arc: Build uImage as well as vmlinux output files

Initially for ARC we were building vmlinux images because it
was both simpler and more convenient to debug Linux kernel
in runt-time via JTAG. Now when base system works quite nice
we may finally use U-Boot for loading the system image as
well. Still we keep building vmlinux images as some of our
boards are development boards and loading images with JTAG
could be at some points very beneficial.

Note for U-Boot header it's required to specify 2 values:
 * loading address
 * entry point (if it doesn't match loading address)

and in case of ARC entry point (EP) not only differs from
loading address but also changes from build to build due to
initramfs being placed between loading address and text section.
To accommodate that feature we have to calculate EP after
vmlinux gets built and before call to mkimage.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

2 files changed, 72 insertions, 16 deletions

diff --git a/target/linux/arc770/image/Makefile b/target/linux/arc770/image/Makefile
index 6b9c5e4..47c936e 100644
--- a/target/linux/arc770/image/Makefile
+++ b/target/linux/arc770/image/Makefile
@@ -7,6 +7,13 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+# On ARC initramfs is put before entry point and so entry point moves
+# in memory from build to built. Thus we need to extract EP from vmlinux
+# every time late in building process.
+define Build/calculate-ep
+	$(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(LINUX_DIR)/vmlinux | grep "Entry point address" | grep -o 0x.*))
+endef
+
 define Build/patch-dtb
 	$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
 	$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
@@ -16,26 +23,47 @@ endef
 define Device/Default
   PROFILES = Default $$(DEVICE_PROFILE)
   KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
-  KERNEL_SUFFIX := .elf
-  KERNEL_INITRAMFS := kernel-bin | patch-dtb
-  KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs.elf
   DEVICE_PROFILE :=
   DEVICE_DTS :=
 endef
 DEVICE_VARS += DEVICE_PROFILE DEVICE_DTS
 
-define add_arc770
-  define Device/$(1)
+define Device/vmlinux
+  KERNEL_SUFFIX := .elf
+  KERNEL_INITRAMFS := kernel-bin | patch-dtb
+  KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
+endef
+
+define Device/uImage
+  KERNEL_SUFFIX := .bin
+  KERNEL_INITRAMFS := kernel-bin | patch-dtb | calculate-ep | uImage none
+  KERNEL_LOADADDR := 0x80000000
+endef
+
+define add_arc770_uImage
+  define Device/$(1)-uImage
+    $(call Device/uImage)
+    DEVICE_PROFILE := $(1)
+    DEVICE_DTS := $(1)
+  endef
+  TARGET_DEVICES += $(1)-uImage
+endef
+
+define add_arc770_vmlinux
+  define Device/$(1)-vmlinux
+    $(call Device/vmlinux)
     DEVICE_PROFILE := $(1)
     DEVICE_DTS := $(1)
   endef
-  TARGET_DEVICES += $(1)
+  TARGET_DEVICES += $(1)-vmlinux
 endef
 
 # DesignWare AXS101
-$(eval $(call add_arc770,axs101))
+$(eval $(call add_arc770_vmlinux,axs101))
+$(eval $(call add_arc770_uImage,axs101))
 
 # nSIM with ARC770
-$(eval $(call add_arc770,nsim_700))
+$(eval $(call add_arc770_vmlinux,nsim_700))
+$(eval $(call add_arc770_uImage,nsim_700))
 
 $(eval $(call BuildImage))
diff --git a/target/linux/archs38/image/Makefile b/target/linux/archs38/image/Makefile
index 9b0e53f..03bd8ee 100644
--- a/target/linux/archs38/image/Makefile
+++ b/target/linux/archs38/image/Makefile
@@ -7,6 +7,13 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+# On ARC initramfs is put before entry point and so entry point moves
+# in memory from build to built. Thus we need to extract EP from vmlinux
+# every time before generation of uImage.
+define Build/calculate-ep
+	$(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(LINUX_DIR)/vmlinux | grep "Entry point address" | grep -o 0x.*))
+endef
+
 define Build/patch-dtb
 	$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
 	$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
@@ -16,26 +23,47 @@ endef
 define Device/Default
   PROFILES = Default $$(DEVICE_PROFILE)
   KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
-  KERNEL_SUFFIX := .elf
-  KERNEL_INITRAMFS := kernel-bin | patch-dtb
-  KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs.elf
   DEVICE_PROFILE :=
   DEVICE_DTS :=
 endef
 DEVICE_VARS += DEVICE_PROFILE DEVICE_DTS
 
-define add_archs38
-  define Device/$(1)
+define Device/vmlinux
+  KERNEL_SUFFIX := .elf
+  KERNEL_INITRAMFS := kernel-bin | patch-dtb
+  KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
+endef
+
+define Device/uImage
+  KERNEL_SUFFIX := .bin
+  KERNEL_INITRAMFS := kernel-bin | patch-dtb | calculate-ep | uImage none
+  KERNEL_LOADADDR := 0x80000000
+endef
+
+define add_archs38_uImage
+  define Device/$(1)-uImage
+    $(call Device/uImage)
+    DEVICE_PROFILE := $(1)
+    DEVICE_DTS := $(1)
+  endef
+  TARGET_DEVICES += $(1)-uImage
+endef
+
+define add_archs38_vmlinux
+  define Device/$(1)-vmlinux
+    $(call Device/vmlinux)
     DEVICE_PROFILE := $(1)
     DEVICE_DTS := $(1)
   endef
-  TARGET_DEVICES += $(1)
+  TARGET_DEVICES += $(1)-vmlinux
 endef
 
 # DesignWare AXS103
-$(eval $(call add_archs38,axs103_idu))
+$(eval $(call add_archs38_vmlinux,axs103_idu))
+$(eval $(call add_archs38_uImage,axs103_idu))
 
 # nSIM with ARCHS38
-$(eval $(call add_archs38,nsim_hs_idu))
+$(eval $(call add_archs38_vmlinux,nsim_hs_idu))
+$(eval $(call add_archs38_uImage,nsim_hs_idu))
 
 $(eval $(call BuildImage))