update to 2.6.22-rc6

SVN-Revision: 7758

17 files changed, 323 insertions, 176 deletions

diff --git a/target/linux/adm5120-2.6/Makefile b/target/linux/adm5120-2.6/Makefile
index 3eeef4a..c748c75 100644
--- a/target/linux/adm5120-2.6/Makefile
+++ b/target/linux/adm5120-2.6/Makefile
@@ -1,4 +1,4 @@
-# 
+#
 # Copyright (C) 2006 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -11,7 +11,7 @@ BOARD:=adm5120
 BOARDNAME:=ADM5120 (Little Endian)
 FEATURES:=squashfs jffs2 pci usb
 
-LINUX_VERSION:=2.6.21.5
+LINUX_VERSION:=2.6.22-rc6
 
 define Target/Description
 	Build firmware images for Infineon/ADMtek ADM5120 based boards
diff --git a/target/linux/adm5120-2.6/config/default b/target/linux/adm5120-2.6/config/default
index 5cd35c2..f223304 100644
--- a/target/linux/adm5120-2.6/config/default
+++ b/target/linux/adm5120-2.6/config/default
@@ -5,6 +5,8 @@ CONFIG_ADM5120_HARDWARE_SWAB=y
 CONFIG_ADM5120_NR_UARTS=2
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ATM_DRIVERS is not set
 CONFIG_BASE_SMALL=0
 CONFIG_BAYCOM_SER_FDX=m
 CONFIG_BAYCOM_SER_HDX=m
@@ -46,6 +48,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_VR41XX is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_DDB5477 is not set
+CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
@@ -60,6 +63,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HID=m
@@ -100,6 +104,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_MACH_VR41XX is not set
@@ -109,36 +114,20 @@ CONFIG_MIPS=y
 CONFIG_MIPS_ADM5120=y
 CONFIG_MIPS_ADM5120_ENET=y
 # CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_EV64120 is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_MTX1 is not set
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MIPS_XXS1500 is not set
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_ADM5120=y
@@ -179,10 +168,11 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_RB100=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_PCI is not set
@@ -194,6 +184,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_NETDEV_1000 is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_PCI is not set
 # CONFIG_NET_PKTGEN is not set
@@ -214,6 +205,7 @@ CONFIG_PCI_ADM5120=y
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_ADM5120=y
 CONFIG_SERIO=y
@@ -260,11 +252,7 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_GTCO is not set
-# CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_MCS7830 is not set
@@ -273,22 +261,12 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OV511 is not set
 # CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_SE401 is not set
 # CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
 # CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_ZC0301 is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_VIDEO_CPIA is not set
-CONFIG_VIDEO_CPIA2=m
-# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_V4L1=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_YAFFS_9BYTE_TAGS=y
@@ -302,3 +280,4 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_YAFFS_YAFFS1=y
 CONFIG_YAFFS_YAFFS2=y
 # CONFIG_ZD1211RW is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
index 9326077..e67064d 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
@@ -91,7 +91,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	irq = -1;
 	if (slot < 1 || slot > 3) {
-		printk("PCI: slot number %u is not supported\n", slot);
+		printk(KERN_ALERT "PCI: slot number %u is not supported\n",
+			slot);
 		goto out;
 	}
 
@@ -124,8 +125,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	case MACH_ADM5120_WPP54AG:
 	case MACH_ADM5120_WPP54G:
 	default:
-		printk("PCI: irq map is unknown for %s, using defaults.\n",
-			adm5120_board_name());
+		printk(KERN_ALERT "PCI: irq map is unknown for %s, using "
+			"defaults.\n",	adm5120_board_name());
 		break;
 	}
 
@@ -138,7 +139,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	}
 
 	if (irq < 0) {
-		printk(KERN_INFO "PCI: no irq found for %s pin:%u\n",
+		printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
 			pci_name(dev), pin);
 	} else {
 		printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
index c1b2688..da601b9 100644
--- a/target/linux/adm5120-2.6/patches/001-adm5120.patch
+++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch
@@ -1,11 +1,11 @@
-Index: linux-2.6.21.1/arch/mips/Kconfig
+Index: linux-2.6.22-rc6/arch/mips/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/arch/mips/Kconfig
-+++ linux-2.6.21.1/arch/mips/Kconfig
-@@ -16,6 +16,17 @@ choice
+--- linux-2.6.22-rc6.orig/arch/mips/Kconfig
++++ linux-2.6.22-rc6/arch/mips/Kconfig
+@@ -15,6 +15,17 @@ choice
  	prompt "System type"
  	default SGI_IP22
-
+ 
 +config MIPS_ADM5120
 +	bool "Support for ADM5120 SoC"
 +	select SYS_HAS_CPU_MIPS32_R1
@@ -17,24 +17,24 @@ Index: linux-2.6.21.1/arch/mips/Kconfig
 +	select SYS_SUPPORTS_32BIT_KERNEL
 +	select GENERIC_GPIO
 +
- config MIPS_MTX1
- 	bool "4G Systems MTX-1 board"
- 	select DMA_NONCOHERENT
-@@ -766,6 +775,7 @@
-
+ config MACH_ALCHEMY
+ 	bool "Alchemy processor based machines"
+ 
+@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
+ 
  endchoice
-
+ 
 +source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/au1000/Kconfig"
  source "arch/mips/ddb5xxx/Kconfig"
  source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
-Index: linux-2.6.21.1/arch/mips/Makefile
+Index: linux-2.6.22-rc6/arch/mips/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/arch/mips/Makefile
-+++ linux-2.6.21.1/arch/mips/Makefile
+--- linux-2.6.22-rc6.orig/arch/mips/Makefile
++++ linux-2.6.22-rc6/arch/mips/Makefile
 @@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
-
+ 
  #
 +# ADMtek 5120
 +#
@@ -47,18 +47,18 @@ Index: linux-2.6.21.1/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
+Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
 ===================================================================
---- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.21.1/include/asm-mips/bootinfo.h
+--- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
 @@ -213,6 +213,57 @@
  #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
  #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
-
+ 
 +/*
 + * Valid machtype for group ADMtek ADM5120
 + */
-+#define MACH_GROUP_ADM5120	23
++#define MACH_GROUP_ADM5120	26
 +#define MACH_ADM5120_UNKNOWN	0	/* Unknown board */
 +#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
 +#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
@@ -107,5 +107,5 @@ Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
 +#define MACH_ADM5120_BR6104K	47	/* Edimax BR-6104K */
 +
  #define CL_SIZE			COMMAND_LINE_SIZE
-
+ 
  const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
index c6237c6..355c126 100644
--- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
+++ b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
+Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig
-@@ -605,5 +605,10 @@ config MTD_PLATRAM
+--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,10 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
  
@@ -13,11 +13,11 @@ Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
 +
  endmenu
  
-Index: linux-2.6.21.1/drivers/mtd/maps/Makefile
+Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.21.1/drivers/mtd/maps/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
+--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
index cbd28b1..9dde782 100644
--- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
+++ b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.21.1/drivers/net/Kconfig
+Index: linux-2.6.22-rc6/drivers/net/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/net/Kconfig
-+++ linux-2.6.21.1/drivers/net/Kconfig
+--- linux-2.6.22-rc6.orig/drivers/net/Kconfig
++++ linux-2.6.22-rc6/drivers/net/Kconfig
 @@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
@@ -13,10 +13,10 @@ Index: linux-2.6.21.1/drivers/net/Kconfig
  config NET_SB1250_MAC
  	tristate "SB1250 Ethernet support"
  	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.21.1/drivers/net/Makefile
+Index: linux-2.6.22-rc6/drivers/net/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/net/Makefile
-+++ linux-2.6.21.1/drivers/net/Makefile
+--- linux-2.6.22-rc6.orig/drivers/net/Makefile
++++ linux-2.6.22-rc6/drivers/net/Makefile
 @@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
index 8a6d020..eb78e03 100644
--- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
+++ b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.21.1/drivers/serial/Makefile
+Index: linux-2.6.22-rc6/drivers/serial/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/serial/Makefile
-+++ linux-2.6.21.1/drivers/serial/Makefile
+--- linux-2.6.22-rc6.orig/drivers/serial/Makefile
++++ linux-2.6.22-rc6/drivers/serial/Makefile
 @@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
  obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
  obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
@@ -10,25 +10,25 @@ Index: linux-2.6.21.1/drivers/serial/Makefile
  obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
  obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
  obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.21.1/include/linux/serial_core.h
+Index: linux-2.6.22-rc6/include/linux/serial_core.h
 ===================================================================
---- linux-2.6.21.1.orig/include/linux/serial_core.h
-+++ linux-2.6.21.1/include/linux/serial_core.h
-@@ -135,6 +135,9 @@
- /* Xilinx uartlite */
- #define PORT_UARTLITE	74
+--- linux-2.6.22-rc6.orig/include/linux/serial_core.h
++++ linux-2.6.22-rc6/include/linux/serial_core.h
+@@ -143,6 +143,9 @@
+ #define PORT_KS8695	76
+ 
  
 +/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120	68
++#define PORT_ADM5120	77
 +
  #ifdef __KERNEL__
  
  #include <linux/compiler.h>
-Index: linux-2.6.21.1/drivers/serial/Kconfig
+Index: linux-2.6.22-rc6/drivers/serial/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/serial/Kconfig
-+++ linux-2.6.21.1/drivers/serial/Kconfig
-@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00
+--- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
++++ linux-2.6.22-rc6/drivers/serial/Kconfig
+@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
  
  comment "Non-8250 serial port support"
  
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
index f48b0f9..c862f90 100644
--- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
+++ b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
@@ -1,20 +1,191 @@
-Index: linux-2.6.21.1/drivers/usb/core/hub.c
+Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
 ===================================================================
---- linux-2.6.21.1.orig/drivers/usb/core/hub.c
-+++ linux-2.6.21.1/drivers/usb/core/hub.c
-@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru
+--- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
++++ linux-2.6.22-rc6/drivers/usb/core/hub.c
+@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
+ 			: (USB_ENDPOINT_XFER_BULK << 11);
+ 	if (usb_pipein (pipe))
+ 		clear->devinfo |= 1 << 15;
+-	
++
+ 	/* tell keventd to clear state for this TT */
+ 	spin_lock_irqsave (&tt->lock, flags);
+ 	list_add_tail (&clear->clear_list, &tt->clear_list);
+@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
+ 			"%s failed (err = %d)\n", __FUNCTION__, ret);
+ 	else {
+ 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
+-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
++		*change = le16_to_cpu(hub->status->hub.wHubChange);
+ 		ret = 0;
+ 	}
+ 	mutex_unlock(&hub->status_mutex);
+@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
+ 			ret = -EIO;
+ 	} else {
+ 		*status = le16_to_cpu(hub->status->port.wPortStatus);
+-		*change = le16_to_cpu(hub->status->port.wPortChange); 
++		*change = le16_to_cpu(hub->status->port.wPortChange);
+ 		ret = 0;
+ 	}
+ 	mutex_unlock(&hub->status_mutex);
+@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
+  * Between connect detection and reset signaling there must be a delay
+  * of 100ms at least for debounce and power-settling.  The corresponding
+  * timer shall restart whenever the downstream port detects a disconnect.
+- * 
++ *
+  * Apparently there are some bluetooth and irda-dongles and a number of
+  * low-speed devices for which this debounce period may last over a second.
+  * Not covered by the spec - but easy to deal with.
+@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
+ 		goto fail;
+ 	}
+ 	oldspeed = udev->speed;
+-  
++
+ 	/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
+ 	 * it's fixed size except for full speed devices.
+ 	 * For Wireless USB devices, ep0 max packet is always 512 (tho
+@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
+ 	default:
+ 		goto fail;
+ 	}
+- 
++
+ 	type = "";
+ 	switch (udev->speed) {
+ 	case USB_SPEED_LOW:	speed = "low";	break;
+@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
+ 		udev->tt = &hub->tt;
+ 		udev->ttport = port1;
+ 	}
+- 
++
+ 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
+ 	 * Because device hardware and firmware is sometimes buggy in
+ 	 * this area, and this is how Linux has done it for ages.
+@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
  					USB_DT_DEVICE << 8, 0,
  					buf, GET_DESCRIPTOR_BUFSIZE,
- 					(i ? USB_CTRL_GET_TIMEOUT : 1000));
+ 					USB_CTRL_GET_TIMEOUT);
 +printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
 +buf->bDescriptorType, USB_DT_DEVICE);
  				switch (buf->bMaxPacketSize0) {
  				case 8: case 16: case 32: case 64: case 255:
  					if (buf->bDescriptorType ==
-Index: linux-2.6.21.1/drivers/usb/host/Kconfig
+@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
+ 				udev->devnum, retval);
+ 			goto fail;
+ 		}
+- 
++
+ 		/* cope with hardware quirkiness:
+ 		 *  - let SET_ADDRESS settle, some device hardware wants it
+ 		 *  - read ep0 maxpacket even for high and low speed,
+@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
+ 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+ 		ep0_reinit(udev);
+ 	}
+-  
++
+ 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
+ 	if (retval < (signed)sizeof(udev->descriptor)) {
+ 		dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
+@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
+ 	struct device *hub_dev = hub->intfdev;
+ 	u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+ 	int status, i;
+- 
++
+ 	dev_dbg (hub_dev,
+ 		"port %d, status %04x, change %04x, %s\n",
+ 		port1, portstatus, portchange, portspeed (portstatus));
+@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
+ 		set_port_led(hub, port1, HUB_LED_AUTO);
+ 		hub->indicator[port1-1] = INDICATOR_AUTO;
+ 	}
+- 
++
+ 	/* Disconnect any existing devices under this port */
+ 	if (hdev->children[port1-1])
+ 		usb_disconnect(&hdev->children[port1-1]);
+@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
+ 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
+ 				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+ 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+- 
++
+ 		if (portstatus & USB_PORT_STAT_ENABLE)
+   			goto done;
+ 		return;
+@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
+ 				goto loop_disable;
+ 			}
+ 		}
+- 
++
+ 		/* check for devices running slower than they could */
+ 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
+ 				&& udev->speed == USB_SPEED_FULL
+@@ -2587,7 +2589,7 @@ loop:
+ 		if (status == -ENOTCONN)
+ 			break;
+ 	}
+- 
++
+ done:
+ 	hub_port_disable(hub, port1, 1);
+ }
+@@ -2720,7 +2722,7 @@ static void hub_events(void)
+ 				 * EM interference sometimes causes badly
+ 				 * shielded USB devices to be shutdown by
+ 				 * the hub, this hack enables them again.
+-				 * Works at least with mouse driver. 
++				 * Works at least with mouse driver.
+ 				 */
+ 				if (!(portstatus & USB_PORT_STAT_ENABLE)
+ 				    && !connect_change
+@@ -2750,7 +2752,7 @@ static void hub_events(void)
+ 					"resume on port %d, status %d\n",
+ 					i, ret);
+ 			}
+-			
++
+ 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+ 				dev_err (hub_dev,
+ 					"over-current change on port %d\n",
+@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
+ 
+ 	if (ret < 0)
+ 		goto re_enumerate;
+- 
++
+ 	/* Device might have changed firmware (DFU or similar) */
+ 	if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
+ 			|| config_descriptors_changed (udev)) {
+@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
+ 		udev->descriptor = descriptor;	/* for disconnect() calls */
+ 		goto re_enumerate;
+   	}
+-  
++
+ 	if (!udev->actconfig)
+ 		goto done;
+ 
+@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
+ 
+ done:
+ 	return 0;
+- 
++
+ re_enumerate:
+ 	hub_port_logical_disconnect(parent_hub, port1);
+ 	return -ENODEV;
+Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.21.1/drivers/usb/host/Kconfig
+--- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
 @@ -224,3 +224,6 @@ config USB_SL811_CS
  	  To compile this driver as a module, choose M here: the
  	  module will be called "sl811_cs".
@@ -22,35 +193,38 @@ Index: linux-2.6.21.1/drivers/usb/host/Kconfig
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support"
 +	depends on USB && MIPS_ADM5120
-Index: linux-2.6.21.1/drivers/usb/host/Makefile
+Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/usb/host/Makefile
-+++ linux-2.6.21.1/drivers/usb/host/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd
- obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
- obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
+--- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
++++ linux-2.6.22-rc6/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@ endif
+ 
+ obj-$(CONFIG_PCI)		+= pci-quirks.o
+ 
 +obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
-Index: linux-2.6.21.1/drivers/usb/Kconfig
+ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
+ obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
+Index: linux-2.6.22-rc6/drivers/usb/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/usb/Kconfig
-+++ linux-2.6.21.1/drivers/usb/Kconfig
-@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig"
+--- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
++++ linux-2.6.22-rc6/drivers/usb/Kconfig
+@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
  
- source "drivers/usb/net/Kconfig"
+ source "drivers/usb/image/Kconfig"
  
 -source "drivers/usb/mon/Kconfig"
 -
  comment "USB port drivers"
  	depends on USB
  
-Index: linux-2.6.21.1/drivers/usb/Makefile
+Index: linux-2.6.22-rc6/drivers/usb/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/usb/Makefile
-+++ linux-2.6.21.1/drivers/usb/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
+--- linux-2.6.22-rc6.orig/drivers/usb/Makefile
++++ linux-2.6.22-rc6/drivers/usb/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+ obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
- obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
  obj-$(CONFIG_USB_OHCI_AT91)	+= host/
 +obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
  
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
index ac654a0..91ca638 100644
--- a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
+++ b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.21.1/drivers/leds/Kconfig
+Index: linux-2.6.22-rc6/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Kconfig
-+++ linux-2.6.21.1/drivers/leds/Kconfig
-@@ -19,6 +19,27 @@ config LEDS_CLASS
+--- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
++++ linux-2.6.22-rc6/drivers/leds/Kconfig
+@@ -20,6 +20,27 @@ config LEDS_CLASS
  
  comment "LED drivers"
  
@@ -30,10 +30,10 @@ Index: linux-2.6.21.1/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.21.1/drivers/leds/Makefile
+Index: linux-2.6.22-rc6/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Makefile
-+++ linux-2.6.21.1/drivers/leds/Makefile
+--- linux-2.6.22-rc6.orig/drivers/leds/Makefile
++++ linux-2.6.22-rc6/drivers/leds/Makefile
 @@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
index 1098a24..18839cf 100644
--- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
+++ b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
@@ -1,17 +1,17 @@
-Index: linux-2.6.21.1/arch/mips/pci/Makefile
+Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/arch/mips/pci/Makefile
-+++ linux-2.6.21.1/arch/mips/pci/Makefile
-@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
+--- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
++++ linux-2.6.22-rc6/arch/mips/pci/Makefile
+@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.21.1/include/linux/pci_ids.h
+Index: linux-2.6.22-rc6/include/linux/pci_ids.h
 ===================================================================
---- linux-2.6.21.1.orig/include/linux/pci_ids.h
-+++ linux-2.6.21.1/include/linux/pci_ids.h
-@@ -1701,6 +1701,9 @@
+--- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
++++ linux-2.6.22-rc6/include/linux/pci_ids.h
+@@ -1712,6 +1712,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
index 6b0fe55..c0fd645 100644
--- a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
+++ b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
@@ -1,6 +1,8 @@
---- linux-2.6.19.2/include/asm-mips/byteorder.h	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h	2007-05-16 21:14:47.000000000 +0200
-@@ -58,6 +58,35 @@
+Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
++++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
+@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
  
  #endif /* CONFIG_CPU_MIPSR2 */
  
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
index 88b9045..2b4381c 100644
--- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
+++ b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.21.1/drivers/mtd/Kconfig
+Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/Kconfig
-@@ -157,6 +157,22 @@ config MTD_AFS_PARTS
+--- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/Kconfig
+@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
  
@@ -23,13 +23,13 @@ Index: linux-2.6.21.1/drivers/mtd/Kconfig
 +	  for your particular device. It won't happen automatically.
 +
  comment "User Modules And Translation Layers"
- 	depends on MTD
  
-Index: linux-2.6.21.1/drivers/mtd/Makefile
+ config MTD_CHAR
+Index: linux-2.6.22-rc6/drivers/mtd/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/Makefile
-+++ linux-2.6.21.1/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+--- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
diff --git a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
index 58b6dff..543cb94 100644
--- a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
+++ b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
+Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,17 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -66,11 +66,11 @@ Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.21.1/drivers/mtd/chips/Kconfig
+Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/chips/Kconfig
-@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD
+--- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
index d5edc23..47378e5 100644
--- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
+++ b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.21.1/arch/mips/kernel/head.S
+Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
 ===================================================================
---- linux-2.6.21.1.orig/arch/mips/kernel/head.S
-+++ linux-2.6.21.1/arch/mips/kernel/head.S
+--- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
++++ linux-2.6.22-rc6/arch/mips/kernel/head.S
 @@ -129,14 +129,19 @@
  #endif
  	.endm
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
index 8929a73..fb503c5 100644
--- a/target/linux/adm5120-2.6/patches/500-Nand.patch
+++ b/target/linux/adm5120-2.6/patches/500-Nand.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
+Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig
-@@ -75,6 +75,12 @@ config MTD_NAND_TS7250
+--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
  	help
  	  Support for NAND flash on Technologic Systems TS-7250 platform.
  
@@ -15,10 +15,10 @@ Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
  config MTD_NAND_IDS
  	tristate
  
-Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
+Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
 ===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.21.1/drivers/mtd/nand/Makefile
+--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
 @@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
  obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
  obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
diff --git a/target/linux/adm5120eb-2.6/Makefile b/target/linux/adm5120eb-2.6/Makefile
index 9b5c299..d7e408b 100644
--- a/target/linux/adm5120eb-2.6/Makefile
+++ b/target/linux/adm5120eb-2.6/Makefile
@@ -11,7 +11,7 @@ BOARD:=adm5120eb
 BOARDNAME:=ADM5120 (Big Endian)
 FEATURES:=squashfs pci usb
 
-LINUX_VERSION:=2.6.21.5
+LINUX_VERSION:=2.6.22-rc6
 
 define Target/Description
 	Build firmware images for Infineon/ADMTek ADM5120 based boards running in big-endian mode
diff --git a/target/linux/adm5120eb-2.6/config/default b/target/linux/adm5120eb-2.6/config/default
index d023d40..9c5a35b 100644
--- a/target/linux/adm5120eb-2.6/config/default
+++ b/target/linux/adm5120eb-2.6/config/default
@@ -5,6 +5,8 @@ CONFIG_ADM5120_HARDWARE_SWAB=y
 CONFIG_ADM5120_NR_UARTS=2
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ATM_DRIVERS is not set
 CONFIG_BASE_SMALL=0
 CONFIG_BAYCOM_SER_FDX=m
 CONFIG_BAYCOM_SER_HDX=m
@@ -46,6 +48,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_VR41XX is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_DDB5477 is not set
+CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
@@ -60,6 +63,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HID=m
@@ -100,6 +104,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_MACH_VR41XX is not set
@@ -109,36 +114,20 @@ CONFIG_MIPS=y
 CONFIG_MIPS_ADM5120=y
 CONFIG_MIPS_ADM5120_ENET=y
 # CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_EV64120 is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_MTX1 is not set
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MIPS_XXS1500 is not set
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_ADM5120 is not set
@@ -174,7 +163,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_PCI is not set
@@ -189,6 +177,7 @@ CONFIG_MTD_PHYSMAP_START=0x1fc00000
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
+CONFIG_NETDEV_1000=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_PCI is not set
 # CONFIG_NET_PKTGEN is not set
@@ -209,6 +198,7 @@ CONFIG_PCI_ADM5120=y
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_ADM5120=y
 CONFIG_SERIO=y
@@ -252,7 +242,6 @@ CONFIG_USB_ADM5120_HCD=y
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_GTCO is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_PRINTER is not set
@@ -263,5 +252,7 @@ CONFIG_USB_ADM5120_HCD=y
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_ZD1201 is not set
+# CONFIG_VGASTATE is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_ZD1211RW is not set
+CONFIG_ZONE_DMA_FLAG=0