Add preliminary RouterBoard RB1xx support

SVN-Revision: 6839

45 files changed, 6688 insertions, 0 deletions

diff --git a/target/linux/rb1xx-2.6/Makefile b/target/linux/rb1xx-2.6/Makefile
new file mode 100644
index 0000000..17bd858
--- /dev/null
+++ b/target/linux/rb1xx-2.6/Makefile
@@ -0,0 +1,24 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mipsel
+BOARD:=rb1xx
+BOARDNAME:=Microtik RouterBoard 1xx
+FEATURES:=squashfs jffs2 broken
+
+define Target/Description
+	Build firmware images for ADMTek ADM5120 based boards
+	(e.g : RouterBoard RB1xx (111,112,133,153)
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
diff --git a/target/linux/rb1xx-2.6/config/default b/target/linux/rb1xx-2.6/config/default
new file mode 100644
index 0000000..2b018de
--- /dev/null
+++ b/target/linux/rb1xx-2.6/config/default
@@ -0,0 +1,251 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_ADM5120_GPIO=y
+CONFIG_ADM5120_NR_UARTS=2
+CONFIG_BASE_SMALL=0
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_CF_MIPS is not set
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfs=jffs2,squashfs init=/etc/preinit"
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_DDB5477 is not set
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_ELF_CORE=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GEN_RTC is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=y
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JOLIET is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MII=m
+# CONFIG_MINIX_FS is not set
+CONFIG_MINI_FO=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ADM5120=y
+CONFIG_MIPS_ADM5120_ENET=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_EV64120 is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_MTX1 is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_ADM5120 is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_RB500=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_ADM5120=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ADM5120=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_DOES_ECC=y
+CONFIG_YAFFS_ECC_WRONG_ORDER=y
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
new file mode 100644
index 0000000..a68b4a1
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y  := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
new file mode 100644
index 0000000..18e2674
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c
@@ -0,0 +1,186 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_switch.h>
+#include <myloader.h>
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+struct adm5120_info adm5120_info = {
+	.cpu_speed		= CPU_SPEED_175,
+	.cpu_package		= CPU_PACKAGE_PQFP,
+	.boot_loader		= BOOT_LOADER_UNKNOWN,
+	.board_type		= BOARD_TYPE_UNKNOWN
+};
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+	[BOOT_LOADER_UNKNOWN]	= "Unknown",
+	[BOOT_LOADER_CFE]	= "CFE",
+	[BOOT_LOADER_UBOOT]	= "U-Boot",
+	[BOOT_LOADER_MYLOADER]	= "MyLoader"
+};
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c)		((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c)		(((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c)		(((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c)	(((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c)		(((c) & CODE_NAB) != 0)
+
+static void __init detect_cpu_info(void)
+{
+	uint32_t *reg;
+	uint32_t code;
+	uint32_t clks;
+
+	reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE);
+	code = *reg;
+
+	clks = CODE_GET_CLKS(code);
+
+	adm5120_info.product_code = CODE_GET_PC(code);
+	adm5120_info.revision = CODE_GET_REV(code);
+
+	adm5120_info.cpu_speed = CPU_SPEED_175;
+	if (clks & 1)
+		adm5120_info.cpu_speed += 25000000;
+	if (clks & 2)
+		adm5120_info.cpu_speed += 50000000;
+
+	adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+		CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP;
+
+	adm5120_info.nand_boot = CODE_GET_NAB(code);
+
+}
+
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+	/*
+	 * This method only works, when we are booted directly from the CFE.
+	 */
+	uint32_t cfe_handle = (uint32_t) fw_arg0;
+	uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+	uint32_t cfe_entry = (uint32_t) fw_arg2;
+	uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+	/* Check for CFE by finding the CFE magic number */
+	if (cfe_seal != CFE_EPTSEAL) {
+		/* We are not booted from CFE */
+		return 0;
+	}
+
+	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+	if (cfe_a1_val != 0) {
+		return 0;
+	}
+
+	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+		return 0;
+	}
+
+	return 1;
+}
+
+static int __init detect_uboot(void)
+{
+	/* FIXME: not yet implemented */
+	return 0;
+}
+
+static int __init detect_myloader(void)
+{
+	struct mylo_system_params *sysp;
+	struct mylo_board_params *boardp;
+	struct mylo_partition_table *parts;
+
+	sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS);
+	boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS);
+	parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS);
+
+	/* Check for some magic numbers */
+	if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) ||
+	   (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) ||
+	   (parts->magic != MYLO_MAGIC_PARTITIONS))
+		return 0;
+
+	return 1;
+}
+
+static int __init detect_routerboot(void)
+{
+	/* FIXME: not yet implemented */
+	return 0;
+}
+
+static int __init detect_bootloader(void)
+{
+	if (detect_cfe())
+		return BOOT_LOADER_CFE;
+
+	if (detect_uboot())
+		return BOOT_LOADER_UBOOT;
+
+	if (detect_myloader())
+		return BOOT_LOADER_MYLOADER;
+
+	if (detect_routerboot())
+		return BOOT_LOADER_ROUTERBOOT;
+
+	return BOOT_LOADER_UNKNOWN;
+}
+
+/*
+ * Board detection
+ */
+static void __init detect_board_type(void)
+{
+	/* FIXME: not yet implemented */
+}
+
+void __init adm5120_info_show(void)
+{
+	printk("ADM%04X%s revision %d, running at %ldMHz\n",
+		adm5120_info.product_code,
+		(adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P",
+		adm5120_info.revision,
+		(adm5120_info.cpu_speed / 1000000)
+		);
+	printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]);
+	printk("Booted from   : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR");
+}
+
+void __init adm5120_info_init(void)
+{
+	detect_cpu_info();
+	adm5120_info.boot_loader = detect_bootloader();
+	detect_board_type();
+
+	adm5120_info_show();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
new file mode 100644
index 0000000..46f3bb0
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c
@@ -0,0 +1,156 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *		Creator : daniell@admtek.com.tw
+ *	Carsten Langgaard, carstenl@mips.com
+ *	Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ *	Copyright (C) 2001 Ralf Baechle
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq_cpu.h>
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern irq_desc_t irq_desc[];
+extern asmlinkage void mipsIRQ(void);
+
+int mips_int_lock(void);
+void mips_int_unlock(int);
+
+unsigned int mips_counter_frequency;
+
+#define ADM5120_INTC_REG(reg)	(*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
+#define ADM5120_INTC_STATUS	ADM5120_INTC_REG(0x00)
+#define ADM5120_INTC_ENABLE	ADM5120_INTC_REG(0x08)
+#define ADM5120_INTC_DISABLE	ADM5120_INTC_REG(0x0c)
+#define ADM5120_IRQ_MAX		9
+#define ADM5120_IRQ_MASK	0x3ff
+
+void adm5120_hw0_irqdispatch(struct pt_regs *regs)
+{
+	unsigned long intsrc;
+	int i;
+
+	intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
+
+	for (i = 0; intsrc; intsrc >>= 1, i++)
+		if (intsrc & 0x1)
+			do_IRQ(i);
+		else
+			spurious_interrupt();
+}
+
+void mips_timer_interrupt(struct pt_regs *regs)
+{
+        write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+        ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
+}
+
+/* Main interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+        unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+        if (cp0_cause & CAUSEF_IP7) {
+                mips_timer_interrupt( regs);
+        } else if (cp0_cause & CAUSEF_IP2) {
+                adm5120_hw0_irqdispatch( regs);
+        }
+}
+
+void enable_adm5120_irq(unsigned int irq)
+{
+	int s;
+
+	/* Disable all interrupts (FIQ/IRQ) */
+	s = mips_int_lock();
+
+	if ((irq < 0) || (irq > ADM5120_IRQ_MAX)) 
+		goto err_exit;
+
+	ADM5120_INTC_ENABLE = (1<<irq);
+
+err_exit:
+
+	/* Restore the interrupts states */
+	mips_int_unlock(s);
+}
+
+
+void disable_adm5120_irq(unsigned int irq)
+{
+	int s;
+
+	/* Disable all interrupts (FIQ/IRQ) */
+	s = mips_int_lock();
+
+	if ((irq < 0) || (irq > ADM5120_IRQ_MAX)) 
+		goto err_exit;
+
+	ADM5120_INTC_DISABLE = (1<<irq);
+
+err_exit:
+	/* Restore the interrupts states */
+	mips_int_unlock(s);
+}
+
+unsigned int startup_adm5120_irq(unsigned int irq)
+{
+	enable_adm5120_irq(irq);
+	return 0;
+}
+
+void shutdown_adm5120_irq(unsigned int irq)
+{
+	disable_adm5120_irq(irq);
+}
+
+static inline void ack_adm5120_irq(unsigned int irq_nr)
+{
+	ADM5120_INTC_DISABLE = (1 << irq_nr);
+}
+
+
+static void end_adm5120_irq(unsigned int irq_nr)
+{
+	ADM5120_INTC_ENABLE = (1 << irq_nr);
+}
+
+static hw_irq_controller adm5120_irq_type = {
+	.typename 	= "MIPS",
+	.startup	= startup_adm5120_irq,
+	.shutdown	= shutdown_adm5120_irq,
+	.enable		= enable_adm5120_irq,
+	.disable	= disable_adm5120_irq,
+	.ack 		= ack_adm5120_irq,
+	.end		= end_adm5120_irq,
+	.set_affinity	= NULL,
+};
+
+
+void __init arch_init_irq(void)
+{
+	int i;
+	
+	for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &adm5120_irq_type;
+	}
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
new file mode 100644
index 0000000..e5c7f0c
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c
@@ -0,0 +1,135 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ *	daniell@admtek.com.tw
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *****************************************************************************/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm-mips/mips-boards/prom.h>
+
+extern char *prom_getenv(char *envname);
+
+#define PFN_ALIGN(x)    (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+#define ADM5120_MEMCTRL			0x1200001c
+#define ADM5120_MEMCTRL_SDRAM_MASK	0x7
+
+static const unsigned long adm_sdramsize[] __initdata = {
+	0x0,		/* Reserved */
+	0x0400000,	/* 4Mb */
+	0x0800000,	/* 8Mb */
+	0x1000000,	/* 16Mb */
+	0x4000000,	/* 64Mb */
+	0x8000000,	/* 128Mb */
+};
+
+/* determined physical memory size, not overridden by command line args  */
+unsigned long physical_memsize = 0L;
+
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+	char *memsize_str;
+	unsigned int memsize;
+	char cmdline[CL_SIZE], *ptr;
+
+	memsize_str = prom_getenv("memsize");
+
+	if (!memsize_str)
+	{
+		prom_printf("memsize not set in boot prom, set to default (8Mb)\n");
+		physical_memsize = 0x00800000;
+	}
+	else
+#ifdef DEBUG
+		prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+		physical_memsize = simple_strtol(memsize_str, NULL, 0);
+
+	/* Check the command line for a memsize directive that overrides
+	 * the physical/default amount */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+	ptr = strstr(ptr, " memsize=");
+
+	if (ptr)
+		memsize = memparse(ptr + 8, &ptr);
+	else
+		memsize = physical_memsize;
+
+       memset(mdesc, 0, sizeof(mdesc));
+
+       mdesc[0].type = BOOT_MEM_RAM;
+       mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
+       mdesc[0].size = memsize - mdesc[0].base;
+
+       return &mdesc[0];
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+	p = prom_getmdesc();
+
+	while (p->size)
+	{
+		long type;
+		unsigned long base, size;
+		base = p->base;
+		type = p->type,
+		size = p->size;
+		add_memory_region(base, size, type);
+		p++;
+	}
+}
+
+#if 0
+void __init prom_meminit(void)
+{
+	unsigned long base = CPHYSADDR(PFN_ALIGN(&_end));
+	unsigned long size;
+
+	u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
+	size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
+	add_memory_region(base, size-base, BOOT_MEM_RAM);
+}
+#endif
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	/* We do not have to prom memory to free */
+        return 0;
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
new file mode 100644
index 0000000..f118fb4
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S
@@ -0,0 +1,135 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#define STATUS_IE	0x00000001
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ *       wired to UART1.
+ *	
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+
+NESTED(mipsIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		
+	mfc0	s1, CP0_STATUS
+	and     s0, s0, s1
+	
+	/* First we check for r4k counter/timer IRQ. */
+	andi	a0, s0, CAUSEF_IP7
+	beq		a0, zero, 1f
+	nop
+
+	move	a0, sp
+	jal		mips_timer_interrupt
+	nop
+
+	j		ret_from_irq
+	nop				
+
+1:
+	andi	a0, s0, CAUSEF_IP2
+	beq		a0, zero, 1f	
+	nop
+	
+	move	a0, sp			
+	jal		adm5120_hw0_irqdispatch	 
+	nop
+1:
+	j		ret_from_irq
+	nop							
+
+END(mipsIRQ)
+
+
+LEAF(mips_int_lock)
+	.set noreorder
+	mfc0	v0, CP0_STATUS
+	li		v1, ~STATUS_IE
+	and		v1, v1, v0
+	mtc0	v1, CP0_STATUS
+	j		ra
+	and		v0, v0, STATUS_IE
+	.set reorder
+END(mips_int_lock)
+
+
+LEAF(mips_int_unlock)
+	mfc0	v0, CP0_STATUS
+	and		a0, a0, STATUS_IE
+	or		v0, v0, a0
+	mtc0	v0, CP0_STATUS
+	j		ra
+	nop
+END(mips_int_unlock)
+
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
new file mode 100644
index 0000000..e644fc3
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c
@@ -0,0 +1,118 @@
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ *	daniell@admtek.com.tw
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+
+void setup_prom_printf(int);
+void prom_printf(char *, ...);
+void prom_meminit(void);
+
+#define ADM5120_ENVC           1
+
+char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"};
+
+#define READCSR(r)      *(volatile unsigned long *)(0xB2600000+(r))
+#define WRITECSR(r,v)   *(volatile unsigned long *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG         0x00
+#define UART_FR_REG         0x18
+#define UART_TX_FIFO_FULL   0x20
+
+int putPromChar(char c)
+{
+	WRITECSR(UART_DR_REG, c);
+        while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+        return 0;
+}
+
+/*
+ * Ugly prom_printf used for debugging
+ */
+
+void prom_printf(char *fmt, ...)
+{
+        va_list args;
+        int l;
+        char *p, *buf_end;
+        char buf[1024];
+
+        va_start(args, fmt);
+        l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+        va_end(args);
+
+        buf_end = buf + l;
+
+        for (p = buf; p < buf_end; p++) {
+                /* Crude cr/nl handling is better than none */
+                if (*p == '\n')
+                        putPromChar('\r');
+                putPromChar(*p);
+        }
+}
+
+char *prom_getenv(char *envname)
+{
+	int i, index=0;
+
+	i = strlen(envname);
+
+	printk(KERN_INFO "GETENV: envname is %s\n", envname);
+
+	while(index < (2*ADM5120_ENVC)) {
+		if(strncmp(envname, adm5120_envp[index], i) == 0) {
+			printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]);
+			return(adm5120_envp[index+1]);
+		}
+		index += 2;
+	}
+
+	printk(KERN_INFO "GETENV: not found.\n");
+	return(NULL);
+}
+
+	
+/*
+ * initialize the prom module.
+ */
+void __init prom_init(void)
+{
+	/* you should these macros defined in include/asm/bootinfo.h */
+	mips_machgroup = MACH_GROUP_ADM_GW;
+	mips_machtype = MACH_ADM_GW_5120;
+	
+	adm5120_info_init();
+
+	/* init command line, register a default kernel command line */
+	strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+
+	/* init memory map */
+	prom_meminit();
+}
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
new file mode 100644
index 0000000..1b99d77
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c
@@ -0,0 +1,106 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *		Creator : daniell@admtek.com.tw
+ *	Copyright 1999, 2000 MIPS Technologies, Inc.
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <adm5120_info.h>
+
+#define ADM5120_SOFTRESET	0x12000004
+#define STATUS_IE		0x00000001
+#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
+
+void  mips_time_init(void);
+
+extern unsigned int mips_counter_frequency;
+
+void adm5120_restart(char *command)
+{
+	*(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+
+void adm5120_halt(void)
+{
+        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+        while (1);
+}
+
+
+void adm5120_power_off(void)
+{
+        adm5120_halt();
+}
+
+void __init adm5120_time_init(void)
+{
+	mips_counter_frequency = adm5120_info.cpu_speed >> 1;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	/* to generate the first timer interrupt */
+	write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+	clear_c0_status(ST0_BEV);
+	set_c0_status(ALLINTS);
+}
+
+void __init plat_mem_setup(void)
+{
+	printk(KERN_INFO "ADM5120 board setup\n");
+
+	board_time_init = adm5120_time_init;
+	//board_timer_setup = mips_timer_setup;
+
+	_machine_restart = adm5120_restart;
+	_machine_halt = adm5120_halt;
+	pm_power_off = adm5120_power_off;
+
+	set_io_port_base(KSEG1);
+}
+
+const char *get_system_type(void)
+{
+	return "ADM5120 Board";
+}
+
+static struct resource adm5120_hcd_resources[] = {
+	[0] = {
+		.start	= 0x11200000,
+		.end	= 0x11200084,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x3,
+		.end	= 0x3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device adm5120hcd_device = {
+	.name		= "adm5120-hcd",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(adm5120_hcd_resources),
+	.resource	= adm5120_hcd_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&adm5120hcd_device,
+};
+
+static int __init adm5120_init(void)
+{
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+subsys_initcall(adm5120_init);
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
new file mode 100644
index 0000000..91dae89
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c
@@ -0,0 +1,63 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *	Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *	Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_defs.h>
+
+volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
+volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
+
+#define PCI_ENABLE 0x80000000
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, uint32_t *val)
+{
+	*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+	    ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+	switch (size) {
+		case 1:
+			*val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
+			break;
+		case 2:
+			*val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
+			break;
+		default:
+			*val = (*pci_config_data_reg);
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+                            int size, uint32_t val)
+{
+	*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+	    ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+	switch (size) {
+		case 1:
+			*(volatile u8 *)(((int)pci_config_data_reg) +
+			    (where & 3)) = val;
+			break;
+		case 2:
+			*(volatile u16 *)(((int)pci_config_data_reg) +
+			    (where & 2)) = (val);
+			break;
+		default:
+			*pci_config_data_reg = (val);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+	.read	= pci_config_read,
+	.write	= pci_config_write,
+};
diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
new file mode 100644
index 0000000..78de001
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c
@@ -0,0 +1,96 @@
+/*
+ *	Copyright (C) ADMtek Incorporated.
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *	Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *	Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+
+extern struct pci_ops adm5120_pci_ops;
+
+#define PCI_CMM_IOACC_EN	0x1
+#define PCI_CMM_MEMACC_EN	0x2
+#define PCI_CMM_MASTER_EN	0x4
+#define PCI_CMM_DEF \
+		(PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
+
+#define PCI_DEF_CACHE_LINE_SZ	4
+
+
+struct resource pci_io_resource = {
+	.name = "ADM5120 PCI I/O",
+	.start = ADM5120_PCIIO_BASE,
+	.end = ADM5120_PCICFG_ADDR-1,
+	.flags = IORESOURCE_IO
+};
+
+struct resource pci_mem_resource = {
+	.name = "ADM5120 PCI MEM",
+	.start = ADM5120_PCIMEM_BASE,
+	.end = ADM5120_PCIIO_BASE-1,
+	.flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+	.pci_ops	= &adm5120_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot < 2 || slot > 4)
+		return -1;
+	return slot + 4;
+}
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+	if (dev->devfn == 0) {
+		pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+		    PCI_DEF_CACHE_LINE_SZ);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
+
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static int __init adm5120_pci_setup(void)
+{
+	int pci_bios;
+
+	pci_bios = adm5120_has_pci();
+
+	printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
+	if (pci_bios == 0)
+		return 1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00000000;
+	PCIBIOS_MIN_MEM = 0x00000000;
+
+	/* Set I/O resource limits.  */
+	ioport_resource.end = 0x1fffffff;
+	iomem_resource.end = 0xffffffff;
+
+	register_pci_controller(&adm5120_controller);
+	return 0;
+}
+
+subsys_initcall(adm5120_pci_setup);
diff --git a/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c b/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c
new file mode 100644
index 0000000..6fccfb0
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/char/adm5120_gpio.c
@@ -0,0 +1,58 @@
+/*
+ *	ADM5120 LED (GPIO) driver
+ *
+ *	Copyright (C) Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+
+#define LED_MINOR 151
+#define GPIO_IO        ((unsigned long *)0xb20000b8)
+
+static ssize_t adm5120_led_write(struct file *file, const char __user *data,
+	size_t len, loff_t *ppos)
+{
+	unsigned char val;
+
+	if (!len || get_user(val, data))
+		return -EFAULT;
+	*GPIO_IO=(*GPIO_IO & 0x00ffffff) | (val<<24);
+	return 1;
+}
+
+static struct file_operations adm5120_led_fops = {
+	.owner	= THIS_MODULE,
+	.write	= adm5120_led_write,
+};
+
+static struct miscdevice adm5120_led_device = {
+	LED_MINOR,
+	"led",
+	&adm5120_led_fops,
+};
+
+static int __init adm5120_led_init(void)
+{
+	printk(KERN_INFO "ADM5120 LED & GPIO driver\n");
+	if (misc_register(&adm5120_led_device)) {
+		printk(KERN_WARNING "Couldn't register device %d\n", LED_MINOR);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void __exit adm5120_led_exit(void)
+{
+	misc_deregister(&adm5120_led_device);
+}
+
+module_init(adm5120_led_init);
+module_exit(adm5120_led_exit);
+
+MODULE_DESCRIPTION("ADM5120 LED and GPIO driver");
+MODULE_AUTHOR("Jeroen Vreeken");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c
new file mode 100644
index 0000000..9d6588a
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/mtd/nand/rbmipsnand.c
@@ -0,0 +1,196 @@
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+#ifdef CONFIG_MIPS_ADM5120
+#include <asm/mach-adm5120/adm5120_defs.h>
+#endif
+
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+
+#define GPIOF 0x050000
+#define GPIOC 0x050004
+#define GPIOD 0x050008
+
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+#define DEV2BASE 0x010020
+
+#define LO_WPX   (1 << 0)
+#define LO_ALE   (1 << 1)
+#define LO_CLE   (1 << 2)
+#define LO_CEX   (1 << 3)
+#define LO_FOFF  (1 << 5)
+#define LO_SPICS (1 << 6)
+#define LO_ULED  (1 << 7)
+
+#define MEM32(x) *((volatile unsigned *) (x))
+
+
+/* RouterBoard RB1xx specific definitions */
+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
+
+#define NAND_RW_REG     0x0     //data register
+#define NAND_SET_CEn    0x1     //CE# low
+#define NAND_CLR_CEn    0x2     //CE# high
+#define NAND_CLR_CLE    0x3     //CLE low
+#define NAND_SET_CLE    0x4     //CLE high
+#define NAND_CLR_ALE    0x5     //ALE low
+#define NAND_SET_ALE    0x6     //ALE high
+#define NAND_SET_SPn    0x7     //SP# low (use spare area)
+#define NAND_CLR_SPn    0x8     //SP# high (do not use spare area)
+#define NAND_SET_WPn    0x9     //WP# low
+#define NAND_CLR_WPn    0xA     //WP# high
+#define NAND_STS_REG    0xB     //Status register
+
+static void __iomem *p_nand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
+
+static int rb500_dev_ready(struct mtd_info *mtd)
+{
+	return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ *     NAND_CLE: bit 2 -> bit 3 
+ *     NAND_ALE: bit 3 -> bit 2
+ */
+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
+				unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned char orbits, nandbits;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+
+		orbits = (ctrl & NAND_CLE) << 1;
+		orbits |= (ctrl & NAND_ALE) >> 1;
+
+		nandbits = (~ctrl & NAND_CLE) << 1;
+		nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+		changeLatchU5(orbits, nandbits);
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+
+}
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+static int rb100_dev_ready(struct mtd_info *mtd)
+{
+	return SMEM1(NAND_STS_REG) & 0x80; /* found out by experiment */
+}
+
+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	
+	if (ctrl & NAND_CTRL_CHANGE)
+		SMEM1(ctrl) = 0x01;
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+#endif
+
+
+static struct mtd_partition partition_info[] = {
+	{
+	      name:"RouterBoard NAND Boot",
+	      offset:0,
+      size:4 * 1024 * 1024},
+	{
+	      name:"RouterBoard NAND Main",
+	      offset:MTDPART_OFS_NXTBLK,
+      size:MTDPART_SIZ_FULL}
+};
+
+static struct mtd_info rmtd;
+static struct nand_chip rnand;
+
+static unsigned init_ok = 0;
+
+unsigned get_rbnand_block_size(void)
+{
+	if (init_ok)
+		return rmtd.writesize;
+	else
+		return 0;
+}
+
+EXPORT_SYMBOL(get_rbnand_block_size);
+
+int __init rbmips_init(void)
+{
+	memset(&rmtd, 0, sizeof(rmtd));
+	memset(&rnand, 0, sizeof(rnand));
+
+#ifdef CONFIG_MIKROTIK_RB500
+	printk("RB500 nand\n");
+	changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
+		      LO_ULED | LO_ALE | LO_CLE);
+	rnand.cmd_ctrl = rbmips_hwcontrol500;
+
+	rnand.dev_ready = rb500_dev_ready;
+	rnand.IO_ADDR_W = (unsigned char *)
+	    KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
+	rnand.IO_ADDR_R = rnand.IO_ADDR_W;
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+	printk("RB100 nand\n");
+	/* enable NAND flash */
+	MEM32(0xB2000064) = 0x100;
+	/* boot done */
+	MEM32(0xB2000008) = 0x1;
+	SMEM1(NAND_SET_SPn) = 0x01;
+	SMEM1(NAND_CLR_WPn) = 0x01;
+	rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
+	rnand.IO_ADDR_W = rnand.IO_ADDR_R;
+	rnand.cmd_ctrl = rbmips_hwcontrol100;
+	rnand.dev_ready = rb100_dev_ready;
+#endif
+	p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
+	if (!p_nand) {
+		printk("RBnand Unable ioremap buffer");
+		return -ENXIO;
+	}
+	rnand.ecc.mode = NAND_ECC_SOFT;
+	rnand.chip_delay = 25;
+	rnand.options |= NAND_NO_AUTOINCR;
+	rmtd.priv = &rnand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+	int *b;
+
+	b = (int *) KSEG1ADDR(0x18010020);
+	printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
+	       b[1], b[2], b[3]);
+#endif
+
+	if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
+	    && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
+		printk("RBxxx nand device not found");
+		iounmap((void *) p_nand);
+		return -ENXIO;
+	}
+
+	add_mtd_partitions(&rmtd, partition_info, 2);
+	init_ok = 1;
+	return 0;
+}
+
+module_init(rbmips_init);
diff --git a/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c
new file mode 100644
index 0000000..fb1752b
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.c
@@ -0,0 +1,507 @@
+/*
+ *	ADM5120 built in ethernet switch driver
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ *	Inspiration for this driver came from the original ADMtek 2.4 
+ *	driver, Copyright ADMtek Inc.
+ */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <asm/mipsregs.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "adm5120sw.h"
+
+#include "adm5120_info.h"
+
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
+MODULE_LICENSE("GPL");
+
+/*
+ *	The ADM5120 uses an internal matrix to determine which ports
+ *	belong to which VLAN.
+ *	The default generates a VLAN (and device) for each port 
+ *	(including MII port) and the CPU port is part of all of them.
+ *
+ *	Another example, one big switch and everything mapped to eth0:
+ *	0x7f, 0x00, 0x00, 0x00, 0x00, 0x00
+ */
+static unsigned char vlan_matrix[SW_DEVS] = {
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x60
+};
+
+static int adm5120_nrdevs;
+
+static struct net_device *adm5120_devs[SW_DEVS];
+static struct adm5120_dma 
+    adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
+    adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
+    adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
+    adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
+    *adm5120_dma_txh,
+    *adm5120_dma_txl,
+    *adm5120_dma_rxh,
+    *adm5120_dma_rxl;
+static struct sk_buff
+    *adm5120_skb_rxh[ADM5120_DMA_RXH],
+    *adm5120_skb_rxl[ADM5120_DMA_RXL],
+    *adm5120_skb_txh[ADM5120_DMA_TXH],
+    *adm5120_skb_txl[ADM5120_DMA_TXL];
+static int adm5120_rxhi = 0;
+static int adm5120_rxli = 0;
+/* We don't use high priority tx for now */
+/*static int adm5120_txhi = 0;*/
+static int adm5120_txli = 0;
+static int adm5120_txhit = 0;
+static int adm5120_txlit = 0;
+static int adm5120_if_open = 0;
+
+static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+{
+	*(volatile unsigned long*)(SW_BASE+reg) = val;
+}
+
+static inline unsigned long adm5120_get_reg(unsigned int reg)
+{
+	return *(volatile unsigned long*)(SW_BASE+reg);
+}
+
+static inline void adm5120_rxfixup(struct adm5120_dma *dma,
+    struct sk_buff **skbl, int num)
+{
+	int i;
+
+	/* Resubmit the entire ring */
+	for (i=0; i<num; i++) {
+		dma[i].status = 0;
+		dma[i].cntl = 0;
+		dma[i].len = ADM5120_DMA_RXSIZE;
+		dma[i].data = ADM5120_DMA_ADDR(skbl[i]->data) |
+		     ADM5120_DMA_OWN | (i==num-1 ? ADM5120_DMA_RINGEND : 0);
+	}
+}
+
+static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
+    int *index, int num)
+{
+	struct sk_buff *skb, *skbn;
+	struct adm5120_sw *priv;
+	struct net_device *dev;
+	int port, vlan, len;
+
+	while (!(dma[*index].data & ADM5120_DMA_OWN)) {
+		port = (dma[*index].status & ADM5120_DMA_PORTID);
+		port >>= ADM5120_DMA_PORTSHIFT;
+		for (vlan = 0; vlan < adm5120_nrdevs; vlan++) {
+			if ((1<<port) & vlan_matrix[vlan])
+				break;
+		}
+		if (vlan == adm5120_nrdevs)
+			vlan = 0;
+		dev = adm5120_devs[vlan];
+		skb = skbl[*index];
+		len = (dma[*index].status & ADM5120_DMA_LEN);
+		len >>= ADM5120_DMA_LENSHIFT;
+		len -= ETH_FCS;
+
+		priv = netdev_priv(dev);
+		if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
+		    dma[*index].status & ADM5120_DMA_FCSERR) {
+			priv->stats.rx_errors++;
+			skbn = NULL;
+		} else {
+			skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+			if (skbn) {
+				skb_put(skb, len);
+				skb->dev = dev;
+				skb->protocol = eth_type_trans(skb, dev);
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				dev->last_rx = jiffies;
+				priv->stats.rx_packets++;
+				priv->stats.rx_bytes+=len;
+				skb_reserve(skbn, 2);
+				skbl[*index] = skbn;
+			} else {
+				printk(KERN_INFO "%s recycling!\n", dev->name);
+			}
+		}
+
+		dma[*index].status = 0;
+		dma[*index].cntl = 0;
+		dma[*index].len = ADM5120_DMA_RXSIZE;
+		dma[*index].data = ADM5120_DMA_ADDR(skbl[*index]->data) |
+		     ADM5120_DMA_OWN |
+		     (num-1==*index ? ADM5120_DMA_RINGEND : 0);
+		if (num == ++*index)
+			*index = 0;
+		if (skbn)
+			netif_rx(skb);
+	}
+}
+
+static inline void adm5120_tx(struct adm5120_dma *dma, struct sk_buff **skbl,
+    int *index, int num)
+{
+	while((dma[*index].data & ADM5120_DMA_OWN) == 0 && skbl[*index]) {
+		dev_kfree_skb_irq(skbl[*index]);
+		skbl[*index] = NULL;
+		if (++*index == num)
+			*index = 0;
+	}
+}
+
+static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+{
+	unsigned long intreg;
+
+	adm5120_set_reg(ADM5120_INT_MASK,
+	    adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTHANDLE);
+
+	intreg = adm5120_get_reg(ADM5120_INT_ST);
+	adm5120_set_reg(ADM5120_INT_ST, intreg);
+
+	if (intreg & ADM5120_INT_RXH)
+		adm5120_rx(adm5120_dma_rxh, adm5120_skb_rxh, &adm5120_rxhi,
+		ADM5120_DMA_RXH);
+	if (intreg & ADM5120_INT_HFULL)
+		adm5120_rxfixup(adm5120_dma_rxh, adm5120_skb_rxh,
+		ADM5120_DMA_RXH);
+	if (intreg & ADM5120_INT_RXL)
+		adm5120_rx(adm5120_dma_rxl, adm5120_skb_rxl, &adm5120_rxli,
+		    ADM5120_DMA_RXL);
+	if (intreg & ADM5120_INT_LFULL)
+		adm5120_rxfixup(adm5120_dma_rxl, adm5120_skb_rxl,
+		ADM5120_DMA_RXL);
+	if (intreg & ADM5120_INT_TXH)
+		adm5120_tx(adm5120_dma_txh, adm5120_skb_txh, &adm5120_txhit,
+		ADM5120_DMA_TXH);
+	if (intreg & ADM5120_INT_TXL)
+		adm5120_tx(adm5120_dma_txl, adm5120_skb_txl, &adm5120_txlit,
+		ADM5120_DMA_TXL);
+
+	adm5120_set_reg(ADM5120_INT_MASK,
+	    adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+
+	return IRQ_HANDLED;
+}
+
+static void adm5120_set_vlan(char *matrix)
+{
+	unsigned long val;
+
+	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+	adm5120_set_reg(ADM5120_VLAN_GI, val);
+	val = matrix[4] + (matrix[5]<<8);
+	adm5120_set_reg(ADM5120_VLAN_GII, val);
+}
+
+static int adm5120_sw_open(struct net_device *dev)
+{
+	if (!adm5120_if_open++)
+		adm5120_set_reg(ADM5120_INT_MASK,
+		    adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int adm5120_sw_stop(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	if (!--adm5120_if_open)
+		adm5120_set_reg(ADM5120_INT_MASK,
+		    adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTMASKALL);
+	return 0;
+}
+
+static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct adm5120_dma *dma = adm5120_dma_txl;
+	struct sk_buff **skbl = adm5120_skb_txl;
+	struct adm5120_sw *priv = netdev_priv(dev);
+	int *index = &adm5120_txli;
+	int num = ADM5120_DMA_TXL;
+	int trigger = ADM5120_SEND_TRIG_L;
+
+	dev->trans_start = jiffies;
+	if (dma[*index].data & ADM5120_DMA_OWN) {
+		dev_kfree_skb(skb);
+		priv->stats.tx_dropped++;
+		return 0;
+	}
+
+	dma[*index].data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
+	if (*index == num-1)
+		dma[*index].data |= ADM5120_DMA_RINGEND;
+	dma[*index].status =
+	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+	    (0x1 << priv->port);
+	dma[*index].len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+	priv->stats.tx_packets++;
+	priv->stats.tx_bytes += skb->len;
+	skbl[*index]=skb;
+
+	if (++*index == num)
+		*index = 0;
+	adm5120_set_reg(ADM5120_SEND_TRIG, trigger);
+
+	return 0;
+}
+
+static void adm5120_tx_timeout(struct net_device *dev)
+{
+	netif_wake_queue(dev);
+}
+
+static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+{
+	return &((struct adm5120_sw *)netdev_priv(dev))->stats;
+}
+
+static void adm5120_set_multicast_list(struct net_device *dev)
+{
+	struct adm5120_sw *priv = netdev_priv(dev);
+	int portmask;
+
+	portmask = vlan_matrix[priv->port] & 0x3f;
+
+	if (dev->flags & IFF_PROMISC)
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) &
+		    ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
+	else
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) |
+		    (portmask << ADM5120_DISUNSHIFT));
+
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+	    dev->mc_count)
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) &
+		    ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
+	else
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) |
+		    (portmask << ADM5120_DISMCSHIFT));
+}
+
+static void adm5120_write_mac(struct net_device *dev)
+{
+	struct adm5120_sw *priv = netdev_priv(dev);
+	unsigned char *mac = dev->dev_addr;
+
+	adm5120_set_reg(ADM5120_MAC_WT1,
+	    mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
+	adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
+	    (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+
+	while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+}
+
+static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	adm5120_write_mac(dev);
+	return 0;
+}
+
+static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	int err;
+	struct adm5120_sw_info info;
+	struct adm5120_sw *priv = netdev_priv(dev);
+
+	switch(cmd) {
+		case SIOCGADMINFO:
+			info.magic = 0x5120;
+			info.ports = adm5120_nrdevs;
+			info.vlan = priv->port;
+			err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+			if (err)
+				return -EFAULT;
+			break;
+		case SIOCSMATRIX:
+			if (!capable(CAP_NET_ADMIN))
+				return -EPERM;
+			err = copy_from_user(vlan_matrix, rq->ifr_data,
+			    sizeof(vlan_matrix));
+			if (err)
+				return -EFAULT;
+			adm5120_set_vlan(vlan_matrix);
+			break;
+		case SIOCGMATRIX:
+			err = copy_to_user(rq->ifr_data, vlan_matrix,
+			    sizeof(vlan_matrix));
+			if (err)
+				return -EFAULT;
+			break;
+		default:
+			return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+    int num)
+{
+	memset(dma, 0, sizeof(struct adm5120_dma)*num);
+	dma[num-1].data |= ADM5120_DMA_RINGEND;
+	memset(skb, 0, sizeof(struct skb*)*num);
+}
+
+static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+    int num)
+{
+	int i;
+
+	memset(dma, 0, sizeof(struct adm5120_dma)*num);
+	for (i=0; i<num; i++) {
+		skb[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+		if (!skb[i]) {
+			i=num;
+			break;
+		}
+		skb_reserve(skb[i], 2);
+		dma[i].data = ADM5120_DMA_ADDR(skb[i]->data) | ADM5120_DMA_OWN;
+		dma[i].cntl = 0;
+		dma[i].len = ADM5120_DMA_RXSIZE;
+		dma[i].status = 0;
+	}
+	dma[i-1].data |= ADM5120_DMA_RINGEND;
+}
+
+static int __init adm5120_sw_init(void)
+{
+	int i, err;
+	struct net_device *dev;
+
+	err = request_irq(SW_IRQ, adm5120_sw_irq, 0, "ethernet switch", NULL);
+	if (err)
+		goto out;
+
+	/* MII port? */
+	if (adm5120_get_reg(ADM5120_CODE) & ADM5120_CODE_PQFP)
+		adm5120_nrdevs = 5;
+	/* CFE based devices only have two enet ports */
+	else if (adm5120_info.boot_loader == BOOT_LOADER_CFE)
+		adm5120_nrdevs = 2;
+	else
+		adm5120_nrdevs = 6;
+
+	adm5120_set_reg(ADM5120_CPUP_CONF,
+	    ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
+	    ADM5120_DISUNALL | ADM5120_DISMCALL);
+	adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP);
+
+	adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
+	    ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
+	adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
+	    ADM5120_PHY_NTH);
+
+	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+	adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
+
+	adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
+	adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
+	adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
+	adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
+
+	adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
+	adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
+	adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
+	adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
+	adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
+	adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
+	adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
+	adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
+
+	adm5120_set_vlan(vlan_matrix);
+	
+	for (i=0; i<adm5120_nrdevs; i++) {
+		adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
+		if (!adm5120_devs[i]) {
+			err = -ENOMEM;
+			goto out_int;
+		}
+		
+		dev = adm5120_devs[i];
+		SET_MODULE_OWNER(dev);
+		memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
+		((struct adm5120_sw*)netdev_priv(dev))->port = i;
+		dev->base_addr = SW_BASE;
+		dev->irq = SW_IRQ;
+		dev->open = adm5120_sw_open;
+		dev->hard_start_xmit = adm5120_sw_tx;
+		dev->stop = adm5120_sw_stop;
+		dev->get_stats = adm5120_sw_stats;
+		dev->set_multicast_list = adm5120_set_multicast_list;
+		dev->do_ioctl = adm5120_do_ioctl;
+		dev->tx_timeout = adm5120_tx_timeout;
+		dev->watchdog_timeo = ETH_TX_TIMEOUT;
+		dev->set_mac_address = adm5120_sw_set_mac_address;
+		/* HACK alert!!!  In the original admtek driver it is asumed
+		   that you can read the MAC addressess from flash, but edimax
+		   decided to leave that space intentionally blank...
+		 */
+		memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
+		dev->dev_addr[5] += i;
+		adm5120_write_mac(dev);
+		
+		if ((err = register_netdev(dev))) {
+			free_netdev(dev);
+			goto out_int;
+		}
+		printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+	}
+	adm5120_set_reg(ADM5120_CPUP_CONF,
+	    ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+
+	return 0;
+
+out_int:
+	/* Undo everything that did succeed */
+	for (; i; i--) {
+		unregister_netdev(adm5120_devs[i-1]);
+		free_netdev(adm5120_devs[i-1]);
+	}
+	free_irq(SW_IRQ, NULL);
+out:
+	printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+	return err;
+}
+
+static void __exit adm5120_sw_exit(void)
+{
+	int i;
+
+	for (i = 0; i < adm5120_nrdevs; i++) {
+		unregister_netdev(adm5120_devs[i]);
+		free_netdev(adm5120_devs[i-1]);
+	}
+
+	free_irq(SW_IRQ, NULL);
+
+	for (i = 0; i < ADM5120_DMA_RXH; i++) {
+		if (!adm5120_skb_rxh[i])
+			break;
+		kfree_skb(adm5120_skb_rxh[i]);
+	}
+	for (i = 0; i < ADM5120_DMA_RXL; i++) {
+		if (!adm5120_skb_rxl[i])
+			break;
+		kfree_skb(adm5120_skb_rxl[i]);
+	}
+}
+
+module_init(adm5120_sw_init);
+module_exit(adm5120_sw_exit);
diff --git a/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h
new file mode 100644
index 0000000..19388a9
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/net/adm5120sw.h
@@ -0,0 +1,106 @@
+/*
+ *	Defines for ADM5120 built in ethernet switch driver
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ *	Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
+ *	Copyright ADMtek Inc.
+ */
+
+#ifndef _INCLUDE_ADM5120SW_H_
+#define _INCLUDE_ADM5120SW_H_
+
+#define SW_BASE	KSEG1ADDR(0x12000000)
+#define SW_DEVS	6
+#define SW_IRQ 	9
+
+#define ETH_TX_TIMEOUT	HZ/4
+#define ETH_FCS 4;
+
+#define ADM5120_CODE		0x00		/* CPU description */
+#define ADM5120_CODE_PQFP	0x20000000	/* package type */
+#define ADM5120_CPUP_CONF	0x24		/* CPU port config */
+#define ADM5120_DISCCPUPORT	0x00000001	/* disable cpu port */
+#define ADM5120_CRC_PADDING	0x00000002	/* software crc */
+#define ADM5120_DISUNSHIFT	9
+#define ADM5120_DISUNALL	0x00007e00	/* disable unknown from all */
+#define ADM5120_DISMCSHIFT	16
+#define ADM5120_DISMCALL	0x003f0000	/* disable multicast from all */
+#define ADM5120_PORT_CONF0	0x28
+#define ADM5120_ENMC		0x00003f00	/* Enable MC routing (ex cpu) */
+#define ADM5120_ENBP		0x003f0000	/* Enable Back Pressure */
+#define ADM5120_VLAN_GI		0x40		/* VLAN settings */
+#define ADM5120_VLAN_GII	0x44
+#define ADM5120_SEND_TRIG	0x48
+#define ADM5120_SEND_TRIG_L	0x00000001
+#define ADM5120_SEND_TRIG_H	0x00000002
+#define ADM5120_MAC_WT0		0x58
+#define ADM5120_MAC_WRITE	0x00000001
+#define ADM5120_MAC_WRITE_DONE	0x00000002
+#define ADM5120_VLAN_EN		0x00000040
+#define ADM5120_MAC_WT1		0x5c
+#define ADM5120_PHY_CNTL2	0x7c
+#define ADM5120_AUTONEG		0x0000001f	/* Auto negotiate */
+#define ADM5120_NORMAL		0x01f00000	/* PHY normal mode */
+#define ADM5120_AUTOMDIX	0x3e000000	/* Auto MDIX */
+#define ADM5120_PHY_CNTL3	0x80
+#define ADM5120_PHY_NTH		0x00000400
+#define ADM5120_INT_ST		0xb0
+#define ADM5120_INT_RXH		0x0000004
+#define ADM5120_INT_RXL		0x0000008
+#define ADM5120_INT_HFULL	0x0000010
+#define ADM5120_INT_LFULL	0x0000020
+#define ADM5120_INT_TXH		0x0000001
+#define ADM5120_INT_TXL		0x0000002
+#define ADM5120_INT_MASK	0xb4
+#define ADM5120_INTMASKALL	0x1FDEFFF	/* All interrupts */
+#define ADM5120_INTHANDLE	(ADM5120_INT_RXH | ADM5120_INT_RXL | \
+				 ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
+				 ADM5120_INT_TXH | ADM5120_INT_TXL)
+#define ADM5120_SEND_HBADDR	0xd0
+#define ADM5120_SEND_LBADDR	0xd4
+#define ADM5120_RECEIVE_HBADDR	0xd8
+#define ADM5120_RECEIVE_LBADDR	0xdc
+
+struct adm5120_dma {
+	u32 data;
+	u32 cntl;
+	u32 len;
+	u32 status;
+} __attribute__ ((packed));
+
+#define	ADM5120_DMA_MASK	0x01ffffff
+#define ADM5120_DMA_OWN		0x80000000	/* buffer owner */
+#define ADM5120_DMA_RINGEND	0x10000000	/* Last in DMA ring */
+
+#define ADM5120_DMA_ADDR(ptr)	((u32)(ptr) & ADM5120_DMA_MASK)
+#define ADM5120_DMA_PORTID	0x00007000
+#define ADM5120_DMA_PORTSHIFT	12
+#define ADM5120_DMA_LEN		0x07ff0000
+#define ADM5120_DMA_LENSHIFT	16
+#define ADM5120_DMA_FCSERR	0x00000008
+
+#define ADM5120_DMA_TXH		16
+#define ADM5120_DMA_TXL		64
+#define ADM5120_DMA_RXH		16
+#define ADM5120_DMA_RXL		8
+
+#define ADM5120_DMA_RXSIZE	1550
+#define ADM5120_DMA_EXTRA	20
+
+struct adm5120_sw {
+	int			port;
+	struct net_device_stats	stats;
+};
+
+#define SIOCSMATRIX	SIOCDEVPRIVATE
+#define SIOCGMATRIX	SIOCDEVPRIVATE+1
+#define SIOCGADMINFO	SIOCDEVPRIVATE+2
+
+struct adm5120_sw_info {
+	u16	magic;
+	u16	ports;
+	u16	vlan;
+};
+
+#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c b/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c
new file mode 100644
index 0000000..6b42928
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/serial/adm5120_uart.c
@@ -0,0 +1,524 @@
+/*
+ *	Serial driver for ADM5120 SoC
+ *
+ *	Derived from drivers/serial/uart00.c
+ *	Copyright 2001 Altera Corporation
+ *
+ *	Some pieces are derived from the ADMtek 2.4 serial driver.
+ *	Copyright (C) ADMtek Incorporated, 2003
+ *		daniell@admtek.com.tw
+ *	Which again was derived from drivers/char/serial.c
+ *	Copyright (C) Linus Torvalds et al.
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+
+#define ADM5120_UART_BASE0		0x12600000
+#define ADM5120_UART_BASE1		0x12800000
+#define ADM5120_UART_SIZE		0x20
+
+#define ADM5120_UART_IRQ0		1
+#define ADM5120_UART_IRQ1		2
+
+#define ADM5120_UART_REG(base, reg) \
+	(*(volatile u32 *)KSEG1ADDR((base)+(reg)))
+
+#define ADM5120_UARTCLK_FREQ            62500000
+#define ADM5120_UART_BAUDDIV(rate)	((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
+
+#define ADM5120_UART_BAUD115200		ADM5120_UART_BAUDDIV(115200)
+
+#define ADM5120_UART_DATA		0x00
+#define ADM5120_UART_RS			0x04
+#define ADM5120_UART_LCR_H		0x08
+#define ADM5120_UART_LCR_M		0x0c
+#define ADM5120_UART_LCR_L		0x10
+#define ADM5120_UART_CR			0x14
+#define ADM5120_UART_FR			0x18
+#define ADM5120_UART_IR			0x1c
+
+#define ADM5120_UART_FE			0x01
+#define ADM5120_UART_PE			0x02
+#define ADM5120_UART_BE			0x04
+#define ADM5120_UART_OE			0x08
+#define ADM5120_UART_ERR		0x0f
+#define ADM5120_UART_FIFO_EN		0x10
+#define ADM5120_UART_EN			0x01
+#define ADM5120_UART_TIE		0x20
+#define ADM5120_UART_RIE		0x50
+#define ADM5120_UART_IE			0x78
+#define ADM5120_UART_CTS		0x01
+#define ADM5120_UART_DSR		0x02
+#define ADM5120_UART_DCD		0x04
+#define ADM5120_UART_TXFF		0x20
+#define ADM5120_UART_TXFE		0x80
+#define ADM5120_UART_RXFE		0x10
+#define ADM5120_UART_BRK		0x01
+#define ADM5120_UART_PEN		0x02
+#define ADM5120_UART_EPS		0x04
+#define ADM5120_UART_STP2		0x08
+#define ADM5120_UART_W5			0x00
+#define ADM5120_UART_W6			0x20
+#define ADM5120_UART_W7			0x40
+#define ADM5120_UART_W8			0x60
+#define ADM5120_UART_MIS		0x01
+#define ADM5120_UART_RIS		0x02
+#define ADM5120_UART_TIS		0x04
+#define ADM5120_UART_RTIS		0x08
+
+static void adm5120ser_stop_tx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
+}
+
+static void adm5120ser_irq_rx(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned int status, ch, rds, flg, ignored = 0;
+
+	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	while (!(status & ADM5120_UART_RXFE)) {
+		/* 
+		 * We need to read rds before reading the 
+		 * character from the fifo
+		 */
+		rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
+		ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
+		port->icount.rx++;
+
+		if (tty->low_latency)
+			tty_flip_buffer_push(tty);
+
+		flg = TTY_NORMAL;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rds & ADM5120_UART_ERR)
+			goto handle_error;
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+	error_return:
+		tty_insert_flip_char(tty, ch, flg);
+
+	ignore_char:
+		status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	}
+ out:
+	tty_flip_buffer_push(tty);
+	return;
+
+ handle_error:
+ 	ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
+	if (rds & ADM5120_UART_BE) {
+		port->icount.brk++;
+		if (uart_handle_break(port))
+			goto ignore_char;
+	} else if (rds & ADM5120_UART_PE)
+		port->icount.parity++;
+	else if (rds & ADM5120_UART_FE)
+		port->icount.frame++;
+	if (rds & ADM5120_UART_OE)
+		port->icount.overrun++;
+
+	if (rds & port->ignore_status_mask) {
+		if (++ignored > 100)
+			goto out;
+		goto ignore_char;
+	}
+	rds &= port->read_status_mask;
+
+	if (rds & ADM5120_UART_BE)
+		flg = TTY_BREAK;
+	else if (rds & ADM5120_UART_PE)
+		flg = TTY_PARITY;
+	else if (rds & ADM5120_UART_FE)
+		flg = TTY_FRAME;
+
+	if (rds & ADM5120_UART_OE) {
+		/*
+		 * CHECK: does overrun affect the current character?
+		 * ASSUMPTION: it does not.
+		 */
+		tty_insert_flip_char(tty, ch, flg);
+		ch = 0;
+		flg = TTY_OVERRUN;
+	}
+#ifdef CONFIG_MAGIC_SYSRQ
+	port->sysrq = 0;
+#endif
+	goto error_return;
+}
+
+static void adm5120ser_irq_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	int count;
+
+	if (port->x_char) {
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+		    port->x_char;
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		adm5120ser_stop_tx(port);
+		return;
+	}
+
+	count = port->fifosize >> 1;
+	do {
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+		    xmit->buf[xmit->tail];
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		adm5120ser_stop_tx(port);
+}
+
+static void adm5120ser_irq_modem(struct uart_port *port)
+{
+	unsigned int status;
+
+	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+	if (status & ADM5120_UART_DCD)
+		uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
+
+	if (status & ADM5120_UART_DSR)
+		port->icount.dsr++;
+
+	if (status & ADM5120_UART_CTS)
+		uart_handle_cts_change(port, status & ADM5120_UART_CTS);
+
+	wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
+
+	if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
+		adm5120ser_irq_rx(port);
+	if (ir & ADM5120_UART_TIS)
+		adm5120ser_irq_tx(port);
+	if (ir & ADM5120_UART_MIS) {
+		adm5120ser_irq_modem(port);
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int adm5120ser_tx_empty(struct uart_port *port)
+{
+	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
+}
+
+static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
+{
+	unsigned int result = 0;
+	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+	if (fr & ADM5120_UART_CTS)
+		result |= TIOCM_CTS;
+	if (fr & ADM5120_UART_DSR)
+		result |= TIOCM_DSR;
+	if (fr & ADM5120_UART_DCD)
+		result |= TIOCM_CAR;
+	return result;
+}
+
+static void adm5120ser_start_tx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
+}
+
+static void adm5120ser_stop_rx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
+}
+
+static void adm5120ser_enable_ms(struct uart_port *port)
+{
+}
+
+static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+	unsigned long lcrh;
+
+	spin_lock_irqsave(&port->lock, flags);
+	lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
+	if (break_state == -1)
+		lcrh |= ADM5120_UART_BRK;
+	else
+		lcrh &= ~ADM5120_UART_BRK;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adm5120ser_startup(struct uart_port *port)
+{
+	int ret;
+
+	ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
+	if (ret) {
+		printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
+		return ret;
+	}
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
+	    ADM5120_UART_FIFO_EN;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
+	    ADM5120_UART_EN | ADM5120_UART_IE;
+	return 0;
+}
+
+static void adm5120ser_shutdown(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
+	free_irq(port->irq, port);
+}
+
+static void adm5120ser_set_termios(struct uart_port *port,
+    struct termios *termios, struct termios *old)
+{
+	unsigned int baud, quot, lcrh;
+	unsigned long flags;
+
+	termios->c_cflag |= CREAD;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	quot = uart_get_divisor(port, baud);
+
+	lcrh = ADM5120_UART_FIFO_EN;
+	switch (termios->c_cflag & CSIZE) {
+		case CS5:
+			lcrh |= ADM5120_UART_W5;
+			break;
+		case CS6:
+			lcrh |= ADM5120_UART_W6;
+			break;
+		case CS7:
+			lcrh |= ADM5120_UART_W7;
+			break;
+		default:
+			lcrh |= ADM5120_UART_W8;
+			break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		lcrh |= ADM5120_UART_STP2;
+	if (termios->c_cflag & PARENB) {
+		lcrh |= ADM5120_UART_PEN;
+		if (!(termios->c_cflag & PARODD))
+			lcrh |= ADM5120_UART_EPS;
+	}
+
+	spin_lock_irqsave(port->lock, flags);
+
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = ADM5120_UART_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= ADM5120_UART_BE;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= ADM5120_UART_BE;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns to (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= ADM5120_UART_OE;
+	}
+
+	quot = ADM5120_UART_BAUD115200;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *adm5120ser_type(struct uart_port *port)
+{
+	return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
+}
+
+static void adm5120ser_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_ADM5120;
+}
+
+static void adm5120ser_release_port(struct uart_port *port)
+{
+	release_mem_region(port->iobase, ADM5120_UART_SIZE);
+}
+
+static int adm5120ser_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->iobase, ADM5120_UART_SIZE,
+	    "adm5120-uart") != NULL ? 0 : -EBUSY; 
+}
+
+static struct uart_ops adm5120ser_ops = {
+	.tx_empty =	adm5120ser_tx_empty,
+	.set_mctrl =	adm5120ser_set_mctrl,
+	.get_mctrl =	adm5120ser_get_mctrl,
+	.stop_tx =	adm5120ser_stop_tx,
+	.start_tx =	adm5120ser_start_tx,
+	.stop_rx =	adm5120ser_stop_rx,
+	.enable_ms =	adm5120ser_enable_ms,
+	.break_ctl =	adm5120ser_break_ctl,
+	.startup =	adm5120ser_startup,
+	.shutdown =	adm5120ser_shutdown,
+	.set_termios =	adm5120ser_set_termios,
+	.type =		adm5120ser_type,
+	.config_port =	adm5120ser_config_port,
+	.release_port =	adm5120ser_release_port,
+	.request_port =	adm5120ser_request_port,
+};
+
+static void adm5120console_put(const char c)
+{
+	while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
+	     ADM5120_UART_TXFF) != 0);
+	ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
+}
+
+static void adm5120console_write(struct console *con, const char *s,
+    unsigned int count)
+{
+	while (count--) {
+		if (*s == '\n')
+			adm5120console_put('\r');
+		adm5120console_put(*s);
+		s++;
+	}
+}
+
+static int __init adm5120console_setup(struct console *con, char *options)
+{
+	/* Set to 115200 baud, 8N1 and enable FIFO */
+	ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
+	    ADM5120_UART_BAUD115200 & 0xff;
+	ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
+	    ADM5120_UART_BAUD115200 >> 8;
+	ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
+	    ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
+	/* Enable port */
+	ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
+	    ADM5120_UART_EN;
+
+	return 0;
+}
+
+static struct uart_driver adm5120ser_reg;
+
+static struct console adm5120_serconsole = {
+	.name =		"ttyS",
+	.write =	adm5120console_write,
+	.device =	uart_console_device,
+	.setup =	adm5120console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.cflag =	B115200 | CS8 | CREAD,
+	.index =	0,
+	.data =		&adm5120ser_reg,
+};
+
+static int __init adm5120console_init(void)
+{
+	register_console(&adm5120_serconsole);
+	return 0;
+}
+
+console_initcall(adm5120console_init);
+
+
+static struct uart_port adm5120ser_ports[] = {
+	{
+		.iobase =	ADM5120_UART_BASE0,
+		.irq =		ADM5120_UART_IRQ0,
+		.uartclk =	ADM5120_UARTCLK_FREQ,
+		.fifosize =	16,
+		.ops =		&adm5120ser_ops,
+		.line =		0,
+		.flags =	ASYNC_BOOT_AUTOCONF,
+	},
+#if (CONFIG_ADM5120_NR_UARTS > 1)
+	{
+		.iobase =	ADM5120_UART_BASE1,
+		.irq =		ADM5120_UART_IRQ1,
+		.uartclk =	ADM5120_UARTCLK_FREQ,
+		.fifosize =	16,
+		.ops =		&adm5120ser_ops,
+		.line =		1,
+		.flags =	ASYNC_BOOT_AUTOCONF,
+	},
+#endif
+};
+
+static struct uart_driver adm5120ser_reg = {
+	.owner	=	THIS_MODULE,
+	.driver_name =	"ttyS",
+	.dev_name =	"ttyS",
+	.major =	TTY_MAJOR,
+	.minor =	64,
+	.nr =		CONFIG_ADM5120_NR_UARTS,
+	.cons =		&adm5120_serconsole,
+};
+
+static int __init adm5120ser_init(void)
+{
+	int ret, i;
+
+	ret = uart_register_driver(&adm5120ser_reg);
+	if (!ret) {
+		for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
+			uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
+	}
+
+	return ret;
+}
+
+__initcall(adm5120ser_init);
diff --git a/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c b/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c
new file mode 100644
index 0000000..b4a1899
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/drivers/usb/host/adm5120-hcd.c
@@ -0,0 +1,790 @@
+/*
+ *	HCD driver for ADM5120 SoC
+ *
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ *	Based on the ADMtek 2.4 driver 
+ *	(C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
+ *	Which again was based on the ohci and uhci drivers.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+
+#include "../core/hcd.h"
+
+MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+
+#define ADMHCD_REG_CONTROL		0x00
+#define ADMHCD_REG_INTSTATUS		0x04
+#define ADMHCD_REG_INTENABLE		0x08
+#define ADMHCD_REG_HOSTCONTROL		0x10
+#define ADMHCD_REG_FMINTERVAL		0x18
+#define ADMHCD_REG_FMNUMBER		0x1c
+#define ADMHCD_REG_LSTHRESH		0x70
+#define ADMHCD_REG_RHDESCR		0x74
+#define ADMHCD_REG_PORTSTATUS0		0x78
+#define ADMHCD_REG_PORTSTATUS1		0x7c
+#define ADMHCD_REG_HOSTHEAD		0x80
+
+
+#define ADMHCD_NUMPORTS		2
+
+#define ADMHCD_HOST_EN		0x00000001	/* Host enable */
+#define ADMHCD_SW_INTREQ	0x00000002	/* request software int */
+#define ADMHCD_SW_RESET		0x00000008	/* Reset */
+
+#define ADMHCD_INT_TD		0x00100000	/* TD completed */
+#define ADMHCD_INT_SW		0x20000000	/* software interrupt */
+#define ADMHCD_INT_FATAL	0x40000000	/* Fatal interrupt */
+#define ADMHCD_INT_ACT		0x80000000	/* Interrupt active */
+
+#define ADMHCD_STATE_RST	0x00000000	/* bus state reset */
+#define ADMHCD_STATE_RES	0x00000001	/* bus state resume */
+#define ADMHCD_STATE_OP		0x00000002	/* bus state operational */
+#define ADMHCD_STATE_SUS	0x00000003	/* bus state suspended */
+#define ADMHCD_DMA_EN		0x00000004	/* enable dma engine */
+
+#define ADMHCD_NPS		0x00000020	/* No Power Switch */
+#define ADMHCD_LPSC		0x04000000	/* Local power switch change */
+
+#define ADMHCD_CCS		0x00000001	/* current connect status */
+#define ADMHCD_PES		0x00000002	/* port enable status */
+#define ADMHCD_PSS		0x00000004	/* port suspend status */
+#define ADMHCD_POCI		0x00000008	/* port overcurrent indicator */
+#define ADMHCD_PRS		0x00000010	/* port reset status */
+#define ADMHCD_PPS		0x00000100	/* port power status */
+#define ADMHCD_LSDA		0x00000200	/* low speed device attached */
+#define ADMHCD_CSC		0x00010000	/* connect status change */
+#define ADMHCD_PESC		0x00020000	/* enable status change */
+#define ADMHCD_PSSC		0x00040000	/* suspend status change */
+#define ADMHCD_OCIC		0x00080000	/* overcurrent change*/
+#define ADMHCD_PRSC		0x00100000	/* reset status change */
+
+
+struct admhcd_ed {
+	/* Don't change first four, they used for DMA */
+	u32				control;
+	struct admhcd_td		*tail;
+	struct admhcd_td		*head;
+	struct admhcd_ed		*next;
+	/* the rest is for the driver only: */
+	struct admhcd_td		*cur;
+	struct usb_host_endpoint 	*ep;
+	struct urb			*urb;
+	struct admhcd_ed		*real;
+} __attribute__ ((packed));
+
+#define ADMHCD_ED_EPSHIFT	7		/* Shift for endpoint number */
+#define ADMHCD_ED_INT		0x00000800	/* Is this an int endpoint */
+#define ADMHCD_ED_SPEED		0x00002000	/* Is it a high speed dev? */
+#define ADMHCD_ED_SKIP		0x00004000	/* Skip this ED */
+#define ADMHCD_ED_FORMAT	0x00008000	/* Is this an isoc endpoint */
+#define ADMHCD_ED_MAXSHIFT	16		/* Shift for max packet size */
+
+struct admhcd_td {
+	/* Don't change first four, they are used for DMA */
+	u32			control;
+	u32			buffer;
+	u32			buflen;
+	struct admhcd_td	*next;
+	/* the rest is for the driver only: */
+	struct urb		*urb;
+	struct admhcd_td	*real;
+} __attribute__ ((packed));
+
+#define ADMHCD_TD_OWN		0x80000000
+#define ADMHCD_TD_TOGGLE	0x00000000
+#define ADMHCD_TD_DATA0		0x01000000
+#define ADMHCD_TD_DATA1		0x01800000
+#define ADMHCD_TD_OUT		0x00200000
+#define ADMHCD_TD_IN		0x00400000
+#define ADMHCD_TD_SETUP		0x00000000
+#define ADMHCD_TD_ISO		0x00010000
+#define ADMHCD_TD_R		0x00040000
+#define ADMHCD_TD_INTEN		0x00010000
+
+static int admhcd_td_err[16] = {
+	0,		/* No */
+	-EREMOTEIO,		/* CRC */
+	-EREMOTEIO,	/* bit stuff */
+	-EREMOTEIO,		/* data toggle */
+	-EPIPE,		/* stall */
+	-ETIMEDOUT,	/* timeout */
+	-EPROTO,	/* pid err */
+	-EPROTO,	/* unexpected pid */
+	-EREMOTEIO,	/* data overrun */
+	-EREMOTEIO,	/* data underrun */
+	-ETIMEDOUT,	/* 1010 */
+	-ETIMEDOUT,	/* 1011 */
+	-EREMOTEIO,	/* buffer overrun */
+	-EREMOTEIO,	/* buffer underrun */
+	-ETIMEDOUT,	/* 1110 */
+	-ETIMEDOUT,	/* 1111 */
+};
+
+#define ADMHCD_TD_ERRMASK	0x38000000
+#define ADMHCD_TD_ERRSHIFT	27
+
+#define TD(td)	((struct admhcd_td *)(((u32)(td)) & ~0xf))
+#define ED(ed)	((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
+
+struct admhcd {
+	u32		base;
+	u32		dma_en;
+	spinlock_t	lock;
+	unsigned long	flags;
+};
+
+#define hcd_to_admhcd(hcd) ((struct admhcd *)(hcd)->hcd_priv)
+
+static char hcd_name[] = "adm5120-hcd";
+
+static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
+{
+	return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
+}
+
+static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
+{
+	*(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
+}
+
+static void admhcd_lock(struct admhcd *ahcd)
+{
+	spin_lock_irqsave(&ahcd->lock, ahcd->flags);
+	ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
+	    ADMHCD_DMA_EN;
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+}
+
+static void admhcd_unlock(struct admhcd *ahcd)
+{
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
+	    ADMHCD_STATE_OP | ahcd->dma_en);
+	spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
+}
+
+static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
+{
+	struct admhcd_td *tdn, *td;
+
+	tdn = kmalloc(sizeof(struct admhcd_td), GFP_ATOMIC);
+	if (!tdn)
+		return NULL;
+	tdn->real = tdn;
+	tdn = (struct admhcd_td *)KSEG1ADDR(tdn);
+	memset(tdn, 0, sizeof(struct admhcd_td));
+	if (ed->cur == NULL) {
+		ed->cur = tdn;
+		ed->head = tdn;
+		ed->tail = tdn;	
+		td = tdn;
+	} else {
+		/* Supply back the old tail and link in new td as tail */
+		td = TD(ed->tail);
+		TD(ed->tail)->next = tdn;
+		ed->tail = tdn;
+	}
+	td->urb = urb;
+
+	return td;
+}
+
+static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
+{
+	struct admhcd_td *td, **tdp;
+
+	if (urb == NULL)
+		ed->control |= ADMHCD_ED_SKIP;
+	tdp = &ed->cur;
+	td = ed->cur;
+	do {
+		if (td->urb == urb)
+			break;
+		tdp = &td->next;
+		td = TD(td->next);
+	} while (td);
+	while (td && td->urb == urb) {
+		*tdp = TD(td->next);
+		kfree(td->real);
+		td = *tdp;
+	}
+}
+
+/* Find an endpoint's descriptor, if needed allocate a new one and link it
+   in the DMA chain
+ */
+static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
+    struct usb_host_endpoint *ep, struct urb *urb)
+{
+	struct admhcd_ed *hosthead;
+	struct admhcd_ed *found = NULL, *ed = NULL;
+	unsigned int pipe = urb->pipe;
+
+	admhcd_lock(ahcd);
+	hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+	if (hosthead) {
+		for (ed = hosthead;; ed = ED(ed->next)) {
+			if (ed->ep == ep) {
+				found = ed;
+				break;
+			}
+			if (ED(ed->next) == hosthead)
+				break;
+		}
+	}
+	if (!found) {
+		found = kmalloc(sizeof(struct admhcd_ed), GFP_ATOMIC);
+		if (!found)
+			goto out;
+		memset(found, 0, sizeof(struct admhcd_ed));
+		found->real = found;
+		found->ep = ep;
+		found = (struct admhcd_ed *)KSEG1ADDR(found);
+		found->control = usb_pipedevice(pipe) |
+		    (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
+		    (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
+		    (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
+		    (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
+		    (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
+		/* Alloc first dummy td */
+		admhcd_td_alloc(found, NULL);
+		if (hosthead) {
+			found->next = hosthead;
+			ed->next = found;
+		} else {
+			found->next = found;
+			admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
+		}
+	}
+out:
+	admhcd_unlock(ahcd);
+	return found;
+}
+
+static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
+    dma_addr_t data, int len)
+{
+	td->buffer = data;
+	td->buflen = len;
+	td->control = control;
+	return TD(td->next);
+}
+
+static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
+{
+	struct admhcd_td *td = ed->cur;
+
+	if (ed->urb)
+		return;
+	if (td->urb) {
+		ed->urb = td->urb;
+		while (1) {
+			td->control |= ADMHCD_TD_OWN;
+			if (TD(td->next)->urb != td->urb) {
+				td->buflen |= ADMHCD_TD_INTEN;
+				break;
+			}
+			td = TD(td->next);
+		}
+	}
+	ed->head = TD(ed->head);
+	ahcd->dma_en |= ADMHCD_DMA_EN;
+}
+
+static irqreturn_t adm5120hcd_irq(int irq, void *ptr, struct pt_regs *regs)
+{
+	struct usb_hcd *hcd = (struct usb_hcd *)ptr;
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	u32 intstatus;
+
+	intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
+	if (intstatus & ADMHCD_INT_FATAL) {
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
+		//
+	}
+	if (intstatus & ADMHCD_INT_SW) {
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
+		//
+	}
+	if (intstatus & ADMHCD_INT_TD) {
+		struct admhcd_ed *ed, *head;
+		
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
+
+		head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+		ed = head;
+		if (ed) do {
+			/* Is it a finished TD? */
+			if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
+				struct admhcd_td *td;
+				int error;
+				
+				td = ed->cur;
+				error = (td->control & ADMHCD_TD_ERRMASK) >>
+				    ADMHCD_TD_ERRSHIFT;
+				ed->urb->status = admhcd_td_err[error];
+				admhcd_td_free(ed, ed->urb);
+				// Calculate real length!!!
+				ed->urb->actual_length = ed->urb->transfer_buffer_length;
+				ed->urb->hcpriv = NULL;
+				usb_hcd_giveback_urb(hcd, ed->urb);
+				ed->urb = NULL;
+			}
+			admhcd_ed_start(ahcd, ed);
+			ed = ED(ed->next);
+		} while (ed != head);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
+    struct urb *urb, int mem_flags)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed;
+	struct admhcd_td *td;
+	int size = 0, i, zero = 0, ret = 0;
+	unsigned int pipe = urb->pipe, toggle = 0;
+	dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
+	int data_len = urb->transfer_buffer_length;
+
+	ed = admhcd_get_ed(ahcd, ep, urb);
+	if (!ed)
+		return -ENOMEM;
+
+	switch(usb_pipetype(pipe)) {
+		case PIPE_CONTROL:
+			size = 2;
+		case PIPE_INTERRUPT:
+		case PIPE_BULK:
+		default:
+			size += urb->transfer_buffer_length / 4096;
+			if (urb->transfer_buffer_length % 4096)
+				size++;
+			if (size == 0)
+				size++;
+			else if (urb->transfer_flags & URB_ZERO_PACKET &&
+			    !(urb->transfer_buffer_length %
+			      usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
+				size++;
+				zero = 1;
+			}
+			break;
+		case PIPE_ISOCHRONOUS:
+			size = urb->number_of_packets;
+			break;
+	}
+
+	admhcd_lock(ahcd);
+	/* Remember the first td */
+	td = admhcd_td_alloc(ed, urb);
+	if (!td) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	/* Allocate additionall tds first */
+	for (i = 1; i < size; i++) {
+		if (admhcd_td_alloc(ed, urb) == NULL) {
+			admhcd_td_free(ed, urb);
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
+		toggle = ADMHCD_TD_TOGGLE;
+	else {
+		toggle = ADMHCD_TD_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
+		    usb_pipeout(pipe), 1);
+	}
+
+	switch(usb_pipetype(pipe)) {
+		case PIPE_CONTROL:
+			td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
+			    td, (dma_addr_t)urb->setup_packet, 8);
+			while (data_len > 0) {
+				td = admhcd_td_fill(ADMHCD_TD_DATA1 
+				    | ADMHCD_TD_R |
+				    (usb_pipeout(pipe) ?
+				    ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
+				    data, data_len % 4097);
+				data_len -= 4096;
+			}
+			admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
+			    ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
+			    data, 0);
+			break;
+		case PIPE_INTERRUPT:
+		case PIPE_BULK:
+			//info ok for interrupt?
+			i = 0;
+			while(data_len > 4096) {
+				td = admhcd_td_fill((usb_pipeout(pipe) ?
+				    ADMHCD_TD_OUT : 
+				    ADMHCD_TD_IN | ADMHCD_TD_R) |
+				    (i ? ADMHCD_TD_TOGGLE : toggle), td,
+				    data, 4096);
+				data += 4096;
+				data_len -= 4096;
+				i++;
+			}
+			td = admhcd_td_fill((usb_pipeout(pipe) ? 
+			    ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+			    (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
+			i++;
+			if (zero)
+				admhcd_td_fill((usb_pipeout(pipe) ?
+				    ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+				    (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
+			break;
+		case PIPE_ISOCHRONOUS:
+			for (i = 0; i < urb->number_of_packets; i++) {
+				td = admhcd_td_fill(ADMHCD_TD_ISO |
+				    ((urb->start_frame + i) & 0xffff), td,
+				    data + urb->iso_frame_desc[i].offset,
+				    urb->iso_frame_desc[i].length);
+			}
+			break;
+	}
+	urb->hcpriv = ed;
+	admhcd_ed_start(ahcd, ed);
+out:
+	admhcd_unlock(ahcd);
+	return ret;
+}
+
+static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed;
+
+	admhcd_lock(ahcd);
+
+	ed = urb->hcpriv;
+	if (ed && ed->urb != urb)
+		admhcd_td_free(ed, urb);
+
+	admhcd_unlock(ahcd);
+	return 0;
+}
+
+static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed, *edt, *head;
+
+	admhcd_lock(ahcd);
+
+	head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+	if (!head)
+		goto out;
+	for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
+		if (ed->ep == ep)
+			break;
+	if (ed->ep != ep)
+		goto out;
+	while (ed->cur)
+		admhcd_td_free(ed, ed->cur->urb);
+	if (head == ed) {
+		if (ED(ed->next) == ed) {
+			admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
+			ahcd->dma_en = 0;
+			goto out_free;
+		}
+		head = ED(ed->next);
+		for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
+		edt->next = ED(ed->next);
+		admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
+		goto out_free;
+	}
+	for (edt = head; edt->next != ed; edt = edt->next);
+	edt->next = ed->next;
+out_free:
+	kfree(ed->real);
+out:
+	admhcd_unlock(ahcd);
+}
+
+static int admhcd_get_frame_number(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+	return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
+}
+
+static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	int port;
+
+	*buf = 0;
+	for (port = 0; port < ADMHCD_NUMPORTS; port++) {
+		if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
+		    (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
+		     ADMHCD_PRSC))
+			*buf |= (1 << (port + 1));
+	}
+	return !!*buf;
+}
+
+static __u8 root_hub_hub_des[] = {
+	0x09,		/* __u8  bLength; */
+	0x29,		/* __u8  bDescriptorType; Hub-descriptor */
+	0x02,		/* __u8  bNbrPorts; */
+	0x0a, 0x00,	/* __u16 wHubCharacteristics; */
+	0x01,		/* __u8  bPwrOn2pwrGood; 2ms */
+	0x00,		/* __u8  bHubContrCurrent; 0mA */
+	0x00,		/* __u8  DeviceRemovable; */
+	0xff,		/* __u8  PortPwrCtrlMask; */
+};
+
+static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+    u16 wIndex, char *buf, u16 wLength)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	int retval = 0, len;
+	unsigned int port = wIndex -1;
+
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *)buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+		*(__le32 *)buf = cpu_to_le32(
+		    admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
+		break;
+	case SetHubFeature:		/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto err;
+		}
+	case SetPortFeature:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PSS);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
+			    & ADMHCD_CCS) {
+				admhcd_reg_set(ahcd, 
+				    ADMHCD_REG_PORTSTATUS0 + port*4,
+				    ADMHCD_PRS | ADMHCD_CSC);
+				mdelay(50);
+				admhcd_reg_set(ahcd,
+				    ADMHCD_REG_PORTSTATUS0 + port*4,
+				    ADMHCD_PES | ADMHCD_CSC);
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PPS);
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case ClearPortFeature:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_CCS);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PESC);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_POCI);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PSSC);
+		case USB_PORT_FEAT_POWER:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_LSDA);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_CSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_OCIC);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PRSC);
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case GetHubDescriptor:
+		len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+		memcpy(buf, root_hub_hub_des, len);
+		break;
+	default:
+err:
+		retval = -EPIPE;
+	}
+
+	return retval;
+}
+
+static struct hc_driver adm5120_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"ADM5120 HCD",
+	.hcd_priv_size =	sizeof(struct admhcd),
+	.flags =		HCD_USB11,
+	.urb_enqueue =		admhcd_urb_enqueue,
+	.urb_dequeue =		admhcd_urb_dequeue,
+	.endpoint_disable =	admhcd_endpoint_disable,
+	.get_frame_number =	admhcd_get_frame_number,
+	.hub_status_data =	admhcd_hub_status_data,
+	.hub_control =		admhcd_hub_control,
+};
+
+static int __init adm5120hcd_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct admhcd *ahcd;
+	struct usb_device *udev;
+	int err = 0;
+
+	if (!request_mem_region(pdev->resource[0].start,
+	    pdev->resource[0].end - pdev->resource[0].start, hcd_name)) {
+		pr_debug("couldn't request mem\n");
+		err = -EBUSY;
+		goto out;
+	}
+
+	//hcd = usb_create_hcd(&adm5120_hc_driver, pdev, pdev->bus_id);
+	if (!hcd)
+		goto out_mem;
+
+	ahcd = hcd_to_admhcd(hcd);
+	dev_set_drvdata(pdev, ahcd);
+	hcd->self.controller = pdev;
+	//hcd->self.bus_name = pdev->bus_id;
+	hcd->irq = pdev->resource[1].start;
+	hcd->regs = (void *)pdev->resource[0].start;
+	hcd->product_desc = hcd_name;
+	ahcd->base = pdev->resource[0].start;
+
+	if (request_irq(pdev->resource[1].start, adm5120hcd_irq, 0, hcd_name,
+	    hcd)) {
+		pr_debug("couldn't request irq\n");
+		err = -EBUSY;
+		goto out_hcd;
+	}
+
+	//err = usb_register_bus(&hcd->self);
+	//if (err < 0)
+	//	goto out_irq;
+
+	spin_lock_init(&ahcd->lock);
+
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+	mdelay(10);
+	admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+	while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)
+		mdelay(1);
+
+	admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
+	admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
+	admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE,
+	    ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS,
+	    ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+	admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+
+	udev = usb_alloc_dev(NULL, &hcd->self, 0);
+	if (!udev) {
+		err = -ENOMEM;
+		goto out_bus;
+	}
+
+	udev->speed = USB_SPEED_FULL;
+	hcd->state = HC_STATE_RUNNING;
+
+	//err = hcd_register_root(udev, hcd);
+	//if (err != 0) {
+	//	usb_put_dev(udev);
+	//	goto out_dev;
+	//}
+
+	return 0;
+
+out_dev:
+	usb_put_dev(udev);
+out_bus:
+	//usb_deregister_bus(&hcd->self);
+out_irq:
+	free_irq(pdev->resource[1].start, hcd);
+out_hcd:
+	usb_put_hcd(hcd);
+out_mem:
+	release_mem_region(pdev->resource[0].start,
+	    pdev->resource[0].end - pdev->resource[0].start);
+out:
+	return err;
+}
+
+static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+}
+
+static struct platform_driver adm5120hcd_driver = {
+	.probe =	adm5120hcd_probe,
+	.remove =	adm5120hcd_remove,
+	.driver	=	{
+		.name 	= "adm5120-hcd",
+		.owner 	= THIS_MODULE,
+	},
+};
+
+static int __init adm5120hcd_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return platform_driver_register(&adm5120hcd_driver);
+}
+
+static void __exit adm5120hcd_exit(void)
+{
+	platform_driver_unregister(&adm5120hcd_driver);
+}
+
+module_init(adm5120hcd_init);
+module_exit(adm5120hcd_exit);
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h
new file mode 100644
index 0000000..36979c2
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h
@@ -0,0 +1,60 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 SoC definitions
+ *
+ *  This file defines some constants specific to the ADM5120 SoC
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef _ADM5120_DEFS_H
+#define _ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE	0x00000000
+#define ADM5120_SDRAM1_BASE	0x01000000
+#define ADM5120_SRAM1_BASE	0x10000000
+#define ADM5120_MPMC_BASE	0x11000000
+#define ADM5120_USBC_BASE	0x11200000
+#define ADM5120_PCIMEM_BASE	0x11400000
+#define ADM5120_PCIIO_BASE	0x11500000
+#define ADM5120_PCICFG_ADDR	0x115FFFF0
+#define ADM5120_PCICFG_DATA	0x115FFFF8
+#define ADM5120_SWITCH_BASE	0x12000000
+#define ADM5120_INTC_BASE	0x12200000
+#define ADM5120_UART0_BASE	0x12600000
+#define ADM5120_UART1_BASE	0x12800000
+#define ADM5120_SRAM0_BASE	0x1FC00000
+
+#define ADM5120_MPMC_SIZE	0x1000
+#define ADM5120_USBC_SIZE	0x84
+#define ADM5120_PCIMEM_SIZE	(ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
+#define ADM5120_PCIIO_SIZE	(ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE)
+#define ADM5120_PCICFG_SIZE	0x10
+#define ADM5120_SWITCH_SIZE	0x114
+#define ADM5120_INTC_SIZE	0x28
+#define ADM5120_UART_SIZE	0x20
+
+#define ADM5120_CLK_175		175000000
+#define ADM5120_CLK_200		200000000
+#define ADM5120_CLK_225		225000000
+#define ADM5120_CLK_250		250000000
+
+#define ADM5120_UART_CLOCK	62500000
+
+#endif /* _ADM5120_DEFS_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
new file mode 100644
index 0000000..df1f24d
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
@@ -0,0 +1,70 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _ADM5120_INFO_H
+#define _ADM5120_INFO_H
+
+#include <linux/types.h>
+
+struct adm5120_info {
+	unsigned int product_code;
+	unsigned int revision;
+	unsigned int cpu_package;
+	unsigned int nand_boot;
+	unsigned long cpu_speed;
+	unsigned int boot_loader;
+	unsigned int board_type;
+	unsigned int num_iface;
+};
+
+#define CPU_SPEED_175		175000000
+#define CPU_SPEED_200		200000000
+#define CPU_SPEED_225		225000000
+#define CPU_SPEED_250		250000000
+
+#define CPU_PACKAGE_PQFP	0
+#define CPU_PACKAGE_BGA		1
+
+#define BOOT_LOADER_UNKNOWN	0
+#define BOOT_LOADER_CFE		1
+#define BOOT_LOADER_UBOOT	2
+#define BOOT_LOADER_MYLOADER	3
+#define BOOT_LOADER_ROUTERBOOT	4
+#define BOOT_LOADER_LAST	4	
+
+#define BOARD_TYPE_UNKNOWN	0
+#define BOARD_TYPE_WP54G_WRT	1
+#define BOARD_TYPE_WP54G	2
+#define BOARD_TYPE_WP54AG	3
+#define BOARD_TYPE_WPP54G	4
+#define BOARD_TYPE_WPP54AG	5
+#define BOARD_TYPE_NP28G	6
+#define BOARD_TYPE_NP28GHS	7
+#define BOARD_TYPE_NP27G	8
+#define BOARD_TYPE_WP54Gv1C	9
+#define BOARD_TYPE_RB_111	10
+#define BOARD_TYPE_RB_112	11
+#define BOARD_TYPE_RB_133	12
+#define BOARD_TYPE_RB_133C	13
+#define BOARD_TYPE_RB_150	14
+#define BOARD_TYPE_RB_153	15
+#define BOART_TYPE_LAST		15
+
+extern struct adm5120_info adm5120_info;
+extern void adm5120_info_init(void);
+
+static inline int adm5120_has_pci(void)
+{
+	return (adm5120_info.cpu_package == CPU_PACKAGE_BGA);
+}
+
+#endif /* _ADM5120_INFO_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h
new file mode 100644
index 0000000..52ea79e
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -0,0 +1,89 @@
+/*
+ *  ADM5120 ethernet switch definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in Ethernet switch.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_SWITCH_H
+#define _ADM5120_SWITCH_H
+
+#define BITMASK(len)	((1 << (len))-1)
+#define ONEBIT(at)	(1 << (at))
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE		0x0000
+#define SWITCH_REG_SOFT_RESET	0x0004
+#define SWITCH_REG_MEMCTRL	0x001C
+#define SWITCH_REG_CPUP_CONF	0x0024
+#define SWITCH_REG_PORT_CONF0	0x0028
+#define SWITCH_REG_PORT_CONF1	0x002C
+#define SWITCH_REG_PORT_CONF2	0x0030
+#define SWITCH_REG_VLAN_G1	0x0040
+#define SWITCH_REG_VLAN_G2	0x0044
+#define SWITCH_REG_SEND_TRIG	0x0048
+#define SWITCH_REG_MAC_WT0	0x0058
+#define SWITCH_REG_MAC_WT1	0x005C
+#define SWITCH_REG_PHY_CNTL0	0x0068
+#define SWITCH_REG_PHY_CNTL1	0x006C
+#define SWITCH_REG_PHY_CNTL2	0x007C
+#define SWITCH_REG_PHY_CNTL3	0x0080
+#define SWITCH_REG_PRI_CNTL	0x0084
+#define SWITCH_REG_INT_STATUS	0x00B0
+#define SWITCH_REG_INT_MASK	0x00B4
+#define SWITCH_REG_GPIO_CONF0	0x00B8
+#define SWITCH_REG_GPIO_CONF2	0x00BC
+#define SWITCH_REG_WDOG0	0x00C0
+#define SWITCH_REG_WDOG1	0x00C4
+#define SWITCH_REG_PHY_CNTL4	0x00A0
+
+#define SWITCH_REG_SEND_HBADDR	0x00D0
+#define SWITCH_REG_SEND_LBADDR	0x00D4
+#define SWITCH_REG_RECV_HBADDR	0x00D8
+#define SWITCH_REG_RECV_LBADDR	0x00DC
+
+#define SWITCH_REG_TIMER_INT	0x00F0
+#define SWITCH_REG_TIMER	0x00F4
+
+#define SWITCH_REG_PORT0_LED	0x0100
+#define SWITCH_REG_PORT1_LED	0x0104
+#define SWITCH_REG_PORT2_LED	0x0108
+#define SWITCH_REG_PORT3_LED	0x010C
+#define SWITCH_REG_PORT4_LED	0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK		BITMASK(16)	/* Product Code */
+#define CODE_REV_SHIFT		16
+#define CODE_REV_MASK		BITMASK(4)	/* Product Revision */
+#define CODE_CLKS_SHIFT		20
+#define CODE_CLKS_MASK		BITMASK(2)	/* Clock Speed */
+#define CODE_CLKS_175		0		/* 175 MHz */
+#define CODE_CLKS_200		1		/* 200 MHz */
+#define CODE_CLKS_225		2		/* 225 MHz */
+#define CODE_CLKS_250		3		/* 250 MHz */
+#define CODE_NAB		ONEBIT(24)	/* NAND boot */
+#define CODE_PK_MASK		BITMASK(1)	/* Package type */
+#define CODE_PK_SHIFT		29
+#define CODE_PK_BGA		0		/* BGA package */
+#define CODE_PK_PQFP		1		/* PQFP package */
+
+
+#endif /* _ADM5120_SWITCH_H */
diff --git a/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h
new file mode 100644
index 0000000..3c0c602
--- /dev/null
+++ b/target/linux/rb1xx-2.6/files/include/asm-mips/mach-adm5120/myloader.h
@@ -0,0 +1,167 @@
+/*
+ *  Copyright (C) 2006,2007 Gabor Juhos
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ *	<header>
+ *	[<block descriptor 0>]
+ *	...
+ *	[<block descriptor n>]
+ *	<null block descriptor>
+ *	[<block data 0>]
+ *	...
+ *	[<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE	0x4C594D00
+#define MYLO_MAGIC_20021103	0x20021103
+#define MYLO_MAGIC_20021107	0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS	MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS	MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS	MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS	0x80000800	/* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS	0x80000A00	/* Board Parameters */
+#define MYLO_MIPS_PARTITIONS	0x80000C00	/* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS	0x80000E00	/* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_fw_header {
+	uint32_t	magic;	/* must be MYLO_MAGIC_FIRMWARE */
+	uint32_t	crc;	/* CRC of the whole firmware */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint16_t	vid;	/* vendor ID */
+	uint16_t	did;	/* device ID */
+	uint16_t	svid;	/* sub vendor ID */
+	uint16_t	sdid;	/* sub device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;	/* FIXME: firmware version high? */
+	uint32_t	fwlo;	/* FIXME: firmware version low? */
+	uint32_t	flags;	/* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP	0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE	0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+	uint32_t	type;	/* block type */
+	uint32_t	addr;	/* relative address to flash start */
+	uint32_t	dlen;	/* size of block data in bytes */
+	uint32_t	blen;	/* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED	0
+#define FW_DESC_TYPE_USED	1
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;	/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint32_t 	res2;	/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;	/* length of the partition data */
+	uint32_t	crc;	/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;	/* Vendor ID */
+	uint16_t	did;	/* Device ID */
+	uint16_t	svid;	/* Sub Vendor ID */
+	uint16_t	sdid;	/* Sub Device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* Size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/rb1xx-2.6/image/Makefile b/target/linux/rb1xx-2.6/image/Makefile
new file mode 100644
index 0000000..e920a03
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/Makefile
@@ -0,0 +1,57 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+LOADADDR = 0x81000000		# RAM start + 16M 
+KERNEL_ENTRY = 0x80101000
+RAMSIZE = 0x00100000		# 1MB
+IMAGE_COPY = 1
+
+LOADER_MAKEOPTS= \
+		KDIR=$(KDIR) \
+		LOADADDR=$(LOADADDR) \
+		KERNEL_ENTRY=$(KERNEL_ENTRY) \
+		RAMSIZE=$(RAMSIZE) \
+		IMAGE_COPY=$(IMAGE_COPY)
+
+#define Build/Compile
+#	$(CC) -o $(STAGING_DIR)/bin/patch-cmdline $(PLATFORM_DIR)/src/patch-cmdline.c
+#endef
+
+define Build/Clean
+	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
+endef
+
+define Image/Prepare
+	cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+endef
+
+define Image/BuildKernel
+	$(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
+endef
+
+define Image/cmdline/jffs2-64k
+block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+endef
+
+define Image/cmdline/jffs2-128k
+block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+endef
+
+define Image/cmdline/ext2
+root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit
+endef
+
+define Image/Build
+	#$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
+	./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/rb1xx-2.6/image/gen_image.sh b/target/linux/rb1xx-2.6/image/gen_image.sh
new file mode 100755
index 0000000..e812859
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/gen_image.sh
@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+OUTPUT="$1"
+KERNELSIZE="$2"
+KERNELIMAGE="$3"
+ROOTFSSIZE="$4"
+ROOTFSIMAGE="$5"
+
+rm -f "$OUTPUT"
+
+# create partition table
+set `ptgen -o "$OUTPUT" -h 16 -s 32 -t 0x27 -p ${KERNELSIZE}m -t 0x83 -p ${ROOTFSSIZE}m`
+
+KERNELOFFSET="$(($1 / 512))"
+ROOTFSOFFSET="$(($2 / 512))"
+
+dd if="$KERNELIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$KERNELOFFSET"
+dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$ROOTFSOFFSET"
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/Makefile b/target/linux/rb1xx-2.6/image/lzma-loader/Makefile
new file mode 100644
index 0000000..e2afb18
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/Makefile
@@ -0,0 +1,34 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id: Makefile 4439 2006-08-04 17:14:36Z nbd $
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+		LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download: 
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+	$(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000..951700b
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,663 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder
+  
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  int Result;
+  #endif
+  int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+  if (rd->Buffer == rd->BufferLim)
+  {
+    #ifdef _LZMA_IN_CB
+    UInt32 size;
+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+    rd->BufferLim = rd->Buffer + size;
+    if (size == 0)
+    #endif
+    {
+      rd->ExtraBytes = 1;
+      return 0xFF;
+    }
+  }
+  return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    Byte *stream, UInt32 bufferSize
+  #endif
+    )
+{
+  int i;
+  #ifdef _LZMA_IN_CB
+  rd->InCallback = inCallback;
+  rd->Buffer = rd->BufferLim = 0;
+  #else
+  rd->Buffer = stream;
+  rd->BufferLim = stream + bufferSize;
+  #endif
+  rd->ExtraBytes = 0;
+  rd->Code = 0;
+  rd->Range = (0xFFFFFFFF);
+  for(i = 0; i < 5; i++)
+    rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+  RC_INIT_VAR
+  UInt32 result = 0;
+  int i;
+  for (i = numTotalBits; i > 0; i--)
+  {
+    /* UInt32 t; */
+    range >>= 1;
+
+    result <<= 1;
+    if (code >= range)
+    {
+      code -= range;
+      result |= 1;
+    }
+    /*
+    t = (code - range) >> 31;
+    t &= 1;
+    code -= range & (t - 1);
+    result = (result + result) | (1 - t);
+    */
+    RC_NORMALIZE
+  }
+  RC_FLUSH_VAR
+  return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+  if (rd->Code < bound)
+  {
+    rd->Range = bound;
+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 0;
+  }
+  else
+  {
+    rd->Range -= bound;
+    rd->Code -= bound;
+    *prob -= (*prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 1;
+  }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+  if (code < bound) \
+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+  else \
+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+  RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = numLevels; i > 0; i--)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT(prob, mi)
+    #else
+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  int symbol = 0;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = 0; i < numLevels; i++)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+    #else
+    int bit = RangeDecoderBitDecode(probs + mi, rd);
+    mi = mi + mi + bit;
+    symbol |= (bit << i);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + symbol;
+    RC_GET_BIT(prob, symbol)
+    #else
+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+    #endif
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    int bit;
+    int matchBit = (matchByte >> 7) & 1;
+    matchByte <<= 1;
+    #ifdef _LZMA_LOC_OPT
+    {
+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+    }
+    #else
+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+    symbol = (symbol << 1) | bit;
+    #endif
+    if (matchBit != bit)
+    {
+      while (symbol < 0x100)
+      {
+        #ifdef _LZMA_LOC_OPT
+        CProb *prob = probs + symbol;
+        RC_GET_BIT(prob, symbol)
+        #else
+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+        #endif
+      }
+      break;
+    }
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+    return RangeDecoderBitTreeDecode(p + LenLow +
+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
+  return kLenNumLowSymbols + kLenNumMidSymbols + 
+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  CRangeDecoder RangeDecoder;
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int PreviousIsMatch;
+  int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->PreviousIsMatch = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&vs->RangeDecoder, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+  );
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  CRangeDecoder rd = vs->RangeDecoder;
+  int state = vs->State;
+  int previousIsMatch = vs->PreviousIsMatch;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len > 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+  CRangeDecoder rd;
+  UInt32 i;
+  int state = 0;
+  int previousIsMatch = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&rd, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+      );
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+    #ifdef _LZMA_IN_CB
+    if (rd.Result != LZMA_RESULT_OK)
+      return rd.Result;
+    #endif
+    if (rd.ExtraBytes != 0)
+      return LZMA_RESULT_DATA_ERROR;
+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+    {
+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+      if (previousIsMatch)
+      {
+        Byte matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+        previousIsMatch = 0;
+      }
+      else
+        previousByte = LzmaLiteralDecode(probs, &rd);
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+    }
+    else             
+    {
+      previousIsMatch = 1;
+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+      {
+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+        {
+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            if (
+               (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+               )
+               == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < 7 ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+            distance = rep1;
+          else 
+          {
+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+              distance = rep2;
+            else
+            {
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+        state = state < 7 ? 8 : 11;
+      }
+      else
+      {
+        int posSlot;
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < 7 ? 7 : 10;
+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits), kNumPosSlotBits, &rd);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 += RangeDecoderReverseBitTreeDecode(
+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+          }
+          else
+          {
+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
+                numDirectBits - kNumAlignBits) << kNumAlignBits;
+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+          }
+        }
+        else
+          rep0 = posSlot;
+        rep0++;
+      }
+      if (rep0 == (UInt32)(0))
+      {
+        /* it's for stream version */
+        len = -1;
+        break;
+      }
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+      {
+        return LZMA_RESULT_DATA_ERROR;
+      }
+      len += kMatchMinLen;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        outStream[nowPos++] = previousByte;
+        len--;
+      }
+      while(len > 0 && nowPos < outSize);
+    }
+  }
+
+  #ifdef _LZMA_OUT_READ
+  vs->RangeDecoder = rd;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->PreviousIsMatch = previousIsMatch;
+  vs->RemainLen = len;
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000..f58944e
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/Makefile b/target/linux/rb1xx-2.6/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000..85a8646
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/Makefile
@@ -0,0 +1,77 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START	:= 0x80001000
+BZ_TEXT_START	:= 0x80300000
+
+OBJCOPY		:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+		  -ffunction-sections -pipe -mlong-calls -fno-common \
+		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS		+= -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS	:= s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS		:= head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+	gzip -nc9 $< > $@
+
+loader.elf: loader.o
+	cp $< $@
+
+loader: loader.o
+	$(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+	$(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+	$(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+	@echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+	$(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+	$(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+	rm -f loader.gz loader decompress *.lds *.o *.image
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/README b/target/linux/rb1xx-2.6/image/lzma-loader/src/README
new file mode 100644
index 0000000..16649e9
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+	0.02	Initial release
+	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+		output size to decoder (stream mode compressed input is not 
+		a requirement anymore)
+	0.04	Reordered functions using lds script
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.c b/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000..d361024
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.c
@@ -0,0 +1,239 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ * 24-Mar-2007 Gabor Juhos
+ *   pass original values of the a0,a1,a2,a3 registers to the kernel
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH		0x1fc00000	/* Flash */
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:						\
+		: "r" (base),			\
+		  "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+
+struct trx_header {
+	unsigned int magic;		/* "HDR0" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned int offsets[3];	/* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3);
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	static unsigned int val;
+
+	if (((unsigned int)offset % 4) == 0) {
+		val = *(unsigned int *)data;
+		data += 4;
+	}
+	
+	*bufferSize = 1;
+	*buffer = ((unsigned char *)&val) + (offset++ & 3);
+	
+	return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+	unsigned char *buffer;
+	UInt32 fake;
+	
+	return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3,
+	unsigned long icache_size, unsigned long icache_lsize, 
+	unsigned long dcache_size, unsigned long dcache_lsize)
+{
+	unsigned int i;  /* temp value */
+	unsigned int lc; /* literal context bits */
+	unsigned int lp; /* literal pos state bits */
+	unsigned int pb; /* pos state bits */
+	unsigned int osize; /* uncompressed size */
+
+	ILzmaInCallback callback;
+	callback.Read = read_byte;
+
+    uart_write_str("decompress kernel ... ");
+    
+	/* look for trx header, 32-bit data access */
+	for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+		((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+	/* compressed kernel is in the partition 0 or 1 */
+	if (((struct trx_header *)data)->offsets[1] > 65536) 
+		data += ((struct trx_header *)data)->offsets[0];
+	else
+		data += ((struct trx_header *)data)->offsets[1];
+
+	offset = 0;
+
+	/* lzma args */
+	i = get_byte();
+	lc = i % 9, i = i / 9;
+	lp = i % 5, pb = i / 5;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++) 
+		get_byte();
+
+	/* decompress kernel */
+	if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+		(unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+	{
+		blast_dcache(dcache_size, dcache_lsize);
+		blast_icache(icache_size, icache_lsize);
+
+		/* Jump to load address */
+        uart_write_str("ok\r\n");
+		((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
+	}
+    uart_write_str("failed\r\n");
+    while (1 );
+}
+
+/*  *********************************************************************
+    *  
+    *  ADM5120 UART driver			File: dev_adm_uart.c
+    *  
+    *  This is a console device driver for an ADM5120 UART
+    *  
+    *********************************************************************
+    *
+    *  Copyright 2006
+    *  Compex Systems. All rights reserved.
+    *
+    ********************************************************************* */
+
+#define READCSR(r)      *(volatile UInt32 *)(0xB2600000+(r))
+#define WRITECSR(r,v)   *(volatile UInt32 *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG         0x00
+#define UART_FR_REG         0x18
+#define UART_TX_FIFO_FULL   0x20
+
+int uart_write(int val)
+{
+	WRITECSR(UART_DR_REG, val);
+    while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+    return 0;
+}
+
+int uart_write_str(char * str)
+{
+    while ( *str != 0 ) {
+        uart_write ( *str++ );
+    }
+    return 0;
+}
+
+int uart_write_hex(int val)
+{
+    int i;
+    int tmp;
+    
+    uart_write_str("0x");
+    for ( i=0 ; i<8 ; i++ ) {
+        tmp = (val >> ((7-i) * 4 )) & 0xf;
+        tmp = tmp < 10 ? (tmp + '0') : (tmp + 'A' - 10);
+        uart_write(tmp);
+    }
+    uart_write_str("\r\n");
+    return 0;
+}
+
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.lds.in b/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.lds.in
new file mode 100644
index 0000000..33f56f8
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/decompress.lds.in
@@ -0,0 +1,20 @@
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+	. = BZ_TEXT_START;
+	.text : {
+		*(.text.entry)
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+
+	workspace = .;
+}
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/head.S b/target/linux/rb1xx-2.6/image/lzma-loader/src/head.S
new file mode 100644
index 0000000..7f0e9ad
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/head.S
@@ -0,0 +1,166 @@
+/* Copyright 2007 Gabor Juhos				*/
+/* keep original values of the a0,a1,a2,a3 registers	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* idea taken from original bunzip2 decompressor code	*/
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_CONFIG	$16
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+	.text
+	LEAF(startup)
+	.set noreorder
+	
+	/* Copy decompressor code to the right place */
+	li	t0, BZ_TEXT_START
+
+	la      t1, code_start
+	la	t2, code_stop
+$L1:
+	lw	t3, 0(t1)
+	sw	t3, 0(t0)
+	add	t1, 4
+	blt	t1, t2, $L1
+	add	t0, 4
+
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	.set	mips32
+	mfc0	s0,C0_CONFIG,1
+	.set	mips0
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s1
+	
+nodc:
+	/* Now we get to do it all again for the I$ */
+	
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Invalidate_I,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s3
+
+noic:
+	li	t0, BZ_TEXT_START
+	
+	addiu	sp, -32			/* reserve stack for parameters */
+#if 0	
+	sw	a0, 0(sp)
+	sw	a1, 4(sp)
+	sw	a2, 8(sp)
+	sw	a3, 12(sp)
+#endif	
+	sw	s3, 16(sp)		/* icache line size */
+	sw	s4, 20(sp)		/* icache size */
+	sw	s1, 24(sp)		/* dcache line size */
+	jr	t0
+	sw	s2, 28(sp)		/* dcache size */
+	
+	.set reorder
+	END(startup)
diff --git a/target/linux/rb1xx-2.6/image/lzma-loader/src/loader.lds.in b/target/linux/rb1xx-2.6/image/lzma-loader/src/loader.lds.in
new file mode 100644
index 0000000..20f2ea9
--- /dev/null
+++ b/target/linux/rb1xx-2.6/image/lzma-loader/src/loader.lds.in
@@ -0,0 +1,17 @@
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+	. = TEXT_START;
+	.text : {
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+}
diff --git a/target/linux/rb1xx-2.6/patches/001-adm5120.patch b/target/linux/rb1xx-2.6/patches/001-adm5120.patch
new file mode 100644
index 0000000..ed7a307
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/001-adm5120.patch
@@ -0,0 +1,64 @@
+diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
+--- linux-2.6.19.2/arch/mips/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Kconfig	2007-01-23 14:49:38.000000000 +0100
+@@ -12,6 +12,18 @@
+ 	prompt "System type"
+ 	default SGI_IP22
+ 
++config MIPS_ADM5120
++	bool "Support for ADM5120 SoC"
++	select SYS_HAS_CPU_MIPS32_R1
++	select DMA_NONCOHERENT
++	select HW_HAS_PCI
++	select SYS_SUPPORTS_LITTLE_ENDIAN
++	select SYS_SUPPORTS_32BIT_KERNEL
++
++config PCI_ADM5120
++	bool "Add PCI control support for ADM5120"
++	depends on MIPS_ADM5120 && PCI
++
+ config MIPS_MTX1
+ 	bool "4G Systems MTX-1 board"
+ 	select DMA_NONCOHERENT
+diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
+--- linux-2.6.19.2/arch/mips/Makefile	2007-01-23 14:02:57.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Makefile	2007-01-23 14:49:39.000000000 +0100
+@@ -165,6 +165,14 @@
+ load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
+ 
+ #
++# ADMtek 5120
++#
++
++core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
++cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
++load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80101000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
+diff -urN linux-2.6.19.2/arch/mips/pci/Makefile linux-2.6.19.2.new/arch/mips/pci/Makefile
+--- linux-2.6.19.2/arch/mips/pci/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/pci/Makefile	2007-01-23 14:49:40.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120)	+= ops-adm5120.o pci-adm5120.o
+diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
+--- linux-2.6.19.2/include/asm-mips/bootinfo.h	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h	2007-01-23 14:49:40.000000000 +0100
+@@ -212,6 +212,12 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
+ #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
+ 
++/*
++ * Valid machtype for group ADMtek
++ */
++#define MACH_GROUP_ADM_GW      23
++#define MACH_ADM_GW_5120	0
++
+ #define CL_SIZE			COMMAND_LINE_SIZE
+ 
+ const char *get_system_type(void);
diff --git a/target/linux/rb1xx-2.6/patches/002-adm5120_flash.patch b/target/linux/rb1xx-2.6/patches/002-adm5120_flash.patch
new file mode 100644
index 0000000..503a495
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/002-adm5120_flash.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
+--- linux-2.6.19.2/drivers/mtd/maps/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig	2007-01-23 01:13:39.000000000 +0100
+@@ -622,5 +622,10 @@
+ 
+ 	  This selection automatically selects the map_ram driver.
+ 
++config MTD_ADM5120
++	tristate "Map driver for ADMtek ADM5120 boards"
++	depends on MIPS_ADM5120
++	select MTD_CFI_AMDSTD
++
+ endmenu
+ 
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
+--- linux-2.6.19.2/drivers/mtd/maps/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile	2007-01-23 01:20:52.000000000 +0100
+@@ -43,6 +43,7 @@
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)		+= pci.o
+ obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120)      	+= adm5120_mtd.o
+ obj-$(CONFIG_MTD_LASAT)		+= lasat.o
+ obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/rb1xx-2.6/patches/003-adm5120_switch.patch b/target/linux/rb1xx-2.6/patches/003-adm5120_switch.patch
new file mode 100644
index 0000000..f6fec30
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/003-adm5120_switch.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
+--- linux-2.6.19.2/drivers/net/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Kconfig	2007-01-23 01:13:39.000000000 +0100
+@@ -450,6 +450,10 @@
+ 	  If you have an Alchemy Semi AU1X00 based system
+ 	  say Y.  Otherwise, say N.
+ 
++config MIPS_ADM5120_ENET
++	tristate "MIPS ADM5120 Ethernet switch support"
++	depends on NET_ETHERNET && MIPS_ADM5120
++
+ config NET_SB1250_MAC
+ 	tristate "SB1250 Ethernet support"
+ 	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
+--- linux-2.6.19.2/drivers/net/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Makefile	2007-01-23 01:13:39.000000000 +0100
+@@ -164,6 +164,7 @@
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+ 
++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/rb1xx-2.6/patches/004-adm5120_uart.patch b/target/linux/rb1xx-2.6/patches/004-adm5120_uart.patch
new file mode 100644
index 0000000..6f2ef7b
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/004-adm5120_uart.patch
@@ -0,0 +1,50 @@
+diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
+--- linux-2.6.19.2/drivers/serial/Kconfig       2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig       2007-01-23 01:13:39.000000000 +0100
+@@ -246,6 +246,22 @@
+
+ comment "Non-8250 serial port support"
+
++config SERIAL_ADM5120
++       bool "ADM5120 serial port support"
++       depends on MIPS_ADM5120
++       select SERIAL_CORE
++       select SERIAL_CORE_CONSOLE
++       help
++         Driver for the on chip UARTs on the ADM5120 SoC
++
++config ADM5120_NR_UARTS
++       int "Maximum number of ADM5120 serial ports"
++       depends on SERIAL_ADM5120
++       default "2"
++       ---help---
++         Set this to the number of serial ports you want the driver to
++         support.
++
+ config SERIAL_AMBA_PL010
+        tristate "ARM AMBA PL010 serial port support"
+        depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
+diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
+--- linux-2.6.19.2/drivers/serial/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Makefile	2007-01-23 01:21:45.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
+--- linux-2.6.19.2/include/linux/serial_core.h	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/include/linux/serial_core.h	2007-01-23 01:13:39.000000000 +0100
+@@ -133,6 +133,9 @@
+ #define PORT_S3C2412	73
+ 
+ 
++/* ADMtek ADM5120 SoC */
++#define PORT_ADM5120	68
++
+ #ifdef __KERNEL__
+ 
+ #include <linux/compiler.h>
diff --git a/target/linux/rb1xx-2.6/patches/005-adm5120_usb.patch b/target/linux/rb1xx-2.6/patches/005-adm5120_usb.patch
new file mode 100644
index 0000000..40e4fbe
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/005-adm5120_usb.patch
@@ -0,0 +1,53 @@
+diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
+--- linux-2.6.19.2/drivers/usb/core/hub.c	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c	2007-01-23 01:13:39.000000000 +0100
+@@ -2156,6 +2156,8 @@
+ 					USB_DT_DEVICE << 8, 0,
+ 					buf, GET_DESCRIPTOR_BUFSIZE,
+ 					(i ? USB_CTRL_GET_TIMEOUT : 1000));
++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
++buf->bDescriptorType, USB_DT_DEVICE);
+ 				switch (buf->bMaxPacketSize0) {
+ 				case 8: case 16: case 32: case 64: case 255:
+ 					if (buf->bDescriptorType ==
+diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
+--- linux-2.6.19.2/drivers/usb/host/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig	2007-01-23 01:13:39.000000000 +0100
+@@ -192,3 +192,6 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called "sl811_cs".
+ 
++config USB_ADM5120_HCD
++	tristate "ADM5120 HCD support"
++	depends on USB && MIPS_ADM5120
+diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
+--- linux-2.6.19.2/drivers/usb/host/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile	2007-01-23 01:13:39.000000000 +0100
+@@ -16,3 +16,4 @@
+ obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
+ obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
+ obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
++obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
+diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
+--- linux-2.6.19.2/drivers/usb/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig	2007-01-23 01:13:39.000000000 +0100
+@@ -91,8 +91,6 @@
+ 
+ source "drivers/usb/net/Kconfig"
+ 
+-source "drivers/usb/mon/Kconfig"
+-
+ comment "USB port drivers"
+ 	depends on USB
+ 
+diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
+--- linux-2.6.19.2/drivers/usb/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Makefile	2007-01-23 01:22:18.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_USB_U132_HCD)	+= host/
+ obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
+ obj-$(CONFIG_USB_OHCI_AT91)	+= host/
++obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
+ 
+ obj-$(CONFIG_USB_ACM)		+= class/
+ obj-$(CONFIG_USB_PRINTER)	+= class/
diff --git a/target/linux/rb1xx-2.6/patches/006-adm5120_gpio.patch b/target/linux/rb1xx-2.6/patches/006-adm5120_gpio.patch
new file mode 100644
index 0000000..593743d
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/006-adm5120_gpio.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
+--- linux-2.6.19.2/drivers/char/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Kconfig	2007-01-23 01:13:39.000000000 +0100
+@@ -1034,7 +1034,9 @@
+ 	  The mmtimer device allows direct userspace access to the
+ 	  Altix system timer.
+ 
+-source "drivers/char/tpm/Kconfig"
++config ADM5120_GPIO
++	tristate "ADM5120 GPIO"
++	depends on MIPS_ADM5120
+ 
+ config TELCLOCK
+ 	tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
+--- linux-2.6.19.2/drivers/char/Makefile	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Makefile	2007-01-23 01:20:01.000000000 +0100
+@@ -90,6 +90,7 @@
+ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
++obj-$(CONFIG_ADM5120_GPIO) 	+= adm5120_gpio.o
+ 
+ obj-$(CONFIG_WATCHDOG)		+= watchdog/
+ obj-$(CONFIG_MWAVE)		+= mwave/
diff --git a/target/linux/rb1xx-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/rb1xx-2.6/patches/100-mtd-myloder-partition-parser.patch
new file mode 100644
index 0000000..81ec37d
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/100-mtd-myloder-partition-parser.patch
@@ -0,0 +1,37 @@
+diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
+--- linux-2.6.19.2/drivers/mtd/Kconfig.old	2007-03-25 08:13:02.000000000 +0200
++++ linux-2.6.19.2/drivers/mtd/Kconfig	2007-03-26 13:37:47.000000000 +0200
+@@ -157,6 +157,22 @@
+ 	  for your particular device. It won't happen automatically. The
+ 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MIPS_ADM5120 && MTD_PARTITIONS
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 	depends on MTD
+ 
+diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
+--- linux-2.6.19.2/drivers/mtd/Makefile.old	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2/drivers/mtd/Makefile	2007-03-26 13:28:23.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/rb1xx-2.6/patches/101-mtd-mxflash.patch b/target/linux/rb1xx-2.6/patches/101-mtd-mxflash.patch
new file mode 100755
index 0000000..754a91e
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/101-mtd-mxflash.patch
@@ -0,0 +1,31 @@
+--- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old	2007-01-11 03:10:36.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/Kconfig	2007-03-29 14:43:32.000000000 +0800
+@@ -199,6 +199,14 @@
+ 	  provides support for one of those command sets, used on chips
+ 	  including the AMD Am29LV320.
+ 
++config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++	bool "Force bottom boot for Macronix flash chips"
++	depends on MTD_CFI_AMDSTD
++	help
++	  Some Macronix flash chips have wrong CFI info, and the driver may
++	  detect the type incorrectly. Select this if the chip part number
++	  ends with BTC.
++
+ config MTD_CFI_STAA
+ 	tristate "Support for ST (Advanced Architecture) flash chips"
+ 	depends on MTD_GEN_PROBE
+--- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old	2007-03-22 16:14:56.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c	2007-03-29 14:07:28.000000000 +0800
+@@ -320,6 +320,11 @@
+ 		cfi_tell_features(extp);
+ #endif
+ 
++#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++		extp->TopBottom = 2;
++		bootloc = extp->TopBottom;
++#endif
++
+ 		bootloc = extp->TopBottom;
+ 		if ((bootloc != 2) && (bootloc != 3)) {
+ 			printk(KERN_WARNING "%s: CFI does not contain boot "
diff --git a/target/linux/rb1xx-2.6/patches/120-cf.patch b/target/linux/rb1xx-2.6/patches/120-cf.patch
new file mode 100644
index 0000000..a22c526
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/120-cf.patch
@@ -0,0 +1,1011 @@
+diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
+--- linux.old/drivers/block/Kconfig	2006-10-26 02:43:39.000000000 +0200
++++ linux.dev/drivers/block/Kconfig	2006-10-26 00:11:14.000000000 +0200
+@@ -456,4 +456,12 @@
+ 	This driver provides Support for ATA over Ethernet block
+ 	devices like the Coraid EtherDrive (R) Storage Blade.
+ 
++config BLK_DEV_CF_MIPS
++	bool "CF slot of RB532 board"
++	depends on MIKROTIK_RB500 || MIPS_ADM5120
++	default y
++	help
++	  The Routerboard 532 has a CF slot on it. Enable the special block
++	  device driver for it.
++
+ endmenu
+diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
+--- linux.old/drivers/block/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/drivers/block/Makefile	2006-10-26 02:44:10.000000000 +0200
+@@ -29,4 +29,5 @@
+ obj-$(CONFIG_VIODASD)		+= viodasd.o
+ obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
+ obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
++obj-$(CONFIG_BLK_DEV_CF_MIPS)	+= rb500/
+ 
+diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.c
+--- linux.old/drivers/block/rb500/ata.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/ata.c	2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,485 @@
++/* CF-mips driver
++   This is a block driver for the direct (mmaped) interface to the CF-slot,
++   found in Routerboard.com's RB532 board
++   See SDK provided from routerboard.com.
++   
++   Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++   Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++   This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#include <linux/kernel.h>	/* printk() */
++#include <linux/module.h>	/* module to be loadable */
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/pci.h>
++#include <linux/ioport.h>	/* request_mem_region() */
++#include <asm/unaligned.h>		/* ioremap() */
++#include <asm/io.h>		/* ioremap() */
++#include <asm/rc32434/rb.h>
++
++#include "ata.h"
++
++#define REQUEST_MEM_REGION 0
++#define DEBUG 1
++
++#if DEBUG
++#define DEBUGP printk
++#else
++#define DEBUGP(format, args...)
++#endif
++
++#define SECS	1000000		/* unit for wait_not_busy() is 1us */
++
++unsigned cf_head = 0;
++unsigned cf_cyl = 0;
++unsigned cf_spt = 0;
++unsigned cf_sectors = 0;
++static unsigned cf_block_size = 1;
++static void *baddr = 0;
++
++#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET))
++
++
++static void cf_do_tasklet(unsigned long dev_l);
++
++
++static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev)
++{
++	writeb(val, dev->baddr + ATA_REG_OFFSET + reg);
++}
++
++static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev)
++{
++	return readb(dev->baddr + ATA_REG_OFFSET + reg);
++}
++
++static inline int get_gpio_bit(gpio_func ofs, struct cf_mips_dev *dev)
++{
++	return (gpio_get(ofs) >> dev->pin) & 1;
++}
++
++static inline void set_gpio_bit(int bit, gpio_func ofs, struct cf_mips_dev *dev)
++{
++	gpio_set(ofs, (1 << dev->pin), ((bit & 1) << dev->pin));
++}
++
++static inline int cfrdy(struct cf_mips_dev *dev)
++{
++	return get_gpio_bit(DATA, dev);
++}
++
++static inline void prepare_cf_irq(struct cf_mips_dev *dev)
++{
++	set_gpio_bit(1, ILEVEL, dev);	/* interrupt on cf ready (not busy) */
++	set_gpio_bit(0, ISTAT, dev); 	/* clear interrupt status */
++}
++
++static inline int cf_present(struct cf_mips_dev* dev)
++{
++	/* TODO: read and configure CIS into memory mapped mode
++	 * TODO:   parse CISTPL_CONFIG on CF+ cards to get base address (0x200)
++	 * TODO:   maybe adjust power saving setting for Hitachi Microdrive
++	 */
++	int i;
++
++	/* setup CFRDY GPIO as input */
++	set_gpio_bit(0, FUNC, dev);
++	set_gpio_bit(0, CFG, dev);
++
++	for (i = 0; i < 0x10; ++i) {
++		if (rareg(i,dev) != 0xff)
++			return 1;
++	}
++	return 0;
++}
++
++static inline int is_busy(struct cf_mips_dev *dev)
++{
++	return !cfrdy(dev);
++}
++
++static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev)
++{
++	int us_passed = 0;
++	if (wait_for_busy && !is_busy(dev)) {
++		/* busy must appear within 400ns,
++		 * but it may dissapear before we see it
++		 *  => must not wait for busy in a loop
++		 */
++		ndelay(400);
++	}
++
++	do {
++		if (us_passed)
++			udelay(1);	/* never reached in async mode */
++		if (!is_busy(dev)) {
++			if (us_passed > 1 * SECS) {
++				printk(KERN_WARNING "cf-mips:   not busy ok (after %dus)"
++				       ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev));
++			}
++			return CF_TRANS_OK;
++		}
++		if (us_passed == 1 * SECS) {
++			printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us);
++		}
++		if (dev->async_mode) {
++			dev->to_timer.expires = jiffies + (to_us * HZ / SECS);
++			dev->irq_enable_time = jiffies;
++			prepare_cf_irq(dev);
++			if (is_busy(dev)) {
++				add_timer(&dev->to_timer);
++				enable_irq(dev->irq);
++				return CF_TRANS_IN_PROGRESS;
++			}
++			continue;
++		}
++		++us_passed;
++	} while (us_passed < to_us);
++
++	printk(KERN_ERR "cf-mips:  wait not busy timeout (%dus)"
++	       ", status 0x%02x, state %d\n",
++	       to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
++	return CF_TRANS_FAILED;
++}
++
++static irqreturn_t cf_irq_handler(int irq, void *dev_id)
++{
++	/* While tasklet has not disabled irq, irq will be retried all the time
++	 * because of ILEVEL matching GPIO pin status => deadlock.
++	 * To avoid this, we change ILEVEL to 0.
++	 */
++	struct cf_mips_dev *dev=dev_id;
++	
++	set_gpio_bit(0, ILEVEL, dev);
++	set_gpio_bit(0, ISTAT, dev);
++	
++	del_timer(&dev->to_timer);
++	tasklet_schedule(&dev->tasklet);
++	return IRQ_HANDLED;
++}
++
++static int do_reset(struct cf_mips_dev *dev)
++{
++	printk(KERN_INFO "cf-mips: resetting..\n");
++
++	wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev);
++	udelay(1);		/* FIXME: how long should we wait here? */
++	wareg(0, ATA_REG_DC,dev);
++
++	return wait_not_busy(30 * SECS, 1,dev);
++}
++
++static int set_multiple(struct cf_mips_dev *dev)
++{
++	if (dev->block_size <= 1)
++		return CF_TRANS_OK;
++
++	wareg(dev->block_size, ATA_REG_SC,dev);
++	wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
++	wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
++
++	return wait_not_busy(10 * SECS, 1,dev);
++}
++
++static int set_cmd(struct cf_mips_dev *dev)
++{
++	//DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd);
++	// sector_count should be <=24 bits..
++	BUG_ON(dev->tsect_start>=0x10000000);
++	// This way, it addresses 2^24 * 512 = 128G
++
++	if (dev->tsector_count) {
++		wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev);
++		wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev);
++		wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev);
++		wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev);
++	}
++	wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA,
++	      ATA_REG_DH,dev);	/* select drive on all commands */
++	wareg(dev->tcmd, ATA_REG_CMD,dev);
++	return wait_not_busy(10 * SECS, 1,dev);
++}
++
++static int do_trans(struct cf_mips_dev *dev)
++{
++	int res;
++	unsigned st;
++	int transfered;
++	
++	//printk("do_trans: %d sectors left\n",dev->tsectors_left);
++	while (dev->tsectors_left) {
++		transfered = 0;
++
++		st = rareg(ATA_REG_ST,dev);
++		if (!(st & ATA_REG_ST_DRQ)) {
++			printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st);
++			if (st & ATA_REG_ST_ERR) {
++				int errId = rareg(ATA_REG_ERR,dev);
++				printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
++				       (dev->tread ? "read" : "write"), st, errId);
++			}
++			return CF_TRANS_FAILED;
++		}
++		do { /* Fill/read the buffer one block */
++			u32 *qbuf, *qend;
++			qbuf = (u32 *)dev->tbuf;
++			qend = qbuf + CF_SECT_SIZE / sizeof(u32);
++			if (dev->tread) {
++			    while (qbuf!=qend)
++				put_unaligned(*DBUF32,qbuf++);
++				//*(qbuf++) = *DBUF32;
++			}
++			else {
++			    while(qbuf!=qend)
++				*DBUF32 = get_unaligned(qbuf++);
++			}
++
++			dev->tsectors_left--;
++			dev->tbuf += CF_SECT_SIZE;
++			dev->tbuf_size -= CF_SECT_SIZE;
++			transfered++;
++		} while (transfered != dev->block_size && dev->tsectors_left > 0);
++
++		res = wait_not_busy(10 * SECS, 1,dev);
++		if (res != CF_TRANS_OK)
++			return res;
++	};
++
++	st = rareg(ATA_REG_ST,dev);
++	if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) {
++		if (st & ATA_REG_ST_DRQ) {
++			printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s"
++			       ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st);
++		} else if (st & ATA_REG_ST_DWF) {
++			printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st);
++		} else {
++			int errId = rareg(ATA_REG_ERR,dev);
++			printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
++			       (dev->tread ? "read" : "write"), st, errId);
++		}
++		return CF_TRANS_FAILED;
++	}
++	return CF_TRANS_OK;
++}
++
++static int cf_do_state(struct cf_mips_dev *dev)
++{
++	int res;
++	switch (dev->tstate) {	/* fall through everywhere */
++	case TS_IDLE:
++		dev->tstate = TS_READY;
++		if (is_busy(dev)) {
++			dev->tstate = TS_AFTER_RESET;
++			res = do_reset(dev);
++			if (res != CF_TRANS_OK)
++				break;
++		}
++	case TS_AFTER_RESET:
++		if (dev->tstate == TS_AFTER_RESET) {
++			dev->tstate = TS_READY;
++			res = set_multiple(dev);
++			if (res != CF_TRANS_OK)
++				break;
++		}
++	case TS_READY:
++		dev->tstate = TS_CMD;
++		res = set_cmd(dev);
++		if (res != CF_TRANS_OK)
++			break;;
++	case TS_CMD:
++		dev->tstate = TS_TRANS;
++	case TS_TRANS:
++		res = do_trans(dev);
++		break;
++	default:
++		printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate);
++		return CF_TRANS_FAILED;
++	}
++	if (res != CF_TRANS_IN_PROGRESS)
++		dev->tstate = TS_IDLE;
++	return res;
++}
++
++static void cf_do_tasklet(unsigned long dev_l)
++{
++	struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
++	int res;
++
++	disable_irq(dev->irq);
++
++	if (dev->tstate == TS_IDLE)
++		return;		/* can happen when irq is first registered */
++
++#if 0
++	DEBUGP(KERN_WARNING "cf-mips:   not busy ok (tasklet)  status 0x%02x\n",
++	       (unsigned) rareg(ATA_REG_ST,dev));
++#endif
++
++	res = cf_do_state(dev);
++	if (res == CF_TRANS_IN_PROGRESS)
++		return;
++	cf_async_trans_done(dev,res);
++}
++
++static void cf_async_timeout(unsigned long dev_l)
++{
++	struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
++	disable_irq(dev->irq);
++	/* Perhaps send abort to the device? */
++	printk(KERN_ERR "cf-mips:  wait not busy timeout (%lus)"
++	       ", status 0x%02x, state %d\n",
++	       jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
++	dev->tstate = TS_IDLE;
++	cf_async_trans_done(dev,CF_TRANS_FAILED);
++}
++
++int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, 
++	char* buffer, int is_write)
++{
++	BUG_ON(dev->tstate!=TS_IDLE);
++	if (nsect > ATA_MAX_SECT_PER_CMD) {
++		printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect);
++		return CF_TRANS_FAILED;
++	}
++	if (sector + nsect > dev->sectors) {
++		printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector);
++		return CF_TRANS_FAILED;
++	}
++	dev->tbuf = buffer;
++	dev->tbuf_size = nsect*512;
++	dev->tsect_start = sector;
++	dev->tsector_count = nsect;
++	dev->tsectors_left = dev->tsector_count;
++	dev->tread = (is_write)?0:1;
++	
++	dev->tcmd = (dev->block_size == 1 ?
++		(is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) :
++		(is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE));
++
++	return cf_do_state(dev);
++}
++
++static int do_identify(struct cf_mips_dev *dev)
++{
++	u16 sbuf[CF_SECT_SIZE >> 1];
++ 	int res;
++	char tstr[17]; //serial
++	BUG_ON(dev->tstate!=TS_IDLE);
++	dev->tbuf = (char *) sbuf;
++	dev->tbuf_size = CF_SECT_SIZE;
++	dev->tsect_start = 0;
++	dev->tsector_count = 0;
++	dev->tsectors_left = 1;
++	dev->tread = 1;
++	dev->tcmd = ATA_CMD_IDENTIFY_DRIVE;
++
++	DEBUGP(KERN_INFO "cf-mips: identify drive..\n");
++	res = cf_do_state(dev);
++	if (res == CF_TRANS_IN_PROGRESS) {
++		printk(KERN_ERR "cf-mips: BUG: async identify cmd\n");
++		return CF_TRANS_FAILED;
++	}
++	if (res != CF_TRANS_OK)
++		return 0;
++
++	dev->head = sbuf[3];
++	dev->cyl = sbuf[1];
++	dev->spt = sbuf[6];
++	dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8];
++	dev->dtype=sbuf[0];
++	memcpy(tstr,&sbuf[12],16);
++	tstr[16]=0;
++	printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n",
++	       (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head,
++	       dev->spt, dev->sectors, dev->sectors >> 11,tstr);
++	return 1;
++}
++
++static void init_multiple(struct cf_mips_dev * dev)
++{
++	int res;
++	DEBUGP(KERN_INFO "cf-mips: detecting block size\n");
++
++	dev->block_size = 128;	/* max block size = 128 sectors (64KB) */
++	do {
++		wareg(dev->block_size, ATA_REG_SC,dev);
++		wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
++		wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
++
++		res = wait_not_busy(10 * SECS, 1,dev);
++		if (res != CF_TRANS_OK) {
++			printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n");
++			dev->block_size = 1;
++			return;
++		}
++		if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0)
++			break;
++		dev->block_size /= 2;
++	} while (dev->block_size > 1);
++
++	printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size);
++}
++
++int cf_init(struct cf_mips_dev *dev)
++{
++	tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev);
++	dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE);
++	if (!dev->baddr) {
++		printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n",
++		       (unsigned long) dev->base, CFDEV_BUF_SIZE);
++		return -EBUSY;
++	}
++
++	if (!cf_present(dev)) {
++		printk(KERN_WARNING "cf-mips: cf card not present\n");
++		iounmap(dev->baddr);
++		return -ENODEV;
++	}
++
++	if (do_reset(dev) != CF_TRANS_OK) {
++		printk(KERN_ERR "cf-mips: cf reset failed\n");
++		iounmap(dev->baddr);
++		return -EBUSY;
++	}
++
++	if (!do_identify(dev)) {
++		printk(KERN_ERR "cf-mips: cf identify failed\n");
++		iounmap(dev->baddr);
++		return -EBUSY;
++	}
++
++/*	set_apm_level(ATA_APM_WITH_STANDBY); */
++	init_multiple(dev);
++
++	init_timer(&dev->to_timer);
++	dev->to_timer.function = cf_async_timeout;
++	dev->to_timer.data = (unsigned long)dev;
++
++	prepare_cf_irq(dev);
++	if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) {
++		printk(KERN_ERR "cf-mips: failed to get irq\n");
++		iounmap(dev->baddr);
++		return -EBUSY;
++	}
++	/* Disable below would be odd, because request will enable, and the tasklet
++	  will disable it itself */
++	//disable_irq(dev->irq);
++	
++	dev->async_mode = 1;
++
++	return 0;
++}
++
++void cf_cleanup(struct cf_mips_dev *dev)
++{
++	iounmap(dev->baddr);
++	free_irq(dev->irq, NULL);
++#if REQUEST_MEM_REGION
++	release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE);
++#endif
++}
++
++
++/*eof*/
+diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.h
+--- linux.old/drivers/block/rb500/ata.h	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/ata.h	2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,143 @@
++/* CF-mips driver
++   This is a block driver for the direct (mmaped) interface to the CF-slot,
++   found in Routerboard.com's RB532 board
++   See SDK provided from routerboard.com.
++   
++   Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++   Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++   This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#ifndef __CFMIPS_ATA_H__
++#define __CFMIPS_ATA_H__
++
++#include <linux/interrupt.h>
++
++#define CFG_DC_DEV1	(void*)0xb8010010
++#define   CFG_DC_DEVBASE	0x0
++#define   CFG_DC_DEVMASK	0x4
++#define   CFG_DC_DEVC		0x8
++#define   CFG_DC_DEVTC		0xC
++
++#define CFDEV_BUF_SIZE	0x1000
++#define ATA_CIS_OFFSET	0x200
++#define ATA_REG_OFFSET	0x800
++#define ATA_DBUF_OFFSET	0xC00
++
++#define ATA_REG_FEAT	0x1
++#define ATA_REG_SC	0x2
++#define ATA_REG_SN	0x3
++#define ATA_REG_CL	0x4
++#define ATA_REG_CH	0x5
++#define ATA_REG_DH	0x6
++#define   ATA_REG_DH_BASE	0xa0
++#define   ATA_REG_DH_LBA	0x40
++#define   ATA_REG_DH_DRV	0x10
++#define ATA_REG_CMD	0x7
++#define ATA_REG_ST	0x7
++#define   ATA_REG_ST_BUSY	0x80
++#define   ATA_REG_ST_RDY	0x40
++#define   ATA_REG_ST_DWF	0x20
++#define   ATA_REG_ST_DSC	0x10
++#define   ATA_REG_ST_DRQ	0x08
++#define   ATA_REG_ST_CORR	0x04
++#define   ATA_REG_ST_ERR	0x01
++#define ATA_REG_ERR	0xd
++#define ATA_REG_DC	0xe
++#define   ATA_REG_DC_IEN	0x02
++#define   ATA_REG_DC_SRST	0x04
++
++#define ATA_CMD_READ_SECTORS	0x20
++#define ATA_CMD_WRITE_SECTORS	0x30
++#define ATA_CMD_EXEC_DRIVE_DIAG	0x90
++#define ATA_CMD_READ_MULTIPLE	0xC4
++#define ATA_CMD_WRITE_MULTIPLE	0xC5
++#define ATA_CMD_SET_MULTIPLE	0xC6
++#define ATA_CMD_IDENTIFY_DRIVE	0xEC
++#define ATA_CMD_SET_FEATURES	0xEF
++
++#define ATA_FEATURE_ENABLE_APM	0x05
++#define ATA_FEATURE_DISABLE_APM	0x85
++#define ATA_APM_DISABLED	0x00
++#define ATA_APM_MIN_POWER	0x01
++#define ATA_APM_WITH_STANDBY	0x7f
++#define ATA_APM_WITHOUT_STANDBY	0x80
++#define ATA_APM_MAX_PERFORMANCE	0xfe
++
++#define CF_SECT_SIZE	0x200
++/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */
++#define CF_KERNEL_MUL	1
++#define ATA_MAX_SECT_PER_CMD	0x100
++
++#define CF_TRANS_FAILED		0
++#define CF_TRANS_OK		1
++#define CF_TRANS_IN_PROGRESS	2
++
++
++enum trans_state {
++	TS_IDLE = 0,
++	TS_AFTER_RESET,
++	TS_READY,
++	TS_CMD,
++	TS_TRANS
++};
++
++// 
++// #if DEBUG
++// static unsigned long busy_time;
++// #endif
++
++/** Struct to hold the cfdev
++Actually, all the data here only has one instance. However, for 
++reasons of programming conformity, it is passed around as a pointer
++*/
++struct cf_mips_dev {
++	void *base; /* base address for I/O */
++	void *baddr; /* remapped address */
++
++	int pin; /* gpio pin */
++	int irq; /* gpio irq */
++	
++	unsigned head;
++	unsigned cyl;
++	unsigned spt;
++	unsigned sectors;
++	
++	unsigned short block_size;
++	unsigned dtype ; // ATA or CF
++	struct request_queue *queue;
++	struct gendisk  *gd;
++	
++	/* Transaction state */
++	enum trans_state tstate;
++	char *tbuf;
++	unsigned long tbuf_size;
++	sector_t tsect_start;
++	unsigned tsector_count;
++	unsigned tsectors_left;
++	int tread;
++	unsigned tcmd;
++	int async_mode;
++	unsigned long irq_enable_time;
++	
++	struct request *active_req; /* A request is being carried out. Is that different from tstate? */
++	int users;
++	struct timer_list to_timer;
++	struct tasklet_struct tasklet;
++
++	/** This lock ensures that the requests to this device are all done
++	atomically. Transfers can run in parallel, requests are all queued
++	one-by-one */
++	spinlock_t lock;
++};
++
++int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, 
++	char* buffer, int is_write);
++int cf_init(struct cf_mips_dev* dev);
++void cf_cleanup(struct cf_mips_dev* dev);
++
++void cf_async_trans_done(struct cf_mips_dev* dev, int result);
++// void *cf_get_next_buf(unsigned long *buf_size);
++
++#endif
+diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bdev.c
+--- linux.old/drivers/block/rb500/bdev.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/bdev.c	2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,339 @@
++/* CF-mips driver
++   This is a block driver for the direct (mmaped) interface to the CF-slot,
++   found in Routerboard.com's RB532 board
++   See SDK provided from routerboard.com.
++   
++   Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++   Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++   This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/time.h>
++#include <linux/wait.h>
++#include <linux/fs.h>
++#include <linux/genhd.h>
++#include <linux/blkdev.h>
++#include <linux/blkpg.h>
++#include <linux/hdreg.h>
++#include <linux/platform_device.h>
++
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <asm/rc32434/rb.h>
++
++#ifdef DEBUG
++#define DEBUGP printk
++#define DLEVEL 1
++#else
++#define DEBUGP(format, args...)
++#define DLEVEL 0
++#endif
++
++#define CF_MIPS_MAJOR 13
++#define MAJOR_NR	CF_MIPS_MAJOR
++#define CF_MAX_PART	16		/* max 15 partitions */
++
++#include "ata.h"
++
++//extern struct block_device_operations cf_bdops;
++
++// static struct hd_struct cf_parts[CF_MAX_PART];
++// static int cf_part_sizes[CF_MAX_PART];
++// static int cf_hsect_sizes[CF_MAX_PART];
++// static int cf_max_sectors[CF_MAX_PART];
++// static int cf_blksize_sizes[CF_MAX_PART];
++
++// static spinlock_t lock = SPIN_LOCK_UNLOCKED;
++
++// volatile int cf_busy = 0;
++
++static struct request *active_req = NULL;
++
++static int cf_open (struct inode *, struct file *);
++static int cf_release (struct inode *, struct file *);
++static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long);
++
++static void cf_request(request_queue_t * q);
++static int cf_transfer(const struct request *req);
++
++/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long);
++long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/
++// int (*direct_access) (struct block_device *, sector_t, unsigned long *);
++// int (*media_changed) (struct gendisk *);
++// int (*revalidate_disk) (struct gendisk *);
++
++static struct block_device_operations cf_bdops = {
++      .owner = THIS_MODULE,
++      .open = cf_open,
++      .release = cf_release,
++      .ioctl = cf_ioctl,
++      .media_changed = NULL,
++      .unlocked_ioctl = NULL,
++      .revalidate_disk = NULL,
++      .compat_ioctl = NULL,
++      .direct_access = NULL
++};
++
++
++int cf_mips_probe(struct platform_device *pdev)
++{
++	struct gendisk* cf_gendisk=NULL;
++	struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
++	struct cf_mips_dev *dev;
++	struct resource *r;
++	int reg_result;
++
++	reg_result = register_blkdev(MAJOR_NR, "cf-mips");
++	if (reg_result < 0) {
++		printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR);
++		return reg_result;
++	}
++
++	dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL);
++	if (!dev)
++		goto out_err;
++	memset(dev, 0, sizeof(struct cf_mips_dev));
++	cdev->dev = dev;
++	
++	dev->pin = cdev->gpio_pin;
++	dev->irq = platform_get_irq_byname(pdev, "cf_irq");
++	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase");
++	dev->base = (void *) r->start;
++	
++	if (cf_init(dev)) goto out_err;
++	printk("init done");
++	
++	spin_lock_init(&dev->lock);
++	dev->queue = blk_init_queue(cf_request,&dev->lock);
++	if (!dev->queue){
++		printk(KERN_ERR "cf-mips: no mem for queue\n");
++		goto out_err;
++	}
++	blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD);
++
++	/* For memory devices, it is always better to avoid crossing segments
++	inside the same request. */
++/*	if (dev->dtype==0x848A){
++		printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1);
++		blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1);
++	}*/
++
++	dev->gd = alloc_disk(CF_MAX_PART);
++	cf_gendisk = dev->gd;
++	cdev->gd = dev->gd;
++	if (!cf_gendisk) goto out_err; /* Last of these goto's */
++	
++	cf_gendisk->major = MAJOR_NR;
++	cf_gendisk->first_minor = 0;
++	cf_gendisk->queue=dev->queue;
++	BUG_ON(cf_gendisk->minors != CF_MAX_PART);
++	strcpy(cf_gendisk->disk_name,"cfa");
++	cf_gendisk->fops = &cf_bdops;
++	cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */
++	cf_gendisk->private_data=dev;
++	
++	set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL);
++	
++	/* Let the disk go live */
++	add_disk(cf_gendisk);
++#if 0
++	result = cf_init();
++	
++	/* default cfg for all partitions */
++	memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART);
++	memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART);
++	for (i = 0; i < CF_MAX_PART; ++i) {
++		cf_hsect_sizes[i] = CF_SECT_SIZE;
++		cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD;
++		cf_blksize_sizes[i] = BLOCK_SIZE;
++	}
++
++	/* setup info for whole disk (partition 0) */
++	cf_part_sizes[0] = cf_sectors / 2;
++	cf_parts[0].nr_sects = cf_sectors;
++
++	blk_size[MAJOR_NR] = cf_part_sizes;
++	blksize_size[MAJOR_NR] = cf_blksize_sizes;
++	max_sectors[MAJOR_NR] = cf_max_sectors;
++	hardsect_size[MAJOR_NR] = cf_hsect_sizes;
++	read_ahead[MAJOR_NR] = 8;	/* (4kB) */
++
++	blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST);
++
++	add_gendisk(&cf_gendisk);
++#endif
++// 	printk(KERN_INFO "cf-mips partition check: \n");
++// 	register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART,
++// 		      &cf_bdops, dev->sectors);
++	return 0;
++
++out_err:
++	if (dev->queue){
++		blk_cleanup_queue(dev->queue);
++	}
++	if (reg_result) {
++		unregister_blkdev(MAJOR_NR, "cf-mips");
++		return reg_result;
++	}
++	if (dev){
++		cf_cleanup(dev);
++		kfree(dev);
++	}
++	return 1;
++}
++
++static int
++cf_mips_remove(struct platform_device *pdev)
++{
++	struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
++	struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev;
++	
++	unregister_blkdev(MAJOR_NR, "cf-mips");
++	blk_cleanup_queue(dev->queue);
++
++	del_gendisk(dev->gd);
++	cf_cleanup(dev);
++	return 0;
++}
++
++
++static struct platform_driver cf_driver = {
++	.driver.name = "rb500-cf",
++	.probe = cf_mips_probe,
++	.remove = cf_mips_remove,
++};
++
++static int __init cf_mips_init(void)
++{
++	printk(KERN_INFO "cf-mips module loaded\n");
++	return platform_driver_register(&cf_driver);
++}
++
++static void cf_mips_cleanup(void)
++{
++	platform_driver_unregister(&cf_driver);
++	printk(KERN_INFO "cf-mips module removed\n");
++}
++
++module_init(cf_mips_init);
++module_exit(cf_mips_cleanup);
++
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR);
++
++
++static int cf_open(struct inode *inode, struct file *filp)
++{
++	struct cf_mips_dev  *dev=inode->i_bdev->bd_disk->private_data;
++	int minor = MINOR(inode->i_rdev);
++	
++	if (minor >= CF_MAX_PART)
++		return -ENODEV;
++	//DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor);
++	spin_lock(&dev->lock);
++	dev->users++;
++	spin_unlock(&dev->lock);
++	filp->private_data=dev;
++	
++	/* dirty workaround to set CFRDY GPIO as an input when some other
++	   program sets it as an output */
++	gpio_set(CFG, (1 << dev->pin), 0);
++	return 0;		/* success */
++}
++
++static int cf_release(struct inode *inode, struct file *filp)
++{
++	int minor = MINOR(inode->i_rdev);
++	struct cf_mips_dev  *dev=inode->i_bdev->bd_disk->private_data;
++	spin_lock(&dev->lock);
++	dev->users--;
++	spin_unlock(&dev->lock);
++	return 0;
++}
++
++static int cf_ioctl(struct inode *inode, struct file *filp,
++	 unsigned int cmd, unsigned long arg)
++{
++	unsigned minor = MINOR(inode->i_rdev);
++	struct cf_mips_dev  *dev=inode->i_bdev->bd_disk->private_data;
++
++	DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd);
++	switch (cmd) {
++	case BLKRRPART:	/* re-read partition table */
++		if (!capable(CAP_SYS_ADMIN))
++			return -EACCES;
++		printk(KERN_INFO "cf-mips partition check: \n");
++		register_disk(dev->gd);
++		return 0;
++
++	case HDIO_GETGEO:
++		{
++			struct hd_geometry geo;
++			geo.cylinders = dev->cyl;
++			geo.heads = dev->head;
++			geo.sectors = dev->spt;
++			geo.start = (*dev->gd->part)[minor].start_sect;
++			if (copy_to_user((void *) arg, &geo, sizeof (geo)))
++				return -EFAULT;
++		}
++		return 0;
++	}
++
++	return -EINVAL;		/* unknown command */
++}
++
++static void cf_request(request_queue_t * q)
++{
++	struct cf_mips_dev* dev;
++	
++	struct request * req;
++	int status;
++
++	/* We could have q->queuedata = dev , but haven't yet. */
++	if (active_req)
++		return;
++
++	while ((req=elv_next_request(q))!=NULL){
++		dev=req->rq_disk->private_data;
++		status=cf_transfer(req);
++		if (status==CF_TRANS_IN_PROGRESS){
++			active_req=req;
++			return;
++		}
++		end_request(req,status);
++	}
++}
++
++static int cf_transfer(const struct request *req)
++{
++	struct cf_mips_dev* dev=req->rq_disk->private_data;
++
++	if (!blk_fs_request(req)){	
++		if (printk_ratelimit())
++			printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]);
++		return CF_TRANS_FAILED;
++	}
++	
++	return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req));
++}
++
++void cf_async_trans_done(struct cf_mips_dev * dev,int result)
++{
++	struct request *req;
++	
++	spin_lock(&dev->lock);
++	req=active_req;
++	active_req=NULL;
++	end_request(req,result);
++	spin_unlock(&dev->lock);
++
++	spin_lock(&dev->lock);
++	cf_request(dev->queue);
++	spin_unlock(&dev->lock);
++}
++
+diff -urN linux.old/drivers/block/rb500/Makefile linux.dev/drivers/block/rb500/Makefile
+--- linux.old/drivers/block/rb500/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/Makefile	2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,3 @@
++## Makefile for the RB532 CF port
++
++obj-y		+= bdev.o ata.o
diff --git a/target/linux/rb1xx-2.6/patches/500-Nand.patch b/target/linux/rb1xx-2.6/patches/500-Nand.patch
new file mode 100644
index 0000000..05cc800
--- /dev/null
+++ b/target/linux/rb1xx-2.6/patches/500-Nand.patch
@@ -0,0 +1,27 @@
+diff -urN linux.old/drivers/mtd/nand/Kconfig linux.dev/drivers/mtd/nand/Kconfig
+--- linux.old/drivers/mtd/nand/Kconfig	2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Kconfig	2006-12-14 04:38:51.000000000 +0100
+@@ -75,6 +75,12 @@
+ 	help
+ 	  Support for NAND flash on Technologic Systems TS-7250 platform.
+ 
++config MTD_NAND_RB500
++	tristate "NAND Flash device on RB500 board"
++	depends on MTD_NAND
++	help
++	  Support for NAND flash on RB500 platform.
++
+ config MTD_NAND_IDS
+ 	tristate
+ 
+diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefile
+--- linux.old/drivers/mtd/nand/Makefile	2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Makefile	2006-12-14 04:38:51.000000000 +0100
+@@ -9,6 +9,7 @@
+ obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
+ obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
++obj-$(CONFIG_MTD_NAND_RB500)		+= rbmipsnand.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
+ obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/target/linux/rb1xx-2.6/profiles/100-Atheros.mk b/target/linux/rb1xx-2.6/profiles/100-Atheros.mk
new file mode 100644
index 0000000..0295868
--- /dev/null
+++ b/target/linux/rb1xx-2.6/profiles/100-Atheros.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Atheros
+  NAME:=Atheros WiFi (default)
+  PACKAGES:=kmod-madwifi
+endef
+
+define Profile/Atheros/Description
+	Package set compatible with hardware using Atheros WiFi cards
+endef
+$(eval $(call Profile,Atheros))
+
diff --git a/target/linux/rb1xx-2.6/profiles/105-Texas.mk b/target/linux/rb1xx-2.6/profiles/105-Texas.mk
new file mode 100644
index 0000000..727a0c0
--- /dev/null
+++ b/target/linux/rb1xx-2.6/profiles/105-Texas.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Texas
+  NAME:=Texas Instruments WiFi
+  PACKAGES:=kmod-acx
+endef
+
+define Profile/Texas/Description
+	Package set compatible with hardware using Texas Instruments WiFi cards
+endef
+$(eval $(call Profile,Texas))
+
diff --git a/target/linux/rb1xx-2.6/profiles/110-None.mk b/target/linux/rb1xx-2.6/profiles/110-None.mk
new file mode 100644
index 0000000..2fcfacd
--- /dev/null
+++ b/target/linux/rb1xx-2.6/profiles/110-None.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/None
+  NAME:=No WiFi
+  PACKAGES:=
+endef
+
+define Profile/None/Description
+	Package set without WiFi support
+endef
+$(eval $(call Profile,None))
+