add profile for the Edimax 3g-6200NL board

http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172

8 files changed, 92 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 4078528..de5a542 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -52,6 +52,7 @@ case "$FIRMWARE" in
 		;;
 
 	3g-6200n | \
+	3g-6200nl | \
 	3g300m | \
 	air3gii | \
 	all0239-3g | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 104f201..6549726 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -18,6 +18,9 @@ case $board in
 		set_wifi_led "edimax:amber:wlan"
 		set_usb_led "edimax:blue:3g"
 		;;
+	3g-6200nl)
+		set_wifi_led "edimax:green:wlan"
+		;;
 	3g300m)
 		set_usb_led "tenda:blue:3g"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index d6ab75a..7d30f72 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -46,6 +46,7 @@ ramips_setup_interfaces()
 		;;
 
 	dir-615-h1 | \
+	3g-6200nl | \
 	wl-330n)
 		ucidef_set_interface_lan "eth0.1"
 		;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index fcfb86b..e860309 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -10,6 +10,7 @@ preinit_set_mac_address() {
 
 	case $(ramips_board_name) in
 	3g-6200n |\
+	3g-6200nl |\
 	3g300m | \
 	mzk-w300nh2 |\
 	wl-330n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 6638b0a..2a713f8 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -33,6 +33,9 @@ ramips_board_detect() {
 	*"Edimax 3g-6200n")
 		name="3g-6200n"
 		;;
+	*"Edimax 3g-6200nl")
+		name="3g-6200nl"
+		;;
 	*"AirLive Air3GII")
 		name="air3gii"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 97cc382..a6f52cd 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -15,6 +15,7 @@ platform_check_image() {
 
 	case "$board" in
 	3g-6200n | \
+	3g-6200nl | \
 	3g300m | \
 	air3gii | \
 	all0239-3g | \
diff --git a/target/linux/ramips/dts/3G-6200NL.dts b/target/linux/ramips/dts/3G-6200NL.dts
new file mode 100644
index 0000000..f57ccfb
--- /dev/null
+++ b/target/linux/ramips/dts/3G-6200NL.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "3G-6200N", "ralink,rt3050-soc";
+	model = "Edimax 3g-6200n";
+
+	memorydetect {
+		ralink,memory = <0x0 0x200000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wlan {
+			label = "edimax:amber:wlan";
+			gpios = <&gpio0 14 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index bb88921..01425b4 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -238,7 +238,9 @@ endif
 #
 
 edimax_3g6200n_mtd_size=3735552
-Image/Build/Profile/3G6200N=$(call BuildFirmware/CustomFlash/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size))
+Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
+
+Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-6200NL,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
 
 Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
 
@@ -397,6 +399,7 @@ Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j
 ifeq ($(SUBTARGET),rt305x)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/3G6200N,$(1))
+	$(call Image/Build/Profile/3G6200NL,$(1))
 	$(call Image/Build/Profile/3G300M,$(1))
 	$(call Image/Build/Profile/AIR3GII,$(1))
 	$(call Image/Build/Profile/ALL02393G,$(1))