_EMC_RTCNT	0x88
+#define JZ_REG_EMC_RTCOR	0x8C
+
 static void __iomem *jz_clock_base;
 static spinlock_t jz_clock_lock;
 static LIST_HEAD(jz_clocks);
 
+static void __iomem *jz_emc_base;
+
 struct main_clk {
 	struct clk clk;
 	uint32_t div_offset;
@@ -204,25 +217,88 @@ static int jz_clk_ko_is_enabled(struct c
 	return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
 }
 
+static struct static_clk jz_clk_ext;
+
+static unsigned long jz_clk_pll_calc_rate(
+	unsigned int in_div, unsigned int feedback, unsigned int out_div)
+{
+	return ((jz_clk_ext.rate / in_div) * feedback) / out_div;
+}
+
+static void jz_clk_pll_calc_dividers(unsigned long rate,
+	unsigned int *in_div, unsigned int *feedback, unsigned int *out_div)
+{
+	unsigned int target;
+
+	/* The frequency after the input divider must be between 1 and 15 MHz.
+	   The highest divider yields the best resolution. */
+	*in_div = jz_clk_ext.rate / 1000000;
+	if (*in_div >= 34)
+		*in_div = 33;
+
+	/* The frequency before the output divider must be between 100 and
+	   500 MHz. The lowest target rate is more energy efficient. */
+	if (rate < 25000000) {
+		*out_div = 4;
+		target = 25000000 * 4;
+	} else if (rate <= 50000000) {
+		*out_div = 4;
+		target = rate * 4;
+	} else if (rate <= 100000000) {
+		*out_div = 2;
+		target = rate * 2;
+	} else if (rate <= 500000000) {
+		*out_div = 1;
+		target = rate;
+	} else {
+		*out_div = 1;
+		target = 500000000;
+	}
+
+	/* Compute the feedback divider.
+	   Since the divided input is at least 1 MHz and the target frequency
+	   at most 500 MHz, the feedback will be at most 500 and will therefore
+	   always fit in the 9-bit register.
+	   Similarly, the divided input is at most 15 MHz and the target
+	   frequency at least 100 MHz, so the feedback will be at least 6
+	   where the minimum supported value is 2. */
+	*feedback = ((target / 1000) * *in_div) / (jz_clk_ext.rate / 1000);
+}
+
+static unsigned long jz_clk_pll_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int in_div, feedback, out_div;
+	/* The PLL frequency must be a multiple of 24 MHz, since the LCD pixel
+	 * clock must be exactly 12 MHz for the TV-out to work.
+	 * TODO: A multiple of 12 MHz for the PLL would work if the PLL would
+	 *       not be divided by 2 before being passed to the set of derived
+	 *       clocks that includes the LCD pixel clock.
+	 * TODO: Systemwide decisions like this should be made by the board
+	 *       support code, so add some kind of hook for that.
+	 */
+	unsigned long rate24 = (rate / 24000000) * 24000000;
+
+	jz_clk_pll_calc_dividers(rate24, &in_div, &feedback, &out_div);
+	return jz_clk_pll_calc_rate(in_div, feedback, out_div);
+}
+
 static const int pllno[] = {1, 2, 2, 4};
 
 static unsigned long jz_clk_pll_get_rate(struct clk *clk)
 {
 	uint32_t val;
-	int m;
-	int n;
-	int od;
+	unsigned int in_div, feedback, out_div;
 
 	val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
 
 	if (val & JZ_CLOCK_PLL_BYPASS)
 		return clk_get_rate(clk->parent);
 
-	m = ((val >> 23) & 0x1ff) + 2;
-	n = ((val >> 18) & 0x1f) + 2;
-	od = (val >> 16) & 0x3;
+	feedback = ((val >> 23) & 0x1ff) + 2;
+	in_div = ((val >> 18) & 0x1f) + 2;
+	out_div = pllno[(val >> 16) & 0x3];
 
-	return ((clk_get_rate(clk->parent) / n) * m) / pllno[od];
+	return jz_clk_pll_calc_rate(in_div, feedback, out_div);
 }
 
 static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
@@ -235,7 +311,77 @@ static unsigned long jz_clk_pll_half_get
 	return jz_clk_pll_get_rate(clk->parent) >> 1;
 }
 
-static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+#define SDRAM_TREF 15625   /* Refresh period: 4096 refresh cycles/64ms */
+
+static void sdram_set_pll(unsigned int pllin)
+{
+	unsigned int ns, sdramclock;
+
+	ns = 1000000000 / pllin;
+	sdramclock = (SDRAM_TREF / ns) / 64 + 1;
+	if (sdramclock > 0xff) sdramclock = 0xff;
+	/* Set refresh registers */
+	writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCOR);
+	writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCNT);
+}
+
+static int jz_clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int ctrl, plcr1;
+	unsigned int feedback, in_div, out_div, pllout, pllout2;
+
+	jz_clk_pll_calc_dividers(rate, &in_div, &feedback, &out_div);
+
+	ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
+	pllout = jz_clk_pll_calc_rate(in_div, feedback, out_div);
+	pllout2 = (ctrl & JZ_CLOCK_CTRL_PLL_HALF) ? pllout : (pllout / 2);
+
+	/* Init UHC clock */
+	writel(pllout2 / 48000000 - 1, jz_clock_base + JZ_REG_CLOCK_UHC);
+
+	plcr1 = ((feedback - 2) << JZ_CLOCK_PLL_M_OFFSET) |
+		((in_div - 2) << JZ_CLOCK_PLL_N_OFFSET) |
+		((out_div - 1) << JZ_CLOCK_PLL_OD_OFFSET) |
+		(0x20 << JZ_CLOCK_PLL_STABILIZE_OFFSET) |
+		JZ_CLOCK_PLL_ENABLED;
+
+	sdram_set_pll(pllout);
+
+	/* LCD pixclock */
+	writel(pllout2 / 12000000 - 1, jz_clock_base + JZ_REG_CLOCK_LCD);
+
+	/* configure PLL */
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".align 5\n"
+		"sw %1,0(%0)\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		".set reorder\n\t"
+		:
+		: "r" (jz_clock_base + JZ_REG_CLOCK_PLL), "r" (plcr1));
+
+	/* MtH: For some reason the MSC will have problems if this flag is not
+	        restored, even though the MSC is supposedly the only divider
+	        that is not affected by this flag. */
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_CHANGE_ENABLE);
+
+	return 0;
+}
+
+static const unsigned int jz_clk_main_divs[] = {
+	1, 2, 3, 4, 6, 8, 12, 16, 24, 32
+};
+static const unsigned int jz_clk_main_divs_inv[] = {
+	-1,  0,  1,  2,  3, -1,  4, -1,  5, -1, -1, -1,  6, -1, -1, -1,
+	 7, -1, -1, -1, -1, -1, -1, -1,  8, -1, -1, -1, -1, -1, -1, -1,
+	 9
+};
 
 static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
 {
@@ -290,6 +436,64 @@ static int jz_clk_main_set_rate(struct c
 	return 0;
 }
 
+static struct main_clk jz_clk_cpu;
+
+int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
+			  unsigned int mdiv, unsigned int pdiv)
+{
+	unsigned int cdiv_enc, hdiv_enc, mdiv_enc, pdiv_enc;
+	unsigned int ctrl;
+	unsigned int tmp, wait;
+
+	if (cdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
+	    hdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
+	    mdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
+	    pdiv >= ARRAY_SIZE(jz_clk_main_divs_inv))
+		return -EINVAL;
+	cdiv_enc = jz_clk_main_divs_inv[cdiv];
+	hdiv_enc = jz_clk_main_divs_inv[hdiv];
+	mdiv_enc = jz_clk_main_divs_inv[mdiv];
+	pdiv_enc = jz_clk_main_divs_inv[pdiv];
+	if (cdiv_enc == (unsigned int)-1 ||
+	    hdiv_enc == (unsigned int)-1 ||
+	    mdiv_enc == (unsigned int)-1 ||
+	    pdiv_enc == (unsigned int)-1)
+		return -EINVAL;
+
+	ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
+	ctrl &= ~(JZ_CLOCK_CTRL_CHANGE_ENABLE |
+		  JZ_CLOCK_CTRL_CDIV_MASK | JZ_CLOCK_CTRL_HDIV_MASK |
+		  JZ_CLOCK_CTRL_MDIV_MASK | JZ_CLOCK_CTRL_PDIV_MASK);
+	if (immediate) ctrl |= JZ_CLOCK_CTRL_CHANGE_ENABLE;
+	ctrl |= (cdiv_enc << JZ_CLOCK_CTRL_CDIV_OFFSET) |
+		(hdiv_enc << JZ_CLOCK_CTRL_HDIV_OFFSET) |
+		(mdiv_enc << JZ_CLOCK_CTRL_MDIV_OFFSET) |
+		(pdiv_enc << JZ_CLOCK_CTRL_PDIV_OFFSET);
+
+	/* set dividers */
+	/* delay loops lifted from the old Ingenic cpufreq driver */
+	wait = ((clk_get_rate(&jz_clk_cpu.clk) / 1000000) * 500) / 1000;
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".align 5\n"
+		"sw %2,0(%1)\n\t"
+		"li %0,0\n\t"
+		"1:\n\t"
+		"bne %0,%3,1b\n\t"
+		"addi %0, 1\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		".set reorder\n\t"
+		: "=r" (tmp)
+		: "r" (jz_clock_base + JZ_REG_CLOCK_CTRL), "r" (ctrl),
+		  "r" (wait));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_main_set_dividers);
+
 static struct clk_ops jz_clk_static_ops = {
 	.get_rate = jz_clk_static_get_rate,
 	.enable = jz_clk_enable_gating,
@@ -307,6 +511,8 @@ static struct static_clk jz_clk_ext = {
 
 static struct clk_ops jz_clk_pll_ops = {
 	.get_rate = jz_clk_pll_get_rate,
+	.set_rate = jz_clk_pll_set_rate,
+	.round_rate = jz_clk_pll_round_rate,
 };
 
 static struct clk jz_clk_pll = {
@@ -897,6 +1103,10 @@ static int jz4740_clock_init(void)
 	if (!jz_clock_base)
 		return -EBUSY;
 
+	jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
+	if (!jz_emc_base)
+		return -EBUSY;
+
 	spin_lock_init(&jz_clock_lock);
 
 	jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
--- a/arch/mips/jz4740/clock.h
+++ b/arch/mips/jz4740/clock.h
@@ -17,6 +17,7 @@
 #define __MIPS_JZ4740_CLOCK_H__
 
 #include <linux/list.h>
+#include <linux/types.h>
 
 struct jz4740_clock_board_data {
 	unsigned long ext_rate;
@@ -63,6 +64,9 @@ struct clk {
 
 int clk_is_enabled(struct clk *clk);
 
+int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
+			  unsigned int mdiv, unsigned int pdiv);
+
 #ifdef CONFIG_DEBUG_FS
 void jz4740_clock_debugfs_init(void);
 void jz4740_clock_debugfs_add_clk(struct clk *clk);