summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-04-29 15:08:22 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-04-29 15:08:22 +0000
commit55fdc18beb870af93c9f3a60460484862c39c3b5 (patch)
treef2a9ae74a547525282d9f88e512d7ac7c4430c2e
parent8c60f7825b02d195c59502dc617f6e0fd9220b74 (diff)
downloadmtk-20170518-55fdc18beb870af93c9f3a60460484862c39c3b5.zip
mtk-20170518-55fdc18beb870af93c9f3a60460484862c39c3b5.tar.gz
mtk-20170518-55fdc18beb870af93c9f3a60460484862c39c3b5.tar.bz2
linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 31525
-rw-r--r--target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch253
1 files changed, 253 insertions, 0 deletions
diff --git a/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch b/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch
new file mode 100644
index 0000000..ac41528
--- /dev/null
+++ b/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch
@@ -0,0 +1,253 @@
+Index: linux-3.3/drivers/rtc/Kconfig
+===================================================================
+--- linux-3.3.orig/drivers/rtc/Kconfig 2012-03-20 07:52:18.838582040 +0100
++++ linux-3.3/drivers/rtc/Kconfig 2012-03-20 07:52:19.228579409 +0100
+@@ -379,6 +379,15 @@
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rv3029c2.
+
++config RTC_DRV_PT7C4338
++ tristate "Pericom Technology Inc. PT7C4338 RTC"
++ help
++ If you say yes here you get support for the Pericom Technology
++ Inc. PT7C4338 RTC chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-pt7c4338.
++
+ endif # I2C
+
+ comment "SPI RTC drivers"
+Index: linux-3.3/drivers/rtc/Makefile
+===================================================================
+--- linux-3.3.orig/drivers/rtc/Makefile 2012-03-20 07:52:18.838582040 +0100
++++ linux-3.3/drivers/rtc/Makefile 2012-03-20 07:52:19.228579409 +0100
+@@ -79,6 +79,7 @@
+ obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+ obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
+ obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
++obj-$(CONFIG_RTC_DRV_PT7C4338) += rtc-pt7c4338.o
+ obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
+ obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
+ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
+Index: linux-3.3/drivers/rtc/rtc-pt7c4338.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-3.3/drivers/rtc/rtc-pt7c4338.c 2012-03-20 07:52:19.228579409 +0100
+@@ -0,0 +1,216 @@
++/*
++ * Copyright 2010 Freescale Semiconductor, Inc.
++ *
++ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * This file provides Date & Time support (no alarms) for PT7C4338 chip.
++ *
++ * This file is based on drivers/rtc/rtc-ds1307.c
++ *
++ * PT7C4338 chip is manufactured by Pericom Technology Inc.
++ * It is a serial real-time clock which provides
++ * 1)Low-power clock/calendar.
++ * 2)Programmable square-wave output.
++ * It has 56 bytes of nonvolatile RAM.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++
++/* RTC register addresses */
++#define PT7C4338_REG_SECONDS 0x00
++#define PT7C4338_REG_MINUTES 0x01
++#define PT7C4338_REG_HOURS 0x02
++#define PT7C4338_REG_AMPM 0x02
++#define PT7C4338_REG_DAY 0x03
++#define PT7C4338_REG_DATE 0x04
++#define PT7C4338_REG_MONTH 0x05
++#define PT7C4338_REG_YEAR 0x06
++#define PT7C4338_REG_CTRL_STAT 0x07
++
++/* RTC second register address bit */
++#define PT7C4338_SEC_BIT_CH 0x80 /*Clock Halt (in Register 0)*/
++
++/* RTC control and status register bits */
++#define PT7C4338_CTRL_STAT_BIT_RS0 0x1 /*Rate select 0*/
++#define PT7C4338_CTRL_STAT_BIT_RS1 0x2 /*Rate select 1*/
++#define PT7C4338_CTRL_STAT_BIT_SQWE 0x10 /*Square Wave Enable*/
++#define PT7C4338_CTRL_STAT_BIT_OSF 0x20 /*Oscillator Stop Flag*/
++#define PT7C4338_CTRL_STAT_BIT_OUT 0x80 /*Output Level Control*/
++
++static const struct i2c_device_id pt7c4338_id[] = {
++ { "pt7c4338", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(i2c, pt7c4338_id);
++
++struct pt7c4338{
++ struct i2c_client *client;
++ struct rtc_device *rtc;
++};
++
++static int pt7c4338_read_time(struct device *dev, struct rtc_time *time)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ int ret;
++ u8 buf[7];
++ u8 year, month, day, hour, minute, second;
++ u8 week, twelve_hr, am_pm;
++
++ ret = i2c_smbus_read_i2c_block_data(client,
++ PT7C4338_REG_SECONDS, 7, buf);
++ if (ret < 0)
++ return ret;
++ if (ret < 7)
++ return -EIO;
++
++ second = buf[0];
++ minute = buf[1];
++ hour = buf[2];
++ week = buf[3];
++ day = buf[4];
++ month = buf[5];
++ year = buf[6];
++
++ /* Extract additional information for AM/PM */
++ twelve_hr = hour & 0x40;
++ am_pm = hour & 0x20;
++
++ /* Write to rtc_time structure */
++ time->tm_sec = bcd2bin(second & 0x7f);
++ time->tm_min = bcd2bin(minute & 0x7f);
++ if (twelve_hr) {
++ /* Convert to 24 hr */
++ if (am_pm)
++ time->tm_hour = bcd2bin(hour & 0x10) + 12;
++ else
++ time->tm_hour = bcd2bin(hour & 0xBF);
++ } else {
++ time->tm_hour = bcd2bin(hour);
++ }
++
++ time->tm_wday = bcd2bin(week & 0x07) - 1;
++ time->tm_mday = bcd2bin(day & 0x3f);
++ time->tm_mon = bcd2bin(month & 0x1F) - 1;
++ /* assume 20YY not 19YY */
++ time->tm_year = bcd2bin(year) + 100;
++
++ return 0;
++}
++
++static int pt7c4338_set_time(struct device *dev, struct rtc_time *time)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ u8 buf[7];
++
++ /* Extract time from rtc_time and load into pt7c4338*/
++ buf[0] = bin2bcd(time->tm_sec);
++ buf[1] = bin2bcd(time->tm_min);
++ buf[2] = bin2bcd(time->tm_hour);
++ buf[3] = bin2bcd(time->tm_wday + 1); /* Day of the week */
++ buf[4] = bin2bcd(time->tm_mday); /* Date */
++ buf[5] = bin2bcd(time->tm_mon + 1);
++
++ /* assume 20YY not 19YY */
++ if (time->tm_year >= 100)
++ buf[6] = bin2bcd(time->tm_year - 100);
++ else
++ buf[6] = bin2bcd(time->tm_year);
++
++ return i2c_smbus_write_i2c_block_data(client,
++ PT7C4338_REG_SECONDS, 7, buf);
++}
++
++static const struct rtc_class_ops pt7c4338_rtc_ops = {
++ .read_time = pt7c4338_read_time,
++ .set_time = pt7c4338_set_time,
++};
++
++static int pt7c4338_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct pt7c4338 *pt7c4338;
++ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
++ int ret;
++
++ pt7c4338 = kzalloc(sizeof(struct pt7c4338), GFP_KERNEL);
++ if (!pt7c4338)
++ return -ENOMEM;
++
++ pt7c4338->client = client;
++ i2c_set_clientdata(client, pt7c4338);
++ pt7c4338->rtc = rtc_device_register(client->name, &client->dev,
++ &pt7c4338_rtc_ops, THIS_MODULE);
++ if (IS_ERR(pt7c4338->rtc)) {
++ ret = PTR_ERR(pt7c4338->rtc);
++ dev_err(&client->dev, "unable to register the class device\n");
++ goto out_free;
++ }
++
++ return 0;
++out_free:
++ i2c_set_clientdata(client, NULL);
++ kfree(pt7c4338);
++ return ret;
++}
++
++static int __devexit pt7c4338_remove(struct i2c_client *client)
++{
++ struct pt7c4338 *pt7c4338 = i2c_get_clientdata(client);
++
++ rtc_device_unregister(pt7c4338->rtc);
++ i2c_set_clientdata(client, NULL);
++ kfree(pt7c4338);
++ return 0;
++}
++
++static struct i2c_driver pt7c4338_driver = {
++ .driver = {
++ .name = "rtc-pt7c4338",
++ .owner = THIS_MODULE,
++ },
++ .probe = pt7c4338_probe,
++ .remove = __devexit_p(pt7c4338_remove),
++ .id_table = pt7c4338_id,
++};
++
++static int __init pt7c4338_init(void)
++{
++ return i2c_add_driver(&pt7c4338_driver);
++}
++
++static void __exit pt7c4338_exit(void)
++{
++ i2c_del_driver(&pt7c4338_driver);
++}
++
++module_init(pt7c4338_init);
++module_exit(pt7c4338_exit);
++
++MODULE_AUTHOR("Priyanka Jain <Priyanka.Jain@freescale.com>");
++MODULE_DESCRIPTION("pericom Technology Inc. PT7C4338 RTC Driver");
++MODULE_LICENSE("GPL");