kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.

SVN-Revision: 36473

14 files changed, 2802 insertions, 469 deletions

diff --git a/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch
index 1f3eea8..2d2f11b 100644
--- a/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch
+++ b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch
@@ -113,8 +113,8 @@
 +#endif /* BCM47XXSFLASH */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -529,6 +529,7 @@ struct bcma_sflash {
- 	u32 size;
+@@ -544,6 +544,7 @@ struct bcma_nflash {
+ 	bool boot;		/* This is the flash the SoC boots from */
  
  	struct mtd_info *mtd;
 +	void *priv;
diff --git a/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch
index 6c17fb9..1148a48 100644
--- a/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch
+++ b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch
@@ -296,7 +296,7 @@
  }
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -549,6 +549,15 @@ static int ssb_devices_register(struct s
+@@ -545,6 +545,15 @@ static int ssb_devices_register(struct s
  		dev_idx++;
  	}
  
@@ -314,7 +314,7 @@
  		err = platform_device_register(&ssb_pflash_dev);
 --- a/drivers/ssb/ssb_private.h
 +++ b/drivers/ssb/ssb_private.h
-@@ -220,6 +220,7 @@ extern u32 ssb_chipco_watchdog_timer_set
+@@ -231,6 +231,7 @@ extern u32 ssb_chipco_watchdog_timer_set
  /* driver_chipcommon_sflash.c */
  #ifdef CONFIG_SSB_SFLASH
  int ssb_sflash_init(struct ssb_chipcommon *cc);
diff --git a/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch
index 0bd23cc..bba2b69 100644
--- a/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch
+++ b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch
@@ -269,7 +269,7 @@
  
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
-@@ -520,19 +521,6 @@ struct bcma_pflash {
+@@ -523,19 +524,6 @@ struct bcma_pflash {
  	u32 window_size;
  };
  
@@ -289,7 +289,7 @@
  #ifdef CONFIG_BCMA_NFLASH
  struct mtd_info;
  
-@@ -566,7 +554,7 @@ struct bcma_drv_cc {
+@@ -570,7 +558,7 @@ struct bcma_drv_cc {
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  	struct bcma_pflash pflash;
  #ifdef CONFIG_BCMA_SFLASH
diff --git a/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch
index 04c378f..4606c23 100644
--- a/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch
+++ b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch
@@ -450,23 +450,3 @@
  			crystalfreq = simple_strtoul(buf, NULL, 0);
  #endif
  	}
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -98,14 +98,14 @@ static inline bool ssb_gige_must_flush_p
- }
- 
- #ifdef CONFIG_BCM47XX
--#include <asm/mach-bcm47xx/nvram.h>
-+#include <bcm47xx_nvram.h>
- /* Get the device MAC address */
- static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
- 	char buf[20];
--	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-+	if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
- 		return;
--	nvram_parse_macaddr(buf, macaddr);
-+	bcm47xx_nvram_parse_macaddr(buf, macaddr);
- }
- #else
- static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
diff --git a/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch b/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch
deleted file mode 100644
index 0a4dd62..0000000
--- a/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -26,6 +26,7 @@ struct ssb_sprom_core_pwr_info {
- 
- struct ssb_sprom {
- 	u8 revision;
-+	u8 country_code;	/* Country Code */
- 	u8 il0mac[6];		/* MAC address for 802.11b/g */
- 	u8 et0mac[6];		/* MAC address for Ethernet */
- 	u8 et1mac[6];		/* MAC address for 802.11a */
-@@ -36,7 +37,6 @@ struct ssb_sprom {
- 	u16 board_rev;		/* Board revision number from SPROM. */
- 	u16 board_num;		/* Board number from SPROM. */
- 	u16 board_type;		/* Board type from SPROM. */
--	u8 country_code;	/* Country Code */
- 	char alpha2[2];		/* Country Code as two chars like EU or US */
- 	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
- 	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
diff --git a/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch
index cdbae5f..fc868c0 100644
--- a/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch
+++ b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch
@@ -343,45 +343,3 @@
  #define PCI_DEVICE_ID_TIGON3_5751	0x1677
  #define PCI_DEVICE_ID_TIGON3_5715	0x1678
  #define PCI_DEVICE_ID_TIGON3_5715S	0x1679
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
- 	return 0;
- }
- 
--#ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
- /* Get the device MAC address */
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
--{
--	char buf[20];
--	if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
--		return;
--	bcm47xx_nvram_parse_macaddr(buf, macaddr);
--}
--#else
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
-+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+	if (!dev)
-+		return -ENODEV;
-+
-+	memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
-+	return 0;
- }
--#endif
- 
- extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
- 					  struct pci_dev *pdev);
-@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
- {
- 	return 0;
- }
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+	return -ENODEV;
-+}
- 
- #endif /* CONFIG_SSB_DRIVER_GIGE */
- #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch
index 1c31d4c..30f32f9 100644
--- a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch
+++ b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch
@@ -41,25 +41,6 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  create mode 100644 drivers/net/ethernet/broadcom/bgmac.c
  create mode 100644 drivers/net/ethernet/broadcom/bgmac.h
 
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -280,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
- }
- 
- /* query bus clock frequency for PMU-enabled chipcommon */
--static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
-+u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
- {
- 	struct bcma_bus *bus = cc->core->bus;
- 
-@@ -309,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
- 	}
- 	return BCMA_CC_PMU_HT_CLOCK;
- }
-+EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
- 
- /* query cpu clock frequency for PMU-enabled chipcommon */
- u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
 --- a/drivers/net/ethernet/broadcom/Kconfig
 +++ b/drivers/net/ethernet/broadcom/Kconfig
 @@ -121,4 +121,13 @@ config BNX2X
@@ -1967,12 +1948,3 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 +void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
 +
 +#endif /* _BGMAC_H */
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -626,4 +626,6 @@ extern void bcma_chipco_regctl_maskset(s
- 				       u32 offset, u32 mask, u32 set);
- extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
- 
-+extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
-+
- #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch
index 0dc2d5f..b56f1d5 100644
--- a/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch
+++ b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ssb/driver_pcicore.c
 +++ b/drivers/ssb/driver_pcicore.c
-@@ -376,7 +376,7 @@ static void ssb_pcicore_init_hostmode(st
+@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
  	set_io_port_base(ssb_pcicore_controller.io_map_base);
  	/* Give some time to the PCI controller to configure itself with the new
  	 * values. Not waiting at this point causes crashes of the machine. */
diff --git a/target/linux/generic/patches-3.8/020-ssb_update.patch b/target/linux/generic/patches-3.8/020-ssb_update.patch
index e4d6993..a1b4a1f 100644
--- a/target/linux/generic/patches-3.8/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.8/020-ssb_update.patch
@@ -22,6 +22,156 @@
  ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
  ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
  ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
+ 
+ 	if (cc->dev->id.revision >= 11)
+ 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+-	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++	ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+ 
+ 	if (cc->dev->id.revision >= 20) {
+ 		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 		return;
+ 	}
+ 
+-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+-		   (crystalfreq / 1000), (crystalfreq % 1000));
++	ssb_info("Programming PLL to %u.%03u MHz\n",
++		 crystalfreq / 1000, crystalfreq % 1000);
+ 
+ 	/* First turn the PLL off. */
+ 	switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 	}
+ 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++		ssb_emerg("Failed to turn the PLL off!\n");
+ 
+ 	/* Set PDIV in PLL control 0. */
+ 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ 		return;
+ 	}
+ 
+-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+-		   (crystalfreq / 1000), (crystalfreq % 1000));
++	ssb_info("Programming PLL to %u.%03u MHz\n",
++		 crystalfreq / 1000, crystalfreq % 1000);
+ 
+ 	/* First turn the PLL off. */
+ 	switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ 	}
+ 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++		ssb_emerg("Failed to turn the PLL off!\n");
+ 
+ 	/* Set p1div and p2div. */
+ 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	case 43222:
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PLL init unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PLL init unknown for device %04X\n",
++			bus->chip_id);
+ 	}
+ }
+ 
+@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ 		max_msk = 0xFFFFF;
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU resource config unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++			bus->chip_id);
+ 	}
+ 
+ 	if (updown_tab) {
+@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ 	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ 	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+ 
+-	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+-		    cc->pmu.rev, pmucap);
++	ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++		cc->pmu.rev, pmucap);
+ 
+ 	if (cc->pmu.rev == 1)
+ 		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
+ 	case 0x5354:
+ 		ssb_pmu_get_alp_clock_clk0(cc);
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU alp clock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ 		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ 		return 240000000;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU cpu clock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 	case 0x5354:
+ 		return 120000000;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU controlclock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct
+ 		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ 		break;
+ 	case 43222:
+-		/* TODO: BCM43222 requires updating PLLs too */
+-		return;
++		if (spuravoid == 1) {
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++		} else {
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++		}
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+ 			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
 --- /dev/null
 +++ b/drivers/ssb/driver_chipcommon_sflash.c
 @@ -0,0 +1,140 @@
@@ -253,7 +403,40 @@
  
  static inline u32 mips_read32(struct ssb_mipscore *mcore,
  			      u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ 	}
+-	ssb_dprintk(KERN_INFO PFX
+-		    "set_irq: core 0x%04x, irq %d => %d\n",
+-		    dev->id.coreid, oldirq+2, irq+2);
++	ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++		dev->id.coreid, oldirq+2, irq+2);
+ }
+ 
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+-	int i;
+ 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+-	ssb_dprintk(KERN_INFO PFX
+-		"core 0x%04x, irq :", dev->id.coreid);
+-	for (i = 0; i <= 6; i++) {
+-		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+-	}
+-	ssb_dprintk("\n");
++	ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++		dev->id.coreid,
++		irq_name[0], irq == 0 ? "*" : " ",
++		irq_name[1], irq == 1 ? "*" : " ",
++		irq_name[2], irq == 2 ? "*" : " ",
++		irq_name[3], irq == 3 ? "*" : " ",
++		irq_name[4], irq == 4 ? "*" : " ",
++		irq_name[5], irq == 5 ? "*" : " ",
++		irq_name[6], irq == 6 ? "*" : " ");
+ }
+ 
+ static void dump_irq(struct ssb_bus *bus)
+@@ -189,34 +210,43 @@ static void ssb_mips_serial_init(struct
  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
  {
  	struct ssb_bus *bus = mcore->dev->bus;
@@ -308,9 +491,142 @@
  }
  
  u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+@@ -257,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 	if (!mcore->dev)
+ 		return; /* We don't have a MIPS core */
+ 
+-	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++	ssb_dbg("Initializing MIPS core...\n");
+ 
+ 	bus = mcore->dev->bus;
+ 	hz = ssb_clockspeed(bus);
+@@ -305,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 			break;
+ 		}
+ 	}
+-	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++	ssb_dbg("after irq reconfiguration\n");
+ 	dump_irq(bus);
+ 
+ 	ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ 		return -ENODEV;
+ 	}
+ 
+-	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+-		   pci_name(d));
++	ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+ 
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ 		return;
+ 
+-	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++	ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+ 
+ 	/* Enable PCI bridge bus mastering and memory space */
+ 	pci_set_master(dev);
+ 	if (pcibios_enable_device(dev, ~0) < 0) {
+-		ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++		ssb_err("PCI: SSB bridge enable failed\n");
+ 		return;
+ 	}
+ 
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+ 
+ 	/* Make sure our latency is high enough to handle the devices behind us */
+ 	lat = 168;
+-	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+-		   pci_name(dev), lat);
++	ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++		 pci_name(dev), lat);
+ 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
+ 		return;
+ 	extpci_core = pc;
+ 
+-	ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++	ssb_dbg("PCIcore in host mode found\n");
+ 	/* Reset devices on the external PCI bus */
+ 	val = SSB_PCICORE_CTL_RST_OE;
+ 	val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
+ 	udelay(1); /* Assertion time demanded by the PCI standard */
+ 
+ 	if (pc->dev->bus->has_cardbus_slot) {
+-		ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++		ssb_dbg("CardBus slot detected\n");
+ 		pc->cardbusmode = 1;
+ 		/* GPIO 1 resets the bridge */
+ 		ssb_gpio_out(pc->dev->bus, 1, 1);
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
+ 					     bus->busnumber, &wdt,
+ 					     sizeof(wdt));
+ 	if (IS_ERR(pdev)) {
+-		ssb_dprintk(KERN_INFO PFX
+-			    "can not register watchdog device, err: %li\n",
+-			    PTR_ERR(pdev));
++		ssb_dbg("can not register watchdog device, err: %li\n",
++			PTR_ERR(pdev));
+ 		return PTR_ERR(pdev);
+ 	}
+ 
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -549,6 +549,14 @@ static int ssb_devices_register(struct s
+@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+ 
+ 		err = sdrv->probe(sdev, &sdev->id);
+ 		if (err) {
+-			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+-				   dev_name(sdev->dev));
++			ssb_err("Failed to thaw device %s\n",
++				dev_name(sdev->dev));
+ 			result = err;
+ 		}
+ 		ssb_device_put(sdev);
+@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
+ 
+ 	err = ssb_gpio_unregister(bus);
+ 	if (err == -EBUSY)
+-		ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
++		ssb_dbg("Some GPIOs are still in use\n");
+ 	else if (err)
+-		ssb_dprintk(KERN_ERR PFX
+-			    "Can not unregister GPIO driver: %i\n", err);
++		ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+ 
+ 	ssb_buses_lock();
+ 	ssb_devices_unregister(bus);
+@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
+ 
+ 		devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ 		if (!devwrap) {
+-			ssb_printk(KERN_ERR PFX
+-				   "Could not allocate device\n");
++			ssb_err("Could not allocate device\n");
+ 			err = -ENOMEM;
+ 			goto error;
+ 		}
+@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
+ 		sdev->dev = dev;
+ 		err = device_register(dev);
+ 		if (err) {
+-			ssb_printk(KERN_ERR PFX
+-				   "Could not register %s\n",
+-				   dev_name(dev));
++			ssb_err("Could not register %s\n", dev_name(dev));
+ 			/* Set dev to NULL to not unregister
+ 			 * dev on error unwinding. */
+ 			sdev->dev = NULL;
+@@ -549,6 +545,14 @@ static int ssb_devices_register(struct s
  		dev_idx++;
  	}
  
@@ -325,47 +641,194 @@
  	return 0;
  error:
  	/* Unwind the already registered devices. */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -217,6 +217,21 @@ extern u32 ssb_chipco_watchdog_timer_set
- 					     u32 ticks);
- extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+@@ -817,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+ 	ssb_mipscore_init(&bus->mipscore);
+ 	err = ssb_gpio_init(bus);
+ 	if (err == -ENOTSUPP)
+-		ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++		ssb_dbg("GPIO driver not activated\n");
+ 	else if (err)
+-		ssb_dprintk(KERN_ERR PFX
+-			   "Error registering GPIO driver: %i\n", err);
++		ssb_dbg("Error registering GPIO driver: %i\n", err);
+ 	err = ssb_fetch_invariants(bus, get_invariants);
+ 	if (err) {
+ 		ssb_bus_may_powerdown(bus);
+@@ -870,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
  
-+/* driver_chipcommon_sflash.c */
-+#ifdef CONFIG_SSB_SFLASH
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#else
-+static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+	pr_err("Serial flash not supported\n");
-+	return 0;
-+}
-+#endif /* CONFIG_SSB_SFLASH */
-+
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+extern struct platform_device ssb_pflash_dev;
-+#endif
-+
- #ifdef CONFIG_SSB_DRIVER_EXTIF
- extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
- extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
---- a/include/linux/ssb/ssb_driver_mips.h
-+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
- {
+ 	err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "PCI device %s\n", dev_name(&host_pci->dev));
++		ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++			 dev_name(&host_pci->dev));
+ 	} else {
+-		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+-			   " of SSB with error %d\n", err);
++		ssb_err("Failed to register PCI version of SSB with error %d\n",
++			err);
+ 	}
+ 
+ 	return err;
+@@ -895,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+ 
+ 	err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "PCMCIA device %s\n", pcmcia_dev->devname);
++		ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++			 pcmcia_dev->devname);
+ 	}
+ 
+ 	return err;
+@@ -917,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+ 
+ 	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "SDIO device %s\n", sdio_func_id(func));
++		ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++			 sdio_func_id(func));
+ 	}
+ 
+ 	return err;
+@@ -936,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+ 
+ 	err = ssb_bus_register(bus, get_invariants, baseaddr);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+-			   "address 0x%08lX\n", baseaddr);
++		ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++			 baseaddr);
+ 	}
+ 
+ 	return err;
+@@ -1331,7 +1334,7 @@ out:
+ #endif
+ 	return err;
+ error:
+-	ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++	ssb_err("Bus powerdown failed\n");
+ 	goto out;
  }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1354,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
  
-+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++	ssb_err("Bus powerup failed\n");
+ 	return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1462,15 +1465,13 @@ static int __init ssb_modinit(void)
+ 
+ 	err = b43_pci_ssb_bridge_init();
+ 	if (err) {
+-		ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+-			   "initialization failed\n");
++		ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+ 	err = ssb_gige_init();
+ 	if (err) {
+-		ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+-			   "driver initialization failed\n");
++		ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ 	}
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++	ssb_err("Failed to switch to core %u\n", coreidx);
+ 	return -ENODEV;
+ }
+ 
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ 	unsigned long flags;
+ 
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+-	ssb_printk(KERN_INFO PFX
+-		   "Switching to %s core, index %d\n",
+-		   ssb_core_name(dev->id.coreid),
+-		   dev->core_index);
++	ssb_info("Switching to %s core, index %d\n",
++		 ssb_core_name(dev->id.coreid),
++		 dev->core_index);
+ #endif
+ 
+ 	spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ 	return t[crc ^ data];
+ }
+ 
++static void sprom_get_mac(char *mac, const u16 *in)
 +{
-+	return 0;
++	int i;
++	for (i = 0; i < 3; i++) {
++		*mac++ = in[i] >> 8;
++		*mac++ = in[i];
++	}
 +}
 +
- #endif /* CONFIG_SSB_DRIVER_MIPS */
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ 	int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ 	u32 spromctl;
+ 	u16 size = bus->sprom_size;
  
- #endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+-	ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ 	if (err)
+ 		goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ 	if (err)
+ 		goto err_ctlreg;
+-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
++	ssb_notice("[ 0%%");
+ 	msleep(500);
+ 	for (i = 0; i < size; i++) {
+ 		if (i == size / 4)
+-			ssb_printk("25%%");
++			ssb_cont("25%%");
+ 		else if (i == size / 2)
+-			ssb_printk("50%%");
++			ssb_cont("50%%");
+ 		else if (i == (size * 3) / 4)
+-			ssb_printk("75%%");
++			ssb_cont("75%%");
+ 		else if (i % 2)
+-			ssb_printk(".");
++			ssb_cont(".");
+ 		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ 	if (err)
+ 		goto err_ctlreg;
+ 	msleep(500);
+-	ssb_printk("100%% ]\n");
+-	ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++	ssb_cont("100%% ]\n");
++	ssb_notice("SPROM written\n");
+ 
+ 	return 0;
+ err_ctlreg:
+-	ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++	ssb_err("Could not access SPROM control register.\n");
+ 	return err;
+ }
+ 
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
  	return (s8)gain;
  }
  
@@ -386,8 +849,43 @@
 +
  static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
  {
- 	int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+-	int i;
+-	u16 v;
+ 	u16 loc[3];
+ 
+ 	if (out->revision == 3)			/* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ 		loc[1] = SSB_SPROM1_ET0MAC;
+ 		loc[2] = SSB_SPROM1_ET1MAC;
+ 	}
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(loc[0]) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++	sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ 	if (out->revision < 3) { 	/* only rev 1-2 have et0, et1 */
+-		for (i = 0; i < 3; i++) {
+-			v = in[SPOFF(loc[1]) + i];
+-			*(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+-		}
+-		for (i = 0; i < 3; i++) {
+-			v = in[SPOFF(loc[2]) + i];
+-			*(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+-		}
++		sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++		sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ 	}
+ 	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ 	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ 	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ 	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ 	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	if (out->revision == 1)
+ 		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ 		     SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
  	     SSB_SPROM1_ITSSI_A_SHIFT);
  	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
  	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
@@ -397,7 +895,7 @@
  	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
  	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
  
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
  	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
  						    SSB_SPROM1_AGAIN_A,
  						    SSB_SPROM1_AGAIN_A_SHIFT);
@@ -406,6 +904,557 @@
  }
  
  /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+ 
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+-	int i;
+-	u16 v;
+ 	u16 il0mac_offset;
+ 
+ 	if (out->revision == 4)
+ 		il0mac_offset = SSB_SPROM4_IL0MAC;
+ 	else
+ 		il0mac_offset = SSB_SPROM5_IL0MAC;
+-	/* extract the MAC address */
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(il0mac_offset) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++
++	sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ 	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ 	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ 	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ 	SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	if (out->revision == 4) {
+ 		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ 		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+-	u16 v, o;
++	u16 o;
+ 	u16 pwr_info_offset[] = {
+ 		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ 		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ 			ARRAY_SIZE(out->core_pwr_info));
+ 
+ 	/* extract the MAC address */
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++	sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ 	SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ 	memset(out, 0, sizeof(*out));
+ 
+ 	out->revision = in[size - 1] & 0x00FF;
+-	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++	ssb_dbg("SPROM revision %d detected\n", out->revision);
+ 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
+ 	memset(out->et1mac, 0xFF, 6);
+ 
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ 		 * number stored in the SPROM.
+ 		 * Always extract r1. */
+ 		out->revision = 1;
+-		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++		ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ 	}
+ 
+ 	switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ 		sprom_extract_r8(out, in);
+ 		break;
+ 	default:
+-		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+-			   " revision %d detected. Will extract"
+-			   " v1\n", out->revision);
++		ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++			 out->revision);
+ 		out->revision = 1;
+ 		sprom_extract_r123(out, in);
+ 	}
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	u16 *buf;
+ 
+ 	if (!ssb_is_sprom_available(bus)) {
+-		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		ssb_err("No SPROM available!\n");
+ 		return -ENODEV;
+ 	}
+ 	if (bus->chipco.dev) {	/* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	} else {
+ 		bus->sprom_offset = SSB_SPROM_BASE1;
+ 	}
+-	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++	ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+ 
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ 			 * available for this device in some other storage */
+ 			err = ssb_fill_sprom_with_fallback(bus, sprom);
+ 			if (err) {
+-				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+-					   " fallback SPROM failed (err %d)\n",
+-					   err);
++				ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++					 err);
+ 			} else {
+-				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+-					    " revision %d provided by"
+-					    " platform.\n", sprom->revision);
++				ssb_dbg("Using SPROM revision %d provided by platform\n",
++					sprom->revision);
+ 				err = 0;
+ 				goto out_free;
+ 			}
+-			ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+-				   " SPROM CRC (corrupt SPROM)\n");
++			ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ 		}
+ 	}
+ 	err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++	ssb_err("Failed to switch to core %u\n", coreidx);
+ 	return err;
+ }
+ 
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ 	int err;
+ 
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+-	ssb_printk(KERN_INFO PFX
+-		   "Switching to %s core, index %d\n",
+-		   ssb_core_name(dev->id.coreid),
+-		   dev->core_index);
++	ssb_info("Switching to %s core, index %d\n",
++		 ssb_core_name(dev->id.coreid),
++		 dev->core_index);
+ #endif
+ 
+ 	err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++	ssb_err("Failed to switch pcmcia segment\n");
+ 	return err;
+ }
+ 
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ 	bool failed = 0;
+ 	size_t size = SSB_PCMCIA_SPROM_SIZE;
+ 
+-	ssb_printk(KERN_NOTICE PFX
+-		   "Writing SPROM. Do NOT turn off the power! "
+-		   "Please stand by...\n");
++	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ 	if (err) {
+-		ssb_printk(KERN_NOTICE PFX
+-			   "Could not enable SPROM write access.\n");
++		ssb_notice("Could not enable SPROM write access\n");
+ 		return -EBUSY;
+ 	}
+-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
++	ssb_notice("[ 0%%");
+ 	msleep(500);
+ 	for (i = 0; i < size; i++) {
+ 		if (i == size / 4)
+-			ssb_printk("25%%");
++			ssb_cont("25%%");
+ 		else if (i == size / 2)
+-			ssb_printk("50%%");
++			ssb_cont("50%%");
+ 		else if (i == (size * 3) / 4)
+-			ssb_printk("75%%");
++			ssb_cont("75%%");
+ 		else if (i % 2)
+-			ssb_printk(".");
++			ssb_cont(".");
+ 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ 		if (err) {
+-			ssb_printk(KERN_NOTICE PFX
+-				   "Failed to write to SPROM.\n");
++			ssb_notice("Failed to write to SPROM\n");
+ 			failed = 1;
+ 			break;
+ 		}
+ 	}
+ 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ 	if (err) {
+-		ssb_printk(KERN_NOTICE PFX
+-			   "Could not disable SPROM write access.\n");
++		ssb_notice("Could not disable SPROM write access\n");
+ 		failed = 1;
+ 	}
+ 	msleep(500);
+ 	if (!failed) {
+-		ssb_printk("100%% ]\n");
+-		ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++		ssb_cont("100%% ]\n");
++		ssb_notice("SPROM written\n");
+ 	}
+ 
+ 	return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ 	return -ENOSPC; /* continue with next entry */
+ 
+ error:
+-	ssb_printk(KERN_ERR PFX
++	ssb_err(
+ 		   "PCMCIA: Failed to fetch device invariants: %s\n",
+ 		   error_description);
+ 	return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ 	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ 				ssb_pcmcia_get_mac, sprom);
+ 	if (res != 0) {
+-		ssb_printk(KERN_ERR PFX
++		ssb_err(
+ 			"PCMCIA: Failed to fetch MAC address\n");
+ 		return -ENODEV;
+ 	}
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ 	if ((res == 0) || (res == -ENOSPC))
+ 		return 0;
+ 
+-	ssb_printk(KERN_ERR PFX
++	ssb_err(
+ 			"PCMCIA: Failed to fetch device invariants\n");
+ 	return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++	ssb_err("Failed to initialize PCMCIA host device\n");
+ 	return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ 		chipid_fallback = 0x4401;
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "PCI-ID not in fallback list\n");
++		ssb_err("PCI-ID not in fallback list\n");
+ 	}
+ 
+ 	return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ 	case 0x4704:
+ 		return 9;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "CHIPID not in nrcores fallback list\n");
++		ssb_err("CHIPID not in nrcores fallback list\n");
+ 	}
+ 
+ 	return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			bus->chip_package = 0;
+ 		}
+ 	}
+-	ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+-		   "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+-		   bus->chip_package);
++	ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++		 bus->chip_id, bus->chip_rev, bus->chip_package);
+ 	if (!bus->nr_devices)
+ 		bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+-		ssb_printk(KERN_ERR PFX
+-			   "More than %d ssb cores found (%d)\n",
+-			   SSB_MAX_NR_CORES, bus->nr_devices);
++		ssb_err("More than %d ssb cores found (%d)\n",
++			SSB_MAX_NR_CORES, bus->nr_devices);
+ 		goto err_unmap;
+ 	}
+ 	if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			nr_80211_cores++;
+ 			if (nr_80211_cores > 1) {
+ 				if (!we_support_multiple_80211_cores(bus)) {
+-					ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+-						    "802.11 core\n");
++					ssb_dbg("Ignoring additional 802.11 core\n");
+ 					continue;
+ 				}
+ 			}
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ 			if (bus->extif.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple EXTIFs found\n");
++				ssb_warn("WARNING: Multiple EXTIFs found\n");
+ 				break;
+ 			}
+ 			bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			break;
+ 		case SSB_DEV_CHIPCOMMON:
+ 			if (bus->chipco.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple ChipCommon found\n");
++				ssb_warn("WARNING: Multiple ChipCommon found\n");
+ 				break;
+ 			}
+ 			bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ 			if (bus->mipscore.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple MIPS cores found\n");
++				ssb_warn("WARNING: Multiple MIPS cores found\n");
+ 				break;
+ 			}
+ 			bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 				}
+ 			}
+ 			if (bus->pcicore.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple PCI(E) cores found\n");
++				ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ 				break;
+ 			}
+ 			bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 		goto out_kfree;
+ 	err = ssb_devices_freeze(bus, &freeze);
+ 	if (err) {
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++		ssb_err("SPROM write: Could not freeze all devices\n");
+ 		goto out_unlock;
+ 	}
+ 	res = sprom_write(bus, sprom);
+ 	err = ssb_devices_thaw(&freeze);
+ 	if (err)
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++		ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ 	mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -9,16 +9,27 @@
+ #define PFX	"ssb: "
+ 
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...)	do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...)					\
++	do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk		printk
++# define ssb_printk(fmt, ...)					\
++	printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+ 
++#define ssb_emerg(fmt, ...)	ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...)	ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...)	ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...)	ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...)	ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...)	ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...)	ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...)					\
++	ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...)	do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...)					\
++	do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+ 
+ #ifdef CONFIG_SSB_DEBUG
+@@ -217,6 +228,21 @@ extern u32 ssb_chipco_watchdog_timer_set
+ 					     u32 ticks);
+ extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+ 
++/* driver_chipcommon_sflash.c */
++#ifdef CONFIG_SSB_SFLASH
++int ssb_sflash_init(struct ssb_chipcommon *cc);
++#else
++static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++	pr_err("Serial flash not supported\n");
++	return 0;
++}
++#endif /* CONFIG_SSB_SFLASH */
++
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+ extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+ 
+ struct ssb_sprom {
+ 	u8 revision;
+-	u8 il0mac[6];		/* MAC address for 802.11b/g */
+-	u8 et0mac[6];		/* MAC address for Ethernet */
+-	u8 et1mac[6];		/* MAC address for 802.11a */
++	u8 il0mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11b/g */
++	u8 et0mac[6] __aligned(sizeof(u16));	/* MAC address for Ethernet */
++	u8 et1mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11a */
+ 	u8 et0phyaddr;		/* MII address for enet0 */
+ 	u8 et1phyaddr;		/* MII address for enet1 */
+ 	u8 et0mdcport;		/* MDIO for enet0 */
+@@ -340,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
+ #define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB	0x0406
++#define SSB_BOARD_BCM94301MP	0x0407
++#define SSB_BOARD_BU4309	0x040A
++#define SSB_BOARD_BCM94309CB	0x040B
++#define SSB_BOARD_BCM4309MP	0x040C
++#define SSB_BOARD_BU4306	0x0416
+ #define SSB_BOARD_BCM94306MP	0x0418
+ #define SSB_BOARD_BCM4309G	0x0421
+ #define SSB_BOARD_BCM4306CB	0x0417
+-#define SSB_BOARD_BCM4309MP	0x040C
++#define SSB_BOARD_BCM94306PC	0x0425	/* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG	0x042B	/* with SiGe PA */
++#define SSB_BOARD_PCSG94306	0x042D	/* with SiGe PA */
++#define SSB_BOARD_BU4704SD	0x042E	/* with sdram */
++#define SSB_BOARD_BCM94704AGR	0x042F	/* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP	0x0430	/* 11a-only minipci */
++#define SSB_BOARD_BU4318	0x0447
++#define SSB_BOARD_CB4318	0x0448
++#define SSB_BOARD_MPG4318	0x0449
+ #define SSB_BOARD_MP4318	0x044A
+-#define SSB_BOARD_BU4306	0x0416
+-#define SSB_BOARD_BU4309	0x040A
++#define SSB_BOARD_SD4318	0x044B
++#define SSB_BOARD_BCM94306P	0x044C	/* with SiGe */
++#define SSB_BOARD_BCM94303MP	0x044E
++#define SSB_BOARD_BCM94306MPM	0x0450
++#define SSB_BOARD_BCM94306MPL	0x0453
++#define SSB_BOARD_PC4303	0x0454	/* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA	0x0457
++#define SSB_BOARD_BCM94306MPH	0x045B
++#define SSB_BOARD_BCM94306PCIV	0x045C
++#define SSB_BOARD_BCM94318MPGH	0x0463
++#define SSB_BOARD_BU4311	0x0464
++#define SSB_BOARD_BCM94311MC	0x0465
++#define SSB_BOARD_BCM94311MCAG	0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321	0x046B
++#define SSB_BOARD_BU4321E	0x047C
++#define SSB_BOARD_MP4321	0x046C
++#define SSB_BOARD_CB2_4321	0x046D
++#define SSB_BOARD_CB2_4321_AG	0x0066
++#define SSB_BOARD_MC4321	0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU	0x0490
++#define SSB_BOARD_BCM94325BGABU	0x0491
++#define SSB_BOARD_BCM94325SDGWB	0x0492
++#define SSB_BOARD_BCM94325SDGMDL	0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2	0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3	0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA	0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC	0x04A4
++#define SSB_BOARD_BCM94322USB	0x04A8	/* dualband */
++#define SSB_BOARD_BCM94322HM	0x04B0
++#define SSB_BOARD_BCM94322USB2D	0x04Bf	/* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312	0x048A
++#define SSB_BOARD_BCM4312MCGSG	0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ 	return 0;
+ }
+ 
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+-	char buf[20];
+-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+-		return;
+-	nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++	if (!dev)
++		return -ENODEV;
++
++	memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++	return 0;
+ }
+-#endif
+ 
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ 					  struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ 	return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++	return -ENODEV;
++}
+ 
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+ 
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++	return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+ 
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
 @@ -289,11 +289,11 @@
diff --git a/target/linux/generic/patches-3.8/025-bcma_backport.patch b/target/linux/generic/patches-3.8/025-bcma_backport.patch
index c80275b..360ee71 100644
--- a/target/linux/generic/patches-3.8/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.8/025-bcma_backport.patch
@@ -28,6 +28,23 @@
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
  
  /* driver_chipcommon_pmu.c */
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ 		if (i)
+ 			bcma_err(core->bus, "PLL enable timeout\n");
+ 	} else {
+-		bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++		/*
++		 * Mask the PLL but don't wait for it to be disabled. PLL may be
++		 * shared between cores and will be still up if there is another
++		 * core using it.
++		 */
++		bcma_mask32(core, BCMA_CLKCTLST, ~req);
++		bcma_read32(core, BCMA_CLKCTLST);
+ 	}
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
 --- a/drivers/bcma/driver_chipcommon.c
 +++ b/drivers/bcma/driver_chipcommon.c
 @@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
@@ -87,6 +104,110 @@
  struct platform_device bcma_nflash_dev = {
  	.name		= "bcma_nflash",
  	.num_resources	= 0,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -264,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+ }
+ 
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+@@ -293,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+ 	}
+ 	return BCMA_CC_PMU_HT_CLOCK;
+ }
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+ 
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
+@@ -372,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -393,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -426,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -460,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -496,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
 --- a/drivers/bcma/driver_chipcommon_sflash.c
 +++ b/drivers/bcma/driver_chipcommon_sflash.c
 @@ -5,11 +5,11 @@
@@ -558,7 +679,16 @@
  		return cap_ptr;
  
  	/* check if the capability pointer field exists */
-@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
+@@ -401,6 +404,8 @@ void bcma_core_pci_hostmode_init(struct
+ 		return;
+ 	}
+ 
++	spin_lock_init(&pc_host->cfgspace_lock);
++
+ 	pc->host_controller = pc_host;
+ 	pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ 	pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+@@ -426,7 +431,7 @@ void bcma_core_pci_hostmode_init(struct
  	/* Reset RC */
  	usleep_range(3000, 5000);
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
@@ -567,7 +697,7 @@
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
  			BCMA_CORE_PCI_CTL_RST_OE);
  
-@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
+@@ -488,6 +493,17 @@ void bcma_core_pci_hostmode_init(struct
  
  	bcma_core_pci_enable_crs(pc);
  
@@ -585,7 +715,7 @@
  	/* Enable PCI bridge BAR0 memory & master access */
  	tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
  	bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
-@@ -576,7 +590,7 @@ int bcma_core_pci_plat_dev_init(struct p
+@@ -576,7 +592,7 @@ int bcma_core_pci_plat_dev_init(struct p
  	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
  
  	/* Fix up interrupt lines */
@@ -594,7 +724,7 @@
  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
  	return 0;
-@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
+@@ -595,6 +611,6 @@ int bcma_core_pci_pcibios_map_irq(const
  
  	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
  			       pci_ops);
@@ -615,7 +745,19 @@
  {
  	struct bcma_device *core;
  
-@@ -149,6 +149,14 @@ static int bcma_register_cores(struct bc
+@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+ 			continue;
+ 		}
+ 
++		/* Only first GMAC core on BCM4706 is connected and working */
++		if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++		    core->core_unit > 0)
++			continue;
++
+ 		core->dev.release = bcma_release_core_dev;
+ 		core->dev.bus = &bcma_bus_type;
+ 		dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+@@ -149,6 +154,14 @@ static int bcma_register_cores(struct bc
  		dev_id++;
  	}
  
@@ -630,6 +772,156 @@
  #ifdef CONFIG_BCMA_SFLASH
  	if (bus->drv_cc.sflash.present) {
  		err = platform_device_register(&bcma_sflash_dev);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+ 				       addr);
+ }
+ 
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = readl(*eromptr);
+ 	(*eromptr)++;
+ 	return ent;
+ }
+ 
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ 	(*eromptr)--;
+ }
+ 
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ 	return ent;
+ }
+ 
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	bcma_erom_push_ent(eromptr);
+ 	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+ 
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	bcma_erom_push_ent(eromptr);
+@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+ 		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+ 
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent;
+ 	while (1) {
+@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+ 	bcma_erom_push_ent(eromptr);
+ }
+ 
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+ 	return ent;
+ }
+ 
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ 				  u32 type, u8 port)
+ {
+ 	u32 addrl, addrh, sizel, sizeh = 0;
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+ 	}
+ 
+ 	SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+ 
+ 	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ 	     SSB_SPROM4_TXPID2G0_SHIFT);
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -134,6 +134,7 @@ struct bcma_host_ops {
+ #define BCMA_CORE_I2S			0x834
+ #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+ #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
++#define BCMA_CORE_ARM_CR4		0x83e
+ #define BCMA_CORE_DEFAULT		0xFFF
+ 
+ #define BCMA_MAX_NR_CORES		16
+@@ -173,6 +174,60 @@ struct bcma_host_ops {
+ #define BCMA_CHIP_ID_BCM53572	53572
+ #define  BCMA_PKG_ID_BCM47188	9
+ 
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU	0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM	0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA	0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG	0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2	0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21	0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC	0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B	0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93	0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A	0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16	0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9	0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E	0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8	0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9	0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU	0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L	0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB	0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L	0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD	0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19	0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28	0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B	0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX	0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G	0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G	0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B	0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX	0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C	0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33	0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU	0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU	0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC	0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI	0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4	0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM	0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL	0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5	0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS	0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD	0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU	0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2	0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2	0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2	0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM	0X05E0
++
+ struct bcma_device {
+ 	struct bcma_bus *bus;
+ 	struct bcma_device_id id;
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
 @@ -27,7 +27,7 @@
@@ -659,7 +951,15 @@
  #define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
  #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
  #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
-@@ -606,6 +610,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -528,6 +532,7 @@ struct bcma_sflash {
+ 	u32 size;
+ 
+ 	struct mtd_info *mtd;
++	void *priv;
+ };
+ #endif
+ 
+@@ -606,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
  
  extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
  
@@ -668,6 +968,13 @@
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
  u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+@@ -634,4 +641,6 @@ extern void bcma_chipco_regctl_maskset(s
+ 				       u32 offset, u32 mask, u32 set);
+ extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+ 
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
 --- a/include/linux/bcma/bcma_driver_mips.h
 +++ b/include/linux/bcma/bcma_driver_mips.h
 @@ -28,6 +28,7 @@
@@ -716,103 +1023,6 @@
  /* PCIE Root Capability Register bits (Host mode only) */
  #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
  
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
- 	struct bcma_bus *bus = cc->core->bus;
- 
- 	switch (bus->chipinfo.id) {
-+	case BCMA_CHIP_ID_BCM4313:
-+	case BCMA_CHIP_ID_BCM43224:
-+	case BCMA_CHIP_ID_BCM43225:
-+	case BCMA_CHIP_ID_BCM43227:
-+	case BCMA_CHIP_ID_BCM43228:
-+	case BCMA_CHIP_ID_BCM4331:
-+	case BCMA_CHIP_ID_BCM43421:
-+	case BCMA_CHIP_ID_BCM43428:
-+	case BCMA_CHIP_ID_BCM43431:
- 	case BCMA_CHIP_ID_BCM4716:
--	case BCMA_CHIP_ID_BCM4748:
- 	case BCMA_CHIP_ID_BCM47162:
--	case BCMA_CHIP_ID_BCM4313:
--	case BCMA_CHIP_ID_BCM5357:
-+	case BCMA_CHIP_ID_BCM4748:
- 	case BCMA_CHIP_ID_BCM4749:
-+	case BCMA_CHIP_ID_BCM5357:
- 	case BCMA_CHIP_ID_BCM53572:
-+	case BCMA_CHIP_ID_BCM6362:
- 		/* always 20Mhz */
- 		return 20000 * 1000;
--	case BCMA_CHIP_ID_BCM5356:
- 	case BCMA_CHIP_ID_BCM4706:
-+	case BCMA_CHIP_ID_BCM5356:
- 		/* always 25Mhz */
- 		return 25000 * 1000;
-+	case BCMA_CHIP_ID_BCM43460:
-+	case BCMA_CHIP_ID_BCM4352:
-+	case BCMA_CHIP_ID_BCM4360:
-+		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
-+			return 40000 * 1000;
-+		else
-+			return 20000 * 1000;
- 	default:
- 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
- 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -372,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
- 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
- 
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM4331:
-@@ -393,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
- 						     0x03000a08);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM43224:
-@@ -426,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 						     0x88888815);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM4716:
-@@ -460,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 						     0x88888815);
- 		}
- 
--		tmp = 3 << 9;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM43227:
-@@ -496,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 						     0x88888815);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 	default:
- 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
- #define BCMA_CORE_I2S			0x834
- #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
- #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4		0x83e
- #define BCMA_CORE_DEFAULT		0xFFF
- 
- #define BCMA_MAX_NR_CORES		16
 --- a/include/linux/bcma/bcma_regs.h
 +++ b/include/linux/bcma/bcma_regs.h
 @@ -37,6 +37,7 @@
diff --git a/target/linux/generic/patches-3.9/020-ssb_backport.patch b/target/linux/generic/patches-3.9/020-ssb_backport.patch
deleted file mode 100644
index d7dcbe8..0000000
--- a/target/linux/generic/patches-3.9/020-ssb_backport.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
- 	return (s8)gain;
- }
- 
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+	     SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
- 	int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
- 	     SSB_SPROM1_ITSSI_A_SHIFT);
- 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
--	if (out->revision >= 2)
--		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
- 
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
- 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- 						    SSB_SPROM1_AGAIN_A,
- 						    SSB_SPROM1_AGAIN_A_SHIFT);
-+	if (out->revision >= 2)
-+		sprom_extract_r23(out, in);
- }
- 
- /* Revs 4 5 and 8 have partially shared layout */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
- #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
- #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
- #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
--#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
--#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
--#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
--#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
--#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
-+#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
-+#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
-+#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
-+#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
-+#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
- #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
- #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
- #define  SSB_SPROM4_AGAIN0_SHIFT	0
diff --git a/target/linux/generic/patches-3.9/020-ssb_update.patch b/target/linux/generic/patches-3.9/020-ssb_update.patch
new file mode 100644
index 0000000..c87c2f6
--- /dev/null
+++ b/target/linux/generic/patches-3.9/020-ssb_update.patch
@@ -0,0 +1,1075 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
+ 
+ 	if (cc->dev->id.revision >= 11)
+ 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+-	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++	ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+ 
+ 	if (cc->dev->id.revision >= 20) {
+ 		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 		return;
+ 	}
+ 
+-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+-		   (crystalfreq / 1000), (crystalfreq % 1000));
++	ssb_info("Programming PLL to %u.%03u MHz\n",
++		 crystalfreq / 1000, crystalfreq % 1000);
+ 
+ 	/* First turn the PLL off. */
+ 	switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 	}
+ 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++		ssb_emerg("Failed to turn the PLL off!\n");
+ 
+ 	/* Set PDIV in PLL control 0. */
+ 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ 		return;
+ 	}
+ 
+-	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+-		   (crystalfreq / 1000), (crystalfreq % 1000));
++	ssb_info("Programming PLL to %u.%03u MHz\n",
++		 crystalfreq / 1000, crystalfreq % 1000);
+ 
+ 	/* First turn the PLL off. */
+ 	switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ 	}
+ 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+-		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++		ssb_emerg("Failed to turn the PLL off!\n");
+ 
+ 	/* Set p1div and p2div. */
+ 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	case 43222:
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PLL init unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PLL init unknown for device %04X\n",
++			bus->chip_id);
+ 	}
+ }
+ 
+@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ 		max_msk = 0xFFFFF;
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU resource config unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++			bus->chip_id);
+ 	}
+ 
+ 	if (updown_tab) {
+@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ 	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ 	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+ 
+-	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+-		    cc->pmu.rev, pmucap);
++	ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++		cc->pmu.rev, pmucap);
+ 
+ 	if (cc->pmu.rev == 1)
+ 		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
+ 	case 0x5354:
+ 		ssb_pmu_get_alp_clock_clk0(cc);
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU alp clock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ 		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ 		return 240000000;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU cpu clock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 	case 0x5354:
+ 		return 120000000;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "ERROR: PMU controlclock unknown for device %04X\n",
+-			   bus->chip_id);
++		ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++			bus->chip_id);
+ 		return 0;
+ 	}
+ }
+@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct
+ 		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ 		break;
+ 	case 43222:
+-		/* TODO: BCM43222 requires updating PLLs too */
+-		return;
++		if (spuravoid == 1) {
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++		} else {
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++		}
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+ 			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -167,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ 	}
+-	ssb_dprintk(KERN_INFO PFX
+-		    "set_irq: core 0x%04x, irq %d => %d\n",
+-		    dev->id.coreid, oldirq+2, irq+2);
++	ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++		dev->id.coreid, oldirq+2, irq+2);
+ }
+ 
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+-	int i;
+ 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+-	ssb_dprintk(KERN_INFO PFX
+-		"core 0x%04x, irq :", dev->id.coreid);
+-	for (i = 0; i <= 6; i++) {
+-		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+-	}
+-	ssb_dprintk("\n");
++	ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++		dev->id.coreid,
++		irq_name[0], irq == 0 ? "*" : " ",
++		irq_name[1], irq == 1 ? "*" : " ",
++		irq_name[2], irq == 2 ? "*" : " ",
++		irq_name[3], irq == 3 ? "*" : " ",
++		irq_name[4], irq == 4 ? "*" : " ",
++		irq_name[5], irq == 5 ? "*" : " ",
++		irq_name[6], irq == 6 ? "*" : " ");
+ }
+ 
+ static void dump_irq(struct ssb_bus *bus)
+@@ -286,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 	if (!mcore->dev)
+ 		return; /* We don't have a MIPS core */
+ 
+-	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++	ssb_dbg("Initializing MIPS core...\n");
+ 
+ 	bus = mcore->dev->bus;
+ 	hz = ssb_clockspeed(bus);
+@@ -334,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 			break;
+ 		}
+ 	}
+-	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++	ssb_dbg("after irq reconfiguration\n");
+ 	dump_irq(bus);
+ 
+ 	ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ 		return -ENODEV;
+ 	}
+ 
+-	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+-		   pci_name(d));
++	ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+ 
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ 		return;
+ 
+-	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++	ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+ 
+ 	/* Enable PCI bridge bus mastering and memory space */
+ 	pci_set_master(dev);
+ 	if (pcibios_enable_device(dev, ~0) < 0) {
+-		ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++		ssb_err("PCI: SSB bridge enable failed\n");
+ 		return;
+ 	}
+ 
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+ 
+ 	/* Make sure our latency is high enough to handle the devices behind us */
+ 	lat = 168;
+-	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+-		   pci_name(dev), lat);
++	ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++		 pci_name(dev), lat);
+ 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
+ 		return;
+ 	extpci_core = pc;
+ 
+-	ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++	ssb_dbg("PCIcore in host mode found\n");
+ 	/* Reset devices on the external PCI bus */
+ 	val = SSB_PCICORE_CTL_RST_OE;
+ 	val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
+ 	udelay(1); /* Assertion time demanded by the PCI standard */
+ 
+ 	if (pc->dev->bus->has_cardbus_slot) {
+-		ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++		ssb_dbg("CardBus slot detected\n");
+ 		pc->cardbusmode = 1;
+ 		/* GPIO 1 resets the bridge */
+ 		ssb_gpio_out(pc->dev->bus, 1, 1);
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
+ 					     bus->busnumber, &wdt,
+ 					     sizeof(wdt));
+ 	if (IS_ERR(pdev)) {
+-		ssb_dprintk(KERN_INFO PFX
+-			    "can not register watchdog device, err: %li\n",
+-			    PTR_ERR(pdev));
++		ssb_dbg("can not register watchdog device, err: %li\n",
++			PTR_ERR(pdev));
+ 		return PTR_ERR(pdev);
+ 	}
+ 
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+ 
+ 		err = sdrv->probe(sdev, &sdev->id);
+ 		if (err) {
+-			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+-				   dev_name(sdev->dev));
++			ssb_err("Failed to thaw device %s\n",
++				dev_name(sdev->dev));
+ 			result = err;
+ 		}
+ 		ssb_device_put(sdev);
+@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
+ 
+ 	err = ssb_gpio_unregister(bus);
+ 	if (err == -EBUSY)
+-		ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
++		ssb_dbg("Some GPIOs are still in use\n");
+ 	else if (err)
+-		ssb_dprintk(KERN_ERR PFX
+-			    "Can not unregister GPIO driver: %i\n", err);
++		ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+ 
+ 	ssb_buses_lock();
+ 	ssb_devices_unregister(bus);
+@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
+ 
+ 		devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ 		if (!devwrap) {
+-			ssb_printk(KERN_ERR PFX
+-				   "Could not allocate device\n");
++			ssb_err("Could not allocate device\n");
+ 			err = -ENOMEM;
+ 			goto error;
+ 		}
+@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
+ 		sdev->dev = dev;
+ 		err = device_register(dev);
+ 		if (err) {
+-			ssb_printk(KERN_ERR PFX
+-				   "Could not register %s\n",
+-				   dev_name(dev));
++			ssb_err("Could not register %s\n", dev_name(dev));
+ 			/* Set dev to NULL to not unregister
+ 			 * dev on error unwinding. */
+ 			sdev->dev = NULL;
+@@ -825,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+ 	ssb_mipscore_init(&bus->mipscore);
+ 	err = ssb_gpio_init(bus);
+ 	if (err == -ENOTSUPP)
+-		ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++		ssb_dbg("GPIO driver not activated\n");
+ 	else if (err)
+-		ssb_dprintk(KERN_ERR PFX
+-			   "Error registering GPIO driver: %i\n", err);
++		ssb_dbg("Error registering GPIO driver: %i\n", err);
+ 	err = ssb_fetch_invariants(bus, get_invariants);
+ 	if (err) {
+ 		ssb_bus_may_powerdown(bus);
+@@ -878,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
+ 
+ 	err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "PCI device %s\n", dev_name(&host_pci->dev));
++		ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++			 dev_name(&host_pci->dev));
+ 	} else {
+-		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+-			   " of SSB with error %d\n", err);
++		ssb_err("Failed to register PCI version of SSB with error %d\n",
++			err);
+ 	}
+ 
+ 	return err;
+@@ -903,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+ 
+ 	err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "PCMCIA device %s\n", pcmcia_dev->devname);
++		ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++			 pcmcia_dev->devname);
+ 	}
+ 
+ 	return err;
+@@ -925,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+ 
+ 	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+-			   "SDIO device %s\n", sdio_func_id(func));
++		ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++			 sdio_func_id(func));
+ 	}
+ 
+ 	return err;
+@@ -944,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+ 
+ 	err = ssb_bus_register(bus, get_invariants, baseaddr);
+ 	if (!err) {
+-		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+-			   "address 0x%08lX\n", baseaddr);
++		ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++			 baseaddr);
+ 	}
+ 
+ 	return err;
+@@ -1339,7 +1334,7 @@ out:
+ #endif
+ 	return err;
+ error:
+-	ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++	ssb_err("Bus powerdown failed\n");
+ 	goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1362,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++	ssb_err("Bus powerup failed\n");
+ 	return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1470,15 +1465,13 @@ static int __init ssb_modinit(void)
+ 
+ 	err = b43_pci_ssb_bridge_init();
+ 	if (err) {
+-		ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+-			   "initialization failed\n");
++		ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+ 	err = ssb_gige_init();
+ 	if (err) {
+-		ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+-			   "driver initialization failed\n");
++		ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ 	}
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++	ssb_err("Failed to switch to core %u\n", coreidx);
+ 	return -ENODEV;
+ }
+ 
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ 	unsigned long flags;
+ 
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+-	ssb_printk(KERN_INFO PFX
+-		   "Switching to %s core, index %d\n",
+-		   ssb_core_name(dev->id.coreid),
+-		   dev->core_index);
++	ssb_info("Switching to %s core, index %d\n",
++		 ssb_core_name(dev->id.coreid),
++		 dev->core_index);
+ #endif
+ 
+ 	spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ 	return t[crc ^ data];
+ }
+ 
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++	int i;
++	for (i = 0; i < 3; i++) {
++		*mac++ = in[i] >> 8;
++		*mac++ = in[i];
++	}
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ 	int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ 	u32 spromctl;
+ 	u16 size = bus->sprom_size;
+ 
+-	ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ 	if (err)
+ 		goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ 	if (err)
+ 		goto err_ctlreg;
+-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
++	ssb_notice("[ 0%%");
+ 	msleep(500);
+ 	for (i = 0; i < size; i++) {
+ 		if (i == size / 4)
+-			ssb_printk("25%%");
++			ssb_cont("25%%");
+ 		else if (i == size / 2)
+-			ssb_printk("50%%");
++			ssb_cont("50%%");
+ 		else if (i == (size * 3) / 4)
+-			ssb_printk("75%%");
++			ssb_cont("75%%");
+ 		else if (i % 2)
+-			ssb_printk(".");
++			ssb_cont(".");
+ 		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ 	if (err)
+ 		goto err_ctlreg;
+ 	msleep(500);
+-	ssb_printk("100%% ]\n");
+-	ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++	ssb_cont("100%% ]\n");
++	ssb_notice("SPROM written\n");
+ 
+ 	return 0;
+ err_ctlreg:
+-	ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++	ssb_err("Could not access SPROM control register.\n");
+ 	return err;
+ }
+ 
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+-	int i;
+-	u16 v;
+ 	u16 loc[3];
+ 
+ 	if (out->revision == 3)			/* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ 		loc[1] = SSB_SPROM1_ET0MAC;
+ 		loc[2] = SSB_SPROM1_ET1MAC;
+ 	}
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(loc[0]) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++	sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ 	if (out->revision < 3) { 	/* only rev 1-2 have et0, et1 */
+-		for (i = 0; i < 3; i++) {
+-			v = in[SPOFF(loc[1]) + i];
+-			*(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+-		}
+-		for (i = 0; i < 3; i++) {
+-			v = in[SPOFF(loc[2]) + i];
+-			*(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+-		}
++		sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++		sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ 	}
+ 	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ 	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ 	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ 	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ 	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	if (out->revision == 1)
+ 		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ 		     SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+ 
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
+ 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ 						    SSB_SPROM1_AGAIN_A,
+ 						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
+ }
+ 
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+ 
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+-	int i;
+-	u16 v;
+ 	u16 il0mac_offset;
+ 
+ 	if (out->revision == 4)
+ 		il0mac_offset = SSB_SPROM4_IL0MAC;
+ 	else
+ 		il0mac_offset = SSB_SPROM5_IL0MAC;
+-	/* extract the MAC address */
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(il0mac_offset) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++
++	sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ 	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ 	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ 	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ 	SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	if (out->revision == 4) {
+ 		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ 		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+-	u16 v, o;
++	u16 o;
+ 	u16 pwr_info_offset[] = {
+ 		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ 		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ 			ARRAY_SIZE(out->core_pwr_info));
+ 
+ 	/* extract the MAC address */
+-	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+-		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+-	}
++	sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ 	SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ 	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ 	memset(out, 0, sizeof(*out));
+ 
+ 	out->revision = in[size - 1] & 0x00FF;
+-	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++	ssb_dbg("SPROM revision %d detected\n", out->revision);
+ 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
+ 	memset(out->et1mac, 0xFF, 6);
+ 
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ 		 * number stored in the SPROM.
+ 		 * Always extract r1. */
+ 		out->revision = 1;
+-		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++		ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ 	}
+ 
+ 	switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ 		sprom_extract_r8(out, in);
+ 		break;
+ 	default:
+-		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+-			   " revision %d detected. Will extract"
+-			   " v1\n", out->revision);
++		ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++			 out->revision);
+ 		out->revision = 1;
+ 		sprom_extract_r123(out, in);
+ 	}
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	u16 *buf;
+ 
+ 	if (!ssb_is_sprom_available(bus)) {
+-		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		ssb_err("No SPROM available!\n");
+ 		return -ENODEV;
+ 	}
+ 	if (bus->chipco.dev) {	/* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	} else {
+ 		bus->sprom_offset = SSB_SPROM_BASE1;
+ 	}
+-	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++	ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+ 
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ 			 * available for this device in some other storage */
+ 			err = ssb_fill_sprom_with_fallback(bus, sprom);
+ 			if (err) {
+-				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+-					   " fallback SPROM failed (err %d)\n",
+-					   err);
++				ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++					 err);
+ 			} else {
+-				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+-					    " revision %d provided by"
+-					    " platform.\n", sprom->revision);
++				ssb_dbg("Using SPROM revision %d provided by platform\n",
++					sprom->revision);
+ 				err = 0;
+ 				goto out_free;
+ 			}
+-			ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+-				   " SPROM CRC (corrupt SPROM)\n");
++			ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ 		}
+ 	}
+ 	err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++	ssb_err("Failed to switch to core %u\n", coreidx);
+ 	return err;
+ }
+ 
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ 	int err;
+ 
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+-	ssb_printk(KERN_INFO PFX
+-		   "Switching to %s core, index %d\n",
+-		   ssb_core_name(dev->id.coreid),
+-		   dev->core_index);
++	ssb_info("Switching to %s core, index %d\n",
++		 ssb_core_name(dev->id.coreid),
++		 dev->core_index);
+ #endif
+ 
+ 	err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++	ssb_err("Failed to switch pcmcia segment\n");
+ 	return err;
+ }
+ 
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ 	bool failed = 0;
+ 	size_t size = SSB_PCMCIA_SPROM_SIZE;
+ 
+-	ssb_printk(KERN_NOTICE PFX
+-		   "Writing SPROM. Do NOT turn off the power! "
+-		   "Please stand by...\n");
++	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ 	if (err) {
+-		ssb_printk(KERN_NOTICE PFX
+-			   "Could not enable SPROM write access.\n");
++		ssb_notice("Could not enable SPROM write access\n");
+ 		return -EBUSY;
+ 	}
+-	ssb_printk(KERN_NOTICE PFX "[ 0%%");
++	ssb_notice("[ 0%%");
+ 	msleep(500);
+ 	for (i = 0; i < size; i++) {
+ 		if (i == size / 4)
+-			ssb_printk("25%%");
++			ssb_cont("25%%");
+ 		else if (i == size / 2)
+-			ssb_printk("50%%");
++			ssb_cont("50%%");
+ 		else if (i == (size * 3) / 4)
+-			ssb_printk("75%%");
++			ssb_cont("75%%");
+ 		else if (i % 2)
+-			ssb_printk(".");
++			ssb_cont(".");
+ 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ 		if (err) {
+-			ssb_printk(KERN_NOTICE PFX
+-				   "Failed to write to SPROM.\n");
++			ssb_notice("Failed to write to SPROM\n");
+ 			failed = 1;
+ 			break;
+ 		}
+ 	}
+ 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ 	if (err) {
+-		ssb_printk(KERN_NOTICE PFX
+-			   "Could not disable SPROM write access.\n");
++		ssb_notice("Could not disable SPROM write access\n");
+ 		failed = 1;
+ 	}
+ 	msleep(500);
+ 	if (!failed) {
+-		ssb_printk("100%% ]\n");
+-		ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++		ssb_cont("100%% ]\n");
++		ssb_notice("SPROM written\n");
+ 	}
+ 
+ 	return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ 	return -ENOSPC; /* continue with next entry */
+ 
+ error:
+-	ssb_printk(KERN_ERR PFX
++	ssb_err(
+ 		   "PCMCIA: Failed to fetch device invariants: %s\n",
+ 		   error_description);
+ 	return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ 	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ 				ssb_pcmcia_get_mac, sprom);
+ 	if (res != 0) {
+-		ssb_printk(KERN_ERR PFX
++		ssb_err(
+ 			"PCMCIA: Failed to fetch MAC address\n");
+ 		return -ENODEV;
+ 	}
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ 	if ((res == 0) || (res == -ENOSPC))
+ 		return 0;
+ 
+-	ssb_printk(KERN_ERR PFX
++	ssb_err(
+ 			"PCMCIA: Failed to fetch device invariants\n");
+ 	return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+ 
+ 	return 0;
+ error:
+-	ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++	ssb_err("Failed to initialize PCMCIA host device\n");
+ 	return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ 		chipid_fallback = 0x4401;
+ 		break;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "PCI-ID not in fallback list\n");
++		ssb_err("PCI-ID not in fallback list\n");
+ 	}
+ 
+ 	return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ 	case 0x4704:
+ 		return 9;
+ 	default:
+-		ssb_printk(KERN_ERR PFX
+-			   "CHIPID not in nrcores fallback list\n");
++		ssb_err("CHIPID not in nrcores fallback list\n");
+ 	}
+ 
+ 	return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			bus->chip_package = 0;
+ 		}
+ 	}
+-	ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+-		   "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+-		   bus->chip_package);
++	ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++		 bus->chip_id, bus->chip_rev, bus->chip_package);
+ 	if (!bus->nr_devices)
+ 		bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+-		ssb_printk(KERN_ERR PFX
+-			   "More than %d ssb cores found (%d)\n",
+-			   SSB_MAX_NR_CORES, bus->nr_devices);
++		ssb_err("More than %d ssb cores found (%d)\n",
++			SSB_MAX_NR_CORES, bus->nr_devices);
+ 		goto err_unmap;
+ 	}
+ 	if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			nr_80211_cores++;
+ 			if (nr_80211_cores > 1) {
+ 				if (!we_support_multiple_80211_cores(bus)) {
+-					ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+-						    "802.11 core\n");
++					ssb_dbg("Ignoring additional 802.11 core\n");
+ 					continue;
+ 				}
+ 			}
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ 			if (bus->extif.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple EXTIFs found\n");
++				ssb_warn("WARNING: Multiple EXTIFs found\n");
+ 				break;
+ 			}
+ 			bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			break;
+ 		case SSB_DEV_CHIPCOMMON:
+ 			if (bus->chipco.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple ChipCommon found\n");
++				ssb_warn("WARNING: Multiple ChipCommon found\n");
+ 				break;
+ 			}
+ 			bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ 			if (bus->mipscore.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple MIPS cores found\n");
++				ssb_warn("WARNING: Multiple MIPS cores found\n");
+ 				break;
+ 			}
+ 			bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 				}
+ 			}
+ 			if (bus->pcicore.dev) {
+-				ssb_printk(KERN_WARNING PFX
+-					   "WARNING: Multiple PCI(E) cores found\n");
++				ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ 				break;
+ 			}
+ 			bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 		goto out_kfree;
+ 	err = ssb_devices_freeze(bus, &freeze);
+ 	if (err) {
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++		ssb_err("SPROM write: Could not freeze all devices\n");
+ 		goto out_unlock;
+ 	}
+ 	res = sprom_write(bus, sprom);
+ 	err = ssb_devices_thaw(&freeze);
+ 	if (err)
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++		ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ 	mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -9,16 +9,27 @@
+ #define PFX	"ssb: "
+ 
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...)	do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...)					\
++	do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk		printk
++# define ssb_printk(fmt, ...)					\
++	printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+ 
++#define ssb_emerg(fmt, ...)	ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...)	ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...)	ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...)	ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...)	ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...)	ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...)	ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...)					\
++	ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...)	do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...)					\
++	do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+ 
+ #ifdef CONFIG_SSB_DEBUG
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+ 
+ struct ssb_sprom {
+ 	u8 revision;
+-	u8 il0mac[6];		/* MAC address for 802.11b/g */
+-	u8 et0mac[6];		/* MAC address for Ethernet */
+-	u8 et1mac[6];		/* MAC address for 802.11a */
++	u8 il0mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11b/g */
++	u8 et0mac[6] __aligned(sizeof(u16));	/* MAC address for Ethernet */
++	u8 et1mac[6] __aligned(sizeof(u16));	/* MAC address for 802.11a */
+ 	u8 et0phyaddr;		/* MII address for enet0 */
+ 	u8 et1phyaddr;		/* MII address for enet1 */
+ 	u8 et0mdcport;		/* MDIO for enet0 */
+@@ -340,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
+ #define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB	0x0406
++#define SSB_BOARD_BCM94301MP	0x0407
++#define SSB_BOARD_BU4309	0x040A
++#define SSB_BOARD_BCM94309CB	0x040B
++#define SSB_BOARD_BCM4309MP	0x040C
++#define SSB_BOARD_BU4306	0x0416
+ #define SSB_BOARD_BCM94306MP	0x0418
+ #define SSB_BOARD_BCM4309G	0x0421
+ #define SSB_BOARD_BCM4306CB	0x0417
+-#define SSB_BOARD_BCM4309MP	0x040C
++#define SSB_BOARD_BCM94306PC	0x0425	/* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG	0x042B	/* with SiGe PA */
++#define SSB_BOARD_PCSG94306	0x042D	/* with SiGe PA */
++#define SSB_BOARD_BU4704SD	0x042E	/* with sdram */
++#define SSB_BOARD_BCM94704AGR	0x042F	/* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP	0x0430	/* 11a-only minipci */
++#define SSB_BOARD_BU4318	0x0447
++#define SSB_BOARD_CB4318	0x0448
++#define SSB_BOARD_MPG4318	0x0449
+ #define SSB_BOARD_MP4318	0x044A
+-#define SSB_BOARD_BU4306	0x0416
+-#define SSB_BOARD_BU4309	0x040A
++#define SSB_BOARD_SD4318	0x044B
++#define SSB_BOARD_BCM94306P	0x044C	/* with SiGe */
++#define SSB_BOARD_BCM94303MP	0x044E
++#define SSB_BOARD_BCM94306MPM	0x0450
++#define SSB_BOARD_BCM94306MPL	0x0453
++#define SSB_BOARD_PC4303	0x0454	/* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA	0x0457
++#define SSB_BOARD_BCM94306MPH	0x045B
++#define SSB_BOARD_BCM94306PCIV	0x045C
++#define SSB_BOARD_BCM94318MPGH	0x0463
++#define SSB_BOARD_BU4311	0x0464
++#define SSB_BOARD_BCM94311MC	0x0465
++#define SSB_BOARD_BCM94311MCAG	0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321	0x046B
++#define SSB_BOARD_BU4321E	0x047C
++#define SSB_BOARD_MP4321	0x046C
++#define SSB_BOARD_CB2_4321	0x046D
++#define SSB_BOARD_CB2_4321_AG	0x0066
++#define SSB_BOARD_MC4321	0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU	0x0490
++#define SSB_BOARD_BCM94325BGABU	0x0491
++#define SSB_BOARD_BCM94325SDGWB	0x0492
++#define SSB_BOARD_BCM94325SDGMDL	0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2	0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3	0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA	0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC	0x04A4
++#define SSB_BOARD_BCM94322USB	0x04A8	/* dualband */
++#define SSB_BOARD_BCM94322HM	0x04B0
++#define SSB_BOARD_BCM94322USB2D	0x04Bf	/* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312	0x048A
++#define SSB_BOARD_BCM4312MCGSG	0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
diff --git a/target/linux/generic/patches-3.9/021-bcma_backport.patch b/target/linux/generic/patches-3.9/021-bcma_backport.patch
deleted file mode 100644
index 2885aea..0000000
--- a/target/linux/generic/patches-3.9/021-bcma_backport.patch
+++ /dev/null
@@ -1,140 +0,0 @@
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
- 	return value;
- }
- 
--static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
-+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
- {
- 	if (cc->capabilities & BCMA_CC_CAP_PMU)
- 		return bcma_pmu_get_alp_clock(cc);
- 
- 	return 20000000;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
- 
- static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
- {
-@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
- 
- 	return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
- 
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
- 
- 	return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
- 
- /*
-  * If the bit is set to 0, chipcommon controlls this GPIO,
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
- 	struct bcma_bus *bus = cc->core->bus;
- 
- 	switch (bus->chipinfo.id) {
-+	case BCMA_CHIP_ID_BCM4313:
-+	case BCMA_CHIP_ID_BCM43224:
-+	case BCMA_CHIP_ID_BCM43225:
-+	case BCMA_CHIP_ID_BCM43227:
-+	case BCMA_CHIP_ID_BCM43228:
-+	case BCMA_CHIP_ID_BCM4331:
-+	case BCMA_CHIP_ID_BCM43421:
-+	case BCMA_CHIP_ID_BCM43428:
-+	case BCMA_CHIP_ID_BCM43431:
- 	case BCMA_CHIP_ID_BCM4716:
--	case BCMA_CHIP_ID_BCM4748:
- 	case BCMA_CHIP_ID_BCM47162:
--	case BCMA_CHIP_ID_BCM4313:
--	case BCMA_CHIP_ID_BCM5357:
-+	case BCMA_CHIP_ID_BCM4748:
- 	case BCMA_CHIP_ID_BCM4749:
-+	case BCMA_CHIP_ID_BCM5357:
- 	case BCMA_CHIP_ID_BCM53572:
-+	case BCMA_CHIP_ID_BCM6362:
- 		/* always 20Mhz */
- 		return 20000 * 1000;
--	case BCMA_CHIP_ID_BCM5356:
- 	case BCMA_CHIP_ID_BCM4706:
-+	case BCMA_CHIP_ID_BCM5356:
- 		/* always 25Mhz */
- 		return 25000 * 1000;
-+	case BCMA_CHIP_ID_BCM43460:
-+	case BCMA_CHIP_ID_BCM4352:
-+	case BCMA_CHIP_ID_BCM4360:
-+		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
-+			return 40000 * 1000;
-+		else
-+			return 20000 * 1000;
- 	default:
- 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
- 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
- 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
- 
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM4331:
-@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
- 						     0x03000a08);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM43224:
-@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 						     0x88888815);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM4716:
-@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 						     0x88888815);
- 		}
- 
--		tmp = 3 << 9;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
- 		break;
- 
- 	case BCMA_CHIP_ID_BCM43227:
-@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 						     0x88888815);
- 		}
--		tmp = 1 << 10;
-+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- 		break;
- 	default:
- 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -104,6 +104,7 @@
- #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
- #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
- #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
-+#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
- #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
- #define  BCMA_CC_JCMD_START		0x80000000
- #define  BCMA_CC_JCMD_BUSY		0x80000000
-@@ -607,6 +608,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
- 
- extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
- 
-+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
-+
- void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
- 
- u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
diff --git a/target/linux/generic/patches-3.9/025-bcma_backport.patch b/target/linux/generic/patches-3.9/025-bcma_backport.patch
index 489dc20..a1a1ebc 100644
--- a/target/linux/generic/patches-3.9/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.9/025-bcma_backport.patch
@@ -1,3 +1,234 @@
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ 		if (i)
+ 			bcma_err(core->bus, "PLL enable timeout\n");
+ 	} else {
+-		bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++		/*
++		 * Mask the PLL but don't wait for it to be disabled. PLL may be
++		 * shared between cores and will be still up if there is another
++		 * core using it.
++		 */
++		bcma_mask32(core, BCMA_CLKCTLST, ~req);
++		bcma_read32(core, BCMA_CLKCTLST);
+ 	}
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
+ 	return value;
+ }
+ 
+-static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+ 	if (cc->capabilities & BCMA_CC_CAP_PMU)
+ 		return bcma_pmu_get_alp_clock(cc);
+ 
+ 	return 20000000;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+ 
+ static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+ {
+@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+ 
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+ 
+ /*
+  * If the bit is set to 0, chipcommon controlls this GPIO,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+ 			continue;
+ 		}
+ 
++		/* Only first GMAC core on BCM4706 is connected and working */
++		if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++		    core->core_unit > 0)
++			continue;
++
+ 		core->dev.release = bcma_release_core_dev;
+ 		core->dev.bus = &bcma_bus_type;
+ 		dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+ 				       addr);
+ }
+ 
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = readl(*eromptr);
+ 	(*eromptr)++;
+ 	return ent;
+ }
+ 
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ 	(*eromptr)--;
+ }
+ 
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ 	return ent;
+ }
+ 
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	bcma_erom_push_ent(eromptr);
+ 	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+ 
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	bcma_erom_push_ent(eromptr);
+@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+ 		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+ 
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent;
+ 	while (1) {
+@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+ 	bcma_erom_push_ent(eromptr);
+ }
+ 
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ 	u32 ent = bcma_erom_get_ent(bus, eromptr);
+ 	if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+ 	return ent;
+ }
+ 
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ 				  u32 type, u8 port)
+ {
+ 	u32 addrl, addrh, sizel, sizeh = 0;
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+ 	}
+ 
+ 	SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++	SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+ 
+ 	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ 	     SSB_SPROM4_TXPID2G0_SHIFT);
 --- a/include/linux/bcma/bcma.h
 +++ b/include/linux/bcma/bcma.h
 @@ -134,6 +134,7 @@ struct bcma_host_ops {
@@ -8,19 +239,78 @@
  #define BCMA_CORE_DEFAULT		0xFFF
  
  #define BCMA_MAX_NR_CORES		16
---- a/include/linux/bcma/bcma_regs.h
-+++ b/include/linux/bcma/bcma_regs.h
-@@ -37,6 +37,7 @@
- #define  BCMA_IOST_BIST_DONE		0x8000
- #define BCMA_RESET_CTL			0x0800
- #define  BCMA_RESET_CTL_RESET		0x0001
-+#define BCMA_RESET_ST			0x0804
+@@ -173,6 +174,60 @@ struct bcma_host_ops {
+ #define BCMA_CHIP_ID_BCM53572	53572
+ #define  BCMA_PKG_ID_BCM47188	9
  
- /* BCMA PCI config space registers. */
- #define BCMA_PCI_PMCSR			0x44
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU	0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM	0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA	0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG	0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2	0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21	0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC	0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B	0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93	0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A	0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16	0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9	0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E	0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8	0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9	0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU	0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L	0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB	0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L	0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD	0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19	0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28	0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B	0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX	0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G	0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G	0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B	0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX	0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C	0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33	0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU	0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU	0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC	0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI	0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4	0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM	0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL	0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5	0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS	0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD	0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU	0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2	0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2	0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2	0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM	0X05E0
++
+ struct bcma_device {
+ 	struct bcma_bus *bus;
+ 	struct bcma_device_id id;
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -316,6 +316,9 @@
+@@ -104,6 +104,7 @@
+ #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+ #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+ #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
+ #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+ #define  BCMA_CC_JCMD_START		0x80000000
+ #define  BCMA_CC_JCMD_BUSY		0x80000000
+@@ -315,6 +316,9 @@
  #define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
  #define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
  #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
@@ -30,3 +320,22 @@
  #define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
  #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
  #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+@@ -607,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ 
+ extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+ 
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
++
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ 
+ u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+--- a/include/linux/bcma/bcma_regs.h
++++ b/include/linux/bcma/bcma_regs.h
+@@ -37,6 +37,7 @@
+ #define  BCMA_IOST_BIST_DONE		0x8000
+ #define BCMA_RESET_CTL			0x0800
+ #define  BCMA_RESET_CTL_RESET		0x0001
++#define BCMA_RESET_ST			0x0804
+ 
+ /* BCMA PCI config space registers. */
+ #define BCMA_PCI_PMCSR			0x44