summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2013-02-04 22:40:57 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2013-02-04 22:40:57 +0000
commita1e3c0ca46dabc9ba5a904d0bf5726c251ffece5 (patch)
treed8b75912775ac952058a7205ad35bf307f9b2eb2
parentc2198aba320bf354de00cc76e1ae990da24ee1ec (diff)
downloadmtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.zip
mtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.tar.gz
mtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.tar.bz2
Add Failsafe support for Linksys E3000V1 / WRT610NV2
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
index fd2a935..1275b03 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -14,6 +14,7 @@ set_preinit_iface() {
# hardware specific overrides
case "$(cat /proc/diag/model)" in
"Linksys WAP54G V1") ifname=eth1;;
+ "Linksys E3000 V1"|"Linksys WRT610N V2") cpu_port="8u*";;
"ASUS WL-HDD") ifname=eth1;;
"ASUS WL-300g") ifname=eth1;;
"ASUS (unknown, BCM4702)") ifname=eth1;;